Scribd
Upload
644 views6 pages

ABAQUS Tutorial: Dr. Ahmed Elkady

The document provides an outline for an ABAQUS tutorial on modeling a steel beam-to-column subassembly connection. It describes modeling the geometry of parts, defining materials and cross-sections, assembling parts, specifying analysis steps and parameters, defining interactions and constraints, meshing, running the analysis, and visualizing results. It then gives an example of modeling an end-plate steel connection, showing the geometry, cross-sections, material properties defined with a bilinear hardening model, and the parts modeled with solid and shell elements.

Uploaded by

Husein
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
644 views6 pages

ABAQUS Tutorial: Dr. Ahmed Elkady

The document provides an outline for an ABAQUS tutorial on modeling a steel beam-to-column subassembly connection. It describes modeling the geometry of parts, defining materials and cross-sections, assembling parts, specifying analysis steps and parameters, defining interactions and constraints, meshing, running the analysis, and visualizing results. It then gives an example of modeling an end-plate steel connection, showing the geometry, cross-sections, material properties defined with a bilinear hardening model, and the parts modeled with solid and shell elements.

Uploaded by

Husein
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

ABAQUS Tutorial

Dr. Ahmed Elkady

ABAQUS Tutorial Slide 1


Tutorial Outline
 Modeling a Steel Beam-to-Column Subassembly
• Parts module (Defining geometry)

• Property module (Defining Materials and cross-sections)

• Assembly module (Parts assembly)

• Step module (Defining analysis steps type and parameters)

• Interaction module (Defining interactions & constraints)

• Mesh module (Defining mesh size and mesh element type)

• Job module (Running and monitoring the analysis)

• Visualization module (Visualizing displacements, strains and stresses)


ABAQUS Tutorial Slide 2
Example: End-plate steel connection
20 kN

50 mm
1.5 m

0.5 m

Fixed Base
Z X
ABAQUS Tutorial Slide 3
Example: End-plate steel connection
200
120 100
200

10 10 24

200 250 t=10


10
280
d=16
25
r=10
70
15
10
Column Beam End-Plate Bolt
(Solid elements) (Shell elements) (Solid elements) (Solid elements)

ABAQUS Tutorial Slide 4


Example: End-plate steel connection

d-tf
Extruded cross-
section

Modeled cross-section
dimension

Solid Part Shell Part


(sketch section outline) (sketch section centerline)

ABAQUS Tutorial Slide 5


Example: End-plate steel connection
Bilinear with a hardening branch

σ
S355 Steel fu
E = 200,000 MPa fy
ν = 0.3
fy = 355 MPa E
fu = 470 MPa
ɛu = 0.18
ɛy ɛu ε
ABAQUS Tutorial Slide 6

You might also like