Eden Net Module Specific Data For Huawei
Eden Net Module Specific Data For Huawei
The information in this document applies solely to the hardware/software product (“Product”) specified herein, and only as specified herein.
This document is intended for use by Nokia' customers (“You”) only, and it may not be used except for the purposes defined in the agreement
between You and Nokia (“Agreement”) under which this document is distributed. No part of this document may be used, copied, reproduced,
modified or transmitted in any form or means without the prior written permission of Nokia. If you have not entered into an Agreement
applicable to the Product, or if that Agreement has expired or has been terminated, You may not use this document in any manner and You
are obliged to return it to Nokia and destroy or delete any copies thereof.
The document has been prepared to be used by professional and properly trained personnel, and You assume full responsibility when using
it. Nokia welcome Your comments as part of the process of continuous development and improvement of the documentation.
This document and its contents are provided as a convenience to You. Any information or statements concerning the suitability, capacity,
fitness for purpose or performance of the Product are given solely on an “as is” and “as available” basis in this document, and Nokia reserves
the right to change any such information and statements without notice. Nokia has made all reasonable efforts to ensure that the content of
this document is adequate and free of material errors and omissions, and Nokia will correct errors that You identify in this document. But,
Nokia' total liability for any errors in the document is strictly limited to the correction of such error(s). Nokia does not warrant that the use of
the software in the Product will be uninterrupted or error-free.
This document is Nokia’ proprietary and confidential information, which may not be distributed or disclosed to any third parties without the
prior written consent of Nokia.
Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their
respective owners, and they are mentioned for identification purposes only.
Nokia is continually striving to reduce the adverse environmental effects of its products and services. We would like to encourage you
as our customers and users to join us in working towards a cleaner, safer environment. Please recycle product packaging and follow the
recommendations for power use and proper disposal of our products and their components.
If you should have questions regarding our Environmental Policy or any of the environmental services we offer, please contact us at Nokia for
any additional information.
EdenNet Module Specific Data for DN09252639 1-3 Table of Contents
Huawei
Contents
1 Summary of changes...................................................................................................................................... 7
6.1.4 Commands...................................................................................................................................... 42
6.2 LTE Coverage and Capacity Optimization..............................................................................................43
6.2.1 PM counters....................................................................................................................................43
6.2.2 CM objects or parameters.............................................................................................................. 47
6.2.3 RAN KPIs........................................................................................................................................47
6.3 Coordinated Coverage and Capacity Optimization.................................................................................48
6.3.1 PM counters....................................................................................................................................49
6.3.2 CM objects or parameters.............................................................................................................. 52
6.3.3 RAN KPIs........................................................................................................................................52
13 LMS Enforcement........................................................................................................................................ 93
13.1 CM objects or parameters.................................................................................................................... 93
1 Summary of changes
• RAN KPIs section is updated for LTE MLB by removing the following
KPI:
– Intra_F_HO_FR
• RAN KPIs section is updated for LTE MLB 2.0 by removing the follow-
ing KPIs:
– Intra_F_HO_FR
– INTRA_F_HO_SUCC_NB
Updated sections:
EdenNet 21 No change.
EdenNet 20 No change.
• 3G MLB 2.0
– PM counters
– CM objects or parameters
– Huawei-2G configuration recommendation
– RAN KPIs
• LTE Energy Saving Management
– PM counters
– CM objects or parameters
– Huawei-4G configuration recommendation
Updated sections:
EdenNet 19 FP 1905 • The CM objects or parameters section is updated for the ANR 3G
module.
EdenNet 19 FP 1904 • The CM objects or parameters section is updated with a note for the
LTE PRACH Optimization module.
Updated sections:
Updated sections:
• The PM counters and RAN KPIs sections are updated for the LTE
PRACH Optimization module.
• The RAN KPIs section is updated for the ANR 4G IRAT module.
• The RAN KPIs section is updated for the ANR_Blacklisting_cleanup_
LTE module.
• The PM counters and the RAN KPIs sections are updated for the 3G
MLB module.
• The PM counters and RAN KPIs sections are updated for WCDMA
CCO module.
Eden-NET 17 SP1 FP1 The CM objects or parameters section is updated for the PRACH Opti-
mization module.
Eden-NET 17 FP1 LTE PCI Reuse Optimization > RAN KPIs, the following KPIs are removed:
Huawei vendor supports command line execution of MML type of commands for GSM and WCDMA
technologies.
3.1.1 PM counters
The PM counters considered as inputs for the GSM ANR module are listed in Table 2: GSM to GSM
Optimization - Basic Topology Based Functionality , Table 3: GSM to UMTS Optimization Functionality
.
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Cell Performance
(1290795173)
Para-
Parameter
Managed meter Additional infor-
name as Default Range Step Action
Object (MO) name as mation
in OSS
in module
Para-
Parameter
Managed meter Additional infor-
name as Default Range Step Action
Object (MO) name as mation
in OSS
in module
3.1.3 Commands
The list of MML type of commands used by GSM ANR are:
• LST NE
• REG NE
• LST/MOD GCELL
• LST/MOD/ADD GEXT2GCELL
• LST/MOD/ADD GEXT3GCELL
• LST/MOD/ADD GEXTLTECELL
• LST/MOD/ADD G2GNCELL
• LST/MOD/ADD G3GNCELL
• LST/MOD/ADD GLTENCELL
where:
• LST command is used to list the managed object (MO) or Network Element (NE)
• MOD command is used to modify the MO
• ADD command is used to add the MO
• REG command is used to register with the network element
3.2.1 ANR 3G
3.2.1.1 PM counters
The PM counters considered as inputs for ANR 3G module are listed in Table 5: PM counters for ANR
3G.
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Parameter
Managed Parameter name Additional informa-
name as in Default Range Step Action
Object (MO) as in OSS tion
module
Parameter
Managed Parameter name Additional informa-
name as in Default Range Step Action
Object (MO) as in OSS tion
module
Note: For external cell managed objects (UEXT3GCEL, UEXT2GCEL), all parameters are
normally set through the ANR 3G module and are taken from the source cell definition.
KPI Name
HO attempts
HO success
KPI Name
Voice Drops
Table 8: RAN KPIs used by ANR 3G module for verification and rollback
3.2.2 Commands
The list of MML type of commands used by the WCDMA ANR module is:
• LST NE
• REG NE
• LST/MOD URNCBASIC
• LST/MOD UCELL
• LST/MOD/ADD UEXT3GCELL
• LST/MOD/ADD UEXT2GCELL
• LST/MOD/ADD U2GNCELL
• LST/MOD/ADD UINTRAFREQNCELL
• LST/MOD/ADD UINTERFREQNCELL
• LST UCNOPERATOR
• LST UCNOPERGROUP
• LST/MOD USMLCCELL
where:
• LST command is used to list the managed object (MO) or Network Element (NE)
• MOD command is used to modify the MO
• ADD command is used to adds the MO
• REG command is used to register with the network element
3.3.1 ANR_Blacklisting_cleanup_LTE
3.3.1.1 PM counters
The PM counters considered as inputs for LTE ANR Blacklisting module are listed in Table 9: PM
counters for LTE ANR Blacklisting.
Managed object
Counter ID Counter name Interval (minutes)
(MO)
The CM parameters modified by LTE ANR Blacklisting module are listed in Table 10: CM parameters
modified by LTE ANR Blacklisting.
Parameter Parameter
Managed
name as in name as in Default Range Step Action
Object (MO)
module OSS
Parameter Parameter
Managed
name as in name as in Default Range Step Action
Object (MO)
module OSS
KPI Name
LTE_INTRA_HO_ATT
LTE_INTER_HO_ATT
LTE_INTRA_HO_SUCCESS
LTE_INTER_HO_SUCCESS
LTE_IRAT_HO_ATT_3G
LTE_IRAT_HO_SUCCESS_3G
LTE_IRAT_HO_ATT_SRVCC_3G
LTE_IRAT_HO_SUCCESS_SRVCC_3G
LTE_IRAT_HO_ATT_SRVCC_2G
LTE_IRAT_HO_SUCCESS_SRVCC_2G
KPI Name
LTE_eRAB_Voice_Drop_Rate_RAN_View
Table 12: RAN KPIs used by ANR_Blacklisting_cleanup_LTE module for verification and rollback
Customers can configure the relevant cell level KPIs in the Operator policy.
3.3.2.1 PM counters
The PM counters considered as inputs for the ANR 4G IRAT module are listed in Table 13: ANR 4G
IRAT.
Para-
Parameter
Managed Object meter Additional infor-
name as in Default Range Step Action
(MO) name as mation
module
in OSS
Para-
Parameter
Managed Object meter Additional infor-
name as in Default Range Step Action
(MO) name as mation
module
in OSS
UTRANNCELL mcc mcc N/A 2 to 3 N/A Create, module. All other at-
charac- update, tribute values can
ters delete be set through the
LMS templates.
UTRANNCELL localcellid localcellid N/A 0 to 255 N/A Create,
update,
delete
4.1 APO
The APO and the APO 2.0 module can access or set all cell level parameters and all PM
counters depending upon the operator configuration.
• PM counters
• CM objects or parameters
• RAN KPIs
5.1.1 PM counters
The Huawei PM counters considered as inputs for Cell Outage Compensation module are listed in the
Table 16: Huawei PM counters for Cell Outage Compensation.
Parameter Parameter
Managed Ob-
name as in name as in Default Range Step Action
ject (MO)
module OSS
The following EdenNet KPIs are used as input by the Cell Outage Compensation algorithm:
Auto Manual Downtime Indicates the cell downtime in percentage both auto
and manual.
Voice Drops due to loss of UL Sync Number of CS RABs abnormally released due to RF for
cell (Uplink Synchronization Fail).
UL RTWP Level The mean power of the totally received bandwidth for a
cell.
RRC Connection Rejects for Congestion The sum of Radio Resource Controller (RRC) connec-
Reasons tion rejects for cell due to congestion in uplink (UL) and
downlink (DL).
• PM counters
• CM objects or parameters
• RAN KPIs
5.2.1 PM counters
The Huawei PM counters considered as inputs for Cell Outage Compensation module are listed in the
Table 19: Huawei PM counters for Cell Outage Compensation.
Parameter
Managed Ob- Parameter name
name as in Default Range Step Action
ject (MO) as in OSS
module
The following EdenNet KPIs are used as input by the Cell Outage Compensation algorithm:
LTE Voice RRC Accessibility Failure LTE accessibility – network RRC success rate.
Rate(AFR)
LTE Auto Downtime KPI that indicates the cell down period.
LTE Auto Manual Downtime KPI that indicates the cell down period including manual
down period.
• PM counters
• CM objects or parameters
• RAN KPIs
6.1.1 PM counters
The Huawei PM counters considered as inputs for WCDMA CCO module are listed in the Table 22:
Huawei PM counters for WCDMA CCO.
Parameter Parameter
Managed Ob-
name as in name as in Default Range Step Action
ject (MO)
module OSS
KPI Name
VS_TP_UE_0
KPI Name
VS_TP_UE_1
VS_TP_UE_10_15
VS_TP_UE_16_25
VS_TP_UE_2
VS_TP_UE_26_35
VS_TP_UE_3
VS_TP_UE_36_55
VS_TP_UE_4
VS_TP_UE_5
VS_TP_UE_6_9
VS_TP_UE_More55
The following are the EdenNet KPIs considered for Verification and Rollback:
KPI Name
LTE_Accessibility
LTE_Retainability
LTE_Retainability_Voice
LTE_PDCP_Vol_DL_bits
LTE_PDCP_Vol_UL_bits
LTE_IRAT_Count
LTE_UL_PRB_Util_P50
LTE_DL_PRB_Util_P50
LTE_CQI_P50
KPI Name
WCDMA - HSDPA_Drop_Rate
GSM - SDCCH_Failure_Ratio
GSM - TCH_Failure_Ratio
GSM - TCH_Traffic_Erl
6.1.4 Commands
The list of MML type of commands used by the WCDMA CCO are:
• LST NE
• REG NE
• LST UPCPICH
• LST/MOD UCELL
• LST/MOD RETSUBUNIT
where:
• LST command is used to list the managed object (MO) or Network Element (NE)
• MOD command is used to modify the MO
• ADD command is used to adds the MO
• REG command is used to register with the network element
• PM counters
• CM objects or parameters
• RAN KPIs
6.2.1 PM counters
Huawei PM counters considered as inputs for LTE CCO module are listed in the Table 26: Huawei PM
counters for LTE CCO.
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Parameter
Managed Ob- Parameter name
name as in Default Range Step Action
ject (MO) as in OSS
module
• #unique_92
• #unique_93
• #unique_94
6.3.1 PM counters
The PM counters considered as inputs for C-CCO module are listed in the Table 30: PM counters for
C-CCO
1526728959 L_RA_TA_UE_Index3
1526728960 L_RA_TA_UE_Index4
1526728961 L_RA_TA_UE_Index5
1526728962 L_RA_TA_UE_Index6
1526728963 L_RA_TA_UE_Index7
1526728964 L_RA_TA_UE_Index8
1526728965 L_RA_TA_UE_Index9
1526728966 L_RA_TA_UE_Index10
1526728967 L_RA_TA_UE_Index11
67199622 VS.RB.AMR.DL.7.4
67199623 VS.RB.AMR.DL.5.9
67199624 VS.RB.AMR.DL.5.15
67199625 VS.RB.AMR.DL.4.75
67199626 VS.RB.AMR.UL.10.2
67199627 VS.RB.AMR.UL.12.2
67199628 VS.RB.AMR.UL.7.95
67199629 VS.RB.AMR.UL.7.4
67199630 VS.RB.AMR.UL.5.9
67199631 VS.RB.AMR.UL.5.15
67199632 VS.RB.AMR.UL.4.75
67203806 VS.RB.AMRWB.DL.18.25
67203807 VS.RB.AMRWB.DL.15.85
67203808 VS.RB.AMRWB.DL.14.25
67203809 VS.RB.AMRWB.DL.12.65
67203810 VS.RB.AMRWB.DL.8.85
67203811 VS.RB.AMRWB.DL.6.60
67203812 VS.RB.AMRWB.UL.23.85
67203813 VS.RB.AMRWB.UL.23.05
67203814 VS.RB.AMRWB.UL.19.85
67203815 VS.RB.AMRWB.UL.18.25
67203816 VS.RB.AMRWB.UL.15.85
67203817 VS.RB.AMRWB.UL.14.25
67203818 VS.RB.AMRWB.UL.12.65
67203819 VS.RB.AMRWB.UL.8.85
67203820 VS.RB.AMRWB.UL.6.60
73423492 VS.TP.UE.3
73423494 VS.TP.UE.4
73423496 VS.TP.UE.5
73423498 VS.TP.UE.6.9
73423502 VS.TP.UE.16.25
73423504 VS.TP.UE.26.35
73423506 VS.TP.UE.36.55
73423508 VS.TP.UE.More55
73423510 VS.TP.UE.10.15
Parameter Parameter
Managed Ob-
name as in name as in Default Range Step Action
ject (MO)
module OSS
• PM counters
• CM objects or parameters
• RAN KPIs
7.1.1 PM counters
Table 33: Huawei PM counters for GSM ESM describes the Huawei PM counters considered as inputs
for GSM ESM.
Table 34: Huawei CM parameters for GSM ESM describes the Huawei CM parameters used or modi-
fied by GSM ESM.
Table 35: 2G ES activation period configuration parameters lists the ES activation period configuration
parameters.
GCELLDYNTURNOFF TURNOFFCELLSTRTIME
GCELLDYNTURNOFF TURNOFFCELLSTPTIME
Table 36: 2G ES thresholds configuration parameters lists the ES thresholds configuration parameters
along with their recommended values for conservative and aggressive energy saving.
GCELLDYNTURNOFF PROTECTTIME 5 1
GCELLDYNTURNOFF SAMECVGCELLLOAD- 5 5
STATTM
GCELLDYNTURNOFF SAMECVGCELLLOAD- 50 50
THRD
GCELLDYNTURNOFF TURNOFFCELLCHAN- 6 6
NUM
GCELLDYNTURNOFF TURNONCELLLOAD- 80 80
THRD
Note: ES thresholds must be configured only for the capacity layer in 2G Huawei.
The recommended values for capacity layer, coverage and special cells layer is described in the fol-
lowing tables:
Recommended value
MO name Parameter description for coverage and spe- ES Disable Value
cial cell
Table 37: Recommended value for coverage layer and special cells layer
Recommended value
MO name Parameter description for coverage and spe- ES Disable Value
cial cells
Table 39: GSM ESM RAN KPI names describes the EdenNet KPIs used as input by GSM Energy Sav-
ing Module (ESM).
KPI Description
TCH_Busy_Avg Number of half-rate (HR TCH) and full rate traffic channels
(FR TCH) used during a period of time.
• PM counters
• CM objects or parameters
• RAN KPIs
7.2.1 PM counters
Table 40: Huawei PM counters for WCDMA ESM describes the Huawei PM counters considered as in-
puts for WCDMA ESM.
Managed Interval
object (MO) Counter ID Counter name Measurements
(minutes)
Managed Interval
object (MO) Counter ID Counter name Measurements
(minutes)
VS.HSDPA.DC.
Measurement of Measurements related
73410508 PRIM.UE.Mean. 15
Cell Performance to HSDPA
Cell
Measurements relat-
Measurement of
73410510 VS.CellDCHUEs ed to Radio Resource 15
Cell Performance
Control
UCELLDYN
CELLID CELLID None 0~65535 1 Read
SHUTDOWN
• IMMEDIATE-
UCELLDYN CELLSTARTUP- CELLSTARTUP- IMMEDIATE- Read/
LY N/A
SHUTDOWN TYPE TYPE LY write
• GRADUALLY
• INTRA FRE-
QUENCY
UCELLDYN COCOVNCELL- COCOVNCELL- Read/
None • INTER FRE- N/A
SHUTDOWN TYPE TYPE write
QUENCY
• INTERBAND
CONDITION-
UCELLDYN DYNSHUTDOWN DYNSHUTDOWN • FORCE Read/
AL SHUT- N/A
SHUTDOWN TYPE TYPE SHUTDOWN write
DOWN
• OFF
UCELLDYN DYNSHUTDOWN DYNSHUTDOWN • ON_1 Read/
None N/A
SHUTDOWN SWITCH SWITCH • ON_2 write
• ON_3
UCELLDYN Read/
ENDTIME1 ENDTIME1 None 00:00~23:59 mins N/A
SHUTDOWN write
UCELLDYN Read/
ENDTIME2 ENDTIME2 None 00:00~23:59 mins N/A
SHUTDOWN write
UCELLDYN Read/
ENDTIME3 ENDTIME3 None 00:00~23:59 mins N/A
SHUTDOWN write
• SPI1:0 • SPI1
• SPI2:0 • SPI2
• SPI3:0 • SPI3
• SPI4:0 • SPI4
• SPI5:0 • SPI5
• SPI6:0 • SPI6
• SPI7:0 • SPI7
UCELLDYN Read/
HIGHPRISPI HIGHPRISPI • SPI8:0 • SPI8 N/A
SHUTDOWN write
• SPI9:0 • SPI9
• SPI10:0 • SPI10
• SPI11:0 • SPI11
• SPI12:0 • SPI12
• SPI13:0 • SPI13
• SPI14:0 • SPI14
• SPI15:0 • SPI15
UCELLDYN
LOGICRNCID LOGICRNCID None 0~4095 1 Read
SHUTDOWN
REFUEBAN- REFUEBAN-
UCELLDYN • OFF Read/
DACCESSCA- DACCESSCA- OFF N/A
SHUTDOWN • ON write
PABSWITCH PABSWITCH
UCELLDYN Read/
STARTTIME1 STARTTIME1 None 00:00~23:59 min N/A
SHUTDOWN write
UCELLDYN Read/
STARTTIME2 STARTTIME2 None 00:00~23:59 min N/A
SHUTDOWN write
UCELLDYN Read/
STARTTIME3 STARTTIME3 None 00:00~23:59 min N/A
SHUTDOWN write
• BLINDHO
UCELLDYN USERMIGRATION USERMIGRATION Read/
BLINDHO • PCPICHPOW N/A
SHUTDOWN TYPE TYPE write
ERADJUST
URNCCEL-
DYNCELLOPEN- DYNCELLOPEN- Read/
LSHUT- 20 1~3600 1
JUDGETIMERLEN JUDGETIMERLEN Write
DOWNPARA
URNCCEL-
DYNCELLSHUT- DYNCELLSHUT- • OFF Read/
LSHUT- OFF N/A
DOWNSWITCH DOWNSWITCH • ON Write
DOWNPARA
Note: Parameters with bitmask/bit field type data type should be represented as a whole
number.
The ES Activation period configuration parameters table lists the ES activation period configuration pa-
rameters.
UCELLDYNSHUTDOWN STARTTIME1
UCELLDYNSHUTDOWN ENDTIME1
UCELLDYNSHUTDOWN STARTTIME2
UCELLDYNSHUTDOWN ENDTIME2
UCELLDYNSHUTDOWN STARTTIME3
UCELLDYNSHUTDOWN ENDTIME3
The ES thresholds configuration table lists the ES thresholds configuration parameters along with their
recommended values for conservative and aggressive energy saving.
Recommended Recommended
values for con- values for ag-
MO name Parameter name
servative energy gressive energy
saving profile saving profile
UCELLDYNSHUTDOWN HSDPAUSERNUMTHD 7 15
UCELLDYNSHUTDOWN HSUPAUSERNUMTHD 8 15
UCELLDYNSHUTDOWN TOTALUSERNUMTHD 8 25
UCELLDYNSHUTDOWN MCHSDPAUSERNUMTHD 2 5
UCELLDYNSHUTDOWN NCELLLDRREMAINTHD 20 30
Table 44: 3G ES thresholds configuration for controller layer lists the MO and parameter names with
their respective recommended values.
URNCCELLSHUTDOWNPARA DYNCELLOPENJUD- 20
GETIMERLEN
The tables below explain the default configuration recommendation for capacity layer for different Cell
Dynamic ShutDown types (mentioned in the third column in every following table) such as,
• ForceShutDown
• ConditionalShutDown
• QosShutDown
• RRU Intelligent Dormancy
Note: Parameters with bitmask/bit field type data type should be represented as a whole
number.
The recommended values for capacity layer, coverage and special cells layer is described in the fol-
lowing tables:
Table 49: Recommended values for coverage layer and special cells layer
URNCCELLSHUTDOWNPARA DYNCELLSHUT- ON
DOWNSWITCH
Note:
The RAN KPI names table describes the EdenNet KPIs used as input by the Energy Saving Module
(ESM).
HSDPA Erlangs Average number of High Speed Downlink Packet Access (HSDPA)
user equipment connections in a cell.
Average HSUPA-Erlangs Average number of High Speed Uplink Packet Access (HSUPA)
user equipment connections in a cell.
Max HSUPA-Erlangs Maximum number of High Speed Uplink Packet Access (HSUPA)
user equipment connections in a cell
Max HSDPA-Erlangs Maximum number of High Speed Downlink Packet Access (HSD-
PA) user equipment connections in a cell
• PM counters
• CM objects or parameters
• RAN KPIs
7.3.1 PM counters
Table 52: Huawei PM counters for LTE ESM describes the Huawei PM counters considered as inputs
for LTE ESM.
Table 53: Huawei CM objects for LTE ESM describes the Huawei CM parameters used or modified by
LTE ESM.
UE_NUMBER
Table 54: ES activation period configuration lists the ES activation period configuration parameters.
CELLSHUTDOWN STARTTIME
CELLSHUTDOWN STOPTIME
Table 55: ES thresholds configuration parameters for capacity layer lists the ES thresholds configura-
tion parameters along with their recommended values for conservative and aggressive energy saving.
CELLSHUTDOWN DLPRBTHD 10 20
CELLSHUTDOWN DLPRBOFFSET 20 30
CELLSHUTDOWN ULPRBTHD 10 20
CELLSHUTDOWN ULPRBOFFSET 20 30
Table 56: ES thresholds configuration parameters for coverage layer lists the ES thresholds configura-
tion parameters along with their recommended values for energy saving.
CELLSHUTDOWN DLPRBTHD 0
CELLSHUTDOWN ULPRBTHD 0
For ES mode configuration, the recommended values for special cells layer, and capacity and cover-
age layer is described in the following tables:
Table 59: ES activation period configuration lists the ES activation period configuration parameters.
CELLRFSHUTDOWN STARTTIME
CELLRFSHUTDOWN STOPTIME
Table 60: ES thresholds configuration parameters lists the ES thresholds configuration parameters
along with their recommended values for conservative and aggressive energy saving.
CELLRFSHUTDOWN RSPWRADJOFFSET 3 3
CELLRFSHUTDOWN UENUMTHD 0 0
CELLRFSHUTDOWN DLPRBTHD 10 20
CELLRFSHUTDOWN DLPRBOFFSET 10 20
CELLRFSHUTDOWN ULPRBTHD 10 20
CELLRFSHUTDOWN ULPRBOFFSET 10 20
Table 61: ES mode configuration lists the ES mode configuration parameters with their recommended
and ES Disable values.
Table 62: LTE ESM RAN KPI names describes the EdenNet KPIs used as input by LTE Energy Saving
Module (ESM).
KPI Description
• PM counters
• CM objects or parameters
• RAN KPIs
8.1.1 PM counters
The Huawei PM counters considered as inputs for LTE Crossed Antenna Detection module are listed
in the Table 63: Huawei PM counters for LTE Crossed Antenna Detection.
Inter-
Managed object
Counter ID Counter name Measurements val (min-
(MO)
utes)
Note: KPIs aggregated at hourly (60 minute) interval are used when module's statistics
period is configured to day, and at daily (1440 minute) interval when statistics period is
configured to week.
Parameter Parameter
Managed Ob-
name as in name as in Default Range Step Action
ject (MO)
module OSS
Parameter Parameter
Managed Ob-
name as in name as in Default Range Step Action
ject (MO)
module OSS
The following EdenNet KPIs are used as input by the LTE Crossed Antenna Detection algorithm:
Table 66: RAN KPIs used by LTE Crossed Antenna Detection module
• PM counters
• CM objects or parameters
• RAN KPIs
8.2.1 PM counters
The Huawei PM counters considered as inputs for WCDMA Crossed Antenna Detection module are
listed in the Table 67: Huawei PM counters for WCDMA Crossed Antenna Detection.
Inter-
Managed object (MO) Counter ID Counter name Measurements val (min-
utes)
Note: KPIs aggregated at hourly (60 minute) interval are used when module's statistics
period is configured to day, and at daily (1440 minute) interval when statistics period is
configured to week.
Parameter Parameter
Managed Ob-
name as in name as in Default Range Step Action
ject (MO)
module OSS
The following EdenNet KPIs are used as input by the WCDMA Crossed Antenna Detection algorithm:
Table 69: RAN KPIs used by WCDMA Crossed Antenna Detection module
• PM counters
• CM objects or parameters
• RAN KPIs
8.3.1 PM counters
The Huawei PM counters considered as inputs for GSM Crossed Antenna Detection module are listed
in the Table 70: Huawei PM counters for GSM Crossed Antenna Detection.
Inter-
Managed ob-
Counter ID Counter name Measurements val (min-
ject (MO)
utes)
Managed
Parameter name as Parameter name as
Object Default Range Step Action
in module in OSS
(MO)
The following EdenNet KPIs are used as input by the GSM Crossed Antenna Detection algorithm:
Table 72: RAN KPIs used by GSM Crossed Antenna Detection module
• PM counters
• CM objects or parameters
• RAN KPIs
9.1 PM counters
The Huawei PM counters considered as inputs for GFO module are listed in the Table 73: Huawei PM
counters for GFO.
Managed Interval
object Counter ID Counter name Measurements (min-
(MO) utes)
Parameter
Parameter name
Managed Object (MO) name as in Default Range Step Action
as in OSS
module
DCS1800 -
1, GSM900_
DCS1800 - 2,
GSM850 - 3,
PCS1900 - 4,
GSM850_1800
- 5, GSM850_
1900 - 6,
TGSM810 - 7
NO_FH - 0,
BaseBand_FH
- 1,
RF_FH - 2,
Hybrid_FH - 4
Parameter
Parameter name
Managed Object (MO) name as in Default Range Step Action
as in OSS
module
ping with
GCELL
MAGRP
NO - 0,
YES - 1
BaseBand_FH
- 1,
RF_FH - 2
Parameter
Parameter name
Managed Object (MO) name as in Default Range Step Action
as in OSS
module
• PM counters
• CM objects or parameters
• RAN KPIs
10.1.1 PM counters
The Huawei PM counters considered as inputs for LTE PCI Reuse Optimization module are listed in
the Table 76: Huawei PM counters for LTE PCI Reuse Optimization.
Managed
Interval
object Counter ID Counter name Measurements
(minutes)
(MO)
FORBID_
RMV_
ENUM
FORBID_
RMV_
ENUM
FORBID_
RMV_
ENUM
Parameter Parameter
Managed Ob- Ac-
name as in name as in Default Range Step
ject (MO) tion
module OSS
INTRAFRE- PhyCellI- PHYCEL- n1(n1) n1, n4, n8, n12, n16, n24, n32, n48, N/A Read
QBLKCELL dRange LID n64, n84, n96, n128, n168, n252,
RANGE n504
OTDOAInterFreqRSTDMeasSwitch
(OTDOAInterFreqRSTDMeasSwitch),
EmtcEcidSwitch(EmtcEcidSwitch),
EcidOptSwitch(EcidOptSwitch)
OtdoaSwitch~0, EcidInterFre-
qMeasSwitch~1, OTDOAInterFre-
qRSTDMeasSwitch~2, EmtcE-
cidSwitch~3, EcidOptSwitch~4
Parameter Parameter
Managed Ob- Ac-
name as in name as in Default Range Step
ject (MO) tion
module OSS
EuPrbSector
Eqm
(L.ChMeas.PRB.UL.Used.Avg, L.ChMeas.PRB.
UL.Avail)
(L.HHO.NCell.ExecAttOut [1526727294])
(L.HHO.NCell.ExecSuccOut [1526727295])
(L.HHO.NCell.ExecAttOut [1526727294])
(L.HHO.NCell.ExecSuccOut [1526727295])
Table 79: RAN KPIs used by LTE PCI Reuse Optimization module
• CM objects or parameters
Write
• PM counters
• CM objects or parameters
• RAN KPIs
Note:
PRCI modification is done when the user selects Plan PRCI and PRACHCONFIGINDEX-
CFGIND = CFG.
12.1 PM counters
The Huawei PM counters considered as inputs for the LTE PRACH Optimization module are listed in
the Table 81: Huawei PM counters for LTE PRACH Optimization.
Interval
Managed object
Counter ID Counter name Measurements (min-
(MO)
utes)
Interval
Managed object
Counter ID Counter name Measurements (min-
(MO)
utes)
Managed
Parameter name Parameter name
Object Default Range Step Action
as in module as in OSS
(MO)
Managed
Parameter name Parameter name
Object Default Range Step Action
as in module as in OSS
(MO)
2(CELL_BW_N25),
3(CELL_BW_N50),
4(CELL_BW_N75),
5(CELL_BW_N100)
Range
cfgind
CFG
Managed
Parameter name Parameter name
Object Default Range Step Action
as in module as in OSS
(MO)
CHALGO
Table 82: CM parameters for LTE PRACH Optimization without NAdC integration
Managed
Parameter name Parameter name
Object Default Range Step Action
as in module as in OSS
(MO)
FMT
Managed
Parameter name Parameter name
Object Default Range Step Action
as in module as in OSS
(MO)
3(CELL_BW_N50),
4(CELL_BW_N75),
5(CELL_BW_N100)
Range
INDEXCFGIND
HALGO SYMNUM
Managed
Parameter name Parameter name
Object Default Range Step Action
as in module as in OSS
(MO)
Table 83: CM parameters for LTE PRACH Optimization with NAdC integration
Note:
The PRACH PRBs related inconsistencies reported by the module are ignored if:
Users can use the EdenNet KPIs in Table 85: RAN KPIs (to identify need for PRACH optimization) to
identify the need for PRACH optimization.
Table 85: RAN KPIs (to identify need for PRACH optimization)
13 LMS Enforcement
Parameter
Managed Parameter name Additional informa-
name as in Default Range Step Action
Object (MO) as in OSS tion
module
UIN- NCELLRNCID NCELLRNCID Same Same Same Modify, Cell relation man-
TRAFREQ as RAN as RAN as RAN delete aged objects
OSS OSS OSS
NCELL Listed attributes are
used for neighbor
UIN- RNCID RNCID Same Same Same Modify,
cell identification
TRAFREQ as RAN as RAN as RAN delete
and for UMTS, the
OSS OSS OSS
NCELL Selection Priority
and RRCListType,
UIN- NCELLID NCELLID Same Same Same Modify,
and are set through
TRAFREQ as RAN as RAN as RAN delete
the module. All other
OSS OSS OSS
NCELL attribute values can
be set through the
UIN- CELLID CELLID Same Same Same Modify,
LMS templates.
TRAFREQ as RAN as RAN as RAN delete
OSS OSS OSS
NCELL
UINTER- NCELLRNCID NCELLRNCID Same Same Same Modify, Cell relation man-
FREQ as RAN as RAN as RAN delete aged objects
OSS OSS OSS
NCELL Listed attributes are
used for neighbor
cell identification
Parameter
Managed Parameter name Additional informa-
name as in Default Range Step Action
Object (MO) as in OSS tion
module
UINTER- RNCID RNCID Same Same Same Modify, and for UMTS, the
FREQ as RAN as RAN as RAN delete Selection Priority
OSS OSS OSS and RRCListType,
NCELL
and are set through
UINTER- NCELLID NCELLID Same Same Same Modify, the module. All other
FREQ as RAN as RAN as RAN delete attribute values can
OSS OSS OSS be set through the
NCELL
LMS templates.
UINTER- CELLID CELLID Same Same Same Modify,
FREQ as RAN as RAN as RAN delete
OSS OSS OSS
NCELL
U2GNCELL RNCID RNCID Same Same Same Modify, Cell relation man-
as RAN as RAN as RAN delete aged objects
OSS OSS OSS
Listed attributes are
U2GNCELL SIB11IND SIB11IND Same Same Same Modify, used for neighbor
as RAN as RAN as RAN delete cell identification
OSS OSS OSS and for UMTS, the
Selection Priority
U2GNCELL CELLID CELLID Same Same Same Modify,
and RRCListType,
as RAN as RAN as RAN delete
and are set through
OSS OSS OSS
the module. All other
U2GNCELL GSMCELLIN- GSMCELLINDEX Same Same Same Modify, attribute values can
DEX as RAN as RAN as RAN delete be set through the
OSS OSS OSS LMS templates.
Parameter
Managed Parameter name Additional informa-
name as in Default Range Step Action
Object (MO) as in OSS tion
module
through the
LMS)
UTRANN- utrancellid utrancellid Same Same Same Modify, Cell relation man-
CELL as RAN as RAN as RAN delete aged objects
OSS OSS OSS
Listed attributes are
UTRANN- mnc mnc Same Same Same Modify, used for neighbor
CELL as RAN as RAN as RAN delete cell identification.
OSS OSS OSS All other attribute
values can be set
UTRANN- mcc mcc Same Same Same Modify,
through the LMS
CELL as RAN as RAN as RAN delete
templates.
OSS OSS OSS
Parameter
Managed Parameter name Additional informa-
name as in Default Range Step Action
Object (MO) as in OSS tion
module
• PM counters
• CM objects or parameters
• RAN KPIs
14.1.1 PM counters
Huawei PM counters considered as inputs for LTE MLB module are listed in the Table 87: Huawei PM
counters for LTE MLB.
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
ter-Cell Han-
dover Perfor-
mance
Parameter
Managed Object Parameter
name as in Default Range step Action
(MO) name as in OSS
module
Parameter
Managed Object Parameter
name as in Default Range step Action
(MO) name as in OSS
module
dB-1, dB0,
dB1, dB2,
dB3, dB4,
dB5, dB6,
dB8, dB10,
dB12, dB14,
dB16, dB18,
dB20, dB22,
dB24
• PM counters
• CM objects or parameters
• RAN KPIs
14.2.1 PM counters
Huawei PM counters considered as inputs for LTE MLB 2.0 module are listed in the Table 90: Huawei
PM counters for LTE MLB 2.0.
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Managed Interval
Counter ID Counter name Measurements
object (MO) (minutes)
Parameter
Managed Object Parameter
name as in Default Range step Action
(MO) name as in OSS
module
Parameter
Managed Object Parameter
name as in Default Range step Action
(MO) name as in OSS
module
Modify
CFG:1 Modify
Note: If SMEASUREIND is NOT_CFG, then the module will not propose change for SMEASURE.
14.3 3G MLB
The following details for WCDMA MLB are captured:
• PM counters
• CM objects or parameters
• RAN KPIs
• Commands
14.3.1 PM counters
The Huawei PM counters considered as inputs for WCDMA MLB module are listed in the Table 93:
Huawei PM counters for WCDMA MLB.
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
using prop-
agation de-
lay distribu-
tion
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
RRC Connection Rejects for The sum of Radio Resource Con- Congestion detection
Congestion Reasons troller (RRC) connection rejects for
cell due to congestion in uplink (UL)
and downlink (DL).
Voice Erlangs The average number of circuit switch Rollback based on traffic KPI
(CS) connections using speech ser- degradation
vice.
HSDPA Erlangs The average Number of High Speed Rollback based on traffic KPI
Downlink Packet Access (HSDPA) degradation
user equipment connections in a cell.
14.3.4 Commands
The list of MML type of commands used by the WCDMA MLB are:
• LST NE
• REG NE
• LST UPCPICH
• LST/MOD UCELL
• LST/MOD UINTERFREQNCELL
where:
• LST command is used to list the managed object (MO) or Network Element (NE)
• MOD command is used to modify the MO
• ADD command is used to adds the MO
• REG command is used to register with the network element
• PM counters
• CM objects or parameters
• RAN KPIs
14.4.1 PM counters
The Huawei PM counters considered as inputs for WCDMA MLB 2.0 module are listed in the Table 96:
Huawei PM counters for WCDMA MLB 2.0.
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
check-
ing traffic
degrada-
tion in the
cell
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
degrada-
tion in the
cell
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
tion in the
cell
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
footprint
using prop-
agation de-
lay distribu-
tion
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
Managed Inter-
Counter
object Counter name Measurements val (min- Usage
ID
(MO) utes)
RRC Connection Rejects for The sum of Radio Resource Con- Congestion detection
Congestion Reasons troller (RRC) connection rejects for
cell due to congestion in uplink (UL)
and downlink (DL).
Voice Erlangs The average number of circuit switch Rollback based on traffic KPI
(CS) connections using speech ser- degradation
vice.
HSDPA Erlangs The average Number of High Speed Rollback based on traffic KPI
Downlink Packet Access (HSDPA) degradation
user equipment connections in a cell.
• PM counters
• CM objects or parameters
• RAN KPIs
15.1.1 PM counters
The Huawei PM counters considered as inputs for LTE MRO module are listed in the Huawei PM
counters for LTE MRO table.
Interval
Managed object
Counter ID Counter name Measurements (min-
(MO)
utes)
Interval
Managed object
Counter ID Counter name Measurements (min-
(MO)
utes)
Interval
Managed object
Counter ID Counter name Measurements (min-
(MO)
utes)
Interval
Managed object
Counter ID Counter name Measurements (min-
(MO)
utes)
Managed Parameter
Parameter name as
name as in Default Range Step Action
Object (MO) in OSS
module
Managed Parameter
Parameter name as
name as in Default Range Step Action
Object (MO) in OSS
module
Note: For the parameters CIO, qOffset, and qHyst, when the new calculated value
(new_value) does not appear in the enumerated value, the pushed_value should follow
the following rules:
If the value is not one of the enumerated values, then take the next lowest (in absolute
value) value, or:
Managed Parameter
name as in Parameter name as in OSS Default Range Step Action
Object (MO)
module
Managed Parameter
name as in Parameter name as in OSS Default Range Step Action
Object (MO)
module
Managed Parameter
name as in Parameter name as in OSS Default Range Step Action
Object (MO)
module
HYST, DB16_Q_
HYST, DB18_Q_
HYST, DB20_Q_
HYST, DB22_Q_
HYST, DB24_Q_
HYST]
LTE_HOA Handover Attempts, the number of Execution Attempts for handing over
from the source cell to the target cell
• PM counters
• CM objects or parameters
• RAN KPIs
15.2.1 PM counters
The Huawei PM counters considered as inputs for Intra inter frequency LTE MRO module are listed in
the Huawei PM counters for Intra inter frequency LTE MRO table.
Table 104: Huawei PM counters for Intra inter frequency LTE MRO
Managed Parameter
Parameter name as in
name as in Default Range Step Action
Object (MO) OSS
module
Managed Parameter
Parameter name as in
name as in Default Range Step Action
Object (MO) OSS
module
Managed Parameter
Parameter name as in
name as in Default Range Step Action
Object (MO) OSS
module
2560ms,
5120ms
Managed Parameter
Object name as in Parameter name as in OSS Default Range Step Action
(MO) module
Managed Parameter
Object name as in Parameter name as in OSS Default Range Step Action
(MO) module
Managed Parameter
Object name as in Parameter name as in OSS Default Range Step Action
(MO) module
480ms, 512ms,
640ms, 1024ms,
1280ms, 2560ms,
5120ms}
LTE_HOA Handover Attempts, the number of Execution Attempts for handing over
from the source cell to the target cell
Table 107: RAN KPIs used by Intra inter frequency LTE MRO module
For example,
BE1947_U_3
BSC ID Parameter for all the cells in that BSC will be excluded.
For example,
BSC6900GSMNE=AGIND6R
Table 108: Node List in Parameter-Node exclusion sheet and PCE behavior
BSC Parameter for all the cells in that BSC will be audited/en-
forced.
For example,
BE1947_U_3
BSC ID Parameter for all the cells in that BSC will be excluded.
For example,
BSC6900GSMNE=AGIND6R
Table 110: Node List in Parameter-Node exclusion sheet and PCE behavior
For example,
BE1947_U_3
RNC ID Parameter for all the cells in that RNC will be excluded.
For example,
BSC6900UMTSNE=BI0514_RNC_
FER4
Table 112: Node List in Parameter-Node exclusion sheet and PCE behavior
RNC Parameter for all the cells in that RNC will be audited/en-
forced.
For example,
BE1947_U_3
RNC ID Parameter for all the cells in that RNC will be excluded.
For example,
BSC6900UMTSNE=BI0514_RNC_
FER4
Table 114: Node List in Parameter-Node exclusion sheet and PCE behavior
For example,
BE1947_U_3
MRBTS ID Parameter for all the cells in that eNodeB will be excluded.
Example: eNodeB-280
LTE ID Parameter for all the cells in that LTE network will be ex-
cluded.
For example,
H4GN-1
MRBTS Parameter for all the cells in that eNodeB will be audited/
enforced.
LTE Parameter for all the cells in that LTE network will be audit-
ed/enforced.
17.1 PM counters
The Huawei PM counters considered as inputs for WCDMA RCO module are listed in the Table 118:
Huawei PM counters for WCDMA RCO.
17.4 Commands
The list of MML type of commands used by the WCDMA RCO are:
• LST NE
• REG NE
• LST/MOD UCELL
where:
• LST command is used to list the managed object (MO) or Network Element (NE)
• MOD command is used to modify the MO
• ADD command is used to adds the MO
• REG command is used to register with the network element
• PM counters
• CM objects or parameters
• RAN KPIs
18.1.1 PM counters
The Huawei PM counters considered as inputs for Remedy Module Orchestrator module are listed in
the table.
ter-Cell Han-
dover Perfor-
mance
Managed
Parameter name as in mod-
Object Parameter name as in OSS Default Range Step Action
ule
(MO)
Note: Number of
Resource Blocks
(RB) can be found
from the dlChan-
nelBandwidth pa-
rameter of Cell ob-
ject in Huawei. For
more information,
Managed
Parameter name as in mod-
Object Parameter name as in OSS Default Range Step Action
ule
(MO)
1.4 CELL_BW_N6 6
3 CELL_BW_N15 15
5 CELL_BW_N25 25
10 CELL_BW_N50 50
15 CELL_BW_N75 75
20 CELL_BW_N100 100
KPI Name
LTE_E_RAB_Accessibility
LTE_RRC_Setup_Success_Rate
E_UTRAN_E_RAB_Drop_Ratio
LTE_DL_User_Throughput
LTE_UL_User_Throughput
LTE_Problematic_Handover_Ratio
LTE_Handover_Success_Ratio
LTE_WCDMA_Problematic_PSHO_Ratio
LTE_WCDMA_PSHO_Success_Ratio
LTE_WCDMA_Problematic_VoLTE_Handover_Ratio
LTE_WCDMA_VoLTE_Handover_Success_Ratio
KPI Name
LTE_RACH_Setup_Completes_Rate
LTE_Cell_Availability
LTE_IRAT_Handover_Success_Ratio