Scribd
Upload
2K views

Column Data Sheet Distillation Column (T-2010)

This document provides specifications for a distillation column. It has two sections: 1) A liquid-liquid extractor column with 1 top tray and 9 bottom trays made of an unspecified material. It lists various dimensions, pressures, temperatures and flow rates for this section. 2) A reboiled absorber column with 1 top tray and 16 bottom sieve trays. It also lists dimensions, pressures, temperatures and flow rates for this section. Mechanical specifications like materials, dimensions and corrosion allowances are noted to be provided by detailed engineering for both sections.

Uploaded by

John Patrick Sanay Nunez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views

Column Data Sheet Distillation Column (T-2010)

This document provides specifications for a distillation column. It has two sections: 1) A liquid-liquid extractor column with 1 top tray and 9 bottom trays made of an unspecified material. It lists various dimensions, pressures, temperatures and flow rates for this section. 2) A reboiled absorber column with 1 top tray and 16 bottom sieve trays. It also lists dimensions, pressures, temperatures and flow rates for this section. Mechanical specifications like materials, dimensions and corrosion allowances are noted to be provided by detailed engineering for both sections.

Uploaded by

John Patrick Sanay Nunez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 12

COLUMN JOB No. DOC No.

REV
DATA SHEET LT-DS-04-T-4010
0
DATE __04-May-22___SHEET___01__OF___01___
DISTILLATION COLUMN (T-2010) PREP’D CB, FL, EG, PM, JN
CHECK’D JN
APP’D SMA

Service: Liquid-liquid Ectractor Column ITEM No. 01

Section or Case TOP BOTTOM


Tray Number from Top or Bottom #1 #2 - #10
Total Trays in Section 1 9
Type of Tray By Detailed Engineering
Tray Diameter mm 1, 500
Tray Space mm 500
Weir Height mm 50
Weir Length mm 1, 200
Number of Liquid Passes By Detailed Engineering
Allow./Calc. Press. Drop (bar/Tray) By Detailed Engineering
Req’d/Calc. Operating Range (%) By Detailed Engineering

INTERNAL CONDITION
Condition at
Flow Rate (kg/hr) 1.175 x 105
Density (kg/m3) 1207
Pressure (barg) 0.62
Temperature (0C) 34.9

Vapor to Tray
Flow Rate (kg/hr) 6154
Density (kg/m3) 1000
Viscosity (cP) 0.72
Surface Tension (N/m) -
Liquid from Temperature (0C) 34.85
Tray
Foaming Tendency 1.00

MECHANICAL SPECIFICATIONS

Deck By Detailed Engineering


Cap By Detailed Engineering
Material Nuts & Bolts, Clamp & Washer By Detailed Engineering
Gasket By Detailed Engineering
Support Ring By Detailed Engineering
Dech Thickness (mm) By Detailed Engineering
Support Ring Width & Th’k (mm) By Detailed Engineering
Downcomer Bolt Bar Th’k (mm) By Detailed Engineering
Tray (Total) (mm) By Detailed Engineering
Tower Attachments (Total) (mm) By Detailed Engineering
Corrosion
Allowance
Manway Access (Bottom)

NOTES 1. Unless indicated in this sheet, the I.D. shall be per column drawing/data sheet.
REV DATE PREP’D CHK’D APPD REV DATE PREP’D CHK’D APPD

CB, FL,
EG, PM JN SMA
04-MAY-22

SKELETON OF TOWER

SIZE By Detailed Engineering QUANTITY 1 CODE


SPEC
DESIGN 4.8 barg 45 C0

OPERATING 3 barg 15 C0

SHOP HYDROSTATIC TEST barg


RADIOGRAPH
STRESS RELIEVE EFF. %

TOTAL CORRO.
TH’K ALLOW. MATERIALS
mm mm
HEADS - 4 KCS
SHELL - 4 KCS
INTERNALS - - SS316
TRAY - - SS316
INSULATION NO

TRAY SPACING By Detailed Engineering


TRAY TYPE By Detailed Engineering
GAUGE GLASS By Detailed Engineering
RELIEF VALVE By Detailed Engineering

ACCESSORIES APPLIED BY FABRICATOR


By Detailed Engineering
NOZZLES & MANHOLES
RATI
MARK No. SIZE NG/ SERVICE
FACI
NG
F 1 FEED
V 1 By Detailed VAPOR OUT
B 1 Engineering BOTTOM OUT
M 1 MANHOLE

NOTE 1. Tray pressure drop to be 0.01 bar

UNIT : EDC Purification Section (Unit 2000) REV DATE CHK’D APP’D
NAME OF VESSEL : Liq-liq Extractor Column 0 04-MAY-22 JN SMA
ITEM No. : 01

COLUMN JOB No. DOC No. REV


DATA SHEET LT-DS-04-T-4010
0
DATE __02-May-22___SHEET___01__OF___03 ___
DISTILLATION COLUMN (T-2020) PREP’D CB, FL, EG, PM, JN
CHECK’D JN
APP’D SMA

Service: Reboiled Absorber Column ITEM No. 02

Section or Case TOP BOTTOM


Tray Number from Top or Bottom #1 #2 - #17
Total Trays in Section 1 16
Type of Tray Sieve
Tray Diameter mm 1, 500
Tray Space mm 500
Tray/Packed Volume m3 0.88
Hold Up m3 0.088
Number of Liquid Passes By Detailed Engineering
Allow./Calc. Press. Drop (bar/Tray) By Detailed Engineering
Req’d/Calc. Operating Range (%) By Detailed Engineering

INTERNAL CONDITION
Condition at
Flow Rate (kg/hr) 283
Density (kg/m3) 1218
Pressure (barg) 125.5
Temperature (0C) 34.9

Vapor to Tray
Flow Rate (kg/hr) 9.33 x 103
Density (kg/m3) 1773
Viscosity (cP) 0.23
Surface Tension (N/m) -
Liquid from Temperature (0C) 136.5
Tray
Foaming Tendency 1.00

MECHANICAL SPECIFICATIONS

Deck By Detailed Engineering


Cap By Detailed Engineering
Material Nuts & Bolts, Clamp & Washer By Detailed Engineering
Gasket By Detailed Engineering
Support Ring By Detailed Engineering
Dech Thickness (mm) By Detailed Engineering
Support Ring Width & Th’k (mm) By Detailed Engineering
Downcomer Bolt Bar Th’k (mm) By Detailed Engineering
Tray (Total) (mm) By Detailed Engineering
Tower Attachments (Total) (mm) By Detailed Engineering
Corrosion
Allowance
Manway Access (Bottom)

NOTES 1. Unless indicated in this sheet, the I.D. shall be per column drawing/data sheet.
REV DATE PREP’D CHK’D APPD REV DATE PREP’D CHK’D APPD

CB, FL,
EG, PM JN SMA
04-MAY-22

SKELETON OF TOWER

SIZE By Detailed Engineering QUANTITY 1 CODE


SPEC
DESIGN 4.8 barg 64 C0

OPERATING 3 barg 34 C0

SHOP HYDROSTATIC TEST barg


RADIOGRAPH
STRESS RELIEVE EFF. %

TOTAL CORRO.
TH’K ALLOW. MATERIALS
mm mm
HEADS - 4 KCS
SHELL - 4 KCS
INTERNALS - - SS316
TRAY - - SS316
INSULATION NO

TRAY SPACING By Detailed Engineering


TRAY TYPE By Detailed Engineering
GAUGE GLASS By Detailed Engineering
RELIEF VALVE By Detailed Engineering

ACCESSORIES APPLIED BY FABRICATOR


By Detailed Engineering

NOZZLES & MANHOLES


RATI
MARK No. SIZE NG/ SERVICE
FACI
NG
F 1 FEED
V 1 By Detailed VAPOR OUT
B 1 Engineering BOTTOM OUT
M 1 MANHOLE

NOTE 2. Tray pressure drop to be 0.01 bar

UNIT : EDC Purification Section (Unit 2000) REV DATE CHK’D APP’D
NAME OF VESSEL : Reboiled Absorber 0 04-MAY-22 JN SMA
Column
ITEM No. : 02

COLUMN JOB No. DOC No. REV


DATA SHEET LT-DS-04-T-4010
0
DATE __04-May-22___SHEET___01__OF___05___
DISTILLATION COLUMN (T-4010) PREP’D CB, FL, EG, PM, JN
CHECK’D JN
APP’D SMA

Service: VCM Purification Column ITEM No. 03

Section or Case TOP BOTTOM


Tray Number from Top or Bottom #1 - #10 #11 - #20
Total Trays in Section 10 10
Type of Tray Sieve
Tray Diameter mm 1, 500
Tray Space mm 550
Tray/Packed Volume m3 0.97
Hold Up m3 0.088
Number of Liquid Passes By Detailed Engineering
Allow./Calc. Press. Drop (bar/Tray) By Detailed Engineering
Req’d/Calc. Operating Range (%) By Detailed Engineering

INTERNAL CONDITION
Condition at
Flow Rate (kg/hr) 1527
Density (kg/m3) 232
Pressure (barg) 15.21
Temperature (0C) -10.4

Vapor to Tray
Flow Rate (kg/hr) 578
Density (kg/m3) 998
Viscosity (cP) 0.15
Surface Tension (N/m) 9.38
Liquid from Temperature (0C) 100
Tray
Foaming Tendency 1.00

MECHANICAL SPECIFICATIONS

Deck By Detailed Engineering


Cap By Detailed Engineering
Material Nuts & Bolts, Clamp & Washer By Detailed Engineering
Gasket By Detailed Engineering
Support Ring By Detailed Engineering
Dech Thickness (mm) By Detailed Engineering
Support Ring Width & Th’k (mm) By Detailed Engineering
Downcomer Bolt Bar Th’k (mm) By Detailed Engineering
Tray (Total) (mm) By Detailed Engineering
Tower Attachments (Total) (mm) By Detailed Engineering
Corrosion
Allowance
Manway Access (Bottom)

NOTES 1. Unless indicated in this sheet, the I.D. shall be per column drawing/data sheet.
REV DATE PREP’D CHK’D APPD REV DATE PREP’D CHK’D APPD

CB, FL,
EG, PM JN SMA
04-MAY-22

SKELETON OF TOWER

SIZE By Detailed Engineering QUANTITY 1 CODE


SPEC
DESIGN 17 barg 65.2 C0

OPERATING 15 barg 35.2 C0

SHOP HYDROSTATIC TEST barg


RADIOGRAPH
STRESS RELIEVE EFF. %

TOTAL CORRO.
TH’K ALLOW. MATERIALS
mm mm
HEADS - 4 KCS
SHELL - 4 KCS
INTERNALS - - SS316
TRAY - - SS316
INSULATION NO

TRAY SPACING By Detailed Engineering


TRAY TYPE By Detailed Engineering
GAUGE GLASS By Detailed Engineering
RELIEF VALVE By Detailed Engineering

ACCESSORIES APPLIED BY FABRICATOR


By Detailed Engineering

NOZZLES & MANHOLES


RATI
MARK No. SIZE NG/ SERVICE
FACI
NG
F 1 FEED
V 1 By Detailed VAPOR OUT
B 1 Engineering BOTTOM OUT
M 1 MANHOLE

NOTE 3. Tray pressure drop to be 0.01 bar

UNIT : VCM Purification Section (Unit 4000) REV DATE CHK’D APP’D
NAME OF VESSEL : VCM Distillation Column 0 04-MAY-22 JN SMA
ITEM No. : 03

COLUMN JOB No. DOC No. REV


DATA SHEET LT-DS-04-T-4010
0
DATE __04-May-22___SHEET___01__OF___07___
DISTILLATION COLUMN (T-5010) PREP’D CB, FL, EG, PM, JN
CHECK’D JN
APP’D SMA
Service: VCM Purification Column ITEM No. 04

Section or Case TOP BOTTOM


Tray Number from Top or Bottom #1 - #9 #10 - #19
Total Trays in Section 9 10
Type of Tray Sieve
Tray Diameter mm 1, 500
Tray Space mm 550
Tray/Packed Volume m3 0.97
Hold Up m3 0.088
Number of Liquid Passes By Detailed Engineering
Allow./Calc. Press. Drop (bar/Tray) By Detailed Engineering
Req’d/Calc. Operating Range (%) By Detailed Engineering

INTERNAL CONDITION
Condition at
Flow Rate (kg/hr) 948
Density (kg/m3) 232
Pressure (barg) 15.21
Temperature (0C) -10.4

Vapor to Tray
Flow Rate (kg/hr) 578
Density (kg/m3) 998
Viscosity (cP) 0.15
Surface Tension (N/m) 9.38
Liquid from Temperature (0C) 100
Tray
Foaming Tendency 1.00

MECHANICAL SPECIFICATIONS

Deck By Detailed Engineering


Cap By Detailed Engineering
Material Nuts & Bolts, Clamp & Washer By Detailed Engineering
Gasket By Detailed Engineering
Support Ring By Detailed Engineering
Dech Thickness (mm) By Detailed Engineering
Support Ring Width & Th’k (mm) By Detailed Engineering
Downcomer Bolt Bar Th’k (mm) By Detailed Engineering
Tray (Total) (mm) By Detailed Engineering
Tower Attachments (Total) (mm) By Detailed Engineering
Corrosion
Allowance
Manway Access (Bottom)

NOTES 1. Unless indicated in this sheet, the I.D. shall be per column drawing/data sheet.

REV DATE PREP’D CHK’D APPD REV DATE PREP’D CHK’D APPD
CB, FL,
EG, PM JN SMA
04-MAY-22

SKELETON OF TOWER

SIZE By Detailed Engineering QUANTITY 1 CODE


SPEC
DESIGN 5.6 barg 92.2 C
0

OPERATING 3.9 barg 62.2 0


C
SHOP HYDROSTATIC TEST barg
RADIOGRAPH
STRESS RELIEVE EFF. %

TOTAL CORRO.
TH’K ALLOW. MATERIALS
mm mm
HEADS - 4 KCS
SHELL - 4 KCS
INTERNALS - - SS316
TRAY - - SS316
INSULATION NO

TRAY SPACING By Detailed Engineering


TRAY TYPE By Detailed Engineering
GAUGE GLASS By Detailed Engineering
RELIEF VALVE By Detailed Engineering

ACCESSORIES APPLIED BY FABRICATOR


By Detailed Engineering

NOZZLES & MANHOLES


RATI
MARK No. SIZE NG/ SERVICE
FACI
NG
F 1 FEED
V 1 By Detailed VAPOR OUT
B 1 Engineering BOTTOM OUT
M 1 MANHOLE

NOTE 4. Tray pressure drop to be 0.01 bar

UNIT : VCM Purification Section (Unit 5000) REV DATE CHK’D APP’D
NAME OF VESSEL : VCM Distillation Column 0 04-MAY-22 JN SMA
ITEM No. : 04

You might also like