Scribd
Upload
45 views

Nokeval: 201 Loop Powered 4..20 Ma LED-display

The document describes the Nokeval 201 Loop Powered 4-20 mA LED-display. It is an autopowered LED display that requires no external power supply and operates using a 4-20 mA current input loop. It has a 240 ohm input resistance and displays measurements from -999 to +9999. The basic model 201 displays the process input, while model 202 includes two settable alarms. Both models allow for scaling, alarms, and password protection through front panel buttons.

Uploaded by

Wilmer Alexander Serna Torres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

Nokeval: 201 Loop Powered 4..20 Ma LED-display

The document describes the Nokeval 201 Loop Powered 4-20 mA LED-display. It is an autopowered LED display that requires no external power supply and operates using a 4-20 mA current input loop. It has a 240 ohm input resistance and displays measurements from -999 to +9999. The basic model 201 displays the process input, while model 202 includes two settable alarms. Both models allow for scaling, alarms, and password protection through front panel buttons.

Uploaded by

Wilmer Alexander Serna Torres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Nokeval www.nokeval.

com
sales.nokeval.com
Yrittajakatu 12
FIN-37100 Nokia
Tel.
Fax.
+358 3-342 4800
+358 3-342 2066

201 Loop Powered 4..20 mA LED-display

• For process input 4-20 mA


• Without external power supply
• Loop resistance 240 ohm only
• 4-digit processor based display
• Scaling on front panel
• 2 settable alarms
• Pass words for alarms and
configuration
• Front panel rating IP 65

Autopowered bright red LED-display 201 needs no exter- Technical specifications:


nal power supply. Current signal 4-20 mA provides the
necessary energy. Therefore, it is possible to install the Input 4..20 mA linear or square root
meter in places having no auxiliary power available. You Display scaling -999....+9999
can now replace the autopowered LCD-displays, having Desimal point Freely selectable
very poor visibility, by bright red LED-displays. Accuracy 0.05% of span
There are two models: basic model 201 without alarms Input resistance, 201 240 ohm (voltage drop = 5.0 V)
202 370 ohm (voltage drop = 7,3 V)
and model 202 with two alarm contacts.
Alarm relays (optio) 2 solid state relays (SSR),
Display scaling and configuration by front panel buttons. max. 250 VAC, 150 mA
Unit has digital filter for stabilizing the 4-digit display. Alarm mode High and low level
In model 202 You may configure two optional alarms, high Hysteresis Selectable 0..100 %
and low. Password is settable for entering configuration Display 4-digit red LED, 14.5 mm,
and alarm stages. adjustable brightness
Front panel protection IP65. Front plate protection IP65 with gasket, without
gasket IP54
Push buttons Switches under front panel
Ambient temperature 0...+60 °C
Connection: Terminals Detachable 2,5 mm²
Weight 200 g
+ -
4 5 6 7 1 2 3
Ordering examples:
Alarm low Basic model 201-4/20
With alarms 202-4/20
Input signal
Alarm High 4-20 mA

Typical application Dimensions (mm)

96 65
Alarm1

Alarm 2
48

Transmitter 10
4-20 mA 6
4-20 mA Cut out Gasket (IP65)
43.7 x 90,7 mm ± 0.7 mm

You might also like