Auto Provision Configuration files

Version Summary of Changes Date

1.Add the following paramters:

network.ip_address_mode
network.ipv6_static_dns_enable
network.ipv6_prefix
network.ipv6_internet_port.type
V80.15 network.ipv6_internet_port.ip Jul. 2016
network.ipv6_internet_port.gateway
network.ipv6_primary_dns
network.ipv6_secondary_dns
account.X.hide_local_number.enable
features.dtmf.volume
1.voice.rtcp.enable
Add released W52H handset.
2.voice.rtcp_cname
Add the following paramters, and add the Static Settings
and Compatible Parameters sheets:
voice.rtcp_intval
V81.10 lcl.datetime.date.format Jan. 2017
voice.rtcp_xr.enable
account.X.xsi.custom_url
phone_setting.rtcp_xr_report.enable
account.X.outbound_proxy.Y.address
phone_setting.vq_rtcpxr.session_report.enable
account.X.outbound_proxy.Y.port
phone_setting.vq_rtcpxr.states_show_on_web.enable
account.X.reg_failed_retry_min_time
phone_setting.vq_rtcpxr.interval_report.enable
account.X.reg_failed_retry_max_time
phone_setting.vq_rtcpxr_interval_period
account.X.sip_server.Y.invite_retry_counts
phone_setting.vq_rtcpxr_moslq_threshold_warning
bw.xsi.call_log.enable
phone_setting.vq_rtcpxr_moslq_threshold_critical
features.call_park.park_mode
phone_setting.vq_rtcpxr_delay_threshold_warning
features.call_park.enable
phone_setting.vq_rtcpxr_delay_threshold_critical
features.call_park.park_code
account.x.vq_rtcpxr.collector_server_host
features.call_park.park_retrieve_code
account.x.vq_rtcpxr.collector_name
account.X.codec.<payload_type>.enable
account.x.vq_rtcpxr.collector_server_port
account.X.codec.<payload_type>.priority
web_setting.picture.url
account.X.codec.<payload_type>.rtpmap
web_setting.picture.delete
static.network.qos.rtptos
web_setting.color.url
static.network.qos.signaltos
web_setting.logo_link
network.static_nat.enable
web_setting.title
network.static_nat.addr
web_setting.model_name
sip.nat_turn.enable
wui.quick_login
sip.nat_turn.server
2.Update the following parameters:
sip.nat_turn.port
network.pppoe.user
sip.nat_turn.username
network.pppoe.password
sip.nat_turn.password
security.trust_certificates
ice.enable
network.internet_port.type
static.network.802_1x.eap_fast_provision_mode
network.internet_port.ip
static.network.802_1x.anonymous_identity
network.internet_port.mask
static.syslog.server
network.internet_port.gateway
static.local_log.enable
network.primary_dns
static.local_log.level
network.secondary_dns
static.local_log.max_file_size
features.caller_name_type_on_dialing
static.syslog.enable
custom.handset.language
static.syslog.server_port
static.syslog.level
static.syslog.transport_type
static.syslog.prepend_mac_address.enable
static.syslog.facility
static.auto_provision.local_log.backup.enable
static.auto_provision.local_log.backup.path
NO.

2
 Description

If you want to reset the configuration of a parameter, set the value of the parameter to !NULL! or %NULL%.
For example, local_time.ntp_server1 = %NULL%. After the auto provisioning process is completed, the NTP server 1 will be reset to “cn.pool.ntp.org
If the value of the parameter “overwrite_mode” is set to 1 (Enabled) in the boot file, you can reset the configuration of a parameter by leaving the
blank or deleting the parameter.
For example, local_time.ntp_server1 = , local_time.ntp_server1 = "" or delete the parameter. After the auto provisioning process is completed, the N
“cn.pool.ntp.org”.
 Description of Configuration Parameters

Y: All handsets support Y(): Only handset in bracket support

The name of the Common CFG file for base station is y000000000025.cfg
The name of handset is W56H and W52H

Function Parameter W52H/W56H Permitted Value

IP Mode static.network.ip_address_mode Y 0, 1 or 2

static.network.internet_port.type Y 0 or 2

static.network.internet_port.ip Y IPv4 address

static.network.internet_port.mask Y Subnet Mask

IPv4

static.network.internet_port.gateway Y IPv4 address

static.network.primary_dns Y IPv4 address

static.network.secondary_dns Y IPv4 address

static.network.ipv6_static_dns_enable Y 0 or 1

static.network.ipv6_prefix Y Integer from 0 to 128

static.network.ipv6_internet_port.type Y 0 or 1

IPv6 static.network.ipv6_internet_port.ip Y IPv6 address

static.network.ipv6_internet_port.gateway Y IPv6 address

 static.network.ipv6_primary_dns Y IPv6 address

static.network.ipv6_secondary_dns Y IPv6 address

String within 32
account.X.vq_rtcpxr.collector_name Y
characters

VQ-RTCPXR
account.X.vq_rtcpxr.collector_server_host Y IPv4 Address
( X ranges from 1 to 5.)

Integer from 1 to
account.X.vq_rtcpxr.collector_server_port Y
65535

local_time.time_zone Y -11 to +14

String within 32
local_time.time_zone_name Y
characters

IP address or domain
local_time.ntp_server1 Y
name

IP address or domain
local_time.ntp_server2 Y
name

Integer from 15 to
local_time.interval Y
86400

local_time.summer_time Y 0, 1 or 2

local_time.dst_time_type Y 0 or 1

Time local_time.start_time Y Time

local_time.end_time Y Time

Integer from -300 to

local_time.offset_time Y
300

local_time.dhcp_time Y 0 or 1
 lcl.datetime.date.format Y String

URL within 511

auto_dst.url Y
characters

local_time.manual_time_enable Y 0 or 1

local_time.manual_ntp_srv_prior Y 0 or 1

account.X.enable Y 0 or 1

String within 99
account.X.label Y
characters

String within 99
account.X.display_name Y
characters

String within 99
account.X.auth_name Y
characters

Register Basic
String within 99
( X ranges from 1 to 5, Y ranges account.X.user_name Y
characters
from 1 to 2.)

String within 99
account.X.password Y
characters

account.X.outbound_proxy_enable Y 0 or 1

V81 alpha:
account.X.backup_o
utbound_host IP address or domain
account.X.outbound_proxy.Y.address Y
name
V81 alpha:
account.X.backup_o
utbound_port Integer from 0 to
account.X.outbound_proxy.Y.port Y
65535

account.X.sip_server_type Y 0, 2, 8 or 10

account.X.unregister_on_reboot Y 0 or 1

String within 256

account.X.proxy_require Y
characters

Register Advanced
( X ranges from 1 to 5.)
 account.X.register_mac Y 0 or 1

Register Advanced
( X ranges from 1 to 5.)
account.X.register_line Y 0 or 1

Integer from 0 to
account.X.reg_fail_retry_interval Y
1800

V81 sp2:
-----支持,Telstra Integer greater than
account.X.reg_failed_retry_min_time Y
客户的技术支持 or equal to 0

V81 sp2:
-----支持,Telstra Integer greater than
account.X.reg_failed_retry_max_time Y
客户的技术支持 or equal to 0

account.X.nat.nat_traversal Y 0, 1 or 2

account.X.nat.udp_update_enable Y 0, 1, 2 or 3
NAT
( X ranges from 1 to 5.)

Integer from 15 to
account.X.nat.udp_update_time Y
2147483647

account.X.nat.rport Y 0, 1 or 2

Voice Mail Number String within 99

voice_mail.number.X Y
( X ranges from 1 to 5.) characters

features.provision_anonymous_call_on_gui.e
Y 0 or 1
nable

account.X.anonymous_call Y 0 or 1

account.X.send_anonymous_code Y 0 or 1

String within 32
account.X.anonymous_call_oncode Y
characters

Anonymous Call String within 32

account.X.anonymous_call_offcode Y
( X ranges from 1 to 5.) characters

account.X.reject_anonymous_call Y 0 or 1
 account.X.send_anonymous_rejection_code Y 0 or 1

String within 32
account.X.anonymous_reject_oncode Y
characters

String within 32
account.X.anonymous_reject_offcode Y
characters

account.X.auto_dial_enable Y 0 or 1

String within 32
account.X.auto_dial_num Y
characters
Advanced
( X ranges from 1 to 5.)

account.X.100rel_enable Y 0 or 1

account.X.enable_user_equal_phone Y 0 or 1

account.X.cid_source Y 0, 1, 2, 3, 4 or 5

CLIP
account.X.cid_source_privacy Y 0 or 1
( X ranges from 1 to 5.)

account.X.cid_source_ppi Y 0 or 1

COLP
account.X.cp_source Y 0, 1 or 2
( X ranges from 1 to 5.)

account.X.naptr_build Y 0 or 1

account.X.fallback.redundancy_type Y 0 or 1

Integer from 10 to
account.X.fallback.timeout Y
2147483647

String within 256

account.X.sip_server.Y.address Y
characters

Integer from 0 to
account.X.sip_server.Y.port Y
65535
 Integer from 30 to
account.X.sip_server.Y.expires Y
2147483647

account.X.sip_server.Y.retry_counts Y Integer from 0 to 20

Server Redundancy
( X ranges from 1 to 5, Y ranges
from 1 to 2.)
account.X.sip_server.Y.failback_mode Y 0, 1, 2 or 3

Integer 0, from 60 to
account.X.sip_server.Y.failback_timeout Y
65535

account.X.sip_server.Y.register_on_enable Y 0 or 1

Integer from 0 to
account.X.outbound_proxy_fallback_interval Y
65535

account.X.sip_server.Y.transport_type Y 0, 1, 2 or 3

account.X.static_cache_pri Y 0 or 1

account.X.dns_cache_type Y 0, 1 or 2

account.X.subscribe_mwi Y 0 or 1

Integer from
account.X.subscribe_mwi_expires Y 0 to 84600

Subscribe
( X ranges from 1 to 5.)

account.X.subscribe_register Y 0 or 1

account.X.subscribe_mwi_to_vm Y 0 or 1

String within 128

account.X.custom_ua Y
characters

Advanced
account.X.register_expires_overlap Y Positive integer
( X ranges from 1 to 5.)

account.X.subscribe_expires_overlap Y Positive integer

 account.X.session_timer.enable Y 0 or 1

Session Timer Integer from 30 to

account.X.session_timer.expires Y
( X ranges from 1 to 5.) 7200

account.X.session_timer.refresher Y 0 or 1

account.X.srtp_encryption Y 0, 1 or 2

Audio Advanced
( X ranges from 1 to 5.)
0, 10, 20, 30, 40, 50 or
account.X.ptime Y
60

account.X.shared_line Y 0 or 1

SCA
( X ranges from 1 to 5.)

features.display_sca_barge_in.enable Y 0 or 1

bw.enable Y 0 or 1

Broadsoft Setting

bw.feature_key_sync Y 0 or 1

bw.xsi.enable Y 0 or 1

String within 99
account.X.xsi.user Y
characters

String within 99
account.X.xsi.password Y
characters

Broadsoft
IP address or domain
XSI account.X.xsi.host Y
name
( X ranges from 1 to 5.)

account.X.xsi.server_type Y “http” or “https”

Integer from 1 to
account.X.xsi.port Y
65535

account.X.xsi.custom_url Y String
 bw.xsi.directory.enable Y 0 or 1

bw_phonebook.group_enable Y 0 or 1

bw_phonebook.personal_enable Y 0 or 1

bw_phonebook.group_common_enable Y 0 or 1

bw_phonebook.enterprise_enable Y 0 or 1

bw_phonebook.enterprise_common_enable Y 0 or 1

String within 99
Broadsoft phonebook bw_phonebook.group_displayname Y
characters

String within 99
bw_phonebook.enterprise_displayname Y
characters

String within 99
bw_phonebook.personal_displayname Y
characters

bw_phonebook.enterprise_common_display String within 99

Y
name characters

bw_phonebook.group_common_displaynam String within 99

Y
e characters

bw_phonebook.custom Y 0 or 1

Integer from 60 to
directory.update_time_interval Y
86400

Broadsoft Call Log bw.xsi.call_log.enable Y 0 or 1

features.call_park.park_mode N(W52H) 0 or 1

features.call_park.enable N(W52H) 0 or 1
 features.call_park.group_enable N(W52H) 0 or 1

features.call_park.park_ring N(W52H) 0 or 1

Broadsoft_Call Park

features.call_park.park_visual_notify_enable N(W52H) 0 or 1

String within 32
features.call_park.park_code N(W52H)
characters

String within 32
features.call_park.group_park_code N(W52H)
characters

String within 32
features.call_park.park_retrieve_code N(W52H)
characters

features.call_park.park_mode N(W52H) 0 or 1

features.call_park.enable N(W52H) 0 or 1

Call Park

String within 32
features.call_park.park_code N(W52H)
characters

String within 32
features.call_park.park_retrieve_code N(W52H)
characters

account.X.dtmf.type Y 0, 1, 2 or 3

DTMF
account.X.dtmf.info_type Y 1, 2 or 3
( X ranges from 1 to 5.)

Integer from 96 to
account.X.dtmf.dtmf_payload Y
127

account.X.conf_type Y 0 or 2
Conference
( X ranges from 1 to 5.)
SIP URI within 511
account.X.conf_uri Y
characters

account.X.codec.Y.enable Y 0 or 1
 PCMU
PCMA
G723_53
G723_63
G729
account.X.codec.Y.payload_type Y
G722
G726-32
iLBC

account.X.codec.Y.priority Y Integer from 0 to 10

Integer
Audio Codec
account.X.codec.Y.rtpmap Y from 0 to 127
(X ranges from 1 to 5.)

account.X.codec.<payload_type>.enable
(where <payload_type> should be replaced Y 0 or 1
by the name of audio codec)

account.X.codec.<payload_type>.priority
(where <payload_type> should be replaced Y Integer from 0 to 8
by the name of audio codec)

account.X.codec.<payload_type>.rtpmap
Integer
(where <payload_type> should be replaced Y
from 0 to 127
by the name of audio codec)

account.X.dnd.enable Y 0 or 1

Account DND String within 32

account.X.dnd.on_code Y
( X ranges from 1 to 5.) characters

String within 32
account.X.dnd.off_code Y
characters

account.X.always_fwd.enable Y 0 or 1

String within 32
account.X.always_fwd.target Y
characters

String within 32
account.X.always_fwd.off_code Y
characters

String within 32
account.X.always_fwd.on_code Y
characters

account.X.busy_fwd.enable Y 0 or 1

String within 32
account.X.busy_fwd.target Y
characters

Account Forward String within 32

account.X.busy_fwd.off_code Y
( X ranges from 1 to 5.) characters
 Account Forward
( X ranges from 1 to 5.)

String within 32
account.X.busy_fwd.on_code Y
characters

account.X.timeout_fwd.enable Y 0 or 1

String within 32
account.X.timeout_fwd.target Y
characters

account.X.timeout_fwd.timeout Y Integer from 0 to 20

String within 32
account.X.timeout_fwd.off_code Y
characters

String within 32
account.X.timeout_fwd.on_code Y
characters

Account Transfer account.X.transfer_refer_to_contact_header.

Y 0 or 1
( X ranges from 1 to 5.) enable

Local number Hidden

account.X.hide_local_number.enable Y 0 or 1
( X ranges from 1 to 5.)

Call Retriction
account.X.simultaneous_outgoing.num Y 1, 2, 3 or 4
( X ranges from 1 to 5.)
tion Parameters in MAC-Oriented.cfg File

Default Value Description Reboot

It configures the IP address mode.

0 Y
0-IPv4

1-IPv6
It configures the Internet (WAN) port type.
0 2-IPv4 Y
0-DHCP& IPv6

2-Static
It IP Address
configures the IP address.
Blank Y
Note: It works only if the value of the parameter
Example:
“static.network.ip_address_mode”
static.network.internet_port.ip is set to 0 (IPv4) or 2
= 192.168.1.20
(IPv4
It & IPv6).the subnet mask.
configures
Note:It works only if the value of the parameter
Blank “static.network.ip_address_mode” is set to 0 (IPv4) or 2 Y
Example:
(IPv4 & IPv6), and “static.network.internet_port.type”
static.network.internet_port.mask = 255.255.255.0 is set
toconfigures
It 2 (Static IPthe
Address).
default gateway.
Note: It works only if the value of the parameter
Blank “static.network.ip_address_mode” is set to 0 (IPv4) or 2 Y
Example:
(IPv4 & IPv6), and “static.network.internet_port.type”
static.network.internet_port.gateway = 192.168.1.254 is set
to 2 (Static IP Address).
It configures the primary IPv4 DNS server.
Note: It works only if the value of the parameter
Blank “static.network.ip_address_mode” is set to 0 (IPv4) or 2 Y
Example:
(IPv4 & IPv6), and “static.network.internet_port.type”
static.network.primary_dns = 202.101.103.55 is set
to 2 (Static IP Address).
It configures the secondary IPv4 DNS server.
Note: It works only if the value of the parameter
Blank "static.network.ip_address_mode" is set to 0 (IPv4) or 2 Y
Example:
(IPv4 & IPv6). In DHCP environment,
static.network.secondary_dns you also need to
= 202.101.103.54
make sure the value of the parameter
It triggers the static IPv6 DNS feature to on or off.
"static.network.static_dns_enable"
Note: is set
It works only if the value of the to 1 (On).
parameter
0 "static.network.ip_address_mode" is set to 0 (IPv4) or 2 Y
0-Off
(IPv4 & IPv6). In DHCP environment, you also need to
make
1-On
It sure thethe
configures value
IPv6ofprefix.
the parameter
"static.network.static_dns_enable" is set to 1 (On).
64 Y
If it is set
Note: to 0 (Off),
It works only the IP value
if the DECTofphone will use the IPv6
the parameter
DNS obtained from DHCP.
“static.network.ip_address_mode” is set to 1 (IPv6) or 2
(IPv4 & IPv6),the
It configures andInternet
"static.network.ipv6_internet_port.type"
port (WAN) type for IPv6.
If it
is setis to
set1to 1 (On),
(Static the IP DECT phone will use manually
IP Address).
0 configured static IPv6 DNS. Y
0-DHCP

1-Static
It IP Address
configures the IPv6 address.
Note: It works only if the value of the parameter
Blank “static.network.ipv6_internet_port.type” is set to 0 (DHCP). Y
Note: It works only if the value of the parameter
Example:
“static.network.ip_address_mode” is=set to 1 (IPv6) or 2
static.network.ipv6_internet_port.ip
(IPv4 & IPv6).the IPv6 default gateway.
2026:1234:1:1:215:65ff:fe1f:caa
It configures
Blank Note: It works only if the value of the parameter Y
Example:
“static.network.ip_address_mode” is set to =1 (IPv6) or 2
static.network.ipv6_internet_port.gateway
(IPv4 & IPv6), and "static.network.ipv6_internet_port.type"
3036:1:1:c3c7:c11c:5447:23a6:255
is set to 1 (Static IP Address).
Note: It works only if the value of the parameter
“static.network.ip_address_mode” is set to 1 (IPv6) or 2
(IPv4 & IPv6), and "static.network.ipv6_internet_port.type"
is set to 1 (Static IP Address).
 It configures the primary IPv6 DNS server.
Blank Example: Y
static.network.ipv6_primary_dns = 3036:1:1:c3c7:
c11c:5447:23a6:256
It configures the secondary IPv6 DNS server.
Blank Note: It works only if the value of the parameter Y
Example:
"static.network.ip_address_mode"
static.network.ipv6_secondary_dnsis=set to 1 (IPv6) or 2
(IPv4 & IPv6). In DHCP environment, you also need to
2026:1234:1:1:c3c7:c11c:5447:23a6
It configures the host name of the central report collector
make sure the value of the parameter
that accepts voice quality reports contained in SIP
Blank "static.network.ipv6_static_dns_enable"
Note: It works only for
if the value of is set to 1 (On). N
PUBLISH messages account X. the parameter
“static.network.ip_address_mode” is set to 1 (IPv6) or 2
(IPv4 & IPv6).the
It configures In DHCP environment,
IP address you also
of the central need
report to
collector
make sure the value of the parameter
that accepts voice quality reports contained in SIP
Blank “static.static.network.ipv6_static_dns_enable” is set to 1 N
PUBLISH messages for account X.
(On).
It configures the port of the central report collector that
accepts voice quality reports contained in SIP PUBLISH
5060 N
messages for account X.

It configures the time zone.

For more available time zones, refer to Time Zones sheet.
+8 N
Example:
local_time.time_zone
It configures the time=zone
+8 name.
The available time zone names depend on the time zone
China(Beijing) N
configured by the parameter “local_time.time_zone”.
For more information on the available time zone names
forconfigures
It each timethe
zone, refer to Time
IP address Zonesname
or domain sheet.of the NTP
server 1.
cn.pool.ntp.org Example: N
local_time.time_zone_name = China(Beijing)
Example:
local_time.ntp_server1
It = 192.168.0.5
configures the IP address or domain name of the NTP
Note: It works only if the value of the parameter
server 2.
pool.ntp.org “local_time.summer_time” is set to 2 (Automatic) and the N
If the NTP server 1 is not configured (configured by the
parameter “local_time.time_zone” should be configured in
parameter “local_time.ntp_server1”) or cannot be accessed,
advance.
the IP DECT phone
It configures will request
the interval the time
(in seconds) and date
to update from
time the
and
NTP server
date 2. NTP server.
from the
1000 N
Example:
local_time.ntp_server2
local_time.interval = 192.168.0.6
= 1000
It configures the Daylight Saving Time (DST) feature.
2 N
0-Disabled

1-Enabled
It configures the Daylight Saving Time (DST) time type.
0 N
2-Automatic
0-DST by Date

Note:
1-DST
It Ifbythere
configures Week is no
the available
start time oftimethe zone name
Daylight for the
Saving Time
configured time zone, you can set the value of the
(DST).
1/1/0 parameter “local_time.summer_time” N
Note: It works only if the value of theto be 1 (Enabled),
parameter
and configure
formatsthe
“local_time.summer_time”
Value are:DST timeis manually.
set to 1 (Enabled).
Month/Day/Hour
It configures the ending(for DST by of
time Date)
the Daylight Saving Time
Month/Week of Month/Day of Week/Hour of Day (for DST
(DST).
12/31/23 by Week) N
Value formats are:
If
It “local_time.dst_time_type”
Month/Day/Hour
configures the offset(for DST isDate)
timeby(in set to 0 (for
minutes) of DST by Date),
Daylight
use the
Month/Week mapping:
Saving Time (DST). of Month/Day of Week/Hour of Day (for DST
Blank Month:
by Week)1=January, 2=February,…, 12=December N
Day:
Note:1=the
It worksfirstonly
dayifinthe
a month,…, 31=parameter
value of the the last day in a
month
If “local_time.dst_time_type”
“local_time.summer_time” is set to 0 (DST by Date), use
It enables or disables the IPis DECT set tophone
1 (Enabled).
to update time
Hour:
the 0=0am, 1=1am,…, 23=11pm
mapping:
with the offset time offered by the DHCP server.
0 Month: 1=January, 2=February,…, 12=December N
Example:
Day: 1=the first day in a month,…, 31= the last day in a
0-Disabled
local_time.start_time = 1/1/2
month
Hour: 0=0am, 1=1am,…, 23=11pm
1-Enabled
If “local_time.dst_time_type” is set to 1 (for DST by Week),
use the mapping:
Example:
Note: It is only available to offset from Greenwich Mean
Month: 1=January, 2=February,…,
local_time.start_time = 12/12/22 12=December
Time (GMT).
Week of Month: 1=First in Month,…, 5=Last in Month
 It configures the format of date string.
Y = year, M = month, D = day, W = day of week
Blank N
Value formats are:
- Any combination of W, M, D and the separator (e.g.,
space, dash, slash).
It configures the access URL of the AutoDST file
(AutoDST.xml).
Blank N
Example:
lcl.datetime.date.format = W,MD
Example:
The IP DECT
or=phone
auto_dst.url
It enables will display thephone
date into“W,MD”
tftp://192.168.1.100/AutoDST.xml
disables the IP DECT format
obtain time
(e.g., Wed,0420).
and date from manual settings.
0 Note: It works only if the value of the parameter N
- Any combination of Y,and
"local_time.summer_time"
0-Diabled (obtain time M,isD, Wto
set
date and the separator
2 (Automatic).
from manual (e.g.,
settings)
space, dash, slash).
It configures the priority for the IP DECT phone to use the
1-Enabled
NTP server(obtain
addresstime and by
offered date
thefrom NTP
DHCP server)
server.
0 Example: N
lcl.datetime.date.format = YYYY-MMM-DDD-WWW
0-High (use the NTP server address offered by DHCP
The IP DECT phone will display the date in “YYYY-MMM-
preferentially)
It enables or disables the account X.
DDD-WWW” format (e.g., 2016-Apr-20-Wednesday).
N
0 1-Low (use the NTP server address configured manually
0-Disabled
Note: “Y”/”YY” represents a two-digit year, more than two
preferentially)
“Y” letters (e.g., YYYY) represent a four-digit year,
1-Enabled
It configures
“M”/“MM” the label atotwo-digit
represents be displayed on “MMM”
month, the LCD screen
for accountthe
represents X. abbreviation of the month, three or more
Blank N
than three “M” letters (e.g., MMM) represent the long
format of the month, one or more than one “D” (e.g.,
It configures
DDD) the display
represents name
a two-digit to “W”/“WW”
day, be displayed on the
represents
called party’s LCDofscreen
the abbreviation forofaccount
the day X
week, three or more three
Blank N
“W” letters (e.g., WWW) represent the long format of the
day of week. It works only if the value of the parameter
It configures the user name for register authentication
“auto_provision.handset_configured.enable” is set to 1 for
account X.
(Enabled).
Blank N

It configures the register user name for account X.

Blank N
Note: The register user name is provided by ITSP. It is
used to identify the account.
It configures the password for register authentication for
account X.
Blank N
Note: The password for register authentication is provided
by ITSP. or disables the IP DECT phone to send requests
It enables
to the outbound proxy server for account X.
0 N
0-Disabled
It configures the IP address or domain name of the
1-Enabled proxy server Y for account X.
outbound
Blank N
Example:
account.1.outbound_proxy.1.address=
It configures the port of the outbound 10.1.8.11
proxy server Y for
account X.
5060 Note: It works only if the value of the parameter N
“account.X.outbound_proxy_enable” is set to 1 (Enabled).
Example:
account.1.outbound_proxy.1.port = 5060
It configures the type of the SIP server for account X.
0 Note: It works only if the value of the parameter N
0-Default
“account.X.outbound_proxy_enable” is set to 1 (Enabled).
It enables or disables the IP DECT phone to unregister first
2-BroadSoft (It works account
before re-registering only if the valuefinishing
X when of the parameter
a reboot.
0 N
"bw.enable" is set to 1 (Enabled))
0-Disabled
8-Genesys
It configures the proxy server which is a special item for
1-Enabled
the Nortel server for account X.
Blank 10-Genesys Advanced N
 It enables or disables the IP DECT phone to add MAC
address to the SIP header of the REGISTER message for
0 N
account X.

0-Disabled
It enables or disables the IP DECT phone to add line
number to the SIP header of the REGISTER message for
1 N
1-Enabled
account X.

0-Disabled
It configures the interval (in seconds) for the IP DECT
phone to retry to re-register account X when registration
30 N
1-Enabled
fails.

Example:
It configures the base time period to wait (in seconds) for
account.1.reg_fail_retry_interval = 30
the IP DECT phone to retry to re-register account X when
0 N
registration fails.

Note:
It It is used
configures theinmaximum
conjunctiontime with the parameter
period to wait (in
"account.X.reg_failed_retry_max_time"
seconds) for the IP DECT phone to retry totodetermine
re-register how
0 N
long to wait.
account X when Theregistration
algorithm isfails.
defined in RFC 5626. We
recommend you to set this value to an integer greater
than
Note: 30
It ifis you
It enables used
or need tothe
configure
in conjunction
disables thisthe
with
NAT traversal parameter.
parameter
for account If the
X.
values of this parameter and the parameter
"account.X.reg_failed_retry_min_time" to determine how
0 "account.X.reg_failed_retry_max_time" areRFC
set5626.
to 0, the N
long to wait. The algorithm is defined in
0-Disabled We
interval
recommend configured
you to by set"account.X.reg_fail_retry_interval"
this value to an integer greater
will
than
1-STUNbe
30used.
if youthe
It configures need
typetoof
configure
keep-alive thispackets
parameter.
sent If
bythe
the IP
values of this parameter and
DECT phone to the NAT device to keep the the parameter
1 "account.X.reg_failed_retry_min_time" N
2-Manual
communication NAT port open so that NATare canset to 0, theto
continue
interval
functionconfigured
for accountbyX."account.X.reg_fail_retry_interval"
will
Note:
It beIfused.
it is set
configures thetokeep-alive
1 (STUN),interval
it works(inonly if the value
seconds) for of
the parameter
0-Disabled
account X. “sip.nat_stun.enable” is set to 1 (Enabled); if
30 it is set to 2 (Manual NAT), it works only if the value of the N
parameter(the
1-Default
Example: “network.static_nat.enable”
IP DECT phone sends UDP is set to 1 (Enabled).
packets to the
server).
account.1.nat.udp_update_time
It enables or disables the NAT RPort = 60 feature for account X.

0 2-Option
Note: (the IP
It works DECT
only phone
if the valuesends
of theSIP OPTIONS packets
parameter N
0-Disabled
to the server).
“account.X.nat.udp_update_enable” is set to 1, 2 or 3.
1-Enabled
It configures the voice mail number for account X.
3-Notify (the IP DECT phone sends SIP NOTIFY packets to
Blank the server). N
2-Enable
Example: Direct Process
voice_mail.number.1 = 1234
It enables or disables to display the anonymous call
setting on the handset.
0 N
0-Disable
It triggers the anonymous call feature to on or off for
1-EnableX.
account
0 N
0-Disabled
It configures the IP DECT phone to send anonymous
1-Enabled
on/off code to activate/deactivate the server-side
0 N
anonymous call feature for account X.
If it is set to 1 (On), the IP DECT phone will block its
identity
0-Off from the
Code
It configures showing up to the
anonymous callcallee
on codewhen placing athe
to activate call.
The callee’s anonymous
server-side phone LCD screen presents
call feature anonymous
for account X.
Blank instead of the caller’s identity. N
1-On Code
Example:
If
It it is set to 0the
(Off), the IP DECT
account.1.anonymous_call_oncode
configures anonymous callphone willtosend
off=code
*72 deactivate
anonymous off code to the server
the server-side anonymous call feature for when you deactivate
account X. the
Blank anonymous
Note: callonly
It works feature.
if the value of the parameter N
“account.X.send_anonymous_code” is set to 1 (On Code).
Example:
If it is set to
or1disables
(On), the IP DECT phone
account.1.anonymous_call_offcode
It enables phone-side will send
= *73
anonymous call rejection
anonymous on code
feature for account X. to the server when you activate the
0 anonymous
Note: callonly
It works feature.
if the value of the parameter N
“account.X.send_anonymous_code” is set to 0 (Off Code).
0-Off

1-On

If it is set to 1 (On), the IP DECT phone will automatically

reject incoming calls from users enabled anonymous call
feature. The anonymous user’s phone LCD screen presents
 It configures the IP DECT phone to send anonymous call
rejection on/off code to activate/deactivate the server-side
0 N
anonymous call rejection feature for account X.

0-Off Code the anonymous call rejection on code to

It configures
activate the server-side anonymous call rejection feature
Blank N
1-On
for Code X.
account

If
It it is set to 0the
Example:
configures (Offanonymous
Code), the call
IP DECT phone
rejection offwill
codesend
to
anonymous rejection off
account.1.anonymous_reject_oncodecode to the server
=
deactivate the server-side anonymous call rejection *74 when you
Blank deactivate N
feature for the anonymous
account X. call rejection feature.
Note: It works only if the value of the parameter
If it is set to
or1disables
(On Code),
the the IP DECT
“account.X.send_anonymous_rejection_code”
Example:
It enables phone phone will
to automatically send
is set to out
dial 1 a
anonymous
(On Code). rejection on code
account.1.anonymous_reject_offcode to the server
= *75
pre-configured number first when the user places a call when you
0 activate N
using thethe anonymous
account X. call rejection feature.
Note: It works only if the value of the parameter
“account.X.send_anonymous_rejection_code”
0-Disabled is set to 0
It configures the number that the phone automatically
(Off Code).
dials out first when the user places a call.
Blank N
1-Enabled
Note: It works only if the value of the parameter
If
It it is set to
or1disables
(Enabled),
“account.X.auto_dial_enable”
enables thethe
100phone
isreliable
set towill first dial out the
1retransmission
(Enabled).
pre-configured
feature number
for account X. (configured by the parameter
0 “account.X.auto_dial_num”) when a user dials out a call N
using account X.
0-Disabled
It enables or disables the IP DECT phone to add
Note: The server
1-Enabled
“user=phone” maySIP
to the prompt
headerthe
ofuser to entermessage
the INVITE an for
0 activation N
account X.code to use this account for call service. This
feature requires support from the SIP server.
0-Disabled
It configures the presentation of the caller identity when
receiving an incoming call for account X.
0 N
1-Enabled
0-FROM
It enables or disables the IP DECT phone to process
1-PAI header field in the SIP message for account X.
Privacy
1 N
2-PAI-FROM
0-Disabled
It enables or disables the IP DECT phone to process the P-
3-RPID-PAI-FROM(PPI) header for caller identity
1-Enabled
Preferred-Identity
1 N
presentation when receiving an incoming call for account
4-PAI-RPID-FROM
X.
It configures the presentation of the callee’s identity for
5-RPID-FROM
0-Disabled
account X.
0 N
1-Enabled
0-PAI-RPID
It configures the way of SRV query for the IP DECT phone
1-Dialed
to Digits when no result is returned from NAPTR
be performed
0 N
query for account X.
2-RFC4916
0-SRV
It query the
configures using UDP only mode for account X in
registration
Note: When
fallback mode.the RFC4916 is enabled on the IP DECT
0 phone,query
1-SRV the caller
usingsends
UDP,theTCPSIP request
and TLS. message which N
contains the from-change
0-Concurrent registration tag in the supported header.
The
It configures the time interval (in seconds) forfrom
caller then receives an UPDATE message the
the IP DECT
callee, and
1-Successive
phone displays the identity
registration
to detect whether in the server
the working ”From“isheader.
available by
120 N
sending the registration request for account X after the
Note: Itserver
fallback is not takes
applicable to outbound
over call control. proxy servers.
It configures the IP address or domain name of the SIP
Note:
server It works
Y for only ifX.the value of the parameter
account
Blank N
“account.X.fallback.redundancy_type” is set to 1
(Successive registration). It is not applicable to outbound
Example:
proxy
It servers.the port of SIP server
account.1.sip_server.1.address
configures = 10.2.1.48
Y for account X.
5060 N
Example:
account.1.sip_server.1.port = 5060

Note: If the value of this parameter is set to 0, the port

used depends on the value specified by the parameter
“account.X.sip_server.Y.transport_type”.
 It configures the registration expiration time (in seconds)
of SIP server Y for account X.
3600 N
Example:
account.1.sip_server.1.expires = the
It configures the retry times for 3600IP DECT phone to
resend requests when the SIP server Y is unavailable or
3 N
there is no response from the SIP server Y for account X.

Example:
It configures the mode for the IP DECT phone to retry the
account.1.sip_server.1.retry_counts= 3
primary server in failover mode for account X.
0 The IP DECT phone moves to the next available server N
after three failedall
0-newRequests: attempts.
requests are sent to the primary server
first,
It regardless
configures theoftimeout
the last(in server
seconds)that wasfor theused. IP DECT
phone to retry to send requests to the primary server after
3600 N
1-DNSTTL:
failing over the to theIP DECT
current phone
working will send
serverrequests
for account to the X.
last registered server first. If the time defined by DNSTTL
onyou
If
It theset
enables registered
the
or disables server
parameter theexpires,
to
IP0,DECTthetheIP phone
DECT
phone to will
phone retry
registerwilltoto
not
the
send requests
secondary to the
server beforeprimary
sending server.
server until ato
requests failover event
it for account
0 N
occurs
X whenwith the currenta working
encountering failover. server.
2-Registration: the IP DECT phone will send requests to
the
If
It youlastset
0-Disabled
configuresregistered
thethe server
parameter
time first. (in
between
interval If the registration
1 and
seconds) 59,for thethe expires,
timeout
IP DECT
the
will phone
phone be to will retry
60 detect
seconds. to send
whether therequests
workingto the primary
outbound proxyserver.
3600 N
1-Enabled
server is available by sending the registration request after
3-duration:
Note: It works
the fallback the IP DECT
only
server if thephone
takes value
over will send
ofcontrol.
call the requests to the
parameter
last registered server first.the
"account.X.sip_server.Y.failback_mode” If the time defined by3theattempt
It configures the transport method the IP set
If it is set to 0 (Disabled), IP DECT is
phone DECT to
won’tphone
“account.X.sip_server.Y.failback_timeout”
(duration).
to register
Example: to the secondary server, since parameter
the phone
uses to communicate with the SIP server for account X.
0 expires,
assumesthe thatphone will retry
the primary
account.1.outbound_proxy_fallback_interval and tosecondary
send requests =to
servers the
3600share N
primary server.
registration information. So the IP DECT phone will directly
0-UDP
send
Note:
It the
It isrequests
configures onlywhether to the
applicable secondary
to outbound
preferentially server.
to proxy
use the servers.
static
Note: DNSTTL, Registration and duration mode can DNS
only
1-TCP for domain name resolution of the SIP server for
cache
0 be
If processed when the IP DECT phone
it is setX.to 1 (Enabled), the IP DECT phone will register is idle (that is, noto N
account
incoming/outbound calls, no active calls or meetings, etc.).
the
2-TLS secondary server first, and then send the requests to it.
0-Use
It domainwhether
configures name resolution
the IP DECT from server
phone uses preferentially
the DNS
Note:
3-DNS-NAPTRIt works only if the value of the parameter
cache for domain name resolution of the server and
1 "account.X.sip_server.Y.failback_mode” is set to 3 N
1-Use static
caches DNS cache
the additional DNSpreferentially
records for account X.
(duration).
If the value of this parameter is set to 3 (DNS-NAPTR), the
value
Example:
0-Perform
It enablesof the or parameter
real-time
disablesDNS “account.X.sip_server.Y.address”
the query
IP DECT rather
phone thanto using
subscribeDNSthe is
set to a host name
account.1.static_cache_pri
cache.
message waiting and the=for
indicator value
1 accountof theX.parameter
0 “account.X.sip_server.Y.port” is set to 0, the IP DECT phone N
will
1-Use perform
0-Disabled DNS cache,the DNS butNAPTR
do not and record SRVthequeries
additionalfor the
transport protocol, ports and servers.
records.
It configures MWI subscribe expiry time (in seconds) for
1-Enabled
account X. The IP DECT phone is able to successfully
3600 If the value
2-Use DNS of thisand
cache parameter
cache is set
the to 3 (DNS-NAPTR),
additional DNS records. the N
refresh the SUBSCRIBE for message-summary events
value of
If it is set the parameter
to 1 (Enabled), “account.X.sip_server.Y.address”
the IP DECT phone is
before expiration of the subscription dialog.will send a
set to
Example:
SUBSCRIBE an IP address and the value of the parameter
It enables ormessage disablesto thethe servertofor
phone message-summary
subscribe to the
“account.X.sip_server.Y.port”
account.1.dns_cache_type
updates. = 1is set to an explicit port
Note: It status
register works for onlyaccount
if the value
X. of the parameter
0 (except 0), then UDP is used. N
“account.X.subscribe_mwi” is set to 1 (Enabled).
If it is set to 0 (Disabled), the server automatically sends a
0-Disabled
message-summary
It enables or disables NOTIFY
the IP in DECTa new dialog
phone to each time the
subscribe the
MWI status changes. (This requires
1-Enabledwaiting indicator to the voice mail number for
message server support)
0 N
account X.

0-Disabled
It configures the suffix of User-Agent in SIP request
messages from the IP DECT phone for account X.
Blank N
1-Enabled
Default value of User-Agent: Yealink W52P 25.80.0.10
If
It it is set to 0
configures (Disabled),
Myphone,
the thethe
renewal IP(in
DECT
User-Agent
time phone willassubscribe
appears
seconds) away below:
from the
the message
Yealink W52P waiting indicator
25.80.0.10
registration lease. to
Myphone the account X.
-1 N
Note: It works only if the value of the parameters
“account.X.subscribe_mwi” is set
It configures the renewal time (into 1 (Enabled)
seconds) awayand
from the
“voice_mail.number.X”
subscription lease. is configured.
-1 N
 It enables or disables the session timer for account X.
0 N
0-Disabled

1-Enabled
It configures the interval (in seconds) for refreshing the SIP
session during a call for account X. For example, an
1800 N
If it is setwill
UPDATE to 1be
(Enabled),
sent afterthe
50% IP of
DECT phonehas
its value willelapsed.
send
periodic UPDATE requests to refresh the session during a
call.
If it
It is set to 1800
configures (1800s), of
the function theendpoint
IP DECT when
phoneinitiating
will refresh
the
the
SIP session during a call for before 900 seconds.
account X.
0 N
Example:
0-UAC
account.1.session_timer.expires
It configures whether to use voice= 1800
encryption service for
1-UAS X.
account
0 Note: It works only if the value of the parameter N
“account.X.session_timer.enable”
Note: It works only if the value ofisthe
0-Disabled setparameter
to 1 (Enabled).
“account.X.session_timer.enable”
It is set tofor
configures the ptime (in milliseconds) 1 (Enabled).
the codec for
1-Optional
account X.
20 N
2-Compulsory
0-Disabled
It enables or disables shared call appearance feature.
If it is set to 0 (Disabled), the IP DECT phone will not use
10-10
0 voice encryption service. N
0-Disabled
20-20
If it is set to
1-Shared
It enables or1disables
Call (Optional),
Appearance the IP DECT
to display phone
the barge in will
soft negotiate
key
with
30-30 the other
during a SCA call. IP DECT phone what type of encryption to
1 utilize for to
the0 session. N
If it is set (Disabled), the shared line feature is
40-40
disabled.
0-Disabled
If it is set to 2 (Compulsory), the IP DECT phone is forced
It enables or disables the BroadSoft features for IP DECT
to use SRTP during a call.
50-50
1-Enabled
phones.
0 Y
60-60
0-Disabled
It enables or disables feature key synchronization.
Example:
1-Enabled
0 account.1.ptime = 20 N
0-Disabled

1-Enabled
It enables or disables the XSI anthentication feature for the
IP DECT phone.
0 Y
0-Disabled
It configures the user name for XSI authentication for
1-Enabled
account X.
Blank N
If it is set to 0 (Disabled), the following features are
Example:
unavailable
It configureson
account.1.xsi.userthethe =phone:
[email protected]
password for XSI authentication for
BroadWorks
account X. Anywhere
Blank Remote N
Note: It Office
works only if the value of the parameter
Line ID Blockingis set to 1 (Enabled).
"bw.xsi.enable"
Example:
Anonymous
It configures Callthe Rejection
account.1.xsi.password = 123456
IP address or domain name of the
Simultaneous
Xtended Services RingPlatform
Personalserver for account X.
Blank BroadSoft Directory N
Note: It works only if the value of the parameters
BroadSoft
Example: Call Log
“sip.authentication_for_xsi” is set to 0 (User Login
Call Park Feature
Credentials via XSI Mode
It configures the access protocol ofand
for
account.1.xsi.host XSI =Authentication) the "bw.xsi.enable"
xsp1.iop1.broadworks.net
Xtended Servicesis
set to 1 (Enabled).
Platform server for account X.
http Note: N
Note: It It works
works only
only if
if the
the value
value of
of the
the parameter
parameter
"bw.enable" is set to 1 (Enabled).
"bw.xsi.enable" is set to 1 (Enabled).
Example:
account.1.xsi.server_type
It configures the port of the = http
Xtended Services Platform
server for account X.
80 N
Note: It works only if the value of the parameter
"bw.xsi.enable" is set to 1 (Enabled).
Example:
account.1.xsi.port
It configures the string = 80 to replace "com.broadsoft.xsi-
actions" in XSI URL.
Blank N
Note: It works only if the value of the parameter
"bw.xsi.enable" is set to 1 (Enabled).
Example:
account.X.xsi.custom_url = abc.com-actions

Note: It works only if the value of the parameter

"bw.xsi.enable" is set to 1 (Enabled).
 It enables or disables the network directory feature for the
IP DECT phone.
0 N
0-Disabled
It enables or disables the IP DECT phone to display the
1-Enabled
group directory.
1 N
Note: It works only if the value of the parameter
0-Disabled
"bw.xsi.enable" is set to
It enables or disables the1 IP
(Enabled).
DECT phone to display the
1-Enabled
personal directory.
1 N
Note: It works only if XSI is configured for account 1 and
0-Disabled
the
It value of
enables orthe parameter
disables the IP"bw.xsi.directory.enable"
DECT phone to display theis set
to 1 (Enabled).
1-Enabled
group common directory.
1 N
Note: It works only if XSI is configured for account 1 and
0-Disabled
the
It value of
enables orthe parameter
disables the IP"bw.xsi.directory.enable"
DECT phone to display theis set
to 1 (Enabled).
1-Enabled
enterprise directory.
1 N
Note: It works only if XSI is configured for account 1 and
0-Disabled
the
It enables of
value orthe parameter
disables the IP"bw.xsi.directory.enable"
DECT phone to display theis set
to 1 (Enabled).
1-Enabled
enterprise common directory.
1 N
Note: It works only if XSI is configured for account 1 and
0-Disabled
the value of the
It configures theparameter "bw.xsi.directory.enable"
display name on the LCD screen foristhe
set
to 1 (Enabled).
1-Enabled
group directory.
Group N
Note: It works only if XSI is configured for account 1 and
the
It value of the
parameters
configures parameter "bw.xsi.directory.enable"
the"bw.xsi.directory.enable"
display name on the LCD screen foristhe
and set
to 1 (Enabled).
"bw_phonebook.group_enable"
enterprise directory. are set to 1 (Enabled).
Enterprise N
Note: It works only if XSI is configured for account 1 and
the
It parameters
configures the"bw.xsi.directory.enable"
display name on the LCDand screen for the
"bw_phonebook.enterprise_enable"
personal directory. are set to 1 (Enabled).
Personal N
Note: It works only if XSI is configured for account 1 and
the parameters
It configures the"bw.xsi.directory.enable"
display name on the LCD andscreen for the
"bw_phonebook.personal_enable"
enterprise common directory. are set to 1 (Enabled).
EnterpriseCommon N
Note: It works only if XSI is configured for account 1 and
the
It parameters
configures the"bw.xsi.directory.enable"
display name on the LCD and
screen for the
"bw_phonebook.enterprise_common_enable"
group common directory. are set to 1
GroupCommon N
(Enabled).
Note: It works only if XSI is configured for account 1 and
the
It parameters
enables "bw.xsi.directory.enable"
or disables the custom directoryand
feature.
"bw_phonebook.group_common_enable" are set to 1
0 (Enabled). N
0-Disabled

1-Enabled
It configures the interval (in minutes) for the phone to
update the data of the BroadSoft phonebook.
1440 It enables or disables the is
network call log N
Note: It works only if XSI configured for feature.
account 1 and
the parameters "bw.xsi.directory.enable" is set to 1
0-Disabled
(Enabled).

0 1-Enabled N

Note: It works only if XSI is configured for account 1 and

It
theconfigures theparameter
value of the call park mode.
bw.xsi.enable" is set to 1
0 (Enabled). N
0-XSI

1-FAC
It enables or disables the IP DECT phone to display Park
option during a call.
0 N
0-Disabled

1-Enabled
 It enables or disables the IP DECT phone to display GPark
option during a call.
0 N
0-Disabled
It enables or disables the IP DECT phone to play a warning
1-Enabled
tone when a call is parked against its line.
0 N
0-Disabled
It enables or disables the IP DECT phone to display a
1-Enabled
parked indicator when a call is parked against its line.
0 N
Note: It works only if the value of the parameter
0-Disabled
“features.call_park.park_visual_notify_enable”
It is set
configures the call park code for Park option whento call
1
(Enabled).
1-Enabled
park mode is configured as FAC.
Blank N
Note: It works only if the value of the parameter
“features.call_park.park_mode”
It configures the group call parkiscode
set tofor
1 (FAC).
Gpark option
when call park mode is configured as FAC.
Blank N
Note: It works only if the value of the parameter
“features.call_park.park_mode” is setfor
It configures the park retrieve code to Retrieve
1 (FAC). soft key
V81变革:
when call park mode is configured as FAC. retrieve在提示开启
Blank N
的情况下才会出现
Note: It works only if the value of the parameter
“features.call_park.park_mode”
It configures the call park mode.is set to 1 (FAC).
0 N
1-FAC

2-Transfer
It (if disables
enables or bw.enablethe=IP0)DECT phone to display the
Park option during a call.
0 N
0-Disabled
It configures the call park code for the Park option.
1-Enabled
This call park code will also apply to the call park option.
Blank N
Example:
features.call_park.park_code
It configures the park retrieve= code.
*68

Blank N
Example:
features.call_park.park_retrieve_code = *88
It configures the DTMF type for account X.
1 N
0-INBAND

1-RFC2833
It configures the DTMF info type for account X.
1 N
2-SIP INFO
1-DTMF-Relay

3-AUTO+SIP
2-DTMF
It INFO
configures the value of DTMF payload for account X.
101 If it is set to 0 (INBAND), N
3-Telephone-Event
Note: It works only if theDTMF digits
value of are transmitted in
parameter
the voice band.
“account.X.dtmf.type” is set to 1 (RFC2833 ) or 3 (RFC2833
Note:
+ It works
SIP INFO).
It configures only
the if the value
conference of for
type parameter
account X.
If it is set to 1 (RFC 2833),
“account.X.dtmf.type” DTMF
is set digits
to 2 (SIP are transmitted
INFO) by
or 3 (RFC2833
0 RTP Events
+ SIP INFO). compliant to RFC 2833. N
When Y=1, the default value 0-Local Conference
is 1;
If it is set toConference
2-Network 2 (SIP INFO), DTMF digits are transmitted by
When Y=2, the default value It configures the network conference URI for account X.
the SIP INFO messages.
is 1; Blank N
When Y=3, the default value Example:
If it is set to 0 (Local Conference), conferences are set up
If
onitthe
is set
IP to 3 (RFC2833
account.1.conf_uri
DECT phone + SIP INFO), DTMF digits are
= [email protected]
locally.
is 0;
transmitted by RTP Events compliant to RFC 2833 and the
When Y=4, the default value It enables or disables the specified codec for account X.
SIP
If it INFO
Note: is set messages.
It works only if theConference),
to 2 (Network value of theconferences
parameter are set
is 0;
“account.X.conf_type”
up by the server. is set to 2 (Network Conference). N
When Y=5, the default value 0-Disabled
is 1;
When Y=6, the default value 1-Enabled
is 1;
When Y=7, the default value Example:
is 0; account.1.codec.1.enable = 1
When Y=8, the default value It means that the codec PCMU is enabled on the account
is 0; 1.
is PCMU;
When Y=2, the default value
is PCMA;
Y=3, the default value
When Y=1,
G723_53;
is 2;
When Y=4,
Y=2, the default value It configures the payload type of the specified codec for
G723_63;
is 3; account X.
N
Y=5,
When Y=3,
Y=1, the default value
is 0;
is G729;
4; Example:
When
When Y=6,
Y=4, the
Y=2, the default
default value
value account.1.codec.1.payload_type = PCMUcodec for account
It configures the priority of the enabled
When
G722;
is 0;
8; audio codec is G722, X.
the
When default
Y=7, value is 1; value
the default
default value Note: It is only applicable to the IP DECT phones running N
When Y=5,
Y=3, the
When
is 4;
is audio
G726-32; codec is PCMU, firmware version 81 or prior.
Example:
the default
Y=6, value is 1; value account.1.codec.1.priority
When
When Y=8,
Y=4, the
the default
default value It configures the rtpmap of=the
2 audio codec for account X.
When
iLBC
is 1;
4; audio codec PCMA,
is G722,
the default
Y=7, value is 1; value Note: The priority of codec in disable codec list is not N
When Y=5, the default Example:
When
0;
is 18; audio codec G729,
is PCMU, specified, and numerical value
account.1.codec.1.rtpmap = 0 1 is defined as the highest
the
When default
Y=8,
Y=6, value
the is 1;
2;
default value priority in the enable codec list. It is only applicable to the
It enables or disables the specified audio codec for
When
When
is 0; audio
audio codec
codec is
is iLBC,
PCMA,
G722, IP DECT
Note: It phones
is running firmware version 81 or prior.
9; account X. only applicable to the IP DECT phones running
the
the
When default
Y=7, value
default value is
is 0;
3; value
9;
the default firmware version 81 or prior. N
When
is 2; audio codec G726-
is G729,
PCMU, 0-Disabled
32,
When Y=8, the default 0;
the the default
default value
value is 4;
0; is value
When It configures the priority of the enabled audio codec for
is 97; audio
When audio codec
codec isis PCMA, 1-Enabled
account X.
G723_63,
G726_32,
the defaultthe default
value is 8;value is N
0;
When audio codec is G729, Valid Audio Codec:
When
the audiovalue
default codecis is
18;iLBC, G722, PCMU,the
It configures PCMA, G729,
rtpmap of iLBC, G726-32,
the audio codecG723_63,
for account X.
G723_53,
the default
When the
audio default
value
codec 0;value is
is is
G723_53.
0;
When audio codec is
G726_32, the default value is N
Valid Audio Codec:
G723_53, the default value is
102; Example:
G722, PCMU, PCMA, G729, iLBC, G726-32, G723_63,
0;
When audio codec is iLBC, account.1.codec.g722.enable ==11
account.1.codec.g722.priority
G723_53.
It triggers the DND feature to on or off for account X.
When
the audiovalue
default codecis is
106; account.1.codec.pcmu.enable ==12
account.1.codec.pcmu.priority
G723_63,
When audio thecodec
default
0 is value is account.1.codec.pcma.enable ==13
account.1.codec.pcma.priority N
Example:
0-Off
0;
G723_53, the default value is account.1.codec.g729.enable ==19
account.1.codec.g729.priority 4
account.1.codec.g722.priority
4; account.1.codec.ilbc.enable
account.1.codec.pcmu.priority = 0= 0
When audio codec is 1-On
It configures the DND on code to=activate the server-side
account.1.codec.g726-32.enable
Note: The priority of codec
account.1.codec.pcma.priority in = 8 0 codec list is not
disable
G723_63, theBlank
default value is DND feature for account
account.1.codec.g723_63.enable X. = defined
0
specified, and numerical value=1 8is
account.1.codec.g729.priority as the highest N
4; If
Theit is
IPset
DECTto 1phone
(On), the
will IP DECT
send thephone
DND willcode
on rejecttoincoming
the
account.1.codec.g723_53.enable
priority in the enable codec =
account.1.codec.ilbc.enable list.
102 =
The 0 name of audio codec
calls onwhen
server account
you X.activate DND feature for account X on
in this parameter should be
account.1.codec.g726-32.enable = 106 the correct one as listed in the
the
It
Note: IP DECT
configures
The phone.
the
name DND
of off
audio code
codec toindeactivate
this the
parameter server-
should
above example, otherwise
account.1.codec.g723_63.enable = 4 the corresponding
side
be the DND
configuration feature
correct onefor
will as account
not listed
account.1.codec.g723_53.enable in X.
the=above
take effect. 4 example,
Blank Example: N
The
otherwise the corresponding the
IP DECT phone will send DND off code
configuration to the
will not take
account.1.dnd.on_code
server when you deactivate= *73DNDinfeature for account X on
effect. The
Note: name of audio codec this parameter should
the
be IP DECT
It triggers
the phone.
the
correct always
one as forward
listed in feature
the above to on or off for
example,
account
otherwise X.the corresponding configuration will not take
0 Example: N
effect.
account.1.dnd.off_code
0-Off = *74
It configures the target number of the always forward for
1-On
account X.
Blank N
If it is set to 1 (On), incoming calls to the account X are
Example:
forwarded
It configures to the
the always
target number
account.1.always_fwd.target immediately.
= 1003
forward off code to deactivate the
server-side always forward feature for account X.
Blank N
The IP DECT phone will send the always forward off code
to the server when you deactivate always forward feature
forconfigures
It account Xthe
on always
the IP DECT phone.
forward on code to activate the
server-side always forward feature for account X.
Blank Example: N
The IP DECT phone will send the always forward on code
account.1.always_fwd.off_code = *73 to the server when
and the pre-configured target number
you activate always forward feature foron
It triggers the busy forward feature to account X on the
or off for
IP DECT phone.
account X.
0 N
Example:
0-Off
account.1.always_fwd.on_code = *72
It configures the target number of the busy forward for
1-On
account X.
Blank N
If it is set to 1 (On), incoming calls to the account X are
Example:
forwarded to the
the busy
destination
account.1.busy_fwd.target
It configures number
= 3602
forward off codewhen the calleethe
to deactivate is
busy.
server-side busy forward feature for account X.
Blank N
The IP DECT phone will send the busy forward off code to
the server when you deactivate busy forward feature for
account X on the IP DECT phone.

Example:
account.1.busy_fwd.off_code = *75
 It configures the busy forward on code to activate the
server-side busy forward feature for account X.
Blank N
The IP DECT phone will send the busy forward on code
and the pre-configured target number to the server when
you activate
It triggers thebusy forwardforward
no answer featurefeature
for account
to onXor
onoff
theforIP
DECT phone.
account X.
0 N
Example:
0-Off
account.1.busy_fwd.on_code = *74
It configures the target number of the no answer forward
1-On
for account X.
Blank N
If it is set to 1 (On), incoming calls to the account X are
Example:
forwarded to ring
the destination
times (N) tonumber
account.1.timeout_fwd.target
It configures =wait
3603 afterforwarding
before a period of ring
time.
incoming calls for account X.
2 N
Incoming calls will be forwarded when not answered after
N*6 seconds.
It configures the no answer forward off code to deactivate
the server-side no answer forward feature for account X.
Blank N
The IP DECT phone will send the no answer forward off
code to the server when you deactivate no answer forward
feature for account
It configures the no Xanswer
on theforward
IP DECTonphone.
code to activate
the server-side no answer forward feature for account X.
Blank Example: N
The IP DECT phone will send the no answer forward on
account.1.timeout_fwd.off_code
code and the pre-configured target = *77
number to the server
when
It you or
enables activate no the
disables answer forward
Refer feature
-To header to for
useaccount
the
X on the IP DECT
information of thephone.
Contact header in the second 200 OK
0 N
message when attended transfer.
Example:
account.1.timeout_fwd.on_code
0-Disabled = *76
It enables or disables the handset to hide the account
information on the pre-dialing, dialing or ringing screen.
0 1-Enabled N
0-Disabled
It configures the number of simultaneous outgoing calls
1-Enabled
for account X on a base.
4 N
If it is set
Note: ThetoIP1DECT
(Enabled),
Phonethe LCD screen
supports up towill display Line X
4 simultaneous
(X ranges from 1 to 5 for the corresponding account)
calls.
instead of account information.
 Web User Interface Handset User Interface Further Reference

OK->Settings->System Settings-
Network->Basic->Internet
>Network (default PIN: 0000)->Basic- Yealink IP DECT Phones Administrator Guide
Port->Mode(IPv4/IPv6)
>IP Mode

OK->Settings->System Settings-
Network->Basic->IPv4
>Network (default PIN: 0000)->Basic- Yealink IP DECT Phones Administrator Guide
Config
>IPv4->IP Address Type

OK->Settings->System Settings-
Network->Basic->IPv4
>Network (default PIN: 0000)->Basic-
Config->Static IP Address- Yealink IP DECT Phones Administrator Guide
>IPv4->IP Address Type: Static->IP
>IP Address
Address
OK->Settings->System Settings-
Network->Basic->IPv4
>Network (default PIN: 0000)->Basic-
Config->Static IP Address- Yealink IP DECT Phones Administrator Guide
>IPv4->IP Address Type: Static-
>Subnet Mask
>Subnet Mask
OK->Settings->System Settings-
Network->Basic->IPv4
>Network
For DHCP:(default PIN: 0000)->Basic-
Config->Static IP Address- Yealink IP DECT Phones Administrator Guide
>IPv4->IP Address Type:Settings-
OK->Settings->System Static-
>Gateway
>Default Gateway
>Network (default PIN: 0000)->Basic
>IPv4->IP Address Type: DHCP->DNS
Network->Basic->IPv4
Type: Manual->Primary DNS
For DHCP:
Config->Static IP Address- Yealink IP DECT Phones Administrator Guide
For Static IP address: Settings-
OK->Settings->System
>Static DNS->Primary DNS
OK->Settings->System
>Network Settings-
(default PIN: 0000)->Basic-
>Network
>IPv4->IP (default
Address PIN:
Type:0000)->Basic-
DHCP->DNS
Network->Basic->IPv4 >IPv4->IP Address Type: Static-
Type: Manual->Secondary DNS
Config->Static DNS- >Primary Yealink IP DECT Phones Administrator Guide
For StaticDNS
IP address:
>Secondary DNS
OK->Settings->System Settings-
>Network (default PIN: 0000)->Basic-
OK->Settings->System Settings-
Network->Basic->IPv6 >IPv4->IP Address PIN:
>Network (default Type:0000)->Basic-
Static-
>Secondary DNS Yealink IP DECT Phones Administrator Guide
Config->IPv6 Static DNS >IPv6->IP Address Type: DHCP->DNS
Type: Manual
OK->Settings->System Settings-
Network->Basic->IPv6
>Network (default PIN: 0000)->Basic-
Config->Static IP Address- Yealink IP DECT Phones Administrator Guide
>IPv6->IP Address Type: Static->IPv6
>IPv6 Prefix(0~128)
Prefix

OK->Settings->System Settings-
Network->Basic->IPv6
>Network (default PIN: 0000)->Basic- Yealink IP DECT Phones Administrator Guide
Config
>IPv6->IP Address Type

OK->Settings->System Settings-
Network->Basic->IPv6
>Network (default PIN: 0000)->Basic-
Config->Static IP Address- Yealink IP DECT Phones Administrator Guide
>IPv6->IP Address Type: Static->IP
>IP Address
Address
OK->Settings->System Settings-
Network->Basic->IPv6
>Network (default PIN: 0000)->Basic-
Config->Static IP Address- Yealink IP DECT Phones Administrator Guide
>IPv6->IP Address Type: Static-
>Default Gateway
>Default Gateway
 For DHCP:
OK->Settings->System Settings-
>Network (default PIN: 0000)->Basic-
>IPv6->IP Address Type: DHCP-DNS
Network->Basic->IPv6 Type:
For Manual->Primary DNS
DHCP:
Config->Static IP Address- For Static IP address: Settings-
OK->Settings->System Yealink IP DECT Phones Administrator Guide
>Primary DNS OK->Settings->System Settings-
>Network (default PIN: 0000)->Basic-
>Network (default
>IPv6->IP Address PIN:
Type:0000)->Basic-
DHCP-DNS
Network->Basic->IPv6 >IPv6->IP Address Type: Static-
Type: Manual->Secondary DNS
>Primary
Config->Static IP Address- For StaticDNS
IP address: Yealink IP DECT Phones Administrator Guide
>Secondary DNS OK->Settings->System Settings-
>Network (default PIN: 0000)->Basic-
>IPv6->IP Address Type: Static-
Account->Advanced->VQ >Secondary DNS
/ Yealink IP DECT Phones Administrator Guide
RTCP-XR Collector Name

Account->Advanced->VQ
/ Yealink IP DECT Phones Administrator Guide
RTCP-XR Collector Address

Account->Advanced->VQ
/ Yealink IP DECT Phones Administrator Guide
RTCP-XR Collector Port

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Time Zone

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Location

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Primary Server

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Secondary Server

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Synchronism (15~86400s)

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Daylight Saving Time

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Fixed Type

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Start Date

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>End Date

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Offset(minutes)

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>DHCP Time
/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>Manual Time

Settings->Time & Date-

/ Yealink IP DECT Phones Administrator Guide
>NTP by DHCP Priority

Account->Register->Line
/ Yealink IP DECT Phones Administrator Guide
Active

Account->Register->Label / Yealink IP DECT Phones Administrator Guide

Account->Register-
/ Yealink IP DECT Phones Administrator Guide
>Display Name

Account->Register-
/ Yealink IP DECT Phones Administrator Guide
>Register Name

Account->Register->User
/ Yealink IP DECT Phones Administrator Guide
Name

Account->Register-
/ Yealink IP DECT Phones Administrator Guide
>Password

OK->Settings->Telephony->Server
Account->Register->Enable
(default PIN: 0000)->Outbound Proxy Yealink IP DECT Phones Administrator Guide
Outbound Proxy Server
(Account X)->Outbound Proxy Server

Account->Register-
>Outbound Proxy Server / Yealink IP DECT Phones Administrator Guide
Y>Port

OK->Settings->Telephony->Server
Account->Register-
(default PIN: 0000)->Outbound Proxy
>Outbound Proxy Server Y- Yealink IP DECT Phones Administrator Guide
(Account X)->Port (only applicable to
>Port
port 1)

Account->Advanced->SIP
/
Server Type

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Unregister When Reboot

Account->Basic->Proxy
/
Require
Account->Advanced->SIP
/ Yealink IP DECT Phones Administrator Guide
Send MAC

Account->Advanced->SIP
/ Yealink IP DECT Phones Administrator Guide
Send Line

Account->Advanced->SIP
Registration Retry / Yealink IP DECT Phones Administrator Guide
Timer(0~1800)

/ /

/ /

Account->Register->NAT / Yealink IP DECT Phones Administrator Guide

Account->Advanced->Keep
/ Yealink IP DECT Phones Administrator Guide
Alive Type

Account->Advanced->Keep
/ Yealink IP DECT Phones Administrator Guide
Alive Interval(Seconds)

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Rport

Account->Advanced- OK->Voice Mail->Set Voice Mail-

Yealink IP DECT Phones Administrator Guide
>Voice Mail >LineX->Number

/ / Yealink IP DECT Phones Administrator Guide

OK->Call Features->Anonymous Call-

>Line X->Status (only display when
Account->Basic->Local
the parameter Yealink IP DECT Phones Administrator Guide
Anonymous
“features.provision_anonymous_call_o
n_gui.enable” is set to 1)

Account->Basic->Send
/ Yealink IP DECT Phones Administrator Guide
Anonymous Code

Account->Basic->Send
Anonymous Code->On / Yealink IP DECT Phones Administrator Guide
Code

Account->Basic->Send
Anonymous Code->Off / Yealink IP DECT Phones Administrator Guide
Code

Account->Basic->Local OK->Call Features->Anon.Call

Yealink IP DECT Phones Administrator Guide
Anonymous Rejection Rejection->Line X->Status
Account->Basic->Send
/ Yealink IP DECT Phones Administrator Guide
Anonymous Rejection Code

Account->Basic->Send
Anonymous Rejection / Yealink IP DECT Phones Administrator Guide
Code->On Code

Account->Basic->Send
Anonymous Rejection / Yealink IP DECT Phones Administrator Guide
Code->Off Code

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Retransmission

Account->Advanced->Send
/ Yealink IP DECT Phones Administrator Guide
user=phone

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Caller ID Header

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

Account->Register->SIP
/ Yealink IP DECT Phones Administrator Guide
Server Y->Server Host

OK->Settings->Telephony->Server
Account->Register->SIP
(default PIN: 0000)->Server Y (Account Yealink IP DECT Phones Administrator Guide
Server Y->Port
X)->Port
Account->Register->SIP
/ Yealink IP DECT Phones Administrator Guide
Server Y->Server Expires

Account->Register->SIP
Server Y->Server Retry / Yealink IP DECT Phones Administrator Guide
Counts

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

Account->Register->Proxy
/ Server Redundancy on Yealink IP Phones
Fallback Interval

Account->Register->SIP
Server Y->Transport
/ Yealink IP DECT Phones Administrator Guide

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Subscribe for MWI

Account->Advanced->MWI
Subscription Period / Yealink IP DECT Phones Administrator Guide
(Seconds)

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Subscribe Register

Account->Advanced-
>Subscribe MWI To Voice / Yealink IP DECT Phones Administrator Guide
Mail

/ /

/ /

/ /
Account->Advanced->Use
/ Yealink IP DECT Phones Administrator Guide
Session Timer

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Session Expires(30~7200s)

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Session Refresher

Account->Advanced->RTP
/ Yealink IP DECT Phones Administrator Guide
Encryption(SRTP)

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>PTime(ms)

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Shared Line

/ / Yealink IP DECT Phones Administrator Guide

Yealink IP Phones BroadSoft UC-One

/ /
Environment Guide

Features->General
Information->Feature Key / Yealink IP DECT Phones Administrator Guide
Synchronization

Yealink IP Phones BroadSoft UC-One

/ /
Environment Guide

Applications->Broadsoft
XSI->XSI Account->User ID Yealink IP Phones BroadSoft UC-One
/
(if bw.enable =1 and Environment Guide
bw.xsi.enable = 1)
Applications->Broadsoft
XSI->XSI Account- Yealink IP Phones BroadSoft UC-One
/
>Password (if bw.enable =1 Environment Guide
and bw.xsi.enable = 1)
Applications->Broadsoft
XSI->XSI Account->Host Yealink IP Phones BroadSoft UC-One
/
Server (if bw.enable =1 and Environment Guide
bw.xsi.enable = 1)
Applications->Broadsoft
XSI->XSI Account->XSI Yealink IP Phones BroadSoft UC-One
/
Server Type (if bw.enable Environment Guide
=1 and bw.xsi.enable = 1)
Applications->Broadsoft
XSI->XSI Account->Port (if Yealink IP Phones BroadSoft UC-One
/
bw.enable =1 and Environment Guide
bw.xsi.enable = 1)

/ /
 Yealink IP Phones BroadSoft UC-One
/ /
Environment Guide

Applications->Broadsoft
XSI->Network Directory-
Yealink IP Phones BroadSoft UC-One
>Group (if bw.enable =1, /
Environment Guide
bw.xsi.enable = 1 and
bw.xsi.directory.enable
Applications->Broadsoft = 1)
XSI->Network Directory-
Yealink IP Phones BroadSoft UC-One
>Personal (if bw.enable =1, /
Environment Guide
bw.xsi.enable = 1 and
Applications->Broadsoft
bw.xsi.directory.enable = 1)
XSI->Network Directory-
>Group Common (if Yealink IP Phones BroadSoft UC-One
/
bw.enable =1, bw.xsi.enable Environment Guide
= 1 and
Applications->Broadsoft
bw.xsi.directory.enable = 1)
XSI->Network Directory-
Yealink IP Phones BroadSoft UC-One
>Enterprise (if bw.enable /
Environment Guide
=1, bw.xsi.enable = 1 and
Applications->Broadsoft
bw.xsi.directory.enable = 1)
XSI->Network Directory-
>Enterprise Common (iif Yealink IP Phones BroadSoft UC-One
/
bw.enable =1, bw.xsi.enable Environment Guide
= 1 and
Applications->Broadsoft
bw.xsi.directory.enable = 1)
XSI->Network Directory-
Yealink IP Phones BroadSoft UC-One
>Group (if bw.enable =1, /
Environment Guide
bw.xsi.enable = 1 and
bw.xsi.directory.enable
Applications->Broadsoft = 1)
XSI->Network Directory-
Yealink IP Phones BroadSoft UC-One
>Enterprise (if bw.enable /
Environment Guide
=1, bw.xsi.enable = 1 and
bw.xsi.directory.enable = 1)
Applications->Broadsoft
XSI->Network Directory-
Yealink IP Phones BroadSoft UC-One
>Personal (if bw.enable =1, /
Environment Guide
bw.xsi.enable = 1 and
Applications->Broadsoft
bw.xsi.directory.enable = 1)
XSI->Network Directory-
>Enterprise Common (iif Yealink IP Phones BroadSoft UC-One
/
bw.enable =1, bw.xsi.enable Environment Guide
= 1 and
Applications->Broadsoft
bw.xsi.directory.enable
XSI->Network = 1)
Directory-
>Group Common (if Yealink IP Phones BroadSoft UC-One
/
bw.enable =1, bw.xsi.enable Environment Guide
= 1 and
Applications->Broadsoft
bw.xsi.directory.enable
XSI->Network = 1)
Directory-
>Enable Custom Directory Yealink IP Phones BroadSoft UC-One
/
(if bw.enable =1, Environment Guide
bw.xsi.enable = 1 and
bw.xsi.directory.enable = 1)
Yealink IP Phones BroadSoft UC-One
/ /
Environment Guide

Applications->Broadsoft
XSI->Network Directory-
Yealink IP Phones BroadSoft UC-One
>Enable Custom Directory
Environment Guide
(if bw.enable =1 and
bw.xsi.enable = 1)

Features->Call Pickup->Call Yealink IP Phones BroadSoft UC-One

/
Park Mode Environment Guide

Features->Call Pickup->Call Yealink IP Phones BroadSoft UC-One

/
Park Environment Guide
 Features->Call Pickup- Yealink IP Phones BroadSoft UC-One
/
>Group Call Park Environment Guide

Features->Call Pickup-
Yealink IP Phones BroadSoft UC-One
>Audio Alert for Parked /
Environment Guide
Call

Features->Call Pickup-
Yealink IP Phones BroadSoft UC-One
>Visual Alert for Parked /
Environment Guide
Call

Features->Call Pickup->Call Yealink IP Phones BroadSoft UC-One

/
Park Environment Guide

Features->Call Pickup- Yealink IP Phones BroadSoft UC-One

/
>Group Call Park Environment Guide

1变革:
Features->Call Pickup-
rieve在提示开启 Yealink IP Phones BroadSoft UC-One
/
情况下才会出现 >Park Retrieve Environment Guide

Yealink IP DECT Phones Administrator Guide

Features->Call Pickup->Call
/ Yealink IP Phones BroadSoft UC-One
Park Mode
Environment Guide

Yealink IP DECT Phones Administrator Guide

Features->Call Pickup->Call
/ Yealink IP Phones BroadSoft UC-One
Park
Environment Guide

Yealink IP DECT Phones Administrator Guide

Features->Call Pickup->Call
/ Yealink IP Phones BroadSoft UC-One
Park Code
Environment Guide

Yealink IP DECT Phones Administrator Guide

Features->Call Pickup-
/ Yealink IP Phones BroadSoft UC-One
>Park Retrieve Code
Environment Guide

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>DTMF Type

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>DTMF Info Type

Account->Advanced-
>DTMF Payload / Yealink IP DECT Phones Administrator Guide
Type(96~127)

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Conference Type

Account->Advanced-
/ Yealink IP DECT Phones Administrator Guide
>Conference URI

Account->Codec / Yealink IP DECT Phones Administrator Guide

Account->Codec / Yealink IP DECT Phones Administrator Guide

Account->Codec / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Account->Codec->Audio
Yealink IP DECT Phones Administrator Guide
Codec

Account->Codec->Audio
Yealink IP DECT Phones Administrator Guide
Codec

Account->Codec->Audio
Yealink IP DECT Phones Administrator Guide
Codec

Features->Forward&DND- OK->Call Features->Do Not Disturb-

Yealink IP DECT Phones Administrator Guide
>DND->DND Status >LineX->Status

Features->Forward&DND-
/ Yealink IP DECT Phones Administrator Guide
>DND->On Code

Features->Forward&DND-
/ Yealink IP DECT Phones Administrator Guide
>DND->Off Code

Features->Forward&DND- OK->Call Features->Call Forward-

>Forward->Always >LineX->Always(Disabled/Enabled)- Yealink IP DECT Phones Administrator Guide
Forward->On/Off >Status

Features->Forward&DND-
OK->Call Features->Call Forward-
>Forward->Always Yealink IP DECT Phones Administrator Guide
>LineX->Always(Enabled)->Target
Forward->Target

Features->Forward&DND-
>Forward->Always / Yealink IP DECT Phones Administrator Guide
Forward->Off Code

Features->Forward&DND-
>Forward->Always / Yealink IP DECT Phones Administrator Guide
Forward->On Code

Features->Forward&DND- OK->Call Features->Call Forward-

>Forward->Busy Forward- >LineX->Busy(Disabled/Enabled)- Yealink IP DECT Phones Administrator Guide
>On/Off >Status

Features->Forward&DND-
OK->Call Features->Call Forward-
>Forward->Busy Forward- Yealink IP DECT Phones Administrator Guide
>LineX->Busy(Enabled)->Target
>Target

Features->Forward&DND-
>Forward->No Answer / Yealink IP DECT Phones Administrator Guide
Forward->Off Code
Features->Forward&DND-
>Forward->No Answer / Yealink IP DECT Phones Administrator Guide
Forward->On Code

Features->Forward&DND- OK->Call Features->Call Forward-

>Forward->No Answer >LineX->No Yealink IP DECT Phones Administrator Guide
Forward->On/Off Answer(Disabled/Enabled)->Status

Features->Forward&DND-
OK->Call Features->Call Forward-
>Forward->No Answer Yealink IP DECT Phones Administrator Guide
>LineX->No Answer(Enabled)->Target
Forward->Target

Features->Forward&DND-
OK->Call Features->Call Forward-
>Forward->No Answer
>LineX->No Answer(Enabled)->After Yealink IP DECT Phones Administrator Guide
Forward->After Ring
Ring Time
Time(0~120s)

Features->Forward&DND-
>Forward->No Answer / Yealink IP DECT Phones Administrator Guide
Forward ->Off Code

Features->Forward&DND-
>Forward->No Answer / Yealink IP DECT Phones Administrator Guide
Forward->On Code

/ /

/ / Yealink IP DECT Phones Administrator Guide

Account->Advanced-
>Number of simultaneous / Yealink IP DECT Phones Administrator Guide
outgoing calls
 Description of Configuration Parameters i
Y: All handsets support N(): Only handset in bracket support
The name of the Common CFG file for base station is y000000000025.cfg
The name of handset is W56H and W52H

Permitted
Function Parameter W52H/W56H
Value

String within 99
Hostname static.network.dhcp_host_name Y
characters

IPv4 static.network.static_dns_enable Y 0 or 1

static.network.dns.ttl_enable Y 0 or 1

Network_Advanced static.network.dhcp.server_mac1 Y MAC Address

static.network.dhcp.server_mac2 Y MAC Address

static.network.vlan.internet_port_enable Y 0 or 1

Integer from 1 to
static.network.vlan.internet_port_vid Y
4094

Integer from 0 to
static.network.vlan.internet_port_priority Y
7
VLAN

static.network.vlan.dhcp_enable Y 0 or 1

Integer from 1 to
static.network.vlan.dhcp_option Y
255

static.network.vlan.vlan_change.enable Y 0 or 1

static.wui.https_enable Y 0 or 1

WEB HTTP(S)
 static.wui.http_enable Y 0 or 1

Integer from 1 to
WEB HTTP(S) static.network.port.http Y
65535

Integer from 1 to
static.network.port.https Y
65535

wui.quick_login Y 0 or 1

Integer from 1 to
static.network.port.max_rtpport Y
65535

RTP Port
Integer from 1 to
static.network.port.min_rtpport Y
65535

Integer from 0 to
static.network.qos.rtptos Y
63
Qos

Integer from 0 to
static.network.qos.signaltos Y
63

network.static_nat.enable Y 0 or 1

network.static_nat.addr Y IP address

sip.nat_stun.enable Y 0 or 1

Integer from
sip.nat_stun.port Y
1024 to 65000

IP address or
sip.nat_stun.server Y
domain name

NAT&ICE sip.nat_turn.enable Y 0 or 1

IP address or
sip.nat_turn.server Y
domain name

Integer from 1 to
sip.nat_turn.port Y
65535
 sip.nat_turn.username Y String

sip.nat_turn.password Y String

ice.enable Y 0 or 1

0, 1, 2, 3, 4, 5, 6
static.network.802_1x.mode Y
or 7

static.network.802_1x.eap_fast_provision_
Y 0 or 1
mode

String within 512

static.network.802_1x.anonymous_identity Y
characters

String within 32
802.1X static.network.802_1x.identity Y
characters

String within 32
static.network.802_1x.md5_password Y
characters

URL within 511

static.network.802_1x.root_cert_url Y
characters

URL within 511

static.network.802_1x.client_cert_url Y
characters

static.network.vpn_enable Y 0 or 1

VPN

URL within 511

static.openvpn.url Y
characters

static.network.lldp.enable Y 0 or 1

LLDP

Integer from 1 to
static.network.lldp.packet_interval Y
3600

IP address or
static.syslog.server Y
domain name

static.local_log.enable Y 0 or 1
 Integer from 0 to
static.local_log.level Y
6

Integer from 256

static.local_log.max_file_size Y
to 1024

static.syslog.enable Y 0 or 1

Integer from 1 to
static.syslog.server_port Y
65535

Integer from 0 to
static.syslog.level Y
6

static.syslog.transport_type Y 0, 1 or 2

Syslog static.syslog.prepend_mac_address.enable Y 0 or 1

Integer from 0 or
static.syslog.facility Y
23

static.auto_provision.local_log.backup.ena
Y 0 or 1
ble

static.auto_provision.local_log.backup.pat URL within 1024

Y
h characters

static.auto_provision.local_log.backup.upl Integer from 30

Y
oad_period to 86400

static.auto_provision.local_log.backup.app
Y 0 or 1
end

static.auto_provision.local_log.backup.app
Y 0 or 1
end.limit_mode

static.auto_provision.local_log.backup.app Integer from 200

Y
end.max_file_size to 65535

static.auto_provision.local_log.backup.boo Integer from 1 to

Y
tlog.upload_wait_time 86400

static.auto_provision.repeat.enable Y 0 or 1

AutoP_Repeat
AutoP_Repeat

Integer from 1 to
static.auto_provision.repeat.minutes Y
43200

static.auto_provision.weekly.enable Y 0 or 1

static.auto_provision.weekly_upgrade_inte Integer from 0 to

Y
rval 12

Integer from 0 to
static.auto_provision.inactivity_time_expire Y
120

AutoP_Weekly
0,1,2,3,4,5,6
or a combination
static.auto_provision.weekly.dayofweek Y
of these
digits

Time from 00:00

static.auto_provision.weekly.begin_time Y
to 23:59

Time from 00:00

static.auto_provision.weekly.end_time Y
to 23:59

static.auto_provision.flexible.enable Y 0 or 1

Integer from 1 to
static.auto_provision.flexible.interval Y
1000
AutoP-Flexible
Time from 00:00
static.auto_provision.flexible.begin_time Y
to 23:59

Time from 00:00

static.auto_provision.flexible.end_time Y
to 23:59

URL within 511

static.auto_provision.server.url Y
characters

String within 32
AutoP_URL static.auto_provision.server.username Y
characters

String within 32
static.auto_provision.server.password Y
characters

static.auto_provision.dhcp_option.enable Y 0 or 1

static.auto_provision.dhcp_option.list_user Integer from

Y
_options 128 to 254
AutoP_DHCP
 AutoP_DHCP

static.network.dhcp.option60type Y 0 or 1

static.auto_provision.dhcp_option.option6 String within 99

Y
0_value characters

static.auto_provision.update_file_mode Y 0 or 1

static.auto_provision.encryption.config Y 0 or 1

Autop_Aes Key static.auto_provision.aes_key_in_file Y 0 or 1

static.auto_provision.aes_key_16.com Y 16 characters

static.auto_provision.aes_key_16.mac Y 16 characters

URL within 511

static.configuration.url Y
characters
Custom Configuration

URL within 511

static.custom_mac_cfg.url Y
characters

FTP, TFTP, HTTP

static.auto_provision.server.type Y
or HTTPS

static.auto_provision.dns_resolv_nosys Y 0 or 1

Integer from 1 to
static.auto_provision.dns_resolv_nretry Y
10

Integer from 1 to
static.auto_provision.dns_resolv_timeout Y
60
Autop Provisioning

static.auto_provision.attempt_before_faile Integer from 1 to

Y
d 10

static.auto_provision.retry_delay_after_file_ Integer from 1 to

Y
transfer_failed 300

static.auto_provision.user_agent_mac.enab
Y 0 or 1
le
 static.auto_provision.power_on Y 0 or 1

AutoP_PNP static.auto_provision.pnp_enable Y 0 or 1

Autop_Reboot static.auto_provision.reboot_force.enable Y 0 or 1

static.auto_provision.custom.sync Y 0 or 1

static.auto_provision.custom.sync.path Y URL

Autop_Protect

static.auto_provision.custom.protect Y 0 or 1

static.auto_provision.custom.upload_meth
Y 0 or 1
od

static.auto_provision.attempt_expired_tim Integer from 1 to

Autop_Expired Time Y
e 300

Integer from 1 to
Network_Expired Time static.network.attempt_expired_time Y
300

String within 32
Autop wildcard static.auto_provision.url_wildcard.pn Y
characters

String within 24
static.autoprovision.X.name Y
characters

String within 24
static.autoprovision.X.code Y
characters

URL within 511

static.autoprovision.X.url Y
characters

Autop Code String within 64

static.autoprovision.X.user Y
(X:1-50) characters

String within 32
static.autoprovision.X.password Y
characters

static.autoprovision.X.com_aes Y 16 characters
 static.autoprovision.X.mac_aes Y 16 characters

transfer.semi_attend_tran_enable Y 0 or 1

Transfer transfer.blind_tran_on_hook_enable Y 0 or 1

transfer.on_hook_trans_enable Y 0 or 1

Integer from -33

features.dtmf.volume Y
to 0

features.dtmf.hide Y 0 or 1

Features_DTMF

Integer from 0 to
features.dtmf.duration Y
300

features.dtmf.hide_delay Y 0 or 1

Features_FWD features.fwd_diversion_enable Y 0 or 1

Forward International forward.international.enable Y 0 or 1

English, French,
German, Italian,
Polish,
static.lang.wui Y
Portuguese,
Spanish, Turkish,
Russian
URL within 511
Language wui_lang.url Y
characters

http://localhost/
all or
wui_lang.delete Y
http://localhost/
Y.name.js

String within 16
dialplan.area_code.code Y
characters

Integer from 1 to
dialplan.area_code.min_len Y
15

Integer from 1 to
dialplan.area_code.max_len Y
15
 Integer from 0 to
dialplan.area_code.line_id Y
5

dialplan.block_out.number.X String within 32

Y
(X ranges from 1 to 10) characters

dialplan.block_out.line_id.X Integer from 0 to

Y
(X ranges from 1 to 10) 5

dialplan.dialnow.rule.X String within 511

N(W52H)
(X ranges from 1 to 10) characters

Dialplan
dialplan.dialnow.line_id.X Integer from 0 to
N(W52H)
(X ranges from 1 to 10) 5

dialplan.replace.prefix.X String within 32

Y
(X ranges from 1 to 100) characters

dialplan.replace.replace.X String within 32

Y
(X ranges from 1 to 100) characters

dialplan.replace.line_id.X Integer from 0 to

Y
(X ranges from 1 to 100) 5

Integer from 0 to
phone_setting.dialnow_delay N(W52H)
14

URL within 511

dialplan_dialnow.url N(W52H)
characters

URL within 511

dialplan_replace_rule.url Y
characters

Integer from 0 to
sip.reg_surge_prevention Y
60

sip.send_response_by_request Y 0 or 1

sip.notify_reboot_enable Y 0, 1 or 2

sip.authentication_for_xsi Y 0 or 1

sip.use_23_as_pound Y 0 or 1
 sip.requesturi.e164.addglobalprefix Y 0 or 1

sip.use_out_bound_in_dialog Y 0 or 1

sip.rfc2543_hold Y 0 or 1

SIP
Integer from
sip.listen_port Y
1024 to 65535

Integer from
sip.tls_listen_port Y
1024 to 65535

Float from 0.5 to

sip.timer_t1 Y
10

Float from 2 to
sip.timer_t2 Y
40

Float from 2.5 to

sip.timer_t4 Y
60

sip.disp_incall_to_info Y 0 or 1

String within 256

sip.limit_server_name Y
characters

sip.trust_ctrl Y 0 or 1

Broadsoft_Call Waiting call_waiting.mode Y 0 or 1

call_waiting.enable Y 0 or 1

call_waiting.tone Y 0 or 1

Call Waiting

String within 32
call_waiting.on_code Y
characters

String within 32
call_waiting.off_code Y
characters
 404, 480, 486 or
features.dnd_refuse_code Y
603

features.direct_ip_call_enable Y 0 or 1

404, 480, 486 or

features.normal_refuse_code Y
603

Integer from 1 to
features.relog_offtime Y
1000

features.caller_name_type_on_dialing Y 1, 2 or 3

phone_setting.is_deal180 Y 0 or 1

features.reboot_in_talk_enable Y 0 or 1

Integer from 0 to
phone_setting.ringback_timeout Y
3600
Features_Others

Integer from 0 to
phone_setting.ringing_timeout Y
3600

String within 99
phone_setting.emergency.number Y
characters

features.save_call_history Y 0 or 1

features.cumulative_display_call_log.enabl
Y 0 or 1
e

phone_setting.end_call_on_hook.enable Y 0 or 1

features.voice_mail_tone_enable Y 0 or 1

features.key_as_send Y 0, 1 or 2

String within 99
features.call_num_filter Y
characters
 features.ringer_device.is_use_headset Y 0 or 1

Integer greater
Features_ Audio Settings features.call.dialtone_time_out Y than or equal to
0

features.busy_tone_delay Y 0, 3 or 5

static.managementserver.enable Y 0 or 1

String within 128

static.managementserver.username Y
characters

String within 64
static.managementserver.password Y
characters

URL within 511

static.managementserver.url Y
characters
TR069

static.managementserver.connection_requ String within 128

Y
est_username characters

static.managementserver.connection_requ String within 64

Y
est_password characters

static.managementserver.periodic_inform_
Y 0 or 1
enable

static.managementserver.periodic_inform_ Integer from 5 to

Y
interval 4294967295

Cudatel SLA_Barge-in features.barge_in_via_username.enable Y 0 or 1

URL within 511

Firmware static.firmware.url Y
characters

String within 32
static.security.user_name.user Y
characters

String within 32
static.security.user_name.admin Y
characters

String within 32
static.security.user_name.var Y
characters
 static.phone_setting.reserve_certs_enable Y 0 or 1

String within 32
static.security.user_password Y
characters

Security

static.security.trust_certificates Y 0 or 1

static.security.ca_cert Y 0, 1 or 2

static.security.dev_cert Y 0 or 1

static.security.cn_validation Y 0 or 1

Integer from
base.pin_code Y
0000 to 9999

static.security.var_enable Y 0 or 1

URL within 511

3-level Permissions static.web_item_level.url Y
characters

static.security.default_access_level Y 0, 1 or 2

URL within 511

static.trusted_certificates.url Y
characters

Trusted Certificates

http://localhost/
static.trusted_certificates.delete Y
all

URL within 511

static.server_certificates.url Y
characters
Server Certificates

static.server_certificates.delete Y http://localhost/all

static.features.custom_factory_config.enab
Y 0 or 1
le
Custom Factory Configuration

URL within 511

static.custom_factory_configuration.url Y
characters
 URL within 511
Blacklist blacklist.url Y
characters

voice.vad Y 0 or 1

Echo Cancellation

voice.cng Y 0 or 1

voice.jib.adaptive Y 0 or 1

Integer from 0 to
voice.jib.min Y
400

Jitter Buffer Custom,

Australia,
Integer from Austria,
0 to
voice.jib.max Y Brazil,400
Belgium,
China, Czech,
Denmark,
Finland,
Integer fromFrance,
0 to
voice.jib.normal Y Germany,400 Great
Britain, Greece,
Hungary,
Lithuania, India,
voice.tone.country Y Italy, Japan,
Mexico, New
Zealand,
Netherlands,
voice.tone.dial Y Norway,
String
Portugal, Spain,
Switzerland,
Sweden, Russia,
Tones voice.tone.ring Y United States,
String
Chile or Czech
ETSI

voice.tone.busy Y String

voice.tone.callwaiting Y String

Handset Restriction phone_setting.max_number_of_handset Y 1, 2, 3, 4 or 5

phone_setting.called_party_info_display.en
N(W52H) 0 or 1
able
Call Display

phone_setting.call_info_display_method Y 0, 1, 2, 3 or 4

phone_setting.common_power_led_enable N(W52H) 0 or 1
 phone_setting.ring_power_led_flash_enabl N(W52H) 0 or 1
e

phone_setting.mail_power_led_flash_enabl
N(W52H) 0 or 1
e

LED
phone_setting.missed_call_power_led_flas
N(W52H) 0 or 1
h.enable

custom.handset.voice_mail_notify_light.en
N(W56H) 0 or 1
able

features.registered_power_led_flash.enabl
Y 0 or 1
e

URL within 511

remote_phonebook.data.X.url Y
characters

String within 99
remote_phonebook.display_name Y
characters

Remote Phonebook String within 99

remote_phonebook.data.X.name Y
(X ranges from 1 to 5.) characters

features.remote_phonebook.enable Y 0 or 1

0, Integer from
features.remote_phonebook.flash_time Y
3600 to 1296000

ldap.enable Y 0 or 1

String within 99
ldap.name_filter Y
characters

String within 99
ldap.number_filter Y
characters

IP address or
ldap.host Y
domain name

Integer from 1 to
ldap.port Y
65535

String within 99
ldap.base Y
characters
 String within 99
ldap.user Y
characters

String within 99
ldap.password Y
characters

Integer from 1 to
ldap.max_hits Y
32000
LDAP
String within 99
ldap.name_attr Y
characters

String within 99
ldap.numb_attr Y
characters

String within 99
ldap.display_name Y
characters

ldap.version Y 2 or 3

ldap.call_in_lookup Y 0 or 1

ldap.ldap_sort Y 0 or 1

ldap.tls_mode Y 0, 1 or 2

ldap.call_out_lookup Y 0 or 1

ldap.incoming_call_special_search.enable Y 0 or 1

voice.rtcp.enable Y 0 or 1

voice.rtcp_cname Y String

RTCP-XR
Integer more
voice.rtcp_intval Y than or equal to
0

voice.rtcp_xr.enable Y 0 or 1
 phone_setting.vq_rtcpxr.session_report.en
Y 0 or 1
able

phone_setting.vq_rtcpxr.states_show_on_w
Y 0 or 1
eb.enable

phone_setting.vq_rtcpxr.interval_report.en
Y 0 or 1
able

Integer from 5 to
phone_setting.vq_rtcpxr_interval_period Y
20

VQ-RTCPXR
phone_setting.vq_rtcpxr_moslq_threshold_
Y 15 to 40
warning

phone_setting.vq_rtcpxr_moslq_threshold_
Y 15 to 40
critical

phone_setting.vq_rtcpxr_delay_threshold_
Y 10 to 2000
warning

phone_setting.vq_rtcpxr_delay_threshold_
Y 10 to 2000
critical

dns_cache_a.X.name Y Domain name

dns_cache_a.X.ip Y IP address

Integer from 30
dns_cache_a.X.ttl Y
to 2147483647

dns_cache_srv.X.name Y Domain name

Integer from 0 to
dns_cache_srv.X.port Y
65535

Integer from 0 to
dns_cache_srv.X.priority Y
65535

dns_cache_srv.X.target Y Domain name

Integer from 0 to
dns_cache_srv.X.weight Y
65535
Static DNS Cache
(X ranges from 1 to 12)
 Static DNS Cache
(X ranges from 1 to 12)
Integer from 30
dns_cache_srv.X.ttl Y
to 2147483647

dns_cache_naptr.X.name Y Domain name

dns_cache_naptr.X.flags Y S, A, U or P

Integer from 0 to
dns_cache_naptr.X.order Y
65535

Integer from 0 to
dns_cache_naptr.X.preference Y
65535

dns_cache_naptr.X.replace Y Domain name

String within 32
dns_cache_naptr.X.service Y
characters

Integer from 30
dns_cache_naptr.X.ttl Y
to 2147483647

Cudatel SLA_Barge-in features.barge_in_via_username.enable Y 0 or 1

Intercom features.intercom.headset_prior.enable Y 0 or 1

super_search.recent_call N (W52H) 0 or 1

Super_search

URL within 511

super_search.url N (W52H)
characters

Integer from 1 to
Input Method directory.search_default_input_method Y
12

URL within 511

handset.X.contact_list.url Y
characters

Integer from 1 to
handset.X.incoming_lines Y
5

Handset Settings Integer from 1 to

handset.X.dial_out_lines Y
(X ranges from 1 to 5.) 5
 Handset Settings
(X ranges from 1 to 5.)

Integer from 1 to
handset.X.dial_out_default_line Y
5

String within 24
handset.X.name Y
characters

within 511
over_the_air.url Y
characters

within 511
over_the_air.url.w52h Y
characters

within 511
over_the_air.url.w56h Y
characters

Upgrade Method

over_the_air.handset_trigger Y 0 or 1

over_the_air.base_trigger Y 0 or 1

over_the_air.handset_tip Y 0 or 1

auto_provision.handset_configured.enable Y 0 or 1

custom.handset.auto_intercom Y 0, 1 or 2

custom.handset.screen_saver.enable Y 0 or 1

custom.handset.color_scheme N(W56H) 0 or 1

Integer from 1 to
custom.handset.wallpaper N(W52H)
5

custom.handset.backlight_in_charger.enab
Y 0 or 1
le

custom.handset.backlight_out_of_charger.
Y 0 or 1
enable

custom.handset.keypad_light.enable N(W52H) 0 or 1

Custom Handset Setting

 custom.handset.keypad_tone.enable Y 0 or 1

Custom Handset Setting

custom.handset.confirmation_tone.enable Y 0 or 1

custom.handset.low_battery_tone.enable Y 0 or 1

custom.handset.auto_answer.enable Y 0 or 1

For W56H:
Integer from 0 to
9
custom.handset.language Y
For W52H:
Integer from 0 to
11

custom.handset.time_format Y 0 or 1

custom.handset.date_format Y 0, 1, 2, 3, 4, 5 or 6

custom.handset.voice_mail_notify_light.en
N(W56H) 0 or 1
able

custom.handset.missed_call_notify_light.e
N(W56H) 0 or 1
nable

custom.handset.eco_mode.enable Y 0 or 1

base.eco_mode.enable Y 0 or 1

Base Settings

base.repeater_mode.enable Y 0 or 1

web_setting.picture.url URL within 511

Y
(File Format: .tar) characters

http://localhost/
web_setting.picture.delete Y
all

web_setting.color.url URL within 511

Y
(File Format:.cfg) characters
Web Setting

URL within 511

web_setting.logo_link Y
characters
 Web Setting

URL within 511

web_setting.title Y
characters

URL within 511

web_setting.model_name Y
characters

dialplan.emergency.asserted_id_source Y ELIN or CUSTOM

10-25 digits, SIP

dialplan.emergency.custom_asserted_id Y
URI, or TEL URI

dialplan.emergency.server.X.address IP address or
Y
(X ranges from 1 to 3) domain name

dialplan.emergency.server.X.port Integer from 1 to

Emergency Dialplan Y
(X ranges from 1 to 3) 65535

dialplan.emergency.server.X.transport_typ
e Y 0, 1, 2 or 3
(X ranges from 1 to 3)

dialplan.emergency.X.value number or SIP

Y
(X ranges from 1 to 255) URI

dialplan.emergency.X.server_priority a combination of
Y
(X ranges from 1 to 255) digits 1, 2 and 3

PCMU,
PCMA,
multicast.codec Y
G729,
G722

multicast.receive_priority.enable Y 0 or 1

Integer from 0 to
multicast.receive_priority.priority Y
31

String within 99
multicast.listen_address.X.label Y
characters

Integer from 0 to
multicast.paging_address.X.channel Y
30

Multicast
multicast.listen_address.X.ip_address Y IP address: port
(X ranges from 1 to 31.)

multicast.paging_address.X.ip_address Y String
 multicast.paging_address.X.label Y String

Integer from 0 to
multicast.listen_address.X.channel Y
30

Integer from 0 to
multicast.listen_address.X.volume Y
15

multicast.receive.use_speaker Y 0 or 1

Watch_dog static.watch_dog.enable Y 0 or 1
figuration Parameters in Common.cfg File

Default Value Description Reboot

It configures the DHCP option 12 hostname on the IP

DECT phone.
W52P Y

It triggers the static DNS feature to on or off.

0 Y
0-Off

1-On
It enables or disables the phone to use TTL (Time To Live)
in the A record.
1 Y
If it is set to 0 (Off), the IP DECT phone will use the IPv4
DNS obtained from DHCP.
0-Disabled
It configures the MAC address 1 that the IP DECT phone
If it is
toset
1-Enabled
use to 1 (On), the
authenticate the IP DECT
DHCP phoneIf will
server. the use manually
Blank configured static IPv4 DNS. the phone will use the IP Y
authentication is successful,
address offered by this server.
Note: It works
It configures only
the MACif the value2ofthat
address thethe
parameter
IP DECT phone
“static.network.internet_port.type
Example: ”
use to authenticate the DHCP server. If theis set to 0 (DHCP).
Blank static.network.dhcp.server_mac1= 64:70:02:9E:D6:92 Y
authentication is successful, the phone will use the IP
address offered by this server.
Note: It has a higher priority than the value defined by
It enables or disables the VLAN for the Internet port.
the paramter "static.network.dhcp.server_mac2".
Example:
0 static.network.dhcp.server_mac2= 64:70:02:9E:D6:92 Y
0-Disabled

Note: If both the MAC address1 and MAC address 2 fail

1-Enabled
It configures the VLAN ID for the Internet port.
to authenticate, the phone use the IP address offered by
1 other DHCP servers in the network. Y

It configures the VLAN priority for the Internet (WAN)

port.
0 Y
7 is the highest priority, 0 is the lowest priority.
It enables or disables the DHCP VLAN discovery feature
on the IP DECT phone.
1 Y
0-Disabled
It configures the DHCP option from which the IP DECT
1-Enabled
phone will obtain the VLAN settings.
132 Y
You can configure at most five DHCP options and
separate them by commas.
It enables or disables the IP DECT phone to obtain VLAN
ID using lower preference of VLAN assignment method
0 Y
or disable the VLAN feature when the IP DECT phone
cannot obtain VLAN ID using the current VLAN
assignment
It enables ormethod.
disables the user to access the web user
interface of the IP DECT phone using the HTTPS protocol.
1 Y
0-Disabled
0-Disabled
1-Enabled
1-Enabled
The priority of each method is:
LLDP/CDP>Manual>DHCP VLAN.
If it is set to 1 (Enabled), the IP DECT phone will attempt
to use the lower priority of VLAN assignment method
when failing to obtain the VLAN ID using higher priority
of VLAN assignment method. If all the methods are
 It enables or disables the user to access the web user
interface of the IP DECT phone using the HTTP protocol.
1 Y
0-Disabled
It configures the HTTP port for the user to access the
1-Enabled
web user interface of the IP DECT phone using the HTTP
80 Y
protocol.

It configures the HTTPS port for the user to access the

web user interface of the IP DECT phone using the HTTPS
443 Y
protocol.

It enables or disables the quick login feature.

0 N
0-Disabled

1-Enabled
It configures the maximum local RTP port.
12780 Y
If it is set
Note: Thetovalue
1 (Enabled), you can quickly
of the maximum local RTPlogport
intocannot
the web
user
be lessinterface using
than that a request
of the URI local
minimum (e.g., RTP port.
https://admin:[email protected]).
It configures the minimum local RTP port.
11780 Note: It works only if the value of the parameter Y
“static.wui.https_enable” is set to 1 (Enabled).
It configures the DSCP (Differentiated Services Code
Point) for voice packets.
46 Y
The default DSCP value for RTP packets is 46 (Expedited
Forwarding).
It configures the DSCP (Differentiated Services Code
Point) for SIP packets.
26 Y
The default DSCP value for SIP packets is 26 (Assured
Forwarding).
It enables or disables the manual NAT feature on the IP
DECT phone.
0 Y
0-Disabled
It configures the IP address to be advertised in SIP
1-Enabled
signaling.
Blank Y
It should match the external IP address used by the NAT
device.
It enables or disables the STUN (Simple Traversal of UDP
Example:
over NATs) feature on the IP DECT phone.
0 Y
network.static_nat.addr = 172.16.1.1
0-Disabled
Note:
It It worksthe
configures only if the
port value
of the STUNof the parameter
(Simple Traversal of
“network.static_nat.enable”
1-Enabled
UDP over NATs) server. is set to 1 (Enabled).
3478 Y
Example:
sip.nat_stun.port = 3478
It configures the IP address or domain name of the STUN
(Simple Traversal of UDP over NATs) server.
Blank Note: It works only if the value of the parameter Y
“sip.nat_stun.enable”
It enables or disables isthe
Example: setTURN
to 1 (Enabled).
(Traversal Using Relays
sip.nat_stun.server = 218.107.220.201
around NAT) feature on the IP DECT phone.
0 Note: It works only if the value of the parameter Y
0-Disabled
“sip.nat_stun.enable” is set to 1 (Enabled).
1-Enabled
It configures the IP address or the domain name of the
TURN (Traversal Using Relays around NAT) server.
Blank Y
Example:
sip.nat_turn.server
It = 218.107.220.202
configures the port of the TURN (Traversal Using
Relays around NAT) server.
3478 Note: It works only if the value of the parameter Y
“sip.nat_turn.enable” is set to 1 (Enabled).
Example:
sip.nat_turn.port = 3478

Note: It works only if the value of the parameter

“sip.nat_turn.enable” is set to 1 (Enabled).
 It configures the user name to authenticate to TURN
(Traversal Using Relays around NAT) server.
Blank Y
Example:
sip.nat_turn.username = admin
It configures the password to authenticate to the TURN
(Traversal Using Relays around NAT) server.
Blank Y
Note: It works only if the value of the parameter
“sip.nat_turn.enable”
enables or disablesisthe
Example:
It setICE
to (Interactive
1 (Enabled).Connectivity
sip.nat_turn.password
Establishment) feature=on yealink1105
the IP DECT phone.
0 Note: It works only if the value of the parameter Y
0-Disabled
“sip.nat_turn.enable” is set to 1 (Enabled).
1-Enabled
It configures the 802.1x authentication method.
0 Y
0-Disabled

1-EAP-MD5
It configures the EAP In-Band provisioning method for
EAP-FAST.
0 Y
2-EAP-TLS
0-Unauthenticated Provisioning
3-EAP-PEAP/MSCHAPv2
It configures the anonymous identity (user name) for
1-Authenticated
802.1X Provisioning
authentication.
Blank 4-EAP-TTLS/EAP-MSCHAPv2 Y
It is used for constructing a secure tunnel for 802.1X
If it is set to 0 (Unauthenticated Provisioning), EAP In-
authentication.
5-EAP-PEAP/GTC
Band provisioning is enabled by802.1x
serverauthentication.
unauthenticated
It configures the user name for
PAC (Protected Access Credential) provisioning using
Example:
Blank 6-EAP-TTLS/EAP-GTC
anonymous Diffie-Hellman key exchange. = Y
static.network.802_1x.anonymous_identity
Example:
[email protected]
static.network.802_1x.identity = yealink
7-EAP-FAST
If
It it is set to 1the
configures (Authenticated
password forProvisioning), EAP In-Band
802.1x authentication.
provisioning
Note: It worksis only
enabled
if thebyvalue
server
of authenticated
the parameterPAC
Blank If it is set to 0using
provisioning (EAP-None), 802.1x
certificate basedauthentication
server is not Y
“static.network.802_1x.mode”
Example: is set to 2, 2,
1, 3, 3,
4, 4,
5, 5,
6 or 7. 7.
6 or
required.
authentication.
static.network.802_1x.md5_password = admin123
It configures the access URL of the CA certificate.
Note: It works only if the value of the parameter
Blank “static.network.802_1x.mode” 7 (EAP-FAST).
is set to 1, 3, 4, 5, 6 or 7. N
Example:
static.network.802_1x.root_cert_url =
http://192.168.1.10/ca.pem
It configures the access URL of the device certificate.
Blank Note: It works only if the value of the parameter N
Example:
“static.network.802_1x.mode” is set to
static.network.802_1x.client_cert_url = 2, 3, 4, 5, 6 or 7. If
the authentication method
http://192.168.1.10/client.pem is EAP-FAST,
It enables or disables the OpenVPN feature you on
alsothe
need
IP to
set the value
DECT phone. of the parameter
0 “static.network.802_1x.eap_fast_provision_mode”
Note: It works only if the value of the parameter to 1 Y
(Authenticated Provisioning). The
“static.network.802_1x.mode”
0-Disabled is setformat of the CA The
to 2 (EAP-TLS).
certificate
format of must
the be *.pem,
device *.crt, *.cer
certificate must or
be*.der.
*.pem.
It configures the access URL of the *.tar file for
1-Enabled
OpenVPN.
Blank N
Example:
static.openvpn.url = http://192.168.10.25/OpenVPN.tar
It enables or disables the LLDP (Linker Layer Discovery
Protocol) feature on the IP DECT phone.
1 Y
0-Disabled
It configures the interval (in seconds) for the IP DECT
1-Enabled
phone to send the LLDP (Linker Layer Discovery Protocol)
60 Y
request.
If it is set to 1 (Enabled), the IP DECT phone will attempt
to
It determine
Note: It works
configures itsonly
the VLAN ID through
if the
IP address value LLDP.
of the
or domain parameter
name of the
“static.network.lldp.enable”
syslog server when exporting log to 1the
is set to (Enabled).
syslog server.
Blank N
Example:
static.syslog.server = 192.168.1.100
It enables or disables the IP DECT phone to record log
locally.
1 N
0-Disabled

1-Enabled

If it is set to 0 (Disabled), the IP DECT phone will stop

recording log to the log files (<MAC>-boot.log and
<MAC>-sys.log) locally. The log files recorded before are
 It configures the lowest level of local log information to
be rendered to the <MAC>-sys.log file.
3 N
When you choose a log level, you are including all events
of an equal or higher severity level and excluding events
of a lower severity
It configures level. Thesize
the maximum logging level
(in KB) youlog
of the choose
files
determines the lowest
(<MAC>-boot.log and severity of eventscan
<MAC>-sys.log) to log.
be stored on
256 N
the IP DECT phone.
0-system is unusable
When
It this or
enables size is about
disables toIPbeDECT
the exceeded,
phone to upload log
1-action
(1) If the must
messages local besyslog
log
to the taken immediately
files are configured
server to be uploaded to
in real time.
0 N
the server by the parameter
2-critical condition
“static.auto_provision.local_log.backup.enable”,
0-Disabled the IP
DECT
It phone will
configures the clear
port of allthe
thesyslog
local log files on the phone
server.
3-error
once conditionsbacking up.
successfully
1-Enabled
514 N
Example:
4-warning conditions
(2) If the value of the parameter
static.syslog.server_port = 515
“static.auto_provision.local_log.backup.enable”
It configures the lowest level of syslog information is setthat
to 0
5-normal but
(Disabled), thesignificant
IP DECT condition
phone will erase half of the logs
displays in the syslog.
3 from the oldest log information on the phone. N
6-informational
When you choose a log level, you are including all events
Example:
of an equal orthehigher severity level and
It configures transport protocol thatexcluding
the IP DECT events
static.local_log.max_file_size
of a lower = 1024 level you choose
phone usesseverity level. The log
when exporting logging
messages to the syslog
0 N
determines the lowest severity of events to log.
server.

0-Emergency:
0-UDP
It system the
enables or disables is unusable
IP DECT phone to prepend the
MAC address to the log messages exported to the syslog
0 1-Alert: action must be taken immediately N
1-TCP
server.

2-Critical:
2-TLS
0-Disabled
It critical
configures conditions
the facility that generates the log messages.
16 3-Critical: error conditions N
1-Enabled
0-kernel messages

4-Warning:
1-user-level warning conditions
It enables or messages
disables the IP DECT phone to upload the
local log files (<MAC>-boot.log and <MAC>-sys.log) to
0 5-Warning: normal but significant condition N
2-mail
the system
provisioning server or a specific server.
6-Informational:
3-system daemons informational messages
0-Disabled
It configures the upload path of the local log files
(<MAC>-boot.log and <MAC>-sys.log).
Blank 4-security/authorization messages (note 1) N
1-Enabled
If you leave it blank, the IP DECT phone will upload the
5-messages
If
local
It it islog
configures to 1generated
set files (Enabled),
to
the the internally
theseconds)
provisioning
period (in by
IP phone syslogd
ofwill
server. theupload thefiles
local log
local log files to the provisioning
(<MAC>-boot.log and <MAC>-sys.log) uploads to the server or the specific
30 6-line
server printer subsystem
to backserver upa these N
If you configure
provisioning or a files
relative URLwhen
specific one
(e.g., of the following
/upload),
server. the IP DECT
happens:
phone will upload the local log files by extracting the
-7-network
root Auto
Example:
It directory
configures
news
provisioning
fromsubsystem
whether is the
the triggered;
access
local URL of the
log files provisioning
(<MAC>-
-boot.log
The
server. size of the local log files reaches
static.auto_provision.local_log.backup.upload_period
and <MAC>-sys.log) maximum server
on the provisioning =
1 8-UUCP
configured subsystem N
or a specificby
60 the parameter
server are overwritten or appended.
“static.local_log.max_file_size”;
If you configure an absolute URL with protocol (e.g., tftp),
-9-clock
the It daemon
It’sIPtime
DECT to phone
upload (note 2)
iflocal
will log files
upload according to the
Note:
0-Overwrite
It configures works the only
behaviorthe whenthe
value local
oflocal
the log
parameter
log files
files using
(<MAC>-
upload
the desiredperiod configured
protocol. If no by the
protocol,
“static.auto_provision.local_log.backup.enable” parameter
the IP DECT isphone
set to 1
boot.log and <MAC>-sys.log) on the provisioning server
0 10-security/authorization
use
(Enabled). the same protocol messages
“static.auto_provision.local_log.backup.upload_period”.
will with auto (note 1)
provisioning for N
1-Append
or a specific (not applicable
server reach the to TFTP
maximumServer) size.
uploading files.
11-FTPThe
Note: daemon
upload path is configured by the parameter
0-Append
It configures Delete
the maximum size (in KB) of the local log
“static.auto_provision.local_log.backup.path”.
Example:
files
12-NTP (<MAC>-boot.log
subsystem and <MAC>-sys.log) can be
1024 static.auto_provision.local_log.backup.path = N
1-Append
stored on theStopprovisioning server or a specific server.
tftp://10.3.6.133/upload/
13-log audit (note 1)
If it is set to 1the
Example:
It configures (Append
waitingDelete),
time (inthe IP DECTbefore
seconds) phonethe will
Note:
delete Ittheworks
old onlyand
log if the value
start over.of the parameter
static.auto_provision.local_log.backup.append.max_file_si
phone
14-log uploads
alert (note the1)local log file (<MAC>-boot.log) to
120 “static.auto_provision.local_log.backup.enable” is set to 1 N
ze =provisioning
the 1025 server or a specific server after startup.
(Enabled).
If it is set to 2 (Append Stop), the IP DECT phone will
15-clock daemon (note 2)
stop
Example:
It uploading
triggers log.
the repeatedly feature to on or off.
static.auto_provision.local_log.backup.bootlog.upload_wa
16-local use 0 (local0)
0 N
it_time
0-Off = 121
17-local use 1 (local1)
1-On
18-local use 2 (local2)
If it is set to 1 (On), the IP DECT phone will perform an
auto
19-local provisioning
use 3 (local3)process repeatedly.

20-local use 4 (local4)

 It configures the interval (in minutes) for the IP DECT
phone to perform an auto provisioning process
1440 N
repeatedly.

Note: It works
It triggers only if feature
the weekly the value
to of
onthe parameter
or off.
“static.auto_provision.repeat.enable” is set to 1 (On).
0 N
0-Off

1-On
It configures the period for the IP DECT phone to
perform an auto provisioning.
1 N
If it is set to 1 (On), the IP DECT phone will perform an
auto
If it isprovisioning
set to 0, the process
IP DECT weekly.
phone will perform an auto
provisioning
It configures process
the delayduring time (intheminutes)
specifiedtotime period
perform an
(configured
auto by theprocess
provisioning parameters when the IP DECT phone is
0 N
“static.auto_provision.weekly.begin_time”
inactive at regular week. and
“static.auto_provision.weekly.end_time”) of the day(s)
(configured
If
It it is set to by
configures 0,thethe
the parameter
IP
days phone
of thewill
week perform
for thean IP auto
DECT phone
static.auto_provision.weekly.dayofweek)
provisioning
to perform anprocess at random during
auto provisioning processthe everytime
weekly. week.
period
0123456 N
(configured by the parametera
If it is set to to other values (e.g., 2), the IPand
“static.auto_provision.weekly.begin_time”
0-Sunday DECT phone
will perform an auto provisioning
“static.auto_provision.weekly.end_time”). process
It configures the begin time of the day for the IP DECT during the
specified
1-Monday
phone to time
perform period (configured
an auto by theprocess
provisioning parametersweekly.
00:00 “static.auto_provision.weekly.begin_time”
If it is set to other values (e.g., 60), the IP phone and will N
“static.auto_provision.weekly.end_time”)
perform
2-Tuesday an auto provisioning process
Note: It works only if the value of the parameter onlyat awhen
random day
the IP
of the
phone specified
has been day(s) (configured
inactivated
“static.auto_provision.weekly.enable” for 60 by the
minutes
is set parameter
(1 hour)
It configures the end time of the day for thetoIP1 DECT
(On).
static.auto_provision.weekly.dayofweek)
during
3-Wednesdaytheperform
time period (configured by the every 2 weeks.
parameters
phone to an auto provisioning process weekly.
00:00 “static.auto_provision.weekly.begin_time” and N
Note: It works only if the value of the parameter
“static.auto_provision.weekly.end_time”).
4-Thursday
Note: It works only if the value of the parameter
“static.auto_provision.weekly.enable” is set to 1 (On).
“static.auto_provision.weekly.enable”
It triggers the flexible feature to on orisoff. set to 1 (On).
Week
Note: here
5-Friday The automeans from Sunday
provisioning may tobeSaturday,
performed for example,
during
0 today isworking
normal Thursday (Dec.when
hours 22), the
thefirst week starts
IP phone has beenfrom N
0-Off
Sunday (Dec.
inactivated
6-Saturday for25)
thetodesignated
this Saturday time(Dec. 31). the starting
between
time and ending time. It works only if the value of the
1-On
It configures the interval (in days) for the IP DECT phone
parameter “static.auto_provision.weekly.enable” is set to
Example:
to perform an auto provisioning process.
1 1 (On). Week here means from Sunday
auto_provision.weekly.dayofweek to Saturday, for
= 01 will N
If
Theit is set provisioning
auto to 1 (On), theaccurs IP DECT onphone
a random perform
day anthis
within
example,
It means today
the IP is Thursday
DECT phone (Dec.
will 22), the an
perform firstauto
week starts
auto provisioning process
period based on the phone's MAC address. at random between a starting
from Sunday process
provisioning (Dec. 25)bytorandomly
this Saturday (Dec.a31).
selecting day from
time
It configured
configures the by the parameter
starting time of the day for the IP DECT
Sunday and Monday weekly.
"static.auto_provision.flexible.begin_time" and anatending
Example:
phone to perform an auto provisioning process
02:00 time configured by the parameter = 30
static.auto_provision.flexible.interval N
random.
Note: It works only if the value of the parameter
"static.auto_provision.flexible.end_time"
The IP DECT phone will perform an auto on a random day
provisioning
“static.auto_provision.weekly.enable”
within the period configured is set to 1 (On).
process
Note:
It on a
It worksthe
configures random
only day (e.g.,
if thetime
ending 18)
valueofofthe based
theday on
parameter
for thetheIPphone's
DECT
by
MAC theaddress.
parameter "static.auto_provision.flexible.Interval".
“static.auto_provision.flexible.enable” is set to 1 (On).
phone to perform an auto provisioning process at
Blank N
random.
Note: It The day only
works withinif the period
value ofisthe
decided based upon
parameter
the phone's MAC address and does not
“static.auto_provision.flexible.enable” is change
set with a
If
It it is left blank
configures theoraccess
set toURL
a specific
of the value equal1to(On).
to
provisioning starting
server.
reboot whereas the time within the start and end is
time configured by the parameter
Blank calculated again with every reboot. N
“static.auto_provision.weekly.begin_time”, the IP DECT
phone will perform an auto provisioning process at the
starting
It time.the user name for provisioning server
configures
access.
Blank If it is set to a specific value greater than starting time N
configured by the parameter
“static.auto_provision.weekly.begin_time”,
It configures the password for provisioningthe IP DECT
server access.
phone will perform an auto provisioning process at
Blank random between the starting time and ending time. N

It it is set to a specific value less than starting time

It triggers the DHCP Option feature to on or off.
configured by the parameter
1 “static.auto_provision.weekly.begin_time”, the IP DECT N
0-Off
phone will perform an auto provisioning process at
random between the starting time on that day and
1-On
It configures the custom DHCP option for requesting
ending time in the next day.
provisioning server address.
Blank N
If it is set to 1(On), the IP DECT phone will obtain the
Note: It works only if the value of the parameter
provisioning
Note: It worksserver
only address by detecting
if the value DHCP options.
of the parameter
“static.auto_provision.flexible.enable” is set to 1 (On).
“static.auto_provision.dhcp_option.enable” is set to 1
(On).
 It configures the DHCP option 60 type.
0 N
0-ASCII

1-Binary
It configures the value (vendor name of the device) of
DHCP option 60.
yealink N
If it is set to 0 (ASCII), the vendor-identifying information
is in ASCII format.
It enables or disables the IP phone only to download the
If it is set tofiles.
encrypted 1 (Binary), the vendor-identifying
0 information is in the format defined in RFC 3925. N
0-Disabled
It enables or disables the IP DECT phone to encrypt
1-Enabled
<MAC>-local.cfg file using the plaintext AES key.
0
If it is set to 0 (Disabled), the IP DECT phone will
0-Disabled
download
It enables or thedisables
configuration files (e.g.,
the IP DECT phone sip.cfg,
to decrypt
account.cfg, <MAC>-local.cfg)
1-Enabled
configuration files using the encryptedfile fromAES the keys.
server during
0 auto provisioning no matter whether the files are N
encrypted
If it is set toor0not.
0-Disabled And then
(Disabled), theresolve
MAC-localtheseCFG filesfile
and update
will be
settings
uploaded onto the
unencrypted IP DECT
It configures the plaintext AES key forand phone
replace system.
the one (encrypted or
unencrypted) stored onthe
1-Enabled
encrypting/decrypting theCommon
server if you have configured
CFG/Custom CFG
Blank If
toitback is setuptothe
1 (Enabled),
MAC-localthe CFGIP file
phoneto the willserver
only download
by the N
file.
the
parameter
If it is
The encrypted
set to
valid configuration
characters files (e.g.,
“static.auto_provision.custom.sync”.
0 (Disabled), the 0IP~DECT
contain: 9, A ~ sip.cfg,
phone
Z, a ~will decrypt
z and the
account.cfg,
the
followingencrypted <MAC>-local.cfg)
special configuration
characters are or
files <MAC>-contact.xml
using
also plaintext #AES $ %keys
It configures the plaintext AES key forsupported: *+
file
If -it. from
:is=set
,configured ?@ the 1]server
to[on ^the }during
(Enabled),
_ { IP DECT
~. theauto provisioning,
MAC-local
phone. CFG and
file then
will be
encrypting/decrypting the MAC-Oriented files
Blank resolve these
uploaded files and
encrypted andupdate settings
will replace the onto
onethe IP phone
(encrypted N
(<MAC>.cfg, <MAC>-local.cfg and <MAC>-contact.xml).
system
or unencrypted)
If it is set to stored
1 (Enabled), on the
the IP server
DECT if you have
Example:
The valid characters contain: 0~ 9, A phone
~ Z, a ~ willz and the
configured
download to back up the MAC-local
<xx_Security>.enc
static.auto_provision.aes_key_16.com
following special characters files (e.g., =CFG file to#the
It configures the access URL are
for also
the supported:
custom config$files.
%*+
server
, - . : = by? @the
<sip_Security>.enc,
0123456789abcdef [ ] parameter
^ _ { } <account_Security>.enc)
~. during auto
Blank “static.auto_provision.custom.sync”.
provisioning, The plaintext theAES key Y
Note: The fileand formatthenofdecrypts
custom these files
configuration intofile must
is configured
plaintext
Note:
Example: Forkeys by
decrypting,the
(e.g., parameter
key2,
it key3)
works respectively
only if the using
value of the
the
be *.bin.
“static.auto_provision.aes_key_16.mac”.
phone
parameter built-in key (e.g., key1). The IP =
“static.auto_provision.aes_key_in_file”
static.auto_provision.aes_key_16.mac DECT phone is then
set to
It configures the access URL of the custom MAC-
decrypts
0 (Disabled). the encrypted
0123456789abmins If the downloadedconfiguration files usingfile is
MAC-Oriented
Oriented CFG file.
Blank corresponding
encrypted and the key parameter
(e.g., key2, key3). N
“static.auto_provision.aes_key_16.mac”
Note: For decrypting, it works only if the is left
value blank,
of thethe IP
DECT phone
parameter will try to encrypt/decrypt the MAC-is set to
“static.auto_provision.aes_key_in_file”
It configures the protocol the IP DECT phone uses to
Oriented
0 (Disabled). file If
using the AES key configured
the downloaded MAC-Oriented by the file is
connect to the provisioning server.
TFTP parameter and
encrypted “static.auto_provision.aes_key_16.com”.
the parameter N
“static.auto_provision.aes_key_16.mac” is left blank, the IP
Note: It works only if the protocol type is not defined in
DECT phone will try to encrypt/decrypt the MAC-
the
It access or
enables URL of the the
disables provisioning
IP DECT phone serverto configured
resolve the by
Oriented file using the AES key configured by the
the
access parameter
URL of the "static.auto_provision.server.url".
provisioning server using download
1 parameter “static.auto_provision.aes_key_16.com”. N
libraries mechanism.

0-Disabled
It configures the retry times when the IP DECT phone
fails to resolve the access URL of the provisioning server.
2 N
1-Enabled
Note: For each different DNS server, it works only if the
If it
value
It is of
setthe
configures to 0parameter
(Disabled),
the timeout the IP DECT phone
(in seconds) for theresolves
phone tothe
accesstoURL of thetheprovisioning
"static.auto_provision.dns_resolv_nosys"
retry resolve access URL of server using system
is set to 1 server.
the provisioning
5 mechanism. N
(Enabled).
Note: For each different DNS server, it works only if the
value of the parameter
It configures the maximum number of attempts to
"static.auto_provision.dns_resolv_nosys"
transfer a file before the transfer fails. is set to 1
3 N
(Enabled).
Example:
static.auto_provision.attempt_before_failed
It configures the time (in seconds) to wait after = 5 a file
transfer fails before retrying the transfer via auto
5 N
provisioning.

Example:
It enables or disables the IP DECT phone's MAC address
static.auto_provision.retry_delay_after_file_transfer_failed
to be included in the User-Agent header of HTTP/HTTPS
1 Y
= 5
transfers via auto provisioning.

0-Disabled

1-Enabled

If it is set to 0 (Disabled), the phone’s MAC address is not

included in the User-Agent header of HTTP/HTTPS
 It triggers the power on feature to on or off.
1 N
0-Off

1-On
It triggers the Plug and Play (PnP) feature to on or off.
1 N
If it is set to 1 (On), the IP DECT phone will perform an
0-Off
auto provisioning process when powered on.
1-On
It enables or disables the IP DECT phone to reboot after
auto provisioning when there is no specific configuration
0 Y
If it is set to
requiring 1(On), the
a reboot. It isIP DECT phone
especially usefulwill broadcast
when there isPnP no
SUBSCRIBE
specific messages to
configuration obtain areboot
requiring provisioning
in the server
address
configuration
It enables during startup.
files,
or disables butthe you IP want
DECTtophone force totheupload
IP DECT the
phone to reboot after
<MAC>-local.cfg file to auto
the provisioning.
server each time the file
0 N
updates, and download the <MAC>-local.cfg file from
0-Disabled
the server during auto provisioning.
It configures the URL for uploading/downloading the
1-Enabled
0-Disabled
<MAC>-local.cfg file.
Blank
If it is left blank, the IP DECT phone will try to
Note:
1-Enabled It works onlythe
upload/download for<MAC>-local.cfg
the current auto file provisioning
to/from the
process.
root If youof
directory want the IP DECT
provisioning phone to reboot after
server.
It enables or disables the IP DECT phone to protect
every
If it is auto
set toprovisioning
1settings
(Enabled), process,
theauto
IP DECTthe parameter
phone will must upload be
personalized after provisioning.
0 always
the contained
<MAC>-local.cfg in the
fileconfiguration
to the file
provisioning and set
server to 1
or a N
Note: It works only if the value of the parameter
(Enabled).
specific server each time the file updates
"static.auto_provision.custom.sync" is set to 1 (Enabled). to back up this
0-Disabled
If theDuring
file. IP DECT phone
auto reboots repeatedly
provisioning, the IP DECT after it is will
phone set to
It configures the way the IP DECT phone uploads the
1 (Enabled),the
download you can try to set the
<MAC>-local.cfg value
file from ofthe
the parameter
1-Enabled
<MAC>-local.cfg file to the provisioning server (for
0 "static.auto_provision.power_on"
provisioning server or a specific server to 0 (Off).
to override the N
HTTP/HTTPS server only).
one stored on the phone.
If it is set to 1 (Enabled), <MAC>-local.cfg file generates
and
0-PUT
It personalized
configures non-static
the time settings
(in seconds) to configured
wait after avia
fileweb
Note:
or It works
handset only if the will
value
beof the after
parameter
transfer failsuser interface
before retrying the kept
transfer viaauto
auto
5 “static.auto_provision.custom.protect”
provisioning. is set to 1 N
1-POST
provisioning.
(Enabled). The upload/download path is configured by
the
Note:parameter
The “static.auto_provision.custom.sync.path”.
Note:
It It hasprovisioning
works
configures only
athe
higher
time (inpriority
if priority
the value
than
seconds) mechanism
of the value
to wait (handset/web
parameterdefined
after a file by
user
the interface
parameter
transfer >central provisioning
“static.auto_provision.custom.sync” is>factory
setfor defaults)
to 1HTTP/HTTPS
“static.network.attempt_expired_time”.
fails before retrying the transfer (Enabled).
10 takes effect only if the value of this parameter is set to 1 Y
connection.
(Enabled). If the value of the parameter “overwrite_mode”
is set to
Note: It 1has
in athe bootpriority
lower file, thethan
valuetheofvalue
this parameter
defined $PNbywill
It configures the characters to replace the wildcard
be forced
thethe to
parameter set to 1 (Enabled).
in received URL of the provisioning server.
W52P N
“static.auto_provision.attempt_expired_time”.
Note: The configured characters must be in accordance
with
It the actual
configures thedirectory
name ofname of the provisioning
the activation code for server.
triggering auto provisioning.
Blank Y

It configures the activation code to trigger auto

provisioning.
Blank Y
The activation code can be numeric characters, special
characters
It # *the
configures or access
a combination of them
URL of the .
provisioning server
for the IP DECT phone to perform auto provisioning
Blank Example: Y
which is triggered by activation code.
autoprovision.1.code = 123
autoprovision.2.code
It configures the user = ** for authentication during
name
autoprovision.3.code
auto = *123
provisioning which is triggered by activation code.
Blank Y

It configures the password for authentication during auto

provisioning which is triggered by activation code.
Blank Y

It configures the plaintext AES key for decrypting the

Common CFG file.
Blank Y
If it is configured, it has a higher priority than the value
configured by the parameter
“static.auto_provision.aes_key_16.com”.
 It configures the plaintext AES key for decrypting the
MAC-Oriented CFG file.
Blank Y
If it is configured, it has a higher priority than the value
configured
It enables orbydisables
the parameter
the transfer-to party’s phone not to
“static.auto_provision.aes_key_16.mac”.
prompt a missed call on the LCD screen before
1 N
displaying the caller ID when completing a semi-
attended transfer.
It enables or disables the phone to complete the blind
0-Disabled
transfer through on-hook besides pressing the TRAN/R
1 N
key (Blind transfer means transfer a call directly to
1-Enabled
another party without consulting).
It enables or disables the phone to complete the
Note: Semi-attended
0-Disabled
attended transfer
transfer through meansbesides
on-hook transferpressing
a call after
the
1 hearing the ringback tone. N
TRAN/R key (Attended transfer means transfer a call
1-Enabled
with prior consulting).
It configures the frequency level of DTMF digits (in db).
Note: Blind transfer means transfer a call directly to
0-Disabled
-10 another party without consulting. N
1-Enabled
It enables or disables the IP DECT phone to suppress the
Note: Semi-attended
display of DTMF digitstransfer means
during an transfer
active call. a call after
0 hearing the ringback tone; Attended transfer means N
transfer a call with prior consulting.
0-Disabled
It configures the duration time (in milliseconds) for each
1-Enabled
digit when a sequence of DTMF tones is played out
100 N
automatically.
If it is set to 1 (Enabled), the DTMF digits are displayed as
asterisks.
Note:
It enablesIf the
ortime interval
disables the between two DTMF
IP DECT phone digits the
to display is less
than this
DTMF value,
digits for two or more
a short same
period DTMF
before digits could
displaying be
asterisks
0 N
identified
during an as onecall.
active DTMF digit. This may cause the loss of
one or more DTMF digits. For example, 2662 may be
identified
enables as
0-Disabled
It or 262. If so,the
disables you
IPcan modify
DECT phonethe
tovalue of this
present the
parameterinformation
diversion to a little lower
whenthan the default
an incoming value.
call is forwarded
1 N
1-Enabled
to your IP DECT phone.

Note:
0- It works
Disabled
It enables only if the
or disables the IP
value
DECTof phone
the parameter
to forward
“features.dtmf.hide”
incoming is set to 1 (Enabled).
calls to international numbers (the prefix is 00).
1 N
1-Enabled
0-Disabled
It configures the language used on the web user
1-Enabled
interface.
English N
Example:
static.lang.wui
It configures the = English
access URL of the custom language
If youfor
pack want
theto useuser
web the interface.
custom language (e.g., Wuilan) for
Blank the IP DECT phone, configure the parameter N
“static.lang.wui = Wuilan”.
Example:
wui_lang.url
It deletes the=specified
http://192.168.10.25/1.English.js
or all custom web language packs
Note:
During
and Ifthe
note the language
auto
language of your
provisioning
packs browser
process,
of the web user is not
the supported
IP DECT
interface. phone
Blank by the IP DECT
connects to thephone, the web userserver
HTTP provisioning interface will use N
English by default.
“192.168.10.25”,
Example: and downloads the language pack
“1.English.js”.
Delete all custom
It configures the area language
code to packs of the before
be added web userthe
The English
interface:
entered numberslanguage
when translation will be changed
dialing out.
Blank accordingly
wui_lang.delete if you have modified the language template
= http://localhost/all N
file.
Example:
Delete a custom the language
dialplan.area_code.code
It configures minimum pack
= 0592 of of
length thethe
web user interface
entered number.
If you11.Russian.js):
(e.g., want to download multiple language packs to the
1 web user
Theinterface
wui_lang.delete
Note: length = ofsimultaneously, you can
http://localhost/11.Russian.js
the entered number configure
must be as N
following:
between the minimum length configured by the
wui_lang.url“dialplan.area_code.min_len”
parameter = http://192.168.10.25/1.English.js
It configures the maximum length of theand the
entered
wui_lang.url
maximum = http://192.168.10.25/11.Russian.js
length configured by the parameter
number.
15 “dialplan.area_code.max_len”. N
Note: The value must be larger than the minimum
length.
 It configures the desired line to apply the area code rule.
The digit 0 stands for all lines. If it is left blank, the area
Blank N
code rule will apply to all lines on the IP DECT phone.

Example:
It configures the block out numbers.
dialplan.area_code.line_id = 1
Blank N
Example:
Note: Multiple line IDs are separated
dialplan.block_out.number.1 = 4321 by commas.
When you dial the number “4321”
It configures the desired line to apply on your phone,
the block outthe
rule.
dialing will fail and the LCD screen will prompt
The digit 0 stands for all lines. If it is left blank, the block
Blank "forbidden N
out rule willnumber".
apply to all lines on the IP DECT phone.

Example:
It configures the dial now rule (the string used to match
dialplan.block_out.line_id.1
the numbers entered by the=user).
1,2,3
Blank N
When entered numbers match the predefined dial now
Note: Multiple
rule, the IP DECTline IDs are
phone willseparated by commas.
automatically dial out the
numbers
It without
configures pressing
the desired thetosend
line applykey.
the dial now rule.
The digit 0 stands for all lines. If it is left blank, the dial
Blank Example: N
now rule will apply to all lines on the IP DECT phone.
dialplan.dialnow.rule.1 = 123
Example:
It configures the entered number to be replaced.
dialplan.dialnow.line_id.1 = 1,2
Blank N
Example:
Note: Multiple line IDs are
dialplan.replace.prefix.1 =1 separated by commas.
It configures the alternate number to replace the entered
number.
Blank N
Example:
dialplan.replace.prefix.1
It configures the desired=line1 andto apply the replace rule.
dialplan.replace.replace.1 =
The digit 0 stands for all lines.254245
If it is left blank, the
Blank When N
replaceyouruleenter the number
will apply ”1” and
to all lines on thepress the send
IP DECT key,
phone.
the number “254245” will replace the entered number “1”
.Example:
It configures the delay time (in seconds) for the dial now
dialplan.replace.line_id.1 = 1,2
rule.
1 N
When entered numbers match the predefined dial now
Note:
rule, the Multiple
IP DECT linephone
IDs are
willseparated by commas.
automatically dial out the
entered
It configures the access URL of the dial nowtime.
number after the designated delay rule template
file.
Blank N
If it is set to 0, the IP DECT phone will automatically dial
out the entered number immediately.
Example:
dialplan_dialnow.url
It configures the access = http://192.168.10.25/dialnow.xml
URL of the replace rule template
During
file. the auto provisioning process, the IP DECT phone
Blank connects to the provisioning server “192.168.10.25”, and N
downloads the replace dial now rule file “dialnow.xml”.
Example:
dialplan_replace_rule.url
It configures the waiting = time (in seconds) for account
http://192.168.10.25/dialplan.xml
register after startup.
0 During the auto provisioning process, the IP DECT phone Y
connects to the provisioning server “192.168.10.25”, and
downloads the replace rule file “dialplan.xml”.
It configures where the IP DECT phone retrieves the
destination address for response. The IP DECT phone will
1 Y
then send all SIP response messages to the destination
address.
It configures the IP DECT phone behavior when receiving
0-from
a VIA header
SIP NOTIFY messagein the request
which message
contains the header “Event:
1 Y
check-sync”.
1-from source address of the request message
0-The
It IP DECT
configures thephone will reboot
authentication only if thefor
mechanism SIPthe
NOTIFY
XSI
message
access. contains an additional string “reboot=true”.
0 N
1-The IPLogin
0-User DECTCredentials
phone willfor beXSI
forced to reboot.
Authentication
It enables or disables the IP DECT phone to reserve the
2-The
pound IP DECT
1-SIP Credentials
sign phone
(#) in for will
the XSI
user ignore the SIP NOTIFY
Authentication
name.
1 message. N
If it is set to(convert
0-Disabled 0 (User Login Credentials
the pound for“%23”)
sign into XSI
Authentication), the IP DECT phone uses the XSI user ID
and password for XSI authentication.
1-Enabled

If it is set to 1 (SIP Credentials for XSI Authentication), the

IP DECT phone uses the XSI user ID, the register name
and password of the SIP account for XSI authentication.
 It enables or disables the IP DECT phone to add a global
prefix "+" to the E.164 user parts in SIP: URI.
0 N
0-Disabled
It enables or disables the IP DECT phone to send all SIP
1-Enabledto the outbound proxy server forcibly in a
requests
1 N
dialog.
If it is set to 1 (Enabled), the IP DECT phone will
automatically
0-Disabled
It add a prefix
enables or disables the IP"+" to the
DECT number
phone in RFC
to use the E.164
2543
format when you dial using the
(c=0.0.0.0) outgoing hold signaling. SIP URI (e.g.,
0 [email protected]). N
1-Enabled
0-Disabled
If
It it is set to 0the
configures (Disabled),
local SIPonly
port.the new SIP request
messages
1-Enabled from the IP DECT phone will be sent to the
5060 outbound proxy server in a dialog. Y
If it is set to 0 (Disabled), SDP media direction attributes
If it
(such
It is as
seta=sendonly)
configures to 1the
(Enabled),TLSall
localper RFCthe3264
listenSIP request
port. messages
is used when placing
from
a call the IP DECT phone will be forced to send to the
on hold.
5061 outbound proxy server in a dialog. N
If it is set to 1 (Enabled), SDP media connection address
Note:
c=0.0.0.0 It works only
per the
RFC if the
2543 is value
used of theplacing
when parameter
a callfor
on
It configures SIP session timer T1 (in seconds)
“account.X.outbound_proxy_enable” is set to 1 (Enabled)
hold.
account X.
0.5 and the outbound server address has been correctly N
T1 is an estimate of the Round Trip Time (RTT) of
configured on the phone.
transactions between a SIP client and SIP server.
It configures the SIP session timer T2 (in seconds) for
account X.
4 N
Timer T2 represents the maximum retransmitting time of
any SIP request message.
It configures the SIP session timer T4 (in seconds) for
account X.
5 N
T4 represents the maximum duration a message will
remain in the network.
It enables or disables the handset to display the identity
contained in the To field of the INVITE message when it
0 Y
receives an incoming call.

0-Disabled
It configures the string that must be contained in the SIP
server address.
Blank N
1-Enabled

It enables or disables the IP DECT phone to only accept

the SIP message from the SIP and outbound proxy
0 N
server.

0-Disabled
It configures the call waiting mode.
0 N
1-Enabled
0-Local

1-XSI
It enables or disables the call waiting feature.
1 N
If it is set to 1 (XSI), the status of the call waiting feature
0-Disabled
between the IP DECT phone and the BroadWorks server
is synchronous.
1-Enabled
Enables or disables the IP DECT phone to play the call
waiting tone when the IP DECT phone receives an
1 Note: If itto
is 0set to 1 (XSI), N
If it is set
incoming call (Disabled),
during aitnew
a call. works only if the
incoming call value
is of the
parameter
automatically "bw.xsi.enable"
rejected by the is set to 1 (Enabled).
IP DECT phone with a busy
message
0-Disabled
It configures duringthe acall
call.
waiting on code to activate the
server-side call waiting feature. The IP DECT phone will
Blank If it isthe
set call
to 1waiting
(Enabled), the LCD screen willwhen
present N
1-Enabled
send on code to the server youa
new incoming
activate call during
call waiting featurea call.
on the IP DECT phone.
If it
It is set to 1the
configures (Enabled), the IP
call waiting offDECT
codephone will perform
to deactivate the
an audible indicator
Example:
server-side call waiting when receiving
feature. a new
The IP DECTincoming
phone willcall
Blank during a call.
call_waiting.on_code = *71 N
send the call waiting off code to the server when you
deactivate call waiting feature on the IP DECT phone.
Note: It works only if the value of the parameter
“call_waiting.enable” is set to 1 (Enabled) and the silent
Example:
mode is off .
call_waiting.off_code = *72
 It configures a return code and reason of SIP response
messages when rejecting an incoming call by DND. A
480 N
specific reason is displayed on the caller’s phone LCD
screen.
It enables or disables allow IP address call.
404-Not found
1 N
0-Disabled
480-Temporarily not available
1-Enabled
It configures a return code and reason of SIP response
486-Busy
messages here when the IP DECT phone rejects an incoming
486 N
Note:
call. If you want
A specific to receive
reason an IP on
is displayed address call, make
the caller’s sure
phone
603-Decline
the
LCD value
screen. of the parameter “sip_trust_ctrl” is set to 0
(Disabled).
It configures the timeout interval (in minutes) for web
If it is set
404-Not
access to 486 (Busy here), the caller’s phone LCD
found
authentication.
5 screen will display the reason “Busy here” when the callee N
enables DND feature.
480-Temporarily
Example: not available
features.relog_offtime
It configures the account = 5information displayed on the
486-Busy
If
LCD log here
youscreeninto
whenthethe
webhandset
user interface and
is on the leave it for 5
pre-dialing,
3 minitues, N
dialing or itringing
will automatically
screen. log out.
603-Decline
1-Label
It enables or disables the IP DECT phone to deal with the
If it is set to 486 (Busy here), the caller’s phone LCD
180 SIP message received after the 183 SIP message.
1 screen willName
display the message “Busy here” when the N
2-Display
callee rejects the incoming call.
0-Disabled
3-User
It enablesNameor disables the base station to reboot during a
1-Enabled
call when it receives a packet.
0 Note: It works only if the value of the parameter N
“account.X.hide_local_number.enable”
If is set will
it is set to 1 (Enabled), the IP DECT phone
0-Disabled to 0resume
(Disabled).
and
It play the local
configures ringbacktime
the duration tone(inupon a subsequent
seconds) in the 180
message
1-Enabled received.
ringback state.
180 N
If it is set to 180, the phone will cancel the dialing if the
call
It is not answered
configures withintime
the duration 180 (in
seconds.
seconds) in the ringing
state.
180 N
If it is set to 180, the phone will stop ringing if the call is
not answeredemergency
It configures within 180 numbers.
seconds.
Multiple emergency numbers are separated by commas.
112, 911, 110 N

It enables or disables the IP DECT phone to save the call

log.
1 N
0-Disabled
It enables or disables the IP DECT phone to display the
1-Enabled
same call log of a day cumulatively.
1 N
If it is set to 0 (Disabled), the IP DECT phone cannot log
0-Disabled
the
It missedorcalls,
enables placed
disables to calls
end aand
callreceived calls inthe
when placing the call
log lists. into the charger cradle.
1-Enabled
handset
1 N
If it is set to 0 (Disabled), the same call log will display in
0-Never
a list respectively.
It enables or disables the IP DECT phone to play a
If it is settone
1-Always
warning to 1 when
(Enabled), the same
it receives callvoice
a new log of a day will
mail.
1 display cumulatively. N
0-Disabled
It configures the “#” key or “*” key as the send key..
1-Enabled
1 N
0-Disabled

1-#
It key
configures the characters the IP DECT phone filters
when dialing.
,- N
2-* key
If the dialed number contains configured characters, the
If itDECT
IP is setphone
to 0 (Disabled), neither “#”
will automatically key
filter nor characters
these “*” key can
be used
when as the send key.
dialing.

If it is set to 1 (# key), the pound key is used as the send

Example:
key.
features.call_num_filter = ,-
If you dial 3-61, the IP DECT phone will filter the
 It configures the ringer device for the IP DECT phone.
0 N
0-Use Speaker

1-Use Headset
It configures the duration time (in seconds) that a dial
tone plays before a call is dropped.
60 N
Example:
features.call.dialtone_time_out
It configures the duration time = (in30seconds) for the busy
The
tone. When one party releases the dial
IP phone will stop playing the call, tone in tone
a busy 30 is
3 secondsto when on theparty
dialing screen and N
audible the other indicating thatreturn back to
the call
the idle screen.
connection breaks.
It enables or disables the TR069 feature.
If it is set to 0, the call is not dropped.
0-0s
0 N
0-Disabled
3-3s
1-Enabled
It configures the user name for the IP DECT phone to
5-5s
authenticate with the ACS (Auto Configuration Servers).
Blank N
Leave it blank if no authentication is required.
If it is set to 3 (3s), a busy tone is audible for 3 seconds
on the IP DECT
Example:
It configures thephone.
password for the IP DECT phone to
static.managementserver.username
authenticate = tr69
with the ACS (Auto Configuration Servers).
Blank N
Leave it blank if no authentication is required.

Example:
It configures the access URL of the ACS (Auto
static.managementserver.password
Configuration Servers). = tr69
Blank N
Example:
static.managementserver.url
It configures the user name for the IP DECT phone to
=http://officetelprov.orangero.net:8080/ftacs-digest/ACS
authenticate the incoming connection requests.
Blank N
Example:
static.managementserver.connection_request_username
It configures the password for the IP DECT phone to
= accuser
authenticate the incoming connection requests.
Blank N
Example:
static.managementserver.connection_request_password
It enables or disables the IP DECT phone to periodically
= acspwd
report its configuration information to the ACS (Auto
1 N
Configuration Servers).

0-Disabled
It configures the interval (in seconds) for the IP DECT
phone to report its configuration to the ACS (Auto
60 N
1-Enabled
Configuration Servers).

Note:
It It works
enables only if the INVITE
or disables parameter
request with the user
“static.managementserver.periodic_inform_enable”
name of the account when this account barges in anis set
0 N
to 1 (Enabled).
active call.

0-Disabled
It configures the access URL of the base firmware file.
Blank Y
1-Enabled
Example:
static.firmware.url = http://192.168.1.20/25.73.0.27.rom
It configures the user name of the user for phone’s web
user interface access.
user N

It configures the user name of the administrator for

phone’s web user interface access.
admin N

It configures the user name of the var for phone’s web

user interface access.
var N
Note: It works only if the value of the parameter
“static.security.var_enable” is set to 1 (Enabled).
 It enables or disables the IP DECT phone to reserve
custom certificates after it is reset to factory defaults.
0 N
0-Disabled
It configures the password of the user, var and
1-Enabled
administrator for phone’s web user interface access.
Blank N
The valid value format is username: new password.

Example:
It enables or disables the IP DECT phone to only trust the
static.security.user_password
server certificates in the Trusted = user:123 means
Certificates list.setting
1 the password of user (current user name is “user”) to Y
password
0-Disabled123.
static.security.user_password = admin:456 means setting
It configures the type of certificates in the Trusted
the password of administrator (current user name is
1-Enabled
Certificates list for the IP DECT phone to authenticate for
2 “admin”) to password 456. Y
TLS connection.
If it is set to 0 (Disabled), the IP DECT phone will trust the
Note:
server IP
noDECT
matter phones
whether support ASCII characters
thedevice
certificate sent byfor 32-
the
0-Default
It configures Certificates
the type of the certificates the IP
126(0x20-0x7E)
serverphone in
is validtoorsend passwords.
not. for TLS authentication.
DECT
0 Y
1-Custom Certificates
If it is set to
0-Default 1 (Enabled), the IP DECT phone will
Certificates
authenticate
2-All Certificatesthe server
It enables or disables thecertificate
IP DECT based
phoneon to the trusted
mandatorily
certificates
1-Custom
validate list. Only when
theCertificates
Common Name theorauthentication
SubjectAltName succeeds,
of the
0 the IP DECT phone willserver.
trust the server. Y
certificate sent by the

0-Disabled
It configures the system PIN of the base station.
0000 N
1-Enabled

It enables or disables the 3-level permissions (admin,

user, var).
0 Y
0-Disabled
It configures the access URL of the file, which defines 3-
1-Enabled
level access permissions.
Blank Y

It configures the default access level to access the

handset user interface.
0 Y
0-user
It configures the access URL of the custom trusted
1-var
certificate used to authenticate the connecting server.
Blank N
2-admin
Example:
static.trusted_certificates.url
It deletes all uploaded trusted = http://192.168.1.20/tc.crt
certificates.
Note: It works only if the value of the parameter
Blank “static.security.var_enable”
Note: is settotoupload
The certificate you want 1 (Enabled).
must be in N
Example:
*.pem, *.crt, *.cer or *.der format.= http://localhost/all
static.trusted_certificates.delete
It configures the access URL of the certificate the IP DECT
phone sends for authentication.
Blank N
Example:
static.server_certificates.url
It deletes all uploaded server = http://192.168.1.20/ca.pem
certificates.
Blank Note: The certificate you want to upload must be in N
Example:
*.pem or *.cer format.
static.server_certificates.delete = http://localhost/all
It enables or disables the Custom Factory Configuration
feature.
0 N
0-Disabled
It configures the access URL of the custom factory
1-Enabled
configuration files.
Blank Y
If it is set
Note: to 1 (Enabled),
It works only if theImport Factory
value of Config item will
the parameter
be displayed on the IP DECT phone's web userisinterface
“static.features.custom_factory_config.enable” set to 1
at the pathand
(Enabled) Settings->Configuration.
the file format of customYou can import a
factory
custom factoryfile
configuration configuration file or delete the user-
must be *.bin.
defined factory configuration via web user interface.
 It configures the access URL of the blacklist file.
Blank N

It enables or disables the VAD (Voice Activity Detection)

feature on the IP DECT phone.
0 N
0-Disabled
It enables or disables the CNG (Comfortable Noise
1-Enabled
Generation) feature on the IP DECT phone.
0 N
0-Disabled
It configures the type of jitter buffer in the network.
1-Enabled
1 N
0-Fixed

1-Adaptive
It configures the minimum delay time (in milliseconds) of
jitter buffer in the network.
60 N
Note: It works only if the value of the parameter
“voice.jib.adaptive” is set to delay
It configures the maximum 1 (Adaptive).
time (in milliseconds) of
jitter buffer in the network.
240 N
Note: It works only if the value of the parameter
“voice.jib.adaptive”
It is set delay
configures the normal to 1 (Adaptive).
time (in milliseconds) of
jitter buffer in the network.
120 N
Note: It works only if the value of the parameter
“voice.jib.adaptive”
It is set to
configures the country 0 (Fixed).
tone for the IP DECT phone.
Custom Example: N
voice.tone.country = Custom
It customizes the dial tone.
Blank N
tonelist = element[,element] [,element]…Where
element = [!]Freq1[+Freq2][+Freq3][+Freq4] /Duration
The value format
It customizes the is Freq/Duration
ringback tone. or !Freq/Duration.
Freq:value
The the frequency of the tone (ranges
format is Freq/Duration. from information
For more 200 to 4000
Blank N
Hz).the
on If itvalue
is setformat,
to 0Hz,refer
it means the
to the tone is not played.
parameter
Duration: the time duration (in milliseconds, ranges from
“voice.tone.dial”.
0
It to 4000ms) the
customizes of playing the tone.
busy tone.
Note: It works only if the
The value format is Freq/Duration value of the parameter
or !Freq/Duration. For
Blank You can configure on atismost eight different tones for one N
“voice.tone.country”
more information setvalue
the to Custom.
format, refer to the
condition,
parameter each tone is separated by comma (e.g.,
“voice.tone.dial”.
250/200,0/1000,200+300/500).
It customizes the call waiting tone.
Note:
The It works
value only
format if the value of the
is Freq/Duration parameter
or !Freq/Duration. For
Blank If you information
want the IP DECT phone to play tones once, N
“voice.tone.country”
more onisthe
set to Custom.
value format, refer to the add
an exclamation
parameter mark “!” before tones (e.g., !
“voice.tone.dial”.
250/200,0/1000,
It configures the the number of handsets registered to
200+300/500,600+700+800+1000/2000).
Note: It works only if the value of the parameter
one base.
5 N
“voice.tone.country” is set to Custom.
Note: It works only if the value of the parameter
“voice.tone.country” is set to Custom.
It enables or disables the handset to display the called
contact information when it receives an incoming call.
1 N
0-Disabled
It configures the call information display method when
1-Enabled
the handset receives an incoming call, dials an outgoing
0 N
call or is during an active call.

0-Name+Number
It enables or disables the handset power indicator LED to
be turned on when the handset is idle.
0 N
1-Number+Name (not applicable to W52H handset)
0-Disabled (handset power indicator LED is off)
2-Name (not applicable to W52H handset)
1-Enabled (handset power indicator LED is solid red)
3-Number (not applicable to W52H handset)

4-Full Contact Info (display

name<sip:[email protected]>)
 It enables or disables the handset power indicator LED to
flash when the handset receives an incoming call.
1 N
0-Disabled (handset power indicator LED does not flash)
It enables or disables the handset power indicator LED to
1-Enabled
flash when (handset power
the handset indicator
receives LEDmail.
a voice fast flashes
1 (300ms) red) N
0-Disabled (handset power indicator LED does not flash)
It enables or disables the handset power indicator LED to
1-Enabled
flash when (handset power
the handset indicator
misses a call.LED slow flashes
1 N
(1000ms) red)
0-Disabled (handset power indicator LED does not flash)
It enables or disables the message key LED to flash when
1-Enabled
the handset(handset
receivespower
a voiceindicator
mail. LED slow flashes
1
(1000ms) red)
0-Disabled
1-Enabled
It enables or disables the base power indicator LED to
flash when registering an account successfully.
0 N
Note: It works only if the value of the parameter
“auto_provision.handset_configured.enable”
0-Disabled (base power indicator LED does not is set to 1
flash)
(Enabled).
It configures the access URL of the remote phone book.
1-Enabled (base power indicator LED slow flashes
Blank N
(1000ms) green)
Example:
remote_phonebook.data.1.url =
http://192.168.1.20/phonebook.xml
It configures the display name of the remote phone
book.
Blank N
Example:
remote_phonebook.display_name
It configures the display name of the = Friends
remote phone book
“Friends”
item. will be displayed on the LCD screen at the path
Blank OK->Directory. N
If it is left blank, "Remote Phone Book" will be the display
Example:
name.
remote_phonebook.data.1.name
It enables or disables the IP DECT=phone
Xmyl to perform a
remote phone book search for an incoming or outgoing
0 N
call and display the matched results on the LCD screen.

0-Disabled
It configures how often to refresh the local cache of the
remote phone book. If it is set to 3600, the IP DECT
21600 N
1-Enabled
phone will refresh the local cache of the remote phone
book every 3600 seconds.
It enables or disables the LDAP feature on the IP DECT
Note:
phone.If it is set to 0, the IP DECT phone will refresh the
0 N
local cache of the remote phone book aperiodically.
0-Disabled
It configures the search criteria for LDAP contact names
1-Enabled
look up. The “*” symbol in the filter stands for any
Blank N
character. The “%” symbol in the filter stands for the
name prefix entered by the user.
It configures the search criteria for LDAP contact
Example:look up.
numbers
Blank ldap.name_filter N
The “*” symbol in=the (|(cn=%)(sn=%))
filter stands for any character. The
When the cn or sn of the
“%” symbol in the filter LDAPfor
stands contact starts with
the number the
prefix
entered
entered prefix,
by the the record
user. will be displayed on the
It configures the IP address or domain name of the LDAP LCD
screen.
server.
Blank Example: N
ldap.number_filter
Example: = (|(telephoneNumber=%)(mobile=%)
(ipPhone=%))
ldap.host = 192.168.1.20
It configures the port of the LDAP server.
When the number prefix of the telephoneNumber,
389 mobile or ipPhone of the contact record matches the N
Example:
search
ldap.port = 389the record will be displayed on the LCD
criteria,
screen.
It configures the LDAP search base which corresponds to
the location of the LDAP phonebook from which the
Blank N
LDAP search request begins. The search base narrows the
search scope and decreases directory search time.

Example:
ldap.base = dc=yealink,dc=cn
 It configures the user name used to login the LDAP
server.
Blank N
This parameter can be left blank in case the server allows
anonymous to login. Otherwise you will need to provide
the user name
It configures topassword
the login the to
LDAP server.
login the LDAP server.
This parameter can be left blank in case the server allows
Blank Example: to login. Otherwise you will need to provide N
anonymous
ldap.user = cn=manager,dc=yealink,dc=cn
the password to login the LDAP server.
It configures the maximum number of search results to
Example:
be returned by the LDAP server. If the value of the
50 ldap.password = secret N
“Max.Hits” is blank, the LDAP server will return all
searched results. Please note that a very large value of
the
It “Max. Hits”
configures thewill slowattributes
name down theofLDAP eachsearch
recordspeed,
to be
thereforeby
returned it should
the LDAP be server.
configured accordingthe
It compresses to the
search
Blank N
available bandwidth.
results. You can configure multiple name attributes
separated by spaces.
Example:
It configures the number attributes of each record to be
ldap.max_hits
Example:by the
returned = LDAP
50 server. It compresses the search
Blank ldap.name_attr = cn sn N
results. You can configure multiple number attributes
This requires
separated by the “cn” and “sn” attributes set for each
spaces.
contact record
It configures theondisplay
the LDAP server.
name of the contact record
Example: on the LCD screen. The value must start with
displayed
Blank N
ldap.numb_attr
“%” symbol. = mobile ipPhone
This requires the “mobile” and “ipPhone” attributes set
for each contact
Example:
It configures the record on the LDAP
LDAP protocol server.
version supported by the
ldap.display_name = %cn
IP DECT phone. Make sure the protocol value
3 N
The cn of thewith
corresponds contact record isassigned
the version displayedonon
thethe LCD
LDAP
screen.
server.
It enables or disables the IP DECT phone to perform an
LDAP search when receiving an incoming call.
0 N
0-Disabled
It enables or disables the IP DECT phone to sort the
1-Enabled
search results in alphabetical order or numerical order.
0 N
0-Disabled
It configures the connection mode between the LDAP
1-Enabled
server and the IP DECT phone.
0 N
0-LDAP—Unencrypted connection between LDAP server
and
It the IP or
enables DECT phone
disables the(port 389 isphone
IP DECT used to
by perform
default). an
LDAP search when placing a call.
1 N
1-LDAP TLS Start—TLS/SSL connection between LDAP
server and the IP DECT phone (port 389 is used by
0-Disabled
default).
It enables or disables the IP DECT phone to search the
1-Enabled
telephone numbers starting with ”+” symbol and “00”
0 2-LDAPs—TLS/SSL connection between LDAPnumber
server and N
from the LDAP server if the incoming phone
the IP with”+”
starts DECTphone (port
or “00”. 636 is
When used by default).
completing the LDAP search,
the
It all search
enables results will
or disables thebeIP displayed
DECT phone on to
thesend
LCDRTCP
screen.
packets.
1 Y
0-Disabled
0-Disabled
1-Enabled
It configures the cname of the RTCP packets.
1-Enabled
Blank Example: Y
If the phone receives an incoming call from the phone
number 0044123456789, it will search 0044123456789
It configures the interval (in seconds) for the IP DECT
from the LDAP sever first, if no result found, it will search
phone to send RTCP packets.
5 +44123456789 from the server again. The phone will N
display all the search results.

It enables
Note: or disables
It works only ifthe
theIP DECT
value ofphone to send RTCP-
the parameter
XR packets.
“ldap.call_in_lookup” is set to 1 (Enabled). You may need
0 Y
to set the value of the parameter “ldap.name_filter” to be
0-Disabled
(|(cn=%)(sn=%)(telephoneNumber=%)(mobile=%)) for
searching the telephone numbers starting with ”+”
1-Enabled
symbol.
 It enables or disables the IP DECT phone to send a
session quality report to the central report collector at
0 N
the end of each call.

0-Disabled
It enables or disables the voice quality data of the last
call to be displayed on web interface at path Status-
0 N
1-Enabled
>RTP Status.

0-Disabled
It enables or disables the IP DECT phone to send an
interval quality report to the central report collector
0 1-Enabled throughout a call. N
periodically

0-Disabled
It configures the interval (in seconds) for the IP DECT
phone to send an interval quality report to the central
20 N
1-Enabled
report collector periodically throughout a call.

Note:
It Toworks
It
configures avoidthe overload,
only the
if the value
threshold interval
value ofofthe quality
parameter
listening reports
MOS only
score
generate when
(MOS-LQ) the call
multiplied byis10.
abnormal.
“phone_setting.vq_rtcpxr.interval_report.enable”
The threshold value of is set
MOS-to
Blank N
1 (Enabled).
LQ causes the phone to send a warning alert quality
report to the central report collector.
It configures the threshold value of listening MOS score
For example,
(MOS-LQ) a configured
multiplied by 10.value of 35 corresponds
The threshold to the
value of MOS-
Blank N
MOS
LQ scorethe
causes 3.5.phone
When to thesend
MOS-LQ
a criticalvalue computed
alert by
quality report
thethe
to phone is less
central thancollector.
report or equal to 3.5, the phone will
send a warning
It configures thealert qualityvalue
threshold report ofto onethewaycentral
delayreport
(in
collector.
milliseconds) that causes the phone to send a by
For example, When a the MOS-LQ
configured value
value of computed
28 corresponds theto the
warning
Blank phone is greater than 3.5, MOS-LQ
the phone willcollector.
not send a by N
MOS
alert score
quality 2.8.
reportWhen to the central value
report computed
warning
the phone alert quality
is less thanreport
or equalto the central
to 2.8, report will
the phone
collector.
send
For
It a criticalthe
example,
configures ifalert
is quality
it threshold
set to 500,report
when
value toone
of the way
central ofreport
valuedelay one
(in way
collector.
delay computed
milliseconds) When thatthe MOS-LQ
bycauses
the phone
phonevalue
is to computed
greater
send athan by equal
or
critical the
alert to
Blank If it isthe
phone set
is to blank,
greater warning
than 2.8,athealerts
phone are notquality
will generated
not send a due N
500,
quality phone
report towill
thesend
central warning
report alert
collector. report to
to
the MOS-LQ.
critical alertreport
central qualitycollector;
report towhen the central
the value report collector.
of one way
delay
For
It computed
example,
configures if it by
the theto
is set
domain phone isinless
500, when
name than
the
A record 500,
X. ofthe
value onephone
way
If it is
will
delay notsetsend
to blank,
computed bycritical
a warning alerts
alert
the phone isare
quality not generated
report
greater to the
than due to
central
or equal to
Blank MOS-LQ.
report collector. N
500, the phone will send a critical alert quality report to
Example:
the central report collector;
dns_cache_a.1.name when the value of one way
= yealink.pbx.com
If it
delay is set to blank, warning
It configures the IP address thatis the
computed by the phonealerts aredomain
less not generated
than 500, the in
name due
phone
A
to
willone
record notX way
senddelay.
maps to. One-way
a critical delay includes
alert quality report to both
the network
central
Blank delay and
report end system delay.
collector. N
Example:
If
It it is set to blank,
dns_cache_a.1.ip
configures = critical alerts
192.168.1.13
the time interval (inare not generated
seconds) due to
that A record
one way delay. One-way delay includes both
X may be cached before the record should be consultednetwork
300 delay N
again.and end system delay.

Example:
It configures the domain name in SRV record X.
dns_cache_a.1.ttl = 3600
Blank N
Example:
dns_cache_srv.1.name = _sip._tcp.yealink.pbx.com
It configures the port to be used in SRV record X.
0 N
Example:
dns_cache_srv.1.port = 5060
It configures the priority for the target host in SRV record
X.
0 N
Lower priority is more preferred.

It configures the domain name of the target host for an A

query in SRV record X.
Blank N
Example:
dns_cache_srv.1.target
It configures the weight=of
server1.yealink.pbx.com
the target host in SRV record
X.
0 N
When priorities are equal, weight is used to differentiate
the preference.Higher weight is more preferred.

Example:
dns_cache_srv.1.weight = 1
 It configures the time interval (in seconds) that SRV
record X may be cached before the record should be
300 N
consulted again.

Example:
It configures the domain name to which NAPTR record X
dns_cache_srv.1.ttl = 3600
refers.
Blank N
Example:
dns_cache_naptr.1.name = yealink.pbx.com
It configures the flag of NAPTR record X. (Always “S” for
SIP, which means to do an SRV lookup on whatever is in
Blank N
the replacement field)

S-Do
It an SRV the
configures lookup next
order of NAPTR record X.
NAPTR record with lower order is more preferred.
0 N
A-Do an A lookup next
Example:
U-No need tothe
dopreference
a DNS query
dns_cache_naptr.1.order
It configures next record X.
= 90of NAPTR
NAPTR record with lower preference is more preferred.
0 P-Service customized by the user N
Example:
Example:
dns_cache_naptr.1.preference = be
50 used for the next SRV
It configures a domain name to
dns_cache_naptr.1.flags = S
query in NAPTR record X.
Blank N
Example:
dns_cache_naptr.1.replace
It configures the transport = _sip._tcp.yealink.pbx.com
protocol available for the SIP
server in NAPTR record X.
Blank N
SIP+D2U: SIP over UDP
It configures the time interval (in seconds) that NAPTR
SIP+D2T:
record SIP be
X may over TCP before the record should be
cached
300 N
consulted again.
SIP+D2S: SIP over SCTP
Example:
It enables or disables the INVITE request with the user
SIPS+D2T:
name of theSIPS over when
dns_cache_naptr.1.ttl
account TCP
= 3600
this account barges in an
0 N
active call.
Example:
dns_cache_naptr.1.service
0-Disabled = SIP+D2T
It configures the channel mode when an incoming
intercom call is answered through the handset. The
0 N
1-Enabled
headset should be connected in advance.

0-Speaker
It enables or Mode
disables the recent call in dialing feature.
If it is set to 1 (Enabled), you can see the placed calls list
0 N
1-Headset
when Mode is on the pre-dialing screen.
the handsete

0-Disabled
It configures the access URL of the super search template
file.
Blank N
1-Enabled
Example:
super_search.url
It configures the = http://192.168.1.20/super_search.xml
default input method when the user
During
searchestheforauto provisioning
contacts process,
in the Local the IPLDAP,
Directory, DECT phone
1 connects N
Remote Phone Book, Blacklist or Network Directory.and
to the provisioning server “192.168.1.20”,
downloads the super search template file
“super_search.xml”.
1-Abc
It configures the access URL of the contact file of handset
The incomingBlank
line for handset 2-123
X.
N
1 is line 1. 3-ABC
The format of the file must be *.xml.
The incoming line for handset 4-abc
2 is line 2. Example:
5-ΑΒΓ
It configures the lines to receive incoming calls for
incoming line for handset
The outgoing handset.X.contact_list.url=
6-AÄÅ
handset X.
http://192.168.1.20/favorite_setting.xml
7-aäå N
3
1 is line 3.
1. Multiple line IDs are separated by commas.
incoming line for handset
The outgoing During
8-SŚŠ the auto provisioning process, the IP DECT phone
4 is line 2.
2 4. connects
9-sśš
1-Line 1 to the provisioning server “192.168.1.20”, and
It configures the lines to place outgoing calls for handset
The incoming
outgoing line for handset downloads
10-абв
2-Line 2 the directory file “favorite_setting.xml”.
X.
5 11-АБВ N
3 is line 5.
3. 3-Line 3
Multiple line IDs are separated by commas.
The outgoing line for handset 12-‫ אבג‬4
4-Line
4 is line 4. 5-Line 1
1-Line 5
The outgoing line for handset Example:
2-Line 2
5 is line 5. directory.search_default_input_method
3-Line 3 =1
4-Line 4
Note:
5-Line It5 works only when the corresponding input
method is enabled via handset user interface at the path:
The default outgoing lines for
handset 1 is 1.
The default outgoing lines for
handset 2 is 2. It configures the default line to place outgoing calls for
The
The handset name forlines
default outgoing handset
for handset X.
1 is Handset1. N
handset 3 is 3.
The
The handset name forlines
default outgoing handset
for Note: It works only if the line you want to select to be
2 is Handset2.
handset 4 is 4. default outgoing
It configures line should
the name be configured
of handset X. as outgoing
The
The handset name forlines
default outgoing handset
for line
It willforbehandset X inon
displayed advance.
the handset LCD screen.
3 is Handset3.
handset 5 is 5. N
The handset name for handset
Note: If it is set to blank, it will display the corresponding
4 is Handset4.
default
It handset
configures thename.
access URL of the handset (W52H or
The handset name for handset
5 is Handset5. W56H) firmware file.
Blank Y
Note: The priority of parameter “over_the_air.url” is lower
than
It “over_the_air.url.w52h”
configures the access URL and “over_the_air.url.w56h”.
of the W52H handset
firmware file.
Blank Y
Example:
over_the_air.url.w52h
Configures the access=URL
http://192.168.1.20/26.81.0.1.rom
of the W56H handset
firmware file.
Blank Note: The priority of parameter “over_the_air.url.w52h” is Y
higher than “over_the_air.url”.
Example:
over_the_air.url.w56h
It enables or disables =
tohttp://192.168.1.20/61.80.0.1.rom
upgrade the handset firmware
compulsively when the base detects a new handset
0 Note: Thefrom
priority Y
firmware the of parameter sever.
provisioning “over_the_air.url.w56h” is
higher than “over_the_air.url”.
0-Disabled
It enables or disables to pop up a tip when upgrading
the handset firmware from the provisioning server.
0 N
1-Enabled
0-Disabled
If it
It is set to
enables or0disables
(Disabled) and the the
to prompt value of thebox
pop-up parameter
when
“over_the_air.handset_tip”
1-Enabled the handset firmware
upgrading is set to 1 (Enabled),
from it will pop
the provisioning
1 up a tip on the handset to notify the user to confirm N
server.
upgrading
Note: If it isthe
setfirmware or not. the
to 1 (Enabled), If the value of
handset willthe
pop up
parameter
the message
0-Disabled
It enables “over_the_air.handset_tip”
or “Handsetthe
disables hasbase
a new istoset
firmware,
station to 0, you
update
deliver may
handset
go
now?”.to Settings->Upgrade
settings Itvia
worksautoonly if the Firmware
provisioningvaluetoofthe on
the handset handset
parameters
registered to trigger
1 the upgrading
1-Enabled manually.
“over_the_air.base_trigger” and to the base station N
or after the handset registering
If it is set to 1 (Enabled),
“over_the_air.handset_trigger”
successfully. it will upgrade
are set tothe handset
0 (Disabled).
firmware
Note: If itcompulsively without the
is set to 1 (Enabled), a pop-up
handset tipwill
on pop
the up
It configures whether the IP DECT phone automatically
handset.
the message
0-Disabled “Handset has a new firmware, update
answers an incoming internal intercom call and plays a
0 now?”. N
warningIttone.works only if the value of the parameter
“over_the_air.base_trigger”
1-Enabled is set to 0 (Disabled).
0-Off
It enables or disables screen saver feature.
If it is set to 0 (Disabled), the base station will not deliver
1 handset configurations via auto provisioning to the N
1-On(Beep
0-Disabled Off)
handset. The handset settings can be only changed via
handset
2-On(Beep
1-Enabled
it user
configures interface.
On)
the color scheme of the handset.
1 If it is
is set
setscheme
to 11 (Enabled),
0, (Enabled),
users the base station will be
deliver the
If it
0-Color to 1 needan toanalog
answer incoming
clock will internal
activated
handset
intercom
and appear configurations
calls the LCD via
onmanually. autoif provisioning
screen no user activity to the
is sensed
handset.
forconfigures Handset2 reboot
approximately
1-Color scheme or registration will also trigger
10 seconds.
It the wallpaper displayed on the handset LCD
the
If it base
is set station
to 1, thetohandset
deliver thewill stored
answerhandset
an incoming settings to
screen.
1 the handset.
internal
Note: It intercom If theeffect
will take parameter
call automatically
on all handsets without
that area warning
registered N
“auto_provision.custom.protect”
tone.
on the
registered same on base
the station.
same baseIt is only
works also
station. It set
if the
works to value
0 ifofthe
only the
1-Wallpaper1
(Disabled),
parameter the personalized handset settings will be
It enables or disables the handset to always turn on the is
value of
2-Wallpaper2 the “auto_provision.handset_configured.enable”
parameter
overridden,
If
setit to
is set to and
2, the
1 (Enabled). other handset
handset
“auto_provision.handset_configured.enable”will settings
answer an willincoming
be
is changed.
set to 1 If
3-Wallpaper3
backlight when it is in the charging state.
1 the parameter
internal
(Enabled). intercom “auto_provision.custom.protect”
call automatically and play a is set to 1
warning N
4-Wallpaper4
(Enabled),
tone. the personalized handset settings will not be
5-Wallpaper5
0-Disabled
overridden, but other handset settings will be changed.
It enables or disables the handset to always turn on the
Note:
Note: It
It works
will takeonly if the value of the parameter
1-Enabled
backlight when it effect
is not on all handsets
in the charging thatstate.are
0 “auto_provision.handset_configured.enable”
registered on the same base station. It worksisonly set to 1
if the N
(Enabled).
value
If it is of
setthe
0-Disabled to 0parameter
(Disabled), the backlight will be turned off
“auto_provision.handset_configured.enable”
after
It the handset
enables or disables is idle
thefor a period
handset to of time
turn is
onwhenthesetkeypad
to
it is1 in
(Enabled).
the charging
1-Enabled state.
light (digital key, # key, * key, TRAN key and Mute key)
1 N
when any key is pressed.
Note:
If It will
it is set to 0take effect onthe
(Disabled), all backlight
handsets willthatbe areturned
registered
off
on
afterthethe
0-Disabled same base isstation.
handset idle forItaworks
periodonly if thewhen
of time valueitofis the
parameter “auto_provision.handset_configured.enable”
not in the charging state. is
set to
1-Enabled1 (Enabled).
Note: It will take effect on all handsets that are registered
on theItsame
Note: baseeffect
will take station.
on Itallworks only that
handsets if theare value of the
registered
parameter
on the same “auto_provision.handset_configured.enable”
base station. It works only if the value of the is
 It enables or disables the handset to play a tone when
any key is pressed.
1 N
0-Disabled
It enables or disables the handset to play a tone when a
1-Enabled
user saves settings or places the handset in the charger
1 N
cradle.
Note: It will take effect on all handsets that are registered
on the same
0-Disabled
It enables or base station.
disables It works to
the handset only if the
play value
a tone of the
when
parameter “auto_provision.handset_configured.enable”
the capacity of the batteries is low. is
1 set to 1 (Enabled) and the silent mode is off. N
1-Enabled
0-Disabled
Note:
It enablesIt will
ortake effecta on
disables useralltohandsets that are registered
answer incoming calls by
on thethe
1-Enabled
lifting same base station.
handset from the It charger
works only if the
cradle value of the
without
1 parameter “auto_provision.handset_configured.enable” is N
having to press the off-hook key.
set to 1It (Enabled)
Note: and the
will take effect on silent mode is
all handsets off.are registered
that
onconfigures
the same base
0-Disabled
It station. Itofworks
the language only if the value of the
the handset.
parameter “auto_provision.handset_configured.enable” is
0 set to 1 (Enabled) and the silent mode is off. N
1-Enabled
For W56H:
0-English
Note:
1-French It worksthe
It configures if the
timehandset
format is forplaced in the charger
all registered handsets.
cradle and the parameter
2-German
1 “auto_provision.handset_configured.enable”
3-Italian is set to 1 N
0-12 Hour
(Enabled).
4-Polish
5-Portuguese
1-24
It Hour the date format for all registered handsets.
configures
6-Spanish
0 7-Turkish N
If it is set MMM
0-WWW to 0 (Hour
DD 12), the time will be displayed in 12-
8-Swedish
hour format with AM or PM specified.
9-Russian
1-DD-MMM-YY
It enables or disables the message key LED to flash red
If it is the
when set to 1 (Hour
handset 24), thea time
receives voicewill
mail.be displayed in 24-
1 For
hourW52H:
format (e.g., 2:00 PM displays as 14:00).
2-YYYY-MM-DD
0-English
0-Disabled
1-French
Note: It works only if the
the message
value of the
3-DD/MM/YYYY
1-Enabled
It enables or disables keyparameter
LED to flash red
2-German
“auto_provision.handset_configured.enable” is set to 1
when the handset misses a call.
1 3-Italian
(Enabled).
4-MM/DD/YY
Note: It will take effect on all handsets that are registered
4-Polish
on the same base station. It works only if the value of the
0-Disabled
5-Portuguese
Note:
5-DD MMM It works only if the value of the parameter
YYYY
parameter
It enables or “auto_provision.handset_configured.enable”
disables the eco mode to greatly reduce the is
6-Spanish
“auto_provision.handset_configured.enable” is set to 1
set to 1 (Enabled).
1-Enabled
transmission power and signal output when the phone is
0 7-Turkish
(Enabled).DD MMM
6-WWW N
in the talk mode.
8-Czech
Note: It will take effect on all handsets that are registered
9-Swedish
Note:
on the“WWW”
0-Disabled
It enables same or base
represents
disables station. the
It
the eco
abbreviation
works
mode+ only toifturn
ofvalue
the the week,
off theof the
10-Hebrew
“DD” represents a two-digit day, “MMM” represents theis
parameter
transmission “auto_provision.handset_configured.enable”
power when the phone is in the standby
0 11-Russian
first three letters of the month, “YYYY” represents a four- Y
set to
1-Enabled
mode. 1 (Enabled).
digit year, and “YY” represents a two-digit year.
Note:
It works It will
onlytake
if theeffect
valueonofallthehandsets
parameter that are registered
Note:
0-Disabled
It It works only if the
the value of the parameter
onenables
the same or base
disables station. repeater
It works mode
“auto_provision.handset_configured.enable” only if to theextend
isvalue
the
of1the
set to
0 “auto_provision.handset_configured.enable”
radio
parametercoverage of the base station.
“auto_provision.handset_configured.enable” is set to 1 is Y
(Enabled).
(Enabled).
1-Enabled
set to 1 (Enabled).
0-Disabled
It configures
If it is set to 1the access URL
(Enabled), there ofwill
webbenavigation
no signal bar file.
The web navigation bar file
interaction between the handset and the
1-Enabled should be compressed
base station,as a
Blank N
TAR file inofadvance
the color the signal andstrength
then place it to the
indicator onprovisioning
the idle
server. The compressed
screen displays in green.file (*.tar) contains the pictures of
format:
It deletes *.jpg,*.png,*.gif.
all web navigation You can use the file to custom
bar files.
the web navigation bar to display. For example, you can
Blank N
custom the logo.
Example:
web_setting.picture.delete = http://localhost/all
Example:
It configures the access URL of web theme file. You can
web_setting.picture.url
use the file to custom the = http://192.168.10.25/picture.tar
menu. For example, you can
Blank N
custom the color or size of font.

Example:
It configures the link to a page when clicking the logo on
web_setting.color.url
the = http://192.168.10.25/theme.cfg
web navigation bar.
http://www.yealink.com During the auto provisioning process, the IP DECT phone N
connects to the provisioning server “192.168.1.25”, and
downloads the web theme file “theme.cfg”.
 It configures the web title of the IP DECT phones.
Yealink W56P Phone N

It configures the model name on web navigation bar.

Yealink W56P It configures the custom outbound identity when placing N
an emergency call.
It configures the precedence of source of emergency
If using a TEL URI, for example, tel:+16045558000. The
outbound identities when placing an emergency call.
ELIN full URI is included in the P-Asserted-Identity (PAI) N
header (e.g., <tel:+16045558000>).
If it is set to ELIN, the outbound identity used in the P-
Asserted-Identity (PAI) header of the SIP INVITE request
If using a SIP URI, for example,
is taken from the network using an LLDP-MED
Blank sip:[email protected]. The full URI is included in N
Emergency
It configures Location Identifier
the IP address Number (ELIN).ofThe
the P-Asserted-Identity (PAI)orheader
domain name
and the will
the address
custom
emergency outbound
server identity
X to be configured
used for by
routing calls.
be replaced by the emergency server (e.g.,
“dialplan.emergency.custom_asserted_id” will be used if
<sip:[email protected]>).
the phone
Note: If thefails to getisthe
account LLDP-MED
registered ELIN value.
successfully or failed
Blank N
(the account
If using information
a 10-25 has been
digit number, configured),
for example, the
1234567890.
If it is set tocalls
emergency CUSTOM,
will bethe custom
dialed usingoutbound
the identity
following
The SIP URI constructed from the number and SIP server
configured
priority: SIPby “dialplan.emergency.custom_asserted_id”
server>emergency
(e.g., abc.com) is included in theserver; if the account (PAI)
P-Asserted-Identity is
will
not
It be used; ifthe
registered,
configures the
the value
port of of the server
emergency parameter
emergency will
serverbe X used.
to be used
5060 transport method the IP DECT phone
header (e.g., <sip:[email protected]>). N
“dialplan.emergency.custom_asserted_id”
for is left blank, the
usesrouting calls.
to communicate with the emergency server X.
LLDP-MED ELIN value will be used.
0-UDP
Note: If the obtained ELIN value is blank and no custom
0 outbound identity, the PAI header will not be included in N
1-TCP
the SIP INVITE request.

When X = 1, the default value 2-TLS

It configures the emergency number to use on your IP
is 911;
DECT phone so a caller can contact emergency services
3-DNS-NAPTR N
When X = 2-255, the default
in the local area when required.
value is Blank.
It configures the priority for the emergency servers to be
used.
0 N
The digits are separated by commas. The servers to be
used in the order listed (left to right).
It configures the codec for multicast paging.
The IP DECT phone tries to send the INVITE request to
G722 N
the emergency server with higher priority. If the
Example:
emergency server
multicast.codec with higher priority does not respond
= G722
correctly
It enablestoorthe INVITE,
disables thethen the phone
IP DECT phonetries to make
to handle the
the
call using the emergency server with lower priority,
incoming multicast paging calls when there is an active and
1 so forth. The IP phone N
multicast paging call ontries
thetoIP send
DECTthe INVITE request to
phone.
each emergency server for three times.
0-Disabled
It configures the priority of the voice call (a normal
Example:
phone call rather than a multicast paging call) in
31 dialplan.emergency.1.server_priority = 2, 1, 3 N
1-Enabled
progress.
It means
1 is the IP DECT
the highest phone
priority, 31 issends the INVITE
the lowest priority.request to
the
If it emergency
is set to 0the server
(Disabled),2 first. If the
thedisplayed emergency
IP DECT phone server 2
It configures label to be on thewillLCDignore
screen
does not
the incoming respond correctly
multicast to
paging the INVITE,
calls when then tries to
0-Disabled
when receiving the multicast paging calls. there is an
Blank make N
1-1 the
active call using
multicast the emergency
paging call on the IP server
DECT1.phone.
If the
emergency
2-2 server 1 does not respond correctly to the
Example:
INVITE,
If then
to 1tries to make the IP call using the will
emergency
It it
3-3 is set (Enabled),
channelthe
multicast.listen_address.1.label
configures the of the DECT phone
=multicast
Paging1 pagingreceive
group
server
the 3. The IP
incoming DECT phone
multicast paging tries towith
call send a the INVITE
higher priority
4-4
in the paging list.
0 request
and to each emergency server for three times. N
5-5 ignore that with a lower priority.
6-6
If it is set to 0, all the Yealink IP DECT phones running
Note: If the IP address of the emergency server with
7-7
firmware
It configures version
the 80 or prior
multicast or Yealink
address and IP DECT phones
port
higher priority has not been configured, the number
emergency that
8-8
listens to channel
the IP phone listens0 or
to.third-party available devices (e.g.,
Blank server with lower priority will be used. If the account is N
9-9
Cisco IP phones) in the paging group can receive the RTP
registered successfully or failed (the account information
10-10
Example:
stream.
has been configured), the emergency calls will be dialed
11-11
multicast.listen_address.1.ip_address
It configures
using the IP address
the following priority: and port = 224.5.6.20:10008
number
SIP server>emergency of the
12-12
If it is set to 1 to 25, the Polycom or Yealink IP DECT
multicast
server; paging
if the group
account in the
is not paging list.
registered, theItemergency
will be
Blank 13-13
Note: The valid multicast IP addresses range N
phones
displayed
server
preconfigured
will on
be the
to listen
LCD screen
used. when to the
placing thefrom
channel can
multicast
14-14
224.0.0.0
receive call.
paging thetoRTP
239.255.255.255.
stream.
15-15
16-16
It it is set to 26 to 30, the Yealink IP DECT phones
Example:
17-17
preconfigured to listen to the channel can
multicast.paging_address.1.ip_address receive the
= 224.5.6.20:10008
18-18
RTP stream.
multicast.paging_address.2.ip_address = 224.1.6.25:1001
19-19
20-20
Example:
Note: The valid multicast IP addresses range from
 It configures the name of the multicast paging group to
be displayed in the paging list. It will be displayed on the
Blank N
LCD screen when placing the multicast paging calls.

Example:
It configures the channel that the IP DECT phone listens
multicast.paging_address.1.label = Product
to.
0 N
If it is set to 0, the IP DECT phone can receive an RTP
stream
It of thethe
configures pre-configured
volume of the multicast
speaker address from the
when receiving
IP
theDECT phones
multicast running
paging calls.firmware version 80 or prior,
0 N
from the IP DECT phones listen to the channel 0, or from
the
If it available
is set to 0,third-party
the currentdevices
volume(e.g., Cisco
of the IP phones).
speaker takes
effect.
It enables Theor volume of the speaker
disables IP DECT can
phonebe to
adjusted
always use
If it speaker
is set to
manually
the 1 to
in advance
as the25,audio
the
whenIPdevice
phone can is
the phone
when receive
duringanathe
receiving RTP
call. You
0 stream of the pre-configured multicast address on the N
can also adjust
multicast paging calls.the volume of the speaker during the
channelcall.
paging 1 to 25 respectively from Yealink or Polycom IP
DECT
0-Disabled
It enablesphones.
or disables the Watch Dog feature.
If it is set to 1 to 15, the configured volume takes effect
1 It
andit isthe
setcurrent
to 26 to 30, theofIPthe
volume phone can will
speaker receive the RTP
be ignored. N
1-Enabled
0-Disabled
stream
You areofnottheallowed
pre-configured
to adjust multicast
the volume address
of theon the
speaker
channel
during
If 26
the
it is set
1-Enabled to 30 respectively
topaging from Yealink
call. the engaged
0 (Disabled), audioIP device
DECT will
phones.
be used when receiving the multicast paging calls.
Example:
If it is set to 1 (Enabled), the IP DECT phone will reboot
Example:
multicast.listen_address.1.volume
Note: If there when
automatically is an active = 1phone,
call onisthe
the system broken the call will
down.
multicast.listen_address.1.channel
not be interrupted by the incoming = multicast
2 paging calls
even if the value of this parameter is set to 1. But there is
a warning tone from the speaker.
 Web User Interface Handset User Interface Further Reference

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>DHCP Hostname

OK->Settings->System Settings-
Network->Basic->IPv4 Config- >Network (default PIN: 0000)->Basic-
Yealink IP DECT Phones Administrator Guide
>Static DNS >IPv4->IP Address Type: DHCP->DNS
Type: Manual

/ /

/ /

/ /

OK->Settings->System Settings-
Network->Advanced->VLAN-
>Network (default PIN: 0000)->VLAN- Yealink IP DECT Phones Administrator Guide
>WAN Port->Active
>VLAN Parameter->Status

OK->Settings->System Settings-
Network->Advanced->VLAN- >Network (default PIN: 0000)->VLAN-
Yealink IP DECT Phones Administrator Guide
>WAN Port->VID(1-4094) >VLAN Parameter->Status: Enabled-
>VID
OK->Settings->System Settings-
Network->Advanced->VLAN- >Network (default PIN: 0000)->VLAN-
Yealink IP DECT Phones Administrator Guide
>WAN Port->Priority >VLAN Parameter->Status: Enabled-
>Priority

OK->Settings->System Settings-
Network->Advanced->VLAN-
>Network (default PIN: 0000)->VLAN- Yealink IP DECT Phones Administrator Guide
>DHCP VLAN->Active
>VLAN DHCP->Status

OK->Settings->System Settings-
Network->Advanced->VLAN- >Network (default PIN: 0000)->VLAN-
Yealink IP DECT Phones Administrator Guide
>DHCP VLAN->Option (1-255) >VLAN DHCP->Status: Enabled-
>Options

/ / Yealink IP DECT Phones Administrator Guide

Network->Advanced->Web Server-
/ Yealink IP DECT Phones Administrator Guide
> HTTPS
Network->Advanced->Web Server-
/ Yealink IP DECT Phones Administrator Guide
> HTTP

Network->Advanced->Web Server-
/ Yealink IP DECT Phones Administrator Guide
>HTTP Port(1~65535)

Network->Advanced->Web Server-
/ Yealink IP DECT Phones Administrator Guide
>HTTPS Port(1~65535)

/ / Yealink IP DECT Phones Administrator Guide

Network->Advanced->Local RTP
/ Yealink IP DECT Phones Administrator Guide
Port->Max RTP Port(1~65535)

Network->Advanced->Local RTP
/ Yealink IP DECT Phones Administrator Guide
Port->Min RTP Port(1~65535)

Network->Advanced->Voice QoS
/ Yealink IP DECT Phones Administrator Guide
(0-63)

Network->Advanced->SIP QoS (0-

/ Yealink IP DECT Phones Administrator Guide
63)

Network->NAT->Nat Manual-
Yealink IP DECT Phones Administrator Guide
>Active

Network->NAT->Nat Manual->IP
Yealink IP DECT Phones Administrator Guide
Address

Network->NAT->STUN->Active Yealink IP DECT Phones Administrator Guide

Network->NAT->STUN->STUN
Yealink IP DECT Phones Administrator Guide
Port (1024~65000)

Network->NAT->STUN->STUN
Yealink IP DECT Phones Administrator Guide
Server

Network->NAT->TURN->Active Yealink IP DECT Phones Administrator Guide

Network->NAT->TURN->TURN
Yealink IP DECT Phones Administrator Guide
Port (1~65535)

Network->NAT->TURN->TURN
Port (1~65535)
Network->NAT->TURN->User
Yealink IP DECT Phones Administrator Guide
Name

Network->NAT->TURN->Password Yealink IP DECT Phones Administrator Guide

Network->NAT->ICE->Active Yealink IP DECT Phones Administrator Guide

Network->Advanced->802.1x-
/ Yealink IP DECT Phones Administrator Guide
>802.1x Mode

Network->Advanced->802.1x-
Yealink IP DECT Phones Administrator Guide
>Provisioning Mode

Network->Advanced->802.1x-
Yealink IP DECT Phones Administrator Guide
>Anonymous Identity

Network->Advanced->802.1x-
/ Yealink IP DECT Phones Administrator Guide
>Identity

Network->Advanced->802.1x-
/ Yealink IP DECT Phones Administrator Guide
>MD5 Password

Network->Advanced->802.1x->CA
/ Yealink IP DECT Phones Administrator Guide
Certificate

Network->Advanced->802.1x-
/ Yealink IP DECT Phones Administrator Guide
>Device Certificates

Network-> Advanced->VPN-
/ Yealink IP DECT Phones Administrator Guide
>Active

Network->Advanced->VPN-
/ Yealink IP DECT Phones Administrator Guide
>Upload VPN Config

Network->Advanced->LLDP-
/ Yealink IP DECT Phones Administrator Guide
>Active

Network->Advanced->LLDP-
/ Yealink IP DECT Phones Administrator Guide
>Packet Interval (1~3600s)

Settings->Configuration->Syslog-
/ Yealink IP DECT Phones Administrator Guide
>Syslog Server

Settings->Configuration->Local
/ Yealink IP DECT Phones Administrator Guide
Log->Enable Local Log
Settings->Configuration->Local
/ Yealink IP DECT Phones Administrator Guide
Log->Local Log Level

Settings->Configuration->Local
Log->Max Log File Size (256- / Yealink IP DECT Phones Administrator Guide
1024KB)

Settings->Configuration->Syslog-
/ Yealink IP DECT Phones Administrator Guide
>Enable Syslog

Settings->Configuration->Syslog-
/ Yealink IP DECT Phones Administrator Guide
>Syslog Server->Port

Settings->Configuration->Syslog-
/ Yealink IP DECT Phones Administrator Guide
>Syslog Level

Settings->Configuration->Syslog-
/ Yealink IP DECT Phones Administrator Guide
>Syslog Transport Type

Settings->Configuration->Syslog-
/ Yealink IP DECT Phones Administrator Guide
>Syslog Prepend MAC

Settings->Configuration->Syslog-
/ Yealink IP DECT Phones Administrator Guide
>Syslog Facility

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Settings->Auto Provision-
/ Yealink IP Phones Auto Provisioning Guide
>Repeatedly
Settings->Auto Provision-
/ Yealink IP Phones Auto Provisioning Guide
>Interval(Minutes)

Settings->Auto Provision->Weekly / Yealink IP Phones Auto Provisioning Guide

Settings->Auto Provision->Weekly
Yealink IP DECT Phones Administrator Guide
Upgrade Interval(0~12week)

Settings->Auto Provision-
Yealink IP DECT Phones Administrator Guide
>Inactivity Time Expire(0~120min)

Settings->Auto Provision->Day of
/ Yealink IP Phones Auto Provisioning Guide
Week

Settings->Auto Provision->Time / Yealink IP Phones Auto Provisioning Guide

Settings->Auto Provision->Time / Yealink IP Phones Auto Provisioning Guide

Settings->Auto Provision->Flexible
Yealink IP DECT Phones Administrator Guide
Auto Provision

Settings->Auto Provision->Flexible
Yealink IP DECT Phones Administrator Guide
Interval Days

Settings->Auto Provision->Flexible
Yealink IP DECT Phones Administrator Guide
Time

Settings->Auto Provision->Flexible
Yealink IP DECT Phones Administrator Guide
Time

Settings->Auto Provision->Server
/ Yealink IP Phones Auto Provisioning Guide
URL

Settings->Auto Provision->User
/ Yealink IP Phones Auto Provisioning Guide
Name

Settings->Auto Provision-
/ Yealink IP Phones Auto Provisioning Guide
>Password

Settings->Auto Provision->DHCP
/ Yealink IP Phones Auto Provisioning Guide
Active

Settings->Auto Provision->Custom
/ Yealink IP Phones Auto Provisioning Guide
Option(128~254)
/ /

Settings->Auto Provision->DHCP
/ Yealink Configuration Encryption Tool User Guide
Option Value

Yealink IP DECT Phones Administrator Guide

Yealink IP DECT Phones Administrator Guide

/ / Yealink Configuration Encryption Tool User Guide

Settings->Auto Provision-
/ Yealink Configuration Encryption Tool User Guide
>Common AES Key

Settings->Auto Provision->MAC-
/ Yealink IP DECT Phones Administrator Guide
Oriented AES Key

Settings->Configuration->Export
/ Yealink IP DECT Phones Administrator Guide
or Import Configuration

/ /
Settings->Auto Provision->Power
/
On

Settings->Auto Provision->PNP
Yealink IP Phones Auto Provisioning Guide
Active

/ /

/ / Yealink IP DECT Phones Administrator Guide

Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Settings->Auto Provision-
/
>Attempt Expired Time(s)

/ /

/ / Yealink IP Phones Auto Provisioning Guide

/ / Yealink IP Phones Auto Provisioning Guide

/ / Yealink IP Phones Auto Provisioning Guide

/ / Yealink IP Phones Auto Provisioning Guide

/ / Yealink IP Phones Auto Provisioning Guide

/ / Yealink IP Phones Auto Provisioning Guide

/ /
/ /

Features->Transfer->Semi-
/ Yealink IP DECT Phones Administrator Guide
Attended Transfer

Features->Transfer->Blind Transfer
/ Yealink IP DECT Phones Administrator Guide
On Hook

Features->Transfer->Attended
/ Yealink IP DECT Phones Administrator Guide
Transfer On Hook

/ / Yealink IP DECT Phones Administrator Guide

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Suppress DTMF Display

/ / Yealink IP DECT Phones Administrator Guide

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Suppress DTMF Display Delay

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Diversion/History-Info

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Fwd International

Settings->Preference->Language / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Settings->Dial Plan->Area Code-

/ Yealink IP DECT Phones Administrator Guide
>Code

Settings->Dial Plan->Area Code-

/ Yealink IP DECT Phones Administrator Guide
>Min Length (1-15)

Settings->Dial Plan->Area Code-

/ Yealink IP DECT Phones Administrator Guide
>Max Length (1-15)
Settings->Dial Plan->Area Code-
/ Yealink IP DECT Phones Administrator Guide
>Account

Settings->Dial Plan->Block Out-

/ Yealink IP DECT Phones Administrator Guide
>BlockOut NumberX

Settings->Dial Plan->Block Out-

/ Yealink IP DECT Phones Administrator Guide
>Account

Settings->Dial Plan->Dial Now-

/ Yealink IP DECT Phones Administrator Guide
>Rule

Settings->Dial Plan->Dial Now-

/ Yealink IP DECT Phones Administrator Guide
>Account

Settings->Dial Plan->Replace Rule-

/ Yealink IP DECT Phones Administrator Guide
>Prefix

Settings->Dial Plan->Replace Rule-

/ Yealink IP DECT Phones Administrator Guide
>Replace

Settings->Dial Plan->Replace Rule-

/ Yealink IP DECT Phones Administrator Guide
>Account

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Time Out for Dial Now Rule

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Network->Advanced->Registration
Random->Registration Random /
(0~60s)

/ /

Yealink IP Phones BroadSoft UC-One Environment

/ /
Guide

Applications->Broadsoft XSI->XSI
Account->Allow SIP Authentication
/ Yealink IP DECT Phones Administrator Guide
for XSI (if bw.enable=1 and
bw.xsi.enable=1)

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Reserve # in User Name
/ /

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Use Outbound Proxy In Dialog

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>RFC 2543 Hold

Settings->SIP->Local SIP Port / Yealink IP DECT Phones Administrator Guide

Settings->SIP->TLS SIP Port / Yealink IP DECT Phones Administrator Guide

Settings->SIP->SIP Session Timer

/ Yealink IP DECT Phones Administrator Guide
T1 (0.5~10s)

Settings->SIP->SIP Session Timer

/ Yealink IP DECT Phones Administrator Guide
T2 (2~40s)

Settings->SIP->SIP Session Timer

/ Yealink IP DECT Phones Administrator Guide
T4 (2.5~60s)

/ /

/ /

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Accept SIP Trust Server Only

Yealink IP Phones BroadSoft UC-One Environment

/ /
Guide

Features->General Information- OK->Call Features->Call Waiting-

Yealink IP DECT Phones Administrator Guide
>Call Waiting >Status

Features->Audio->Call Waiting OK->Call Features->Call Waiting-

Yealink IP DECT Phones Administrator Guide
Tone >Tone

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Call Waiting On Code

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Call Waiting Off Code
Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Return Code When DND

Feature->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Allow IP Call

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Return Code When Refuse

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Auto-Logout Time(1~1000min)

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Display Method on Dialing

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>180 Ring Workaround

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Reboot in Talking

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Features->Phone Lock-
/ Yealink IP DECT Phones Administrator Guide
>Emergency

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Save Call Log

/ / Yealink IP DECT Phones Administrator Guide

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>End Call On Hook

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Voice Mail Tone

Features->General Information-
Yealink IP DECT Phones Administrator Guide
>Key As Send

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Call Number Filter
Features->Audio->Ringer Device
Yealink IP DECT Phones Administrator Guide
for Headset

/ /

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Busy Tone Delay (Seconds)

Settings->TR069->Enable TR069 / Yealink IP DECT Phones Administrator Guide

Settings->TR069->ACS Username / Yealink IP DECT Phones Administrator Guide

Settings->TR069->ACS Password / Yealink IP DECT Phones Administrator Guide

Settings->TR069->ACS URL / Yealink IP DECT Phones Administrator Guide

Settings->TR069->Connection
/ Yealink IP DECT Phones Administrator Guide
Request Username

Settings->TR069->Connection
/ Yealink IP DECT Phones Administrator Guide
Request Password

Settings->TR069->Enable Periodic
/ Yealink IP DECT Phones Administrator Guide
Inform

Settings->TR069->Periodic Inform
/ Yealink IP DECT Phones Administrator Guide
Interval (seconds)

/ / Yealink IP Phones Auto Provisioning Guide

Settings->Upgrade->Select and
/ Yealink IP DECT Phones Administrator Guide
Upgrade Firmware

/ /

/ /

/ /
/ / Yealink IP DECT Phones Administrator Guide

Security->Password / Yealink IP DECT Phones Administrator Guide

Security->Trusted Certificates-
/ Yealink IP DECT Phones Administrator Guide
>Only Accept Trusted Certificates

Security->Trusted Certificates->CA
/ Yealink IP DECT Phones Administrator Guide
Certificates

Security->Server Certificates-
/ Yealink IP DECT Phones Administrator Guide
>Device Certificates

Security->Trusted Certificates-
/ Yealink IP DECT Phones Administrator Guide
>Common Name Validation

OK->Settings->System Settings-
Security->Base PIN->Base Unit PIN Yealink IP DECT Phones Administrator Guide
>Change Base PIN

Yealink IP DECT phones Configuration Guide for

/ /
User Access Level

Yealink IP DECT phones Configuration Guide for

/ /
User Access Level

Yealink IP DECT phones Configuration Guide for

/ /
User Access Level

Security->Trusted Certificates-
/ Yealink IP DECT Phones Administrator Guide
>Import Trusted Certificate

/ / Yealink IP DECT Phones Administrator Guide

Security->Server Certificates->Load
/ Yealink IP DECT Phones Administrator Guide
server cer file

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Settings->Configuration->Import
/ Yealink IP DECT Phones Administrator Guide
Factory Config
 OK->Settings->Telephony->Caller
/ Yealink IP DECT Phones Administrator Guide
Blacklist

Settings->Voice->Echo
/ Yealink IP DECT Phones Administrator Guide
Cancellation->VAD

Settings->Voice->Echo
/ Yealink IP DECT Phones Administrator Guide
Cancellation->CNG

Settings->Voice->JITTER BUFFER-
/ Yealink IP DECT Phones Administrator Guide
>Type

Settings->Voice->JITTER BUFFER-
/ Yealink IP DECT Phones Administrator Guide
>Min Delay

Settings->Voice->JITTER BUFFER-
/ Yealink IP DECT Phones Administrator Guide
>Max Delay

Settings->Voice->JITTER BUFFER-
/ Yealink IP DECT Phones Administrator Guide
>Normal

Settings->Tones->Select country / Yealink IP DECT Phones Administrator Guide

Settings->Tones->Dial / Yealink IP DECT Phones Administrator Guide

Settings->Tones->Ring back / Yealink IP DECT Phones Administrator Guide

Settings->Tones->Busy / Yealink IP DECT Phones Administrator Guide

Settings->Tones->Call Waiting / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Setting->Call Display->Display
/ Yealink IP DECT Phones Administrator Guide
Called Party Information

Setting->Call Display->Call
/ Yealink IP DECT Phones Administrator Guide
Information Display Method

Features->Power LED->Common
/ Yealink IP DECT Phones Administrator Guide
Power Light On
Features->Power LED->Ringing
/ Yealink IP DECT Phones Administrator Guide
Power Light Flash

Features->Power LED->Voice/Text
/ Yealink IP DECT Phones Administrator Guide
Mail Power Light Flash

Features->Power LED->MissCall
/ Yealink IP DECT Phones Administrator Guide
Power Light Flash

OK->Settings->Display->Notification
/ Yealink IP DECT Phones Administrator Guide
Light->Voice Mail

/ / Yealink IP DECT Phones Administrator Guide

Directory->Remote Phone Book->

/ Yealink IP DECT Phones Administrator Guide
RemoteURL

/ / Yealink IP DECT Phones Administrator Guide

Directory->Remote Phone Book-

/ Yealink IP DECT Phones Administrator Guide
>Display Name

Directory->Remote Phone Book-

/ Yealink IP DECT Phones Administrator Guide
>Incoming/Outgoing Call Lookup

Directory->Remote Phone Book-

/ Yealink IP DECT Phones Administrator Guide
>Update Time Interval(Seconds)

Directory->LDAP->Enable LDAP / LDAP Phonebook on Yealink IP Phones

Directory->LDAP->LDAP Name
/ LDAP Phonebook on Yealink IP Phones
Filter

Directory->LDAP->LDAP Number
/ LDAP Phonebook on Yealink IP Phones
Filter

Directory->LDAP->Server Address / LDAP Phonebook on Yealink IP Phones

Directory->LDAP->Port / LDAP Phonebook on Yealink IP Phones

Directory->LDAP->Base / LDAP Phonebook on Yealink IP Phones

Directory->LDAP->Username / LDAP Phonebook on Yealink IP Phones

Directory->LDAP->Password / LDAP Phonebook on Yealink IP Phones

Directory->LDAP->Max Hits
/ LDAP Phonebook on Yealink IP Phones
(1~32000)

Directory->LDAP->LDAP Name
/ LDAP Phonebook on Yealink IP Phones
Attributes

Directory->LDAP->LDAP Number
/ LDAP Phonebook on Yealink IP Phones
Attributes

Directory->LDAP->LDAP Display
/ LDAP Phonebook on Yealink IP Phones
Name

Directory->LDAP->Protocol / LDAP Phonebook on Yealink IP Phones

Directory->LDAP->LDAP Lookup
/ LDAP Phonebook on Yealink IP Phones
For Incoming Call

Directory->LDAP->LDAP Sorting
/ LDAP Phonebook on Yealink IP Phones
Results

Directory->LDAP->LDAP TLS Mode / LDAP Phonebook on Yealink IP Phones

Directory->LDAP->LDAP Lookup
/ Yealink IP DECT Phones Administrator Guide
For Callout

/ / Server Redundancy on Yealink IP Phones

/ /

/ /

/ /

Settings->Voice Monitoring-
/ Yealink IP DECT Phones Administrator Guide
>Voice RTCP-XR Report
Settings->Voice Monitoring->VQ
/ Yealink IP DECT Phones Administrator Guide
RTCP-XR Session Report

Settings->Voice Monitoring-
/ Yealink IP DECT Phones Administrator Guide
>Display Report options on Web

Settings->Voice Monitoring->VQ
/ Yealink IP DECT Phones Administrator Guide
RTCP-XR Interval Report

Settings->Voice Monitoring-
/ Yealink IP DECT Phones Administrator Guide
>Period for Interval Report

Settings->Voice Monitoring-
/ Yealink IP DECT Phones Administrator Guide
>Warning threshold for Moslq

Settings->Voice Monitoring-
/ Yealink IP DECT Phones Administrator Guide
>Critical threshold for Moslq

Settings->Voice Monitoring-
/ Yealink IP DECT Phones Administrator Guide
>Warning threshold for Delay

Settings->Voice Monitoring-
/ Yealink IP DECT Phones Administrator Guide
>Critical threshold for Delay

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Server Redundancy on Yealink IP Phones

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Directory->Setting->Recent Call In
/ Yealink IP DECT Phones Administrator Guide
Dialing

Directory->Setting->Search Source
/ Yealink IP DECT Phones Administrator Guide
List In Dialing

/ / Yealink IP DECT Phones Administrator Guide

Directory->Local Directory-
/ Yealink IP DECT Phones Administrator Guide
>Import Contacts

Account->Number Assignment- OK->Settings->Telephony->Incoming

Yealink IP DECT Phones Administrator Guide
>Incoming lines Lines (Default PIN:0000)->HandsetX

Account->Number Assignment-
/ Yealink IP DECT Phones Administrator Guide
>Outgoing lines
Account->Number Assignment- OK->Settings->Telephony->Default
Yealink IP DECT Phones Administrator Guide
>Outgoing lines->Default Line

Account->Handset Name-
OK->Settings->Handset Name Yealink IP DECT Phones Administrator Guide
>Handset X

Settomgs->Upgrade->Select and
/ Upgrading Handset Firmware
Upgrade Hantset Firmware

Settings->Upgrade->Select and
Yealink IP DECT Phones Administrator Guide
Upgrade Handset Firmware

Settings->Upgrade->Select and
Yealink IP DECT Phones Administrator Guide
Upgrade Handset Firmware

Settings->Upgrade->Select and
Yealink IP DECT Phones Administrator Guide
Upgrade Handset Firmware

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

OK->Settings->Telephony->Auto
/ Yealink IP DECT Phones Administrator Guide
Intercom

/ OK->Settings->Display->Screen Saver Yealink IP DECT Phones Administrator Guide

OK->Settings->Display->Color
/ Yealink IP DECT Phones Administrator Guide
Schemes

/ OK->Setting->Display->Wallpaper Yealink IP DECT Phones Administrator Guide

OK->Settings->Display->Display
/ Yealink IP DECT Phones Administrator Guide
Backlight->In Charger

OK->Settings->Display->Display
/ Yealink IP DECT Phones Administrator Guide
Backlight->Out Of Charger

OK->Settings->Display->Keypad
/ Yealink IP DECT Phones Administrator Guide
Light
 OK->Settings->Audio->Advisory
/ Yealink IP DECT Phones Administrator Guide
Tones->Keypad Tone

OK->Settings->Audio->Advisory
/ Yealink IP DECT Phones Administrator Guide
Tones->Confirmation

OK->Settings->Audio->Advisory
/ Yealink IP DECT Phones Administrator Guide
Tones->Low Battery

OK->Settings->Telephony->Auto
/ Yealink IP DECT Phones Administrator Guide
Answer

/ OK->Settings->Language Yealink IP DECT Phones Administrator Guide

Settings->Time & Date->Time

OK->Settings->Display->Time Format Yealink IP DECT Phones Administrator Guide
Format

Settings->Time & Date->Date

OK->Settings->Display->Date Format Yealink IP DECT Phones Administrator Guide
Format

OK->Settings->Display->Notification
/ Yealink IP DECT Phones Administrator Guide
Light->Voice Mail

OK->Settings->Display->Notification
/ Yealink IP DECT Phones Administrator Guide
Light->Missed Call

OK->Settings->System Settings->Eco
/
Mode

OK->Settings->System Settings->Eco
/
Mode+

OK->Settings->System Settings-
/
>Repeater Mode

/ /

/ /

/ /

/ /
/ /

/ /

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Features->General Information-
/ Yealink IP DECT Phones Administrator Guide
>Multicast Codec

Directory->Multicast IP->Paging
/ Yealink IP DECT Phones Administrator Guide
Priority Active

Directory->Multicast IP->Paging
/ Yealink IP DECT Phones Administrator Guide
Barge

Directory->Multicast IP->Multicast
/ Yealink IP DECT Phones Administrator Guide
Listening->Label

Directory->Multicast IP->Paging
/ Yealink IP DECT Phones Administrator Guide
List->Channel

Directory->Multicast IP->Multicast
/ Yealink IP DECT Phones Administrator Guide
Listening->Listening Address

Directory->Multicast IP->Paging
/ Yealink IP DECT Phones Administrator Guide
List->Paging Address
Directory->Multicast IP->Paging
/ Yealink IP DECT Phones Administrator Guide
List->Label

Directory->Multicast IP->Multicast
/ Yealink IP DECT Phones Administrator Guide
Listening->Channel

/ / Yealink IP DECT Phones Administrator Guide

/ / Yealink IP DECT Phones Administrator Guide

Settings->Preference->Watch Dog / Yealink IP DECT Phones Administrator Guide

Time Zone

-11
-10
-9:30
-9
-8
-7

-6

-5
-4:30

-4

-3:30
-3
-2:30
-2
-1

+1

+2

+3
+3:30
+4
+4:30
+5
+5:30
+5:45
+6
+6:30
+7
+8
+8:45
+9
+9:30
+10
+10:30
+11
+11:30
 +12
+12:45
+13
+13:30
+14
 Time Zone Name

Samoa
United States-Hawaii-Aleutian, United States-Alaska-Aleutian
French Polynesia
United States-Alaska Time
Canada(Vancouver,Whitehorse), Mexico(Tijuana,Mexicali), United States-Pacific Time
Canada(Edmonton,Calgary), Mexico(Mazatlan,Chihuahua), United States-MST no DST, United States-Mountain
Time
Canada-Manitoba(Winnipeg), Chile(Easter Islands), Mexico(Mexico City,Acapulco), United States-Central Time

Bahamas(Nassau), Canada(Montreal,Ottawa,Quebec), Cuba(Havana), United States-Eastern Time

Venezuela(Caracas)
Canada(Halifax,Saint John), Chile(Santiago), Paraguay(Asuncion), United Kingdom-Bermuda(Bermuda), United
Kingdom(Falkland Islands), Trinidad&Tobago
Canada-New Foundland(St.Johns)
Argentina(Buenos Aires), Brazil(DST), Brazil(no DST), Denmark-Greenland(Nuuk)
Newfoundland and Labrador
Brazil(no DST)
Portugal(Azores)

Denmark-Faroe Islands(Torshavn), GMT, Greenland, Ireland(Dublin), Morocco, Portugal(Lisboa,Porto,Funchal), Spain-Canary Islands(Las Pa

Albania(Tirane), Austria(Vienna), Belgium(Brussels),Caicos, Chad, Croatia(Zagreb), Czech Republic(Prague),

Denmark(Kopenhagen), France(Paris), Germany(Berlin), Hungary(Budapest), Italy(Rome),
Luxembourg(Luxembourg), Macedonia(Skopje), Namibia(Windhoek), Netherlands(Amsterdam), Spain(Madrid)

Estonia(Tallinn), Finland(Helsinki), Gaza Strip(Gaza), Greece(Athens), Israel(Tel Aviv), Jordan(Amman), Latvia(Riga),

Lebanon(Beirut), Moldova(Kishinev), Romania(Bucharest), Russia(Kaliningrad), Syria(Damascus), Turkey(Ankara),
Ukraine(Kyiv, Odessa)
East Africa Time, Iraq(Baghdad), Russia(Moscow)
Iran(Teheran)
Armenia(Yerevan), Azerbaijan(Baku), Georgia(Tbilisi), Kazakhstan(Aktau), Russia(Samara)
Afghanistan(Kabul)
Kazakhstan(Aqtobe), Kyrgyzstan(Bishkek), Pakistan(Islamabad), Russia(Chelyabinsk)
India(Calcutta)
Nepal(Katmandu)
Kazakhstan(Astana, Almaty), Russia(Novosibirsk,Omsk)
Myanmar(Naypyitaw)
Russia(Krasnoyarsk), Thailand(Bangkok)
Australia(Perth), China(Beijing), Russia(Irkutsk, Ulan-Ude), Singapore(Singapore)
Eucla
Japan(Tokyo), Korea(Seoul), Russia(Yakutsk,Chita)
Australia(Adelaide), Australia(Darwin)
Australia(Brisbane), Australia(Hobart), Australia(Sydney,Melboume,Canberra), Russia(Vladivostok)
Australia(Lord Howe Islands)
New Caledonia(Noumea), Russia(Srednekolymsk Time)
Norfolk Island
New Zealand(Wellington,Auckland), Russia(Kamchatka Time)
New Zealand(Chatham Islands)
Tonga(Nukualofa)
Chatham Islands
Kiribati
You may need to know the differences between the parameters started with “static.” and other common parameters:
- All static settings have no priority. They take effect no matter what method (web user interface or handset user interface or
configuration files) you are using for provisioning.
- All static settings are never be saved to <MAC>-local.cfg file.
- All static settings are not affected by the overwrite mode. That is, the actual values will not be changed even if you delete the
parameters associated with static settings, or you clear the values of the parameters associated with static settings in the configuration
files.

Function

Network
 Security

Certificates

3-level Permissions

WEB HTTP(S)

Lang

Log
 Log

Autoprovision
 TR069

Watch Dog

Custom Configuration

Custom Factory Configuration 

Other
w the differences between the parameters started with “static.” and other common parameters:
e no priority. They take effect no matter what method (web user interface or handset user interface or
u are using for provisioning.
never be saved to <MAC>-local.cfg file.
not affected by the overwrite mode. That is, the actual values will not be changed even if you delete the
with static settings, or you clear the values of the parameters associated with static settings in the configuration

Parameter

static.network.attempt_expired_time

static.network.dhcp_host_name

static.network.static_dns_enable

static.network.ipv6_static_dns_enable

static.network.dns.ttl_enable

static.network.dhcp.server_mac1

static.network.dhcp.server_mac2

static.network.mtu_value

static.network.dhcp.option60type

static.network.vlan.internet_port_enable

static.network.vlan.internet_port_vid
static.network.vlan.internet_port_priority
static.network.vlan.dhcp_enable
static.network.vlan.dhcp_option
static.network.vlan.vlan_change.enable
static.network.port.http
static.network.port.https
static.network.qos.rtptos
static.network.qos.signaltos
static.network.802_1x.mode
static.network.802_1x.anonymous_identity
static.network.802_1x.eap_fast_provision_mode
static.network.802_1x.identity
static.network.802_1x.md5_password
static.network.802_1x.root_cert_url
static.network.802_1x.client_cert_url
static.network.vpn_enable
static.openvpn.url
static.network.lldp.enable
static.network.lldp.packet_interval
static.network.port.max_rtpport
static.network.port.min_rtpport
static.network.ip_address_mode
static.network.ipv6_prefix
static.network.ipv6_internet_port.type
static.network.ipv6_internet_port.ip
static.network.ipv6_internet_port.gateway
static.network.ipv6_primary_dns
static.network.ipv6_secondary_dns
static.network.internet_port.type
static.network.internet_port.ip
static.network.internet_port.mask
static.network.internet_port.gateway
static.network.primary_dns
static.network.secondary_dns
static.security.trust_certificates
static.security.user_name.user
static.security.user_name.admin
static.security.user_name.var
static.security.user_password
static.phone_setting.reserve_certs_enable
static.security.ca_cert
static.security.dev_cert
static.security.cn_validation
static.trusted_certificates.url
static.trusted_certificates.delete
static.server_certificates.url
static.server_certificates.delete
static.web_item_level.url
static.security.var_enable
static.security.default_access_level
static.wui.https_enable
static.wui.http_enable
static.lang.wui
static.local_log.enable
static.local_log.level
static.local_log.max_file_size
static.syslog.enable
static.syslog.level
static.syslog.server
static.syslog.server_port 
static.syslog.transport_type
static.syslog.prepend_mac_address.enable
static.syslog.facility
static.auto_provision.local_log.backup.enable
static.auto_provision.local_log.backup.path
static.auto_provision.local_log.backup.upload_period
static.auto_provision.local_log.backup.append
static.auto_provision.local_log.backup.append.limit_mode
static.auto_provision.local_log.backup.append.max_file_size
static.auto_provision.local_log.backup.bootlog.upload_wait_time
static.auto_provision.power_on
static.auto_provision.weekly_upgrade_interval
static.auto_provision.inactivity_time_expire
static.auto_provision.custom.sync
static.auto_provision.custom.sync.path
static.auto_provision.custom.protect
static.auto_provision.custom.upload_method
static.auto_provision.attempt_expired_time
static.auto_provision.reboot_force.enable
static.auto_provision.pnp_enable
static.auto_provision.dhcp_option.enable
static.auto_provision.dhcp_option.list_user_options
static.auto_provision.dhcp_option.option60_value
static.auto_provision.repeat.enable
static.auto_provision.repeat.minutes
static.auto_provision.server.type
static.auto_provision.weekly.enable
static.auto_provision.weekly.dayofweek
static.auto_provision.weekly.begin_time
static.auto_provision.weekly.end_time
static.auto_provision.flexible.enable
static.auto_provision.flexible.interval
static.auto_provision.flexible.begin_time
static.auto_provision.flexible.end_time
static.auto_provision.user_agent_mac.enable
static.auto_provision.server.url
static.auto_provision.server.username
static.auto_provision.server.password
static.auto_provision.update_file_mode
static.auto_provision.aes_key_in_file
static.auto_provision.aes_key_16.com
static.auto_provision.aes_key_16.mac
static.auto_provision.encryption.config
static.autoprovision.X.name
static.autoprovision.X.code
static.autoprovision.X.url
static.autoprovision.X.user
static.autoprovision.X.password
static.autoprovision.X.com_aes
static.autoprovision.X.mac_aes
static.auto_provision.url_wildcard.pn
static.auto_provision.attempt_before_failed
static.auto_provision.retry_delay_after_file_transfer_failed
static.auto_provision.dns_resolv_nosys
static.auto_provision.dns_resolv_nretry
static.auto_provision.dns_resolv_timeout
static.managementserver.enable
static.managementserver.username
static.managementserver.password
static.managementserver.url
static.managementserver.connection_request_username
static.managementserver.connection_request_password
static.managementserver.periodic_inform_enable
static.managementserver.periodic_inform_interval
static.watch_dog.enable
static.custom_mac_cfg.url
static.configuration.url
static.features.custom_factory_config.enable
static.custom_factory_configuration.url
static.firmware.url
The new firmware is compatible with old configuration parameters, but not vice versa.

The compatible rules of new parameters and old parameters:

- The settings of old parameters take effect if the corresponding new parameters do not exist in the configuration files;
- The configuration of the phone will be reset to factory defaults first, and then the settings of new parameters take effect as long as the new para
be ignored.

The old parameters may be abandoned in a future release. So we recommend that you use the new parameters for auto provisioning.

New Parameter (X.81.0.15)

bw.xsi.call_log.enable

features.call_park.enable

features.call_park.group_enable

features.call_park.park_ring

features.call_park.park_visual_notify_enable

static.network.attempt_expired_time

static.network.dhcp_host_name

static.network.static_dns_enable

static.network.ipv6_static_dns_enable

static.network.dns.ttl_enable

static.network.dhcp.server_mac1

static.network.dhcp.server_mac2

static.network.mtu_value

static.network.vlan.internet_port_enable

static.network.vlan.internet_port_vid

static.network.vlan.internet_port_priority

static.network.vlan.dhcp_enable

static.network.vlan.dhcp_option

static.network.vlan.vlan_change.enable

static.network.port.http

static.network.port.https

static.network.qos.rtptos

static.network.qos.signaltos

static.network.802_1x.mode
static.network.802_1x.identity

static.network.802_1x.md5_password

static.network.802_1x.root_cert_url

static.network.802_1x.client_cert_url

static.network.vpn_enable

static.openvpn.url

static.network.lldp.enable

static.network.lldp.packet_interval

static.network.port.max_rtpport

static.network.port.min_rtpport

static.network.ip_address_mode

static.network.ipv6_prefix

static.network.ipv6_internet_port.type

static.network.ipv6_internet_port.ip

static.network.ipv6_internet_port.gateway

static.network.ipv6_primary_dns

static.network.ipv6_secondary_dns

static.network.internet_port.type

static.network.internet_port.ip

static.network.internet_port.mask

static.network.internet_port.gateway

static.network.primary_dns

static.network.secondary_dns

static.security.trust_certificates

static.security.user_name.user

static.security.user_name.admin

static.security.user_name.var

static.security.user_password

static.phone_setting.reserve_certs_enable
static.security.ca_cert

static.security.dev_cert

static.security.cn_validation

static.trusted_certificates.url

static.trusted_certificates.delete

static.server_certificates.url

static.server_certificates.delete

static.web_item_level.url

static.security.var_enable

static.security.default_access_level

static.wui.https_enable

static.wui.http_enable

static.lang.wui

static.auto_provision.power_on

static.auto_provision.custom.sync

static.auto_provision.custom.protect

static.auto_provision.custom.upload_method

static.auto_provision.attempt_expired_time

static.auto_provision.reboot_force.enable

static.auto_provision.pnp_enable

static.auto_provision.dhcp_option.enable

static.auto_provision.dhcp_option.list_user_options

static.auto_provision.dhcp_option.option60_value

static.auto_provision.repeat.enable

static.auto_provision.repeat.minutes

static.auto_provision.weekly.enable

static.auto_provision.weekly.dayofweek

static.auto_provision.weekly.begin_time

static.auto_provision.weekly.end_time
static.auto_provision.server.url

static.auto_provision.server.username

static.auto_provision.server.password

static.auto_provision.update_file_mode

static.auto_provision.aes_key_in_file

static.auto_provision.aes_key_16.com

static.auto_provision.aes_key_16.mac

static.autoprovision.X.name

static.autoprovision.X.code

static.autoprovision.X.url

static.autoprovision.X.user

static.autoprovision.X.password

static.autoprovision.X.com_aes

static.autoprovision.X.mac_aes

static.auto_provision.url_wildcard.pn

static.managementserver.enable

static.managementserver.username

static.managementserver.password

static.managementserver.url

static.managementserver.connection_request_username

static.managementserver.connection_request_password

static.managementserver.periodic_inform_enable

static.managementserver.periodic_inform_interval

static.watch_dog.enable

static.custom_mac_cfg.url

static.configuration.url

static.features.custom_factory_config.enable

static.custom_factory_configuration.url

static.firmware.url
 n parameters, but not vice versa.

parameters:
esponding new parameters do not exist in the configuration files;
ory defaults first, and then the settings of new parameters take effect as long as the new parameters with non-null values exist in the configuration files. The corre

ease. So we recommend that you use the new parameters for auto provisioning.

Old Parameter (25.80.0.15)

bw_phonebook.call_log_enable

call_park.enable

call_park.group_enable

call_park.park_ring

call_park.park_visual_notify_enable

network.attempt_expired_time

network.dhcp_host_name

network.static_dns_enable

network.ipv6_static_dns_enable

network.dns.ttl_enable

network.dhcp.server_mac1

network.dhcp.server_mac2

network.mtu_value

network.vlan.internet_port_enable

network.vlan.internet_port_vid

network.vlan.internet_port_priority

network.vlan.dhcp_enable

network.vlan.dhcp_option

network.vlan.vlan_change.enable

network.port.http

network.port.https

network.qos.rtptos

network.qos.signaltos

network.802_1x.mode
network.802_1x.identity

network.802_1x.md5_password

network.802_1x.root_cert_url

network.802_1x.client_cert_url

network.vpn_enable

openvpn.url

network.lldp.enable

network.lldp.packet_interval

network.port.max_rtpport

network.port.min_rtpport

network.ip_address_mode

network.ipv6_prefix

network.ipv6_internet_port.type

network.ipv6_internet_port.ip

network.ipv6_internet_port.gateway

network.ipv6_primary_dns

network.ipv6_secondary_dns

network.internet_port.type

network.internet_port.ip

network.internet_port.mask

network.internet_port.gateway

network.primary_dns

network.secondary_dns

security.trust_certificates

security.user_name.user

security.user_name.admin

security.user_name.var

security.user_password

phone_setting.reserve_certs_enable
security.ca_cert

security.dev_cert

security.cn_validation

trusted_certificates.url

trusted_certificates.delete

server_certificates.url

server_certificates.delete

web_item_level.url

security.var_enable

security.default_access_level

wui.https_enable

wui.http_enable

lang.wui

auto_provision.power_on

auto_provision.custom.sync

auto_provision.custom.protect

auto_provision.custom.upload_method

auto_provision.attempt_expired_time

auto_provision.reboot_force.enable

auto_provision.pnp_enable

auto_provision.dhcp_option.enable

auto_provision.dhcp_option.list_user_options

auto_provision.dhcp_option.option60_value

auto_provision.repeat.enable

auto_provision.repeat.minutes

auto_provision.weekly.enable

auto_provision.weekly.dayofweek

auto_provision.weekly.begin_time

auto_provision.weekly.end_time
auto_provision.server.url

auto_provision.server.username

auto_provision.server.password

auto_provision.update_file_mode

auto_provision.aes_key_in_file

auto_provision.aes_key_16.com

auto_provision.aes_key_16.mac

autoprovision.X.name

autoprovision.X.code

autoprovision.X.url

autoprovision.X.user

autoprovision.X.password

autoprovision.X.com_aes

autoprovision.X.mac_aes

auto_provision.url_wildcard.pn

managementserver.enable

managementserver.username

managementserver.password

managementserver.url

managementserver.connection_request_username

managementserver.connection_request_password

managementserver.periodic_inform_enable

managementserver.periodic_inform_interval

watch_dog.enable

custom_mac_cfg.url

configuration.url

features.custom_factory_config.enable

custom_factory_configuration.url  

firmware.url
ct as long as the new parameters with non-null values exist in the configuration files. The corresponding old parameters will

provisioning.

The latest available version of old

Description
parameter

It enables or disables the BroadSoft call log feature. Latest

It enables or disables the IP DECT phone to display the Park option

Latest
key during a call.
It enables or disables the IP DECT phone to display the GPark option
Latest
key during a call.
It enables or disables the IP DECT phone to play a warning tone
Latest
when a call is parked against its line.
It enables or disables the IP DECT phone to display a parked
Latest
indicator when a call is parked against its line.
It configures the timeout interval (in seconds) to transfer a file for
Latest
HTTP/HTTPS connection.

It configures the DHCP option 12 hostname on the IP DECT phone. Latest

It triggers the static DNS feature to on or off. Latest

It triggers the static IPv6 DNS feature to on or off. Latest

It enables or disables the phone to use TTL (Time To Live) in the A

Latest
record.
It configures the MAC address 1 that the IP DECT phone use to
Latest
authenticate the DHCP server.
It configures the MAC address 2 that the IP DECT phone use to
Latest
authenticate the DHCP server.
It configures the MTU (Maximum Transmission Unit) of network
Latest
interface card.

It enables or disables the VLAN for the Internet port. Latest

It configures the VLAN ID for the Internet port. Latest

It configures the VLAN priority for the Internet port. Latest

It enables or disables the DHCP VLAN discovery feature on the IP

Latest
DECT phone.
It configures the DHCP option from which the IP DECT phone will
Latest
obtain
It theor
enables VLAN settings.
disables the IP DECT phone to obtain IP address with
lower preference of VLAN assignment method or disable the VLAN
Latest
feature when the IP DECT phone cannot obtain IP address with the
current VLANthe
It configures assignment
HTTP portmethod.
for the user to access the web user
Latest
interface of the IP DECT phone using the HTTP protocol.
It configures the HTTPS port for the user to access the web user
Latest
interface of the IP phone using the HTTPS protocol.
It configures the DSCP (Differentiated Services Code Point) for voice
Latest
packets.
It configures the DSCP (Differentiated Services Code Point) for SIP
Latest
packets.

It configures the 802.1x authentication method. Latest

It configures the user name for 802.1x authentication. Latest

It configures the password for 802.1x authentication. Latest

It configures the access URL of the CA certificate. Latest

It configures the access URL of the device certificate.

Latest

It enables or disables the OpenVPN feature on the IP DECT phone. Latest

It configures the access URL of the *.tar file for OpenVPN. Latest

It enables or disables the LLDP (Linker Layer Discovery Protocol)

Latest
feature on the IP phone.
It configures the interval (in seconds) for the IP DECT phone to send
Latest
the LLDP (Linker Layer Discovery Protocol) request.

It configures the maximum local RTP port. Latest

It configures the minimum local RTP port. Latest

It configures the IP address mode. Latest

It configures the IPv6 prefix. Latest

It configures the Internet port type for IPv6. Latest

It configures the IPv6 address. Latest

It configures the IPv6 default gateway. Latest

It configures the primary IPv6 DNS server. Latest

It configures the secondary IPv6 DNS server. Latest

It configures the Internet port type for IPv4. Latest

It configures the IPv4 address. Latest

It configures the IPv4 subnet mask. Latest

It configures the IPv4 default gateway. Latest

It configures the primary IPv4 DNS server. Latest

It configures the secondary IPv4 DNS server. Latest

It enables or disables the IP DECT phone to only trust the server

Latest
certificates in the Trusted Certificates list.
It configures the user name of the user for phone’s web user
Latest
interface access.
It configures the user name of the administrator for phone’s web
Latest
user interface access.
It configures the user name of the var for phone’s web user interface
Latest
access.
It configures the password of the user, var and administrator for
Latest
phone’s web user interface access.
It enables or disables the IP DECT phone to reserve custom
Latest
certificates after it is reset to factory defaults.
It configures the type of certificates in the Trusted Certificates list for
Latest
the IP DECT phone to authenticate for TLS connection.
It configures the type of the device certificates for the IP DECT phone
Latest
to send for TLS authentication.
It enables or disables the IP DECT phone to mandatorily validate the
CommonName or SubjectAltName of the certificate sent by the Latest
server.
It configures the access URL of the custom trusted certificate used to
Latest
authenticate the connecting server.

It deletes all uploaded trusted certificates. Latest

It configures the access URL of the certificate the IP DECT phone

Latest
sends for authentication.

It deletes all uploaded server certificates. Latest

It configures the access URL of the file, which defines 3-level access
Latest
permissions.
It enables or disables the 3-level access permissions (admin, user,
Latest
var).
It configures the default access level to access the phone user
Latest
interface.
It enables or disables the user to access the web user interface of the
Latest
IP DECT phone using the HTTPS protocol.
It enables or disables the user to access the web user interface of the
Latest
IP DECT phone using the HTTP protocol.

It configures the language used on the web user interface. Latest

It triggers the power on feature to on or off. Latest

It enables or disables the IP DECT phone to upload the <MAC>-
local.cfg file to the server each time the file updates, and download Latest
the <MAC>-local.cfg file from the server during auto provisioning.
It enables or disables the IP DECT phone to keep user personalized
Latest
settings after auto provisioning.
It configures the way the IP DECT phone uploads the <MAC>-
Latest
local.cfg file to the provisioning server (for HTTP/HTTPS server only).
It configures the timeout interval (in seconds) to transfer a file via
Latest
auto provisioning.
It enables or disables the IP DECT phone to reboot after auto
provisioning when there is no specific configuration requiring a Latest
reboot.
It triggers the Plug and Play (PnP) feature to on or off. Latest

It triggers the DHCP Option feature to on or off. Latest

It configures the custom DHCP option for requesting provisioning

Latest
server address.
It configures the value (vendor name of the device) of DHCP option
Latest
60.

It triggers the repeatedly feature to on or off. Latest

It configures the interval (in minutes) for the IP DECT phone to

Latest
perform an auto provisioning process repeatedly.

It triggers the weekly feature to on or off. Latest

It configures the days of the week for the IP DECT phone to perform
Latest
an auto provisioning process weekly.
It configures the starting time of the day for the IP DECT phone to
Latest
perform an auto provisioning process weekly.
It configures the ending time of the day for the IP DECT phone to
Latest
perform an auto provisioning process weekly.
It configures the access URL of the provisioning server. Latest

It configures the user name for provisioning server access. Latest

It configures the password for provisioning server access. Latest

It enables or disables the IP DECT phone to only update the settings

Latest
in the downloaded encrypted files.
It enables or disables the IP DECT phone to decrypt configuration
Latest
files using the encrypted AES keys.
It configures the plaintext AES key for encrypting/decrypting the
Latest
Common CFG/Module CFG file.
It configures the plaintext AES key for encrypting/decrypting the
MAC-Oriented files (<MAC>.cfg, <MAC>-local.cfg and <MAC>- Latest
contact.xml).
It configures the code name to trigger auto provisioning. Latest

It configures the activation code to trigger auto provisioning. Latest

It configures the access URL of the provisioning server for the IP
DECT phone to perform auto provisioning which is triggered by Latest
activation code.
It configures the user name for authentication during auto
Latest
provisioning which is triggered by activation code.
It configures the password for authentication during auto
Latest
provisioning which is triggered by activation code.
It configures the plaintext AES key for decrypting the Common CFG
Latest
file.
It configures the plaintext AES key for decrypting the MAC-Oriented
Latest
CFG file.
It configures the characters to replace the wildcard $PN in the
Latest
received URL of the provisioning server.

It enables or disables the TR069 feature. Latest

It configures the user1 name for the IP DECT phone to authenticate

Latest
with the ACS (Auto Configuration Servers).
It configures the password for the IP phone to authenticate with the
Latest
ACS (Auto Configuration Servers).

It configures the access URL of the ACS (Auto Configuration Servers). Latest

It configures the user name for the IP DECT phone to authenticate

Latest
the incoming connection requests.
It configures the password for the IP DECT phone to authenticate the
Latest
incoming connection requests.
It enables or disables the IP DECT phone to periodically report its
Latest
configuration information to the ACS (Auto Configuration Servers).
It configures the interval (in seconds) for the IP DECT phone to report
Latest
its configuration to the ACS (Auto Configuration Servers).

It enables or disables the Watch Dog feature. Latest

It configures the access URL of the custom MAC-Oriented CFG file. Latest

It configures the access URL for the custom configuration files. Latest

It enables or disables the Custom Factory Configuration feature. Latest

It configures the access URL of the custom factory configuration files. Latest

It configures the access URL of the firmware file. Latest