SK330-10/SK350LC-10

Power Meets Efficiency

1
 16% Increase in
Higher fuel saving productivity
means means
“Efficiency” “Power”

Compared to H-mode on the SK330-8

To urban centers and mines around the world.

Kobelco’s all-out innovation brings you durable earth-friendly
construction machinery suitable for any task and sites all over the
planet. With greater fuel economy we deliver higher efficiency to
any project.
Kobelco SK330 SK350LC machines are also more durable than
ever, able to withstand the rigors of the toughest job sites.
It all adds up to new levels of value that are a step ahead of the
times. While focusing on the global environment of the future,
Kobelco offers next-generation productivity to meet the need for
lower life cycle costs and exceed the expectations of customers
globally.

2
 Evolution Continues, with
Improved Fuel Efficiency.

In Pursuit of Improved Fuel Efficiency

Operation Mode
Fuel consumption is lower in H-mode/S-mode/ECO-mode in comparison with the previous model (Generation 8).

Compared to previous models Always and Forever. Compared to SK330-6 model (2006)
Yesterday, Today, and Tomorrow.

16%
ECO-mode (SK330-10)
Obsessed with Fuel Efficiency.
H-mode Over the past 10 years, Kobelco has achieved
37%
19%
an average reduction of about 37% in fuel
consumption. And we vow to continue to lead
S-mode in fuel efficiency.

ECO-mode 24% AIS (Auto Idle Stop)

Values are approximate improvement rate. If the safety lock lever is lifted up, the
Pull up safety lock lever
engine will stop automatically.
Engine deceleration This eliminates wasteful idling during
Engine rpm

standby, saving fuel and reducing CO2

Alarm
4 sec Engine emissions as well.
stops
55 sec

60 sec Elapsed
time

3
 16%
Higher fuel saving
means
“Efficiency”

The new arm interflow system more efficiently

controls hydraulic fluid flow, and significant
reduction of in-line resistance and pressure loss
boosts fuel efficiency by about 16%*.
The electronic-control common-rail engine
features high-pressure fuel injection and multiple
injection with improved precision.
* Compared to H-mode on the SK330-8

Hydraulic System: Revolutionary Technology Saves Fuel Pursuing maximum fuel efficiency
NEW
Arm Interflow System Common Rail
When lowering the System
boom, this system 2
High-pressure injection
uses the downward
atomizes the fuel, and
force generated by 3
more precise injection
the boom’s weight to 1
improves combustion
push fluid to the
4 efficiency. This also
shovel arm cylinder.
Boom weight contributes to better fuel
This greatly reduces
economy.
the need to apply The boom weight Hydraulic fluid is rechannel
Arm cylinder
power from outside 1 exerts force on 2 from the boom cylinder 3 contracts 4 Arm opens
the boom cylinder to the arm cylinder
the system.

Hydraulic Circuit Reduces Energy Loss

We have made every
effort to enhance fuel Improved hydraulic piping is an effective means of reducing pressure loss.
efficiency by
minimizing hydraulic
pressure resistance,
improving the
hydraulic line layout
to control friction
resistance loss and
minimizing valve
Larger hydraulic piping Smoother hydraulic piping Low-resistance connections
resistance.

4
 More Power and
Higher Efficiency.

The highly efficient hydraulic system Improved Fuel Efficiency Contributes to High Performance
minimizes fuel consumption while Superior Digging Performance
Powerful digging force delivers outstanding performance.
maximizing power. With nimble
Max. Bucket Digging Force Max. Arm Crowding Force
movement and superior digging power,
this excavator promises to improve
Normal: 222kN Normal: 163kN
With power boost: 244kN With power boost: 180kN
your job productivity. *Values are for STD arm (3.3m)

5
Get More Done Faster with Superior Operability

A Light Touch on the NEW

Lever Means Smoother,
Less Tiring Work
Top-class excavating It takes 38% less effort to work the
reach extends operation lever, which reduces fatigue
working range over long working hours or continued
Max. digging reach operations.

11,260mm
Max. digging depth

7,560mm
Max. vertical wall digging depth

6,610mm
*Values are for STD arm (3.3m)

Top Class Traveling Force

Powerful traveling force and drawbar pulling force deliver
plenty of speed when climbing slopes or negotiating bad
roads, and the agility to change direction swiftly and smoothly.

Drawbar Pulling Force: 333kN

Operator-friendly Features Include Controls that Are Easy to See, Easy to Use

Multi-Display in Color
Brilliant colors and graphic displays are easy to
recognize on the LCD multi-display in the console.
1 The display shows fuel consumption, maintenance
intervals, and more.

2 1 Analog gauge provides an intuitive reading of Fuel consumption Maintenance

fuel level and engine water temperature
2 Green indicator light shows low fuel
consumption during operation
3 Fuel consumption/Switch indicator for rear
3 camera images
4 Digging mode switch
5 Monitor display switch

Breaker mode Nibbler mode Rearview monitoring (Option)

One-Touch Attachment
Mode Switch
A simple touch of a button, switches the hydraulic
circuit and flow amount to match attachment
changes. Icons help the operator to confirm the
4 5 proper configuration at a glance. 
6
 Increased Power,
with Enhanced Durability
to Maintain the
Machine's Value

2 Built to Operate in Tough Working Environments

The attachment has been reinforced to handle a higher work volume, with greater power and excellent durability that can
withstand demanding work conditions.

NEW

1 Enlarged Reinforcement
of the Arm Foot
HD: Base plate thickness has been
increased.

Current New

NEW

2 Modified Foot Boss

Shape
The arm foot boss shape has been
modified and improved to distribute
stress, delivering more strength for
tasks like digging next to a wall.
Current New

7
 Increase in
productivity
means
“Power”

Structural design increases strength,

while eliminating hydraulic problems.
Enhanced durability takes
productivity to a new level.

Improved Filtration System Reliability

Clean, contaminant-free fuel and hydraulic fluid are essential to stable performance. The improved filtration systems reduce
the risk of mechanical trouble and enhance longevity and durability.
NEW
NEW
Hydraulic Fluid Filter Hydraulic Fluid Filter Clog Detector Pressure Pressure
Recognized as the best in the Hydraulic tank pressure sensor monitors the pressure detection system detection system
industry, our Premium-fine filter difference between the return line and tank inside pressure
separates out even the smallest to determine the degree of clogging. If the difference
particles. New cover prevents exceeds a predetermined level, a warning appears on the
contamination when changing filters. multi-display, so any contamination can be trapped by the
Hydraulic fluid filter Hydraulic fluid reservoir
filter and replaced before it reaches the hydraulic fluid in
the tank.

Metal Mesh Cover NEW Fuel Filter

Air Cleaner The pre-filter with built-in water New Return Larger-size
separator has 1.8 times more filter
Metal mesh cover ensures strength
area compared to the previous
and durability.
models and with a new final stage
maintenance free fuel filter to Engine Final filter
maximize filtering performance. Main filter
Pre-filter Fuel tank

8
 Comfortable Cab Is
Now Safer than Ever.

Comfort
A work environment that is quieter
and more comfortable. A cab that Super-Airtight Cab
puts the operator first is key to
improved safety.

The high level of air-tightness keeps

dust out of the cab.

Quiet Inside
The high level of air-tightness ensures a
quiet, comfortable cabin interior.

Low Vibration
Coil springs absorb small vibrations, and
high suspension mounts filled with
silicone oil reduce heavy vibration. The
long stroke achieved by this system
provides excellent protection from
vibration.

Twice the stroke of a conventional mount

Coil spring
Silicone oil

Broad View Liberates

the Operator
The front window features one large
piece of glass without a center pillar on
the right side for a wide, unobstructed
view.

9
Air Conditioner Louvers More Comfortable Seat Means Higher Productivity
behind the Seat NEW

The large air-conditioner has louvers on the

back pillars that blow from behind and to
the right and left of the operator’s seat.
They can be adjusted to put a direct flow of
cool/warm air on the operator, which means
a more comfortable operating environment. Seat recliner can be pushed back flat Double slides allow adjustment for optimum comfort

Large Cab Is Easy to Interior Equipment Adds to Comfort and

Get in and Out of Convenience
The expanded cab provides plenty of
room for a large door, more headroom
and smoother entry and exit.

Spacious storage tray Large cup holder

Safety

ROPS Cab Expanded Field of View for Greater Safety

ROPS (Roll-Over-Protective Structure)-compliant cab
clears ISO standards (ISO-12117-2: 2008) and
ensures greater safety for the operator should the
machine tip over.

Rearview mirrors left and right Hammer for emergency exit

Greater safety assured by rearview mirrors

on left and right.

Rear view camera (option)

A rear view camera is installed as option to simplify checking for safety

behind the machine. The picture appears on the color monitor.
10
 GPS

Base station

Hydraulic excavator

Web server

KOBELCO service personnel/dealer/customer

Customer KOBELCO office KOBELCO service personnel Remote Monitoring for Peace of Mind
KOMEXS uses satellite communication and internet to relay
data, and therefore can be deployed in areas where other
forms of communication are difficult.
When a hydraulic excavator is fitted with this system, data on the
machine’ s operation, such as operating hours, location, fuel
consumption, and maintenance status can be obtained remotely.

Direct Access to Operational Status

Location Data
•Accurate location data can be obtained even from sites where communications are difficult.

Latest location Location records Work data

11
Operating Hours Fuel Consumption Data Graph of Work Content
•A comparison of operating times of machines at •Data on fuel consumption and idling times can be •The graph shows how working hours are divided
multiple locations shows which locations are busier and used to indicate improvements in fuel consumption. among different operating categories, including
more profitable. digging, idling, traveling and optional operations.
•Operating hours on site can be accurately recorded,
for running time calculations needed for rental
machines, etc.

Digging Hrs Trveling Hrs Idle Hrs

Opt Att Hrs Cane Mode Hrs Ave,Fuel Consumption

Daily report Fuel consumption Work status

Maintenance Data and Warning Alerts

Machine Maintenance Warning Alerts

Data •This system warns an alert if an anomaly is sensed,
•Provides maintenance status of separate preventing damage that could result in machine
machines operating at multiple sites. downtime.
•Maintenance data is also relayed to
KOBELCO service personnel, for more
efficient planning of periodic servicing.

Maintenance

Alarm Information Can Be Daily/Monthly Reports

Received through E-mail •Operational data downloaded onto a computer helps
•Alarm information or maintenance notice can be in formulating daily and monthly reports.
received through E-mail, using a computer or cell
phone.

Messages displayed when the

machine returns to the set area.

Security System
Engine Start Area Alarm
Alarm •It can be set an alarm if
•The system can be set an the machine is moved out
alarm if the machine is of its designated area to
operated outside another location.
designated time.

Engine start alarm outside prescribed work time Alarm for outside of reset area
12
 NEW
Easy, On-the-Spot Maintenance
There is ample space in the engine compartment for a mechanic to do maintenance work inside. The distance between steps is lower so entry and exit is easier. And the
mechanic can work in comfort, without contortions or unnatural body positions. Finally, the hood is lighter and easier to raise and lower.

Generous space for maintenance work Step/Hand rail Double-element air cleaner

Maintenance Work, Daily Checks, Etc., Can Be Done from Ground Level
The layout allows for easy access from the ground for many daily checks and regular maintenance tasks.

1 2

Fuel filter with

built-in water-separator Fuel filter Right side Left side

1 Fuel filter Simple layout for easy access to radiator

2 Fuel filter with built-in water-separator and cooling system elements.
3 Engine oil filter
13
 Efficient Maintenance Keeps the Machine
in Peak Operating Condition.

Machine Information
Display Function
Examples of displaying maintenance information
Displays only the maintenance information that’s needed, when it’s needed

Self-diagnostic function provides early-warning detection and display of electrical system malfunctions

Service-diagnostic function makes it easier to check the status of the machine

Record function of previous breakdowns including irregular and transient malfunction

More Efficient Maintenance Inside the Cab

Internal and external air conditioner filters
can be easily removed without tools for
cleaning.

Air conditioner filters

Easy Cleaning

Crawler frame Detachable two-piece floor mat Engine oil pan

Special crawler frame design for easy mud removal cleaning. Detachable two-piece floor mat with Engine oil pan equipped with drain valve.
handles for easy removal. A floor drain is
located under floor mat.

Long-life
Long-Interval Maintenance Replacement
Highly Durable Premium-fine
hydraulic oil: Long-life hydraulic oil reduces cost and labor. cycle: Filter
2,000 1,000 The high-capacity hydraulic oil filter incorporates glass
hours hours fiber with superior cleaning power and durability.

14
 Specifications

Engine Travel System

Model HINO J08EUN Travel motors Variable displacement piston pump
Four-stroke liquid-cooled direct injection diesel Travel brakes Hydraulic
Type
turbo charged with intercooler Parking brakes Wet multiple plate
No. of cylinders 6 SK330 45 each side
Travel shoes
Bore and stroke 112 mm X 130 mm SK350LC 48 each side
Displacement 7.684 L ravel speed 5.6/3.3 km/h
188 kW/2,100 min-1 (ISO 9249) Drawbar pulling force 333 kN (ISO 7464)
Rated power output
200 kW/2,100 min-1 (ISO 14396) Gradeability 70 % {35°}
969 N•m/1,600 min-1 (ISO 9249)
Max. torque
998 N•m/1,600 min-1 (ISO 14396)

Cab & Control

Hydraulic System Cab
All-weather, sound-suppressed steel cab mounted on the high suspension
Pump mounts filled with silicone oil and equipped with a heavy, insulated floor mat.
Two variable displacement piston pumps + Control
Type
one gear pump Two hand levers and two foot pedals for travel
Max. discharge flow 2 x 294 L/min, 1 x 21 L/min Two hand levers for excavating and swing
Relief valve setting Electric rotary-type engine throttle
Boom, arm and bucket 34.3 MPa {350 kgf/cm2}
Power Boost 37.8 MPa {385 kgf/cm2}
Travel circuit 34.3 MPa {350 kgf/cm2}
Swing circuit 29.0 MPa {296 kgf/cm2} Boom, Arm & Bucket
Control circuit 5.0 MPa {50 kgf/cm2}
Pilot control pump Gear type Boom cylinders 140 mm x 1,550 mm
Main control valves 8-spool Arm cylinder 170 mm x 1,788 mm
Oil cooler Air cooled type Bucket cylinder 150 mm x 1,193 mm

Swing System Refilling Capacities & Lubrications

Swing motor Axial-piston motor Fuel tank 503 L
Hydraulic; locking automatically when the swing Cooling system 35 L
Brake
control lever is in neutral position Engine oil 28.5 L
Parking brake Wet multiple plate Travel reduction gear 2 x 8.0 L
Swing speed 10 min-1 {rpm} Swing reduction gear 7L
Tail swing radius 3,600 mm 245 L tank oil level
Hydraulic oil tank
Min. front swing radius 4,310 mm 410 L hydraulic system

Attachments
Backhoe bucket and arm combination

Backhoe bucket
Use
Normal digging
ISO heaped m3 1.4 1.6
Bucket capacity
ISO Struck m3 1.0 1.2
With side cutters mm 1,420 1,600
Opening width
Without side cutters mm 1,300 1,470
No. of bucket teeth 5 5
Bucket weight kg 1,190 1,290
2.25 m super short arm
Combinations 2.60 m short arm
3.30 m standard arm
Standard Recommend

15
 SK330-10 SK350LC-10

Working Ranges a
b
Unit: m
h
Boom 6.50m 12 m
Arm Super short Short Standard 11
Range 2.25 m 2.6 m 3.3 m 10
a- Max. digging reach 10.36 10.61 11.26 9
b- Max. digging reach at ground level 10.15 10.4 11.06 8

c- Max. digging depth 6.51 6.86 7.56 7

d- Max. digging height 10.29 10.26 10.58 6

5
e- Max. dumping clearance 7.06 7.06 7.37 d
4
f- Min. dumping clearance 3.73 3.32 2.62 e
3
g- Max. vertical wall digging depth 4.33 5.84 6.61
2
h- Min. swing radius 4.49 4.46 4.31 f 1
i- Horizontal digging stroke at ground level 3.39 4.21 5.82
0
j- Digging depth for 2.4 m (8') flat bottom 6.31 6.67 7.4
1
Bucket capacity ISO heaped m3 1.6 1.4 1.4
2
3
Digging Force (ISO 6015) Unit: kN j
g i
c 4
Super short Short Standard 5
Arm length
2.25 m 2.6 m 3.3 m
6
220 222 222 7
Bucket digging force
242* 244* 244* 8
232 205 163 9m
Arm crowding force 13 12 11 10 9 8 7 6 5 4 3 2 1m
255* 225* 180*
*Power Boost engaged. Standard Arm Short Arm Super Short Arm

Dimensions
Unit: mm
Super short Short Standard G' Distance from center of swing to rear end 3,600
Arm length
2.25 m 2.6 m 3.3 m SK330 3,720
H Tumbler distance
A Overall length 11,510 11,380 11,300 SK350LC 4,050
B Overall height (to top of boom) 3,760 3,690 3,430 SK330 4,650
I Overall length of crawler
C Overall width 3,190 SK350LC 4,960
D Overall height (to top of cab) 3,150 J Track gauge 2,590
E Ground clearance of rear end* 1,200 K Shoe width 600
F Ground clearance* 500 L Overall width of upperstructure 2,980
G Tail swing radius 3,600 *Without including height of shoe

A
L
G,G’

B
D

E
F

H K J
I C

Operating Weight & Ground Pressure

In standard trim, with standard boom, 3.3 m arm, and 1.4 m3 ISO heaped bucket
Shaped Triple grouser shoes (even height)
Shoe width mm 600 700 800
Overall width mm 3,190 3,290 3,390
SK330 70 61 54
Ground pressure kPa
SK350LC 66 58 51
SK330 34,700 35,500 35,900
Operating weight kg
SK350LC 35,400 36,200 36,600

16
 Lifting Capacities

A: Reach from swing centerline to arm top

Rating over front
B: Arm top height above/below ground
C: Lifting capacities in Kilograms
Rating over side or 360 degrees Bucket: Without bucket
Relief valve setting: 34.3 MPa (350 kgf/cm2)

SK330 Super Short Arm: 2.25 m Bucket: Without Shoe: 800 mm Counterweight: 7,890 kg
A 3.0 m 4.5 m 6.0 m 7.5 m At Max. Reach

Radius
B
7.5 m kg *8,450 *8,450 *8,400 *8,400 6.73 m
6.0 m kg *8,800 *8,800 *8,090 7,280 *8,080 6,920 7.71 m
4.5 m kg *9,720 *9,720 *8,350 7,070 *8,000 6,000 8.31 m
3.0 m kg *10,800 9,230 *8,830 6,780 7,800 5,540 8.61 m
1.5 m kg *11,590 8,770 *9,230 6,520 7,630 5,390 8.64 m
G.L. kg *11,810 8,540 9,150 6,380 7,870 5,540 8.40 m
-1.5 m kg *14,640 12,950 *11,370 8,520 *8,890 6,390 *8,260 6,050 7.87 m
-3.0 m kg *15,420 *15,420 *12,790 *12,790 *10,010 8,720 *8,110 7,220 6.98 m
-4.5 m kg *9,290 *9,290 *7,170 *7,170 5.56 m

SK330 Short Arm: 2.60 m Bucket: Without Shoe: 800 mm Counterweight: 7,890 kg
A 3.0 m 4.5 m 6.0 m 7.5 m At Max. Reach

Radius
B
7.5 m kg *7,790 *7,790 7.06 m
6.0 m kg *8,330 *8,330 *7,630 7,300 *7,570 6,520 8.00 m
4.5 m kg *11,970 *11,970 *9,290 *9,290 *7,990 7,060 *7,530 5,680 8.58 m
3.0 m kg *10,420 9,260 *8,530 6,750 7,410 5,250 8.87 m
1.5 m kg *11,320 8,750 *9,010 6,470 7,240 5,100 8.89 m
G.L. kg *15,750 12,710 *11,680 8,470 9,070 6,290 7,440 5,210 8.66 m
-1.5 m kg *14,930 12,760 *11,410 8,400 *8,960 6,250 *8,000 5,650 8.15 m
-3.0 m kg *16,830 *16,830 *13,300 13,000 *10,320 8,540 *8,000 6,650 7.29 m
-4.5 m kg *12,690 *12,690 *10,270 *10,270 *7,500 *7,500 5.95 m

SK330 Standard Arm: 3.30 m Bucket: Without Shoe: 600 mm Counterweight: 7,890 kg
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach

Radius
B
9.0 m kg *5,750 *5,750 6.56 m
7.5 m kg *6,910 *6,910 *5,260 *5,260 7.86 m
6.0 m kg *7,010 *7,010 *5,080 *5,080 8.71 m
4.5 m kg *8,610 *8,610 *7,490 7,050 *6,910 5,220 *5,080 4,970 9.25 m
3.0 m kg *13,360 *13,360 *9,860 9,290 *8,140 6,700 7,120 5,070 *5,250 4,620 9.52 m
1.5 m kg *15,280 12,950 *10,960 8,700 *8,750 6,380 6,950 4,900 *5,580 4,490 9.54 m
G.L. kg *15,930 12,470 *11,600 8,320 8,840 6,150 6,820 4,790 *6,150 4,560 9.33 m
-1.5 m kg *13,950 *13,950 *15,590 12,370 *11,640 8,160 8,720 6,040 6,950 4,870 8.85 m
-3.0 m kg *15,880 *15,880 *19,570 *19,570 *14,400 12,500 *10,970 8,200 *8,490 6,080 *7,560 5,560 8.07 m
-4.5 m kg *15,910 *15,910 *12,080 *12,080 *9,170 8,460 *7,450 7,080 6.88 m

SK330 Standard Arm: 3.30 m Bucket: Without Shoe: 800 mm Counterweight: 7,890 kg
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach

Radius
B
9.0 m kg *5,750 *5,750 6.56 m
7.5 m kg *6,910 *6,910 *5,260 *5,260 7.86 m
6.0 m kg *7,010 *7,010 *5,080 *5,080 8.71 m
4.5 m kg *8,610 *8,610 *7,490 7,240 *6,910 5,380 *5,080 *5,080 9.25 m
3.0 m kg *13,360 *13,360 *9,860 9,550 *8,140 6,900 *7,170 5,230 *5,250 4,770 9.52 m
1.5 m kg *15,280 13,340 *10,960 8,960 *8,750 6,580 7,180 5,060 *5,580 4,640 9.54 m
G.L. kg *15,930 12,860 *11,600 8,590 9,130 6,340 7,050 4,950 *6,150 4,710 9.33 m
-1.5 m kg *13,950 *13,950 *15,590 12,760 *11,640 8,430 9,010 6,230 *7,100 5,030 8.85 m
-3.0 m kg *15,880 *15,880 *19,570 *19,570 *14,400 12,890 *10,970 8,460 *8,490 6,280 *7,560 5,740 8.07 m
-4.5 m kg *15,910 *15,910 *12,080 *12,080 *9,170 8,720 *7,450 7,300 6.88 m

Notes:
1. Do not attempt to lift or hold any load that is greater than these lifting capacities at their 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of
specified lift point radius and heights. Weight of all accessories must be deducted from the above hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are
lifting capacities. limited by hydraulic capacity rather than tipping load.
2. Lifting capacities are based on machine standing on level, firm, and uniform ground. User must 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before
make allowance for job conditions such as soft or uneven ground, out of level conditions, side operating this machine. Rules for safe operation of equipment should be adhered to at all times.
loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 6. Lifting capacities apply to only machine as originally manufactured and normally equipped by
3. Arm top pin is defined as lift point. KOBELCO CONSTRUCTION MACHINERY CO., LTD.

17
 SK330-10 SK350LC-10

SK350LC Super Short Arm: 2.25 m Bucket: Without Shoe: 800 mm Counterweight: 7,890 kg
A 3.0 m 4.5 m 6.0 m 7.5 m At Max. Reach

Radius
B
7.5 m kg *8,450 *8,450 *8,400 *8,400 6.73 m
6.0 m kg *8,800 *8,800 *8,090 7,410 *8,080 7,040 7.71 m
4.5 m kg *9,720 *9,720 *8,350 7,200 *8,000 6,110 8.31 m
3.0 m kg *10,800 9,390 *8,830 6,910 *8,020 5,650 8.61 m
1.5 m kg *11,590 8,930 *9,230 6,650 *8,110 5,500 8.64 m
G.L. kg *11,810 8,710 *9,350 6,500 *8,210 5,650 8.40 m
-1.5 m kg *14,640 13,200 *11,370 8,690 *8,890 6,520 *8,260 6,160 7.87 m
-3.0 m kg *15.420 *15.420 *12,790 *12,790 *10,010 8,880 *8,110 7,360 6.98 m
-4.5 m kg *9,290 *9,290 *7,170 *7,170 5.56 m

SK350LC Short Arm: 2.60 m Bucket: Without Shoe: 800 mm Counterweight: 7,890 kg
A 3.0 m 4.5 m 6.0 m 7.5 m At Max. Reach

Radius
B
7.5 m kg *7,790 *7,790 7.06 m
6.0 m kg *8,330 *8,330 *7,630 7,430 *7,570 6,640 8.00 m
4.5 m kg *11,970 *11,970 *9,290 *9,290 *7,990 7,190 *7,530 5,790 8.58 m
3.0 m kg *10,420 9,420 *8,530 6,880 *7,590 5,350 8.87 m
1.5 m kg *11,320 8,910 *9,010 6,590 *7,710 5,200 8.89 m
G.L. kg *15,750 12,960 *11,680 8,630 *9,220 6,410 *7,870 5,320 8.66 m
-1.5 m kg *14,930 13,010 *11,410 8,570 *8,960 6,380 *8,000 5,760 8.15 m
-3.0 m kg *16,830 *16,830 *13,300 13,250 *10,320 8,710 *8,000 6,780 7.29 m
-4.5 m kg *12,690 *12,690 *10,270 *10,270 *7,500 *7,500 5.95 m

SK350LC Standard Arm: 3.30 m Bucket: Without Shoe: 600 mm Counterweight: 7,890 kg
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach

Radius
B
9.0 m kg *5,750 *5,750 6.56 m
7.5 m kg *6,910 *6,910 *5,260 *5,260 7.86 m
6.0 m kg *7,010 *7,010 *5,080 *5,080 8.71 m
4.5 m kg *8,610 *8,610 *7,490 7,160 *6,910 5,310 *5,080 5,060 9.25 m
3.0 m kg *13,360 *13,360 *9,860 9,440 *8,140 6,820 *7,170 5,160 *5,250 4,700 9.52 m
1.5 m kg *15,280 13,170 *10,960 8,850 *8,750 6,490 *7,450 4,990 *5,580 4,570 9.54 m
G.L. kg *15,930 12,690 *11,600 8,470 *9,150 6,260 *7,570 4,880 *6,150 4,640 9.33 m
-1.5 m kg *13,950 *13,950 *15,590 12,590 *11,640 8,310 *9,150 6,150 *7,100 4,960 8.85 m
-3.0 m kg *15,880 *15,880 *19,570 *19,570 *14,400 12,720 *10,970 8,350 *8,490 6,200 *7,560 5,660 8.07 m
-4.5 m kg *15,910 *15,910 *12,080 *12,080 *9,170 8,610 *7,450 7,210 6.88 m

SK350LC Standard Arm: 3.30 m Bucket: Without Shoe: 800 mm Counterweight: 7,890 kg
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach

Radius
B
9.0 m kg *5,750 *5,750 6.56 m
7.5 m kg *6,910 *6,910 *5,260 *5,260 7.86 m
6.0 m kg *7,010 *7,010 *5,080 *5,080 8.71 m
4.5 m kg *8,610 *8,610 *7,490 7,370 *6,910 5,480 *5,080 *5,080 9.25 m
3.0 m kg *13,360 *13,360 *9,860 9,720 *8,140 7,030 *7,170 5,330 *5,250 4,860 9.52 m
1.5 m kg *15,280 13,590 *10,960 9,130 *8,750 6,710 *7,450 5,160 *5,580 4,730 9.54 m
G.L. kg *15,930 13,110 *11,600 8,750 *9,150 6,470 *7,570 5,050 *6,150 4,810 9.33 m
-1.5 m kg *13,950 *13,950 *15,590 13,000 *11,640 8,590 *9,150 6,360 *7,100 5,130 8.85 m
-3.0 m kg *15,880 *15,880 *19,570 *19,570 *14,400 13,140 *10,970 8,630 *8,490 6,410 *7,560 5,860 8.07 m
-4.5 m kg *15,910 *15,910 *12,080 *12,080 *9,170 8,890 *7,450 7,440 6.88 m

18
 SK330-10 SK350LC-10

STANDARD EQUIPMENT
ENGINE CAB & CONTROL
■ Engine, HINO J08EUN, diesel engine with turbocharger and intercooler ■ Two control levers, pilot-operated
■ Automatic engine deceleration ■ Horn, electric
■ Auto Idle Stop (AIS) ■ Cab light (interior)
■ Batteries (2 x 12V - 96Ah) ■ Luggage tray
■ Starting motor (24V - 5 kW), 60 amp alternator ■ Large cup holder
■ Automatic engine shut-down ■ Detachable two-piece floor mat
■ Engine oil pan drain cock ■ Headrest
■ Double element air cleaner ■ Handrails
CONTROL ■ Intermittent windshield wiper with double-spray washer
■ Working mode selector (H-mode, S-mode and ECO-mode) ■ Skylight
■ Power Boost ■ Tinted safety glass
SWING SYSTEM & TRAVEL SYSTEM ■ Pull-up type front window and removable lower front window
■ Swing rebound prevention system ■ Easy-to-read multi-display color monitor
■ Straight propel system ■ Automatic air conditioner
■ Two-speed travel with automatic shift down ■ Emergency escape hammer
■ Sealed & lubricated track links ■ KOMEXS
■ Grease-type track adjusters ■ Suspension seat
■ Automatic swing brake
■ Tow eyes
HYDRAULIC
■ Boom regeneration system
■ Auto warm up system
■ Aluminum hydraulic oil cooler
■ Arm interflow system
■ Hydraulic fluid filter clog detector
MIRRORS & LIGHTS
■ Two rear view mirrors
■ Five front working lights (Two for boom, one for boom cylinder,
one for right storage box and one for cab)

OPTIONAL EQUIPMENT
■ Additional track guide ■ Rear view camera
■ N & B piping ■ Cab guard
■ Refilling pump ■ Two cab lights

Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for specifics.

Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines
with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require.
Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.

Inquiries To:
5-15, Kitashinagawa 5-chome, Shinagawa-ku, Tokyo 141-8626 JAPAN
Tel: +81 (0) 3-5789-2146 Fax: +81 (0) 3-5789-2135
https://www.kobelcocm-global.com/

SK330/SK350LC-10-SEASIA-D(SRI)-101-170301EF