Scribd
Upload
21 views2 pages

Sheet No. 6

Uploaded by

samaa saad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views2 pages

Sheet No. 6

Uploaded by

samaa saad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Al-Mustansirya University Communication II

College of Engineering Tutorial Sheet No.6


Electrical Engineering Department 2008-2009

1. Design a monotone passband HP analogue filter having 3dB cutoff frequency


Of 100 rad/sec. and an attenuation of 15 dB at a frequency of 30 rad/sec.

2. Repeat (Q.9) with Chebyshev filter design and max. permissible ripple of 2dB.
Compare.

3. Design a HP digital filter (IIR) having monotone passband and cutoff freq.
Of -3dB and a stopband attenuation of -15dB at
a s = 1sec.

4. Design a LP (IIR) digital filter having 3dB cutoff freq.


of 1kHz and stop band attenuation of 28 dB at 2kHz . Use fs = 8kHz .

5. Design a LP digital filter having linear phase (FIR) with the same
requirements given in (Q.4). Find the attenuation fn. | H(w) | .

6. Design a bandpass (IIR) digital filter having the ch. Shown.

digital freq.

Ts = 1 sec.

7. Design a linear phase digital LPF having 3dB cutoff freq. of 1kHz and
Stopband attenuation of 40dB at 4kHz . Find the o/p y(n) for i/p
3
X(n) = 2sin(4 )t. Take fs = 8kHz.

1
8. Design a monotone HP digital IIR filter having 2dB cutoff at 100 rad/sec.
And stopband attenuation of 15dB at 30 rad/sec. Take fs = 75Hz.

9. Design and realize a linear phase digital HPF with 3dB cutoff at
200Hz. And stop band attenuation of at least 40dB at 50Hz. Find the filter
freq. response , its phase & gain constants at input freq. of 150Hz. Use
sampling freq. of 450Hz.

You might also like