Process Control in Cotton Mixing
Process Control in Cotton Mixing
2. How can I decide about cotton mixing for making knitted fabric.
6. What are the four components of yarn quality. How each of these is
affected by fiber quality.
7. What values of yarn quality parameters can be obtained from a cotton mix
of particular fiber attribute.
8. For some pre specified values of yarn characteristics, what are the average
values of fibre attributes that we should in cotton mix.
9. What are the various problems due to cotton mixing vairations, case study
of fabric barre.
CONSULTING
SCOPE OF CONSULTANCY
The Scope of the consultancy could cover one or several of the below
mentioned areas as per mutual agreement.
QUALITY ASSURANCE
Raw Material:
1) Assisting in selection of cotton and optimization of mixings based on
fibre properties and yarn quality required.
2) Continual review of cotton properties, based on requirement for optimum
mixing cost.
3) Assisting in conducting various cotton mixing based trials to arrive at the
most optimum cost of mixing
4) Suggestions to modify the machine sequence/process parameters to
achieve the same.
Quality Systems:
Fabric quality/Packing:
VENDOR DEVELOPMENT