Rubik Cube Solution: Irst Ayer
Rubik Cube Solution: Irst Ayer
A. FIRST LAYER:
Keep this layer at top. Assume that the color of this layer is blue (i.e. the color of the centre cube of this layer)
is blue
Bottom
A2-c) FLD² lf
2/4
Rubik Cube Solution
B. MIDDLE LAYER:
Rotate the entire cube to make the completed top face as bottom face and complete the middle layer. Use the
following algorithms depending upon appropriate scenarios.
Front Front
B1-a) ulULUFuf B1-b) URurufUf
C. LAST LAYER:
Rotate the entire cube to make the last layer as top face. Assume that the color of this layer is red.
C1) First Step:
Establish a red cross.
Target
Use the following algorithms depending upon appropriate scenarios.
Top
C1-d) FRUruf
C1-a) FRUruf C1-b) FRUruf C1-c) FRUruf
C2-a) RUruRU²rU
3/4
Rubik Cube Solution
C3-a) URulUruL
If CW cycling is needed, then apply the above algorithm twice.
If no cube is in correct position, then first apply the above algorithm once or twice to get atleast one
cube in correct position. Then rotate the entire cube to get this cube at FRU corner. After that apply the
above algorithm (possibly twice if CW cycling is needed) to position all the cubes in their correct
positions
C4) Fourth Step:
Reorient the corner cubes so that their upper faces are red.
Position the cube, to be reoriented, at FRU position. Next apply the following algorithm twice to cycle
the F, R & U faces in CCW direction. CW direction cycling will require additional 2 application of the
same algorithm
Up Face Up face
Right face
Right face
Top
Front
B1-b) URurufUf
Front Right
Target
Target
Up Face
Top
Right face
Up face
Right face
Front face
FRU cube
C4-a) (rdRD) 4