Scribd
Upload
303 views

Injector Specification: Nozzle Holder Assembly NO. 33732 (35057)

This document provides specifications for a nozzle holder assembly used on Volkswagen engines. It includes: 1) Test standards and calibration details 2) A parts list and descriptions for 8 individual parts that make up the nozzle holder assembly 3) Application details listing the compatible injectors and nozzles for specific Volkswagen engine models 4) Technical specifications for the compatible injectors including opening pressure, valve lift, and hole configuration.

Uploaded by

johnny sabin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
303 views

Injector Specification: Nozzle Holder Assembly NO. 33732 (35057)

This document provides specifications for a nozzle holder assembly used on Volkswagen engines. It includes: 1) Test standards and calibration details 2) A parts list and descriptions for 8 individual parts that make up the nozzle holder assembly 3) Application details listing the compatible injectors and nozzles for specific Volkswagen engine models 4) Technical specifications for the compatible injectors including opening pressure, valve lift, and hole configuration.

Uploaded by

johnny sabin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Page 1 of 2

INJECTOR SPECIFICATION
NOZZLE HOLDER ASSEMBLY
EDITION: 5 NO. 33732 (35057)
APPLICATIONS : SEE PAGE 2 (OEM) (SERVICE)
DATED: 03-18-02 SUPERSEDES:
CUSTOMER: VOLKSWAGEN CUSTOMER PART NO. SEE PAGE 2

TEST STAND: ISO 8984 NOTE: Reference Conventional Injector


1. CALIBRATION FLUID: SAE J967 / ISO 4113 Service Manual 99118 for additional
(Ref. S.B. 201) AT ROOM TEMPERATURE (70Ε-80Ε F) service information.
2. CALIBRATING HIGH PRESSURE PIPES: 0.063 X 12"
(1.6 X 305 mm)

ITEM PART NO. QTY. DESCRIPTION


NO.

1 33733 1 BODY ASSEMBLY, *(1 PREFERRED


(35058) nozzle holder 2 MAX.)
PART THICKNESS
2 SEE * SHIM, pressure NO. mm (inches)
29305 1.000 (.0393)
TABLE adjusting 29306 1.050 (.0413)
29307 1.100 (.0433)
3 781720 1 SPRING, pressure 29308 1.150 (.0453)
adjusting 29309 1.200 (.0472)
29310 1.250 (.0492)
29311 1.300 (.0512)
4 29333 1 SEAT, spring
29312 1.350 (.0531)
29313 1.400 (.0551)
29314 1.450 (.0571)
29315 1.500 (.0591)
5 34667 1 PLATE ASSEMBLY, 29316 1.550 (.0610)
adapter 29317 1.600 (.0630)
29318 1.650 (.0650)
29319 1.700 (.0669)
29320 1.750 (.0688)
29321 1.800 (.0708)
29322 1.850 (.0728)
29323 1.900 (.0748)
6 PAGE 2 1 NOZZLE ASSEMBLY, 29324 1.950 (.0767)
29325 2.000 (.0787)
hole type
(not included in nozzle holder assembly)

7 33734 1 NUT, nozzle retaining


(torque to 50 - 60 Nm / 37 – 44.3 lbf.ft)

8 --- 1 WASHER, sealing (purchased separately)

FOR ENGINEERING USE ONLY


DATE ECN NO. EDITION
07-31-97 24123 1
04-29-99 25810 2
08-23-00 26983 3
11-10-00 26983 4
03-18-02 26983 5
Page 2 of 2

APPLICATION AND SERVICE INFORMATION


FOR HOLDER ASSEMBLY 33732 (35057)
(OEM) (SERVICE)

INJECTOR NOZZLE
STANADYNE CUSTOMER INSCRIPTION STANADYNE CUSTOMER INSCRIPTION
PART NO. PART NO. CODE PART NO. PART NO. CODE APPLICATION
TALKING CODE SHANK

33731 074 130 201L 33731 33735 074 130 211D 33735 2.5L 65KW
074 130 201L SDRSN150M33735 5 CYL. T4
(35056) (056)

OPENING PRESSURE
NEW AND SERVICE
INJECTOR Mpa (PSI) MAX VALVE LIFT NO. OF HOLES
NO. mm (inches) @ DIA. mm (inches)

33731 22.0 – 22.8 (3190 – 3306) 0.425 (.0167) 6 @ 0.164 (.00645)


(35056)

For bar, multiply Mpa by 10


Maximum valve lift for service : +0.05 mm beyound value shown in table.

35799P KIT FOR 2.5L 65KW 5CYL. T4 ENGINE


COMPOSED BY QTY
35056 INJECTOR ASSEMBLY 4
35059 INJECTOR ASSEMBLY BOI 1

You might also like