Scribd
Upload
33 views

General Details Checklist Number Equipment Number Date Specifications

The document is a checklist for maintaining control valves at a facility. It includes sections for general details of the maintenance job, specifications of the control valve being maintained, tasks to be completed, and a checklist of half-yearly checks to perform on the control valves. The checklist is used to inspect the valves, check for leaks, verify functions, and ensure proper operation. Technicians and supervisors must sign off to confirm completed tasks.

Uploaded by

Prasant
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
33 views

General Details Checklist Number Equipment Number Date Specifications

The document is a checklist for maintaining control valves at a facility. It includes sections for general details of the maintenance job, specifications of the control valve being maintained, tasks to be completed, and a checklist of half-yearly checks to perform on the control valves. The checklist is used to inspect the valves, check for leaks, verify functions, and ensure proper operation. Technicians and supervisors must sign off to confirm completed tasks.

Uploaded by

Prasant
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

EPF - CHECKLIST DOC NO- Rev.

0
Control Valve
LOCAL
MAINTANANCE

GENERAL DETAILS

CHECKLIST NUMBER  
EQUIPMENT NUMBER  
DATE  

SPECIFICATIONS

Control Valve
MANUFACTURE  
MODEL NO.  
SERIAL NO.  

TASKS

MAINT. DONE
TASK DATE INITIAL
SCHED √
TOOLBOX TALK ALL      
Control valve inspection Half Yearly      
     

TASK COMPLETION REPORT


NOTE: PLEASE ATTACH ANY MANUFACTURERS MANUALS IF NECESSARY.

TASK COMPLETED YES NO SIGNATURE


TECHNICIAN
SUPERVISOR

HMGPP P a g e 1|2
EPF - CHECKLIST DOC NO- Rev. 0
Control Valve
LOCAL
MAINTANANCE

CHECKLIST FOR CONTROL VALVES

CHECKS TO DO DONE/VALUE INITIALS REMARKS


HALF YEARLY CHECKS OF CONTROL VALVES
Check for any leakage between the flange and tighten the bolts of
     
the flange if required.
Check the function of isolation valve and the drain valve..      

Check the supply voltage      

Check and tighten the connection of I/P convertors.      

Check for gland leakage.      

Check for proper air supply and any leakage      

Mode of action      

Check the function of the valve by controlling manually from DCS.      

Last Calibration date      

Range of pneumatic air supply of the actuator valve

Check the positioner for proper functionality

Date of the performed activities

HMGPP P a g e 2|2

You might also like