Scribd
Upload
31 views

Rfid Based Tollbridge: A Project Report On

The document is a project report on an RFID-based toll bridge system submitted for a bachelor's degree. It describes the main components used in the toll bridge system, including Holtek encoders, transmitters, receivers, and a microcontroller. It also details the main receiver circuit design and components. The report concludes that the project demonstrates an RFID-based toll bridge prototype that classifies vehicles by category (light, heavy, theft) and displays messages on an LCD screen before opening the toll bridge.

Uploaded by

deepakchauhan11220
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
31 views

Rfid Based Tollbridge: A Project Report On

The document is a project report on an RFID-based toll bridge system submitted for a bachelor's degree. It describes the main components used in the toll bridge system, including Holtek encoders, transmitters, receivers, and a microcontroller. It also details the main receiver circuit design and components. The report concludes that the project demonstrates an RFID-based toll bridge prototype that classifies vehicles by category (light, heavy, theft) and displays messages on an LCD screen before opening the toll bridge.

Uploaded by

deepakchauhan11220
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

A

PROJECT REPORT

on

RFID BASED TOLLBRIDGE

Submitted for partial fulfillment of award of

B.Tech Degree

in

Electronics & Communication Engineering

NOIDA INSTITUTE OF ENGINEERING & TECHNOLOGY, GREAT


2010-2011

SUBMITTED BY:- SUBMITTED TO

ANCHAL MODI Mr.S P SINGH


(0713331013) Assistant professor
Department of ECE
CERTIFICATE

This is to certify that the Project report entitled“RF ID BASED TOLL BRIDGE” is a
record of the bonafide work done by Anchal modi(0713331013) under our supervision and
guidance.

This report is submitted to the Noida Institute of Engineering & Technology as a part of
syllabus prescribed by GAUTAM BUDHA TECHNICAL UNIVERSITY, LUCKNOW for
the Degree of Bachelor of Technology (Electronics & communication Engineering) During
the academic year of 2010-11.

We wish best for his endeavor.

Mr.S P SINGH Dr. V. K. Pandey


Assistant professor Head of the Department
Electronics & Comm. Engg. Electronics & Comm. Engg.
TABLE OF CONTENTS

S.NO. NAME OF TOPIC PAGE


NO.
1 Introduction 1
2 Main Components 2
(i) General Description 3
(ii) Features 3
(iii) Applications 3
(iv) HOLTEK encoders 4
(v) TWS-434 8
(vi) RWS-434 10
3 Main Receiver Circuit 12
(i) Components Used 14
(ii) Bridge Rectifier 16
(iii) Regulator (7805) 17
(iv) Oscillator 17
(v) Capacitors 18
(vi) Diodes 19
(vii) Resistors 21
(viii) Transistors 23
(ix) Liquid Crystal Display 25
(x) Transformer 28
4 Basics Of Microcontroller 33
(i) Architecture 34
(ii) Pin functions 37
5 Coding Steps 44
6 Conclusion 81

7 References 82
LIST OF FIGURES

FIGURE TOPIC PAGE


NO. NO.
1 HOLTEK Encoder(HT-12E) 4
2 Pin description of HT-12E 5
3 Transmitter(TWS-434) 8
4 Sample Transmitter Application Circuit 9
5 Receiver (RWS-434) 10
6 Sample Transmitter Application Circuit 11
7 Main Receiver Circuit 15
8 Regulator (7805) 17
9 Capacitors 18
8 Diodes 20
9 Resistance 22
10 Transistor 24
11 Liquid crystal display 27
12 Transformer 28

ABSTRACT

This paper describe a prototype that has been developed to demonstrate the concept of
“RFID BASED TOLL BRIDGE”. It begings with Introduction of the project and
background of “RFID BASED TOLL BRIDGE”. It then describe the need of the toll bridge
and technology used in the development of toll bridge. It also include the description of
components used in the project and their propertied where needed. It also describe the
soldering and desoldering methods and then flow diagram and working of the project.

In this project we have tried to give the idea of toll bridge. We are using microcontroller
89S51 as cpu. The motion is controlled by DC motor, for displaying message in the toll
bridge we are using Intelligent LCD display of two lines. The toll bridge designed for three
types of vehicle category, named as LIGHT VEHICLE, HEAVY VEHICLE, and THEFT
VEHICLE. There is LCD display for showing various messages in the toll bridge. Before
opening the toll bridge the buzzer blows.

You might also like