Scribd
Upload
18 views

GST Conventional Devices

The document describes the C-9503 Short Circuit Loop Isolator. It isolates faulty parts of a detector loop when a short circuit occurs, allowing other devices on the unaffected part of the loop to continue operating normally. It automatically resets once the fault is cleared. Key features include isolating up to 32 devices, LED status indicators, compatibility with GST fire alarm panels, and automatic fault detection and reset capabilities.

Uploaded by

firex sp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views

GST Conventional Devices

The document describes the C-9503 Short Circuit Loop Isolator. It isolates faulty parts of a detector loop when a short circuit occurs, allowing other devices on the unaffected part of the loop to continue operating normally. It automatically resets once the fault is cleared. Key features include isolating up to 32 devices, LED status indicators, compatibility with GST fire alarm panels, and automatic fault detection and reset capabilities.

Uploaded by

firex sp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Short Circuit

Loop Isolator
C-9503

548f(cl-5) 0832-CPD-0839

Description Features and Benefits


In the event of short circuit on the detector loop the C-9503 Isolators 1. In the event of a short circuit isolates faulty parts of the loop.
either side of the loop will defect the problem and open circuit and 2. Automatically resetting once the fault has cleared
isolates the faulty part of the loop, enabling other devises on the 3. can monitor up to 32 devices
unaffected part of the loop to operate normally. 4. Detector Base Isolator also available (C-9504)
5. LED status indicator
The module will continue to monitor for the fault to be repaired, once
the fault is cleared the isolator will automatically reinstate the effected
part of the loop.

Technical Specifications Mounting Isolator Module

 Standard: EN 54-17
 Approval: LPCB, CE-CPD The isolator circuit should be installed in compliance with all local
 Operating voltage: 24VDC (16VDC~28VDC) codes having a jurisdiction in your area or BS 5389 Part 1 and EN54.
 Standby Current: 3mA Do not remove red plastic dust cover until the final handover is done.
 Operating Current: 15m 
 Protection rating: IP 30
 Operating temperature: 0°C to +49°C
 Relative humidity: 93%
 Application: Indoor use
 Visual Indicator: twin LED, Red ( lit steady when alarm, 3
sec interval blinking at normal state)



Material and colour: ABS, white (RAL9016)
 Wiring: 1 pair- polarized
 Dimensions: 120mm x 80mm x 39mm



Global System Technology PLC DATA SHEET


www.gst.uk.com Note: Specifications are subject to change without notice.
Wiring and Connection Detector Installation

Connect the wires to the required terminal according to the wiring Connect as per the marking on the base.
diagram. The cable must be fire rated type and the size depends on
the distance and application. Minimum size gauge 1.0mm²(18 AWG)
Selection of compatible Control Panels

 Compatible with all GST Intelligent Fire Alarm Panels GST200-2,
GST5000, GSTIFP8.

  

        Ordering Information

Part Number: C-9503


        Description: Loop Isolator

 
  
Weight / Kg.: 0.100
Pack Qty. per Box: 80



MANUFACTURED IN ACCORDANCE WITH

Global System Technology PLC DATA SHEET


www.gst.uk.com Note: Specifications are subject to change without notice.

You might also like