Scribd
Upload
25 views

Aditya Bhokare: Education

Aditya Bhokare is a mechanical engineering student at Vishwakarma Institute of Technology, Pune with a SGPA of 9.8 and CGPA of 9.1. He has experience as the Chassis Lead and Cost Head at Veloce Racing India where he helped design and manufacture a performance oriented FSAE vehicle chassis. He also had a remote internship at Decibels Lab Corp working on mechanical system modeling projects in Scilab and Xcos. Currently he is working on a project at Chintamani Thermal Tech Pvt. Ltd. to design a fixture table for a plate type heat exchanger. His academic projects include designing a welding fixture for an FSAE

Uploaded by

Aditya Bhokare
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

Aditya Bhokare: Education

Aditya Bhokare is a mechanical engineering student at Vishwakarma Institute of Technology, Pune with a SGPA of 9.8 and CGPA of 9.1. He has experience as the Chassis Lead and Cost Head at Veloce Racing India where he helped design and manufacture a performance oriented FSAE vehicle chassis. He also had a remote internship at Decibels Lab Corp working on mechanical system modeling projects in Scilab and Xcos. Currently he is working on a project at Chintamani Thermal Tech Pvt. Ltd. to design a fixture table for a plate type heat exchanger. His academic projects include designing a welding fixture for an FSAE

Uploaded by

Aditya Bhokare
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Aditya Bhokare

[email protected]| (+91) 9112642884


[email protected]
EDUCATION
❖ Mechanical Engineering | Vishwakarma Institute Of Technology, Pune SGPA: 9.8, CGPA: 9.1 | (2019 - 23)
❖ Arihant College of Arts Science and Commerce (HSC), Pune 12th Perecentage - 80 % |(2017-19)
❖ Aaryans World School (CBSE) ,Pune 10th Percentage - 94.4% | (2017)
SPECIAL SKILLS
❖ CAD Software – Solidworks
❖ Simulation – MATLAB/ Simulink, Scilab/ Xcos
❖ Programming Languages – C++
❖ Management and Personal – MS Office ( Word, Presentation, Excel), Leadership, Team Management

EXPERIENCE
❖ Chassis Lead and Cost Head | Veloce Racing India, Pune (Aug 19’ – Present)
Designing and manufacturing of a performance oriented FSAE vehicle chassis.
▪ Overall 2nd in Formula Bharat 2020, National level competiton with 30+ teams
▪ Overall 4th in Formula Student Electric Vehicles Challenge 2020 with Award for Notable Mention
▪ Overall 10th in Formula Bharat Virtuals 2021 with around 60 teams
❖ Remote Internship | Decibels Lab Corp, Bangalore ( July 21’ - Aug 21’)
Internship on Model based design of Mechanical Systems with following projects : 1) Simulation of Vehicle Resistive Forces 2) Spring mass
damper 3) NiMh battery modeling 4) Thermal Modeling of House
(all projects were performed on Scilab and Xcos) .
❖ Industry Project at Chintamani Thermal Tech Pvt. Ltd. ( May 22’ – Present )
Design of fixture Table for a Plate Type Heat Exchanger with Forced Convection Cooling, Designed a extrusion based jig and fixture for assembly and
welding of all components of the Heat Exchanger. Provisions for customizability for various sizes and specifications.

ACADEMIC PROJECTS
❖ Custom Welding Fixture Assembly For FSAE Chassis

▪ Designed and manufactured a custom fixture assembly for welding an FSAE spaceframe chassis with supporting mounts for Suspension,
Brakes, Steering, Power-train and Drive-train assembly with a linear accuracy of 5 mm.

❖ Design optimization of a Epicyclic Gear Train using Genetic Algorithm–


▪ Designed and modeled a planetary gear train along with secondary components like shafts, bearings and casing.
▪ CAD model design using DFMA principles in Solidworks.
▪ Used MATLAB genetic algorithm model to optimize the c-to-c distance, gear ratio, pitch cycle diameter and module of gears and PGT.

❖ Design and Manufacturing of an External Gear Pump –


▪ An external gear pump for 4 LPM discharge and 6 bar pressure was designed.
▪ Used Lames theory to design pressure vessel for external casing
▪ Spur gear designed using beam strength theory.
▪ Prototype was 3D printed using PLA

❖ Design and Manufacturing of a Carbon Fibre Seat Using Custom Mould


▪ Manufactured a carbon fibre(PAN) and epoxy seat for a FSAE vehicle
▪ Mould design based on driver shape and comfort using expandable foam
▪ Vacuum bagging was implemented for resign impregnation.

❖ Mathematical Modeling of Battery Thermal Management System


▪ Designed a Scilab model for the Total heat load calculation of a battery pack based on no. of cells in series and parallel
▪ The total volumetric flow rate of liquid coolant required in the adjoined heat exchanger is obtained.
▪ Parametric model for high customization and instantaneous result graphs.

❖ Social Activities – Best Teaching Volunteer in “Utkarsh” Activity, held to educate underpriviledged kids with basic secondary
educations by Social Welfare And Development Team, VIT.
❖ Personal Interests – FPS gaming, Football & F1.

You might also like