Aruba 370 Series Access Points: High Performance 802.11ac Wave 2 For Outdoor Environments
Aruba 370 Series Access Points: High Performance 802.11ac Wave 2 For Outdoor Environments
Weatherproof and temperature hardened, Aruba The 370 Series also has an integrated Bluetooth Aruba
370 series access points deliver 802.11ac Wave Beacon that simplifies the remote management of a network
of large-scale battery-powered Aruba beacons while also
2 Gigabit Wi-Fi to outdoor and environmentally
providing advanced location and way finding, and proximity-
challenging locations. The 370 high-performance
based push notification capabilities. It enables businesses
and high power series deliver maximum capacity to leverage mobility context to develop applications that can
and range. It delivers 4x4:4SS MU-MIMO capability, deliver an enhanced user experience and increases the value
Aruba’s advanced ClientMatch and an integrated of the wireless network for organizations.
Bluetooth beacon to enable Aruba location services.
UNIQUE BENEFITS
Purpose-built to survive in the harshest outdoor
• Dual Radio 802.11ac access point with Multi-User MIMO
environments, 370 Series APs can withstand exposure to
--Supports up to 1,733 Mbps in the 5 GHz band (with
extreme high and low temperatures, persistent moisture
4SS/VHT80 or 2SS/VHT160 clients) and up to 300 Mbps
and precipitation, and are fully sealed to keep out airborne
in the 2.4 GHz band (with 2SS/HT40 clients).
contaminants. All electrical interfaces include industrial
• Built-in Bluetooth Low-Energy (BLE) radio
strength surge protection.
--Enables location-based services with BLE-enabled mobile
With a maximum concurrent data rate of 1,733 Mbps in devices receiving signals from multiple Aruba Beacons at
the 5 GHz band and 300 Mbps in the 2.4 GHz band (for an the same time.
aggregate peak data rate of 2.0 Gbps), the Aruba 370 Series • Advanced Cellular Coexistence (ACC)
Access Points can quickly add required capacities to your --Minimizes interference from 3G/4G cellular networks,
existing or new wireless networks. distributed antenna systems, and commercial small
cell/femtocell equipment.
The high performance and high density 802.11ac the 370
• Industrial design for harsh indoor and outdoor environments
Series supports 160 MHz channel bandwidth (VHT160),
--Sealed connector interfaces to lock out dust and moisture
multi-user MIMO (MU-MIMO) and 4 spatial streams (4SS).
• Quality of service for unified communication apps
Proactive and deterministic, ClientMatch dynamically --Supports priority handling and policy enforcement for
optimizes Wi-Fi client performance as users roam and RF unified communication apps, including Microsoft Skype
conditions change. If a mobile device moves away from an for Business with encrypted videoconferencing, voice,
AP or RF interference impedes performance, ClientMatch chat, and desktop sharing.
automatically steers it to a better AP. • Best-in-class RF management
With ClientMatch, clients load web pages faster, deliver video --Integrated AirMatch technology manages the 2.4-GHz
streams with improved quality and support high densities and 5-GHz radio bands and actively optimizes the RF
of mobile devices. An 802.11ac network without ClientMatch environment including channel width, channel selection
performs no different than an 802.11n WLAN. and transmit power.
DATA SHEET
ARUBA 370 SERIES ACCESS POINTS
• Supported frequency bands (country-specific • Transmit beam-forming (TxBF) for increased signal
restrictions apply): reliability and range.
--2.400 to 2.4835 GHz • Supported data rates (Mbps):
--5.150 to 5.250 GHz --802.11b: 1, 2, 5.5, 11
--5.250 to 5.350 GHz --802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
--5.470 to 5.725 GHz --802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)
--5.725 to 5.850 GHz --802.11n (5GHz): 6.5 to 600 (MCS0 to MCS31)
• Available channels: Dependent on configured --802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for
regulatory domain. VHT20/40/80, NSS = 1 to 2 for VHT160)
• Dynamic frequency selection (DFS) maximizes the use of • 802.11n high-throughput (HT) support: HT 20/40
available RF spectrum. • 802.11ac very high throughput (VHT) support:
• Supported radio technologies: VHT 20/40/80/160
--802.11b: Direct-sequence spread-spectrum (DSSS) • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
--802.11a/g/n/ac: Orthogonal frequency-division
multiplexing (OFDM) POWER
• Supported modulation types: • Worst-case power consumption from the AP: 23W
--802.11b: BPSK, QPSK, CCK • Power sources sold separately
--802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM • Power over Ethernet (PoE+): 802.3at-compliant
• Transmit power: Configurable in increments of 0.5 dBm • AC Power: 100-240 Volt 50/60Hz AC
• Maximum (conducted) transmit power (limited by local
regulatory requirements): OTHER INTERFACES
--2.4 GHz band: +22 dBm per chain, +25dBm aggregate (2x2) • One 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
--5 GHz band: +22 dBm per chain, +28dBm aggregate (4x4) --Auto-sensing link speed and MDI/MDX
--Note: conducted transmit power levels exclude --802.3az Energy Efficient Ethernet (EEE)
antenna gain. • One 1000BASE-X SFP Port
• Maximum EIRP (limited by local regulatory requirements): • Bluetooth Low Energy (BLE) radio
--2.4 GHz band: --Up to 4 dBm transmit power (class 2) and -91 dBm
»»374: 25 + Antenna Gain receive sensitivity
»»375: 29 dBm EIRP • Visual indicator (multi-color LED): For system and
»»377: 31.4 dBm EIRP radio status
--5 GHz band: • Reset button: Factory reset (during device power up)
»»374: 28 + Antenna Gain + TxBF Gain • Micro USB console interface
»»375: 35.6 dBm EIRP • Kensington security slot
»»377: 36 dBm EIRP
• Advanced Cellular Coexistence (ACC) minimizes MOUNTING
interference from cellular networks. • AP-270-MNT-V1
• Maximum ratio combining (MRC) for improved • AP-270-MNT-V2
receiver performance. • AP-270-MNT-H1
• Cyclic delay/shift diversity (CDD/CSD) for improved • AP-270-MNT-H2
downlink RF performance.
• Short guard interval for 20-MHz, 40-MHz, 80-MHz and
160-MHz channels.
• Space-time block coding (STBC) for increased range and
improved reception.
• Low-density parity check (LDPC) for high-efficiency error
correction and increased throughput.
DATA SHEET
ARUBA 370 SERIES ACCESS POINTS
ENVIRONMENTAL
• Operating:
--Temperature: -40° C to +65° C (-40° F to +149° F)
--Humidity: 5% to 95% non-condensing
• Storage and transportation:
--Temperature: -40° C to +70° C (-40° F to +158° F)
• Operating Altitude: 3,000 m
• Water and Dust
--IP66/67
• Salt Tolerance
--Tested to ASTM B117-07A Salt Spray 200hrs
• Wind Survival: Up to 165 Mph
• Shock and Vibration ETSI 300-19-2-4
REGULATORY
• FCC/ISED
• CE Marked
• RED Directive 2014/53/EU
• EMC Directive 2014/30/EU
• Low Voltage Directive 2014/35/EU
• UL/IEC/EN 60950
• EN 60601-1-1, EN60601-1-2
For more country-specific regulatory information and
approvals, please see your Aruba representative.
DATA SHEET
ARUBA 370 SERIES ACCESS POINTS
RF PERFORMANCE TABLE
1 Mbps 22 -95
2 Mbps 22 -93
5.5 Mbps 22 -90
11 Mbps 22 -88
802.11g 2.4 GHz and 802.11a 5 GHz 2.4 GHz and 802.11a 5 GHz
6 Mbps 22 -93
54 Mbps 19 -75
802.11n HT20 2.4 GHz and 5 GHz
MCS0/8 22 -93
MCS7/15 18 -71
802.11n HT40 2.4 GHz and 5 GHz
MCS0/8 22 -90
MCS7/15 18 -68
802.11ac VHT20 5 GHz
MCS0 22 -93
MCS9 16 -68
802.11ac VHT40 5 GHz
MCS0 22 -90
MCS9 15 -63
802.11ac VHT80 5 GHz
MCS0 22 -87
MCS9 15 -61
802.11ac VHT160 5 GHz
MCS0 22 -86
MCS9 15 -57
Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings.
DATA SHEET
ARUBA 370 SERIES ACCESS POINTS
ORDERING INFORMATION
www.arubanetworks.com DS_AP370Series_061218