ELECTRIC

SUBMERSIBLE
PUMP

GAS
LIFT

DATA ACQUISITION INSTRUMENTS PROGRESSIVE

CAVITY
FOR EVERY WELL APPLICATION PUMP

SUCKER
ROD
PUMP

RESERVOIR
GRC Solutions
Since 1925, Sercel-GRC has been ESP
applying geophysical methods
to oil exploration. Established by
Amerada® Petroleum Corporation
as Geophysical Research
Corporation, the Amerada® Gauge,
a mechanical tool developed to
measure downhole pressure and
temperature, enabled reservoir
engineers and geophysicists to
determine wellbore and reservoir
capacity and performance. Over
130,000 gauges later and Sercel-
GRC continues to provide the vital
information which ensures health to
your downhole assets.

Piezo Series
 Customizable
The Spy Pro ESP System includes
channels of customizable fit-for-
purpose data: uCommand, High
Speeds and Intake Pressure.
• Under VSD energized conditions
or RiH, uCommand enables
Surface Choke Gauge Surface
Readout
tailored channels of data to be
collected, transmitted, and stored
Spy Pro ESP Systems at the surface.
ESP
• High speeds of data extend the
Motor Controller use of the gauge in reservoir
and well testing applications,
RiH
and improves root cause
TCP
Reservoir analysis while still in the hole.
Well Test • Intake pressure can be read
Burst Disc
internally from the motor oil,
ELECTRIC enabling auditing of the integrity
SUBMERSIBLE Production
PUMP
of the seals, while remaining
Optimization
contact less with harsh well fluids.
ESP Power Cable
Monitor/Protect Financial Benefits
The Spy Pro ESP monitors and Discharge Sub Features • Reduces well intervention, risk,
protects your well from: The new electronic features of the liabilities and costs for all parties
• decreasing the fluid level at GRC Spy Pro ESP System include: involved.
the pump intake (Pi)
• Measure - an ESP motor WYE • Optimizes pump performance,
• increasing motor temperature
Pump point imbalance true downhole run life and oil production.
(Tm)
measurement, which allows • Protect your people, the pump
• increasing mechanical
for the understanding of trends and reservoir.
imbalance (V, xy)
pertaining to the electrical • Eliminates pump shutdown with
• increasing current leakage Discharge
health of your ESP. sensor troubleshooting.
(A); Tubing
Seal
• decreasing pump lifting • Monitor - users can easily
efficiency (Pd) determine if the gauge has Unique Mechanical Concept
• increasing gas locking and failed, cannot communicate to Sercel-GRC’s Spy Pro ESP
sand slugging (Pd, Vz) the surface due to high Systems offer a unique mechanical
Motor
• increasing motor WYE point imbalance, or is grounded. concept. Its precision welded
voltage imbalance (V, wye). • Perform - gauge wiring to the (sealed) design eliminates the need
Motor Base
motor is fuse protected of re-dressing and contamination. In
Crossover
to avoid affecting the motor addition, its shorter, slimline design
ESP Gauge performance. The motor improves deployment in dogleg
winding temperature can be severity and rigless applications.
read with RTD and thermocouple
options.
Spy Pro ESP Systems

• RTD or TC Motor Temp

• Internal Pressure Transducer
• WYE Point Voltage Imbalance
• WYE Point Fuse Protector
• Welded & Sealed
• Shorter & Lighter
• 10K psia Pressure
• uCommand
• 177 °C Temperature
• 3.75” Slim OD

Ahead of the Curve Innovations

Lease Proof
<OPEX
< Penalties
> Higher Run Life
> Increase ROI
 Downhole Surface SAU & Choke ESP-Variable Speed Drive

Spy Pro ESP Systems

Specifications
Specifications
Material Carbon Steel 1026 or 17-4PH Stainless Steel per NACE MR0175
ELECTRIC Material Carbon Steel
Temperature 1026 or 17-4PH Stainless
Rating Steel or
125,150 per177
NACE°C MR0175
SUBMERSIBLE Temperature Rating 125,150 or 177
Max Working Pressure °C 5,000 or 10,000 psi
PUMP Max Working Pressure 5,000 or 10,000
Make-up Length & psi
Weight 17.86 in. & 34 lb
Make-up Length & Weight 17.86Diameter
Outside in. & 34 lb 3.75 in.
Outside Diameter 3.75Base
Motor in. Connection 375 or 456 Series Flange Universal Motor Base
Motor Base Connection 375 or
Sensor 456 Series Flange Universal Motor
Type Base
Piezoresistive
Sensor Type Piezoresistive
Tested Insulation Rating 5,000 VDC
Tested Insulation Rating 5,000 VDCCoupling Requirement Surface Choke
High-voltage
High-voltage Coupling RequirementSurface
Surface
DataChoke
Acquisition SPS-1500P RiH, SPS-1500 Interface or Data Pro Stand Alone
Surface Data Acquisition SPS-1500P RiH, SPS-1500 Interface or Data Pro Stand Alone
Monitoring Options Spy Pro 10 Spy Pro 11 Units Range Resolution Accur
Monitoring Options Spy Pro 10 Spy Pro 11 Units Range Resolution Accuracy Data Range
Primary Parameters for Essential Pump and Surveillance and Protection
Primary Parameters for Essential Pump and Surveillance and Protection
Pump Intake Pressure psia 0-10,000 0.1 +0.1%
Pump Intake Pressure Pump Discharge Pressure psia 0-10,000 0.1 +0.1%FS
psia 40s (2.5s option)
0-10,000 0.1 +0.1%
Pump Discharge Pressure Intake Temperature psia 0-10,000 0.1 +0.1%FS
°C 40s0-177
(2.5s option)
0.1 1
Intake Temperature Motor Winding Temperature °C 0-177 RTD0.1or TC 1°C 40s0-260
(2.5s option)
0.1 1
Motor Winding Temperature Vibration - x Axis RTD or TC °C 0-260 0.1 1g 40s0-16
(2.5s option)
0.01 1%
Vibration - x Axis Vibration - y Axis g 0-16 0.01 1% g 40s0-16
(2.5s option)
0.01 1%
Vibration - y Axis Vibration - z Axis g 0-16 0.01 1%g 40s0-16
(2.5s option)
0.01 1%
Vibration - z Axis g 0-16 0.01 1% 40s (2.5s option)
Predictive Parameters for Application and User Needs
Predictive Parameters for Application and User
Current Needs
Leakage mA 0-50 0.001 0.05
Current Leakage Line Voltage mA 0-50 0.001 0.05%v 40s0-80
(2.5s option)
0.1 1%
Line Voltage Motor WYE Point Voltage Imbalance v 0-80 0.1 1%v 40s0-400
(2.5s option)
0.1 1%
Motor WYE Point Voltage Imbalance v 0-400 0.1 1% 40s (2.5s option)
Data Customization for Application and User Needs
Data Customization for Application and User Needs
uCommand
uCommand
Spy Pro Series Market Differenciating Features
Spy Pro Series Market Differenciating Features
Digital FSK Smart Gauge - Welded & Sealed

Carrier Adapter Metal to Metal Seal 1st Cable Head 2nd Cable Head
Test Port Fishing Neck

Anti-Vibration Gland Assembly Boot and Crimp Sleeve

Permanent Downhole Unique Mechanical Concept Capabilities

Sercel-GRC’s Permanent The GRC Permanent Downhole
Gauge Systems Downhole Gauge (PDHG) Systems Gauge System extends various
Well
present a precision welded (sealed) monitoring capabilities, including Test
Reservoir
design that eliminates the need dual pressure on a single
of re-dressing and contamination. assembly; rigless, thru tubing
In addition, its dual cable head install; reservoir and well testing;
Production
design provides cable strain relief and production optimization. Optimization
for superior sealing, using metal-to-
GAS LIFT metal primary seal, with dual O-ring Fit for Purpose
backup for increased reliability. The Fit for purpose, the PDHG analyses
carrier nose reduces time and risk discharge pressure, which allows
of gauge installation. monitoring pump efficiency when
the gauge is installed above the
Features pump. Annulus and tubing pressure
The new electronic features of the can also both be measured
Smart PDHG include: with a single gauge for gas lift
SUCKER ROD • Calibration coefficients loaded applications. Its vibration X and Y
PUMP in-factory, making it a Plug axis allows for downhole monitoring
& Play to any GRC surface of mechanical imbalance.
acquisition unit - without
the need of laptops, calibration Financial Benefits
coefficients or special tools. • Reduces well intervention, risk,
• Frequency Shift Key (FSK) liabilities and costs for all
enables communication of up parties involved, which, in turn,
to 6 PDHGs (P&T) to a single reduces your total operational
PROGRESSIVE CAVITY use GRC surface acquisition unit. cost.
PUMP • ASIC technology allows for • Optimizes pump performance,
increased reliability and a run life and oil production.
reduced number of components. • Protect your people, the pump
and reservoir.
• Eliminates pump shutdown
due to sensor troubleshooting.
 Pump Motor
Solar Controller
Option

Variable Frequency
Dirve (VSD)
Junction
Box
Permanent Downhole Junction
Box

Gauge Systems Gauge Surface

Readout
Junction
Box

Monitor, Protect Gauge Surface Gauge Surface

Readout Readout
and/or Cruise Control
Tubing Encapsulated
Cable To Surface

• Pump Off
Downhole Gauge
• Over Temperature
Gauge Carrier
• Wear and Tear
• Rod Breakage
Tubing Encapsulated
• Rotor Cable To Surface
PCP
• Elastomer Damage
• Gas Lift Re-injection
• Bubble-Point & Auto Choke Anchor
Downhole Gauge
Optimization
Side Pocket Mandrel
• Valve Operation With Gas Lift Valve Gauge Carrier

Pump Assembly

Inline Gauge for

Multi-Gauge Applications

Tubing Encapsulated
Cable To Surface
Packer

Anchor
Permanent Downhole
Gauge Systems

Specifications
Material 17-4PH Stainless Steel per NACE MR0175
Temperature Rating 150 °C
GAS LIFT
Max Working Pressure 5,000 or 10,000 psi
Make-up Length 27.5 in. w/dual cablehead (single-pressure gauge)
Outside Diameter 1 in. or 1.125 in. (P-5500 only)
Sensor Type Piezoresistive
Surface Data Acquisition FIC-1500 or Data Pro

PQ-Series PDHG Measurement P-4000 P-4500 P-5500 Units Range Resolution Accuracy Data Range
SUCKER ROD
PUMP Primary Parameters for Essential Pump and Surveillance and Protection
Pressure, single-pressure gauge Annulus or Tubing psi 0-10,000 0.1 0.05% 1s
Pressure, dual-pressure gauge Annulus and Tubing psi 0-10,000 0.1 0.05% 1s
Intake Temperature °C 0-150 0.01 0.3 °C 1s
Vibration - x axis g 0-20 0.055 1.0% 1s
Vibration - y axis g 0-20 0.055 1.0% 1s

PROGRESSIVE CAVITY PQ-series PDHG System Measurement Rod Pump PCP Gas Lift
PUMP
Annulus Pressure na na
Tubing Pressure na na
Intake Pressure na
Discharge Pressure na na
Tubing and Annulus Temperature
Vibration (two-axis)
Surface Acquisition
Units

SPS/FIC-1500P SPS/FIC-1500 Data Pro

Run in Hole Interface Card Stand Alone Panel
• ESP or PDHG • ESP or PDHG • ESP or PDHG
• Plug & Play • Plug & Play • Plug & Play
• Small Footprint • Small Footprint • Compact & Light
• Tools Free • Tools free • Tools free
• Laptop Free • Laptop free • Laptop free
• Programming Free • Programming free • Programming free
• WIFI Enabled (SPS only) • Modbus Map On-Screen • Multiple I/Os

Power ......................... 12-24VDC, 1.5A Power ......................... 12-26 VDC, 100mA fused Power Requirements ........ 100 to 240VAC
Operating Temp ......... -20 ˚C to +70 ˚C Operating Temp ......... -17 ˚C to +65 ˚C (12 – 24VDC)
Enclosure .................... Waterproof Case Enclosure .................... Din rail mount, indoor use only UL Temperature ............... -20 ˚C to +60 ˚C
Display ........................ 2x16 character backlit LCD 3.5”W, 3.7”L, 2.3”H Display .............................. 7” Touch Screen LCD
USB connector Communication ........... Modbus, 1200 to 19200 baud (Res. 800 x 480 px)
Easy access to fuse Modbus Port ................ RS-485 isolated, usb Enclosure .......................... NEMA 4x Rated
Display ........................ 2x16 character backlit LCD Analog Inputs .................... 3 x 0-15VDC or 0-64mA
Wi-Fi access up to 100ft (SPS Only) Electrical Access ......... 4 post power/gauge terminal Analog Outputs ................. 2 x 4-20mA (15-bit
block resolution)
4 post modbus terminal block Alarm ................................. 2 x Latching SPDT dry
contacts
USB connector USB Ports ......................... 1
Easy access to fuse Relay Outputs ................... 5A @ 250VDC / 30VDC
Ethernet Ports ................... 2 (Modbus, TCP/IP or
SFTP)
Modbus Ports .....................1 x RS-485 (non-isolated)
2 x RS-232 (non-isolated)
1 x RS-485 or RS-232
(isolated)
Storage Capacity .............. 5GB Internal
Memory Gauges Sercel-GRC’s Memory Gauge has
an external communication port
that positively leverages its ease of
use, and it boasts a smart battery
pack. Paired to GRC MetroWin or
MetroTrack software, it extends the
data management capabilities of
a typical memory gauge, leading Features
GAS LIFT
to technology breakthroughs: Piezoresistive Quartz Crystal
PRM5/iGauge5 CGM5/iQuartz5
direct access to gauge statistics;
Gradient Survey
customizable reports; instant
TCP
access to gauge status; and easy
Sand Control
data importing from the MetroWin Build Up (short)
software. Build Up (long)
High Pressure
Capabilities/Fit for Purpose High Temperature
RESERVOIR Monitoring capabilities of the Pulse/Interference
Memory Gauge include: DSt
• 225 °C
• 30,000 psi
• Reservoir and well testing
• Production Optimization Well
Reservoir
Test
• Data Integrity is Guaranteed
and Fit for Purpose

Financial Benefits Production

Optimization
• Reduces risk, liabilities and
costs for all parties involved,
which, in turn, reduces your total
operational cost.
• Increases run life.
• Protects your people and
the reservoir.
Memory Gauges Gas Lift Piezo Series Quartz Series
Side Pocket Mandrel
The Sercel-GRC’s Memory Gauge • 150 °C • 150, 177, 200, 225 °C • 150, 177, 200, 225 °C
is offered as a Gas Lift Side • 5K, 15K psia • 1.5K, 5K, 10K, 15K psia • 5K, 10K, 15K, 20K psia
Pocket Mandrel; Piezo Series;
• 17-4 PH • 17-4 PH, 718 Inconel • 1718 Inconel
and Quartz Series - all MetroWin
Software, made to last. • OD 1, 1.5 ̋ • OD 3/4, 1-1/4 ̋ • OD 1-1/4, 1-1/4 ̋
• Tubing Annulus • 2.8MM, 4.2MM Data Points • 4.2MM Data Points
• Smart Battery • Smart Battery

MetroWin Software
Sercel Inc.
17200 Park Row
Houston, TX 77084-5935 USA
T: +1 281 492 6688
www.sercel-grc.com

Sales, Stock and Customer Support Sites

• United States of America

o Houston, TX (Mfg, Sales, Stock & Support)
o Tulsa, OK (Sales & Support)
o Midland, TX (Sales, Stock & Support)

• Colombia
o Bogota, DC (Sales & Support)

• United Arab Emirates

o Dubai (Sales & Support)

• Egypt
o Cairo (Sales & Support)

• China
o Beijing (Sales)

www.sercel-grc.com