Infineum P5096

Description
Infineum P5096 is a performance additive package developed for mainstream gasoline engine lubricants,
covering both current and obsolete API performance levels. It is designed to be used with appropriate boosters
and Infineum viscosity modifiers in appropriate Group I and Group II base stocks at various viscosity grades.

Performance
Performance Level: SAE Viscosity Grade: Mass %:
10W-30, 10W-40, 15W-40, 20W-50, 30,
API SL/SJ 6.4
40
API SL/SJ 15W-40, 20W-40, 30, 40 6.4 + Infineum C9330 at 0.25 %

API SG/CF-4 10W-30, 15W-40, 20W-50 7.3 + Infineum C9330 at 0.3 %

10W-30, 10W-40, 15W-40, 15W-50, 20W-
API CF-2 3.8 + Infineum C9330 at 0.7 %
40, 20W-50
API CF-2 30, 40, 50 3.8 + Infineum C9330 at 0.4 %
10W-30, 15W-40, 20W-40, 20W-50, 30,
API SH/SG/CD 5.0 + Infineum C9330 at 0.2 %
40, 50
API SF/CF 10W-30, 15W-40, 20W-40, 20W-50 4.5 + Infineum C9330 at 0.85 %

API SF/CF 20W, 30, 40, 50 4.5 + Infineum C9330 at 0.5 %

API CF 15W-40, 20W-40, 20W-50 3.1 + Infineum C9330 at 1.3 %

API CF 20W, 30, 40, 50 3.1 + Infineum C9330 at 0.9 %

API SF/SE/CD 10W-30, 15W-40, 20W-40, 20W-50 4.5 + Infineum C9330 at 0.4 %

API SD/SC/CC 10W-30, 15W-40, 20W-40, 20W-50 2.3 + Infineum C9330 at 0.5 %

API SB/CB 20W, 30, 40, 50 2.0 + Infineum C9330 at 0.2 %

Licensible claims for SL/SJ is only valid in approved Gp I and Gp II basestocks
Quality claims are valid when blended in all quality Gp I and Gp II basestocks. ~ 5.7 vol % approx
API CF quality claims at 6.4%m valid in specific basestocks, viscosity modifiers and viscosity grades only. Consult your
Infineum technical representative for more information.

Typical Inspections
(a) (b)
Property: Value : Unit: Method :
Appearance Brown viscous liquid ITM 50-022

Base Number 90.3 mg KOH/g ASTM D2896

Calcium 2.75 %(m) ASTM D5185

Density @ 15 C, kg/m3 990 kg/m3 ASTM D4052

Density @ 60 F, lb/gal 8.25 lb/USG ASTM D4052

Flash Point Deg C 184 °C ASTM D93

Kinematic Viscosity @ 100 C 165 cSt ASTM D445

Kinematic Viscosity @ 40 C 3700 cSt ASTM D445

Molybdenum 0.04 %(m) ASTM D5185

Nitrogen 0.66 %(m) ASTM D5291

Phosphorus 1.56 %(m) ASTM D5185

Sulfated Ash 12.5 %(m) ASTM D874

Sulfur 3.7 %(m) ASTM D4294

Zinc 1.72 %(m) ASTM D5185

(a)Not a specification, (b)Methods typically used by Infineum manufacturing plants

Handling / Precautions

Version: 6 November 2012 (1.0)

The information contained in this document is based upon data believed to be reliable and relates only to the matters specifically mentioned in this document. Although Infineum has used reasonable skill and care in the preparation
of this information as of the date below, in the absence of any overriding obligations arising under a specific contract to supply goods or services: no representation, warranty (express or implied), or guarantee is made as to the
suitability, accuracy, reliability or completeness of the information; nothing in this document shall reduce the user’s responsibility to satisfy itself as to the suitability, accuracy, reliability, and completeness of such information for its
particular use; there is no warranty against intellectual property infringement; and Infineum shall not be liable for any loss, damage or injury that may occur from the use of this information other than death or personal injury caused by
its negligence. No statement shall be construed as an endorsement of any product or process. For greater certainty, before use, particularly if the product is used for a purpose or under conditions which are abnormal or not
reasonably foreseeable, this information must be reviewed with the supplier.

'Infineum', 'Dobanax', 'Paratac', 'Synacto', 'Vektron', 'Vistone' and the corporate mark comprising the interlocking ripple device are trademarks of Infineum International Limited.

© Copyright Infineum International Limited [2012]. All rights reserved.

Follow precautions normally taken for handling lube oil stocks. This product is temperature sensitive. Do not heat
over the maximum loading/unloading temperature to avoid possible release of extremely odorous alkyl
mercaptans and/or toxic hydrogen sulfide.

Localized high temperatures should be avoided during heating, especially when product cannot be agitated.
Electrical, steam or hot oil heating systems with a self limiting maximum temperature not exceeding 120 Deg.
C/250 Deg. F (e.g. low pressure steam at 2 bar(g) or 30 psig) are recommended.

Min Load/Unload Temp: 55 °C (131 ° F)

Max Load/Unload Temp: 65 °C (149 ° F)
Vis @ Min Load/Unload Temp: 1,390 cSt
Vis @ Max Load/Unload Temp: 790 cSt
Maximum Storage Temperature: 60 °C (140 ° F)
Do not reheat above: 65 °C (149 ° F)

For detailed data please refer to the relevant MSDS.

Further Information
For further information please contact your local Infineum affiliate or representative.

Version: 6 November 2012 (1.0)

The information contained in this document is based upon data believed to be reliable and relates only to the matters specifically mentioned in this document. Although Infineum has used reasonable skill and care in the preparation
of this information as of the date below, in the absence of any overriding obligations arising under a specific contract to supply goods or services: no representation, warranty (express or implied), or guarantee is made as to the
suitability, accuracy, reliability or completeness of the information; nothing in this document shall reduce the user’s responsibility to satisfy itself as to the suitability, accuracy, reliability, and completeness of such information for its
particular use; there is no warranty against intellectual property infringement; and Infineum shall not be liable for any loss, damage or injury that may occur from the use of this information other than death or personal injury caused by
its negligence. No statement shall be construed as an endorsement of any product or process. For greater certainty, before use, particularly if the product is used for a purpose or under conditions which are abnormal or not
reasonably foreseeable, this information must be reviewed with the supplier.

'Infineum', 'Dobanax', 'Paratac', 'Synacto', 'Vektron', 'Vistone' and the corporate mark comprising the interlocking ripple device are trademarks of Infineum International Limited.

© Copyright Infineum International Limited [2012]. All rights reserved.