MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik

A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
Projection of Lines and Planes

a) Line ‘AB’ is 70 mm long. Its FV and TV measure 40 mm and 60 mm respectively. End ‘A’ is
15 mm above HP and 20 mm in front of V.P. Draw projections of line ‘AB’ if end ‘B’ is in first
quadrant. Find angle with HP and VP. (S-2018)

Ans:

b) Distance between end projectors A and B of line AB is 60 mm. End A of the line is 20 mm
above H.P. and 40 mm infront of V.P. End B of the line is 50 mm above the H.P. and 40 mm
infront of V.P. Draw the projection of line AB and find out inclination with H.P. and its true
length. (S-2019)

Ans:

1
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
c) The top view of 80 mm long line CD measures 68 mm, while the length of its F.V. measures
54 mm. Its one end C is in HP and 15 mm in front of VP. Draw projection of CD and
determine its incination with HP& VP. Also locate traces of the line. (W-2018)

Ans:

d) A line AP, 75 mm long has its end A in both HP & VP. It is inclined at an angle of 30 0 to HP &
450 to VP. Draw the projections. (W-2019)

Ans:

2
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
e) A circular plate of negligible thickness of 50 mm diameter is resting on HP on one of its points
of circumference. The plate is perpendicular to VP and inclined to HP by 30º. Draw its
projections. (S-2018)

Ans:

a) An isosceles triangle ‘ABC’ of base ‘AB’ 40 mm and altitude 70 mm has its base ‘AB’ in V.P.
and perpendicular to HP. The triangle is inclined to VP so that front view obtained is an
equilateral triangle. Draw the projections and find the inclination of plane with VP. (S-2018)

Ans:

3
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
b) A circular plate of diameter 60 mm is kept on the H.P. on a point of its circumference. The
surface of circular plate make an angle of 400 to H.P. and perpendicular to V.P. Draw three
views. (S-2019)

Ans:

a) A 300 – 600 set square ABC has side AB equal to 70 mm. It is resting on the H.P. with AB
perpendicular to V.P. and plane of set square inclined at 45 0 to H.P. & parallel to V.P. Draw
the projections. (S-2019)

Ans:

4
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
b) A circular plate of 40 mm dia. is resting on point of circumference on H.P. The plane of plate
is normal to V.P. and inclined at 450 to H.P. A central square hole of 15 mm side is cut
centrally through it. Take all sides of hole equally inclined to V.P. Draw (i) FV (ii) Top view.
(W-2018)

Ans:

c) A semi-circular plate of 60 mm dia. has a straight edge in the V.P. and perpendicular to H.P.
The surface of plate is inclined at 300 to V.P. Draw the projections. (W-2018)

Ans:

5
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
d) A hexagonal lamina of 24 mm side has its surface inclined at 300 to HP and resting on one of
its corner on HP. Draw its projections. (W-2019)

Ans:

c) A pentagonal lamina of 40 mm side has a circular hole of 35 mm diameter of its centre. It

Ans:

6
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
Projection of Solids

d) Fig. 1 shows front view and right hand side views of a regular pentagonal prism :
(i) Add the top view (Use first angle method of projection)
(ii) State the positions of planes ABCDE and ABGF with respect to reference planes.
(S-2018)

Fig. 1
Ans:

e) A right circular cone of 40 mm diameter base and 60 mm axis length is resting on a point of
its circumference on HP with axis inclined at 30º to HP and parallel to VP. What will be the
shape of its front view, top view, right hand and left hand side views? S-2018)

Ans:

7
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I

f) A pentagonal pyramid base 30 mm side and axis 60 mm long is standing on a corner of its
base on HP. Draw its projections when the slant edge containing that corner makes an angle
of 45º to HP with axis parallel to VP. (S-2018)

8
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
g) A pentagonal prism base 25 mm side and axis 60 mm long is standing on a corner of base
on H.P. with axis inclined at 450 to H.P. and parallel to V.P. Draw the projections. (S-2019)

Ans:

h) A right circular cone, base 50 mm diameter and axis 60 mm long, is resting on its apex on
H.P. Draw the projections, when axis is parallel to V.P. and inclined at 450 to H.P. (S-2019)

Ans:

9
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
i) A cone is lying on the H.P. on its curved surface with its axis parallel to V.P.
What will be the top view of base ?
(i) Circle
(ii) Square
(iii) Ellipse
j) Draw the projection of cone having 40 mm base diameter and 60 mm axis lying on H.P. on
one of its generator with axis parallel to V.P. (W-2018)

Ans:

k) Draw projection of cylinder 50 mm dia. and 70 mm axis resting on its circumference in H.P.
with axis inclined at 450 to V.P. by auxiliary plane method. (W-2018)
Ans:

10
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I

l) A pentagonal pyramid having side of base 30 mm and axis 65 mm long is resting in H.P. on
one of its base corners. Draw its projections, if slant edge containing that corner makes an
angle 450 to HP and its axis parallel to V.P. (W-2018)
Ans:

m) Draw the projections of a cube of side 40 mm when it rests on the ground on one of its
corners and a face containing that corner is inclined at 30 0 to ground and perpendicular to
VP. (W-2019)

11
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
Ans:

n) A triangular prism, side of base 30 mm & height 60 mm lies with one of its longer edges on
H.P., such that its axis is parallel to V.P. Draw its projections. (W-2019)

Ans:

12
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I

o) A square pyramid, side of base 40 mm, axis length 60 mm lying on the VP on one of its slant
edge. Draw the projections of the pyramid when its axis is parallel to HP. (W-2019)

Ans:

13
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
Section of Solids

a) A square prism base 40 mm side and axis 80 mm long is resting on HP on its base with all
vertical faces equally inclined to VP. It is cut by a plane perpendicular to VP and inclined to
HP by 60º, passing through a point on axis 55 mm above HP. Draw i) front view ii) Sectional
TV iii) True shape of section. (S-2018)

Ans:

b) A right circular cone, 50 mm diameter base and 70 mm height is resting on its base on HP. It
is cut by a section plane perpendicular to VP and inclined at 45º to HP. The cutting plane
cuts the axis at a point 30 mm from the apex. Draw : (i) Front view (ii) Sectional top
view (iii) Sectional side view (iv) True shape of section (S-2018)

Ans:

14
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I
c) A cylinder, base diameter 60 mm and axis length 80 mm is kept on the H.P. on its base. It is
cut by section plane in such a way that the true shape of the section is the largest possible
ellipse. Draw i) Front View ii) Sectional Top View iii) True Shape of Section (S-2019)

Ans:

d) A square pyramid, side of base 30 mm and height 50 mm is resting on its base with one of
the side of the base perpendicular to the V.P. It is cut by a section plane, inclined at 45 0 to
the H.P. in such a way that it bisects the axis. Draw :
(i) Front view
(ii) Sectional Top view
(iii) True shape of the section. (S-2019)

15
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I

Ans:

e) A tetrahedron of 60 mm edges stands on a face on the ground with an edge contained by

16
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I

f) A square prism is resting on its base on H.P. such that all the vertical faces are equally
inclined to V.P. It is cut by an Auxillary inclined plane in such a way that true shape of section
is a rhombus of maximum diagonal length 100 mm and minimum diagonal length 50 mm.
Draw (i) F.V. (ii) Sectional T.V. (iii) True shape of section. Determine side and height of
prism. (W-2018)\
Ans:

17
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I

g) A hexagonal prism, base 30 mm side and axis 70 mm long has a rectangular face on the
H.P. with its axis parallel to VP. A vertical section plane inclined at 45 0 to VP cuts it at a point
on the axis, 20 mm from one end.
h) Draw :
(i) Top view
(ii) Sectional front view
(iii) True shape of section (W-2019)

Ans:

18
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I

i) A cylinder of 50 mm diameter & 70 mm height has its axis vertical, it is cut by a section
plane perpendicular to VP and inclined at 45 0 to HP and intersecting the axis 40 mm
above the base.Draw :
(i) Front view
(ii) Sectional top view
(iii) True shape of section (W-2019)

Ans:

19
Subject Teacher: Prof. S.A.Mandore
 MET’s IOT- Polytechnic, Bhujbal Knowledge City, Nasik
A.Y. 2019-20
Course code: ME 2 I Sub/Code: EDR/22207 Class: FYME
Question Bank for Class Test-I

20
Subject Teacher: Prof. S.A.Mandore