Systemair CB 315-60-400V 2 Duct Heater
Systemair CB 315-60-400V 2 Duct Heater
Description
Electrical duct heater
Duct heater with spigot connection for standard spiral ducts. Manufactured from Aluzinc-coated sheet
steel with a heating element in stainless steel. The heater has integral overheating protection with a
manual reset function. The CB heater has rubber seals on the connecting spigots. Suitable for control
by room thermostat or Pulser. The minimum air volume is based on a minimum air velocity of 1.5 m/s.
These duct heaters are designed for a maximum output air temperature of 50°C. The CB can be
installed in a horizontal or vertical duct. In a horizontal duct, the connection box should be installed...
Find more details in our online catalogue
Nominal data
Phase(s) 2~
Input current 15 A
øD= 315 mm
Duct dimension; Circular, inlet 315 mm
Others
A = Heating elements
E = Interlocking
Article name: CB 315-6,0 400V/2 Duct heater | Product link: https://shop.systemair.com/sr-RS/productPermalink?p=107673 | Item number: 5374 | Variant: 400V 2~ |
Document type: Product card | Created at: 2022-04-03 | Generated by: Systemair Online Catalogue | Language: српски
Page 1 of 2
Calculation result
Voltage 400 V
Phases 2
Current 15.00 A
Pressure drop 0 Pa
Accessories
Pulser M Temperature control (5144) DTV500A (96807)
TG-K330 Duct Sensor 0-30°C (5160) TG-K360 Duct sensor 0-60°C (4846)
Documents
CB-CBM-CBMF_FITTING INSTRUCTION.pdf
DECL__OF_CONFORMITY_CB_CBM_CBMF_CBMB_2020-09.PDF
Article name: CB 315-6,0 400V/2 Duct heater | Product link: https://shop.systemair.com/sr-RS/productPermalink?p=107673 | Item number: 5374 | Variant: 400V 2~ |
Document type: Product card | Created at: 2022-04-03 | Generated by: Systemair Online Catalogue | Language: српски
Page 2 of 2