Scribd
Upload
74 views4 pages

WLAN BT Update 19 40 0 FM W10eng

1. The document provides instructions for updating the WLAN and Bluetooth drivers for various Intel wireless adapters including Intel Dual Band Wireless-AC 8260, 7265, 7260, and 7260 on Windows 10 devices. 2. It lists several precautions to take before updating such as being an administrator, being plugged in, disconnecting from networks, and closing unnecessary programs. 3. The process involves checking the current version, downloading and extracting update files, then running .bat files to update the WLAN driver first which may reset settings, followed by optionally updating the Bluetooth driver which requires uninstalling the old driver and re-pairing devices.

Uploaded by

Electroventica Electroventica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views4 pages

WLAN BT Update 19 40 0 FM W10eng

1. The document provides instructions for updating the WLAN and Bluetooth drivers for various Intel wireless adapters including Intel Dual Band Wireless-AC 8260, 7265, 7260, and 7260 on Windows 10 devices. 2. It lists several precautions to take before updating such as being an administrator, being plugged in, disconnecting from networks, and closing unnecessary programs. 3. The process involves checking the current version, downloading and extracting update files, then running .bat files to update the WLAN driver first which may reset settings, followed by optionally updating the Bluetooth driver which requires uninstalling the old driver and re-pairing devices.

Uploaded by

Electroventica Electroventica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

FZ-G1[P/Q/R], FZ-M1ECF, FZ-M1F, FZ-Q2F, CF-54[D/E/F], CF-D1[N/Q],

FZ-G1[J/K/L], CF-31[1/2/3/4], CF-54[A/B/C],

CF-53[2/3/4/5/7], CF-C2C

(Windows 10)

Update Instructions for WLAN and Bluetooth driver

[Precaution]
Before updating the driver, you should
- Sign in as the administrator account.
- Connect AC Adaptor and fully charged battery.
- Disconnect networks (wired and wireless). (Except when you download the program.)
- Disconnect all peripheral equipment.
- Terminate all programs other than the program for updating Bluetooth driver.
- Terminate virus protection program and alike. (Restart them after finishing
updating.)

Updating Wireless LAN driver will reset the advanced properties of Wireless LAN
device in device manager to the factory default settings. (For example, 802.11a will
return to disabled.)
If the settings have been changed from factory default, please change them again after
updating the driver.

[Summary of installation procedure]


1. Update WLAN driver
1-1. Confirm the version of Wireless LAN driver
1-2. Download and extract the program for updating Wireless LAN driver
1-3. Update Wireless LAN driver
2. Update Bluetooth driver
2-1. Confirm the version of Bluetooth driver
2-2. Download and extract the program for updating Bluetooth driver
2-3. Delete Bluetooth devices
2-4. Update Bluetooth driver
2-4-1. Uninstall old Bluetooth driver
2-4-2. Install Bluetooth driver

KEEP THESE STEPS STRICTLY, OR MALFUNCTION MAY BE CAUSED.


[Procedure]
1. Update WLAN driver
1-1. Confirm the version of Wireless LAN driver
(1) Right click or touch and hold [Start] button to open the menu.
(2) Choose [Device Manager].
(3) Double click [Network adapters].
(4) Double click [Intel(R) Dual Band
Wireless-AC 8260] or [Intel(R) Dual Band Wireless-AC 7265] or [Intel(R) Dual
Band Wireless-AC 7260] or [Intel(R) Dual Band Wireless-N 7260].
(5) Select [Driver] tab, and check "Driver Version".
On the case of [Intel(R) Dual Band
Wireless-AC 8260], [Intel(R) Dual Band Wireless-AC 7265]
If the version of the driver is "19.40.0.3" or later, the driver has already been
updated. You don't need to execute the following steps.
If not, please execute the following steps.
On the case of [Intel(R) Dual Band Wireless-AC 7260], [Intel(R) Dual Band
Wireless-N 7260]
If the version of the driver is "18.33.5.1" or later, the driver has already been
updated. You don't need to execute the following steps.
If not, please execute the following steps.

1-2. Download and extract the program for updating Wireless LAN driver
(1) Download the program and execute it.
“wlan_v19.40.0_w10_fm.exe”
(2) Click [Yes] if "User Account Control" window is displayed.
(3) Read the "License Agreement", and click [Yes].
(4) Confirm the destination folder (default folder is
"c:\util2\drivers\wlan_v19_40_w10"), and click [OK].
(5) Wait until files are extracted. The folder in which update files are extracted will be
automatically opened on completion.

1-3. Update Wireless LAN driver


(1) Right click or touch and hold the following bat file and click [Run as administrator].
Pinstall_win10_fm.bat
(2) Click [Yes] if "User Account Control" window is displayed.
(3) Wait until "C:\windows\System32\cmd.exe" window disappears. It may take more
than several minutes until the window disappears.
[CAUTION]
Please do not click or touch "C:\windows\System32\cmd.exe" command prompt
window until it disappears automatically. If inside of the window is clicked or touched,
the command prompt will get into an edit mode, which suspends the bat execution.
If it gets into the edit mode, white cursor appears as in figure below. In this case,
please right click or touch and hold the inside of the window to get out of the edit mode.
Then bat execution will be resumed. Please wait until the window disappears
automatically.

(4) Restart the computer.


(5) Confirm the version of Wireless LAN driver with the same procedure as step1-1.
(6) Confirm the settings of Wireless LAN device and change them if needed.

If you don’t update WLAN driver, you don’t need to update Bluetooth driver.
2. Update Bluetooth driver
2-1. Confirm the version of Bluetooth driver
(1) Right click or touch and hold [Start] button to open the menu.
(2) Choose [Device Manager].
(3) Double Click [Bluetooth].
(4) Double Click [Intel(R) Wireless Bluetooth(R)].
(5) Select [Driver] tab, and check "Driver Version".
If the driver version is "19.40.1702.1059" or later, the driver has already been
updated. You don't need to execute the following steps.
If not, please execute the following steps.

2-2. Download and extract the program for updating Bluetooth driver
(1) Download the program named "bt_v19.40.0_w10.exe".
(2) Run the program named "bt_v19.40.0_w10.exe".
(3) Click [Yes] if "User Account Control" window is displayed.
(4) Read the license agreement and click [Yes].
(5) Confirm the destination folder (default folder is
"c:\util2\drivers\bt_v19.40.0_w10"), and click [OK].
(6) Wait until files are extracted. The folder in which update files are extracted will be
automatically opened on completion.

2-3. Delete Bluetooth devices


(1) Turn on Bluetooth.
(2) Click Bluetooth icon in Tasktray and click [Show Bluetooth Devices].
(3) If some devices are shown in the Bluetooth Devices , delete them except “Ready
to pair”.
(Click the device and select [Remove device].)

2-4. Update Bluetooth driver


After updating Bluetooth driver, you need to pair Bluetooth devices again.

2-4-1. Uninstall old Bluetooth driver


(1) Right click or touch and hold [Start] button to open the menu.
(2) Click [Programs and Features].
If [Program and Features] does not exist on the menu, click [Apps and Features]
instead and double click at the top of the window to maximize the window size.
Then, click [Programs and Features] at the upper right of the window.
(3) Uninstall ”Intel(R) Wireless Bluetooth(R)” .
(4) Click [Yes] if "User Account Control" window is displayed.
(5) Restart PC.

2-4-2. Update Bluetooth driver


(1) Right click or touch and hold the following bat file in the folder which is created as
step 2-2 and click [Run as administrator].
update_bt.bat
If you don’t select [Run as administrator], installation is failed in spite of
appearing message at step 3.
(2) Click [Yes] if "User Account Control" window is displayed.
(3) Wait until message “Now PC will be shut down to complete installation. Is it OK?
(y/n)” is appeared on "C:\windows\System32\cmd.exe".
(4) If the message is appeared, input [y],[enter].
(5) PC is shutdown.
(6) Turn on computer.
(7) Confirm the version of Bluetooth driver is "19.40.1702.1059", with the same
procedure as step 2-1.

You need to pair Bluetooth devices again.

You might also like