Scribd
Upload
37 views3 pages

Bomb Blanket

Uploaded by

ashwin tripathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
37 views3 pages

Bomb Blanket

Uploaded by

ashwin tripathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 3
Bharat SarkariGovernment of India Grina Mantralaya/Ministry of Home Affairs PM Division/Prov. | Desk 26, Man Singh Road, Jaisalmer House New Delhi, Dated: August, 2012 ‘Subject : Technical Specifications/QRs for Bomb Blanket. The Technical Specifications/GRs for Bomb Blanket es per Annexure has been accepted by the Competent Authority in MHA. 2. Henceforth, all the CAPFs should procure the above items required by them strictly as per the laid down Technical Specifications/QRs. 3. The trial directive for Bomb Blanket will be circulated later after these are got prepared by NSG and approved by the competent authority in MHA. 6 i Nanda) Under Secretary to the Govt. of India Tel : 23381278 MV Gs : Assam Rifles (nrough LOAR)/BSFICISF/CRPFNTBPINSGISSBIBPRED MHA UO no. IV-17018/3/2007-Prov.|, Dated, August, 2012 qs: ips Hog RY NSG is requested to formulate the trial directives for Bomb Blanket keeping in view the instructions issued by MHA on 13.06.2012 and forward the same to the Ministry for approval at the earliest Xe (S. B Nanda) Under Secretary to the Govt. of India Tel: 23381278 Copy to: N\S( Director (Procurement), MHA. (i) PS to JS (PM) REVISED QRS OF BOMB BLANKET 1. The Bomb Blanket should offer protection against blast, thermal and fragmentation effect resulting from the detonation of explosives (STAGNAG 2920 V50 @ not less than 665 m/sec). The firm will have to produce certificate from a nationalfinternational accredited tab. 2. The Bomb Blanket should be made with multiple layers of suitable aramid fabric and should conform to the protection level required and then sewn into a fire retardant water repellent cover. 3. The Bomb Blanket should consist of an integral Blast containment ring to deter side fragmentation discharge and to direct the force of the blast upwards 4. The Bomb Blanket design and material used for manufacture should permit taking X-ray of the suspected device, without being lifted. 5. The Bomb Blanket should permit effective firing of Disruptors on the suspected device without being lifted. 6. The Bomb Blanket should easily cover a suspected device of min size of 40cm x 30cm x 40cm without making any contacts, 7. The Bomb Blanket should provide easy lifting facility and should have no filling or strapping of blanket while deployment, 8. Weight of Bomb Blanket should not be more than 40 kgs including blast containing ring. 9. The Bomb Blanket should offer protection against blast, thermal and fragmentation effect resulting out of blast effect of 2 kgs TNT equivalent explosives alongwith minimum 100gms of nails/nuts as fragments 10. The storage life of the Bomb Blanket should be 7 years. | Miscellaneous, The firm should be able to provide the following as jlicable along with the equipment:- / J (@) Cleaning kit, if any { j (b) Users hand book & technical manual giving full description of the item. / (cy Literature on preservation technique as applicable. (d) Suitable ruggedized carrying case, ; wortecy, i ee foo bP 5 Pare Adc aL iy Gee Sum!) eo 5 yon Lb we — (Subhash Joshi) Director General, NSG

You might also like