METAL TECHNOLOGY-CANTERBO GMBH

Welding alloys - Special alloys

METAL TECHNOLOGY-CANTERBO GMBH

Welding alloys - Special alloys
1. Filler metals for welding stainless steels
Filler metals for welding heat resistant, non-scaling and highly
corrosion-proof steels
1. Filler
Filler metals
metals for
for joint
welding stainless
welding steels
austenitic/ferritic steels
Filler metals for welding heat resistant, non-scaling and highly
corrosion-proof steels
Filler metals
2. Filler metals for
for aluminium
joint welding austenitic/ferritic steels
welding
Filler metals for titanium welding

2. Filler metals for aluminium welding

Filler metals
3. Filler metals for
for welding
titaniummild
welding
steels and low-alloyed steels,
special electrode for chamfering

3. Filler metals for welding mild steels and low-alloyed steels,

specialmetals
4. Filler electrode for chamfering
for welding nickel, nickel alloys and cast iron

4. Filler metals for welding nickel, nickel alloys and cast iron
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

5. Filler metals for hard surfacing and repair welding on cold and
6. hot work
Filler as well
metals for as high speed
welding steels.
copper Cobalt base
and copper alloysalloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

7. Flux-cored wires
8. Approvals

8. Approvals

1.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. Filler metals for welding stainless steels

Filler metals for welding heat resistant, non-scaling and highly
For 40corrosion-proof
years now your competent partner for specialized trade in
steels
welding engineering.
Filler metals for joint welding austenitic/ferritic steels

MTC was started 1977 as a central stock-keeping wholesaler for welding wire
consumables.
2. Filler metals for aluminium welding
Filler metals for titanium welding
In the meantime MTC is supplying more than 1000 specialized dealers in
Germany and world-wide.
3. Filler metals for welding mild steels and low-alloyed steels,
You will soon discover that MTC´s most significant advantage lies in keeping an
special electrode for chamfering
extensive stock

all about 330 tons

4. Filler metals for welding nickel, nickel alloys and cast iron
of all current grades (250!) and diameters for immediate dispatch to the
customers.

5. Filler
MTC´s rangemetals for hard
comprises surfacing
a great varietyand repair welding
of MIG/TIG onwires
welding cold and
as well as
hot work as well as high speed steels. Cobalt base alloys
special purpose electrodes, special lengths, special spoolings and special
packages.

MTC6. isFiller
sellingmetals for welding
to specialized copper
trades and copper
exclusively. alloys
All MTC-approvals and -
certificates are available for the dealers.

MTC is working together with manufacturers und classification societies to

affect quality and further development of the welding wire consumables.
7. Flux-cored wires
With this guide MTC wants to give more support to the customers.

8. Approvals

3.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys
METAL - Special
TECHNOLOGY-CANTERBO GMBH alloys

Welding alloys - Special alloys

1. Filler metals for welding stainless steels

Filler metals for welding Approvals
heat resistant, non-scaling and highly
corrosion-proof steels
®
Filler metals for joint welding austenitic/ferritic steels
METAL TECHNOLOGY- CANTERBO GMBH
2. Filler metals for aluminium welding
Is admitted
Filler metals for titanium welding
to:

3. Filler metals forDIN EN

welding ISO
mild 9001:2008
steels and low-alloyed steels,
special electrode for chamfering
VdTÜV1153 und AD 2000-leaflet W0
4. Filler metals for welding nickel, nickel alloys and cast iron
TÜV Nord Certificate on factory production control
according to EN 13479; Annex ZA (CE Mark)
As5.the
Filler metals for hard surfacing and repair welding on cold and
individual approvals are continuously adapted to
hot work as well as high speed steels. Cobalt base alloys
the latest requirements, we ask you to request
authorizations if necessary,
6. Filler metals for welding copper and copper alloys
you can download the latest TÜV approvals from our
homepage.
(A general note is noted on the characteristic sheets).
7. Flux-cored wires
In the case of specific acceptance tests, the relevant
requirements must already be mentioned at the start-up
stage.
Particularly
8. Approvalswhen ordering, the scope of testing is to be
requested in advance.

1.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys
METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. Filler metals for welding stainless steels

Filler metals for welding heat resistant, non-scaling and highly
corrosion-proof steels
MIG / MAG – Solid Wire
Filler metals for joint welding austenitic/ferritic steels

2. Filler metals for aluminium welding

WIG / TIG - Rods
Filler metals for titanium welding

3.
MIG / MAG – Flux core wires
Filler metals for welding mild steels and low-alloyed steels,
special electrode for chamfering
Open Arc - Flux core wires
4. Filler metals for welding nickel, nickel alloys and cast iron
UP - Flux – Solid wire
5. Electrodes
Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

Braze
6. Filler metals for welding copper and copper alloys

Welding and soldering consumables for

7.
manufacturing and repair.
Flux-cored wires

®
8. METAL TECHNOLOGY-CANTERBO GMBH
Approvals
Robert-Bosch-Str. 11
D - 40668 Meerbusch - Lank
Telefon +492150 6090-0 Telefax +492150 6090-60
e-Mail: [email protected]
Internet: www.mtc-meerbusch.com

3.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1
METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. Filler metals for welding stainless steels

Filler metals for welding heat resistant, non-scaling and highly
Stainless steels
corrosion-proof steels 1
Filler Filler
metalsmetals
for welding stainless
for joint steels
welding austenitic/ferritic steels
Filler metals for welding heat resistant, non-scaling and highly
corrosion-proof steels
Filler metalsmetals
2. Filler for joint
forwelding
aluminiumaustenitic/ferritic
welding steels
Filler metals for titanium welding
MTC-Name Material No. AWS Page
MIG/TIG/UP MT-410 1.4009 ER 410 1.03
3. Filler metals
MIG/TIG MT-410 for welding mild
NiMo steels and ER
1.4351 low-alloyed
410 NiMo steels,1.04
Elektr. special electrode
MT-410 HLfor chamfering
1.4009 E 410-17 1.05
MIG/TIG MT-430 1.4015 ER 430 1.06
MIG/TIG MT-4115 1.4115 - 1.07
MIG/TIG MT-430 Ti 1.4502 ~ER 439 1.08
MIG/TIG/UP MT-308
4. Filler metals H welding nickel,
for - ~ER 308
nickel alloys andH cast iron
1.09
MIG/TIG/UP MT-308 L 1.4316 ER 308 LSi 1.10
Elektr. MT-308 L 1.4316 E 308 L-16 1.11
Elektr. MT-308 HL 1.4316 E 308 L-17 1.12
MIG/TIG/UP MT-347 1.4551 ER 347 Si 1.13
Elektr. MT-347 1.4551 E 347-16 1.14
5. Filler metals
MIG/TIG/UP MT-316 for
L hard surfacing
1.4430 and repair welding
ER 316 LSi on cold1.15and
Elektr. hot work as well
MT-316 L as high speed steels. Cobalt
1.4430 E 316 base
L-16 alloys 1.16
Elektr. MT-316 LV 1.4430 E 316 L-17 1.17
Elektr. MT-316 HL 1.4430 E 316 L-17 1.18
MIG/TIG/UP MT-318 1.4576 ER 318 Si 1.19
6. Filler metals
Elektr. MT-318for welding copper
1.4576 and copper
E 318 alloys
-16 1.20
MIG/TIG MT-4820 1.4820 ER 25 4 1.21
Elektr. MT-4820 1.4820 E 25 4 1.22
MIG/TIG/UP MT-309 1.4829 ER 309 Si 1.23
Elektr. MT-309 1.4829 E 309 H -16 1.24
MIG/TIG/UP MT-309 L 1.4332 ER 309 LSi 1.25
7. Flux-cored
Elektr. wires
MT-309 L 1.4332 E 309 L-16 1.26
MIG/TIG/UP MT-310 1.4842 ER 310 1.27
Elektr. MT-310 1.4842 E 310-16 1.28
Elektr. MT-310 B 1.4842 E 310-15 1.29
MIG/TIG/UP MT-4462 1.4462 ER 2209 1.30
Elektr. MT-4462 1.4462 E 2209 1.31
8. Approvals
Mig/Tig/UP MT-904 L 1.4519 ER 385 1.32
Elektr. MT-904 L 1.4519 E 385-17 1.33
MIG/TIG/UP MT-307 1.4370 ER 307 1.34
Elektr. MT-307 1.4370 E 307-16 1.35
Elektr. MT-307 B 1.4370 E 307-15 1.36
Elektr. MT-307 HL 1.4370 E 307-26 1.37
MIG/TIG/UP MT-312 1.4337 ER 312 1.38
Elektr. MT-312 1.4337 E 312-16 1.39
Elektr. MT-312 HL 1.4337 E 312-26 1.40
Elektr. MT-309 Mo 1.4459 E 309 MoL-16 1.41
MIG/TIG MT-Superduplex ~1.4410 ER 2594 1.42

1.11
 METAL
METALTECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Weldingalloys
alloys - - Special
Specialalloys
alloys 1
Allocation base material – filler material
1. Filler metals for welding stainless steels
Filler
Material No. metals
Short for
termwelding heat resistant, non-scaling
Filler metals MTC and Page
highly
1.4000 X7 Cr 13 MT-410 1.03 / 1.05
1.4001
corrosion-proof
X7 Cr 14
steels MT-410 1.03 / 1.05
1.4002 Filler metals for
X7 CrAl 13 joint welding austenitic/ferritic
MT-410 steels 1.03 / 1.05
1.4006 X10 Cr 13 MT-410 1.03 / 1.05
1.4008 G-X 12 Cr 14 MT-410 1.03 / 1.05
1.4016 X8 Cr 17 MT-430 Ti 1.08
2. Filler metals
1.4021 X20 Crfor
13 aluminium weldingMT-410 1.03 / 1.05
1.4024 X15 Cr 13 MT-410 1.03 / 1.05
1.4057 Filler metals for17titanium
X20 CrNi 2 weldingMT-430 1.06
1.4059 G-X CrNi 17 MT-430 1.06
1.4113 X6 Cr Mo 17 MT-430 Ti 1.08
1.4122 G–X 35 Cr Mo 17 MT-4115 1.07
3. Filler metals
1.4301 for
X5 CrNi 18 welding
10 mild steels andL low-alloyed
MT-308 / MT-347 steels,
1.10 / 1.13
1.4303 X4CrNi18-12 MT-308 L / MT-347 1.10 / 1.13
1.4306
special electrode
X2CrNi19-11
for chamfering MT-308 L / MT-347 1.10 / 1.13
1.4307 X2CrNi18-9 MT-308 L / MT-347 1.10 / 1.13
1.4308 GX5CrNi19-10 MT-308 L / MT-347 1.10 / 1.13
1.4311 X2CrNiN18-10 MT-308 L / MT-347 1.10 / 1.13
4. Filler metals
1.4312 for welding nickel, nickel
GX10CrNi18-8 MT-308alloys and cast iron
L / MT-347 1.10 / 1.13
1.4313 X3CrNiMo13-4 MT-410 NiMo 1.04
1.4318 X2CrNiN18-7 MT-308 L / MT-347 1.10 / 1.13
1.4340 GX40CrNi27-4 MT-4820 1.21 / 1.22
1.4347 GX6CrNiN26-7 MT-4820 1.21 / 1.22
1.4362 X2 CrNiN 23 4 MT-4462 1.30 / 1.31
5.
1.4401
Filler metals for hard
X5CrNiMo17-12-2
surfacing and repair welding
MT-316 / MT-318
on cold and
1.15 / 1.19
1.4404 hot workX2CrNiMo17-12-2
as well as high speed steels. Cobalt
MT-316 base alloys 1.15 / 1.19
/ MT-318
1.4406 X2CrNiMoN17-11-2 MT-316 / MT-318 1.15 / 1.19
1.4407 GX5CrNiMo13-4 MT-410 NiMo 1.04
1.4408 GX5CrNiMo19-11-2 MT-316 / MT-318 1.15 / 1.19
6. Filler metals
1.4410 for welding copper and
X2CrNiMoN25-7-4 copper alloys
MT-Superduplex 1.42
1.4414 GX4CrNiMo13-4 MT-410 NiMo 1.04
1.4420 X5 CrNiMo 18 11 MT-316 / MT-318 1.15 / 1.19
1.4426 GX10CrNiMoN15-4-2 MT-4462 1.30 / 1.31
1.4429 X2CrNiMoN17-13-3 MT-316 / MT-318 1.15 / 1.19
1.4435 X2CrNiMo18-14-3 MT-316 / MT-318 1.15 / 1.19
1.4436 X3CrNiMo17-13-3 MT-316 / MT-318 1.15 / 1.19
7. Flux-cored
1.4460 wires
X3CrNiMoN27-5-2 MT-4462 1.30 / 1.31
1.4462 X2CrNiMoN22-5-3 MT-4462 1.30 / 1.31
1.4463 GX6CrNiMo24-8-2 MT-4462 1.30 / 1.31
1.4464 GX40CrNiMo27-5 MT-4462 1.30 / 1.31
1.4468 GX2CrNiMoN25-6-3 MT-Superduplex 1.42
1.4469 GX2CrNiMoN26-7-4 MT-Superduplex 1.42
8. Approvals
1.4501 X2CrNiMoCuWN25-7-4 MT-Superduplex 1.42
1.4510 X8 CrTi 17 MT-430 Ti 1.08
1.4511 X8 CrNb 17 MT-430 Ti 1.08
1.4512 X2CrTi12 MT-307 1.34 / 1.35
1.4515 GX3CrNiMoCuN26-6-3 MT-Superduplex 1.42
1.4523 X8 CrMoTi 17 MT-430 Ti 1.08

1.01
1.01
 METAL TECHNOLOGY-CANTERBO GMBH
METAL TECHNOLOGY-CANTERBO
Welding alloys -
GMBH
Special alloys
Welding alloys - Special alloys

1. Filler metals Allocation

for welding base
stainless steels – filler material
material
Filler metals for welding heat resistant, non-scaling and highly
Material No. Short term Filler metals MTC Page
corrosion-proof
1.4529
steels
X1NiCrMoCuN25-20-7 MT-Nicro 625 4.10
Filler metalsGX2NiCrMoCuN20-18
1.4531 for joint welding austenitic/ferritic
MT-904 L steels 1.32 / 1.33
1.4539 X1NiCrMoCu25-20-5 MT-904 L 1.32 / 1.33
1.4541 X6CrNiTi18-10 MT-308 L / MT-347 1.10 / 1.13
1.4550 X6CrNiNb18-10 MT-308 H 1.09
2.1.4552
Filler metalsGX5CrNiNb19-11
for aluminium welding MT-308 L / MT-347 1.10 / 1.13
1.4558 X2NiCrAlTi32-20 MT-Nicro 625 4.10
Filler metalsX1NiCrMoCu
1.4562 for titanium
32 28welding
7 MT-4607 4.15
1.4563 X1NiCrMoCuN 31 27 4 MT-4607 4.15
1.4571 X6CrNiMoTi17-12-2 MT-316 L / MT-318 1.15 / 1.19
1.4573 GX3CrNiMoCuN24-6-5 MT-316 L / MT-318 1.15 / 1.19
3.1.4580
Filler metalsX6CrNiMoNb17-12-2
for welding mild steels and low-alloyed
MT-316 L / MT-318 steels, 1.15 / 1.19
1.4581 GX5CrNiMoNb19-11-2 MT-316 L / MT-318 1.15 / 1.19
special electrode
1.4582
for chamfering
X4CrNiMoNb25-7 MT-4462 1.30 / 1.31
1.4583 X10CrNiMoNb18-12 MT-316L / MT-318 1.15 / 1.19
1.4585 GX7CrNiMoCuNb18-18 MT-904 L 1.32 / 1.33
1.4586 X5NiCrMoCuNb22-18 MT-904 L 1.32 / 1.33
4.1.4724
Filler metalsX10CrAlSi13
for welding nickel, nickel alloys and cast iron 1.21 / 1.22
MT-4820
1.4729 GX40CrSi13 MT-309 1.23 / 1.24
1.4740 GX40CrSi17 MT-430 1.06
1.4742 X10CrAlSi18 MT-430 1.06
1.4815 GX8CrNi19-10 MT-308 H 1.09
1.4821 X15CrNiSi25-4 MT-4820 1.21 / 1.22
5.1.4822
Filler metalsGX40CrNi24-5
for hard surfacing and MT-4820
repair welding on cold1.21 and/ 1.22
hot work asGX40CrNiSi27-4
1.4823 well as high speed steels.MT-4820
Cobalt base alloys 1.21 / 1.22
1.4825 GX25CrNiSi18-9 MT-307 1.34 / 1.35
1.4826 GX40CrNiSi22-9 MT-309 1.23 / 1.24
1.4827 GX8CrNiNb19-10 MT-308 H 1.09
6.1.4828 X15CrNiSi20-12
Filler metals for welding copper andMT-309
copper alloys 1.23 / 1.24
1.4832 GX25CrNiSi20-14 MT-309 1.23 / 1.24
1.4833 X12CrNi23-13 MT-310 1.27 / 1.28
1.4837 GX40CrNiSi25-12 MT-310 1.27 / 1.28
1.4840 GX15CrNi25-20 MT-310 1.27 / 1.28
1.4841 X15CrNiSi25-21 MT-310 1.27 / 1.28
1.4845 X8CrNi25-21 MT-310 1.27 / 1.28
7.1.4876
Flux-cored X10NiCrAlTi32-21
wires MT-82 4.07
1.4878 X8CrNiTi18-10 MT-308 H 1.09
1.4948 X6CrNi18 11 MT-308 H 1.09
1.6902 GX6CrNi18-10 MT-308 L 1.10
1.6905 GX5CrNiNb18-10 MT-308 L 1.10
1.6907 X3CrNiN18-10 MT-308 L 1.10
8. 1.6909
Approvals X5CrMnNiN18-9 MT-308 L 1.10
1.6967 X3CrNiMoN18-14 MT-308 L 1.10

The information on our products contained in the table

are based on careful examination.
We assume no liability for the correctness.
We ask the user to check our data and the products for their own use.

1.02 1.02
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-410
Filler metals for welding stainless steels 1.4009
Filler metals for welding
Ferriticheat resistant,
chrome non-scaling
steel wire for and
MIG/TIG welding highly chrome
of stainless
corrosion-proof steelssteels.
StandardFiller metals for joint weldingMaterial
designation austenitic/ferritic
No. steels 1.4009
AWS/ASME SFA-5.9 ~ ER 410
EN ISO 14343-A G/W 13

2. base
Main Filler metals
metals for aluminium welding
Ferritic chrome steel, e.g.
Filler metals for titanium
1.4000
1.4001
welding
X 6 Cr 13
X 7 Cr 14
1.4008
1.4021
G-X 8 Cr 13
X 20 Cr 13
1.4002 X 6 CrAl 13 1.4006 X 12 Cr 13

Mechanical properties Gas shield I1

3. - weld
of all Filler metals for welding
- metal Thermalmild steels
treatment and low-alloyed steels,untreated
special electrode for chamfering
(typical values) Test temperature [°C] +20°C
0,2%-yield strength R p0,2 MPa 250
Tensile strength Rm MPa 450
Elongation A5 [%] 15

4. Filler metals for welding nickel,

Average chemical C
nickel alloys
Si
and castMniron Cr
composition 0,07 0,60 0,50 14,5
of all weld – metal (%)

Structure Martensite
5. Filler metals for hard surfacing and repair welding on cold and
Gas types applicable TIG I1
hot work as well as high
Gas types applicable MIG M 11, speed steels.
M 21, M 23 Cobalt base alloys
and M 32

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm] [kg]
6. Filler metals for welding copper
1,60 and copper alloys
1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

7. Flux-cored
Current/Polarity TIG wires =-
Current/Polarity MIG =+

8. Approvals

1.03
1.03
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding 410 NiMo steels 1.4351
Filler metals for welding
Ferriticheat resistant,
chrome nickel steelnon-scaling
wire for MIG/TIGand highly
welding of stainless
corrosion-proof steelschrome nickel steels.
StandardFiller metals for joint weldingMaterial
designation austenitic/ferritic
No. steels 1.4351
AWS/ASME SFA-5.9 ~ER 410 NiMo
EN ISO 14343-A G/W 13 4

2. base
Main Filler metals
metals for aluminium welding
Ferritic chrome nickel steels, e.g.
Filler metals for titanium
1.4313
1.4407
welding
X3CrNiMo13-4
GX5CrNiMo13-4
1.4414 GX4CrNiMo13-4

Mechanical properties Gas shield I1

3. - weld
of all Filler metals for welding
- metal Thermalmild steels
treatment and low-alloyed steels,untreated
special electrode for chamfering
(typical values) Test temperature [°C] +20°C
0,2%-yield strength R p0,2 MPa 600
Tensile strength Rm MPa 750
Elongation A5 [%] 15

4. Filler metals for weldingC nickel, nickel

Average chemical Si
alloys
Mn
and cast
Cr
iron Ni Mo
composition 0,03 0,80 0,70 13 4,5 0,5
of all weld – metal (%)

Structure Martensite
5. Filler metals for hard surfacing and repair welding on cold and
Gas types applicable TIG I1
hot work as well as high
Gas types applicable MIG M 13 speed steels. Cobalt base alloys

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm] [kg]
6. Filler metals for welding copper
1,60 and copper alloys
1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

7. Flux-cored
Current/Polarity TIG wires =-
Current/Polarity MIG =+

8. Approvals

1.04
1.04
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-410
Filler metals for welding stainlessHL steels 1.4009
Filler metals for welding
Rutile heat
coatedresistant, non-scaling
high deposition and highly
electrode for welding steels of same or
corrosion-proof steelssimilar type containing 13 % chrome.
StandardFiller metals for joint weldingMaterial
designation austenitic/ferritic
No. steels 1.4009
EN ISO 3581-A E 13 R 52
AWS/ASME SFA-5.4 E 410-17

2. Filler
Mechanical metals for aluminium
properties welding
Thermal treatment untreated
Filler
of all - weld metals for titanium
- metal welding
Test temperature [°C] +20°C
(typical values) 0,2%-yield strength Rp0,2 MPa 420
Tensile strength Rm MPa 680
Elongation A5 [%] 18
Impact stength Av [J] 50
3. Filler metals for welding mild steels and low-alloyed steels,
Averagespecial
chemicalelectrode
for chamfering
C Si Mn Cr
composition 0,05 0,7 0,6 13,5
of all weld – metal (%)

4. Filler
Structure metals for welding nickel, nickel alloys and cast iron
Martensite

Redrying 1h at +350°C.

Diameters Diameter Length Current Average Prices per kg per box

[mm] [mm] [A] weight box
[kg/1000pcs]
5. Filler
Welding currentmetals for hard surfacing
2,50 and
350 repair
70-90welding28,1
on cold 178
and 5,0
hot work as well as high3,25
Unit weights speed steels.
350 Cobalt
80-130 base alloys
47,5 105 5,0
4,00 450 110-160 92,5 65 6,0
5,00 450 160-220 144,7 41 6,0

6. Filler
Welding metals
positions acc. tofor welding
EN ISO 6947 copperPA,
andPB,copper alloys
PC, PD, PE, PF

Current/Polarity = +/ ~

7. Flux-cored wires

8. Approvals

1.05
1.05
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-430
Filler metals for welding stainless steels 1.4015
Filler metals for welding
Ferriticheat resistant,
chrome non-scaling
steel MIG/TIG and
wire for welding highly
stainless chrome steels.
corrosion-proof steels
Standard designation Material No. 1.4015
Filler metals for joint welding austenitic/ferritic steels ~ER 430
AWS/ASME SFA-5.9
EN ISO 14343-A G 17/W17

Main base metals Ferritic chrome steels, e.g.

2. Filler metals for aluminium
1.4057 welding
X 20 CrNi 17 2 1.4059 G-X CrNi 17
Filler metals for titanium
1.4740 welding
G-X 40 CrSi 17 1.4742 X 10 CrAl 18

Mechanical properties Gas shield M 11

of all - weld - metal Thermal treatment untreated
Test temperature [°C] + 800°C
3. values)
(typical Filler metals for welding mild
0,2%-yield steels and
strength R p0,2 low-alloyed
MPa steels, 300
special electrode for chamfering
Tensile strength Rm MPa 450
Elongation A5 [%] 15

Average chemical C Si Mn Cr
0,07 0,8
composition
4. Filler metals for welding nickel, nickel alloys and cast0,7iron 17,5
of all weld – metal (%)

Structure Ferrit martensite

Gas types applicable TIG I1

Gas5.types
Filler metals
applicable MIGfor
hardM surfacing
11, M 23, M 21and
and Mrepair
32 welding on cold and
hot work
TIG rod diameters,
as well as high speed steels.
Diameter Cobalt base alloys
Length Kg per box
unit weights [mm] [mm] [kg]
1,60 1000 10,0
2,00 1000 10,0
6. Filler metals for welding copper and copper alloys
2,40
3,20
1000
1000
10,0
10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Current/Polarity TIG =-
Current/Polarity MIG
7. Flux-cored wires =+

8. Approvals

1.06
1.06
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-stainless
Filler metals for welding 4115steels 1.4115
Filler metals for welding
Ferriticheat resistant,
chrome non-scaling
steel MIG wire and highly
for welding stainless chrome steels.
corrosion-proof steels
Standard designation Material No. 1.4115
Filler metals for joint welding austenitic/ferritic steels
EN ISO 14700 S Fe 7

Maine base metals Ferritic chrome steel, e.g.

1.4122 G – X35 Cr Mo 17
2. Filler metals for aluminium welding
MechanicalFiller metals
for titanium
properties welding
Gas shield
Thermal treatment
M 12
untreated
of all - weld - metal
(typical values) Test temperature [°C] +760°C
0,2%-yield strength R p0,2 MPa 500
Tensile strength Rm MPa 700
3. Filler metals for welding mild
Elongation steels and
A5 low-alloyed
[%] steels, 15
special electrode for chamfering
Hardness HB 400

Average chemical C Si Mn Cr Mo
composition 0,2 0,6 0,4 17 1,1
4. weld
of all Filler metals
– metal (%) for welding nickel, nickel alloys and cast iron
Structure Martensite/ferrite

Gas types applicable TIG I1

Gas types applicable MIG M 12, M 13
5. Filler metals for hard surfacing and repair welding on cold and
hot work
TIG rod diameters,as well as high speed steels. Cobalt base
Diameter
[mm]
alloys
Length
[mm]
Kg per box
[kg]
unit weights
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
6. Filler metals for welding copper and copper alloys
3,20 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Current/Polarity TIG =-
Current/Polarity MIG =+
7. Flux-cored wires

8. Approvals

1.07
1.07
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-430
Filler metals for welding stainlessTi steels 1.4502
Filler metals for welding
Ferriticheat resistant,
chrome non-scaling
steel MIG/TIG and
wire for welding highly
stainless chrome
corrosion-proof steelssteels, non – scaling up to +900°C.
StandardFiller metals for joint weldingMaterial
designation austenitic/ferritic
No. steels 1.4502
AWS/ASME SFA-5.9 ~ ER 439
EN ISO 14700 S Fe 7

2. base
Main Filler metals
metals for aluminium welding
Ferritic chrome steel, e.g.
Filler metals for titanium
1.4000
1.4002
welding
X 6 Cr 13
X 6 CrAl 13
1.4510
1.4511
X 8 CrTi 17
X 8 CrNb 17
1.4016 X 8 Cr 17 1.4523 X 8 CrMoTi 17
1.4113 X 6 Cr Mo 17 1.4057 X 17 CrNi16-2

3. Filler
Mechanical metals for welding
properties mild steels
Gas shield and low-alloyed steels, I1
special
of all - weld electrode for chamfering
- metal Thermal treatment
Test temperature
untreated
+20°C
(typical values) [°C]
0,2%-yield strength Rp0,2 MPa 360
Tensile strength Rm MPa 620
Elongation A5 [%] 10
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn Cr Ti
composition 0,08 1,0 0,6 17,5 0,5
of all weld – metal (%)

5. Filler
Structure metals for hardDeltaferrite
surfacing and repair welding on cold and
hot work as well
Gas types applicable TIG
as high
I1 speed steels. Cobalt base alloys
Gas types applicable MIG M 12, M 13

TIG rod diameters, Diameter Length Kg per box

unit6.weights
Filler metals for welding copper
[mm] and copper alloys
[mm] [kg]
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0

7.welding
MIG Flux-cored
wire wires Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Current/Polarity TIG =-
Current/Polarity MIG =+

8. Approvals

1.08
1.08
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-stainless
Filler metals for welding 308 Hsteels
Filler metals for welding
MIG/TIGheat resistant,
wire with non-scaling
high carbon and highly
content, for welding high temperature
corrosion-proof steels
resistant steels.
High temperature resistant up to +700°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14343-A G 19 9 H/W 19 9 H
AWS/ASME SFA-5.9 ~ER 308 H

2. base
Main Filler metals
metals for aluminium welding
Stainless steel austenitic Cr-Ni steel / cast steel, e.g.
1.4948 X 6 Cr Ni 18 11
Filler metals for titanium
1.4878
welding
X 12 CrNiTi 18 9
1.4550 X 6 CrNiNb 18 10

Mechanical properties Welding process TIG MIG

3. – weld
of all Filler metals for welding Gas
– metal mild steels
shield and low-alloyed I1steels, M 11
Thermal treatment [°C] untreated untreated
special electrode for chamfering
(typical values)
Test temperature +20°C -196°C +20°C -196°C
0,2%-yield strength Rp0,2 MPa 320 320
1,0%-yield strength Rp1,0 MPa 350 350
Tensile strength Rm MPa 500 500
4. Filler metals for welding nickel, nickel
Elongation A5 alloys
[%] and35
cast iron 35
Impact strength AV [J] 70 70

Average chemical C Si Mn Cr Ni
composition 0,04-0,08 0,65 1,0-2,5 19,5-22,0 9,0-11,0
of all weld – metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
hot
Structure work as well as Austenite
high speed steels.
with 5% ferriteCobalt base alloys

Gas types applicable TIG I1

Gas types applicable MIG M 11, M 23
6. Filler metals for weldingDiameter
copper and copper Length
alloys
TIG rod diameters, Kg per box
unit weights [mm] [mm] [kg]
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0
7. Flux-cored wires
MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF, PE

8. Approvals
Current/Polarity TIG =-
Current/Polarity MIG =+

1.09

1.09
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-308
Filler metals for welding stainless L steels 1.4316
Filler metals for welding
Chromeheat
nickel resistant,
steel MIG/TIGnon-scaling and
wire with very low highly
carbon content, for
corrosion-proof steels
welding stainless and cold-tough austenitic steels exposed to
temperatures of up to +400°C. Cold-tough down to –196°C.
StandardFiller metals for joint welding
designation austenitic/ferritic
Material No. steels 1.4316
AWS/ASME SFA-5.9 ER 308 L Si
EN ISO 14343-A G 19 9 LSi/W 19 9 LSi
Main base metals Stainless austenitic chrome nickel steel/cast steel, e.g.
2. Filler metals for aluminium
1.4306 welding
X 2 Cr Ni 19 11 1.4301 X 5 CrNi 18 10
1.4306 X 7 Cr 14 1.4303 X 5 CrNi 18 12
Filler metals for titanium
1.4311
welding
X 7 CrAl 13 1.4308 G-X 6 CrNi 18 9
1.4552 G-X 5 CrNiNb 18 9 1.4310 X 12 CrNi 17 7
1.4541 X 6 CrNiTi 18 10 1.4319 X 5 CrNi 18 7
1.4550 X 6 CrNiNb 18 10
3. Filler
Mechanical metals for welding
properties mildprocess
Welding steels and low-alloyedTIG steels, MIG
special
of all – weld electrode for chamfering
– metal Gas shield
Thermal treatment
I1
untreated
M 11
untreated
(typical values)
Test temperature [°C] +20°C -196°C +20°C -196°C
0,2%-yield strength Rp0,2 MPa ≥270 ≥270
Tensile strength Rm MPa ≥510 ≥510
4. Filler metals for welding nickel, nickel
Elongation A5 alloys
[%] and25 cast iron 35
Impact strength AV [J] LNB LNB LNB LNB

Average chemical C Si Mn Cr Ni
composition 0,03 0,65-1,20 1,0-2,50 19,0-21,0 9,0-11,0
of all - weld - metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
hot
Structure work as well as Austenite
high speed steels.
with delta ferrite Cobalt base alloys

Gas types applicable TIG I1

Gas types applicable MIG M 11, M 12
6. Filler metals for welding copper and copper alloys
TÜV, DB, CE
Approvals
TIG rod diameters, Diameter Length Kg per box
unit weights [mm] [mm] [kg]
1,00 1000 10,0
1,20 1000 10,0
7. Flux-cored wires 1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
5,00 1000 10,0
8. Approvals Diameter 0,8mm 1,0mm 1,2mm 1,6mm
MIG welding wire

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF, PE

Current/Polarity TIG =-
Current/Polarity MIG =+

1.10
1.10
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-308
Filler metals for welding stainlessL steels 1.4316
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding and highly
stainless austenitic steels.
corrosion-proof steels
Weld metal of austenitic chrome nickel steel, very low carbon content,
suitable for working temperatures of up to +350°C.
Filler metals for joint
Coldwelding austenitic/ferritic
– tough down to – 60°C. steels
Standard designation EN ISO 3581-A E 19 9 LR 12
Material No. 1.4316
2. Filler metals for aluminium welding
AWS/ASME SFA-5.4 E 308 L – 16
Main base metals Stainless austenitic chrome nickel steel/cast steel, e.g.
Filler metals for titanium
1.4306
welding
X 2 Cr Ni 19 11 1.4301 X 5 CrNi 18 10
1.4306 X 7 Cr 14 1.4303 X 5 CrNi 18 12
1.4311 X 7 CrAl 13 1.4308 G-X 6 CrNi 18 9
1.4552 G-X 5 CrNiNb 18 9 1.4310 X 12 CrNi 17 7
3. Filler metals for welding
1.4541 mildX steels
6 CrNiTi and
18 10 low-alloyed
1.4319 steels, X 5 CrNi 18 7
1.4550 X 6 CrNiNb 18 10
special electrode for chamfering
Mechanical properties Thermal treatment untreated untreated
of all - weld – metal Test temperature [°C] + 20°C - 60°C
(typical values) 0,2%-yield strength Rp0,2 MPa ≥320
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and≥510
cast iron
Elongation A5 [%] ≥30
Impact strength AV [J] LNB -

Average chemical C Si Mn Cr Ni
5. Filler metals
composition for hard surfacing
0,04
and
1,2
repair 2,0
welding on cold and
18,0-21,0 9,0-11,0
of all - weld - metal (%)
hot work as well as high speed steels. Cobalt base alloys
Structure Austenite with delta ferrite

Redrying 2h at +350°C.
6. Filler metals for welding copper and copper alloys
Approvals TÜV, DB, CE

Diameters, Diameter Lenght Current Average weight Pieces Kg per

[mm] [mm] [A] [kg/1000 pcs.] Per box box
welding current
unit weights 1,50 250 30-40 5,4 463 2,5
2,00 300 40-60 11,6 345 4,0
7. Flux-cored wires
2,50 300 60-90 18,2 220 4,0
3,25 350 80-110 35,7 140 5,0
4,00 350 100-150 53,8 93 5,0
5,00 450 150-190 108,0 56 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

8. Approvals
Current/Polarity = +/ ~

1.11
1.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-308
Filler metals for welding stainlessHL steels 1.4316
Filler metals for welding heathigh
Rutile coated resistant, non-scaling
deposition electrode givingand
150%highly
recovery, designed
corrosion-proof steels
for welding stainless austenitic steels.
Weld metal of austenitic chrome nickel steel, very low carbon content,
Filler metals for joint welding
suitable austenitic/ferritic
for working steels
temperatures of up to +350°C.

Standard designation Material No. ~1.4316

AWS/ASME SFA-5.4 ~ E 308 L-17
2. Filler metals for aluminiumEN
welding
ISO 3581-A E 19 9 LR 53

Filler metals for titanium

Main base metals
welding
Stainless austenitic chrome nickel steel/cast steel, e.g.
1.4306 X 2 CrNi 19 11 1.4301 X 5 CrNi 18 10
1.4306 G-X 2 CrNi 18 9 1.4303 X 5 CrNi 18 12
1.4311 X 2 CrNiN 18 10 1.4308 G-X 6 CrNi 18 9
3. Filler metals for welding
1.4552 mildG-X
steels and
5 CrNiNb 18 low-alloyed
9 1.4310 steels,
X 12 CrNi 17 7
special electrode for1.4541 X 6 CrNiTi 18 10
chamfering
1.4550 X 6 CrNiNb 18 10
1.4319 X 5 CrNi 18 7

Mechanical properties Thermal treatment untreated untreated

of all – weld – metal Test temperature [°C] +20°C -60°C
4. values)
(typical Filler metals for welding nickel,
0,2%-yield strengthnickel
Rp0,2 alloys
MPa and cast
320iron
Tensile strength Rm MPa 540
Elongation A5 [%] 35
Impact strength AV [J] 70 32

Average chemical C Si Mn Cr Ni
5. Filler metals for hard surfacing
0,04
and1,0
repair welding
0,5-2,50
on cold and
18,0-21,0 9,0-12,0
composition
hot work as
of all - weld – metal (%) well as high speed steels. Cobalt base alloys
Structure Austenite with delta ferrite

6. Filler
Redrying metals for welding copper and copper alloys
1h at +350°C.

Diameters, Diameter Lenght Current Average weight Pieces Kg per

[mm] [mm] [A] [kg/1000 pcs.] Per box box
welding current
unit weights 2,00 300 40-75 16,8 238 4,0
2,50 350 50-100 30,7 163 5,0
7. Flux-cored wires 3,25 350 80-130 51,9 96 5,0
4,00 450 110-180 101,0 59 6,0

Welding positions acc.to EN ISO 6947 PA, PB

Current/Polarity = +/ ~
8. Approvals

1.12
1.12
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-347
Filler metals for welding stainless steels 1.4551
Filler metals for welding
TIG/MIGheat
weldingresistant, non-scaling
wire of stabilized austenitic and highly
chrome – nickel steel for
corrosion-proof steels
welding stainless austenitic steels that are exposed to working
temperatures up to +400°C; non – scaling up to +800°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4551
AWS/ASME SFA-5.9 ~ER 347 Si
EN ISO 14343-A G/W 19 9 NbSi
2. Filler metals for aluminium welding
Main base metals Stainless austenitic chrome nickel steel/cast steel, e.g.
Filler metals for titanium
1.4541
welding
X 6 CrNiTi 18 10 1.4301 X 5 CrNi 18 10
1.4550 X 6 CrNiNb 18 10 1.4303 X 5 CrNi 18 12
1.4552 G-X 5 CrNiNb 18 9 1.4308 G-X 6 CrNi 18 9
1.4319 X 5 CrNi 18 7 1.4310 X 12 CrNi 17 7
3. Filler metals for welding
1.4306 mildX steels
2 CrNi 19and
11 low-alloyed
1.4312 steels,
G-X 10 CrNi 18 8
1.4306 G-X 2 CrNi 18 9
special electrode for chamfering
Mechanical properties Welding process TIG MIG
of all – weld – metal Gas shield I1 M 11
(typical values) Thermal treatment untreated untreated
4. Filler metals for welding nickel, nickel
Test temperature alloys
[°C] and cast
+20°Ciron +20°C -196°C
0,2%-yield strength Rp0,2 MPa ≥270 ≥270
Tensile strength Rm MPa ≥550 ≥550
Elongation A5 [%] ≥25 ≥25
Impact strength AV [J] - -
5. Filler metals for hard surfacing
C Si
and repair
Mn
welding
Cr
onNicold and(Nb+Ta)
Average chemical
hot work as
composition well as high
0,08 speed steels. Cobalt
0,65-1,2 1,0-2,50 base
19,0-21,0alloys
9,0-11,0 10x%C.max1,0
of all - weld - metal (%)

Structure Austenite with delta ferrite

6. Filler metals for welding
Gas types applicable TIG I1 copper and copper alloys
Gas types applicable MIG M 11, M 12

Approvals TÜV, CE

TIG rod diameters, Diameter Length Kg per box

unit7.weights
Flux-cored wires [mm] [mm] [kg]
1,00 1000 10,0
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
8. Approvals 5,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity TIG =-
Current/Polarity MIG =+

1.13
1.13
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-347
Filler metals for welding stainless steels 1.4551
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding stainless and highly
austenitic steels.
corrosion-proof steels
Weld metal of stabilized austenitic chrome nickel steel, suitable for
working temperatures up to +400°C; non – scaling up to +800°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4551
AWS/ASME SFA-5.4 E 347 -16
EN ISO 3581-A E 19 9 Nb R 12
2. Filler metals for aluminium welding
Main base metals Stainless austenitic chrome nickel steel/cast steel, e.g.
Filler metals for titanium
1.4306
welding
X 2 CrNi 19 11 1.4301 X 5 CrNi 18 10
1.4306 G-X 2 CrNi 18 9 1.4303 X 5 CrNi 18 12
1.4312 G-X 10 CrNi 18 8 1.4308 G-X 6 CrNi 17 7
1.4541 X 6 CrNiTi 18 10 1.4310 X 12 CrNi 17 7
3. Filler metals for welding
1.4550 mildX steels
6 CrNiNband
18 10low-alloyed
1.4319 steels,
X 5 CrNi 18 7
1.4552 G-X 5 CrNiNb 18 9
special electrode for chamfering
Mechanical properties Thermal treatment untreated untreated
of all weld metal Test temperature [°C] +20° -120°C
(typical values) 0,2%-yield strength Rp0,2 MPa ≥350
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and cast
≥550iron
Elongation A5 [%] ≥25
Impact strength AV [J] LNB LNB

Average chemical C Si Mn Cr Ni (Nb+Ta)

5. Filler metals
composition for hard0,08
surfacing
1,2
and repair
2,0
welding on cold
18,0-21,0
and
9,0-11,0 8 x C max 1,1
of all - weld - metal (%)
hot work as well as high speed steels. Cobalt base alloys
Structure Austenite with delta ferrite

Redrying 2h at +300°C.
6. Filler metals for welding copper and copper alloys
Approvals TÜV, DB, CE

Diameters, Diameter Length Current Average Pieces per Kg per

[mm] [mm] [A] weight box box
welding current,
[kg/1000 pcs.]
unit weights 1,50 250 30-40 5,4 463 2,5
7. Flux-cored wires 2,00 300 40-60 11,6 345 4,0
2,50 300 60-90 18,2 220 4,0
3,25 350 80-110 35,7 140 5,0
4,00 350 100-150 53,8 93 5,0
5,00 450 150-190 108,0 56 6,0

8. Approvals
Welding positions acc.to DIN EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity = +/ ~

1.14
1.14
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-316
Filler metals for welding stainlessL steels 1.4430
Filler metals for welding
MIG/TIGheat resistant,
welding non-scaling
wire of austenitic andmolybdenum
chrome nickel highly – steel,
corrosion-proof steels
very low carbon content, for welding stainless and cold – tough austenitic
steels exposed to working temperatures up to +400°C; cold – tough down
Filler metals for joint
to –welding
196°C. austenitic/ferritic steels
Standard designation Material No. 1.4430
AWS/ASME SFA-5.9 ~ER 316 L Si
2. Filler metals for aluminiumENwelding
ISO 14343-A G/W 19 12 3 LSi

Filler metals for titanium

Main base metals
welding
Stainless austenitic chrome nickel molybdenum – steel/cast steel, e.g.
1.4404 X 2 CrNiMo 17 13 2 1.4571 X 6 CrNiMoTi 17 12 2
1.4404 G-X 2 CrNiMo 18 10 1.4573 X 10 CrNiMoTi 18 12
1.4406 X 2 CrNiMoN 17 12 2 1.4580 X 6 CrNiMoNb 17 12 2
3. Filler metals for welding
1.4429 mildX steels
2 CrNiMoand
17 13low-alloyed
3 1.4581 steels,
G-X 5 CrNiMoNb 18 10
special electrode for1.4435 X 2 CrNiMo 18 14 3
chamfering
1.4408 G-X 6 CrNiMo 18 10
1.4583
1.4436
X 10 CrNiMoNb 18 12
X 5 CrNiMo 17 13 3
1.4401 X 5 CrNiMo 17 12 2 1.4420 X 5 CrNiMo 18 11

Mechanical properties Welding process TIG MIG

4. – weld
of all Filler metals
– metal for welding nickel, nickel alloys and castI 1iron
Gas shield M 11
(typical values) Thermal treatment untreated untreated
Test temperature [°C] +20°C -196°C +20°C -196°C
0,2%-yield strength Rp0,2 MPa ≥295 ≥295
Tensile strength Rm MPa ≥510 ≥510
Elongation A5 [%] ≥25 ≥25
5. Filler metals for hard surfacing
Impact strength and
AV repair[J]welding
LNB on coldLNB andLNB LNB
hot work as well as high speed steels. Cobalt base alloys
Average chemical C Si Mn Cr Mo Ni
composition 0,03 0,65-1,2 1,0-2,50 18,0-20,0 2,5-3,0 11,0-14,0
of all - weld - metal (%)
6.
Structure
Filler metals for welding
Austenitecopper and copper alloys
with deltaferrite

Gas types applicable TIG I1

Gas types applicable MIG M 11, M 12

Approvals TÜV, DB, CE

7. Flux-cored wires
TIG rod diameters, Diameter Length Kg per box
unit weights [mm] [mm]
1,00 1000 10,0
1,20 1000 10,0
1,60 1000 10,0
2,00 1000 10,0
8. Approvals 2,40
3,20
1000
1000
10,0
10,0
4,00 1000 10,0
5,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF, PE

Current/Polarity TIG =-
Current/Polarity MIG =+

1.15
1.15
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-316
Filler metals for welding stainless L steels 1.4430
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding austeniticand
chromehighly
nickel molybdenum
corrosion-proof steels
– steel, very low carbon content, for welding stainless and cold – tough
austenitic steels exposed to working temperatures up to +400°C; cold –
Filler metals for joint welding
tough down to austenitic/ferritic
– 60°C. steels
Standard designation Material No. 1.4430
AWS/ASME SFA-5.4 E 316 L - 16
2. Filler metals for aluminiumEN
welding
ISO 3581-A E 19 12 3 LR 12

Filler metals for titanium

Main base metals
welding
Stainless austenitic chrome nickel molybdenum – steel/cast steel, e.g.
1.4404 X 2 CrNiMo 17 13 2 1.4571 X 6 CrNiMoTi 17 12 2
1.4404 G-X 2 CrNiMo 18 10 1.4573 X 10 CrNiMoTi 18 12
1.4406 X 2 CrNiMoN 17 12 2 1.4580 X 6 CrNiMoNb 17 12 2
3. Filler metals for welding
1.4429 mildX steels
2 CrNiMoand
17 13low-alloyed
3 1.4581 steels,
G-X 5 CrNiMoNb 18 10
special electrode for1.4435 X 2 CrNiMo 18 14 3
chamfering
1.4401 X 5 CrNiMo 17 12 2
1.4583
1.4420
X 10 CrNiMoNb 18 12
X 5 CrNiMo 18 11
1.4408 G-X 6 CrNiMo 18 10 1.4436 X 5 CrNiMo 17 13 3

Mechanical properties Thermal treatment untreated untreated

4. – weld
of all Filler metals
– metal for welding nickel, nickel alloys
Test temperature [°C] and cast
+20°iron -60°C
(typical values) 0,2%-yield strength Rp0,2 MPa ≥320
Tensile strength Rm MPa ≥510
Elongation A5 [%] ≥25
Impact strength AV [J] LNB LNB

5. Filler metals for hard surfacing

Average chemical C
and
Si
repair
Mn
weldingCron cold Mo
and Ni
hot
composition work as well as high speed
0,04 steels.
1,2 Cobalt
2,0 base alloys
17,0-20,0 2,5-3,0 10,0-13,0
of all - weld – metal (%)

Structure Austenite with deltaferrite

6. Filler metals for welding copper and copper alloys
Redrying 2h at +350°C.

Approvals TÜV, DB, CE

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
7. Flux-cored wires kg/1000 pcs.
unit weights 1,50 250 30 - 40 5,4 463 2,5
2,00 300 40 - 60 11,7 342 4,0
2,50 300 60 - 90 18,5 216 4,0
3,25 350 80 - 110 36,0 139 5,0
4,00 350 100 - 150 55,0 90 5,0
8. Approvals 5,00 450 150 - 190 111,0 54 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity = +/ ~

1.16
1.16
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-316
Filler metals for welding stainlessLV steels 1.4430
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for vertical andofhighly
down welding stainless austenitic
corrosion-proof steels
steels. Weld metal of austenitic chrome nickel molybdenum – steel, very
low carbon content, suitable for working temperatures up to +400°C,
Filler metals for joint
coldwelding austenitic/ferritic
– tough down to – 120°C. steels
Standard designation Material No. ~1.4430
AWS/ASME SFA-5.4 ~ E 316 L - 17
2. Filler metals for aluminiumEN
welding
ISO 3581-A E 19 12 3 LR 11

Filler metals for titanium

Main base metal
welding
Stainless austenitic chrome nickel molybdenum – steel/cast steel e.g.
1.4404 X 2 CrNiMo 17 13 2 1.4571 X 6 CrNiMoTi 17 12 2
1.4404 G-X 2 CrNiMo 18 10 1.4573 X 10 CrNiMoTi 18 12
1.4406 X 2 CrNiMoN 17 12 2 1.4580 X 6 CrNiMoNb 17 12 2
3. Filler metals for welding
1.4429 mildX steels and
2 CrNiMoN low-alloyed
17 13 3 1.4581 steels,
G-X 5 CrNiMoNb 18 10
special electrode for1.4435 X 2 CrNiMo 18 14 3
chamfering
1.4408 G-X 6 CrNiMo 18 10
1.4583
1.4436
X 10 CrNiMoNb 18 12
X 5 CrNiMo 17 13 3
1.4401 X 5 CrNiMo 17 12 2 1.4420 X 5 CrNiMo 18 11

Mechanical properties Thermal treatment untreated

4. – weld
of all Filler metals
– metal for welding nickel, nickel alloys
Test temperature [°C] and cast iron+20°
(typical values) 0,2%-yield strength Rp0,2 MPa 360
Tensile strength Rm MPa 550
Elongation A5 [%] 38
Impact strength AV [J] 75

5. Filler metals for hard surfacing

Average chemical C
and
Si
repair
Mn
weldingCron cold Mo
and Ni
hot work as well
composition as high
0,02speed steels.
0,9 Cobalt
1,0 base alloys
18,0 2,7 11,5
of all - weld – metal (%)

Structure Austenite with deltaferrite

6. Filler metals for welding copper and copper alloys
Redrying 2h at +350°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,50 300 50 - 70 16,2 247 4,0
7. Flux-cored wires 3,25 350 80 - 110 32,0 156 5,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PD, PE, PF, PG

Current/Polarity = +/ ~
8. Approvals

1.17
1.17
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-316
Filler metals for welding stainless HL steels ~1.4430
Filler metals for welding heathigh
Rutile coated resistant, non-scaling
deposition electrode givingand highly
160 % recovery, designed
corrosion-proof steels
for welding stainless austenitic steels. Weld metal of austenitic chrome
nickel molybdenum – steel, very low carbon content, suitable for working
Filler metals for joint weldingupaustenitic/ferritic
temperatures to +400°C. steels
Standard designation Material No. ~1.4430
AWS/ASME SFA-5.4 ~ E 316 L - 17
2. Filler metals for aluminiumEN
welding
ISO 3581-A E 19 12 3 LR 53

Filler metals for titanium

Main base metals
welding
Stainless austenitic chrome nickel molybdenum – steel/cast steel e.g.
1.4404 X 2 CrNiMo 17 13 2 1.4571 X 6 CrNiMoTi 17 12 2
1.4404 G-X 2 CrNiMo 18 10 1.4573 X 10 CrNiMoTi 18 12
1.4406 X 2 CrNiMoN 17 12 2 1.4580 X 6 CrNiMoNb 17 12 2
3. Filler metals for welding
1.4429 mildX steels and
2 CrNiMoN low-alloyed
17 13 3 1.4581 steels,
G-X 5 CrNiMoNb 18 10
special electrode for1.4435 X 2 CrNiMo 18 14 3
chamfering
1.4408 G-X 6 CrNiMo 18 10
1.4583
1.4436
X 10 CrNiMoNb 18 12
X 5 CrNiMo 17 13 3
1.4401 X 5 CrNiMo 17 12 2 1.4420 X 5 CrNiMo 18 11

Mechanical properties Thermal treatment untreated

4. – weld
of all Filler metals
– metal for welding nickel, nickel alloys
Test temperature [°C] and cast iron+20°
(typical values) 0,2%-yield strength Rp0,2 MPa 350
1,0%-yield strength Rp1,0 MPa 370
Tensile strength Rm MPa 550
Elongation A5 [%] 35
Impact strength AV [J] 70
5. Filler metals for hard surfacing and repair welding on cold and
Averagehot work as well
chemical as highC speed steels.
Si Cobalt
Mn base alloys
Cr Mo Ni
composition <0,03 0,9 0,9 18,3 2,7 12,0
of all - weld – metal (%)

6. Filler
Structure metals for welding
Austenitecopper and copper alloys
with deltaferrite

Redrying 2h at +350°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit7.weights
Flux-cored wires 2,00 300 50 - 70 16,8 238 4,0
2,50 350 70 - 90 30,7 163 5,0
3,25 350 80 - 110 51,9 96 5,0
4,00 450 135 - 175 101,0 59 6,0

Welding positions acc.to EN ISO 6947 PA, PB

8. Approvals
Current/Polarity = +/ ~

1.18
1.18
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-318
Filler metals for welding stainless steels 1.4576
Filler metals for welding
MIG/TIGheat resistant,
welding non-scaling
wire of stabilized austenitic and highly
chrome nickel molybdenum
corrosion-proof steels
– steel, for welding stainless austenitic steels suitable for working
temperatures up to +400°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4576
AWS/ASME SFA-5.9 ~ER 318
EN ISO 14343-A G/W 19 12 3 NbSi
2. base
Main Filler metals for aluminium
metals welding
Stainless austenitic chrome nickel molybdenum – steel/cast steel e.g.
1.4571 X 6 CrNiMoTi 17 12 2 1.4404 X 2 CrNiMo 17 13 2
Filler metals for titanium
1.4573
welding
X 10 CrNiMoTi 18 12 1.4404 G-X 2 CrNiMo 18 10
1.4580 X 6 CrNiMoNb 17 12 2 1.4435 X 2 CrNiMo 18 14 3
1.4581 G-X 5 CrNiMoNb 18 10 1.4401 X 5 CrNiMo 17 12 2
1.4583 X 10 CrNiMoNb 18 12 1.4408 G-X 6 CrNiMo 18 10
3. Filler metals for welding mild steels and low-alloyed steels,
1.4420 X 5 CrNiMo 18 11 1.4436 X 5 CrNiMo 17 13 3
Mechanical properties Welding process TIG MIG
special
of all – weld electrode forGas
– metal chamfering
shield I1 M 11
(typical values) Thermal treatment untreated untreated
Test temperature [°C] +20°C +20°C -196°C
0,2%-yield strength Rp0,2 MPa ≥295 ≥295
4. Filler metals for welding nickel, nickel
Tensile strength Rm
alloys
MPa
and cast ≥550
iron ≥550
Elongation A5 [%] ≥25 ≥25
Impact strength AV [J] LNB LNB LNB

Average chemical C Si Mn Cr Mo Ni (Nb+Ta)

composition 0,08 0,65-1,2 1,0-2,5 18,0-20,0 2,5-3,0 11,0-14,0 10x % C max. 1,0
5. - weld
of all Filler metals
– metal for hard surfacing and repair welding on cold and
(%)
hot work as well as high speed steels. Cobalt base alloys
Structure Austenite with deltaferrite

Gas types applicable TIG I1

Gas types applicable MIG M 11, M 12 and M 21
6. Filler metals for welding copper and copper alloys
Approvals TÜV, DB, CE

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
1,00 1000 10,0
7. Flux-cored wires 1,20 1000 10,0
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
8. Approvals 5,00 1000 10,0

MIG welding wires Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PG

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF, PE

Current/Polarity TIG =-
Current/Polarity MIG =+

1.19
1.19
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-318
Filler metals for welding stainless steels 1.4576
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding and highly
stainless austenitic steels, weld metal
corrosion-proof steels
of stabilized chrome nickel molybdenum – steel, suitable for working
temperatures up to +400°C, cold – tough down to –60°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4576
AWS/ASME SFA-5.4 E 318 - 16
EN ISO 3581-A E 19 12 3 Nb R 12
2. Filler metals for aluminium welding
Main base metals Stainless austenitic chrome nickel molybdenum – steel/cast steel e.g.
Filler metals for titanium
1.4571
welding
X 6 CrNiMoTi 17 12 2 1.4404 X 2 CrNiMo 17 13 2
1.4573 X 10 CrNiMoTi 18 12 1.4404 G-X 2 CrNiMo 18 10
1.4580 X 6 CrNiMoNb 17 12 2 1.4436 X 5 CrNiMo 17 13 3
1.4581 G-X 5 CrNiMoNb 18 10 1.4401 X 5 CrNiMo 17 12 2
3. Filler metals for welding
1.4583 mildX steels and18low-alloyed
10 CrNiMoNb 12 1.4408 steels,
G-X 6 CrNiMo 18 10
1.4420 X 5 CrNiMo 18 11
special electrode for chamfering
Mechanical properties Thermal treatment untreated untreated
of all – weld – metal Test temperature [°C] +20° -60°C
(typical values) 0,2%-yield strength Rp0,2 MPa ≥350
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and cast
≥550iron
Elongation A5 [%] ≥25
Impact strength AV [J] LNB LNB

Average chemical C Si Mn Cr Mo Ni (Nb+Ta)

5. Filler metals
composition for hard
0,08surfacing
1,2 2,0 and repair2,5-3,0
17,0-20,0 welding on cold8and
10,0-13,0 x % C max 1,1
of all - weld – metal (%)
hot work as well as high speed steels. Cobalt base alloys
Structure Austenite with deltaferrite

Redrying 2h at +300°C.
6. Filler metals for welding copper and copper alloys
Approvals TÜV, DB, CE

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
Unit weights 1,50 250 30 - 40 5,4 463 2,5
7. Flux-cored wires 2,00 300 40 - 60 11,7 342 4,0
2,50 300 60 - 90 18,5 216 4,0
3,25 350 80 - 110 36,0 140 5,0
4,00 350 100 - 150 54,3 92 5,0
5,00 450 150 - 190 108,5 55 6,0

8. Approvals
Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity = +/ ~

1.20
1.20
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-4820
Filler metals for welding stainless steels 1.4820
Filler metals for welding heat
Ferritic – resistant,
austenitic non-scaling
chrome nickel and
steel MIG/TIG highly
wire for welding heat –
corrosion-proof steels
resistant steels. Weld metal non – scaling up to +1100°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14343-A steels G/W 25 4
Material No. 1.4820

Main base metals Heat – proof and non – scaling ferritic – austenitic steels e.g.
2. Filler metals for aluminium
1.4713 welding
X 10 CrAl 7 1.4821 X 20 CrNiSi 25 4
1.4724 X 10 CrAl 13 1.4822 G-X40 CrNi 24 5
Filler metals for titanium
1.4742
welding
X 10 CrAl 18 1.4823 G-X40 CrNiSi 27 4
1.4762 X 10 CrAl 24

Mechanical properties Gas shield M 11

3. – weld
of all Filler metals
– metal for welding
Thermalmild steels and low-alloyed steels,
treatment untreated
Test temperature [°C] +20°
special
(Typical values)
electrode for chamfering
0,2%-yield strength Rp0,2 MPa 450
Tensile strength Rm MPa 650
Elongation A5 [%] 15
Impact strength AV [J] 50
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn Cr Ni
composition 0,10 0,6 1,0-2,5 24,0-27,0 4,0-6,0
of all - weld – metal (%)

Structure Ferrite-austenite
5. Filler metals for hard surfacing and repair welding on cold and
hot
Gas types work as
applicable well as I1
TIG high speed steels. Cobalt base alloys
Gas types applicable MIG M 11

TIG rod diameters, Diameter Length Kg per box

unit6.weights
Filler metals for welding copper
[mm] and copper [mm]
alloys
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0

7.welding
MIG Flux-cored
wires wires Diameter 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF, PE

Current/Polarity TIG =-
8. Approvals
Current/Polarity MIG =+

1.21
1.21
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-4820
Filler metals for welding stainless steels 1.4820
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding andsteels.
heat resistant highly
corrosion-proof steels
Weld metal of ferritic – austenitic chrome nickel steel;
Non – scaling up to +1100°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 3581-A E 25 4 R 32
Material No. 1.4820

2. base
Main Filler metals
metals for aluminium
Heat – proof welding
and non – scaling ferritic – austenitic steels e.g.
1.4713 X 10 CrAl 7 1.4821 X 20 CrNiSi 25 4
Filler metals for titanium
1.4724
welding
X 10 CrAl 13 1.4822 G-X40 CrNi 24 5
1.4742 X 10 CrAl 18 1.4823 G-X40 CrNiSi 27 4
1.4762 X 10 CrAl 24

3. Filler
Mechanical metals for welding
properties Thermalmild steels and low-alloyed
treatment steels,
untreated untreated
of all – weld electrode forTest
– metal
special temperature
chamfering
0,2%-yield strength Rp0,2
[°C]
MPa
+20°
440
+600°C
150
(Typical values)
Tensile strength Rm MPa 640 230
Elongation A5 [%] 20 35
Impact strength AV [J] 30
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn Cr Ni
composition 0,06 0,7 2,5 24,0-27,0 4,0-6,0
of all - weld – metal (%)

5. Filler
Structure metals for hard surfacing and repair welding on cold and
Ferrite-austenite

hot
Redrying work as well as high speed steels. Cobalt base alloys
1h at +350°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
6. Filler metals for welding
Unit weights 2,50copper
300and copper
50 - 70 alloys
16,8 238 4,0
3,25 350 70 - 100 35,2 142 5,0
4,00 350 90 - 140 51,5 97 5,0

Welding positions acc.to DIN EN ISO 6947 PA, PB, PC, PE, PF

7. Flux-cored
Current/Polarity wires =+

8. Approvals

1.22
1.22
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-309
Filler metals for welding stainless steels 1.4829
Filler metals for welding
TIG/MIGheat resistant,
welding non-scaling
wire of austenitic andsteel
chrome nickel highly
for welding heat
corrosion-proof steels
resistant steels. Weld metal non – scaling up to +800°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 1.4829
AWS/ASME SFA-5.9 ER 309 Si
EN ISO14343-A G/W 22 12H

2. fields
Main Filler metals for
of applicationaluminium welding
Dissimilar steels
layer welding.
(joint welds of austenitic to ferritic steels) cladding and buffer

Filler metals for titanium welding

Main base metals Heat – proof and non – scaling steels e.g.
1.4710 G-X 30 CrSi 6 1.4825 G-X 25 CrNiSi 18 9
1.4729 G-X 40 CrSi 13 1.4828/1.2780 X 15 CrNiSi 20 12
1.4740 G-X 40 CrSi 17 1.4878 X 12 CrNiTi 18 9
3. Filler metals for welding mild steels and low-alloyed steels,
Mechanicalspecial electrode
properties for chamfering TIG MIG
of all – weld – metal Gas shield I1 M11
(typical values Thermal treatment [°C] untreated untreated
Test temperature +20° +20°C
0,2%-yield strength Rp0,2 MPa 400 380
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and cast
600iron 600
Elongation A5 [%] 35 35
Impact strength AV [J] 65 65

Average chemical C Si Mn Cr Ni
5. Filler metals
composition for hard 0,08 0,9
surfacing and repair1,0-2,50
welding on23,0-25,0
cold and 12,0-14,0
of all - weld – metal (%)
hot work as well as high speed steels. Cobalt base alloys
Structure Austenite with increased delta ferrite standard

Gas types applicable TIG I1

Gas6.types M 11 and M 23
Filler metals
applicable MIGfor welding copper and copper alloys
TIG rod diameters, Diameter Length Kg per box
unit weights [mm] [mm]
1,00 1000 10,0
1,60 1000 10,0
2,00 1000 10,0
7. Flux-cored wires 2,40 1000 10,0
3,20 1000 10,0

MIG welding wires Diameter 0,8mm 1,0mm 1,2mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF, PE
8. Approvals
Current/Polarity TIG =-
Current/Polarity MIG =+

1.23
1.23
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding 309 steels ~1.4829
Filler metals for welding heatelectrode
Rutil coated resistant, for non-scaling and highly
welding heat resistant steels
corrosion-proof steels
weld metal non – scaling up to +800°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels ~ 1.4829
AWS / ASME SFA-5.4 E 309 H -16
EN ISO 3581-A E 22 12 R 32

2. fields
Main Filler metals for
of applicationaluminium welding
Dissimilar steels (joint welds of austenitic to ferritic steels) cladding and buffer
layer welding.
Filler metals for titanium welding
Main base metals Heat – proof and non – scaling steels e.g.
1.4710 G-X 30 CrSi 6 1.4825 G-X 25 CrNiSi 18 9
1.4729 G-X 40 CrSi 13 1.2780 X 15 CrNiSi 20 12
3. Filler metals for welding
1.4740 mildG-X steels and
40 CrSi 17 low-alloyed1.4828 steels,
X 15 CrNiSi 20 12
1.4878 X 12 CrNiTi 18 9
special electrode for chamfering
Mechanical properties Thermal treatment untreated
of all – weld – metal Test temperature [°C] +20°
(typical values) 0,2%-yield strength Rp0,2 MPa 320
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPaand cast iron 550
Elongation A5 [%] 30
Impact strength AV [J] 55

Average chemical C Si Mn Cr Ni
0,11
5. Filler metals
composition for hard surfacing and0,9repair welding
0,5-2,50
on22,0-25,0
cold and 12,0-14,0
of all - weld – metal (%)
hot work as well as high speed steels. Cobalt base alloys
Structure Austenite with increased delta ferrite standard

Redrying 1h at +350°C.
6. Filler metals for welding copper and copper alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
Unit weights 2,50 300 50 - 70 18,6 215 4,0
3,25 350 70 - 100 36,8 136 5,0
4,00 350 90 - 140 55,0 91 5,0
7. Flux-cored wires
Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity = +/~

8. Approvals

1.24
1.24
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-309
Filler metals for welding stainless L steels 1.4332
Filler metals for welding
TIG/MIGheat
weldingresistant, non-scaling
wire of austenitic andsteel,
chrome nickel highlyvery low carbon
corrosion-proof steels
content, for cladding on stainless and dissimilar steels.
Weld metal suitable for working temperatures of up to +300°C
StandardFiller metals for joint welding
designation austenitic/ferritic
Material No. steels 1.4332
AWS/ASME SFA-5.9 ~ER 309 LSi
EN ISO 14343-A G/W 23 12 LSi

2. fields
Main Filler metals for
of applicationaluminium welding
Dissimilar steels
layer welding.
(joint welds of austenitic to ferritic steels) cladding and buffer

Filler metals for titanium welding

Main base metals Heat – proof and non – scaling steels e.g.
1.4710 G-X 30 CrSi 6 1.4825 G-X 25 CrNiSi 18 9
1.4729 G-X 40 CrSi 13 1.2780 X 15 CrNiSi 20 12
1.4740 G-X 40 CrSi 17 1.4828 X 15 CrNiTi 20-12
3. Filler metals
Mechanical properties
for welding mild
Welding process
steels and low-alloyed steels,
TIG MIG
special
of all – weld electrode forGas
– metal chamfering
shield I1 M11
(typical values) Thermal treatment [°C] untreated untreated
Test temperature +20° +20°C
0,2%-yield strength Rp0,2 MPa ≥295 ≥295
Tensile strength Rm MPa ≥510 ≥510
4. Filler metals for welding nickel,
Elongation
nickel
A5
alloys
[%]
and cast
≥25
iron ≥25
Impact strength AV [J] LNB LNB

Average chemical C Si Mn Cr Ni
composition 0,03 0,65-1,20 1,0-2,50 22,0-25,0 11,0-14,0
5. - weld
of all Filler metals
– metal for hard surfacing and repair welding on cold and
(%)
hot
Structure work as well as Austenite
high speed steels.delta
with increased Cobalt base alloys
ferrite standard

Gas types applicable TIG I1

Gas types applicable MIG M 11 and M 23
6.
Approvals
Filler metals for welding
TÜV,CE copper and copper alloys

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
1,00 1000 10,0
1,60 1000 10,0
2,00 1000 10,0
7. Flux-cored wires 2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
5,00 1000 10,0

MIG welding wires Diameter 0,8mm 1,0mm 1,2mm 1,6mm

8. Approvals
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF, PE

Current/Polarity TIG =-
Current/Polarity MIG =+

1.25
1.25
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-309
Filler metals for welding stainless L steels 1.4332
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding and
on stainless andhighly
dissimilar steels and
corrosion-proof steels
cladding ferritic steels. Weld metal of austenitic chrome – nickel steel,
very low carbon content, suitable for working temperatures up to +350°C,
Filler metals for joint welding
creep resistant austenitic/ferritic steels

Standard designation Material No. 1.4332

AWS/ASME SFA-5.4 E 309 L -16
2. Filler metals for aluminiumEN welding
ISO 3581-A E 23 12 LR 32
Main fields of application Dissimilar steels (joint welding of austenitic to ferritic steels) cladding and buffer
Filler metals for titanium welding
layer welding.
Main base metals Heat – proof and non – scaling steels e.g.
1.4710 G-X 30 CrSi 6 1.4825 G-X 25 CrNiSi 18 9
1.4729 G-X 40 CrSi 13 1.2780 X 15 CrNiSi 20 12
3. Filler metals for welding
1.4740 mildG-X steels and
40 CrSi 17 low-alloyed1.4828 steels, X 15 CrNiSi 20 12
1.4878 X 12 CrNiTi 18 9
special electrode for chamfering
Mechanical properties Thermal treatment untreated
of all – weld – metal Test temperature [°C] +20°
(typical values) 0,2%-yield strength Rp0,2 [MPa 320
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPaand cast iron 540
Elongation A5 [%] 35
Impact strength AV [J] 65

Average chemical C Si Mn Cr Ni
composition 0,02 0,9 0,9 23 12
5. Filler metals for hard surfacing and repair welding on cold and
of all - weld – metal (%)
hot work as well as high speed steels. Cobalt base alloys
Structure Austenite with increased content of delta ferrite

Redrying 1h at +300°C.
6. Filler metals for welding copper and copper alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
Unit weights 2,50 300 50 - 70 18,6 215 4,0
3,25 350 75 - 100 36,8 136 5,0
4,00 350 90 - 120 55,0 91 5,0
7. Flux-cored wires
Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity = +/~

8. Approvals

1.26
1.26
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-310
Filler metals for welding stainless steels 1.4842
Filler metals for welding
TIG/MIGheat resistant,
welding wire of fullynon-scaling and
austenitic chrome highly
nickel steel for welding
corrosion-proof steels
heat resistant steels. Weld metal non – scaling up to +1200°C.

StandardFiller metals for joint weldingMaterial

designation austenitic/ferritic
No. steels 1.4842
AWS/ASME SFA-5.9 ER 310
EN 12072 G/W 25 20

2. base
Main Filler metals
metals for aluminium
Heat-resistantwelding
and non-scaling steels, e.g.
1.4832 G-X 25 CrNiSi 20 14 1.4841 X 15 CrNiSi 25 20
Filler metals for titanium
1.4837 welding G-X 40 CrNiSi 25 12 1.4845 X 12 CrNi 25 21
1.4840 G-X 15 CrNi 25 20

Mechanical properties Welding process TIG MIG

3. – weld
of all Filler metals
– metal for welding mild steels and low-alloyed
Gas shield
Thermal treatment
steels,
I1
untreated
M11
untreated
(typical values)
special electrode forTest
chamfering
temperature [°C] +20° +20°C
0,2%-yield strength Rp0,2 MPa 315 315
Tensile strength Rm MPa 490 490
Elongation A5 [%] 25 25
4. Filler metals for welding nickel, nickel
Impact strength AV alloys
[J] and cast80iron 80

Average chemical C Si Mn Cr Ni
composition 0,12 0,5 1,0-2,50 25,0-28,0 20,0-22,5
of all - weld – metal (%)

5. Filler
Structure metals for hard Fullysurfacing
austenitic and repair welding on cold and
hot work as well
Gas types applicable TIG
as high
I1 speed steels. Cobalt base alloys
Gas types applicable MIG M 11, M 21, M 23 and M 32

TIG rod diameters, Diameter Length Kg per box

unit6.weights
Filler metals for welding copper
[mm] and copper [mm]
alloys
1,00 1000 10,0
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
7. Flux-cored wires 5,00 1000 10,0

MIG welding wires Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF, PE
8. Approvals
Current/Polarity TIG =-
Current/Polarity MIG =+

1.27
1.27
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-310
Filler metals for welding stainless steels 1.4842
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding andsteels.
heat resistant highly Weld metal of
corrosion-proof steels
fully austenitic chrome nickel steel. Non-scaling up to +1200°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 1.4842
AWS/ASME SFA-5.4 E 310-16
EN ISO 3581-A E 25 20 R 12

2. base
Main Filler metals
metals for aluminium
Heat-resistantwelding
and non-scaling steels, e.g.
Filler metals for titanium
1.4832
1.4837
welding
G-X 25 CrNiSi 20 14
G-X 40 CrNiSi 25 12
1.4841
1.4845
X 15 CrNiSi 25 20
X 12 CrNi 25 21
1.4840 G-X 15 CrNi 25 20 1.4846 X 40 CrNi 25 21

Mechanical properties Thermal treatment untreated

3. – weld
of all Filler metals for welding
– metal mild steels and low-alloyed
Test temperature [°C] steels,+20°
special electrode for0,2%-yield
(typical values) chamfering
strength Rp0,2 MPa 350
Tensile strength Rm MPa 600
Elongation A5 [%] 30
Impact strength AV [J] 60
4. Filler metals for weldingCnickel, nickel
Si
alloys and
Mn
cast iron
Cr Ni
Average chemical
composition 0,10 0,5 1,0-5,0 23,0-27,0 18,0-22,0
of all - weld – metal (%)

Structure Fully austenitic

5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as 2h
Redrying at +300°C.
high speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit6.weights 2,50 300 70 - 90 19,0 210 4,0
Filler metals for welding copper and copper alloys
3,25 350 100 - 120 36,4 137 5,0
4,00 350 120 - 140 54,2 92 5,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity
7. Flux-cored wires = +/~

8. Approvals

1.28
1.28
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-310
Filler metals for welding stainless Bsteels ~1.4842
Filler metals for welding heatelectrode
Basic coated resistant, non-scaling
for welding andsteels.
heat resistant highlyWeld metal of
corrosion-proof steels
fully austenitic chrome nickel steel. Non-scaling up to +1200°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels ~1.4842
EN ISO 3581-A E 25 20 B 22
AWS/ASME SFA-5.4 E 310-15

2. base
Main Filler metals
metals for aluminium
Heat-resistantwelding
and non-scaling steels, e.g.
Filler metals for titanium
1.4832
1.4837
welding
G-X 25 CrNiSi 20 14
G-X 40 CrNiSi 25 12
1.4841
1.4845
X 15 CrNiSi 25 20
X 12 CrNi 25 21
1.4840 G-X 15 CrNi 25 20 1.4846 X 40 CrNi 25 21

Mechanical properties Thermal treatment untreated

3. – weld
of all Filler metals for welding
– metal mild steels and low-alloyed
Test temperature [°C] steels,+20°
special electrode for0,2%-yield
(typical values) chamfering
strength Rp0,2 MPa 350
Tensile strength Rm MPa 600
Elongation A5 [%] 30
Impact strength AV [J] 70
4. Filler metals for weldingCnickel, nickel
Si
alloys and
Mn
cast iron
Cr Ni
Average chemical
composition 0,12 0,5 3 25,5 20,5
of all - weld – metal (%)

Structure Fully austenitic

5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as 2h
Redrying at +320°C.
high speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit6.weights 2,50 300 50 - 70 19,0 210 4,0
Filler metals for welding copper and copper alloys
3,25 350 70 - 90 36,4 137 5,0
4,00 350 100 - 130 54,2 92 5,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity
7. Flux-cored wires =+

8. Approvals

1.29
1.29
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-4462
Filler metals for welding stainless steels 1.4462
Filler metals for welding
TIG/MIGheat resistant,
welding non-scaling
wire of nitrogenous and highly
ferritic-austenitic chrome-nickel-
corrosion-proof steels
molybdenum-steel for welding stainless ferritic-austenitic compound
steels suitable for working temperatures of up to +250°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4462
AWS/ASME SFA-5.9 ~ER 2209
EN ISO 14343-A G/W 22 9 3 NL
2. Filler metals for aluminium welding
Stainless ferritic austenitic steel/cast steel, e.g.
Main base metals
Filler metals for titanium
1.4347 welding G-X 8 CrNi 26 7 1.4462 X 2 CrNiMoN 22 5
1.4417 X 2 CrNiMoSi 19 5 1.4582 X 4 CrNiMoNb 25 7
1.4460 X 8 CrNiMo 27 5
As well as joint welding to mild steels, low-alloyed and stainless steels/cast
steels.
3. Filler metals
Mechanical properties
for welding mild steels and low-alloyedTIG
Welding process
steels, MIG
special
of all – weld electrode forGas
– metal chamfering
shield I1 M11
(typical values) Thermal treatment untreated untreated
Test temperature [°C] +20° +20°C
0,2%-yield strength Rp0,2 MPa ≥480 ≥480
Tensile strength Rm MPa ≥680 ≥680
4. Filler metals for welding nickel,
Elongation
nickel
A5
alloys
[%]
and cast
≥25
iron ≥25
Impact strength AV [J] LNB LNB

Average chemical C Si Mn Cr Mo Ni N
composition 0,03 1,0 2,5 21,0-24,0 2,5-4,0 7,0-10,0 0,10-0,20
5. - weld
of all Filler metals
– metal for hard surfacing and repair welding on cold and
(%)
hot
Structure work as well as Ferritic-austenitic
high speed steels. Cobalt base alloys
Gas types applicable TIG I1
Gas types applicable MIG M 12
6. Filler metals for welding copper and copper alloys
TÜV, DB, CE
Approvals

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
1,60 1000 10,0
2,00 1000 10,0
7. Flux-cored wires 2,40 1000 10,0
3,20 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF
8. Approvals
Current/Polarity TIG =-
Current/Polarity MIG =+

1.30 1.30
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-4462
Filler metals for welding stainless steels 1.4462
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding and highly steels.
stainless ferritic-austenitic
corrosion-proof steels
Weld metal of nitrogenous austenitic chrome-nickel-molybdenum-steel
with increased ferrite standard and very low carbon content, suitable for
Filler metals for joint welding
working austenitic/ferritic
temperatures of up to +250°C. steels

Standard designation Material No. 1.4462

AWS/ASME SFA-5.4 E 2209
EN ISO 3581-A E 22 9 3 LR 32
2. Filler metals for aluminium welding
Filler
Main base metals
metals for titanium
Stainless welding
ferritic austenitic steel/cast steel, e.g.
1.4347 G-X 8 CrNi 26 7 1.4462 X 2 CrNiMoN 22 5
1.4417 X 2 CrNiMoSi 19 5 1.4463 G-X 6 CrNiMo 24 8 2
1.4460 X 8 CrNiMo 27 5 1.4582 X 4 CrNiMoNb 25 7
3. Filler metals for welding mild steels and low-alloyed steels,
As well as joint welding to mild steels, low-alloyed and stainless steels/cast
steels.
Mechanicalspecial electrode forThermal
properties chamfering
treatment untreated
of all – weld – metal Test temperature [°C] +20°
(typical values) 0,2%-yield strength Rp0,2 MPa 550
Tensile strength Rm MPa 750
4. Filler metals for welding nickel, nickel
Elongation A5 alloys
[%] and cast iron 35
Impact strength AV [J] 70

Average chemical C Si Mn Cr Mo Ni N
composition 0,02 0,9 0,5-2,0 21,5-23,5 2,5-3,5 7,5-10,5 0,08-0,20
of all - weld – metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
Structure
hot work as well as Ferrite-austenite
high speed steels. Cobalt base alloys
Redrying 2h at +200°C-+250°C.

Diameters, Diameter Length Current Average Pieces Kg per box

6. current,
welding Filler metals for welding copper
[mm]
and copper
[mm] [A]
alloys
weight
kg/1000 pcs.
per box

unit weights 2,50 300 50 - 70 18,5 216 4,0

3,25 350 70 - 100 37,4 134 5,0
4,00 350 90 - 140 56,3 89 5,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

7. Flux-cored wires
Current/Polarity = +/~

8. Approvals

1.31
1.31
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-904
Filler metals for welding stainless L steels 1.4519
Filler metals for welding
TIG/MIGheat
weldingresistant,
wire of fullynon-scaling and highlychrome-nickel-
austenitic, copper-containing
corrosion-proof steels
molybdenum-steel with high molybenum and very low carbon content, for
welding high-alloy steels which are strongly corrosion resistant when
Filler metals for joint welding
exposed austenitic/ferritic
to reducing steels for temperatures up to
media. Weld metal suitable
+350°C.

Standard designation Material No. 1.4519

AWS/ASME SFA-5.9 ER 385
2. Filler metals for aluminium welding
EN ISO 14343-A G/W 20 25 5 Cu L
Filler metals for titanium welding
Main base metals Exceptionally corrosion-proof steels/cast steels e.g.
1.4500 G-X 7 NiCrMoCuNb 25 20 1.4536 G-X 2NiCrMoCuN 25 20
1.4505 X 5 NiCrMoCuNb 20 18 1.4539 X 2 NiCrMoCu 25 20 5
1.4506 X 5 NiCrMoCuTi 20 18 1.4585 G-X 7 NiCrMoCuNb 18 18
3. Filler metals for welding mild steels and low-alloyed steels,
Mechanicalspecial electrode
properties forWelding
chamfering
process TIG MIG
of all – weld – metal Gas shield I1 M12
(typical values) Thermal treatment untreated untreated
Test temperature [°C] +20° - 196°C +20°C -196°C
0,2%-yield strength Rp0,2 MPa ≥320 ≥320
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and cast iron
≥510 ≥510
Elongation A5 [%] ≥25 ≥25
Impact strength AV [J] LNB LNB LNB LNB

Average chemical C Si Mn Cr Mo Ni Cu
5. Filler metals
composition for hard0,03
surfacing
1,0 and repair 19,0-22,0
1,0-4,0 welding on cold24,0-27,0
4,0-6,0 and 1,0-2,0
of all - weld – metal (%)
hot work as well as high speed steels. Cobalt base alloys
Structure Fully austenitic

Approvals TÜV, DB, CE

6. Filler metals for welding
I1
copper and copper alloys
Gas types applicable TIG
Gas types applicable MIG M 12

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
1,60 1000 10,0
7. Flux-cored wires 2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

8. Approvals
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity TIG =-
Current/Polarity MIG =+

1.32
1.32
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-904
Filler metals for welding stainless L steels 1.4519
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding and highly
of fully austenitic, copper-containing
corrosion-proof steels
chrome-nickel-moly-steel with high molybdenum and very low carbon
content, for welding high-alloy steels which are strongly corrosion
Filler metals for joint welding
resistant when austenitic/ferritic steels
exposed to reducing media. Weld metal suitable for
temperatures up to +400°C.

Standard designation Material No. 1.4519

AWS/ASME SFA-5.4 E 385-17
2. Filler metals for aluminium welding
EN ISO 3581-A E 20 25 5 Cu N LR 53
Filler metals for titanium welding
Main base metals Exceptionally corrosion resistant steel//cast steel e.g.
1.4500 G-X 7 NiCrMoCuNb 25 20 1.4536 G-X 2NiCrMoCuN 25 20
1.4505 X 5 NiCrMoCuNb 20 18 1.4539 X 2 NiCrMoCu 25 20 5
1.4506 X 5 NiCrMoCuTi 20 18 1.4585 G-X 7 NiCrMoCuNb 18 18
3. Filler metals for welding mild steels and low-alloyed steels,
As well as welded joints to mild, low-alloyed and stainless steels/cast steel.
Mechanicalspecial electrode forThermal
properties chamfering
treatment untreated
of all – weld – metal Test temperature [°C] +20°
(typical values) 0,2%-yield strength Rp0,2 MPa 450
Tensile strength Rm MPa 600
4. Filler metals for welding nickel, nickel
Elongation A5 alloys
[%] and cast iron 35
Impact strength AV [J] 70

Average chemical C Si Mn Cr Mo Ni Cu
composition 0,025 0,8 1,0-4,0 19,0-22,0 4,0-7,0 24,0-27,0 1,0-2,0
of all - weld – metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
hot
Structure work as well as Fully
highaustenitic
speed steels. Cobalt base alloys
Redrying 1h at +350°C.

Diameters, Diameter Length Current Average Pieces Kg per box

6. current,
welding Filler metals for welding
[mm]copper and copper
[mm] [A] alloys
weight
kg/1000 pcs.
per box

unit weights 2,50 300 60 - 80 30,5 131 4,0

3,25 350 80 -110 51,6 97 5,0
4,00 350 115 -140 78,2 64 5,0
5,00 450 130 -180 157,0 38 6,0

7. Flux-cored
Welding wires
positions acc.to EN ISO 6947 PA, PB

Current/Polarity = +/~

8. Approvals

1.33
1.33
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-307
Filler metals for welding stainless steels 1.4370
Filler metals for welding
MIG/TIGheat resistant,
welding non-scaling
wire of austenitic andmanganese
chrome nickel highly steel, very
corrosion-proof steels
low carbon content, for welding dissimilar steels suitable for working
temperatures of up to +300°C, cold-tough down to -120°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4370
AWS/ASME SFA-5.9 ER 307
EN ISO 14343-A G/W 18 8 Mn
2. Filler metals for aluminium welding
Main base metals Dissimilar steels (joint welding of austenitic to ferritic steels),steels with high
Filler metals for titanium welding
carbon content and difficult weldable steels, high manganese steel, e.g.
X 120 Mn 12 (1.3401); buffer layers for hardfacing; cold-tough nickel steels,
e.g. 10 Ni 14 (1.5637); 12 Ni 19 (1.5680).

3. Filler
Mechanical metals for welding
properties mild steels
Welding process
Gas shield
and low-alloyed TIG
steels,
I1
MIG
M 11
of all – weld – metal
special
(typical values) electrode for chamfering
Thermal treatment untreated untreated
Test temperature [°C] +20°C -120°C +20°C -120°C
0,2%-yield strength Rp0,2 MPa ≥295 ≥295
Tensile strength Rm MPa ≥510 ≥510
4. Filler metals for welding nickel, nickel
Elongation A5 alloys
[%] and≥25
cast iron ≥25
Impact strength AV [J] LNB LNB LNB LNB

Average chemical C Si Mn Cr Ni
composition 0,2 1,2 5,0-8,0 17,0-20,0 7,0-10,0
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
hot
Structure work as well as Austenite,
high speed steels.
possibly Cobalt
with small base
portion of delta alloys
ferrite

Gas types applicable TIG I1

Gas types applicable MIG M 11, M 12, M 32

6.
Approvals
Filler metals for welding copper and copper alloys
TÜV, DB, CE

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm] [kg]
1,00 1000 10,0
1,60 1000 10,0
7. Flux-cored wires 2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
5,00 1000 10,0
MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm
8. Approvals
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC, PG
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity TIG =-
Current/Polarity MIG =+

1.34
1.34
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-307
Filler metals for welding stainless steels 1.4370
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for joining and highly
dissimilar steels and for clad welding.
corrosion-proof steels
Weld-metal of austenitic chrome nickel manganese steel suitable for
working temperatures of up to +300°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4370
AWS/ASME SFA-5.4 E 307 - 16
EN ISO 3581-A E 18 8 Mn R 12
2. Filler metals for aluminium welding
Main base metals Dissimilar steels (welded joints between austenitic and ferritic steels),steels
Filler metals for titanium
with highwelding
carbon content and difficult weldable steels, high manganese steel,
e.g. X 120 Mn 12 (1.3401); buffer layers for hardfacing.

Mechanical properties Thermal treatment untreated

3. – weld
of all Filler metals
– metal for welding mild steels and low-alloyed
Test temperature [°C] steels,+20°
(typical values) 0,2%-yield strength Rp0,2 MPa ≥350
special electrode forTensile
chamfering
strength Rm MPa ≥500
Elongation A5 [%] ≥25
Impact strength AV [J] LNB

4. Filler
Average metals
chemical for weldingCnickel, nickel
Si alloys and
Mn cast iron
Cr Ni
composition 0,20 1,2 4,5-7,5 17,0-20,0 7,0-10,0
of all-weld-metal (%)

Structure Austenite, possibly with small portions of delta ferrite.

5. Filler metals for hard

Redrying
surfacing and repair welding on cold and
2h at +300°C.
hot work as well as high speed steels. Cobalt base alloys
Approvals TÜV, CE

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
6. current,
welding Filler metals for welding copper and copper alloys
kg/1000 pcs.
unit weights 2,50 300 70 - 90 18,3 219 4,0
3,25 350 90 - 120 33,9 148 5,0
4,00 350 100 - 140 50,8 98 5,0
5,00 350 150 - 190 79,3 63 5,0

7. Flux-cored
Welding wires
positions acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity = +/~

8. Approvals

1.35
1.35
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-307
Filler metals for welding stainless Bsteels 1.4370
Filler metals for welding heatelectrode
Basic coated resistant, non-scaling
for joining and highly
dissimilar steels as well as cladding.
corrosion-proof steels
Weld metal of austenitic chrome nickel manganese steel, suitable for
working temperatures of up to +300°C, cold-tough down to –120°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4370
EN ISO 14700 E Fe 10
AWS/ASME SFA-5.4 E 307 - 15
2. Filler metals for aluminiumEN
welding
ISO 3581-A E 18 8 Mn B 22

Filler metals for titanium

Main base metals Dissimilarwelding
steels (joining austenitic to ferritic steels);steels with high carbon
content and difficult weldable steels, high manganese steel,
e.g. X 120 Mn 12 (1.3401); buffer layers for hardfacing, cold-tough steel, e.g.
10 Ni 14 (1.5637), 12 Ni 19 (1.5680).
3. Filler metals for welding
Mechanical properties Thermalmild steels and low-alloyed
treatment steels,
untreated untreated
special
of all – weld electrode
– metal forTest
chamfering
temperature [°C] +20°C -120°C
(typical values) 0,2%-yield strength Rp0,2 MPa 350
Tensile strength Rm MPa 600
Elongation A5 [%] 40
4. Filler metals for welding nickel, nickel
Impact strength AV alloys
[J] and cast
60 iron 35

Average chemical C Si Mn Cr Ni
composition 0,10 0,5 4,5-7,5 17,0-20,0 7,0-10,0
of all-weld-metal (%)

5. Filler
Structure metals for hard surfacing
Austenite, possibly and repair
with small welding
portions on cold and
of delta ferrite
hot
Redrying
work as well as high speed
2h at +320°C.
steels. Cobalt base alloys

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
6. Filler metals for welding
unit weights 2,50
copper and copper
300 50 - 70
alloys
16,1
kg/1000 pcs.
249 4,0
3,25 350 80 - 100 31,0 161 5,0
4,00 350 100 - 130 46,2 108 5,0
5,00 450 130 - 160 93,0 65 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF, PE

7. Flux-cored wires
Current/Polarity =+~

8. Approvals

1.36
1.36
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-307
Filler metals for welding stainlessHL steels ~1.4370
Filler metals for welding heathigh
Rutile coated resistant,
depositionnon-scaling
electrode givingand
160 %highly
recovery.
corrosion-proof steels
Designed for joining dissimilar steels as well as cladding.
Welding deposit of austenitic chrome-nickel-manganese steel, suitable
Filler metals for joint welding
for working austenitic/ferritic
temperatures steels
of up to +300°C.

Standard designation Material No. 1.4370

EN ISO 14700 E Fe 10
2. Filler metals for aluminium welding
AWS/ASME SFA-5.4 E 307 - 26
EN ISO 3581-A E 18 8 Mn R 53
Filler metals for titanium welding
Main base metals Dissimilar steels (joint welding of austenitic to ferritic steels); steels with high
carbon content and difficult weldable steels, high manganese steel e.g.
X 120 Mn 12 (1.3401), buffer layers for hardfacing.
3. Filler metals for welding mild steels and low-alloyed steels,
Mechanical properties Thermal treatment untreated
special
of all – weld electrode
– metal forTest
chamfering
temperature [°C] +20°
(typical values) 0,2%-yield strength Rp0,2 [MPa 350
Tensile strength Rm MPa 600
Elongation A5 [%] 40
4. Filler metals for welding nickel, nickel
Impact strength AV alloys
[J] and cast iron 60
Average chemical C Si Mn Cr Ni
composition 0,10 0,5 4,5-7,5 17,0-20,0 7,0-10,0
of all-weld-metal (%)
5. Filler metals for hard
Structure
surfacing and repair welding on cold and
Austenite, possibly with small portions of delta ferrite
hot work as well as high speed steels. Cobalt base alloys
Redrying 2h at +320°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
6. current,
welding Filler metals for welding copper and copper alloys
kg/1000 pcs.
unit weights 2,50 350 80 - 110 31,9 125 4,0
3,25 450 110 - 150 69,0 87 6,0
4,00 450 140 - 200 103,0 58 6,0
5,00 450 210 - 260 163,3 37 6,0

7. Flux-cored
Welding wires
positions acc.to EN ISO 6947 PA, PB

Current/Polarity = +/ ~

8. Approvals

1.37
1.37
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-312
Filler metals for welding stainless steels 1.4337
Filler metals for welding
MIG/TIGheat
weldingresistant, non-scaling
wire of ferritic-austenitic and highly
chrome-nickel steel
corrosion-proof steels
suitable for joint-welding dissimilar steels and for resurfacing
non-scaling up to +1000°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4337
AWS/ASME SFA-5.9 ER 312
EN ISO 14343-A G/W 29 9
2. Filler metals for aluminium welding
Main base metals Non-corrosive similar steels and cast-steels, e.g. 1.4762 (X 10 CrAl 24),
Filler metals for titanium welding
1.4085 (G-X70 Cr 29); difficult weldable steel, e.g. highly solid construction
steel, high manganese steel and joint with to high-alloy steels; repair welding
and wear resistant hardfacing.

3. Filler
Mechanical metals
for welding
properties mild steels and low-alloyed
Gas shield
Thermal treatment [°C]
steels,
M 11
untreated
of all – weld – metal
special electrode forTest
chamfering
temperature +20°
(typical values) 0,2%-yield strength Rp0,2 MPa 560
Tensile strength Rm MPa 740
Elongation A5 [%] 25
-6
4. Filler metals for welding nickel,
Lin. Thermal nickel
expansion
Coefficient (20-400°C)
alloys
[1/K] and cast iron15x10

Average chemical C Si Mn Cr Ni
composition 0,12 0,4 1,0-2,5 28,0-32,0 8,0-12,0
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as ferritic-austenitic
Structure
high speed steels. Cobalt base alloys
Gas types applicable TIG I1
Gas types applicable MIG M 11

TIG6.rod diameters,
Filler metals for welding Diameter
copper and copper Length
alloys Kg per box
unit weights [mm] [mm] [kg]
1,00 1000 10,0
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
7. Flux-cored wires 3,20
4,00
1000
1000
10,0
10,0
5,00 1000 10,0

MIG welding wire: Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC, PG
8. Approvals
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity TIG =-
Current/Polarity MIG =+

1.38
1.38
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-312
Filler metals for welding stainless steels 1.4337
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for joining and highly
dissimilar steels and for hardfacing.
corrosion-proof steels
Welding deposit consisting of ferritic-austenitic chrome-nickel-steel; non-
scaling up to +1000°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.4337
AWS/ASME SFA-5.4 ER 312 - 26
EN ISO 3581-A E 29 9 R 12
2. Filler metals for aluminium welding
Main fields of Non-corrosive steels of similar kind and cast-steel, e.g. 1.4762 (X 10 CrAl 24),
Fillermetals for titanium welding
1.4085 (G-X70 Cr 29); difficultly weldable steel, e.g. heavy sectional
application
construction steel, high manganese steel and welding joints with to high-alloy
steel; repair welding and wear resistant hardfacing.

3. Filler
Mechanical metals for welding
properties mild steels and low-alloyed
Thermal treatment
Test temperature [°C]
steels,
untreated
+20°
of all – weld – metal
special
(typical values) electrode for chamfering
0,2%-yield strength Rp0,2 MPa 450
Tensile strength Rm MPa 650
Elongation A5 [%] 15
-6
Lin.thermal expansion [1/K] 15x10
4. Filler metals for welding nickel,
Coefficient nickel
(20-400°C) alloys and cast iron
Average chemical C Si Mn Cr Ni
composition 0,15 1,20 2,50 27,0-31,0 8,0-12,0
of all-weld-metal (%)

5. Filler
Structure metals for hard surfacing and repair welding on cold and
ferritic-austenitic
hot work as well as high speed steels. Cobalt base alloys
Redrying 2h at +300°C.

Approvals DB, CE

6. Filler metals for welding

Diameters, copper
Diameter and copper
Length Current alloys
Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 1,60 250 30-50 6,5 615 4,0
2,00 250 40 - 50 9,2 270 2,5
2,50 300 60 - 70 18,0 221 4,0
3,25 350 70 - 100 43,8 114 5,0
7. Flux-cored wires 4,00 350 90 - 140 51,5 97 5,0
5,00 350 130 - 170 81,9 61 5,0

Welding positions acc.to EN ISO 6947 PA, PB

Current/Polarity
8. Approvals = +/ ~

1.39
1.39
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-312
Filler metals for welding stainless HL steels 1.4337
Filler metals for welding heathigh
Rutile coated resistant,
depositionnon-scaling
electrode givingand highly
170 % recovery, designed
corrosion-proof steels
for joining dissimilar steels and for resurfacing. The welding deposit
consists of ferritic-austenitic chrome nickel steel, non-scaling up to
Filler metals for joint welding austenitic/ferritic steels
+1000°C

Standard designation Material No. 1.4337

AWS/ASME SFA-5.4 ER 312 - 16
2. Filler metals for aluminiumEN
welding
ISO 3581-A E 29 9 MPR 23 120

Filler
Main fields of
metals for titanium welding
Non-corrosive steels of similar composition and cast-steel, e.g. 1.4762 (X 10
application CrAl 24), 1.4085 (G-X70 Cr 29); difficultly weldable steels, heavy sectional
construction steel, high manganese steel and welded joints with high-alloy
steel; repair welds and wear resistant hardfacing.
3. Filler metals for welding
Mechanical properties
mild steels and low-alloyed steels,
Thermal treatment untreated
special
of all – weld electrode
– metal forTest
chamfering
temperature [°C] +20°
(typical values) 0,2%-yield strength Rp0,2 MPa 450
Tensile strength Rm MPa 650
Elongation A5 [%] 20
4. Filler metals for welding nickel,
Lin. Thermal nickel
expansion alloys
[1/K] and cast iron15x10-6
Coefficient (20-400°C)

Average chemical C Si Mn Cr Ni
composition 0,12 1,0 0,5-2,5 28,0-32,0 8,0-10,5
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
hot
Structure work as well as ferritic-austenitic
high speed steels. Cobalt base alloys
Redrying 2h at +320°C.

Diameters, Diameter Length Current Average Pieces Kg per box

6. current,
welding Filler metals for welding copper[mm]
[mm] and copper
[A] alloysweight per box
kg/1000 pcs.
unit weights 2,00 300 50 - 80 16,9 237 4,0
2,50 350 70 - 120 32,0 125 4,0
3,25 350 110 - 160 54,0 93 5,0
4,00 350 135 - 175 105,0 57 6,0
5,00 450 210 - 260 161,0 37 6,0
7. Flux-cored wires
Welding positions acc.to EN ISO 6947 PA, PB

Current/Polarity = +/ ~

8. Approvals

1.40
1.40
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys 1

1. MT-309
Filler metals for welding stainless Mo steels 1.4459
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding dissimilarand
steelshighly
and cladding
corrosion-proof steels
stainless steels. Welding deposit of austenitic chrome nickel
molybdenum-steel, very low carbon content, suitable for working
Filler metals for joint weldingupaustenitic/ferritic
temperatures to +350°C. steels
Standard designation Material No. 1.4459
AWS/ASME SFA-5.4 E 309 Mo L - 16
2. Filler metals for aluminiumEN
welding
ISO 3581-A E 23 12 2 LR 32

Filler metals for titanium

Main fields of application
welding
Dissimilar steels (joining austenitic to ferritic steels); cladding and buffer layer
welding.

Mechanical properties Thermal treatment untreated

3. – weld
of all Filler metals
– metal for welding mild steels and low-alloyed
Test temperature [°C] steels,+20°
(typical values) 0,2%-yield strength Rp0,2 MPa 350
special electrode forTensile
chamfering
strength Rm MPa 550
Elongation A5 [%] 25
Impact strength AV [J] LNB

4. Filler
Average metals
chemical for welding
C nickel, Si
nickel alloys
Mn and cast
Cr iron Mo Ni
composition 0,04 1,2 2,5 22,0-25,0 2,0-3,0 11,0-14,0
of all-weld-metal (%)

Structure Austenite with increased portion of delta ferrite

5. Filler metals for hard surfacing and repair welding on cold and
2h at +300°C.
Redrying
hot work as well as high speed steels. Cobalt base alloys
Approvals TÜV, DB, CE

Diameters, Diameter Length Current Average Pieces Kg per box

[mm]
6. current,
welding Filler metals for welding copper[mm] [A]
and copper alloysweight
kg/1000 pcs.
per box

unit weights 2,00 300 40 - 60 11,6 345 4,0

2,50 300 60 - 80 18,7 214 4,0
3,25 350 80 - 110 36,8 136 5,0
4,00 350 110 - 150 55,0 91 5,0
5,00 450 150 - 190 110,8 54 6,0
7. Flux-cored wires PA, PB, PC, PF
Welding positions acc.to EN ISO 6947

Current/Polarity = +/ ~

8. Approvals

1.41
1.41
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Superduplex steels ~1.4410
StandardFiller metals for welding heat
designation resistant,
EN ISO 14343-A non-scaling and highly
G/W 25 9 4 NL
corrosion-proof steels Material No. ~1.4410
AWS/ASME SFA-5.9
Filler metals for joint welding austenitic/ferritic steels ~ER 25 9 4
Main fields of application 1.4410 X 2 CrNiMoN 25 7 4 1.4469 X 2 CrNiMoN 26 7 4
1.4467 X 2 CrMnNiMoN 26 5 4 1.4501 X 2 CrNiMoCuWN 25 7 4
1.4468 GX 2 CrNiMoN 25 6 3 1.4515 GX 3 CrNiMoCuN 26 6 3
2. Filler metals for aluminium
1.4507 welding
X 2 CrNiMoCuN 25 6 3 1.4508 GX2CrNiMoCuWN25-8-4
Filler metals for titanium
Mechanical properties
welding
Gas shield M 12
of all – weld – metal Thermal treatment [°C] untreated
Test temperature +20°
(typical values) 0,2%-yield strength Rp0,2 MPa 670
3. Filler metals for welding mild steels
Tensile strength Rmand low-alloyed
MPa steels,850
special electrode forElongation
chamfering
Impact strength
A5
AV
[%]
(J)
25
120

Average chemical C Si Mn Cr Mo Ni N Cu
composition 0,02 0,6 2,5 24,0-27,0 2,5-4,5 8,0-10,5 0,20-0,30 1,5
4. Filler metals
of all-weld-metal (%) for welding nickel, nickel alloys and cast iron
Gas types applicable TIG I1
Gas types applicable MIG M 12, M 13

TIG rod diameters, Diameter Length Kg per box

unit5.weights
Filler metals
for hard surfacing
[mm] and repair welding
[mm] on cold and [kg]
hot work as well as high speed
1,60 steels. Cobalt base
1000 alloys 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0

6.welding
MIG Filler metals
wire: for welding
Diametercopper and copper alloys
0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC, PG
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity WIG =-
7. Flux-cored
Current/Polarity TIG wires =+

8. Approvals

1.42

1.42
 METAL
METALTECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Weldingalloys
alloys -- Special
Specialalloys
alloys

Aluminium and Titanium

1. Filler metals for welding stainless steels 2
Filler Filler
metalsmetals
for aluminium welding
for welding heat resistant, non-scaling and highly
Filler corrosion-proof
metals for titanium welding
Filler Filler
metalsmetals
steels
for magnesium weldingaustenitic/ferritic steels
for joint welding 2
MTC-Name Material No. AWS Page
2. Filler metals
MIG/TIG for99,5
MT-Al aluminium welding
3.0259 ER 1100 2.02
MIG/TIG MT-Al
Filler metals for99,5 Ti
titanium 3.0805
welding ER 1450 Ti 2.03
MIG/TIG MT-AlMg 3 3.3536 ER 5754 2.04
MIG/TIG MT-AlMg 5 3.3556 ER 5356 2.05
MIG/TIG MT-AlMg 4,5 Mn 3.3548 ER 5183 2.06
3. Filler metals
MIG/TIG for welding
MT-AlMg mild3.3546
4,5 Mn Zr steels and low-alloyed
ER 5087 steels,2.07
MIG/TIGspecial electrode
MT-AlSi for
5 chamfering3.2245 ER 4043 2.08
Elektr. MT-AlSi 5 3.2245 ER 4043 2.09
MIG/TIG MT-AlSi 12 3.2585 ER 4047 2.10
Elektr. MT-AlSi 12 3.2585 ER 4047 2.11
4. Filler metals
MIG/TIG forTi
MT-ER welding
1 nickel,
- nickel alloysER and
Ti 1 cast iron2.12
MIG/TIG MT-ER Ti 2 3.7035 ER Ti 2 2.13
MIG/TIG MT-ER Ti 5 3.7165 ER Ti 5 2.14
MIG/TIG MT-ER Ti 7 3.7235 ER Ti 7 2.15
TIG MT-Magnesium - ~R AZ61 A 2.16
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals
 METALTECHNOLOGY-CANTERBO
METAL TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Welding alloys
alloys - - Special
Special alloys
alloys

Allocation base material – filler material

1. Filler metals for welding stainless steels
Filler
Material No. metals for welding
Short term AWSheat resistant, non-scaling
Filler metals MTC and highly
Page
3.0205 Al 99 1200 MT-Al 99,5 Ti 2.03
3.0285 corrosion-proof
Al 99,8
3.0275 Filler metals
steels 1080A
Al 99,7 for joint welding
1070A
MT-Al 99,5 Ti
austenitic/ferritic
MT-Al 99,5 Ti steels
2.03
2.03 2
3.0257 E-Al 1350A MT-Al 99,5 Ti 2.03
3.0255 Al 99,5 1050A MT-Al 99,5 Ti 2.03
3.0205 Al 99 1200 MT-Al 99,5 Ti 2.03
2. Filler metals
3.0515 AlMn 1 for aluminium 3103 welding MT-AlMg 3 2.04
3.3315 AlMg 1 5005A MT-AlMg 3 / MT-AlMg 5 2.04 / 2.05
3.3326 Filler metals
AlMg 1,8 for titanium welding MT-AlMg 3 / MT-AlMg 5
5051A 2.04 / 2.05
3.3535 AlMg 3 5754 MT-AlMg 3 / MT-AlMg 5 2.04 / 2.05
3.3555 AlMg 5 5019 MT-AlMg 5 / MT-AlMg 4,5 Mn 2.05 / 2.06
3.3527 AlMg 2 Mn o,8 5049 MT-AlMg 3 / MT-AlMg 5 2.04 / 2.05
3. Filler AlMg
3.3537 metals for welding
2,7 Mn 5454mild steels and low-alloyed
MT-AlMg 3 / MT-AlMg 5 steels, 2.04 / 2.05
3.3545 AlMg 4 Mn 5086 MT-AlMg 5 / MT-AlMg 4,5 Mn 2.05 / 2.06
3.3547
special electrode
AlMg 4,5 Mn
for chamfering
5083 MT-AlMg 5 / MT-AlMg 4,5 Mn 2.05 / 2.06
3.3206 AlMgSi o,5 6060/6063 MT-AlSi 5 / MT-AlMg 5 2.08 / 2.05
3.3210 AlMgSi 0,7 6005A MT-AlSi 5 / MT-AlMg 5 2.08 / 2.05
3.2315 AlMgSi 1 6082 MT-AlSi 5 / MT-AlMg 5 2.08 / 2.05
4. Filler metals
3.3211 AlMg 1 Sifor
Cu welding6061nickel, nickel alloys
MT-AlSi and cast
5 / MT-AlMg 5 iron 2.08 / 2.05
3.4335 AlZn 4,5 Mg 1 7020 MT-AlMg 5 / MT-AlMg 4,5 Mn 2.05 / 2.06
3.2581 G-AlSi 12 A413 MT-AlSi 12 2.10
3.2583 G-AlSi 12 (Cu) 413.1 MT-AlSi 12 2.10
3.2211 G-AlSi 11 - MT-AlSi 12 2.10
3.2381 G-AlSi 10 Mg A360 MT-AlSi 12 2.10
5.
3.2383 Filler metals for hard
G-AlSi 10 Mg (Cu) surfacing
- and repair
MT-AlSi 12 welding on cold and
2.10
3.2373 hot work as9well
G-AlSi Mg as high 359speed steels. Cobalt
MT-AlSi 12 base alloys 2.10
3.2371 G-AlSi Mg A365.2 MT-AlSi 12 2.10
3.2341 G-AlSi 5 Mg - MT-AlSi 5 2.08
3.2161 G-AlSi 8 Cu 3 380.1 MT-AlSi 12 2.10
3.2151
6. Filler G-AlSi
metals 6 Cu 4 welding
for 319.2
copper andMT-AlSi 5 / MT-AlSi
copper alloys12 2.08 / 2.10
3.3561 G-AlMg 5 514.1 MT-AlMg 5 / MT-AlMg 4,5 Mn 2.05 / 2.06
3.3261 G-AlMg 5 Si - MT-AlMg 5 / MT-AlMg 4,5 Mn 2.05 / 2.06
3.3541 G-AlMg 3 514 MT-AlMg 5 / MT-AlMg 4,5 Mn 2.05 / 2.06
3.3241 G-AlMg 3 Si F/B514.0 MT-AlMg 5 / MT-AlMg 4,5 Mn 2.05 / 2.06
3.4365 AlZnMgCu 1,5 7075 MT-AlMg 4,5 Mn 2.06

7. information
The Flux-cored wires
on our products contained in the table.
Are based on careful examination.
We assume no liability for the correctness.
We ask the user to check our data and the products for their own use.
8. Approvals

2.01
2.01
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Al
Filler metals for welding 99,5
stainless steels 3.0259
Filler metals for welding heat
Aluminium resistant,
MIG/TIG non-scaling
wire for welding and highly
pure aluminium.
corrosion-proof steels
Standard designation Material No. 3.0259
Filler metals for joint welding austenitic/ferritic steels ER 1100
AWS/ASME SFA-5.10
EN ISO 18273 S Al 1100

Main base metals Pure aluminium

2. Filler metals for aluminium welding
e.g. Al 99,5 (3.0255), Al 99 (3.0205)
Filler metals
Physical properties
for titanium welding
El.conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (20-100°C)
[1/K]
. -6
34 - 36 210 - 230 23,5 10
3. Filler metals for welding mild steels and low-alloyed steels,
special
Mechanical electrode forWelding
properties chamfering
process TIG MIG
of all – weld – metal Gas shield I1 I1
(typical values) Thermal treatment untreated untreated
Test temperature [°C] +20°C +20°C
0,2%-yield strength Rp0,2 [MPa 30 30
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and cast80iron 80
Elongation A5 [%] 35 35

Average chemical Al other

composition basic 0,5
5. Filler metals
of all-weld-metal (%) for hard surfacing and repair welding on cold and
hot work
Application notes
as well as The
high speed
weld steels.
seam area has toCobalt base
be clean and freealloys
from oxide flim. On larger work
pieces and for wall thickness exceeding 15 mm preheat the welding groove
area to +150°C.

Gas6.types I1
Filler metals
applicable TIG for welding
I1
copper and copper alloys
Gas types applicable MIG

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
1,60 1000 10,0
2,00 1000 10,0
7. Flux-cored wires 2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
5,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

8. Approvals
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PF

Current/Polarity TIG ~
Current/Polarity MIG =+

2..02
2.02
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Al
Filler metals for welding 99,5
stainless Ti
steels 3.0805
Filler metals for welding heat
Aluminium resistant,
MIG/TIG non-scaling
wire for welding and highly
pure aluminium.
corrosion-proof steels
Standard designation
Filler metals for joint welding
Material No.
austenitic/ferritic steels ER 1450
AWS/ASME SFA-5.10
3.0805 2
EN ISO 18273 S Al 1450

Main base metals Pure aluminium

2. Filler metals for aluminium welding
e.g. Al 99,5 (3.0255), Al 99 (3.0205)
Filler metals
Physical properties
for titanium welding
El.conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (20-100°C)
[1/K]
. -6
34 - 36 210 - 230 23,5 10
3. Filler metals for welding mild steels and low-alloyed steels,
special
Mechanical electrode forWelding
properties chamfering
process TIG MIG
of all – weld – metal Gas shield I1 I1
(typical values) Thermal treatment untreated untreated
Test temperature [°C] +20°C +20°C
0,2%-yield strength Rp0,2 MPa 30 30
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and cast80iron 80
Elongation A5 [%] 40 35

Average chemical Al Ti
composition basic 0,15
5. Filler metals
of all-weld-metal (%) for hard surfacing and repair welding on cold and
hot work
Application notes
as well as The
high speed
weld steels.
seam area has toCobalt base
be clean and freealloys
from oxide flim. On larger work
pieces and for wall thickness exceeding 15 mm preheat the welding groove
area to +150°C.

Gas6.types I1
Filler metals
applicable TIG for welding
I1
copper and copper alloys
Gas types applicable MIG

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
1,60 1000 10,0
2,00 1000 10,0
7. Flux-cored wires 2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
5,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

8. Approvals
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PF

Current/Polarity TIG ~
Current/Polarity MIG =+

2.03
2.03
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-AlMg
Filler metals for welding 3
stainless steels 3.3536
Filler metals for welding heat resistant, non-scaling
Aluminium-magnesium-alloyed and
MIG/TIG wire for highly
welding AlMg alloys.
corrosion-proof steels
Standard designation Material No. 3.3536
Filler metals for joint welding austenitic/ferritic steels ER 5754
AWS/ASME SFA-5.10
EN ISO 18273 S Al 5754 (AlMg3)

Main base metals Aluminium-magnesium alloys

2. Filler metals for aluminium
e.g. AlMg 1,8welding
(3.3326), AlMg 3 (3.3535), sowie AlMn 1 (3.0515)
Filler metals
Physical properties
for titanium welding
El.conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (20-100°C)
[1/K]
-6
20-23 130-170 23,7 10
3. Filler metals for welding mild steels and low-alloyed steels,
special
Mechanical electrode forWelding
properties chamfering
process TIG MIG
of all – weld – metal Gas shield I1 I1
(typical values) Thermal treatment untreated untreated
Test temperature [°C] +20°C +20°C
0,2%-yield strength Rp0,2 MPa] 80 80
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and cast
200iron 200
Elongation A5 [%] 20 20

Average chemical Al Mg Mn Cr Ti
composition Basic 2,60-3,60 0,50 0,3 0,15
5. Filler metals
of all-weld-metal (%) for hard surfacing and repair welding on cold and
hot work
Application notes
as well as For
high speed
larger steels.
work pieces andCobalt basethan
thicker sections alloys
15 mm preheat to +150 °C.

Gas types applicable TIG I1

Gas types applicable MIG I1
6. Filler metals for welding copper and copper alloys
TIG rod diameters, Diameter Length Kg per box
unit weights [mm] [mm]
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
7. Flux-cored wires 3,20
4,00
1000
1000
10,0
10,0
5,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

8. Approvals
Welding positions TIG acc.to EN ISO 6947 PA, PB, PF

Current/Polarity TIG ~
Current/Polarity MIG =+

2.04
2.04
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-AlMg
Filler metals for welding 5
stainless steels 3.3556
Filler metals for welding heat resistant,
Aluminium-magnesium non-scaling
alloyed and
MIG/TIG wire for highly
welding AlMg alloys.
corrosion-proof steels
Standard designation
Filler metals for joint welding
Material No.
austenitic/ferritic steels ER 5356
AWS/ASME SFA-5.10
3.3556 2
EN ISO 18273 S Al 5356 (AlMg5Cr(A))

Main base metals Aluminium-magnesium alloys

2. Filler metals for aluminium welding
e.g. AlMg 1 (3.3315), AlMg 3 (3.3535), AlMg 5 (3.3555) sowie AlMgSi 1
(3.2315)
Filler metals for titanium welding
Physical properties El.conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (20-100°C)
[1/K]
3. Filler metals for welding mild
15-19 steels and low-alloyed
110-150 steels, 23,7 10
-6

special electrode for chamfering

Mechanical properties Welding process TIG MIG
of all – weld – metal Gas shield I1 I1
(typical values) Thermal treatment untreated untreated
Test temperature [°C] +20°C +20°C
4. Filler metals for welding nickel,
0,2%-yield strengthnickel
Rp0,2 alloys
MPa and cast
110iron 110
Tensile strength Rm MPa 250 250
Elongation A5 [%] 25 25

Average chemical Al Mg Mn Cr Ti
5. Filler metals
composition for hard surfacing
Basic
and repair welding
4,50-5,50 0,05-0,20
on0,05-0,20
cold and 0,06-0,20
of all-weld-metal (%)
hot work as well as high speed steels. Cobalt base alloys
Application notes For larger work pieces and thicker sections than 15 mm preheat to +150 °C.

Gas types applicable TIG I1

Gas6.types
Filler metals
applicable MIGfor welding copper
I1, Monomix (I1 with and
0,015 copper
% N2) alloys
Approvals TÜV, DB, CE

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
1,60 1000 10,0
7. Flux-cored wires 2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
5,00 1000 10,0

8.welding
MIG Approvals
wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PF

Current/Polarity TIG ~
Current/Polarity MIG =+

2.05
2.05
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-AlMg
Filler metals for welding 4,5 Mn
stainless steels 3.3548
Filler metals for welding heat resistant, non-scaling
Aluminium-magnesium-alloyed and
MIG/TIG wire for highly
welding aluminium
corrosion-proof steels
alloys.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 3.3548
AWS/ASME SFA-5.10 ER 5183
EN ISO 18273 S Al 5183 (AlMg4,5Mn0,7(A))

2. base
Main Filler metals
metals for aluminium weldingalloys
Aluminium-magnesium
e.g. AlMg 3 (3.3535), AlMg 4,5 Mn (3.3547), AlMg 5 (3.3555); conditionally also
Filler metals for titanium welding
for age-hardenable alloys like AlCuMg 1 (3.1325), AlMgSi 1 (3.2315),
AlZn 4,5 Mg 1 (3.4335) AlZnMgCu 1,5 (3.4365)

Physical properties El. conductivity Thermal conductivity Linear thermal

at 20°C at 20°C expansion coefficient
3. values)
(typical Filler metalsfor welding[Smild
m/mmsteels
] . and low-alloyed
2
[W/(m K)] steels, .
(20 - 100°C)
special electrode for chamfering
16 - 19 110 - 120
[1/K]
23,7 10
-6

Mechanical properties Welding process TIG MIG

of all-weld-metal Gas shield I1 I1
4. values)
(typical Filler metals for welding
Thermalnickel,
treatmentnickel alloys and cast iron
untreated untreated
Test temperature [°C] +20°C +20°C
0,2%-yield trength Rp0,2 MPa 140 140
Tensile strength Rm MPa 280 280
Elongation A5 [%] 20 20

5. Filler
Average metals for hard surfacing
chemical Al andMg repair welding
Mn on cold
Cr and Ti
hot work as well as high
composition speed steels.
Basic Cobalt0,50-1,0
4,30-5,20 base alloys
0,05-0,25 0,15
of all-weld-metal (%)

Application notes The seam area has to be clean and free of oxide flim. Preheat larger work
pieces to +150°C.
6. Filler metals for welding copper
Weld seams and copper
on age-hardenable alloysalloys
should not be located in areas subject
to high mechanical stress.

Gas types applicable TIG I1

Gas types applicable MIG I1, Monomix (I1 with 0,015 % N2)

Approvals TÜV, DB, CE

7. Flux-cored wires
TIG rod diameters available, Diameter Length kgs
[mm] [mm] per box
unit weights 1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
8. Approvals 3,20 1000 10,0
4,00 1000 10,0
5,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PF

Current/Polarity TIG ~
Current/Polarity MIG =+

2.06
2.06
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-AlMg
Filler metals for welding 4,5 MnZr
stainless steels 3.3546
Filler metals for welding heat resistant, non-scaling
Aluminium-magnesium-alloyed and
MIG/TIG wire for highly
welding aluminium
corrosion-proof steels
2
alloys.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 3.3546
AWS/ASME SFA-5.10 ER 5087
EN ISO 18273 S Al 5087 (AlMg4,5MnZr)

2. base
Main Filler metals
metals for aluminium welding
Aluminium-magnesium-alloys
e.g. AlMg 3 (3.3535), AlMg 4,5 Mn (3.3547), AlMg 5 (3.3555); conditionally for
Filler metals for titanium welding
age-hardenable alloys like AlCuMg 1 (3.1325), AlMgSi 1 (3.2315),
AlZn 4,5 Mg 1 (3.4335)

Physical properties El. conductivity Thermal conductivity Linear thermal

at 20°C at 20°C expansion coefficient
3. values)
(typical Filler metalsfor welding[Smild
m/mmsteels
] . and low-alloyed
2
[W/(m K)] steels, .
(20 - 100°C)
special electrode for chamfering
16 - 19 110 - 120
[1/K]
23,7 10
-6

Mechanical properties Welding process TIG MIG

of all-weld-metal Gas shield I1 I1
4. values)
(typical Filler metals for welding
Thermalnickel,
treatmentnickel alloys and cast iron
untreated untreated
Test temperature [°C] +20°C +20°C
0,2%-yield strength Rp0,2 MPa 140 140
Tensile strength Rm MPa 300 300
Elongation A5 [%] 20 20

5. Filler
Average metals for hard surfacing
chemical Al and repair
Mg MnweldingCr on cold and
Ti Zr
hot work as well as high
composition Basicspeed4,50-5,20
steels. Cobalt base0,05-0,25
0,70-1,10 alloys 0,15 0,10-0,20
of all-weld-metal (%)

Application notes The seam area has to be clean and free of oxide flim. Preheat larger work
pieces to +150°C.
6. Filler metals for welding copper
Weld seams and copper
on age-hardenable alloysalloys
should not be located in areas subject
to high mechanical stress.

Gas types applicable TIG I1

Gas types applicable MIG I1, Monomix (I1 with 0,015 % N2)

TÜV, DB, CE
7. Flux-cored
Approvals wires
TIG rod diameters available, Diameter Length kgs
[mm] [mm] per box
unit weights 1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
8. Approvals 3,20 1000 10,0
4,00 1000 10,0
5,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PF

Current/Polarity TIG ~
Current/Polarity MIG =+

2.07
2.07
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-AlSi
Filler metals for welding stainless5steels 3.2245
Filler metals for welding heat resistant,MIG/TIG
Aluminium-silicon-alloyed non-scaling and
wire welding highly
AlSi-Alloys.
corrosion-proof steels
Standard designation Material No. 3.2245
Filler metals for joint welding austenitic/ferritic steels ER 4043
AWS/ASME SFA-5.10
EN ISO 18273 S Al 4043A (AlSi 5(A))

Main base metals Aluminium-silicon alloys as well as joining dissimilar aluminium alloys to each
2. Filler metals for aluminium welding
other. Conditionally suitable for age-hardenable alloys like AlCuMg 1 (3.1325),
AlMgSi 1 (3.2315), AlZn 4,5 Mg 1 (3.4335)
Filler metals for titanium welding
Physical properties El. conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansion coefficient
[S . m/mm2] [W/(m . K)] (20 - 100°C)
[1/K]
3. Filler metals for welding mild
24 - 32 steels and low-alloyed
170 steels, 22,1 .
10
-6

special electrode for chamfering

Mechanical properties Welding process TIG MIG
of all-weld-metal Base metal AlSi 5 AlMgSi1
(typical values) Material thickness (mm) 6 6
Gas shield I1 I1
4. Filler metals for welding
Thermalnickel,
treatmentnickel alloys and cast iron
untreated untreated
Test temperature [°C] +20°C +20°C
0,2%-yield strength Rp0,2 MPa 100 100
Tensile strength Rm MPa 160 160
Elongation g A5 [%] 15 15

5. Filler metals for hard surfacing Aland repair welding on coldSiand

Average chemical
hot work as
composition well as high speed Basis
steels. Cobalt base alloys 4,50-6,0
of all-weld-metal (%)

Gas types applicable TIG I1

Gas6.types
Filler metals
applicable MIGfor welding
I1 copper and copper alloys
Approvals TÜV, DB , CE

TIG rod diameters available, Diameter Length kgs

[mm] [mm] per box
unit weights 1,60 1000 10,0
7. Flux-cored wires 2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0
4,00 1000 10,0
5,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

8. Approvals
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC
Welding positions TIG acc.to EN ISO 6947 PA, PB, PF

Current/Polarity TIG ~
Current/Polarity MIG =+

2.08 2.08
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-AlSi
Filler metals for welding stainless5steels 3.2245
Filler metals for welding heat resistant,
Special-coated electrode for non-scaling and highly
welding aluminium-silicon alloys.
corrosion-proof steels
2
Weld-metal: aluminium-silicon-alloy

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 3.2245
AWS/ASME SFA-5.3 E 4043

Main base metals Aluminium-silicon alloys as well as dissimilar aluminium alloys joined to each
2. Filler metals for aluminium welding
other. Conditionally also suitable for age-hardening alloys like e.g. AlCuMg 1
(3.1325), AlMgSi 1 (3.2315), AlZn 4,5 Mg 1 (3.4335)
Filler metals for titanium welding
Physical properties El. conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansion coefficient
[S . m/mm2] [W/(m . K)] (20 - 100°C)
[1/K]
3. Filler metals for welding mild
24 - 32 steels and low-alloyed
170 steels, 22,1 .
10
-6

special electrode for chamfering

Mechanical properties Base metal AlMgSi 1
of all-weld-metal Material thickness (mm) 6
(typical values) Thermal treatment untreated
Test temperature [°C] +20°C
4. Filler metals for welding nickel,
0,2%-yield strengthnickel
Rp0,2 alloys
MPa and cast iron 90
Tensile strength Rm MPa 160
Elongation A5 [%] 15

Average chemical Al Si
composition Basis 5
5. Filler metals
of all-weld-metal (%)
for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Redrying 1h at +120°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
6. current,
welding Filler metals for welding copper and copper alloys
kg/1000 pcs.
unit weights 2,50 350 40 - 70 9,1 220 2,0
3,25 350 60 - 90 13,6 147 2,0
4,00 350 80 - 120 20,2 99 2,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

7. Flux-cored wires
Current/Polarity =+

8. Approvals

2.09
2.09
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-AlSi
Filler metals for welding stainless12 steels 3.2585
Filler metals for welding heat resistant,MIG/TIG
Aluminium-silicon-alloyed non-scaling and highly
wire for welding AlSi-alloys.
corrosion-proof steels
Standard designation Material No. 3.2585
Filler metals for joint welding austenitic/ferritic steels ER 4047
AWS/ASME SFA-5.10
EN ISO 18273 S Al 4047A (AlSi12(A))

Main base metals Aluminium cast alloys containing 12 % Si max.

2. Filler metals for aluminium
e.g. G-AlSi 10welding
Mg(3.2381), G-AlSi 12 (3.2581)
Filler metals
Physical properties
for titanium welding
El. conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansion coefficient
[S . m/mm2] [W/(m . K)] (20 - 100°C)
[1/K]
. -6
17 - 27 150 - 170 20 10
3. Filler metals for welding mild steels and low-alloyed steels,
special
Mechanical electrode forGas
properties chamfering
shield I1
of all-weld-metal Thermal treatment untreated
(typical values) Test temperature [°C] +20°C
0,2%-yield strength Rp0,2 MPa 100
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and cast iron 200
Elongation A5 [%] 5

Average chemical Al Si Mn
composition Basis 11,0-13,0 0,05
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
hotnotes
Application work as well as Preheat
high speed steels.
to +150°C Cobalt
any larger base
work piece alloysthicker than 15 mm.
or sections

Gas types applicable TIG I1

Gas types applicable MIG I1

6. Filler
Approvals metals for welding
DB, CE copper and copper alloys

TIG rod diameters available, Diameter Length kgs

[mm] [mm] per box
unit weights 1,60 1000 10,0
2,00 1000 10,0
7. Flux-cored wires 2,40
3,20
1000
1000
10,0
10,0
4,00 1000 10,0
5,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

8. Approvals
Welding positions MIG acc.to EN ISO 6947 PA, PB
Welding positions TIG acc.to EN ISO 6947 PA, PB

Current/Polarity TIG ~
Current/Polarity MIG =+

2.10
2.10
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-AlSi
Filler metals for welding stainless12 steels 3.2585
Filler metals for welding heat resistant,
Special-coated electrode for non-scaling and
welding aluminium highly
silicon cast alloys.
corrosion-proof steels
2
Weld metal: Aluminium silicon alloy.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 3.2585
AWS/ASME SFA-5.3 E 4047

Main base metals Aluminium cast alloys containing 12 % Si max.

2. Filler metals for aluminium
e.g. G-AlSi 10welding
Mg(3.2381), G-AlSi 12 (3.2581)

PhysicalFiller metals for titanium

properties welding
El. conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansion coefficient
[S . m/mm2] [W/(m . K)] (20 - 100°C)
[1/K]
. -6
17 - 27 150 - 170 20 10
3. Filler metals for welding mild steels and low-alloyed steels,
special
Mechanical electrode forThermal
properties chamfering
treatment untreated
of all-weld-metal Test temperature [°C] +20°C
(typical values) 0,2%-yield strength Rp0,2 MPa 100
Tensile strength Rm MPa 200
4. Filler metals for welding nickel, nickel alloys and cast iron
Elongation A5 [%] 5

Average chemical Al Si Mn
composition Basis 12 0,2
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
Redryinghot work as well as 1h at +120°C.
high speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit6.weights
Filler metals for welding
2,50copper
350and copper
40 - 70 alloys
9,0 222 2,0
3,25 350 60 - 90 13,3 150 2,0
4,00 350 80 - 120 20,1 100 2,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity
7. Flux-cored wires =+

8. Approvals

2.11
2.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding ER Tisteels 1
Filler metals for welding
TIG/MIGheat resistant,
welding non-scaling
wire for welding and highly
pure titanium.
corrosion-proof steels
Standard designation AWS/ASME SFA-5.16 ERTi 1
Filler metals for joint welding austenitic/ferritic steels S Ti 0100
EN ISO 24034

Main base metals Titan Grade 1, Grade 2, Grade 3, Grade 4

2. Filler metals for aluminium welding

Mechanical properties Thermal treatment untreated
Filler metals
of all-weld-metal
for titanium welding
Test temperature [°C] +20°C
(typical values) 0,2%-yield strength Rp0,2 MPa 250
Tensile strength Rm MPa 320

3. Filler
Average metals for welding
chemical C mild steels
N and low-alloyed
Fe O steels, H Ti
special electrode for chamfering
composition 0,03 0,012 0,08 0,03-0,10 0,005 Rest
of all-weld-metal (%)

Gas types applicable TIG I1

Gas types applicable MIG I1
4. Filler metals for welding nickel, nickel alloys and cast iron
TIG rod diameters available, Diameter Length kgs
[mm] [mm] per box
unit weights 1,00 1000 1,0
1,60 1000 1,0
2,00 1000 1,0
5. Filler metals for hard surfacing
2,40
and repair welding
1000
on cold and 1,0
hot work as well as high speed
3,20 steels. Cobalt base
1000 alloys 1,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm

6. Filler
Welding metals
positions for welding
MIG acc.to copper PA,
EN ISO 6947 andPB,copper
PF, PC, alloys
PE, PF, PG
Welding positions TIG acc.to EN ISO 6947 PA, PB

Current/Polarity WIG =-
Current/Polarity MIG =+
7. Flux-cored wires

8. Approvals

2.12
2.12
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding ER Tisteels 2 3.7035
Filler metals for welding
TIG/MIGheat resistant,
welding non-scaling
wire for welding and highly
pure titanium.
corrosion-proof steels
Standard designation AWS/ASME SFA-5.16
Filler metals for joint welding austenitic/ferritic steels
Material No.
ER Ti 2
3.7035
2
EN ISO 24034 S Ti 0120

Main base metals Titan Grade 1, Grade 2, Grade 3, Grade 4

2. Filler metals for aluminium welding
Filler metals for titanium
Mechanical properties
welding
Thermal treatment untreated
of all-weld-metal Test temperature [°C] +20°C
(typical values) 0,2%-yield strength Rp0,2 MPa 295
Tensile strength Rm MPa 500
3. Filler metals for welding mild steels
Elongation A5 and low-alloyed
[%] steels, 42
special electrode for chamfering
Average chemical C N Fe O H Ti
composition 0,08 0,05 0,25 0,18 0,013 Rest
of all-weld-metal (%)
4. Filler metals for welding
I1
nickel, nickel alloys and cast iron
Gas types applicable TIG
Gas types applicable MIG I1

TIG rod diameters available, Diameter Length kgs

[mm] [mm] per box
unit weights 1,00 1000 1,0
5. Filler metals for hard surfacing
1,60
and repair welding
1000
on cold and 1,0
hot work as well as high speed
2,00 steels. Cobalt base
1000 alloys 1,0
2,40 1000 1,0
3,20 1000 1,0

6.welding
MIG Filler
wiremetals for welding
Diameter
copper and0,8mm
copper alloys1,0mm 1,2mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC, PE, PF, PG
Welding positions TIG acc.to EN ISO 6947 PA, PB

Current/Polarity TIG =-
7. Flux-cored
Current/Polarity MIG wires =+

8. Approvals

2.13
2.13
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding ER Tisteels 5 3.7165
Filler metals for welding
TIG/MIGheat resistant,
welding non-scaling
wire for welding and
high-strength highly
titanium.
corrosion-proof steels
Standard designation AWS/ASME SFA-5.16 ERTi 5
Filler metals for joint welding austenitic/ferritic steels
Material No. 3.7165
EN ISO 24034 S Ti 6402

Mechanical properties Thermal treatment untreated

2. Filler metals for aluminium
of all-weld-metal welding
Test temperature [°C] +20°C
Filler metals for titanium
(typical values) 0,2%-yieldwelding
strength Rp0,2 MPa 828
Tensile strength Rm MPa 895
Elongation A5 [%] 10

C
3. Filler
Average metals for welding
chemical mild Nsteels and
Fe O
low-alloyed H
steels, Al V
composition 0,05 0,03 0,22 0,12-0,20 0,015 5,5-6,7 3,5-4,5
special (%)
of all-weld-metal electrode for chamfering
Gas types applicable TIG I1
Gas types applicable MIG I1
4. Filler metals for welding nickel, nickel alloys and cast iron
TIG rod diameters available, Diameter Length kgs
[mm] [mm] per box
unit weights 1,00 1000 1,0
1,60 1000 1,0
2,00 1000 1,0
5. Filler metals for hard surfacing
and repair
2,40 welding
on cold and
1000 1,0
3,20 1000 1,0
hot work as well as high speed steels. Cobalt base alloys
MIG welding wire Diameter 0,8mm 1,0mm 1,2mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC, PE, PF, PG
6. Filler
Welding metals
positions for welding
TIG acc.to copper PA,
EN ISO 6947 andPBcopper alloys
Current/Polarity TIG =-
Current/Polarity MIG =+

7. Flux-cored wires

8. Approvals

2.14
2.14
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding ER Tisteels 7 3.7235
Filler metals for welding
TIG/MIGheat resistant,
welding non-scaling
wire for welding titanium. and highly
corrosion-proof steels
Standard designation AWS/ASME SFA-5.16
Filler metals for joint welding austenitic/ferritic steels
Material No.
ERTi 7
3.7235
2
EN ISO 24034 S Ti 2401

Main base metals Titan Grade 7, Grade 2 , Grade 16

2. Filler metals for aluminium welding
Filler
Mechanical metals for titanium
properties welding
Thermal treatment untreated
of all-weld-metal Test temperature [°C] +20°C
(typical values) 0,2%-yield strength Rp0,2 MPa 275
Tensile strength Rm MPa 400
Elongation A5 [%] 20
3. Filler metals for welding mild steels and low-alloyed steels,
Averagespecial
chemicalelectrode
for chamfering
C N Fe O H Pd
composition 0,03 0,015 0,12 0,08-0,16 0,008 0,12-0,25
of all-weld-metal (%)

Gas4.types
Filler metals
applicable TIGfor welding
I1 nickel, nickel alloys and cast iron
Gas types applicable MIG I1

TIG rod diameters available, Diameter Length kgs

[mm] [mm] per box
unit weights 1,00 1000 1,0
5. Filler metals for hard surfacing
1,60 and repair welding
1000 on cold and 1,0
2,00 1000 1,0
hot work as well as high speed
2,40 steels. Cobalt base
1000 alloys 1,0
3,20 1000 1,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm

6. Filler metals for welding copper and copper alloys
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC, PE, PF, PG
Welding positions TIG acc.to EN ISO 6947 PA, PB

Current/Polarity TIG =-
Current/Polarity MIG =+
7. Flux-cored wires

8. Approvals

2.15
2.15
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Magnesium steels
Filler metals for welding
Weldingheat
rod forresistant, non-scaling and highly
welding magnesium.
corrosion-proof steels
Standard designation AWS/ASME SFA-5.19 ~R AZ61 A
Filler metals for joint welding austenitic/ferritic steels
Main base metals AZ61A-F
B91

2. Filler
Mechanical metals for aluminium
properties welding
welding processes TIG
of all-weld-metal Test temperature [°C] +20°C
Filler
(typical values)
metals for titanium welding
0,2%-yield strength Rp0,2 MPa 180
Tensile strength Rm MPa 280
Elongation A5 [%] 6

3. Filler
Average metals for weldingAl mild steels
chemical Zn and low-alloyed
Mn steels,
Si Mg
special electrode for chamfering
composition 6,5 0,8 0,3 0,4 Rest
of all-weld-metal (%)

Gas types applicable TIG I1

4. Filler metals for welding nickel,

TIG rod diameters available, Diameter nickel alloys Length
and cast iron kgs
[mm] [mm] per box
unit weights 1,60 1000 1,0
2,00 1000 1,0
2,40 1000 1,0

5. Filler
Welding metals
positions for hard
TIG acc.to surfacing
EN ISO 6947 and repair
PA, PBwelding on cold and
hot work as well as high speed steels. Cobalt base alloys
Current/Polarity TIG =-

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

2.16

2.16
 METAL
METALTECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Weldingalloys
alloys -- Special
Specialalloys
alloys

1. and
Mild Filler metals
low forsteels
alloyed welding stainless steels 3
Filler metals for welding heat resistant,
Filler metals for welding mild steels non-scaling
and low-alloyed steels,and highly
corrosion-proof steels
special electrode for chamfering
Filler metals for joint welding austenitic/ferritic steels

MTC-Name Material No. AWS Page

MIG MT-SG 2 Ti -
2. Filler metals for aluminium welding ER 70 S-2 3.01
TIG MT-WSG 2 1.5125 ER 70 S-6 3.02
Elektr.
Filler metals for titanium -welding
MT-RC 3 E 6013 3.03
Elektr.
Elektr.
MT-RC 3 blau
MT-RR 6
-
-
E 6013
E 6013
3.04
3.05 3
Elektr. MT-RR
3. Filler metals for6welding
gelb -
mild steels andE 6013
low-alloyed steels, 3.06
Elektr.special electrode
MT-RR Bfor7 chamfering
- E 6013 3.07
Elektr. MT-B 10 - E 7018 3.08
Elektr. MT-BR 10 - E 7016 3.09
Elektr. MT-RR 11 - E 7024 3.10
4. Filler metals
Elektr. MT-RRforCwelding
6 nickel,
- nickel Ealloys
6013 and cast iron 3.11
Elektr. MT-NiCu 1 b - E 7018-G 3.12
MIG MT-NiCu 1 - ~ER 80 S-Ni 1 3.13
MIG MT-NiMo - ER 90 S-G 3.14
MIG MT-NiMoCr - ER 100 S-1 3.15
5. Filler metals
MIG for hard
MT-NiMoCr 90surfacing
- and repair
ER 120welding
S-G on cold and
3.16
Elektr.hot workMT-NiMoCr
as well as high
90 speed
- steels. Cobalt base alloys
E 11018-G 3.17
MIG MT-NiMoCr 96 - ~ER 120 S-G 3.18
Elektr. MT-B 70 - E 7018-G 3.19
MIG/TIG MT-Mo/MT-5424 1.5424 ER 80 S-G 3.20
6. Filler metals
Elektr. MT-Mo for welding 1.5424
copper and copper
E 7018 alloys
A-1 3.21
MIG/TIG MT-CrMo 1 1.7339 ER 80 S-G 3.22
Elektr. MT-CrMo 1 1.7339 E 8018-B2 3.23
MIG/TIG MT-CrMo 2 1.7384 ER 90 S-G 3.24
Elektr. MT-CrMo 2 1.7384 E 9018-B3 3.25
7. Flux-cored
Elektr. wires
MT-Fug - - 3.26
Gas MT-G I 1.0324 ~R 45 3.27
Gas MT-G II 1.0494 ~R 60 3.28
Gas MT-G III 1.6215 ~R 60 3.29
Gas MT-G IV 1.5425 ~R 60 3.30
Gas
8. Approvals MT-G V 1.7346 ~R 65 3.31
MIG/TIG MT-2,5 Ni - ER 80 S-Ni 2 3.32

1.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-SG
Filler metals for welding stainless2 Ti vb
steels
Filler metals for welding heat
Low-alloy MIG resistant, non-scaling
wire for welding andsteels.
mild and low-alloy highly
Well fitting for
corrosion-proof steels
welding-over primers and protective zinc coatings. Non-ageing welding
deposit, suitable for working temperatures from –10°C up to +450°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14341-A G 42 3 M21 2 Ti
AWS/ASME SFA-5.18 ~ER 70 S-2

2. base
Main Filler metals
metals for aluminium welding
S 185, S 235JRG2, S235S, S235J2G3, P245GH, GS 38, P265GH, C22.3,
P265S, P235TR1, P235TR2, P265TR1, GS45, P215NL, P255QL, P265NL,
Filler metals for titanium
P265TR2,welding
L210GA, P235GH, P195GH, P250GH, C22.8, S275JR,P275SL
L245MB, C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH,
P280GH, L290MB, P295GH, L290NB,
S355NL, P355N, P355NL1, S355J2G3
X42, P305GH, P355GH, S355N,
L360MB, L360NB, 3
3. Filler
Mechanical metals for welding
properties mild steels and low-alloyedM steels,
Gas shield 21 M 21
special
of all – weld electrode forThermal
– metal chamfering
treatment untreated untreated
Test temperature [°C] +20°C 0°C
(typical values) Yielding point ReH [MPa >420
Tensile strength Rm MPa 500-640
Elongation A5 [%] >20
4. Filler metals for welding nickel,
Impact strength nickel
AV alloys
[J] and cast
LNBiron LNB

Average chemical C Si Mn Al Ti+Zr

composition 0,04 0,4-0,8 0,9-1,40 0,05-0,20 0,05-0,25
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
Gas types applicable M20, M21
hot work as well as high speed steels. Cobalt base alloys
Approvals DB, CE

Diameters available (MIG) Diameter 0,8mm 1,0mm 1,2mm

6. Filler
Welding metals
positions for welding
MIG acc.to copper PA,
EN ISO 6947 andPB,copper
PD, PE,alloys
PF, PG, PC
Current/Polarity MIG =+

7. Flux-cored wires

8. Approvals

3.01
3.01
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-WSG
Filler metals for welding 2
stainless steels
Filler metals for welding
TIG-rod heat resistant,
for welding mild andnon-scaling
low-alloy steels.and highly
Suitable for working
corrosion-proof steels
temperatures from –50°C up to +450°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 1.5125
EN ISO 636-A W 46 5 W3Si1
AWS/ASME SFA-5.18 ER 70 S-6

2. base
Main Filler metals
metals for aluminium welding
S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
Filler metals for titanium welding
P265TR2, L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
L245MB, C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH,
P280GH, L290MB, P295GH, L290NB, X42, P305GH, P355GH, S355N,
S355NL, P355N, P355NL1, S355J2G3 L360MB, L360NB,
3. Filler metals for welding
Mechanical properties
mild steels and low-alloyedI1steels,
Gas shield I1
special
of all – weld electrode
– metal forThermal
chamfering
treatment untreated untreated
Test temperature [°C] +20°C -50°C
(typical values) Yielding point ReH MPa >420
Tensile strength Rm MPa 500-600
Elongation A5 [%] >20
4. Filler metals for welding nickel,
Impact strength
nickel
AV
alloys
[J]
and cast
LNB
iron >47

Average chemical C Si Mn
composition 0,06-0,14 0,7-1,0 1,3-1,6
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as I1
Gas types available
high speed steels. Cobalt base alloys
Approvals TÜV, DB, CE

TIG rod diameters available, Diameter Length kgs

6. Filler metals for welding copper
[mm] and copper alloys
[mm] per box
unit weights 1,00 1000 25,0
1,20 1000 25,0
1,60 1000 25,0
2,00 1000 25,0
2,40 1000 25,0
3,00 1000 25,0
7. Flux-cored wires
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG =-

8. Approvals

3.02
3.02
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-RC
Filler metals for welding stainless 3 steels
Filler metals for welding heat resistant,
Medium-thickly non-scaling
rutile-cellulose andweldable
coated electrode, highlyin all positions,
corrosion-proof steels
especially designed for stich, assembly and vertical down position
welding. Weld-metal suitable for temperatures of 0° up to +450°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 2560-A E 38 0 RC 11
AWS/ASME SFA-5.1 E 6013

2. base
Main Filler metals
metals for aluminium welding
S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
Filler metals for titanium
P265TR2,welding
L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
L245MB, C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH

Mechanical properties
of all
Thermal treatment
Test temperature [°C] +20°C
untreated untreated
0°C
3
3. – weld – metal
Filler metals
for welding mild steels
Yielding point ReH
and low-alloyed
MPa
steels,
>380
(typical values)
special electrode forTensile
chamfering
strength Rm MPa >470-600
Elongation A5 [%] >20
Impact strength AV [J] LNB >47

4. Filler
Average metals
chemical for welding nickel,
C nickel alloys andSi cast iron Mn
composition 0,08 0,25 0,6
of all-weld-metal (%)

Redrying 1h at +120°C.

5. Filler metals for hard

Approvals TÜV,surfacing
DB, CE and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,00 300 40-60 10,0 400 4,0
6. Filler metals for welding
2,50copper
350and copper
60-100 alloys
17,6 250 4,4
3,25 350 100-140 30,3 165 5,0
4,00 350 110-170 44,0 100 4,4
5,00 450 150-210 92,3 65 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF, PG
7. Flux-cored wires
Current/Polarity =-

8. Approvals

3.03
3.03
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-RC
Filler metals for welding stainless 3 blau
steels
Filler metals for welding heat resistant,
Medium-thickly non-scaling
rutile-cellulose andweldable
coated electrode, highlyin all positions,
corrosion-proof steels
especially designed for stich, assembly and vertical down position
welding. Weld-metal suitable for temperatures of –10 up to +450°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 2560-A E 42 0 RC 11
AWS/ASME SFA-5.1 E 6013

2. base
Main Filler metals
metals for aluminium welding
S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
Filler metals for titanium
P265TR2,welding
L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
L245MB, C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH

Mechanical properties Thermal treatment untreated untreated

of all Test temperature [°C] +20°C 0°C
3. – weld – metal
Filler metals
for welding mild steels
Yielding point ReH
and low-alloyed
MPa
steels,
>380
(typical values)
special electrode forTensile
chamfering
strength Rm MPa >470-600
Elongation A5 [%] >20
Impact strength AV [J] >47

4. Filler
Average metals
chemical for welding nickel,
C nickel alloys andSi cast iron Mn
composition 0,08 0,25 0,6
of all-weld-metal (%)

Redrying 1-2h at +90°C.

5. Filler metals for hard

Approvals TÜV,surfacing
DB, CE and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,00 300 55-65 10,5 380 4,0
6. Filler metals for welding
2,50copper
350and copper
60-85 alloys
16,2 227 4,4
3,25 350 90-135 32,4 136 4,4
4,00 350 130-170 48,9 90 4,4
5,00 450 175-220 98,2 55 5,4

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

7. Flux-cored wires
Current/Polarity = -/~

8. Approvals

3.04
3.04
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-RR
Filler metals for welding stainless6 steels
Filler metals for welding heat resistant,
Heavily rutile-coated non-scaling
electrode and highly
producing exceptionally fine-scaled
corrosion-proof steels
seams. Working temperatures: 0°C to +450°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 2560-A steels E 42 0 RR 12
AWS/ASME SFA-5.1 E 6013

Main base metals S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
2. Filler metals for aluminium welding
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
P265TR2, L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
Filler metals for titanium
L245MB, welding
C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH

Mechanical properties
of all – weld – metal
Thermal treatment
Test temperature [°C]
untreated
+20°C
untreated
0°C 3
3. values)
(typical Filler metals for welding
Yielding mild
point steels
ReHand low-alloyed
MPa steels,
>420
Tensile strength Rm MPa 500-640
special electrode forElongation
chamfering A5 [%] >20
Impact strength AV [J] LNB >47

Average chemical C Si Mn
4. Filler metals
composition for welding nickel,
0,08 nickel alloys and
0,4cast iron 0,5
of all-weld-metal (%)

Redrying 2h at +140°C.

Approvals TÜV, DB, CE

5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high
Diameters, speedLength
Diameter steels. Cobalt
Current base alloys Pieces
Average Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 1,60 250 30-50 6,2 552 3,4
2,00 300 50-70 11,6 345 4,0
6. Filler metals for welding
2,50copper
350and copper
65-90 alloys
20,5 215 4,4
3,25 350 100-140 34,8 115 4,0
3,25 450 100-140 45,5 110 5,0
4,00 350 140-180 53,0 83 4,4
4,00 450 140-180 72,0 75 5,4
5,00 450 190-240 108,0 50 5,4
7. Flux-cored wires 6,00 450 240-290 158,8 34 5,4

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity = -/~
8. Approvals

3.05
3.05
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-RR
Filler metals for welding stainless6 gelb
steels
Filler metals for welding heat resistant,
Heavily rutile-coated non-scaling
electrode and highly
producing exceptionally fine-scaled
corrosion-proof steels
seams. Working temperatures: 0°C to +450°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 2560-A steels E 42 0 RR 12
AWS/ASME SFA-5.1 E 6013

Main base metals S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
2. Filler metals for aluminium welding
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
P265TR2, L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
Filler metals for titanium
L245MB, welding
C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH

Mechanical properties Thermal treatment untreated untreated

of all – weld – metal Test temperature [°C] +20°C 0°C
3. values)
(typical Filler metals for welding
Yielding mild
point steels
ReHand low-alloyed
MPa steels,
>420
Tensile strength Rm MPa 500-640
special electrode forElongation
chamfering A5 [%] >20
Impact strength AV [J] LNB >47

Average chemical C Si Mn
4. Filler metals
composition for welding nickel,
0,08 nickel alloys and
0,4cast iron 0,5
of all-weld-metal (%)

Redrying 2h at +140°C.

Approvals DB, CE
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high
Diameters, speedLength
Diameter steels. Cobalt
Current base alloys Pieces
Average Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,00 300 45-75 11,8 338 4,0
2,50 350 60-100 21,0 210 4,4
6. Filler metals for welding
3,25copper
350and copper
90-140 alloys
35,1 114 4,0
4,00 350 150-190 47,3 93 4,4
5,00 450 170-210 105,9 51 5,4

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

7. Flux-cored
Current/Polarity wires = -/~

8. Approvals

3.06 3.06
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-RR
Filler metals for welding stainlessB steels
7
Filler metals for welding heat resistant,electrode,
Heavily rutile-basic-coated non-scaling and
especially highly for welding
appropriate
corrosion-proof steels
root runs on pipes. Weld-metal suitable for working temperatures from
–20°C up to +450°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 2560-A E 38 2 RB 12
AWS/ASME SFA-5.1 E 60 13

2. base
Main Filler metals
metals for aluminium welding
S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
Filler metals for titanium
P265TR2,welding
L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
L245MB, C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH

Mechanical properties
of all
Thermal treatment untreated 3
3. – weld – metal
Filler metals Test temperature
for welding mild steels
Yielding point ReH
[°C] +20°C
and low-alloyed
MPa >380
steels, 0°C -20°C
(typical values)
special electrode forTensile
chamfering
strength Rm MPa 470-600
Elongation A5 [%] >20
Impact strength AV [J] LNB >47

4. Filler
Average metals
chemical for welding nickel,
C nickel alloys andSi cast iron Mn
composition 0,08 0,3 0,6
of all-weld-metal (%)

Redrying 2h at +140°C.

5. Filler metals for hard

Approvals TÜV,surfacing
DB, CE and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,50 350 70 - 100 19,1 230 4,4
6. Filler metals for welding
3,25copper
350and copper
110 - 140 alloys
33,6 131 4,4
4,00 350 140 - 180 47,3 93 4,4

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF, PD, PE

Current/Polarity = -/~
7. Flux-cored wires

8. Approvals

3.07
3.07
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding B 10 steels
Filler metals for welding heatelectrode
Basic-coated resistant, non-scaling
for welding and highly
mild and low-alloy steels. Controlled
corrosion-proof steels
hydrogen absorption and increased tenacity of weld-metal, suitable for
working temperatures –40°C up to +450°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation AWS/ASME SFA-5.1 E 7018
EN ISO 2560-A E 42 4 B 32 H5

2. base
Main Filler metals
metals for aluminium welding
S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
Filler metals for titanium
P265TR2,welding
L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
L245MB, C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH,
P280GH, L290MB, P295GH, L290NB, X42, P305GH, P355GH, S355N,
S355NL, P355N, P355NL1, S355J2G3 L360MB, L360NB,

3. Filler
Mechanical metals for welding
properties Thermalmild steels and low-alloyed steels,
treatment untreated
special
of all – weld electrode forTest
– metal chamfering
temperature [°C] +20°C -20°C -60°C
(typical values) Yielding point ReH MPa >420
Tensile strength Rm MPa 500-640
Elongation A5 [%] >20
4. Filler metals for welding nickel, nickel alloys and cast iron
Impact strength AV [J] >47

Average chemical C Si Mn
composition 0,06 0,4 1,2
of all-weld-metal (%)

5. Filler
Redrying metals for hard surfacing
1 h at +400°C. and repair welding on cold and
hot work as well as TÜV,
highDB, speed
CE
steels. Cobalt base alloys
Approvals

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
6. Filler metals for welding copper and copper alloys kg/1000 pcs.
unit weights 2,50 350 80 - 110 22,9 175 4,0
3,25 350 110 - 140 35,7 112 4,0
3,25 450 110 - 140 49,1 110 5,4
4,00 350 110 - 140 51,9 77 4,0
4,00 450 160 - 190 67,5 80 5,4
5,00 450 190 - 260 103,8 52 5,4
7. Flux-cored wires 6,00 450 200 - 290 150,0 36 5,4

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF, PD, PE

Current/Polarity
8. Approvals = -/~

3.08
3.08
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding BR 10 steels
Filler metals for welding heat resistant,
A basic-double non-scaling
coated electrode and
providing good highlyin
weldability
corrosion-proof steels
constrained positions. Controlled hydrogen content in the welding
deposit, suitable for working temperatures from –40°C up to +450°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN SIO 2560-A E 42 4 B 12 H 10
AWS/ASME SFA-5.1 E 7016
Main base metals S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
2. Filler metals for aluminium welding
P265S, P235TR1, P235TR2, 265TR1,
P265TR2, L210GA, P235GH, 195GH,
GS45, P215NL, P255QL, P265NL,
P250GH, C22.8, S275JR,P275SL
Filler metals for titanium
L245MB, welding
C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH,
P280GH, L290MB, P295GH, L290NB, X42, P305GH, P355GH, S355N,

Mechanical properties
S355NL, P355N, P355NL1, S355J2G3

Thermal treatment
L360MB, L360NB,

untreated
3
3. – weld
of all Filler metals for welding
– metal mild steels and low-alloyed
Test temperature [°C] +20°Csteels,-20°C -40°C
special electrode forYielding
(typical values) chamfering
point ReH MPa >420
Tensile strength Rm MPa 500-640
Elongation A5 [%] >20
Impact strength AV [J] >47
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn
composition 0,06 0,5 1,2
of all-weld-metal (%)

Redrying 1 h at +380°C.
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as TÜV,
Approvals highDB,
speed
CE
steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit6.weights
Filler metals for welding
2,00copper
300and copper
55 - 65 alloys
10,8 315 3,4
2,50 350 50 - 85 19,5 205 4,0
3,25 350 85 - 135 32,8 122 4,0
3,25 450 85 - 135 41,7 120 5,0
4,00 350 135 - 190 50,0 80 4,0
4,00 450 135 - 190 66,7 75 5,0
5,00 450 190 - 260 100,0 50 5,0
7. Flux-cored wires
Welding positions acc.to EN ISO 6947 PA, PB, PC, PF, PD, PE, PG

Current/Polarity = +/~

8. Approvals

3.09
3.09
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding RR 11 steels
Filler metals for welding heathigh-performance
Rutile coated resistant, non-scaling and150%
electrode giving highly
recovery.
corrosion-proof steels
Weld-metal suitable for working temperatures from 0°C up to +350°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 2560-A steels E 35 0 RR 53
AWS/ASME SFA-5.1 E 7024

Main base metals S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
2. Filler metals for aluminium welding
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
P265TR2, L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
Filler metals for titanium
L245MB, welding
C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH

Mechanical properties Thermal treatment untreated untreated

of all – weld – metal Test temperature [°C] +20°C 0°C
3. values)
(typical Filler metals for welding
Yielding mild
point steels
ReHand low-alloyed
MPa steels,
>380
Tensile strength Rm MPa 470-600
special electrode forElongation
chamfering A5 [%] >20
Impact strength AV [J] >47

Average chemical C Si Mn
4. Filler metals
composition for welding nickel,
0,07 nickel alloys and
0,4cast iron 0,9
of all-weld-metal (%)

Redrying 1h at +250°C.

Approvals TÜV, CE
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high
Diameters, speedLength
Diameter steels. Cobalt
Current base alloys Pieces
Average Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 3,25 450 130 - 170 71,2 73 5,2
4,00 450 160 - 230 110,2 49 5,4
6. Filler metals for welding
5,00copper
450and copper
240 - 330 alloys
174,2 31 5,4

Welding positions acc.to EN ISO 6947 PA, PB

Current/Polarity = -/~
7. Flux-cored wires

8. Approvals

3.10

3.10
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding RR Csteels 6
Filler metals for welding heat resistant,
Thickly rutile-cellulose non-scaling
coated and highly
electrode for universal use extremely easy
corrosion-proof steels
to weld, also in vertical down position. Welding deposit suitable for
working temperatures from 0°C up to +450°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 2560-A E 42 0 RC 11
AWS/ASME SFA-5.1 E 6013

2. base
Main Filler metals
metals for aluminium welding
S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
Filler metals for titanium
P265TR2,welding
L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
L245MB, C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH

Mechanical properties
of all
Thermal treatment
Test temperature [°C] +20°C
untreated untreated
0°C
3
3. – weld – metal
Filler metals
for welding mild steels
Yielding point ReH
and low-alloyed
MPa
steels,
>420
(typical values)
special electrode forTensile
chamfering
strength Rm MPa 550-640
Elongation A5 [%] >20
Impact strength AV [J] >47

4. Filler
Average metals
chemical for welding nickel,
C nickel alloys andSi cast iron Mn
composition 0,07 0,40 0,5
of all-weld-metal (%)

Redrying 1h at +140°C.

5. Filler metals for hard

Approvals TÜV,surfacing
DB, CE and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,00 300 30-50 10,8 370 4,0
6. Filler metals for welding
2,50copper
350and copper
55 - 85 alloys
19,8 222 4,4
3,25 350 90 - 135 33,9 118 4,0
4,00 350 130 - 170 51,9 77 4,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity
7. Flux-cored wires = -/~

8. Approvals

3.11

3.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT -stainless
Filler metals for welding NiCusteels 1b
Filler metals for welding heat resistant,steel
Copper-nickel-containing non-scaling and highly
electrode for welding weatherproof steels
corrosion-proof steels
and cold-tough fine grain structural steels. Weld metal suitable for
working temperatures from –45°C up to +300°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 2560-A E 46 4 Z B 42 H 5
AWS/ASME SFA-5.5 E 8018 - G

2. base
Main Filler metals
metals for aluminium welding
S235J2W to S355J2G1W, Corten A, B, C
Filler metals for titanium welding
Mechanical properties Thermal treatment untreated untreated
of all – weld – metal Test temperature [°C] +20°C -60°C
Yielding point ReH MPa 460
Tensile strength Rm MPa 540
3. Filler metals for welding mild
Elongation
steels
A5
and low-alloyed
[%] 20
steels,
special electrode forImpact
chamfering
strength AV [J] >47

Average chemical C Si Mn Cu Ni
composition 0,06 0,5 1,0 0,4 0,7
4. Filler metals
of all-weld-metal (%) for welding nickel, nickel alloys and cast iron
Redrying 1h at +400°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
5. Filler metals for hard surfacing and repair welding on cold and kg/1000 pcs.
unit weights 2,50 300 65 - 90 18,1 188 3,4
hot work as well as high3,25
speed steels.
350
Cobalt
110- 140
base alloys
36,4 110 4,0
4,00 450 140 - 180 67,5 80 5,4

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF, PE, PD
6. Filler metals for welding copper and copper alloys
Current/Polarity =+

7. Flux-cored wires

8. Approvals

3.12
3.12
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-NiCu
Filler metals for welding stainless 1 steels
Filler metals for welding heat resistant,steel
Copper-nickel-containing non-scaling and highly
MIG-wire for welding weatherproof steels
corrosion-proof steels
and cold-tough fine grain structural steels. Weld metal suitable for
working temperatures from –46°C up to +300°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation AWS/ASME SFA-5.28 ~ ER 80 S-Ni 1
EN ISO 14341-A G/W 50 4 M Z

2. base
Main Filler metals
metals for aluminium welding Corten A, B, C
S235J2W to S355J2G1W,

Filler metals
Mechanical properties
for titanium welding
Gas shield M 21 M 21

3
of all – weld – metal Thermal treatment untreated untreated
Test temperature [°C] +20°C -30°C
(typical values) Yielding point ReH MPa >500
3. Filler metals for welding mild steels
Tensile strength Rmand low-alloyed
MPa steels,
560-720
special electrode forElongation
chamfering AA5
Impact strength
[%]
[J]
>18
>47
V

Average chemical C Si Mn Cu Ni
composition 0,08 0,8 1,4 0,4 0,8
4. Filler metals
of all-weld-metal (%)
for welding nickel, nickel alloys and cast iron

Approvals TÜV, DB, CE

Gas types applicable TIG I1

Gas5.types M 21
Filler metals
applicable MIGfor
hard surfacing and repair welding on cold and
hot workavailable,
TIG rod diameters as well as high speed
Diametersteels. Cobalt base
Length alloys kgs
[mm] [mm] per box
unit weights 1,60 1000 25,0
2,00 1000 25,0
2,40 1000 25,0
6. Filler metals for welding copper
3,20 and copper alloys
1000 25,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC, PG
Welding positions TIG acc.to EN ISO 6947 PA, PB, PF, PC, PG
7. Flux-cored wires
Current/Polarity TIG =-
Current/Polarity MIG =+

8. Approvals

3.13
3.13
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. NiMo
Filler metals for welding stainless steels
Filler metals for welding heat
Low-alloy steelresistant,
MIG wire for non-scaling
welding quenched and
and highly
subsequently drawn
corrosion-proof steels
fine-grained structural steels. Weld metal suitable for working
temperatures from –30°C up to +350°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation AWS/ASME SFA-5.28 ER 90 S-G
EN ISO 16834-A G 62 6 M21 Mn3Ni1Mo
EN ISO 16834-A G 62 6 C1 Mn3Ni1Mo
2. Filler metals for aluminium welding
Main base metals S420N-S500N, P420NH-P500NH, S420NL-S500NL
Filler metals for titanium welding
Mechanical properties Gas shield M 21 M 21
of all – weld – metal Thermal treatment untreated untreated
Test temperature [°C] +20°C -30°C -60°C
3. values)
(typical Filler metals for welding
Yielding mild
point steels
ReHand low-alloyed
MPa >620 steels,
special electrode forTensile
chamfering
strength Rm MPa 700-890
Elongation A5 [%] >18
Impact strength AV [J] >47

Average chemical C Si Mn Ni Mo
4. Filler metals
composition
for welding nickel, nickel
0,12 0,4-0,8 alloys1,3-1,9
and cast iron
0,8-1,3 0,25-0,65
of all-weld-metal (%)

Gas types applicable MIG C1, M 20, M 21

5. Filler
Approvals metals for hard surfacing and repair welding on cold and
DB, CE

hot work
MIG welding wire as well as high speed steels.
Diameter Cobalt base
0,8 mm 1,0 mmalloys1,2 mm 1,6 mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PC, PD, PE, PF, PG

Filler metals for welding copper =and

Current/Polarity MIG
6. + copper alloys

7. Flux-cored wires

8. Approvals

3.14
3.14
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. NiMoCr
Filler metals for welding stainless steels
Filler metals for welding heat
Low-alloy resistant,
MIG/TIG non-scaling
wire for welding quenchedand highly
and subsequently drawn
corrosion-proof steels
fine-grained structural steels. Weld metal suitable for working
temperatures from –40°C up to +350°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation AWS/ASME SFA-5.28 ER 100 S-1
EN ISO 16834-A G 69 4 M Mn3Ni1CrMo

2. base
Main Filler metals
metals for aluminium welding
S690QL1, S700MC, S420N-S500N, P420NH-P500NH, S420NL-S500NL

Filler metals
Mechanical properties
for titanium welding
Gas shield M 21 M 21

3
of all – weld – metal Thermal treatment untreated untreated
Test temperature [°C] +20°C -30°C -40°C
(typical values) Yielding point ReH MPa >690
3. Filler metals for welding mild steels
Tensile strength Rmand low-alloyed
MPa 770-940 steels,
special electrode forElongation
chamfering
Impact strength
A5
AV
[%]
[J]
>17
>47

Average chemical C Si Mn Ni Mo Cr
composition 0,12 0,4-0,7 1,3-1,8 1,2-1,6 0,2-0,3 0,2-0,4
4. Filler metals
of all-weld-metal (%)
for welding nickel, nickel alloys and cast iron

Gas types applicable TIG I1

Gas types applicable MIG M 21

TÜV, DB, CE
5. Filler
Approvals MIG metals for hard surfacing and repair welding on cold and
hot work as well
TIG rod diameters available, as high speed
Diametersteels. Cobalt base
Length alloys kgs
[mm] [mm] per box
unit weights 1,60 1000 25,0
2,00 1000 25,0
2,40 1000 25,0
6. Filler metals for welding copper
3,20
and copper alloys
1000 25,0

MIG welding wire Diameter 0,8 mm 1,0 mm 1,2 mm 1,6 mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PC, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF
7. Flux-cored wires
Current/Polarity TIG =-
Current/Polarity MIG =+

8. Approvals

3.15
3.15
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding NiMoCr steels90
Filler metals for welding heat
Low-alloy steelresistant,
MIG wire fornon-scaling
welding quenched andandhighly
subsequently drawn
corrosion-proof steels
high-tensile steels. Weld-metal suitable for working temperatures from
-30°C up to +450°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation AWS/ASME SFA-5.28 ER 120 S-G
EN ISO 16834-A G 89 6 M Mn4Ni2CrMo

2. base
Main Filler metals
metals for aluminium
S 890Q welding
Filler metals for titanium welding
Mechanical properties Gas shield M 21
of all – weld – metal Thermal treatment untreated untreated
(typical values) Test temperature [°C] +20°C -60°C
3. Filler metals for welding
Yielding mild
point steels
ReHand low-alloyed
MPa] >890steels,
special electrode forTensile
chamfering
strength Rm MPa 940-1180
Elongation A5 [%] > 15
Impact strength AV [J] 130 > 47

Average chemical C Si Mn Ni Mo Cr V
4. Filler metals
composition
for welding
0,12 nickel, nickel1,6-2,1
0,6-0,9 alloys 1,8-2,3
and cast iron
0,45-0,7 0,2-0,45 0,03
of all-weld-metal (%)

Gas types applicable MIG M 20, M 21

5. Filler
Approvals metals for hard surfacing and repair welding on cold and
DB, CE

hot work
MIG welding wire as well as high speed steels.
Diameter Cobalt 1,0
0,8 mm basemm alloys
1,2 mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PD, PE, PF, PG

6. Filler metals
Current/Polarity MIG for welding copper =and
+ copper alloys

7. Flux-cored wires

8. Approvals

3.16
3.16
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding NiMoCr steels90
Filler metals for welding heatelectrode
Basic-coated resistant, non-scaling
for welding quenchedand highly drawn
and subsequently
corrosion-proof steels
fine-grained high-tensile structural steels. Nickel-manganese-chrome
welding deposit with controlled hydrogen absoption, suitable for working
Filler metals for joint weldingfrom
temperatures austenitic/ferritic
–60°C up to +450°C. steels

Standard designation EN ISO 18275-A E 69 6 Mn2NiCrMo B 42 H 5

AWS/ASME SFA-5.5 E 11018 – G
2. Filler metals for aluminium welding
Main base metals S 690
Filler metals for titanium welding

3
Mechanical properties Thermal treatment untreated untreated
of all – weld – metal Test temperature [°C] +20°C -60°C
(typical values) Yielding point ReH MPa 690
3. Filler metals for welding mild steels
Tensile strength Rmand low-alloyed
MPa steels,
810-960
special electrode forElongation
chamfering A5 [%] 16
Impact strength AV [J] 120 >40

Average chemical C Si Mn Ni Cr Mo
0,05
composition
4. Filler metals for welding nickel, 0,4 1,8
nickel alloys 2,2
and cast iron 0,4 0,45
of all-weld-metal (%)

Redrying 1 h at +400°C

Diameters, Diameter Length Current Average Pieces Kg per box

5. Filler
welding current,metals
for hard surfacing
[mm]
and repair
[mm] [A]
welding
kg/1000 on
pcs. cold and
weight per box

hot work as well as high

unit weights speed steels.
2,50 350 Cobalt
70 - 100 base 17,8
alloys 224 4,0
3,25 350 100- 130 31,3 128 4,0
4,00 350 130 - 170 63,5 85 5,4
5,00 450 170 - 210 100,0 54 5,4
6. Filler metals for welding copper and copper alloys
Welding positions acc.to EN ISO 6947 PA, PB, PF, PE, PD

Current/Polarity =+

7. Flux-cored wires

8. Approvals

3.17
3.17
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding NiMoCr steels96
Filler metals for welding heat resistant, non-scaling and highly
Low-alloyed steel MIG wire for welding quenched and subsequently
corrosion-proof steels
drawn high tensile steels. Weld metal suitable for working temperatures
Filler metals for joint welding
from austenitic/ferritic
-40°C up to +350°C. steels
Standard designation AWS/ASME SFA-5.28 ~ ER 120 S-G
DIN EN ISO 16834-A G 89 4 M21 Mn4Ni2,5CrMo
2. Filler metals for aluminium welding
Main base metals S890Q, S960Q
Filler metals for titanium welding

Mechanical properties of all- Gas shield M21

weld-metal Thermal treatment untreated
3. Filler metals for
(typical values)
welding mild steels and low-alloyed
Test temperature [°C]
steels,
+20°C -40°C
special electrode forYielding
chamfering
point ReH MPa 930
Tensile strength Rm MPa 940-1180
Elongation A5 [%] 14
Impact strength AV [J] 80 40
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical composition C Si Mn Ni Mo Cr
of all-weld-metal 0,12 0,8 1,9 2,35 0,55 0,45
(typical values)

Gas5.types
Filler metals
applicable MIGfor
hard surfacingMand
20, Mrepair
21 welding on cold and
hot work as well as high speed steels. Cobalt base alloys
MIG welding wire Diameter 0,8 mm 1,0 mm 1,2 mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PD, PE, PF, PG
6. Filler metals for welding copper and copper alloys
Current/Polarity =+

7. Flux-cored wires

8. Approvals

3.18
3.18
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-B
Filler metals for welding 70 steels
stainless
Filler metals for welding heatelectrode
Basic coated resistant, non-scaling
for welding andsteels
high-strength highly
and steels
corrosion-proof steels
difficult to weld. Welding deposit of manganese containing steel suitable
for working temperatures from –40°C up to +450°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 2560-A E 42 4 B 42 H5
AWS/ASME SFA-5.5 E 7018-G

2. base
Main Filler metals
metals for aluminium welding
The welding deposit is extremely insensitive to cold and hot cracking, thus
suitable for welding steels with high carbon content (up to abt. 0.60 %) High
Filler metals for titanium welding
impact strength at low temperatures 120% recovery. Suitable for joining rail
steels. Easily weldable in all positions, little loss due to spatter formation. Well-
covering slag, easy to remove.
St 50, St 60, St 70; St 55, St 55.4; GS-52, GS-60;
H III, H IV; 17 Mn 4, 19 Mn 5; Rail steels; C 25, C 35, C 45
3
3. Filler metals for welding mild steels and low-alloyed steels,
special
Mechanical electrode forThermal
properties chamfering
treatment untreated
of all – weld – metal Test temperature [°C] +20°C -20°C -40°C
(typical values) Yielding point ReH MPa 490
Tensile strength Rm MPa 600
Elongation A5 [%]
4. Filler metals for welding nickel,
Impact strength
nickel
AV
alloys
[J]
and25130
- 30
cast iron 70 40

Average chemical C Si Mn
composition 0,06 max. 0,5 1,40
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
Redrying
hot work as well as 2high
h at +350°C.
speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit6.weights
Filler metals for welding
2,50
copper and copper
350 65-95
alloys
22,7 220 5,0
3,25 350 90-140 40,0 125 5,0
3,25 450 90-140 46,2 130 6,0
4,00 450 140-185 70,6 85 6,0
5,00 450 180-240 109,1 55 6,0
6,00 450 250-330 166,7 36 6,0

7. Flux-cored wires
Welding positions acc.to EN ISO 6947 PA, PB, PF, PE, PD

Current/Polarity =+

8. Approvals

3.19
3.19
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Mo
Filler metals for welding stainless / MT-5424
steels 1.5424
Filler metals for welding heat
Low-alloy resistant, non-scaling
molybdenum-containing andwire
steel MIG/TIG highly
for welding heat
corrosion-proof steels
resisting steels, suitable for working temperatures of up to +500°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 1.5424
AWS/ASME SFA-5.28 ER 80 S-G
EN ISO 14341-A G42 4 C/M G 2Mo
EN ISO 21952-A G/W Mo Si
2. Filler metals for aluminium EN
welding
ISO 636-A W 46 4 W2Mo
Filler metals for titanium welding
Main base metals P235G1TH-P255G1TH, P235GH-P310GH, 16Mo3, L320, L360NB-L415NB

Mechanical properties Weldind process TIG MIG

of all – weld – metal Gas shield I1 M21
3. Filler metals
(typical values)
for welding mild steels and low-alloyed
Test temperature [°C] +20°C steels,
-40°C +20°C -40°C
special electrode for0,2%-yield
chamfering
strength Rp0,2 MPa >460 >420
Tensile strength Rm MPa 530-680 500-600
Elongation A5 [%] >20 >20
Impact strength AV [J] >47 >47
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn Mo
composition 0,08-0,12 0,3-0,7 0,9-1,3 0,4-0,6
of all-weld-metal (%)

Gas types applicable TIG I1

Gas5.types
Filler metals
applicable MIGfor
hard
M 21surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Approvals TIG (MT-5424) TÜV, DB, CE
Approvals MIG TÜV, DB, CE

TIG rod diameters available, Diameter Length kgs

6. Filler metals for welding copper
[mm] and copper alloys
[mm] per box
unit weights 1,60 1000 25,0
2,00 1000 25,0
2,40 1000 25,0
3,20 1000 25,0

MIG Diameter 0,8 mm 1,0 mm 1,2 mm 1,6 mm

7.welding wire
Flux-cored wires
Welding positions MIG acc.to EN ISO 6947 PA, PB, PC, PF, PG
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG =-
Current/Polarity MIG
8. Approvals =+

3.20
3.20
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Mo steels 1.5424
Filler metals for welding heatelectrode
Basic coated resistant, non-scaling
for welding andsteels.
heat resistant highly
Weld metal of
corrosion-proof steels
molybdenum-containing steel suitable for working temperatures of up to
+550°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 2560-A E 42 2 Mo B 42
AWS/ASME SFA-5.5 E 7018 - A 1
EN ISO 3580-A E Mo B 42
2. Filler metals for aluminium welding
Main base metals P235G1TH-P255G1TH, P235GH-P310GH, 16Mo3, L320, L360NB-L415NB
Filler metals for titanium welding
Mechanical properties
3
Thermal treatment tempered
of all – weld – metal Test temperature [°C] +20°C
(typical values) 0,2%-yield strength Rp0,2 MPa >420
3. Filler metals for welding mild steels
Tensile strength Rmand low-alloyed
MPa steels,
500-640
special electrode forElongation
chamfering A5 [%] >20
Impact strength AV [J]

Average chemical C Si Mn Mo
4. Filler metals
composition for welding 0,1
nickel, nickel 0,8
alloys and cast iron
0,4-1,5 0,4-0,7
of all-weld-metal (%)

Redrying 1h at +400°C

Approvals TÜV, CE
5. Filler metals for hard surfacing and repair welding on cold and
Diameters, Diameter
hot work as well as high speedLength
steels. Current
Cobalt baseAverage Pieces
alloys per Kg per box
[mm] [mm] [A] weight box
welding current,
kg/1000 pcs.
unit weights 2,50 350 80 - 110 21,5 205 4,4
3,25 350 110- 140 35,7 112 4,0
6. Filler metals for welding
4,00copper
450and copper
150 - 190 alloys67,5 80 5,4
5,00 450 190 - 230 105,9 51 5,4

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF, PG

Current/Polarity =+
7. Flux-cored wires

8. Approvals

3.21
3.21
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Cromo steels1 1.7339
Filler metals for welding heat
Low-alloy resistant,
MIG/TIG non-scaling
wire of chrome molybdenum and highly
steel for welding heat and
corrosion-proof steels
hydrogen resisting steels, suitable for working temperatures of up to
+570° C°.
Filler metals for joint welding austenitic/ferritic steels
Standard designation Material No. 1.7339
EN ISO 21952-A G/W CrMo1Si
AWS/ASME SFA-5.28 ER 80 S-G
2. Filler metals for aluminium welding
Main base metals 1.7335 13 CrMo 4 4 1.7218 GS - 25 CrMo 4
Filler metals for titanium
1.7357
welding
GS - 17 CrMo 5 5 1.7350 22 CrMo 4 4
1.7337 16 CrMo 4 4 1.7354 GS - 22 CrMo 5 4
1.7218 25 CrMo 4 1.7225 42 CrMo 4

3. Filler
Mechanical metals for welding
properties Weldingmild steels
process and low-alloyedTIG
steels, MIG
special
of all – weld electrode forGas
– metal chamfering
shield
Thermal treatment
I1
tempered
M 11
tempered
(typical values)
Test temperature [°C] +20°C +550°C +20°C +550°C
0,2%-yield strength Rp0,2 MPa >355 >355
Tensile strength Rm MPa >510 >510
4. Filler metals for welding nickel, nickel
Elongation A5 alloys
[%] and>20
cast iron >20
Impact strength AV [J] >47 >47

Average chemical C Si Mn Cr Mo
composition 0,08-0,14 0,5-0,8 0,8-1,2 0,9-1,3 0,4-0,65
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
hot
Gas types work as
applicable well
TIG as I1
high speed steels. Cobalt base alloys
Gas types applicable MIG C1, M 11-M 33

Approvals TIG TÜV, CE

TÜV, DB, CE
6. Filler
Approvals MIG metals for welding copper and copper alloys
TIG rod diameters, Diameter Length Kg per box
unit weights [mm] [mm] [kg]
1,60 1000 25,0
2,00 1000 25,0
2,40 1000 25,0
7. Flux-cored wires 3,20 1000 25,0

MIG welding wire Diameter 0,8 mm 1,0 mm 1,2 mm 1,6 mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PC, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PD, PE, PF
8. Approvals
Current/Polarity TIG =-
Current/Polarity MIG =+

3.22
3.22
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Cromo steels1 1.7339
Filler metals for welding heatelectrode
Basic coated resistant, non-scaling
for welding and highly
heat and hydrogen resisting steels.
corrosion-proof steels
Weld metal of chrome-molybdenum-containing steel, suitable for working
temperatures of up to +570°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 3580-A E CrMo 1 B 42
AWS/ASME SFA-5.5 E 8018 - B 2

2. base
Main Filler metals
metals for aluminium
1.7335 welding
13 CrMo 4 4 1.7350 22 CrMo 4 4
1.7357 GS - 17 CrMo 5 5 1.7354 GS - 22 CrMo 5 4
Filler metals for titanium
1.7337
welding
16 CrMo 4 4 1.7225 42 CrMo 4

3
1.7218 25 CrMo 4 1.0407 LSt 45.8
1.7218 GS -25 CrMo 4 1.0569 LStE 36

3. Filler
Mechanical metals for welding mild steels and low-alloyed steels,
properties
of all – weld electrode forTest
– metal
special temperature
chamfering
0,2%-yield strength Rp0,2
[°C]
MPa
+20°C
>355
+550°C
(typical values)
Tensile strength Rm MPa >510
Elongation A5 [%] >20
Impact strength AV [J] >47
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn Cr Mo
composition 0,05-0,12 0,8 0,4-1,5 0,9-1,4 0,45-0,7
of all-weld-metal (%)

5. Filler
Redrying metals for hard1h atsurfacing
+400°C. and repair welding on cold and
hot
Approvals work as well as high speed
TÜV, DB, CE steels. Cobalt base alloys

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
6. Filler metals for welding
unit weights 2,50copper
350and copper
80 - 110 alloys
21,5 205 4,4
3,25 350 100 - 140 35,7 112 4,0
4,00 350 150 - 190 53,3 75 4,0
5,00 450 190 - 260 105,9 51 5,4

Welding positions acc.to EN ISO 6947 PA, PB, PC, PD, PE, PF
7. Flux-cored wires
Current/Polarity =+

8. Approvals

3.23
3.23
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Cromo steels2 1.7384
Filler metals for welding
MIG/TIGheat
wire ofresistant, non-scaling and highlysteel for
low-alloy chrome-molybdenum-containing
corrosion-proof steels
welding heat resistant steels, suitable for working temperatures of
up to +600°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 21952-A G/W CrMo 2 Si
Material No. 1.7384
AWS/ASME SFA-5.28 ER 90 S-G
2. Filler metals for aluminium welding
Main base metals 1.7380 10 CrMo 9 10 1.7273 24 CrMo 10
Filler metals for titanium
1.7380
welding
GS - 12 CrMo 9 10 1.7276 10 CrMo 11
1.8075 10 CrSiMo V 7 1.7281 16 CrMo 9 3
1.7259 26 CrMo 7

3. Filler
Mechanical metals for welding
properties Weldingmild steels
process and low-alloyedTIG
steels, MIG
special
of all – weld electrode forGas
– metal chamfering
shield
Thermal treatment
I1
½ h 750°C/air
M11
½ h 750°C/air
(typical values) Test temperature [°C] +20°C +20°C
Yielding point ReH MPa 460 460
Tensile strength Rm MPa 640 640
4. Filler metals for welding nickel, nickel
Elongation A5 alloys
[%] and cast22iron 22
Impact strength AV [J] 140 140

Average chemical C Si Mn Cr Mo
composition 0,07 0,7 1,1 2,45 1
5. Filler metals
of all-weld-metal (%) for hard surfacing and repair welding on cold and
hot work as well
Gas types applicable TIG as I1
high speed steels. Cobalt base alloys
Gas types applicable MIG M 11, M 21, M 23, M 32

TIG rod diameters available, Diameter Length kgs

6. Filler metals for welding copper
unit weights
[mm]
1,60
and copper alloys
[mm]
1000
per box
25,0
2,00 1000 25,0
2,40 1000 25,0
3,20 1000 25,0

MIG welding wire Diameter 0,8 mm 1,0 mm 1,2 mm

7. Flux-cored wires
Welding positions MIG acc.to EN ISO 6947 PA, PB, PC, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PD, PE, PF

Current/Polarity TIG =-
Current/Polarity MIG =+
8. Approvals

3.24
3.24
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Cromo steels2
Filler metals for welding heatelectrode
Basic coated resistant, non-scaling
for welding and highly
heat and compressed hydrogen
corrosion-proof steels
resistant steels. Chrome molybdenum containing welding deposit,
suitable for working temperatures of up to +600°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 2560-A E CrMo 2 B 42 H5
AWS/ASME SFA-5.5 E 9018 - B 3

2. base
Main Filler metals
metals for aluminium
1.7380 welding
10 CrMo 9 10 1.7273 24 CrMo 10
1.7380 GS - 12 CrMo 9 10 1.7276 10 CrMo 11
Filler metals for titanium
1.8075
welding
10 CrSiMo V 7 1.7281 16 CrMo 9 3

3
1.7259 26 CrMo 7

Mechanical properties Thermal treatment tempered tempered

3. – weld
of all Filler metals
– metal for welding mild steels and low-alloyed steels,
½ h 750°C/air ½ h 750°C/air
Test temperature [°C] +20°C +600°C
special
(typical values)
electrode for chamfering
0,2%-yield strength Rp0,2 MPa
Yielding point ReH MPa 510 300
Tensile strength Rm MPa 600 380
Elongation A5 [%] 24 22
4. Filler metals for welding nickel,
Impact strength nickel
AV alloys
[J] and cast
100iron

Average chemical C Si Mn Cr Mo
composition 0,07 0,4 0,8 2,4 1,1
of all-weld-metal (%)
5.
Redrying
Filler metals for hard surfacing and repair welding on cold and
1h at +400°C.
hot work as well as high speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,50 350 80 - 110 20,5 220 4,5
6. Filler metals for welding
3,25copper
350and copper
110- 140 alloys
37,0 135 5,0
4,00 350 150 - 190 50,5 99 5,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity =+
7. Flux-cored wires

8. Approvals

3.25
3.25
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Fug steels
Filler metals for welding
Gougingheat resistant,
and cutting non-scaling and highly
electrode
corrosion-proof steels
Main fields of application Suitable for chamfering metals of nearly every kind, preparing seems and
Filler metals for joint welding
removing defect austenitic/ferritic
welds, for gouging, piercingsteels
holes and separating mild steels
and alloyed steels, cast steels as well as aluminium and copper alloys.

User notes Chamfering and separating work can be done in all welding positions exept
vertical up. During welding, a clearance angle of abt. 15% between the
2. Filler metals for aluminium
elektrode andwelding
the work piece should be observed. For separating work, move
Filler metals for titanium welding
the elektrode like a saw.
The elektrode will draw a very high amount of current (high arc voltage), which
requires sufficiently efficient source of current. The welding current has to be
set higher than the actually metered current value. As this difference depends
on the equipment used the below-mentioned reference values can only be
used.
3. Filler metals for welding mild steels and low-alloyed steels,
special
Diameters, electrode for chamfering
Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,50 350 100-160 19,7 178 3,5
3,25 350 130-200 33,0 106 3,5
4. Filler metals for welding
4,00nickel,350
nickel180-250
alloys and 50,7
cast iron 69 3,5
5,00 350 250-350 77,8 45 3,5

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

Filler metals for hard surfacing =and

Current/Polarity
5. +/~repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

3.26
3.26
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-GI
Filler metals for welding stainless steels 1.0324
Filler metals for welding heat
Low-alloy fillerresistant, non-scaling
rod for gas welding andwelding
on mild steels highlydeposit
corrosion-proof steels
suitable for working temperatures of up to +350°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 12536 steels OI
Material No. 1.0324
AWS/ASME SFA-5.2 ~R 45

2. base
Main Filler metals
metals for aluminium welding
S235JR, S235JO, S235G2T, S255GT, P235GH, P265GH
Filler metals for titanium welding
Mechanical properties Thermal treatment untreated

3
of all – weld – metal Test temperature [°C] +20°
(typical values) Yielding point ReH MPa >260
Tensile strength Rm MPa >360
3. Filler metals for welding mild steels
Elongation A5 and low-alloyed
[%] steels,>20
special electrode forImpact
chamfering
strength AV [J] >30

Average chemical C Si Mn
composition 0,08 0,1 0,5
4. Filler metals
of all-weld-metal (%) for welding nickel, nickel alloys and cast iron
Rod diameters, Diameter Length Kg per box
unit weights [mm] [mm]
1,00 1000 25,0
1,60 1000 25,0
5. Filler metals for hard surfacing
2,00 and repair welding
1000 on cold and25,0
hot work as well as high speed
2,40 steels. Cobalt base
1000 alloys 25,0
3,20 1000 25,0
4,00 1000 25,0
5,00 1000 25,0
6,00 1000 25,0
6. Filler metals for welding copper and copper alloys
Welding positions acc.to DIN EN ISO 6947 PA, PE, PC, PF

7. Flux-cored wires

8. Approvals

3.27
3.27
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-GII
Filler metals for welding stainless steels
Filler metals for welding heat
Low-alloy fillerresistant, non-scaling
rod for gas welding andwelding
on mild steels highly deposit
corrosion-proof steels
suitable for working temperatures of up to +350°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 12536 steels OII
Material No. 1.0494
AWS/ASME SFA-5.2 ~R 60

2. base
Main Filler metals
metals for aluminium welding
S235G2T, S255GT, S235JO, S275JO, P235G1TH, P255G1TH,
P235GH, P265GH, P285NH
Filler metals for titanium welding
Mechanical properties Thermal treatment untreated
of all – weld – metal Test temperature [°C] +20°
(typical values) Yielding point ReH MPa 300
3. Filler metals for welding mild steels
Tensile strength Rm and low-alloyed
MPa steels,>400
special electrode forElongation
chamfering A5 [%] >20
Impact strength AV [J] >47

Average chemical C Si Mn
composition 0,10 0,08 1,0
4. Filler metals for welding nickel, nickel alloys and cast iron
of all-weld-metals

Rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
2,00 1000 25,0
5. Filler metals for hard surfacing
2,40 and repair welding
1000 on cold and25,0
3,20 1000 25,0
hot work as well as high speed
4,00 steels. Cobalt base
1000 alloys 25,0
5,00 1000 25,0

Welding positions acc.to EN ISO 6947 PA, PE, PC, PF

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

3.28
3.28
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-G
Filler metals for welding III steels
stainless 1.6215
Filler metals for welding heat
Nickel steel resistant,
filler rod for gas non-scaling
welding on mild and
steelshighly
and low-alloy steels.
corrosion-proof steels
Welding deposit suitable for working temperatures from 0°C to +350°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 1.6215
AWS/ASME SFA-5.2 ~R 60
EN ISO 12536 O III

2. base
Main Filler metals
metals for aluminium welding
S235G2T, S255GT, S235JO, S275JO, P235G1TH, P255G1TH, P235GH,
P265GH, P285NH, P295GH
Filler metals for titanium welding
Mechanical properties
3
Thermal treatment untreated
of all – weld – metal Test temperature [°C] +20°
(typical values) Yielding point ReH MPa >310
3. Filler metals for welding mild steels
Tensile strength Rm and low-alloyed
MPa steels,>400
special electrode forElongation
chamfering A5 [%] >22
Impact strength AV [J] >47

Average chemical C Si Mn Ni
4. Filler metals
composition for welding0,05
nickel, nickel 0,05
alloys and cast iron
0,95-1,25 0,35-0,80
of all-weld-metals

Approvals TÜV, CE

Rod diameters, Diameter Length Kg per box

unit5.weights
Filler
metals for hard surfacing
[mm] and repair welding
[mm] on cold and
hot work as well as high speed
1,60 steels. Cobalt base
1000 alloys 25,0
2,00 1000 25,0
2,40 1000 25,0
3,20 1000 25,0
4,00 1000 25,0
6. Filler metals for welding copper
5,00 and copper alloys
1000 25,0

Welding positions acc.to EN ISO 6947 PA, PE, PC, PF

7. Flux-cored wires

8. Approvals

3.29
3.29
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-G
Filler metals for welding IV steels
stainless 1.5425
Filler metals for welding heat
Low-alloy resistant,
moly-steel non-scaling
filler rod for gas weldingand highly
on heat resisting steels.
corrosion-proof steels
Welding deposit suitable for working temperatures of up to +450°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 1.5425
AWS/ASME SFA-5.2 ~R 60
EN ISO 12536 O IV

2. base
Main Filler metals
metals for aluminium welding
S235G2T, S355GT, S235JR, S275JO, P355T2, P235GH, P265GH,
P285NH, P295GH, 15Mo3, 16Mo3
Filler metals for titanium welding
Mechanical properties Thermal treatment untreated
of all – weld – metal Test temperature [°C] +20°
(typical values) Yielding point R eH MPa >260
3. Filler metals for welding mild steels
Tensile strength Rm and low-alloyed
MPa steels,>440
special electrode forElongation
chamfering A5 [%] >22
Impact strength AV [J] >60

Average chemical C Si Mn Mo
composition
4. Filler metals for welding0,13
nickel, nickel 0,15
alloys and cast 1iron 0,5
of all-weld-metals

Rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
2,00 1000 25,0
5. Filler metals for hard surfacing
2,40 and repair welding
1000 on cold and25,0
3,20 1000 25,0
hot work as well as high speed
4,00
steels. Cobalt base
1000
alloys 25,0

Welding positions acc.to EN ISO 6947 PA, PE, PC, PF

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

3.30
3.30
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-G
Filler metals for welding V steels
stainless 1.7346
Filler metals for welding heat
Low-alloy resistant, non-scaling
chrome-molybdenum-steel filler rodand highly
for gas welding on heat
corrosion-proof steels
resisting steels. For working temperatures of up to +550°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 12536 steels OV
AWS/ASME SFA-5.2 ~R 65
Material No. 1.7346

2. base
Main Filler metals
metals for aluminium welding
P295GH, 16Mo3, 13CrMo4-5
Filler metals for titanium welding
Mechanical properties Thermal treatment untreated

3
of all – weld – metal Test temperature [°C] +20°
(typical values) Yielding point R eH MPa >320
Tensile strength Rm MPa >510
3. Filler metals for welding mild steels
Elongation A5 and low-alloyed
[%] steels,>20
special electrode forImpact
chamfering
strength AV [J] >70

Average chemical C Si Mn Mo Cr
composition 0,12 0,15 1 0,5 1
4. Filler metals
of all-weld-metals for welding nickel, nickel alloys and cast iron
Rod diameters, Diameter Length Kg per box
unit weights [mm] [mm]
2,00 1000 25,0
2,40 1000 25,0
5. Filler metals for hard surfacing
3,20 and repair welding
1000 on cold and25,0
hot work as well as high speed
4,00 steels. Cobalt base
1000 alloys 25,0

Welding positions acc.to EN ISO 6947 PA, PE, PC, PF

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

3.31
3.31
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-2,5
Filler metals for welding stainlessNisteels
Filler metals for welding
MIG/TIGheat resistant,
wire for welding finenon-scaling
grain steels andand highly
low alloyed low
corrosion-proof steels
temperature steel. For working temperatures -60°C.

StandardFiller metals for joint welding

designation EN ISOaustenitic/ferritic
14341-A steelsG 46 6 M21 2 Ni 2
AWS/ASME SFA-5.28 ER 80 S-Ni 2

Main base metals S255N-S380N, 14Ni6, 12Ni14, S255NL

2. Filler metals for aluminium welding
Filler
Mechanical metals for titanium
properties welding
Gas shield
Thermal treatment
M 21
untreated
M 21
untreated
of all – weld – metal
Test temperature [°C] +20°C -60°C
Yielding point R eH MPa >460
Tensile strength Rm MPa 530-680
3. Filler metals for welding mild steels
Elongation A5 and low-alloyed
[%] steels,
>20
special electrode for chamfering
Impact strength AV [J] >47

Average chemical C Si Mn Ni
composition 0,03 0,4-0,8 0,8-1,4 2,1-2,7
of all-weld-metals
4. Filler metals for welding nickel, nickel alloys and cast iron
Gas types applicable TIG I1
Gas types applicable MIG M 21

Approvals TIG -
TÜV, DB, CE
5. Filler
Approvals MIG metals for hard surfacing and repair welding on cold and
hot work as well as high speed
TIG rod diameters, steels. Cobalt Length
Diameter base alloys Kg per box
unit weights [mm] [mm]
1,60 1000 25,0
2,00 1000 25,0
6. Filler metals for welding copper
2,40
3,20
and copper alloys
1000
1000
25,0
25,0

MIG welding wire Diameter 0,8 mm 1,0 mm 1,2 mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PC, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PD, PE, PF
7. Flux-cored wires
Current/Polarity TIG =-
Current/Polarity MIG =+

8. Approvals

3.32
3.32
 METAL
METALTECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Weldingalloys
alloys - - Special
Specialalloys
alloys

1. Filler
Nickel alloysmetals for welding stainless steels 4
Filler metals for welding heat resistant, non-scaling and highly
Filler corrosion-proof steels
metals for welding nickel, nickel alloys and cast iron
Filler metals for joint welding austenitic/ferritic steels
MTC-Name Material No. AWS Page
MIG/TIG MT-Nickel 2.4155 ER Ni-1 4.02
2. Filler metals
Elektr. for aluminium
MT-Nickel - welding E Ni-CI 4.03
MIG Filler metals for titanium
MT-NiFe - welding - 4.04
Elektr. MT-NiFe - E NiFe – CI 4.05
Elektr. MT-NiFe B - E NiFe – CI 4.06
MIG/TIG MT-82 2.4806 ER NiCr-3 4.07
3. Filler metals
Elektr. MT-182
for welding mild steels and
2.4807
low-alloyed steels,
E NiCrFe-3 4.08
Elektr.special MT-182
electrode
K for chamfering
2.4648 E NiCrFe-2 4.09
MIG/TIG MT-Nicro 625 2.4831 ER NiCrMo-3 4.10
Elektr. MT-Nicro 625 2.4621 E NiCrMo-3 4.11
MIG/TIG MT-Alloy
4. Filler metals forCwelding
2.4886 ERalloys
nickel, nickel NiCrMo-4 4.12
and cast iron
Elektr.
MIG/TIG
MT-Alloy C
MT-NiCu 30
2.4887
2.4377
ER NiCrMo-4
ER NiCu 7
4.13
4.14 4
MIG/TIG MT-4607 2.4607 ER NiCrMo 13 4.15

5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals
 METAL
METALTECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Weldingalloys
alloys - - Special
Specialalloys
alloys

Allocation base material – filler material

1. Filler metals for welding stainless steels
Filler
Material No. metals for welding heat resistant,
Kurzbezeichnung non-scaling
Filler metals MTC and Page
highly
2.4050 Ni 99,8 MT-Nickel 4.02 / 4.03
2.4060 corrosion-proof
Ni 99,6 steels MT-Nickel 4.02 / 4.03
2.4061 Filler metals for99,6
LC-Ni joint welding austenitic/ferritic
MT-Nickel steels 4.02 / 4.03
2.4062 Ni 99,4 Fe MT-Nickel 4.02 / 4.03
2.4066 Ni 99,2 MT-Nickel 4.02 / 4.03
2.4068 LC-Ni 99 MT-Nickel 4.02 / 4.03
2. Filler metals
2.4106 for1 aluminium welding
NiMn MT-Nickel 4.02 / 4.03
2.4108 NiMn 1 C MT-Nickel 4.02 / 4.03
2.4110 Filler metals for2 titanium weldingMT-Nickel
NiMn 4.02 / 4.03
2.4116 NiMn 5 MT-Nickel 4.02 / 4.03
2.4122 NiMn 3 Al MT-Nickel 4.02 / 4.03
2.4128 NiAl 4 Ti MT-Nickel 4.02 / 4.03
3. Filler metals
2.4360 for
NiCu 30welding
Fe mild steels and 30
MT-NiCu low-alloyed steels,
4.14
2.4374 NiCu 30 Al MT-NiCu 30 4.14
2.4375
special electrode for
NiCu 30 Al
chamfering MT-NiCu 30 4.14
2.4400 NiCu 14 Fe Mo MT-NiCu 30 4.14
2.4602 NiCr21Mo14W MT-4607 4.15
2.4605 NiCr23Mo16Al MT-4607 4.15
4. Filler metals
2.4610 for welding nickel, nickel
NiMo16Cr16Ti MT-4607alloys and cast iron
4.15
2.4618
2.4619
NiCr22Mo6Cu
NiCr22Mo7Cu
MT-Nicro 625
MT-Nicro 625
4.10 / 4.11
4.10 / 4.11
4
2.4630 NiCr20Ti MT-82 4.07 / 4.08
2.4631 NiCr20TiAl MT-82 4.07 / 4.08
2.4641 NiCr21Mo6Cu MT-Nicro 625 4.10 / 4.11
5.
2.4663 Filler metals for hard
NiCr23Co12Mo surfacing and repair
MT-Nicro 625welding on cold
4.10 /and
4.11
2.4816 hot work as well as high speed steels.
NiCr15Fe MT-82Cobalt base alloys 4.07 / 4.08
2.4817 LC-NiCr15Fe MT-82 4.07 / 4.08
2.4819 NiMo16Cr15W MT-Alloy C 4.12 / 4.13
2.4851 NiCr23Fe MT-82 4.07 / 4.08
2.4856
6. Filler metals NiCrfor
22 Mo 9 Nb copper and
welding MT-Nicro 625 alloys
copper 4.10 / 4.11
2.4858 NiCr 21 Mo MT-Nicro 625 4.10 / 4.11
2.4951 NiCr 20 MT-82 4.07 / 4.08

The information on our products contained in the table

Are based on careful examination.
7. assume
We Flux-cored wires for the correctness.
no liability
We ask the user to check our data and the products for their own use.

8. Approvals

4.01
4.01
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Nickel steels 2.4155
Filler metals for welding heat special
Nickel-based, resistant, non-scaling
low carbon and
MIG/TIG wire, highlypure nickel,
for welding
corrosion-proof steels
suitable for working temperatures of up to +350°C.

StandardFiller metals for joint weldingMaterial

designation austenitic/ferritic
No steels 2.4155
AWS/ASME SFA-5.14 ER Ni - 1
EN ISO 18274 S Ni 2061

2. fields
Main Filler metals for
of applicationaluminium welding
Nickel, low-alloy nickel (semifinished Ni-products/Ni-cast steels), e.g. LC-Ni
99,6 (2.4061), NiMn 5 (2.4116); G-Ni 95 (2.4170) as well as welded joints
Filler metals for titanium welding
between these materials and steel, cast-steel, copper; claddings and buffer
layers.

Mechanical properties Welding process TIG MIG

3. – weld
of all Filler metals
– metal for welding mild steels and low-alloyed
Gas shield
Thermal treatment
steels,
I1
untreated
I1
untreated
(typical values)
special electrode forTest
chamfering
temperature [°C] +20°C +20°C
0,2%-yield strength Rp0,2 MPa >200 >200
1,0% yield strength Rp1,0 MPa >380 >380
Elongation A5 [%] >30 >30
4. Filler metals for welding nickel, nickel
Impact strength AV alloys
[J] andLNB
cast iron LNB

Average chemical Ni C Fe Mn Si Ti
composition Basis 0,15 0,2 1,0 0,7 2-3,5
of all-weld-metals

Gas5.types
Filler metals
applicable TIGfor hard
I1 surfacing and repair welding on cold and
hot
Gas types work as
applicable well as I1
MIG high speed steels. Cobalt base alloys
Approvals TIG TÜV, CE
Approvals MIG TÜV, CE

TIG6.rod diameters,
Filler metals for welding Diameter
copper and copperLength
alloys Kg per box
unit weights [mm] [mm]
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0
7. Flux-cored wires
MIG welding wire Diameter 1,0 mm 1,2 mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG
8. Approvals =-
Current/Polarity MIG =+

4.02
4.02
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Nickel steels 2.4155
Filler metals for welding heat resistant,
Basic-graphitic non-scaling
coated electrode andcore
with pure nickel highly
for welding
corrosion-proof steels
dissimilar cast steels.

StandardFiller metals for joint welding

designation EN austenitic/ferritic
ISO 1071 steels E C Ni -CI 1
AWS/ASME SFA-5.15 E Ni - Cl

Main fields of application Cast steel with lamellar graphite acc. to DIN 1691, e.g. GG-10 (GJL-100) to
2. Filler metals for aluminium welding
GG-35 (GJL-350) all-white and all-black malleable cast iron acc. DIN 1692.

Filler
Mechanical metals for titanium
properties welding
Thermal treatment untreated
of all – weld – metal Test temperature [°C] +20°C
(typical values) 0,2% yield strength Rp0,2 MPa 210
Tensile strength Rm MPa 440
3. Filler metals for welding mild steelsA5 and low-alloyed
Elongation [%] steels, 5
special electrode forBrinell-hardness
chamfering HB 10/3000 160

Average chemical C* Fe Ni
composition 0,5 2,5 Basis
of all-weld-metals *) eliminated as graphite
4. Filler metals for welding nickel, nickel alloys and cast iron
Redrying 2h at +150°-+180°C. 4
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit5.weights
Filler
metals for hard surfacing
2,50 and repair
350 50 - 100welding
21,0on cold238
and 5,0
hot work as well as high speed steels.
3,25 350 Cobalt
70 - 130 base 33,5
alloys 149 5,0
4,00 350 90 - 150 49,5 101 5,0

Welding positions acc.to EN ISO 6947 PA, PE, PC, PE, PF

6. Filler metals for welding copper and copper alloys
Current/Polarity = -/~

7. Flux-cored wires

8. Approvals

4.03
4.03
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding NiFe steels
Filler metals for welding heat
Nickel iron resistant,
MIG/TIG welding non-scaling and highly
wire for joining dissimilar materials, i.e cast
corrosion-proof steels
iron to special graphite cast iron.

StandardFiller metals for joint welding

designation EN austenitic/ferritic
ISO 1071 steels G/W C NiFe-1
Main fields of Joining cast iron to special graphite cast iron according to
application DIN 1693, e.g. GGG-38 up to GGG-70
2. Filler metals for aluminium welding
Mechanical properties
Filler metals Welding process
for titanium welding TIG MIG
of all – weld – metal Gas shield I1 M 11
(typical values) Thermal treatment untreated untreated
Test temperature [°C] +20°C +20°C
0,2%-yield strength Rp0,2 MPa 350 350
3. Filler metals for welding mild
1,0% yield steels
strength and
Rp1,0 low-alloyed
MPa 450 steels, 450

special electrode forElongation

chamfering
Impact strength
A5
AV
[%]
[J]
16
LNB
16
LNB

Average chemical C Ni Fe Cu MN Si
composition 0,03 55 Rest 0,4 0,7 0,1
4. Filler metals
of all-weld-metal (%) for welding nickel, nickel alloys and cast iron
Approvals TIG -
Approvals MIG DB

Gas types applicable TIG I1

5. Filler metals for
Gas types applicable MIG
hard surfacing
M 11, M 12 and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
TIG rod diameters, Diameter Length Kg per box
unit weights [mm] [mm]
1,60 1000 10,0
2,00 1000 10,0
6. Filler metals for welding copper
2,40
and copper alloys
1000 10,0
3,20 1000 10,0

MIG welding wire Diameter 1,0 mm 1,2 mm

Welding positions MIG acc.to EN ISO 6947 PA, PB

7. Flux-cored
Welding positions TIG wires
acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG =-
Current/Polarity MIG =+

8. Approvals

4.04

4.04
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Nife steels
Filler metals for welding heat resistant,
Basic-graphitic non-scaling
coated electrode andcore
with nickel iron highly
for joining
corrosion-proof steels
dissimilar cast iron materials.

StandardFiller metals for joint welding

designation EN austenitic/ferritic
ISO 1071 steels E C NiFe 11
AWS/ASME SFA-5.15 E NiFe - Cl

Main fields of application Joining cast iron to special graphite cast iron according to DIN 1693, e.g. GGG-
2. Filler metals for aluminium
40(GJS-400) welding
up to GGG-80 (GJS-700) all-black malleable iron according to
DIN 1692, e.g. GTS-35-10 to GTS-70-02, shrink hole welding and surfacing on
Filler metals for titanium
cast iron. welding

Mechanical properties Thermal treatment untreated

of all – weld – metal Test temperature [°C] +20°C
3. values)
(typical Filler metals for welding
Yielding mild
point steels
ReHand low-alloyed
MPa steels, 250
Tensile strength Rm MPa 375
special electrode forElongation
chamfering A5 [%] 4
Brinell-hardness HB 10/3000 170

Average chemical C Fe Ni
4. Filler metals for welding nickel, nickel alloys and cast iron
4
composition 0,5 45 Basic
of all-weld-metal (%)

Redrying 2h at +150°-+180°C.

Diameters, Diameter Length Current Average Pieces Kg per box

5. Filler metals
welding current,
for hard surfacing
[mm] and repair
[mm] [A] welding on cold
weight perand
box
hot work as well as high speed
2,50
steels.
300
Cobalt
60 - 90
base alloys
kg/1000 pcs.
16,3 307 5,0
unit weights
3,25 350 90 - 130 31,2 160 5,0
4,00 350 120- 150 47,6 105 5,0

6. Filler
Welding metals
positions acc.to for welding
EN ISO 6947 copperPA,
andPB,copper alloys
PC, PE, PF

Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

4.05
4.05
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. Nifestainless
Filler metals for welding B steels
Filler metals for welding heat resistant,
Basic-graphitic non-scaling
coated electrode and
with bimetallic highly for
nickel-iron-core
corrosion-proof steels
welding dissimilar cast iron.

StandardFiller metals for joint welding

designation EN austenitic/ferritic
ISO 1071 steels E C NiFe 11
AWS/ASME SFA-5.15 E NiFe - Cl

Main fields of application Joining cast iron to nodular graphite cast iron according to DIN 1693, e.g.
2. Filler metals for aluminium welding
GGG-40(GJS-400) up to GGG-70(GJS-700 all-black malleable iron according
to DIN 1692, e.g. GTS-35-10 to GTS-70-02, Shrink hole welding and surfacing
Filler metals for titanium welding
on cast iron. Joining unalloyed steel to ductile cast iron.

Mechanical properties Thermal treatment untreated

of all – weld – metal Test temperature [°C] +20°C
3. values)
(typical Filler metals for welding mild
0,2% yield steels
strength and low-alloyed
Rp0,2 MPa steels, 350
Tensile strength Rm MPa 480
special electrode forElongation
chamfering A5 [%] 16
Brinell-hardness HB 10/3000 180

Average chemical C Fe Ni
4. Filler metals
composition for welding nickel,
0,5 nickel alloys and
45 cast iron 54
of all-weld-metal (%)

Redrying 2h at +150°-+180°C.

Diameters, Diameter Length Current Average Pieces Kg per box

5. Filler metals
welding current,
for hard surfacing
[mm] and repair
[mm] [A] welding on cold
weight perand
box
hot
unit weights
work as well as high speed
2,50
steels.
300
Cobalt
70 - 110
base alloys
kg/1000 pcs.
16,3 307 5,0
3,25 350 90 - 150 31,2 160 5,0
4,00 350 100 - 180 47,6 105 5,0

6. Filler
Welding metals
positions acc.to for welding
EN ISO 6947 copperPA,
andPB,copper alloys
PC, PE, PF

Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

4.06
4.06
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding 82 steels 2.4806
Filler metals for welding heat resistant,
Nickel chrome non-scaling
iron MIG/TIG wire and highly
for welding nickel alloys and cold-tough
corrosion-proof steels
nickel steels and for joining dissimilar steels, suitable for working
temperatures of up to +550°C; cold-tough down to –196°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 18274 S Ni 6082
Material No 2.4806
AWS/ASME SFA-5.14 ER NiCr - 3
2. Filler metals for aluminium welding
Main fields of application Nickel chrome alloys, e.g. NiCr 15 Fe (2.4816), NiCr 20 Ti (2.4951); heat-proof
Filler metals fortitanium
austeniticwelding
steels, e.g. X 10 NiCrAlTi 32 20 (1.4876); cold-tough nickel steels
e.g. X 8 Ni 9 (1.5662), 12 Ni 19 (1.5680), 10 Ni 14 (1.4637), and cold-tough
austenitic steels, e.g. X 2 CrNi 19 11 (1.4306), especially if subsequent thermal
treatment is required.
Joining austenitic to ferritic steels subjected to working temperatures exceeding
3. Filler metals for welding
+300°C. mild
Joining steels
dissimilarand low-alloyed
materials, steels,
e.g. copper to ferrous metals.
special electrode for chamfering
Mechanical properties Wlding process TIG and MIG
of all – weld – metal Gas shield I1
(typical values) Thermal treatment untreated
Test temperature [°C] +20°C +600°C -196°C +20°C
4. Filler metals for welding nickel, nickel alloys and>295
cast iron
0,2% yield strength Rp0,2
Tensile strength
Elongation
Rm
A5
MPa
MPa
[%]
>550
>30
4
Impact strength AV [J] LNB

5. Filler
Average metals for hardNisurfacing
chemical C andCr repair
Fewelding
Mn on cold
Nb andSi Ti
composition Basis 0,1 18,0-22,0 3,0 2,5-3,5 2,0-3,0 0,5 0,7
hot work as well as high speed steels. Cobalt base alloys
of all-weld-metal (%)

Gas types applicable TIG I1

Gas types applicable MIG I1
6. Filler metals for welding copper and copper alloys
Approvals TIG TÜV, CE
Approvals MIG TÜV, CE

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
7. Flux-cored wires 1,60
2,00
1000
1000
10,0
10,0
2,40 1000 10,0
3,20 1000 10,0

MIG welding wire Diameter 0,8 mm 1,0 mm 1,2 mm

8. Approvals
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity TIG =-
Current/Polarity MIG =+

4.07
4.07
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding 182 steels 2.4807
Filler metals for welding
Special heat resistant,
basic coated non-scaling
electrode and
with high nickel highly
content for joining
corrosion-proof steels
dissimilar materials. Corrosion and heat resistant, giving 140% recovery.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14172 steels E Ni 6182
Material No 2.4807
AWS/ASME SFA-5.11 E-NiCrFe - 3

2. fields
Main Filler metals for
of applicationaluminium
Welded jointswelding
between mild steel and highest alloy material, nickel and nickel
alloys, copper and copper alloys and between these groups of materials. High
Filler metals for titanium welding
corrosion and heat resistance in low-sulphur atmosphere. Non-scaling at
temperatures higher than +1200°C. Fully austenitic weld metal, insensitive to
brittlenes, thermal shock resistant and cold-tough. Even at elevated
temperatures no carbon diffusion into the weld metal.
Also suitable for repair and maintenance, especially for welded joints on
3. Filler metals for welding mildwithsteels
constructions andtension.
high inner low-alloyed steels,
special electrode for chamfering
Mechanical properties Thermal treatment untreated untreated
of all – weld – metal Test temperature [°C] +20°C -40°C
(typical values) 0,2% yield strength Rp0,2 MPa 380
0,1% yield strength Rp0,1 MPa 410
4. Filler metals for welding nickel, nickel
Tensile strength Rm
alloys
MPa
and cast
630
iron
Elongation A5 [%] 35
Impact strength AV [J] 80 82

Average chemical C Ni Cr Mn Fe Nb
5. Filler metals
composition for hard 0,06
surfacingRest
and repair welding
15,0-17,0 on cold
5,0-7,0 and
5,0-8,0 1,5-3,0
of all-weld-metal (%)
hot work as well as high speed steels. Cobalt base alloys
Redrying 1h at +200°C.

Diameters, Diameter Length Current Average Pieces Kg per box

6. current,
welding Filler metals for welding
[mm]copper and copper
[mm] [A] alloys
weight per box
kg/1000 pcs.
unit weights 2,50 350 60 - 90 28,1 178 5,0
3,25 350 90 - 120 47,5 105 5,0
4,00 350 110 - 150 71,9 70 5,0
5,00 450 130 - 180 144,5 42 6,0

7. Flux-cored
Welding wires
positions acc.to EN ISO 6947 PA, PB, PC, PD, PE, PF

Current/Polarity = +/~

8. Approvals

4.08
4.08
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding 182 Ksteels 2.4648
Filler metals for welding
Special heat resistant,
basic coated non-scaling
electrode and
with high nickel highly
content for joining
corrosion-proof steels
dissimilar materials. Corrosion and heat resistant.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14172 steels E Ni 6082
Material No. 2.4648
AWS/ASME SFA-5.11 ~E-NiCrFe - 2

2. fields
Main Filler metals for
of applicationaluminium
Welded jointswelding
between mild steel and highest alloy material, nickel and nickel
alloys, copper and copper alloys and between these groups of materials. High
Filler metals for titanium welding
corrosion and heat resistance in low-sulphur atmosphere. Non-scaling at
temperatures higher than +1200°C. Fully austeninitic weld metal, insensitive to
brittlenes, thermal shock resistant and cold-tough. Even at elevated
temperatures no carbon diffusion into the weld metal.
Also suitable for repair and maintenance, especially for welded joints on
3. Filler metals for welding mildwithsteels
constructions andtension.
high inner low-alloyed steels,
special electrode for chamfering
Mechanical properties Thermal treatment untreated untreated
of all – weld – metal Test temperature [°C] +20°C -40°C
(typical values) 0,2% yield strength Rp0,2 MPa 380
0,1% yield strength Rp0,1 MPa 420
4. Filler metals for welding nickel, nickel alloys and cast iron
Tensile strength
Elongation
Impact strength
Rm
A5
AV
MPa
[%]
[J]
700
42
80 96
4
Average chemical C Ni Cr Mn Fe Nb Mo
5. Filler metals
composition for hard0,05
surfacing
Restand repair
20,0 welding
3,0-5,0 on3,0cold and
2,0 1,0
of all-weld-metal (%)
hot work as well as high speed steels. Cobalt base alloys
Redrying 1h at +350°C.

Diameters, Diameter Length Current Average Pieces Kg per box

6. current,
welding Filler metals for welding
[mm]copper and copper
[mm] [A] alloys
weight per box
kg/1000 pcs.
unit weights 2,50 300 50 - 90 16,5 244 4,0
3,25 350 70 - 120 32,5 153 5,0
4,00 350 100 - 160 49,5 102 5,0
5,00 450 140 - 200 100,0 60 5,0

7. Flux-cored
Welding wires
positions acc.to EN ISO 6947 PA, PB, PC, PD, PE, PF

Current/Polarity =+

8. Approvals

4.09
4.09
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Nicro
Filler metals for welding 625
stainless steels 2.4831
Filler metals for welding heat resistant,
Nickel chrome non-scaling
molybdenum-steel MIG/WIG wireandfor highly
welding nickel alloys
corrosion-proof steels
and cold-tough nickel steels and for joining dissimilar steels; suitable for
working temperatures of up to +550°C, cold-tough down to –196°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 18274 S Ni 6625
Material.No. 2.4831
AWS/ASME SFA-5.14 ER NiCrMo - 3
2. Filler metals for aluminium welding
Main fields of application Nickel-chrom-molybdenum alloys, e.g. NiCr 22 Mo 9 Nb (2.4856); NiCr 22 Mo 6
Filler metals for
titanium welding
Cu (2.4618), NiCr 22 Mo 7 Cu (2.4619) and welded joints to mild steels, low
and high-alloy steels/cast steels; Claddings on cold-tough nickel steels, e.g. X
8 Ni 9 (1.5662); welded joints between austenitic and ferritic steels, suitable for
working temperatures exceeding +300°C.
3. Filler metals for welding
Mechanical properties
mild steels and low-alloyedTIG
Welding process
steels, MIG
special
of all – weld electrode
– metal forGas
chamfering
shield I1 I1
(typical values) Thermal treatment [°C] uneated untreated
Test temperature +20°C –196°C +20°C - 196°C
0,2% yield strength Rp0,2 MPa >295 >295
Tensile strength Rm MPa >760 >760
4. Filler metals for welding nickel, nickel
Elongation A5
alloys
[%]
and cast iron
>30 >30
Impact strength AV [J] LNB LNB

Average chemical Ni C Cr Fe Mn Mo Nb Si
composition Basis 0,1 20,0-23,0 5,0 0,5 9 8,0-10,0 0,5
5. Filler metals
of all-weld-metal (%) for hard surfacing and repair welding on cold and
hot work as well
Gas types applicable TIG
as I1
high speed steels. Cobalt base alloys
Gas types applicable MIG I1

Approvals TIG TÜV, CE

6. Filler
Approvals MIG metals for welding
TÜV, CE copper and copper alloys

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
7. Flux-cored wires 3,20 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PF
8. Approvals
Current/Polarity TIG =-
Current/Polarity MIG =+

4.10
4.10
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Nicro
Filler metals for welding 625
stainless steels 2.4621
Filler metals for welding heathigh-deposition
Rutile coated resistant, non-scaling and highly
electrode for welding nickel alloys and
corrosion-proof steels
cold-tough nickel steels and for joining dissimilar materials. Nickel
chrome molybdenum weld metal, suitable for working temperatures of up
Filler metals for joint welding
to +1000°C, austenitic/ferritic
cold-tough down to –196°C. steels

Standard designation EN ISO 14172 E Ni 6625

Material No. 2.4621
2. Filler metals for aluminium welding
AWS/ASME SFA-5.11 E NiCrMo - 3
EN ISO 14700 E Ni 2
Filler metals for titanium welding
Main fields of Nickel chrome molybdenum alloys, e.g. NiCr 22 Mo 9 Nb (2.4856), NiCr 22 Mo
application 6 Cu (2.4618), NiCr 22 Mo 7 Cu (2.4619), and welded joints between these
materials and mild steels, low and high-alloy steels/cast steels:
3. Filler metals for welding
Claddingsmild steels nickel-steels,
on cold-tough and low-alloyed
e.g. X 8 Ni steels,
9 (1.5662),
Welded joints between austenitic and ferritic steels, suitable for working
special electrode fortemperatures
chamfering higher than +300°C.

Mechanical properties Thermal treatment untreated untreated

of all-weld-metal Test temperature (°C) +20°C -196°C
0,2 %-yield strength Rp0,2 MPa 450
4. values)
(typical Filler metals for welding nickel, nickel alloys and cast iron
1,0%- yield strength Rp1,0
Tensile strength
Elongation
Rm
A5
MPa
MPa
[%]
480
750
35
4
Impact strength AV [J] 80 40

5. Filler
Average metals for hardNisurfacing
chemical C Crand repair
Fe welding
Mn on cold and
Mo (Nb+Ta) S Si
hot work as well as high
composition Basis speed
0,06 steels.
22 max. Cobalt
6,0 1,6base
9 alloys
3,3 max. 0,01 0,5
of all-weld-metal (%)

Redrying 1h at +300°C.

6. Filler metals for welding

Diameters, copper
Diameter and copper
Length Current alloys
Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,00 300 40-70 18,4 218 4,0
2,50 350 65-100 35,0 143 5,0
3,25 350 95-130 59,0 85 5,0
4,00 350 120-170 89,5 56 5,0
7. Flux-cored wires
Welding positions acc.to EN ISO 6947 PA, PB, PC, PD, PE, PF

Current/Polarity = +/~

8. Approvals

4.11
4.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Alloy
Filler metals for welding C
stainless steels 2.4886
Filler metals for welding heat resistant,
Nickel molybdenum chrome non-scaling
tungsten MIG/WIG and
wirehighly
for welding extremely
corrosion-proof steels
corrosion resistant nickel alloys, suitable for working temperatures of up
to +400°C, cold-tough down to –196°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 18274 S Ni 6276
Material No. 2.4886
AWS/ASME SFA-5.14 ER NiCrMo - 4
2. Filler metals for aluminium welding
Main fields of application Nickel molybdenum chrome tungsten alloys, e.g. 2.4819 - NiMo 16 Cr 15 W
Filler metals for
titanium
(Hastelloywelding
C 276/ Nicrofer 57 16 hMoW) and welded joints between these
alloys and mild, low-alloy and stainless steels/cast steels as well as nickel
based alloys, claddings.

3. Filler
Mechanical metals
propertiesfor welding mild steels and low-alloyedTIG
Welding process
Gas shield
steels,
I1
MIG
I1
of all-weld-metal
special electrode forThermal
chamfering
treatment untreated untreated
(typical values) Test temperature [°C] +20°C -196°C +20°C -196°C
0,2 %-yield strength Rp0,2 MPa 470 470
1,0%- yield strength Rp1,0 MPa 500 500
4. Filler metals for welding nickel, nickel
Tensile strength Rm alloys
MPa and780
cast iron 780
Elongation A5 [%] 35 35
Impact strength AV [J] 80 60 80 60

Average chemical Ni C Cr Fe Mn Mo S Si V W
composition Basis 0,01 15,5 5,0 0,5 16 max. 0,01 0,06 0,3 4
5. Filler metals
of all-weld-metal (%)for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Gas types applicable TIG I1
Gas types applicable MIG I1, Argon HE 30

TIG rod diameters, Diameter Length Kg per box

unit6.weights
Filler metals for welding copper
[mm] and copper [mm]
alloys
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0

7.welding
MIG Flux-cored
wire wires Diameter 1,0mm 1,2mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG =-
8. Approvals
Current/Polarity MIG =+

4.12
4.12
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Alloy
Filler metals for welding C
stainless steels 2.4887
Filler metals for welding heathigh-performance
Rutile coated resistant, non-scaling and170%
electrode giving highly
recovery for
corrosion-proof steels
corrosion and heat-stressed hardfacings. Nickel chrome molybdenum
tungsten weld metal, poor in iron.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14172 E Ni 6276
Material No. 2.4887
AWS/ASME SFA-5.11 E NiCrMo - 4
2. Filler metals for aluminium EN
welding
ISO 14700 E Ni 2
Filler metals for titanium welding
Hardfacing on new hot-working tools and tools in need of repair, e.g. on dies,
Main fields of application
saddles, hot-shearing and hot-trimming knives, and hollow-forging punches.

Hardness of weld metal Thermal treatment untreated strain-hardened

3. values)
(typical Filler metalsfor welding mild steels and low-alloyed
Test temperature [°C] steels,
+20°C + 20°C
special electrode forVickers-hardness
chamfering HV 235 420
Brinell-hardness HB 225 400
Rockwell-hardness HRC - 580

Average chemical C Si Mn Cr Mo W Fe Ni
4. Filler metals for welding
0,08 nickel, nickel alloys
16 and17cast iron
4
composition 1 1 4,5 6 Rest
of all-weld-metal (%)

Redrying 2h at +320°C.

5. Filler metals
Diameters, for hardDiameter
surfacing
[mm] and repair
Length
[mm] [A] welding
Current
on cold
Average
weight perand
Pieces
box
Kg per box
welding current,
hot work as well as high speed steels. Cobalt base alloys
kg/1000 pcs.
unit weights 2,50 350 70-90 37,0 135 5,0
3,25 350 110-140 62,6 80 5,0
4,00 350 170-200 94,8 53 5,0
5,00 450 210-260 190,4 32 6,0
6. Filler metals for welding copper and copper alloys
Welding positions acc.to EN ISO 6947 PA, PB

Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

4.13
4.13
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. NiCu
Filler metals for welding 30 steels
stainless 2.4377
Filler metals for welding heat MIG/TIG
Nickel copper resistant, non-scaling
welding wire, suitable and highly
for working temperatures of
corrosion-proof steels
up to +425°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 18274 steels S Ni 4060
Material No. 2.4377
AWS/ASME SFA-5.14 ER NiCu - 7

2. fields
Main Filler
of metals for aluminium
Nickel-copperwelding
alloys, e.g. NiCu 30 Fe (2.4360) and joining same to copper
alloys as well as steels, joining copper alloys to steels (all-black to red metals),
Filler metals for titanium
application welding
claddings and buffer layers.

Mechanical properties Welding process TIG MIG

of all-weld-metal Gas shield I1 I1
3. Filler metals for welding
Thermalmild steels and
treatment low-alloyed steels,
untreated untreated
(typical values) Test temperature [°C] +20°C -196°C +20°C -196°C
special electrode for0,2chamfering
%-yield strength Rp0,2 MPa >180 >180
Tensile strength Rm MPa >480 >480
Elongation A5 [%] >30 >30

4. Filler
Average metals
chemical for welding
Ni nickel,
C nickel Cu
alloys and
Fe cast iron
Mn Si Ti
composition Basis 0,15 28,0-32,0 2,5 4,0 1,2 1,5-3,0
of all-weld-metal (%)

Gas types applicable TIG I1

Gas types applicable MIG I1
5. Filler metals for hard surfacing and repair welding on cold and
hot
Approvals work
TIG as well as TÜV,
highCEspeed steels. Cobalt base alloys
Approvals MIG TÜV, CE

TIG rod diameters, Diameter Length Kg per box

unit weights [mm] [mm]
6. Filler metals for welding copper
1,60
and copper 1000
alloys 10,0
2,00 1000 10,0
2,50 1000 10,0
3,20 1000 10,0

MIG welding wire Diameter 1,0 mm 1,2 mm

7. Flux-cored wires
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG =-
Current/Polarity MIG
8. Approvals =+

4.14
4.14
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding 4607 steels 2.4607
Filler metals for welding heat resistant,
Nickel molybdenum chrome non-scaling
MIG/TIG wire forand highly
welding nickel alloys.
corrosion-proof steels
Temperatures of up to +400°C, cold-tough down to –196°C.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 2.4607
AWS / ASME SFA-5.14 ER NiCrMo13
EN ISO 18274 S Ni 6059

2. fields
Main Filler
of metals for aluminium welding
2.4610, 2.4605, 2.4819, 1.4562, 2.4856
Filler metals for titanium welding
application

Mechanical properties Welding process TIG MIG

of all-weld-metal Gas shield I1 I1
Thermal treatment untreated untreated
3. values)
(typical Filler metals for welding mild steels and
Test temperature low-alloyed
[°C] +20°C steels,
-196°C +20°C -196°C
special electrode for0,2chamfering
%-yield strength Rp0,2 MPa LNB LNB
Tensile strength Rm MPa >760 >760
Elongation A5 [%] LNB LNB
Impact strength AV [J] LNB LNB

4. Filler metals for welding

Ni nickel,
C nickel Cr
alloys and
Fe cast iron
4
Average chemical Mn Mo Al
composition 56 0,01 22-24 1,5 0,5 15-16,5 0,1-0,4
of all-weld-metal (%)

Gas types applicable TIG I 1, Cronigon 10, Sagox Ni

Gas5.types
Filler metals
applicable MIGfor
hard
I 1 surfacing and repair welding on cold and

hot
Approvals work as well as TÜV,
TIG highCEspeed steels. Cobalt base alloys
Approvals MIG TÜV, CE

TIG rod diameters, Diameter Length Kg per box

unit6.weights
Filler metals for welding copper
[mm] and copper [mm]
alloys
1,60 1000 10,0
2,00 1000 10,0
2,50 1000 10,0
3,20 1000 10,0

Diameter 1,0 mm 1,2 mm

7.welding
MIG Flux-cored
wire wires
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG =-
8. Approvals
Current/Polarity MIG =+

4.15
4.15
 METAL
METALTECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Weldingalloys
alloys -- Special
Specialalloys
alloys

1. Filler
Hard metals for welding stainless steels
surfacing 5
Filler metals for welding heat resistant, non-scaling and highly
Filler corrosion-proof
metals for hard steels
surfacing and repair welding on cold and
hot work as metals
Filler well asfor joint
high welding
speed steels.austenitic/ferritic
Cobalt base alloys.steels

MTC-Name Material No. EN ISO 14700 Page

2. Filler metals for aluminium welding
MIG/WIG MT-250 HB - MSG 1 – 250 5.01
Filler metals for titanium welding
Elektr. MT-300 B - E 1 – UM – 300 P 5.02
MIG/WIG MT-350 HB - MSG 2 – 350 5.03
Elektr. MT-400 B - E 1 – UM – 400 P 5.04
3. Filler metals
MIG/WIG MT-600 forHBwelding mild steels and
1.4718 MSG low-alloyed
6 – 60 steels, 5.05
Elektr.special electrode
MT-600 B for chamfering
~1.4718 E 6 – UM – 60 5.06
Elektr. MT-600 T ~1.4718 E 6 – UM – 60 5.07
MIG/WIG MT-650 HB 1.2606 MSG 3-GZ-60 T 5.08
MIG/WIG MT-2343 MT- 1.2343 MSG 3 – 55 T 5.09
4. Filler metals
MIG/WIG W 45 for welding nickel, nickelMSG
1.2567 alloys
3 –and
45 Tcast iron 5.10
Elektr. MT-W 45 1.2567 E 3 – UM – 45 T 5.11
Elektr. MT-W 49 1.2344 E 6 – UM – 50 PST 5.12
MIG/WIG MT-W 60 1.3348 MSG 4 – 60 – ST 5.13
Elektr. MT-W 60 T 1.3346 E 4 – UM – 60 – ST 5.14
5. Filler metals
Elektr. MT-Wfor 61 hard surfacing
1.3255 and repair welding
E 4 – UM – 60 – on
ST cold and 5.15
Elektr.hot work as well as high- speed steels. Cobalt
MT-MnCr E 7 – UM base alloys
– 250 –K 5.16
Elektr. MT-Dur 59 - E 10 – UM – 60 – GRZ 5.17
Elektr.
Elektr.
MT-Dur 60 V
MT-Dur 63
6. Filler metals
-
-
for65welding
-
E 10 – UM – 65 – GRZ
5.18
5.19 5
Elektr. MT-Dur - copper and copper
E 10 – UMalloys
– 65 – TZ 5.20
Elektr. MT-Dur 67 V - E 10 – UM – 65 – GRZ 5.21
Elektr. MT-Dur 68 - E 10 – UM – 70 – CZ 5.22
Elektr. MT-Co 1 u - E 20 – UM – 55 – CTZ 5.23
Elektr. MT-Co 6 u - E 20 – UM – 45 – CTZ 5.24
7. Flux-cored
Elektr. MT-Cowires
21 u - E 20 – UM – 300 – CTZ 5.25
Elektr. MT-Superdur u - E 21-GF –UM- 60-CG 5.26
Autogen MT-Superdur - G 21 – GF – 55-CG 5.27
Autogen MT-Flexdur - G 21 – UM – 55 CG 5.28

8. Approvals

1.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-HB
Filler metals for welding 250
stainless steels
Filler metals for welding heat
Low-alloy resistant,
manganese chromenon-scaling andforhighly
steel MIG/TIG wire resistant hardfacing
corrosion-proof steels
on pieces to be cut after welding.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels S Fe 1

Main fields of application Hardfacing on machine parts made of structural or cast steel, e.g. slide ways,
impellers, bearing surfaces, wheel rims, rails, pulleys, guidings, conveyor
rollers, couplings.
2. Filler metals for aluminium welding
Filler
Mechanical metals
for titanium
properties welding
Gas shield M11
of welding deposit Thermal treatment untreated
(typical values) Test temperature [°C] +20°
Brinell-hardness HB 225-275
3. Filler metals for welding mild steels and low-alloyed steels,
Average chemical C Si Mn Cr
special
composition
electrode for chamfering
0,30 0,45 1,10 1,0
of all-weld-metals

Gas types applicable TIG I1

Gas4.types
Filler metals
applicable MIGfor welding
M1, M2, nickel,
M3, CO2 nickel alloys and cast iron

TIG rod diameters available, Diameter Length kgs

[mm] [mm] per box
unit weights 1,60 1000 10,0
2,00 1000 10,0
5. Filler metals for hard surfacing
2,50 and repair welding
1000 on cold and 10,0
hot work as well as high speed
3,20 steels. Cobalt base
1000 alloys 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Filler metals for welding copper =and

Current/Polarity TIG
6. - copper alloys
5
Current/Polarity MIG =+

7. Flux-cored wires

8. Approvals

5.01
5.01
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-300
Filler metals for welding Bsteels
stainless
Filler metals for welding heatelectrode
Basic coated resistant, non-scaling
for wear and highly
resistant hardfacings. Welding deposit of
corrosion-proof steels
low-alloy manganese chrome steel.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels E Fe 1

Main fields of application Hardfacing on structural parts which are subjected to moderate wearing stress,
e.g. slide ways, impellers, bearing faces, wheel rims, rails, pulleys, guidings,
brake drums, and hoisting winches.
2. Filler metals for aluminium welding
Filler
Mechanical metals
for titanium
properties welding
Thermal treatment untreated
of welding deposit Test temperature [°C] +20°
(typical values) Vickers-hardness HV 330
Brinell-hardness HB 300
3. Filler metals for welding mild steels
Rockwell-hardness and low-alloyed
HRC steels, 35
special electrode for chamfering
Average chemical C Mn Cr
composition 0,12 1,3 2,8
of all-weld-metals
4. Filler
Redrying metals for welding nickel, nickel alloys and cast iron
2h at +320°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 3,25 450 90 - 110 45,8 131 6,0
5. Filler metals for hard surfacing
4,00 and repair
450 120 - 140welding
68,6on cold 88
and 6,0
hot work as well as high speed steels.
5,00 450
Cobalt
160 - 170
base105,8
alloys 57 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

Filler metals for welding copper=and

+/~ copper alloys
Current/Polarity
6.

7. Flux-cored wires

8. Approvals

5.02

5.02
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-350
Filler metals for welding HB
stainless steels
Filler metals for welding heat
Low-alloy resistant,
manganese non-scaling
chrome steel MIG/WIG and highly
wire for wear resistant
corrosion-proof steels
hardfacings which can be machined with cutting tools.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels S Fe 2

Main fields of application Hardfacing on machine parts made of structural steel or cast steel, e.g. slide
ways, impellers, bearing faces, wheel rims, rails, pulleys, guidings, conveyor
rollers and couplings.
2. Filler metals for aluminium welding
Filler
Mechanical metals
for titanium
properties welding
Gas shield M11
of welding deposit Thermal treatment untreated
(typical values) Test temperature [°C] +20°
Vickers-hardness HV 390
3. Filler metals for welding mild steels
Brinell-hardness and low-alloyed
HB steels,370
Rockwell-hardness HRC 40
special electrode for chamfering
Average chemical C Si Mn Cr Mo
composition 0,08 0,55 0,9 5,0 0,9
of all-weld-metals
4. Filler metals for welding nickel, nickel alloys and cast iron
Gas types applicable TIG I1
Gas types applicable MIG M1, M2, M3, CO2

TIG rod diameters available, Diameter Length kgs

[mm] [mm] per box
unit5.weights
Filler metals for hard surfacing
1,60 and repair welding
1000 on cold and 10,0
hot work as well as high speed
2,00 steels. Cobalt base
1000 alloys 10,0
2,40 1000 10,0
3,20 1000 10,0

MIG welding wire

6.
Diameter 0,8 mm
Filler metals for welding copper and copper alloys
1,0 mm 1,2mm 1,6mm 5
Current/Polarity TIG =-
Current/Polarity MIG =+

7. Flux-cored wires

8. Approvals

5.03
5.03
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-400
Filler metals for welding stainless Bsteels
Filler metals for welding heatelectrode
Basic coated resistant, non-scaling
for overlays and highly
on components and machine
corrosion-proof steels
members, which arc subjected to wear. The electrode can be well welded
with an alternating current or in difficult positions, which makes the
Filler metals for joint welding
removal austenitic/ferritic
of the wearing parts unnecessary. steels
The slag can be casily
removed.

Standard designation EN ISO 14700 E Fe 1

2. Filler metals for aluminium welding
For application on running wheels, excavator parts, worms, rails, slide bars,
Main fields of application
Filler metals for titanium welding
chain links, tractor conveyors, etc. The applications are free of cracks and they
can still be easily machined using hard metal dics.

Mechanical properties Thermal treatment untreated

of welding deposit Test temperature [°C] +20°C
3. Filler metals
(typical values)
for welding mild steels and low-alloyed
Brinell-hardness HB
steels,
375 – 400 HB
special electrode for chamfering
Average chemical C Mn Cr
composition 0,15 1,0 3,0
of all-weld-metals
4. Filler metals for welding nickel, nickel alloys and cast iron
Redrying 2h at +320°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit5.weights
Filler
metals for hard surfacing
3,25
and repair
450
welding
110 – 130
on cold131
45,8
and 6,0
4,00 450 140 – 160 68,6 88 6,0
hot work as well as high speed
5,00 steels.
450 Cobalt
170 – 190 base alloys
105,8 57 6,0
6,00 450 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

6. Filler metals for welding copper and copper alloys
Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

5.04
5.04
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-600
Filler metals for welding stainless HB steels 1.4718
Filler metals for welding
Chromeheat
siliconresistant,
steel MIG/TIGnon-scaling and highly
wire for tough abrasion resistant
corrosion-proof steels
hardfacing.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels S Fe 8
Material No. 1.4718

Main fields of application Hardfacing on machine parts made of structural, cast or high-manganese steel,
2. Filler metals for aluminium
e.g. cylinders,welding
bearer faces, cawlers, running wheels, chaser mills, digging
parts, conveyor worms, rolling crushers, paving breakers, mill guidings, cams,
Filler metals for titanium
clamping welding
and rebound jaws, mixer jibs, anvils.

Mechanical properties Gas shield M11

of welding deposit Thermal treatment untreated
Test temperature[°C] +20°C
3. values)
(typical Filler metalsfor welding mild steels and low-alloyed steels,
Vickers-hardness HV 670
special electrode forRockwell-hardness
chamfering HRC 59

Thermal treatment Soft annealing +780°C. bis +820°C/5h

Hardening +1000°C. at +1050°C/Oel or
4. Filler metals for welding nickel, nickel alloys and cast iron
compressed air

Average chemical C Si Mn Cr
composition 0,50 3 0,4 9,2
of all-weld-metals

Gas5.types
Filler metals
applicable TIGfor hard
I 1 surfacing and repair welding on cold and
hot
Gas types work as
applicable well as M1,
MIG highM2,speed
M3 steels. Cobalt base alloys

5
TIG rod diameters available, Diameter Length kgs
[mm] [mm] per box
unit weights 1,00 1000 10,0
6. Filler metals for welding copper
1,60 and copper alloys
1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

7. Flux-cored wires
Current/Polarity TIG =-
Current/Polarity MIG =+

8. Approvals

5.05
5.05
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding 600 Bsteels 1.4718
Filler metals for welding heatelectrode
Basic coated resistant, non-scaling
for tough, and highly
abrasion resistant hardfacings. Welding
corrosion-proof steels
deposit of wear resistant chrome silicon steel.

StandardFiller metals for joint weldingDIN

designation austenitic/ferritic
8555 steels E 6 - UM - 60
Material No. ~ 1.4718

Main fields of application Tough, abrasion resistant hardfacings on machine parts made of structural,
2. Filler metals for aluminium weldingsteel, on pulleys, bearing faces, crawlers, impellers,
cast or high-manganese
chaser mills, digger parts, conveyor worms, roll type crushers, paving breakers,
Filler metals for titanium welding
mill guidings, cams, clamping and rebound jaws, mixer jibs, and anvils.

Mechanical properties Thermal treatment untreated

of welding deposit Test temperature [°C] +20°C
3. values)
(typical Filler metalsfor welding mild steels
Vickers-hardness and low-alloyed
HV steels,650
Rockwell-hardness HRC 58
special electrode for chamfering
Thermal treatment Soft annealing +780°C at +820°C/5h
Hardening +1000°C at +1050°C/Oil or
compressed air
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn Cr Mo V
composition 0,5 1 0,4 9 1 1,5
of all-weld-metals

Redrying 2h at +300°C.
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high
Diameters, speedLength
Diameter steels. Cobalt
Current base alloys Pieces
Average Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,50 350 50-70 23,2 216 5,0
3,25 350 60-90 27,8 139 5,0
6. Filler metals for welding
3,25copper
450and copper
70-100 alloys
49,1 122 6,0
4,00 450 100-130 73,4 82 6,0
5,00 450 130-180 112,3 53 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

7. Flux-cored
Current/Polarity wires = +/~

8. Approvals

5.06
5.06
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-600
Filler metals for welding stainlessT steels ~1.4718
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for tough and highly
abrasion resistant hardfacing welding
corrosion-proof steels
deposit of wear resistant chrome silicon steel.

StandardFiller metals for joint weldingENaustenitic/ferritic

designation 14700 steels E Fe 8
Material No. ~1.4718

Main fields of application Tough and wear resistant hardfacings on machine parts made of structural,
2. Filler metals for aluminium weldingsteel, e.g. pulleys, bearing faces, crawlers, impellers,
cast or high-manganese
chaser mills, digger parts, conveyor worms, roll type crushers, paving breakers,
Filler metals for titanium welding
mill guidings, cams, clamping and rebound jaws, mixer jibs, and anvils.

Hardness of welding Thermal treatment untreated

deposit (typical values) Test temperature [°C] +20°C
3. Filler metals for welding mild steels
Vickers-hardness and low-alloyed
HV steels,650
Rockwell-hardness HRC 58
special electrode for chamfering
Thermal treatment Soft annealing 5h at +780°C at +820°C
Hardening +1000°C at +1050°C/Oil or
compressed air
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn Cr Mo
composition 0,6 1,7 0,4 6 3,5
of all-weld-metals

Redrying 2h at +300°C.
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high
Diameters, speedLength
Diameter
[mm]
steels.
[mm]
Cobalt
Current base
[A]
alloys per
Average
weight
Pieces
box
Kg per box
welding current,
kg/1000 pcs.
unit weights

6. Filler metals for

2,50
3,25
welding
350
350
3,25copper
60-70
80-100
450and copper
80-100
22,0
35,8
alloys
48,4
227
140
124
5,0
5,0
6,0
5
4,00 450 100-130 71,0 85 6,0
5,00 450 130-180 115,3 52 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

7. Flux-cored
Current/Polarity wires = +/~

8. Approvals

5.07
5.07
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding 650 HB steels 1.2606
Filler metals for welding heat resistant,
Wire electrode non-scaling
made of chrome-silicon and
steel for highly
MIG/TIG welding of tough
corrosion-proof steels
abrasion-resistant applications.

StandardFiller metals for joint weldingENaustenitic/ferritic

designation 14700 steels S Fe 3
Material No. 1.2606

Main fields of application For hot-work steels of hot-work steels, repair and re-production of hot-work
2. Filler metals for aluminium welding
steels for operating temperatures up to +500° C.
Application e.g. For continuous casting rolls, warming cutters, die-casting
Filler metals for titanium welding
molds, dies, etc.

Hardness of welding Thermal treatment untreated

deposit (typical values) Test temperature [°C] +20°C
3. Filler metals for welding mild steels
Rockwell-hardness and low-alloyed
HRC steels,57-59
Thermal treatmentelectrode forSoft
special chamfering
annealing +780°C at +820°C/5h
Hardening +1000°C at +1050°C/Oil or
compressed air

4. Filler
Average metals
chemical for welding
C nickel,
Si nickel
Mn alloys Cr
and castMoiron V W
composition 0,35 1,1 0,4 5,5 1,2 0,25 1,3
of all-weld-metals

Gas types applicable TIG I1

Gas types applicable MIG M1, M2, M3
5. Filler metals for hard surfacing and repair welding on cold and
hot workavailable,
TIG rod diameters as well as high speed steels. Cobalt base
Diameter
[mm]
Length
[mm]
alloys kgs
per box
unit weights 1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
6. Filler metals for welding copper
3,20 and copper alloys
1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Current/Polarity TIG =-
Current/Polarity MIG =+
7. Flux-cored wires

8. Approvals

5.08 5.08
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-2343
Filler metals for welding stainless steels 1.2343
Filler metals for welding
Chromeheat
siliconresistant,
steel MIG/TIGnon-scaling and
wire for tough and highly
abrasion resistant
corrosion-proof steels
hardfacings.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels S Fe 3
Material No. 1.2343

Main fields of application Hardfacings on hot-work steels. Repair work on and manufacture of hot-work
2. Filler metals for aluminium welding
steel parts suitable for working temperature of up to +500°C. Applicable for
example on continous casting strand rolls, hot-shearing blades, diecasting
Filler metals for titanium welding
moulds, female moulds, e.g.

Hardness of welding Gas shield M21

deposit (typical values) Thermal treatment untreated
Test temperature [°C]
3. Filler metals for welding mild steels
Rockwell-hardness
and low-alloyed
HRC
steels,+20°C
50-54
special electrode forVickers-hardness
chamfering HV 600-650

Thermal treatment Soft annealing +780°C. at +820°C/5h

Hardening +1000°C at +1050°C/Oil
4. Filler metals for welding nickel, nickel alloys and cast iron or compressed air

Average chemical C Si Mn Cr Mo V
composition 0,38 1 0,5 5,0 1,1 0,5
of all-weld-metals

Gas5.types
Filler metals
applicable TIGfor hard
I 1 surfacing and repair welding on cold and
Gas types
hotapplicable
work as well as M21
MIG high speed steels. Cobalt base alloys
TIG rod diameters available, Diameter Length kgs

unit weights
6. Filler metals for welding copper
1,60
[mm]
1,00
and copper alloys
1000
[mm]
1000
per box
10,0
10,0
5
2,00 1000 10,0
2,40 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Current/Polarity TIG
7. Flux-cored wires =-
Current/Polarity MIG =+

8. Approvals

5.09
5.09
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding W 45steels 1.2567
Filler metals for welding
MIG/TIGheat resistant,
welding non-scaling
wire for hardfacings and
on highly highly
stressed hot-work tools.
corrosion-proof steels
Welding deposit of chrome tungsten vanadium hard alloy.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels S Fe 3
Material No. 1.2567

Main fields of application Welding new or repairing used tools made of hot-work steel, e.g. press-
2. Filler metals for aluminium welding
bushings, press-discs, press or mandrel plugs, presser or beater dies, male
and female dies, and swages.
Filler metals for titanium welding
Mechanical properties Thermal treatment unannealed tempered soft annealed
of welding deposit Test temperature [°C] +20°C +20°C +20°C
(typical values) Vickers-hardness HV 430 510 250
3. Filler metals for welding mild steels
Brinell-hardness and
HB low-alloyed
410 steels,
- 240
Rockwell-hardness HRC 44 50 22
special electrode for chamfering
Thermal treatment Soft annealing +740°C to +780°C/5h
Hardening +1050°C to +1100°C/Oil or air
Tempering +600°C to +700°C/1- 2h
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn Cr W V
composition 0,2 0,2 0,3 2,4 4,5 0,6
of all-weld-metals

Gas5.types
Filler metals
applicable TIGfor
hard
I 1 surfacing and repair welding on cold and
Gas types applicable MIG M21
hot work as well as high speed steels. Cobalt base alloys
TIG rod diameters available, Diameter Length kgs
[mm] [mm] per box
unit weights 1,60 1000 10,0
6. Filler metals for welding copper
2,00 and copper alloys
1000 10,0
2,40 1000 10,0

MIG welding wire Diameter 1,0mm 1,2mm

Current/Polarity TIG =-
7. Flux-cored
Current/Polarity MIG wires =+

8. Approvals

5.10
5.10
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding W 45steels ~1.2567
Filler metals for welding heat
Lime basic resistant,
coated electrode non-scaling andstressed
for hardfacing highly highlyhot-work
corrosion-proof steels
tools. Welding deposit of chrome tungsten vanadium hard alloy.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels E Fe 3
Material No. ~1.2567

Main fields of application Welding new or repairing used tools made of hot-work steel, e.g. press-
2. Filler metals for aluminium welding
bushings, press-discs, press or mandrel plugs, presser or beater dies, male
and female dies, and swages.
Filler metals for titanium welding
Hardness of welding deposit Thermal treatment unannealed tempered soft annealed
(typical values) Test temperature [°C] +20°C +20°C +20°C
Vickers-hardness HV 430 510 250
3. Filler metals for welding mild steels
Brinell-hardness and
HB low-alloyed
410 steels,
- 240
Rockwell-hardness HRC 44 50 22
special electrode for chamfering
Thermal treatment Soft annealing +740°C to +780°C/5h
Hardening +1050°C to +1100°C/Oil or air
Tempering +600°C to +700°C/1- 2h
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical C Si Mn Cr W V
composition 0,2 0,2 0,3 2,5 4,5 0,6
of all-weld-metals

5. Filler
Redrying metals for hard2h atsurfacing
+300°C. and repair welding on cold and
hot
Diameters,
work as well as high speed
Diameter steels.
Length Cobalt
Current base alloys Pieces
Average Kg per box
[mm] [mm] [A] weight per box
welding current,

5
kg/1000 pcs.
2,50 350 60 - 70 26,5 189 5,0
3,25 350 80 - 100 44,7 112 5,0
6. Filler metals for welding
4,00
copper and copper
350 100 - 130
alloys
67,8 74 5,0
5,00 450 130 - 180 136,2 44 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity
7. Flux-cored wires = +/~

8. Approvals

5.11
5.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding W 49steels
Filler metals for welding heat
Electrode resistant,
for repair welding non-scaling andtools.
on hot and cold-work highly
Welding deposit
corrosion-proof steels
of chrome vanadium molybdenum hard alloy.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels E Fe 3
Material No. ~1.2344

Main fields of application Repair welding on cold and hot-work tools. For injection moulds, diecasting
2. Filler metals for aluminium welding
moulds, hot-pressing tools, hot-shearing blades, punching tools, dies, swages,
and trimming tools.
Filler metals for titanium welding
Hardness of welding deposit 56 to 58 HRC (on highly caburized base materials)
(typical values)

3. Filler
Average metals for welding Cmild steels
chemical and
Cr low-alloyedMo
steels, V
composition 0,5 6,0 1,6 1,0
special electrode for chamfering
of all-weld-metals

Redrying 2h at +300°C.

4. Filler metals
Diameters, for welding nickel,
Diameter nickelCurrent
Length alloys andAverage
cast ironPieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,50 350 60 - 70 22,1 226 5,0
3,25 350 80 - 100 37,5 133 5,0
4,00 350 100 - 130 72,9 69 5,0
5. Filler metals for hard surfacing and repair welding on cold and
Weldinghot
positions PA, PB, PC, PF
workacc.to EN ISO
as well 6947
as highspeed steels. Cobalt base alloys
Current/Polarity = +/~

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

5.12
5.12
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-W
Filler metals for welding 60 steels
stainless 1.3348
Filler metals for welding
MIG/TIGheat resistant,
welding non-scaling
wire for resurfacing andsteel
high-speed highly
tools and hot-work
corrosion-proof steels
tools. Weld metal of tungsten molybdenum chrome hard alloy.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels S Fe 3
Material No. 1.3348

Main fields of application Repair and manufacture of high-speed steel tools with high cutting-
2. Filler metals for aluminium
performance welding
and good toughness when exposed to impact stress. For cutting
and planing tools, milling cutters, wood working tools, cold-work tools and
Filler metals for titanium welding
blanking dies.

Hardness of welding deposit Thermal treatment untrea- soft- hard- tempe-

(typical values) ted annealed ened red
Test temperature
3. Filler metals for welding mild steels [°C]
Vickers-hardness
and
HV
+20°C
low-alloyed
720
+20°C
steels,
280
+20°C
700 720
special electrode forRockwell-hardness
chamfering HRC 58 27 60 62

Thermal treatment Soft annealing +770°C to +840°C/2 to 4h

Hardening +1190°C to +1230°C/compressed air,
4. Filler metals for welding nickel, nickel alloys and cast
oil, warm iron
bath
Tempering +530°C to +560°C/1-2 h

Average chemical C Si Mn W Mo Cr V
composition 1,0 0,3 0,3 1,8 8,3 4,0 1,9
of all-weld-metals
5. Filler metals for hard surfacing and repair welding on cold and
hot
Gas types work as
applicable well
TIG as Ihigh
1
speed steels. Cobalt base alloys
Gas types applicable MIG M21

TIG rod diameters available,

unit6.weights
Filler metals for welding copper
1,60
Diameter
[mm]
and copper alloys
1000
Length
[mm]
kgs
per box
10,0
5
2,00 1000 10,0
2,40 1000 10,0
3,20 1000 10,0

MIG welding wire Diameter 1,0mm 1,2mm

7. Flux-cored wires
Current/Polarity TIG =-
Current/Polarity MIG =+

8. Approvals

5.13
5.13
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-W
Filler metals for welding 60 T
stainless steels ~1.3348
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for tough hardfacing. and highly
Welding deposit of high-
corrosion-proof steels
speed steel.

StandardFiller metals for joint welding

designation EN austenitic/ferritic
ISO 14700 steels E Fe 4
Material No. ~ 1.3346

Main fields of application Repair and manufacture of high-speed steel tools with high cutting-
2. Filler metals for aluminium
performance welding
and good toughness when exposed to impact stress. For cutting
and planing tools, milling cutters, wood working tools, cold-work tools and
Filler metals for titanium welding
blanking dies.

Hardness of welding deposit Thermal treatment untreated tempered

(typical values) Test temperature [°C] +20°C +20°C +600°C
3. Filler metals for welding mild steels and
Vickers-hardness HV low-alloyed
700 steels, 80 600
Rockwell-hardness HRC 60 64 55
special electrode for chamfering
Thermal treatment Preheating +400°C to +600°C
Soft annealing 5 h at +830°C
Hardening +1200°C to +1230°C/oil or warm bath
4. Filler metals for welding nickel, nickel alloys and
+530°C cast iron
Tempering 1 h at +530°C to +540°C

Average chemical C Cr Mo V W
composition 0,9 4,5 8 1,5 2,0
of all-weld-metals
5. Filler metals for hard surfacing and repair welding on cold and
Redryinghot work as well as 2h
high speed steels. Cobalt base alloys
at +300°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit6.weights
Filler metals for welding
2,50copper
350and copper
60 - 90 alloys
26,9 149 4,0
3,25 350 80-120 45,1 89 4,0
4,00 350 110-150 68,0 59 4,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

7. Flux-cored
Current/Polarity wires = +/~

8. Approvals

5.14
5.14
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-W
Filler metals for welding 61 steels
stainless ~1.3255
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
giving 140% recovery and highly
for tough hardfacings.
corrosion-proof steels
Welding deposit of high-speed steel.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels E Fe 4
Material No. ~1.3255

Main fields of application Welding new and repairing highly stressed cutting tools, e.g. screw taps,
2. Filler metals for aluminium welding
reamers, broaching tools, turning tools, counterbores, milling tools, wood
working tools, die-plates, block parts. Depositing highly wear resistant build-up
Filler metals for titanium
welds on welding
machine parts made of structural or cast steel. The weld metal
performs good hardness, also when exposed to moderate compressive or
impact stress.

Hardness of welding deposit Thermal treatment untreated soft annealed tempered

3. Filler metals for
(typical values)
welding mild steels and
Test temperature [°C] low-alloyed
+20°C steels, +20°C
special electrode forVickers-Härte
chamfering HV 250
Rockwell-Härte HRC 60-63 63-66

Thermal treatment Preheating +400°C to +600°C

4. Filler metals for welding nickel, nickel alloys and
Soft annealing 5 h at cast
+830°Ciron
Hardening +1200°C to +1230°C/oil or warm bath
+530°C
Tempering 1 h at +530°C to +540°C

Average chemical C Cr Mo V W Co
5. Filler metals for hard surfacing
composition 0,8 and repair1 welding1,6
4,3 on cold and
18 5
hot work as well as high speed steels. Cobalt base alloys
of all-weld-metals

Redrying 2h at +300°C

Diameters,
6. current,
Filler metals
Diameter
for welding
[mm]copper
Length
and copper
[mm] [A]
Current
alloys
weight
Average Pieces
per box
Kg per box
5
welding
kg/1000 pcs.
unit weights 2,50 350 80-100 30,7 147 4,5
3,25 350 100-130 52,2 86 4,5
4,00 350 130-170 77,5 58 4,5

7. Flux-cored
Welding wires
positions acc.to EN ISO 6947 PD, PE, PG

Current/Polarity = +/~

8. Approvals

5.15
5.15
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-MnCr
Filler metals for welding stainless steels
Filler metals for welding heathigh-performance
Basic coated resistant, non-scaling and
electrode giving highly
140% recovery for strain-
corrosion-proof steels
hardenable surfacings. Welding deposit of manganese steel with high
chromium content.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14700 E Fe 9

Main fields of application Strain-hardenable build-up welds on digging teeth, crushing cones, and breaker
2. Filler metals for aluminium welding
jaws in the stone industry. For cross frogs and diamonds of railway and
tramway rails as well as wearing parts of road construction and mining
Filler metals for titanium
machineswelding
which are mainly exposed to rolling or impact wear.

Hardness of welding Thermal treatment untreated strain-hardened

deposit (typical values) Test temperature [°C] +20°C +20°C
Vickers-hardness HV 265 470-550
3. Filler metals for welding mild steels
Brinell-hardness
and
HB
low-alloyed
250
steels, 450-530
special electrode for chamfering
Average chemical C Mn Cr
composition 0,6 17 14
of all-weld-metals
4. Filler metals for welding nickel, nickel alloys and cast iron
Redrying 2h at +300°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit5.weights
Filler
metals for hard surfacing
2,50 and repair
300 70-90 welding
30,6on cold163
and 5,0
3,25 350 95-105 54,3 92 5,0
hot work as well as high speed
4,00
steels.
450
Cobalt
130-160
base alloys
105,8 57 6,0
5,00 450 170-210 165,4 36 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC

6. Filler metals for welding copper and copper alloys
Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

5.16
5.16
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Dur
Filler metals for welding stainless59steels
Filler metals for welding heathigh-performance
Rutile coated resistant, non-scaling and160%
electrode giving highly
recovery for highly
corrosion-proof steels
wear resistant build-up welds. Welding deposit of chromium hard alloy.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels E Fe 14

Main fields of application Extremely hard, wear and abrasion resistant hardfacings on machine parts and
devices made of structural, cast or high-manganese steel which are exposed to
extremely abrasive wear by sand, gravel, ore, coal, cement or other abrasive
2. Filler metals for aluminium welding
materials. For digger teeth, conveyor plants, mixer or agitator blades, pressing
Filler metals for titanium welding
moulds, guidings, slides and similar parts suffering only little compressive or
impact stress.

Hardness of welding Thermal treatment untreated

deposit (typical values) Test temperature [°C] +20°C
3. Filler metals for welding mild steels
Vickers-hardness andHVlow-alloyed steels,650
special electrode forRockwell-hardness
chamfering HRC 60

Average chemical C Cr Fe
composition 3,5 32 rest
4. Filler metals
of all-weld-metals for welding nickel, nickel alloys and cast iron
Redrying 2h at +300°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
5. Filler metals for hard surfacing
unit weights 2,50
and repair
350 70-100
welding on cold159
31,4
and
kg/1000 pcs.
5,0
hot work as well as high speed steels.
3,25 350 Cobalt
100-110 base 53,1
alloys 94 5,0
4,00 450 130-150 103,4 58 6,0

6. Filler
Welding metals
positions acc.to for welding
EN ISO 6947
5,00

copperPA,
and
450 170-190

PB copper alloys
161,6 37 6,0
5
Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

5.17
5.17
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Dur
Filler metals for welding stainless60steels
V
Filler metals for welding
Tubular heat resistant,electrode
high-performance non-scaling and
for highly wearhighly
resistant hardfacings.
corrosion-proof steelsWelding deposit of chromium hard alloy.

Filler
Main fields metals for joint
of application welding
Wear austenitic/ferritic
and abrasion resistant build-up weldssteels
on machine parts and devices
made of structural, cast or high-manganese steel which are subjected to strong
abrasive wear and moderate impact stress, e.g. conveyor worms and grinding
plates in the chamotte, clay and cement industry as well as in brickyards.
Suitable for hardfacing on beaters of coal and sintering mills, beater blades,
2. Filler metals for aluminium welding
agitators, digger teeth and cone crushers.
Filler metals for titanium welding
Hardness of welding Thermal treatment untreated
deposit (typical values) Test temperature [°C] +20°C
Vickers-hardness HV 780
Rockwell-hardness HRC 63
3. Filler metals for welding mild steels and low-alloyed steels,
Averagespecial
chemicalelectrode
for chamfering
C Mn Cr
composition 5,5 1,5 40
of all-weld-metals

4. Filler metals
Diameters, for welding nickel,
Diameter
[mm]
nickelCurrent
Length
[mm]
alloys
[A]
andAverage
cast ironper
weight
Pieces
box
Kg per box
welding current,
kg/1000 pcs.
unit weights 6,00 450 80-130 74,5 67 5,0
8,00 450 5,0
11,00 450 5,0
5. Filler metals for hard surfacing and repair welding on cold and
Welding positions acc.to EN ISO 6947 PA, PB
hot work as well as high speed steels. Cobalt base alloys
Current/Polarity = +/~

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

5.18
5.18
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Dur
Filler metals for welding stainless 63steels
Filler metals for welding heat resistant,
High-performance non-scaling
rutile coated and
electrode giving highly
170% recovery for highly
corrosion-proof steels
wear resisting hardfacings. Welding deposit of chromium hard alloy
containing.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14700 E Fe 15

Main fields of application Wear and abrasion resistant build-up welds on machine parts and devices
2. Filler metals for aluminium welding
made of structural, cast or high-manganese steel which are subjected to strong
abrasive wear by sand, gravel, ore, coal, cement or similary abrasive material.
Filler metals for titanium welding
Suitable for digger teeth, slag crushers, conveyors, mixer and agitator blades,
scratching teeth, pressing moulds, conveyor worms, sand aerators, guidings
and similar parts subjected to only little compressive or impact stress.

Average chemical C Cr HRc

3. Filler metals for welding mild
composition 5,0 steels and low-alloyed
34,0 steels, 60-62
special electrode for chamfering
of all-weld-metals

Redrying 2h at +300°C.

Diameters,
4. Filler metals Diameter
for welding Length
nickel, nickelCurrent
alloys andAverage Pieces
cast ironper Kg per box
[mm] [mm] [A] weight box
welding current,
kg/1000 pcs.
unit weights 3,25 350 140 - 160 58,8 85 5,0
4,00 350 180 - 200 83,3 60 5,0
5,00 450 220 - 260 166,6 36 6,0

5. Filler
Welding metals
positions acc.tofor hard
EN ISO surfacing PA,
6947 andPBrepair
welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Current/Polarity = +/~

6. Filler metals for welding copper and copper alloys

5

7. Flux-cored wires

8. Approvals

5.19
5.19
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Dur
Filler metals for welding stainless 65steels
Filler metals for welding heatelectrode
Basic coated resistant,
with non-scaling
240% recovery forand highly
welding of parts, which are
corrosion-proof steels
subjected to extreme abrasion with medium impacts. Due to the high
molybdenum contents the abrasion resistance remains up to a
Filler metals for joint welding
temperature of austenitic/ferritic
+600°C. steels
Standard designation EN ISO 14700 E Fe 16

2. fields
Main Filler metals for
of applicationaluminium welding
For overlays on crusher stars, spikes, grate bars, for ore processing plants,
grates, conveyor worms, grinding rollers, impact strips, edge mill ductors,
Filler metals for titanium welding
trimming dies, earth drills, briquette presses, coal planes, draglines and rock
drilling chisels.

Average chemical C Cr Mo W V Nb
composition 5,5 21,0 8,0 1,0 1,0 8,0
3. Filler metals
of all-weld-metals
for welding mild steels and low-alloyed steels,
special electrode for chamfering
Redrying 2h at +300°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
4. Filler
welding current,metals for welding nickel, nickel alloys and cast
kg/1000 iron
pcs.
2,50 350 100-110 39,7 126 5,0
unit weights 3,25 350 140-150 67,1 75 5,0
4,00 450 190-210 130,7 46 6,0
5,00 450 280-310 204,3 29 6,0
5. Filler metals for hard surfacing PA
and repair welding on cold and
Welding positions acc.to EN ISO 6947
hot work as well as high speed steels. Cobalt base alloys
Current/Polarity = +/~

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

5.20
5.20
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Dur
Filler metals for welding stainless 67steels
V
Filler metals for welding heat resistant,
High-performance electrode non-scaling andfor
giving 170% recovery highly
highly wear
corrosion-proof steels
resistant hardfacings. Welding deposit of chromium vanadium hard alloy
containing special carbides.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14700 E Fe 16

Main fields of application Highly wear and abrasion resistant hardfacings on structural parts made of mild
2. Filler metals for aluminium welding
and alloyed steels which are exposed to extremely strong abrasive wear by
sand, gravel, ore, coal, cement or slag. Due to the weld metal’s high abrasion
Filler metals for titanium
resistancewelding
at elevated temperatures MT-Dur 67V is particularly suitable for
hardfacing on crushing plants for live coal, coke and slag.

Hardness of welding Thermal treatment untreated

deposit (typical values) Test temperature [°C] +20°C
3. Filler metals for welding mild steels andHVlow-alloyed steels,
Vickers-hardness 820-900
special electrode forRockwell-hardness
chamfering HRC 65-67

Average chemical C Cr V
composition 5 22 10
4. Filler metals
of all-weld-metals for welding nickel, nickel alloys and cast iron
Redrying 2h at +300°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
5. Filler metals for hard surfacing
2,50
and repair
350 110-150
welding on cold152
33,0
and kg/1000 pcs.
5,0
unit weights
hot work as well as high speed
3,25 steels.
450 Cobalt
140-170 base alloys
71,5 84 6,0
4,00 450 180-220 108,4 55 6,0

6. Filler
Welding metals
positions acc.to for welding
EN ISO 6947
5,00 450 230-300

copperPAand copper alloys

169,4 35 6,0
5
Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

5.21
5.21
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-Dur
Filler metals for welding stainless 68steels
Filler metals for welding heat resistant,
Basic graphitic non-scaling
coated high-performance and highly
electrode giving 180% recovery
corrosion-proof steels
for highly wear resistant hardfacings. Welding deposit of chrome boron
hard alloy containing special carbides.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14700 E Fe 15

Main fields of application Highly wear and abrasion resitant hardfacings on structural parts made of mild
2. Filler metals for aluminium welding
and alloyed steels which are subjected to strong abrasive wear by sand, gravel,
ore, coal, cement or slag. Due to it’s excellent resistance to abrasive wear at
Filler metals for titanium welding MT-Dur 68 is especially suitable for hardfacings on
elevated temperatures,
crushing plants for live coal, coke and slag.

Hardness of welding Thermal treatment untreated

deposit (typical values) Test temperature [°C] +20°C
3. Filler metals for welding mild steels andHVlow-alloyed steels,820
Vickers-hardness
special electrode forRockwell-hardness
chamfering HRC 65

Average chemical C B Cr
composition 5 ~ 4,0 21
4. Filler metals
of all-weld-metals for welding nickel, nickel alloys and cast iron
Redrying 2h at +300°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
5. Filler metals for hard surfacing
2,50
and repair
350 80-120
welding on cold183
27,3
andkg/1000 pcs.
5,0
unit weights
hot work as well as high speed
3,25 steels.
350 Cobalt
140-170 base alloys
48,5 103 5,0
3,25 450 140-170 59,3 101 6,0
4,00 450 180-220 89,8 67 6,0
5,00 450 230-300 140,3 43 6,0
6. Filler metals for welding copper and copper alloys
Welding positions acc.to EN ISO 6947 PA

Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

5.22
5.22
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Co 1 steelsU
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for noncorrosive, heatand highly
resistant and highly wear
corrosion-proof steels
resistant hardfacings.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels E Co 3
AWS/ASME SFA-5.13 E CoCr - C

Main fields of application Highly wear resistant hardfacings with very good corrosion-resistance, good
2. Filler metals for aluminium welding
elevated temperature hardness and non-scaling property, very good sliding
property; polishable weld metal. For highly stressed sealing and sliding faces
Filler metals for titanium welding
on armatures, pumps, engines, press worms, scrapers, earth borers and sliding
skids.

Hardness of welding Test temperature [°C] +20°C +600°C

deposit Vickers-hardness HV 560 430
3. (typical
Filler values)
metals for welding mild steels and
Brinell-hardness HB
low-alloyed steels, 410
special electrode forRockwell-hardness
chamfering HRC 53 44

Average chemical C Co Cr W
composition 2,5 Basis 30 15
4. Filler metals
of all-weld-metals for welding nickel, nickel alloys and cast iron
Redrying 2h at +300°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
5. Filler metals for hard surfacing and repair welding kg/1000 on
pcs. cold and
unit weights 3,25 350 80 - 100 5,0
hot work as well as high speed
4,00
steels.
350
Cobalt
100 - 130
base alloys 5,0
5,00 350 130 - 180 5,0

Welding positions acc.to EN ISO 6947

6.
PA, PB, PC
Filler metals for welding copper and copper alloys
5
Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

5.23
5.23
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Co 6 steels
U
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding and highly
tough, noncorrosive, high-
corrosion-proof steels
temperature and wear resistant hardfacings. Welding deposit of cobalt
chromium tungsten alloy, poor in iron.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14700 E Co 2
AWS/ASME SFA-5.13 E CoCr - A

2. fields
Main Filler metals for
of applicationaluminium
Tough, wear welding
resistant build-up welds with good corrosion resistance high
elevated temperature hardness and resistance to thermal shocks, excellent
Filler metals for titanium welding
non-scaling and sliding properties, and good capability of taking polish. For
sealing and running faces of mountings and pumps, valves, agitator shafts, hot
working mandrils, hot-trimming plates, hot-punching dies and gripping pliers.

Hardness of welding Thermal treatment untreated untreated

3. Filler metals for welding
deposit (typical values)
mild steels and
Test temperature [°C]
low-alloyed
+20°C
steels, +600°C
special electrode forVickers-hardness
chamfering HV 450 300
Brinell-hardness HB 430 285
Rockwell-hardness HRC 45 30

4. Filler
Average metals
chemical for welding nickel,
C nickel alloys
Co and castCriron W
composition 1 Basis 31 6
of all-weld-metals

Redrying 2h at +300°C.

5. Filler metals for hardDiameter

Diameters, surfacing and repair
Length Current welding on coldPieces
Average and Kg per box
welding hot work as well as high
current, speed steels.
[mm] [mm]
Cobalt
[A]
base alloys
weight per box
kg/1000 pcs.
unit weights 3,25 350 80 - 120 5,0
4,00 350 110 - 160 5,0
5,00 350 140 - 180 5,0
6. Filler metals for welding copper and copper alloys
Welding positions acc.to EN ISO 6947 PA, PB, PC

Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

5.24
5.24
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Co 21steels U
Filler metals for welding heatelectrode
Rutile coated resistant, non-scaling
for welding andheat
noncorrosive, highly
and wear resistant
corrosion-proof steels
hardfacings. Welding deposit of cobalt chromium alloy.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels E Co 1
AWS/ASME SFA-5.13 E CoCr-E

Main fields of application Wear resistant and shock-stressed hardfacings with excellent anticorrosion
2. Filler metals for aluminium
property and welding
elevated temperature hardness, e.g. on mountings of all kinds,
valve seats, high-temperature liquid pumps, jet and diecasting moulds as well
Filler metals for titanium welding
as hot-working tools.

Hardness of welding Test temperature [°C] +20°C +600°C

deposit (typical values) Vickers-Hardness HV 320 300
3. Filler metals for welding mild steels and
Brinell-Hardness HB low-alloyed
305 steels, 285
Rockwell-Hardness HRC 32 30
special electrode for chamfering
Average chemical C Cr Ni Mo Co
composition 0,25 27 3,0 5,0 Basic
of all-weld-metals
4. Filler metals for welding nickel, nickel alloys and cast iron
Redrying 2h at +300°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit5.weights
Filler
metals for hard surfacing
3,25 and repair
350 80 - 100welding on cold and 5,0
hot work as well as high speed steels.
4,00 350
Cobalt
100 - 130
base alloys 5,0
5,00 350 130 - 180 5,0

Welding positions acc.to EN ISO 6947 PA, PB, PC

6. Filler metals for welding copper and copper alloys
5
Current/Polarity = +/~

7. Flux-cored wires

8. Approvals

5.25
5.25
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Superdur steels U
Filler metals for welding heat
Graphitic resistant,
coated non-scaling
flux-cored electrode and highly
for extremely wear resistant
corrosion-proof steels
hardfacings. The welding deposit consists of a ferritic solid mass
containing about 70% embedded tungsten carbides.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN 14700 E Fe 20

Main fields of Extremely wear restant hardfacings, e.g. on pieces subjected to extremely high
2. Filler
application metals for aluminium welding
abrasive stress in the sand, gravel, stone, cement and ceramics industry, in
well sinking, mining of ores, road construction and mining. Used for agitators,
Filler metals for titanium welding
drill bits, mixer arms, levelling blades, conveyor worms of all kinds, ductors
(scrapers) and stirrer spindles.

Hardness of welding Tungsten carbides Solid mass

deposit (typical values) Vickers-Hardness HV 0,05 2200 700
3. Filler metals for welding mild steels and low-alloyed steels,
special electrode for chamfering
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 3,50 350 80 - 110 29,4 170 5,0
4,00 350 90 - 120 5,0
4. Filler metals for welding
5,00nickel,350
nickel100
alloys
- 130 and 57,3
cast iron 87 5,0

Welding positions after DIN EN ISO 6947 PA, PB

Current/Polarity = +/~
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

5.26
5.26
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Superdur steels
Filler metals for welding heat
Flux-cored gasresistant,
welding fillernon-scaling
rod for extremelyandwearhighly
resistant hardfacings.
corrosion-proof steels
The welding deposit consists of a ferritic solid mass containing about
70% embedded melting tungsten carbides.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14700 T Fe 20

Main fields of Hardfacing in the sand, gravel, stone, cement and ceramics industry, in well
2. Filler
application metals for aluminium welding
sinking, mining of ores, road construction and mining. Used on agitators, drill
bits, mixer arms, levelling blades, conveyor worms of all kinds, ductors
Filler metals for titanium
(scrapers)welding
and stirrer spindles.

Hardness of welding Tungsten carbides Solid mass

deposit (typical values) Vickers-Hardness HV 0,05 2200 700
3. Filler metals for welding mild steels and low-alloyed steels,
Diameters, Diameter Length Kg per box
welding special
current,electrode for chamfering
[mm] [mm]

unit weights 3,50 350 5,0

4,00 350 5,0
5,00 350 5,0
4. Filler metals for welding nickel,
6,00 nickel alloys and
350 cast iron 5,0
8,00 700 5,0

5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

5

7. Flux-cored wires

8. Approvals

5.27
5.27
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Flexdur steels
Filler metals for welding
Flexiblyheat
coatedresistant,
gas welding non-scaling and wear
filler rod for extremely highly
resistant
corrosion-proof steels
hardfacings. The welding deposit onsists of a nickel-containing solid
mass with about 75% embedded melting tungsten carbides.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14700 T Ni 20

Main fields of Extremely wear resistant hardfacings, especially on pisces subjected to

2. Filler
application metals for aluminium welding
abrasive wear, e.g. in the clay and ceramics industry, in mining, well sinking,
and road construction. Used for building-up worm edges, sand aerators, drill
Filler metals for titanium welding
bits, mixers, agitators and strippers.

Hardness of welding deposit Tungsten carbides Solid mass

(typical values) Vickers-Hardness HV 0,05 2200 700
3. Filler metals for welding mild steels and low-alloyed steels,
Diameters Diameter Length Kgs
welding special
current,electrode for chamfering
[mm] [mm] Per box
unit weights 6,00 500 5

4. Filler metals for welding nickel, nickel alloys and cast iron

5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

5.28

5.28
 METALTECHNOLOGY-CANTERBO
METAL TECHNOLOGY-CANTERBOGMBH
GMBH
Weldingalloys
Welding alloys -- Specialalloys
Special alloys

Copper
1. Filleralloys
metals for welding stainless steels 6
Filler Filler
metalsmetals
for welding copper and copper alloys
for welding heat resistant, non-scaling and highly
corrosion-proof steels
Filler metals for joint welding
MTC-Name austenitic/ferritic
Material No. AWSsteels Page
MIG/WIG MT-CuAl 8 2.0921 ER CuAl-A 1 6.02
Elektr. MT-Albro T 2.0926 ER CuAl-A 2 6.03
2. Filler metals
Elektr. for aluminium
MT-Albro Mn welding ~E CuMnNiAl
2.1368 6.04
MIG/WIG MT-CuAl
Filler metals 8 Mn
for titanium 2.1367
welding ER CuMnNiAl 6.05
MIG/WIG MT-CuAl 8 Ni 2 2.0922 - 6.06
MIG/WIG MT-CuAl 8 Ni 6 2.0923 ER CuNiAl 6.07
MIG/WIG MT-CuSn 2.1006 ER Cu 6.08
3. Filler metals
MIG/WIG for 3welding mild
MT-CuSi steels and
2.1461 ER low-alloyed
CuSi-A steels,6.09
MIG/WIGspecial electrode
MT-CuSn for
6 chamfering
2.1022 ER CuSn-A 6.10
Elektr. MT-Zibro 6 T 2.1025 E CuSn- A 6.11
MIG/WIG MT-CuSn 12 2.1056 - 6.12
MIG/WIG MT-MS 60 2.0366 ER CuZn-A 6.13
4. Filler metals
Autogen for welding
MT-Hartlot 1F nickel,
2.0367nickelRB
alloys and cast iron6.14
CuZn-A
Autogen MT-Hartlot 2 F 2.0711 RB CuZn-D 6.15
MIG/WIG MT-CuAg 2.1211 - 6.16
MIG/WIG MT-CuNi 30 Fe 2.0837 ER CuNi 6.17
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires
6

8. Approvals
 METAL
METAL TECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBO GMBH
GMBH
Welding
Welding alloys
alloys - - Special
Special alloys
alloys

Allocation base material – filler material

1. Filler metals for welding stainless steels
Filler
Material No. metals for welding heat resistant, non-scaling
Filler metals MTC and Page
highly
2.0060 corrosion-proof
E-Cu 57 steels MT-CuSn / MT-CuAg 6.08 / 6.16
2.0065 E-Cu 58 MT-CuSn / MT-CuAg 6.08 / 6.16
2.0070 Filler metals
SE-Cufor joint welding austenitic/ferritic
MT-CuSn / MT-CuAgsteels 6.08 / 6.16
2.0080 F-Cu MT-CuSn / MT-CuAg 6.08 / 6.16
2.0090 SF-Cu MT-CuSn / MT-CuAg 6.08 / 6.16
2.0220 CuZn 5 MT-CuSn 6 6.10
2. Filler metals
2.0230 for aluminium welding
CuZn 10 MT-CuSn 6 6.10
2.0240 CuZn 15 MT-CuSn 6 6.10
2.0250
Filler metals for
CuZn 20
titanium welding MT-CuSn 6 6.10
2.0280 CuZn 33 MT-CuSn 6 6.10
2.0321 CuZn 37 MT-CuSn 6 6.10
2.0335 CuZn 36 MT-CuSn 6 6.10
3. Filler metals
2.0360 for welding mild steels
CuZn 40 and low-alloyed
MT-CuSn 6 steels,
6.10
2.0530 special electrode
CuZn 39 Snfor chamfering MT-CuSn 6 6.10
2.0812 CuNi 10 MT-CuNi 30 Fe 6.17
2.0818 CuNi 15 MT-CuNi 30 Fe 6.17
2.0822 CuNi 20 MT-CuNi 30 Fe 6.17
2.0830 CuNi 25 MT-CuNi 30 Fe 6.17
4.
2.0836 Filler metals for
CuNi 30 welding nickel, nickel alloys
MT-CuNi 30 Fe and cast iron
6.17
2.0872 CuNi 10 Fe MT-CuNi 30 Fe 6.17
2.0916 CuAl 5 MT-CuAl 8 6.02
2.0920 CuAl 8 MT-CuAl 8 6.02
2.0928 G-CuAl 9 MT-CuAl 8 6.02
2.0936 CuAl 10 Fe MT-CuAl 8 Ni 2 6.06
5.
2.0940
Filler metals for hard
G-CuAl 10 Fe
surfacing and repair welding
MT-CuAl 8 Ni 2
on cold
6.06
and
2.0960 hot workCuAl
as well
9 Mn as high speed steels. Cobalt
MT-CuAl 8 Ni 2base alloys 6.06
2.0966 CuAl 10 Ni MT-CuAl 8 Ni 2 6.06
2.0970 G-CuAl 9 Ni MT-CuAl 8 Ni 2 6.06
2.0978 CuAl 11 Ni MT-CuAl 8 Ni 2 6.06
6. Filler metals
2.1050 G-CuSn for
10 welding copper and copper
MT-CuSn 12 alloys 6.12
2.1052 G-CuSn 12 MT-CuSn 12 6.12
2.1090 G-CuSn 7 Zn Pb MT-CuSn 6 6.10
2.1096 G-Cu Sn 5 Zn Pb MT-CuSn 6 6.10
2.1363 CuMn 2 MT-CuSi 3 6.09
2.1522 CuSi 2 Mn MT-CuSi 3 6.09
2.1525 CuSi 3 Mn MT-CuSi 3 6.09
7. Flux-cored wires
The information on our products contained in the table 6
are based on careful examination.
We assume no liability for the correctness.
We
8. ask the user to check our data and the products for their own use.
Approvals

6.01
6.01
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding CuAlsteels 8 2.0921
Filler metals for welding
Copper heat resistant,
aluminium non-scaling
MIG/TIG welding wire. and highly
corrosion-proof steels
Standard designation EN ISO 24373 S Cu 6100
Filler metals for joint welding austenitic/ferritic steels
Material No. 2.0921
AWS/ASME SFA-5.6 ER CuAl - A 1

Main fields Copper aluminium alloys, e.g. Albronze containing 7-9% Al, welded joints
2. Filler
of application metals for aluminium welding
between copper and copper alloys and hardfacings on mild and low-alloy steels
as well as cast iron.
Filler metals for titanium welding
Physical properties El.conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (20-300°C)
[1/K]
3. Filler metals for welding mild
8 steels and low-alloyed
65 steels, .
17 10
-6

special electrode for chamfering

Mechanical properties Gas shield I1
Thermal treatment untreated
of all-weld-metal
(typical values) Test temperature [°C] +20°C
0,2 %-yield strength Rp0,2 MPa
4. Filler metals for welding nickel, nickel
Tensile strength R
alloys and cast 200
MPa
iron
430
m
Elongation A5 [%] 40
Impact strenth AV [J] 100
Brinell-hardness HB 10/1000 140

5. Filler
Average metals for hard surfacingCu
chemical and repair welding on coldAland
hot work as well as high speed steels.
composition Bal.
Cobalt base alloys 8
of all-weld-metal (%)

Gas types applicable TIG I1

Gas types applicable MIG I1
6. Filler metals for welding copper and copper alloys
TIG rod diameters, Diameter Length Kg per box
unit weights [mm] [mm]
1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
7. Flux-cored wires 3,00 1000 10,0

MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF
8. Approvals
Current/Polarity TIG =-
Current/Polarity MIG =+

6.02
6.02
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Albrosteels T 2.0926
Filler metals for welding
Special heat resistant,
rutile coated non-scaling
electrode and highly
for welding aluminium bronzes. Aluminium
corrosion-proof steels
bronze welding deposit.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 2.0926
AWS/ASME SFA-5.7 E CuAl - A 2

Main fields of Copper aluminium alloys, e.g. Al-bronze containing 7-9% Al; hardfacings on
2. Filler
application metals for aluminium
mild and low welding
alloy-steels as well as cast iron.

Filler metals for titanium welding

Physical properties El.conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (20-300°C)
[1/K]
. -6
6 70
3. Filler metals for welding mild steels and low-alloyed steels, 17 10
special
Mechanical electrode forThermal
properties chamfering
treatment untreated
Test temperature [°C] +20°C
of all-weld-metal
(typical values) 0,2 %-yield strength Rp0,2 MPa 400
Tensile strength Rm MPa 660
4. Filler metals for welding nickel, nickel
Elongation A5 alloys and
[%] cast iron 15
Brinell-Härte HB 10/1000 150

Average chemical Cu Al Mn Fe
composition Bal. 8,0 0,5 0,7
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
Redryinghot work as well as 1h
high speed steels. Cobalt base alloys
at +130°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit6.weights
Filler metals for welding
2,50copper350
and copper
50 - 70 alloys16,4 305 5,0
3,20 350 90 - 110 27,7 181 5,0
4,00 350 130 - 150 42,0 119 5,0
5,00 350 150 - 200 84,5 59 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PF

7. Flux-cored wires
Current/Polarity = +/~ 6

8. Approvals

6.03
6.03
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Albrosteels Mn 2.1368
Filler metals for welding
Special heat resistant,
rutile coated non-scaling
electrode and highly
for welding multi-alloy aluminium bronzes.
corrosion-proof steels
Welding deposit of high manganese multi-alloy aluminium bronze.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 2.1368
AWS/ASME SFA-5.6 ~ E CuMnNiAl

Main fields of Manganese and nickel containing copper-aluminium alloys. Highly stressed
2. Filler
application metals for aluminium welding
corrosion resistant build-up welds on mild and low-alloy steels and cast iron.

Filler metals for titanium welding

Physical properties El.conductivity Thermal conductivity
at 20°C at 20°C
(typical values)
[S . m/mm2] [W/(m . K)]
3 30
3. Filler metals for welding mild steels and low-alloyed steels,
Mechanical properties Thermal treatment untreated
of all-weld-metal electrode forTest
special chamfering
temperature [°C] +20°C
(typical values) 0,2 %-yield strength Rp0,2 MPa 400
Tensile strength Rm MPa 650
Elongation A5 [%] 15
4. Filler metals for welding nickel, nickel
Brinell-Härte alloys and
HB 10/1000 cast iron 220

Average chemical Cu Mn Al Fe Ni
composition Bal. 12 6,5 2 2
of all-weld-metal (%)
5.
Redrying
Filler metals for hard surfacing and repair welding on cold and
1h at +70°C- +90°C.
hot work as well as high speed steels. Cobalt base alloys
Diameters, Diameter Length Current Average Pieces Kg per box
[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
unit weights 2,50 350 50-80 20,8 240 5,0
6. Filler metals for welding
3,25copper350
and copper
80-120 alloys35,1 142 5,0
4,00 350 120-150 53,2 94 5,0
5,00 450 150-200 106,7 56 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PF

7. Flux-cored
Current/Polarity wires =+

8. Approvals

6.04
6.04
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CuAl
Filler metals for welding stainless 8 Mn
steels
Filler metals for welding heatwire
MIG welding resistant, non-scaling
of high-manganese and
multi-alloy highlybronze.
aluminium
corrosion-proof steels
Standard designation EN ISO 24373 S Cu 6338
Filler metals for joint welding austenitic/ferritic steels
Material No. 2.1367
AWS/ASME SFA-5.7 ER CuMnNiAl

Main fields of application Manganese and nickel containing copper-aluminium alloy; for highly stressed
2. Filler metals for aluminium welding
corrosion resistant build-up welds on mild and low-alloy steels and cast iron.
Filler metals
Physical properties
for titanium welding
Electrical conductivity at +20°C
2
[S.m/mm ] 3-5
.
(typical values) Thermal conductivity at +20°C [W/(m k)] 30

Mechanical properties Gas shield I1

3. Filler metals for welding
of all-weld-metal Thermalmild steels
treatment and low-alloyed steels, untreated
special electrode forTest
(typical values) chamfering
temperature [°C] + 20°C
0,2%-yield strength Rp0,2 MPa 650
Tensile strength Rm MPa 900
Elongation A5 [%] 10
Brinell-hardness HB 10/1000 290
4. Filler metals for welding nickel, nickel alloys and cast iron
Average chemical Cu Mn Al Fe Ni
composition Bal. 13 8 2,5 2,0
of all-weld-metal(%)

Gas5.types
Filler metals
applicable MIGforhard surfacing and repair welding on cold and
I 1, argon-Helium

hot work as
Diameters available MIG
well as high
Diameter
speed steels.
1,2mm
Cobalt base alloys

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

6. Filler metals
Current/Polarity MIG for welding copper =and
+ copper alloys

7. Flux-cored wires
6

8. Approvals

6.05
6.05
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CuAl
Filler metals for welding stainless 8 Ni 2
steels 2.0922
Filler metals for welding heat
Multi-alloy resistant,
aluminium bronzenon-scaling
MIG/TIG wire forand highly
welding copper aluminium
corrosion-proof steels
alloys.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 24373 steels S Cu 6327
Material No. 2.0922

Main fields of application Copper-aluminium-alloys, e.g. Al-bronze containing 7-9% Al, multi-alloy
2. Filler metals for aluminium welding
aluminium bronzes.

Filler metals
Physical properties for titanium welding
El.conductivity Thermal conductivity
at 20°C at 20°C
(typical values)
[S . m/mm2] [W/(m . K)]
5 50

3. Filler metals for welding

Mechanical properties
mild steels and low-alloyed steels,
Welding process TIG MIG
special electrode forGas
of all-weld-metal chamfering
shield
Thermal treatment
I1
untreated
I1
untreated
(typical values) Test temperature [°C] +20°C +20°C
0,2 %-yield strength Rp0,2 [MPa 270 270
Tensile strength Rm MPa 530 530
4. Filler metals for welding nickel, nickel
Elongation A5 alloys[%]and cast iron
30 30
Impact strength AV [J] 70 70
Brinell-hardness HB 10/1000 140 140

Average chemical Cu Al Ni Mn Fe
Bal.
5. Filler metals
composition for hard surfacing and8 repair welding
2,2 2,2
on cold and 2
of all-weld-metal (%)
hot work as well as high speed steels. Cobalt base alloys
Application notes TIG: preheating of the base material is generally not necessary.
MIG: preheating is only necessary on large work-pieces. Pulsed arc welding is
recommended for the first layer when resurfacing iron materials.
6. Filler metals for welding
Gas types applicable TIG I1
copper and copper alloys
Gas types applicable MIG I1

Diameters available, Diameter Length kgs per box

welding current, [mm] [mm] [kg]
unit weights 2,00 1000 10,0
7. Flux-cored wires 2,40 1000 10,0
3,00 1000 10,0

MIG welding wire Diameter 1,0mm 1,2mm 1,6 mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

8. Approvals
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG =-
Current/Polarity MIG =+

6.06
6.06
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CuAl
Filler metals for welding stainless 8 Ni 6
steels 2.0923
Filler metals for welding
MIG wireheat resistant,
for welding non-scaling
multi-alloy and highly
aluminium bronzes. Welding deposit of
corrosion-proof steels
multi-alloy aluminium bronze.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 24373 steels S Cu 6328
Material No. 2.0923
AWS/ASME SFA-5.7 ER CuNiAl

2. fields
Main Filler
of metals for aluminium welding
Multi-alloy aluminium bronzes, copper aluminium nickel alloys; saltwater
resistant build-up welds on mild and low-alloy steels and cast iron.
Filler metals for titanium
application welding
Physical properties El.conductivity Thermal conductivity
at 20°C at 20°C
(typical values)
[S . m/mm2] [W/(m . K)]
3. Filler metals for welding mild steels
4-5 and low-alloyed steels,20-40
special electrode forThermal
Mechanical properties
chamfering
treatment untreated
of all-weld-metal Test temperature [°C] + 20°C
(typical values) 0,2 %-yield strength Rp0,2 MPa 380
Tensile strength Rm MPa 500
4. Filler metals for welding nickel, nickel
Elongation A5 alloys and [%]
cast iron 10
Brinell-hardness HB 10/1000 150

Average chemical Cu Al Fe Mn Ni
composition Bal. 9,0 3,5 1,5 5,0

5. Filler metals
of all-weld-metal (%) for hard surfacing and repair welding on cold and
hot work as well
Gas types applicable TIG as Ihigh
1 speed steels. Cobalt base alloys
Gas types applicable MIG I1

Diameters available, Diameter Length kgs per box

6. current,
welding Filler metals for welding copper
[mm] and copper [mm]
alloys [kg]
unit weights 2,00 1000 10,0
2,40 1000 10,0
3,00 1000 10,0

MIG welding wire Diameter 1,0mm 1,2mm 1,6mm

7. Flux-cored wires
Welding positions MIG acc.to EN ISO 6947
Welding positions TIG acc.to EN ISO 6947
PA, PB, PF
PA, PB, PC, PE, PF 6
Current/Polarity TIG =-
Current/Polarity MIG =+
8. Approvals

6.07
6.07
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CuSn
Filler metals for welding stainless steels 2.1006
Filler metals for welding
Copper heat resistant,
MIG/TIG non-scaling
wire for welding pure copper.and highly
corrosion-proof steels
Standard designation EN ISO 24373 S Cu 1898
Filler metals for joint welding austenitic/ferritic steels
Material No. 2.1006
AWS/ASME SFA-5.7 ER Cu

Main fields Weldable copper grades, e.g. SE - Cu (2.0070), SW - Cu (2.0076),

2. Filler
of application metals for aluminium welding
SF - Cu (2.0090), OF - Cu (2.0040)
Filler metals for titanium welding
Physical properties El. Conductivity Thermal conductivity Linearer thermal
at 20°C at 20°C expansion coefficient
(typical values)
[S . m/mm2] [W/(m . K)] [1/K]
. -6
15 - 20 120 - 145 18 10
3. Filler metals for welding mild steels and low-alloyed steels,
Mechanical properties
special
of all-weld-metal
electrode forWelding process
chamfering
Gas shield
TIG
I1
MIG
I1
Thermal treatment untreated untreated
(typical values) Test temperature [°C] +20°C +20°C
0,2 %-yield strength Rp0,2 MPa 100 100
4. Filler metals for welding nickel, nickel
Tensile strength Rm
alloys
MPa
and cast 220
iron 220
Elongation A5 [%] 30 30
Impact strength AV [J] 80 70
Brinell-hardness HB 10/1000 60 60

Average chemical Cu Sn Si Mn
5. Filler metals for hard surfacing
composition Bal. and repair
0,8 welding on0,3cold and 0,3
hot work
of all-weld-metal (%)as well as high speed steels. Cobalt base alloys

Gas types applicable TIG I1

Gas types applicable MIG I1

6. Filler
Diameters metals
available, for weldingDiameter
copper and copperLength
alloys kgs per box
welding current, [mm] [mm] [kg]
unit weights 1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,00 1000 10,0
7. Flux-cored wires 4,00 1000 10,0

MIG welding wire Diameter 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF
8. Approvals
Current/Polarity TIG =-
Current/Polarity MIG =+

6.08
6.08
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CuSi
Filler metals for welding stainless 3 steels 2.1461
Filler metals for welding
Copper heat
silicon resistant,
alloy MIG/TIGnon-scaling
welding wire. and highly
corrosion-proof steels
Standard designation EN ISO 24373 S Cu 6560
Filler metals for joint welding austenitic/ferritic steels
Material No. 2.1461
AWS/ASME SFA-5.7 ER CuSi - A

Main fields Copper, low-alloy copper and copper zinc alloys; build-up welds on mild and
2. Filler
of application metals for aluminium welding
low-alloy steels and cast iron.
Filler metals for titanium welding
Physical properties El. conductivity Thermal conductivity Linearer thermal
at 20°C at 20°C Expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (+20°C-+300°C)
[1/K]
. -6
3. Filler metals for welding mild 3 - 4 steels and low-alloyed
35 steels, 18 10

special electrode
Mechanical properties for chamfering
Welding process TIG MIG
Gas shield I1 I1
of all-weld-metal
Thermal treatment untreated untreated
(typical values) Test temperature [°C] +20°C +20°C
0,2 %-yield strength R MPa 120 120
4. Filler metals for welding nickel, nickel
Tensile strength
p0,2
Rm
alloys and cast 350
MPa
iron 350
Elongation A5 [%] 40 40
Impact strength AV [J] 60 60
Brinell-hardness HB 10/1000 80 80

5. Filler
Average metals for hard surfacing
chemical Cu and
Si repair
MnweldingSnon cold Fe
and Zn
composition Bal. 3 1 0,1 0,07 0,1
hot work as well as high speed steels. Cobalt base alloys
of all-weld-metal (%)

Gas types applicable TIG I1

Gas types applicable MIG I1
6. Filler metals for welding copper and copper alloys
Diameters available, Diameter Length kgs per box
welding current, [mm] [mm] [kg]
unit weights 1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
7. Flux-cored wires 3,00 1000 10,0
4,00 1000 10,0
6
MIG welding wire Diameter 0,8mm 1,0mm 1,2mm 1,6mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF
8. Approvals
Current/Polarity TIG =-
Current/Polarity MIG =+

6.09
6.09
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CuSn
Filler metals for welding 6
stainless steels 2.1022
Filler metals for welding
Copper heat resistant,
tin MIG/TIG non-scaling and highly
welding wire.
corrosion-proof steels
Standard designation EN ISO 24373 S Cu 5180
Filler metals for joint welding austenitic/ferritic steels
Material No. 2.1022
AWS/ASME SFA-5.7 ER CuSn - A

Main fields Copper tin alloys, e.g. bronzes containing 4-8%, copper tin alloys (brass), and
2. Filler
of application metals for aluminium welding
copper tin zinc lead cast alloys; build-up welds on cast iron.
Filler metals for titanium welding
Physical properties El.conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (20-300°C)
[1/K]
. -6
3. Filler metals for welding mild 7 - 9 steels and low-alloyed
75 steels, 18 10

special electrode
Mechanical properties for chamfering
Welding process TIG MIG
Gas shield I1 I1
of all-weld-metal
Thermal treatment untreated untreated
(typical values) Test temperature [°C] +20°C +20°C
0,2 %-yield strength R MPa 150 140
4. Filler metals for welding nickel, nickel
Tensile strength
p0,2
Rm
alloys and cast 260
MPa
iron 300
Elongation A5 [%] 20 20
Brinell-hardness HB 10/1000 80 80

Average chemical Cu Sn P
5. Filler metals
composition for hard surfacing
Bal. and repair welding
6 on cold and 0,2
of all-weld-metal (%)
hot work as well as high speed steels. Cobalt base alloys
Gas types applicable TIG I1
Gas types applicable MIG I1

6. Filler
Diameters metals
available, for weldingDiameter
copper and copperLength
alloys kgs per box
welding current, [mm] [mm] [kg]
unit weights 1,60 1000 10,0
2,00 1000 10,0
2,40 1000 10,0
3,00 1000 10,0
7. Flux-cored wires
MIG welding wire Diameter 0,8mm 1,0mm 1,2mm

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF

Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG
8. Approvals =-
Current/Polarity MIG =+

6.10
6.10
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Zibrosteels 6T 2.1025
Filler metals for welding
Special heat resistant,
basic coated non-scaling
electrode andand
for welding brass highly
tin bronzes. Tin
corrosion-proof steels
bronze welding deposit containing 6% tin.

StandardFiller metals for joint welding

designation austenitic/ferritic
Material No. steels 2.1025
AWS/ASME SFA-5.6 E CuSn-A

Main fields of Welding copper tin alloys, e.g. bronze containing 4 – 8% Sn, copper zinc alloys
2. Filler
application metals for aluminium welding
(brass), and copper tin zinc cast alloys; surface welding on cast iron.

Filler metals for titanium welding

Physical properties El.conductivity Thermal conductivity Linear thermal
at 20°C at 20°C expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (20-300°C)
[1/K]
. -6
7 75 18,5 10
3. Filler metals for welding mild steels and low-alloyed steels,
special
Mechanical electrode forThermal
properties chamfering
treatment untreated
of all-weld-metal Test temperature [°C] + 20°C
(typical values) 0,2 %-yield strength Rp0,2 MPa 180
Tensile strength Rm MPa 295
4. Filler metals for welding nickel, nickel
Elongation A5 alloys and [%]
cast iron 25
Brinell-hardness HB 10/1000 100

Average chemical Cu Sn
composition Bal. 6
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
Redryinghot work as well as 1h
high speed steels. Cobalt base alloys
at +200°C.

Diameters, Diameter Length Current Average Pieces Kg per box

[mm] [mm] [A] weight per box
welding current,
kg/1000 pcs.
6.weights
Unit Filler metals for welding
2,50copper350
and copper
55 - 80 alloys19,4 258 5,0
3,25 350 80 - 100 32,0 156 5,0
4,00 450 90 - 130 63,1 95 6,0

Welding positions acc.to EN ISO 6947 PA, PB, PC, PE, PF

7. Flux-cored
Current/Polarity MIG wires = +/~
6

8. Approvals

6.11
6.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. CuSn
Filler metals for welding 12 steels
stainless 2.1027
Filler metals for welding
MIG/TIGheat resistant,
wire for welding tin non-scaling and
bronzes, multi-alloy tinhighly
bronzes and cast red
corrosion-proof steels
bronze. Tin bronze welding deposit containing 12% tin.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 24373 steels S Cu 5410
Material No. 2.1056

Main fields Copper tin alloys, e.g. bronze containing 10-12 % Sn, copper zinc alloys
2. Filler
of application metals for aluminium welding
(brass), copper tin zinc lead cast alloys (red bronze: Rg5, Rg7 ); build-up welds
on cast iron.
Filler metals for titanium welding
Physical properties El.conductivity Thermal conductivity Linear thermal
at +20°C at +20°C expansions coefficient
(typical values)
[S . m/mm2] [W/(m . K)] (+20°C-+300°C)
[1/K]
3. Filler metals for welding mild
3 - 5 steels and low-alloyed
40 - 50 steels, .
18.5 10
-6

special electrode for chamfering

Mechanical properties Termal treatment untreated
Test temperature [°C] + 20°C
of all-weld-metal
(typical values) 0,2 %-yield strength Rp0,2 MPa 200
Tensile strength R MPa] 350
4. Filler metals for welding nickel, nickel
Elongation
m
A5
alloys[%]and cast iron 15
Brinell-hardness 120

Average chemical Cu Sn
composition Bal. 12
5. Filler metals
of all-weld-metal (%) for hard surfacing and repair welding on cold and
hot work
Application notes
as well as Preheating
high speed steels.
to +250°C Cobalt
is required base alloys
for sections thicker than 6 mm.
TIG: When resurfacing iron materials, introduce as much filler rod as possible
into the arc.
MIG: Pulsed arc welding is recommended for build-up welds on iron materials.
6. Filler metals for welding
Gas types applicable TIG I1 copper and copper alloys
Gas types applicable MIG I1

Diameters available, Diameter Length kgs per box

welding current, [mm] [mm] [kg]
unit weights 1,60 1000 10,0
7. Flux-cored wires 2,00 1000 10,0
2,40 1000 10,0
3,00 1000 10,0
4,00 1000 10,0

MIG welding wire Diameter 1,0mm 1,2mm

8. Approvals
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

Current/Polarity TIG =-
Current/Polarity MIG =+

6.12 6.12
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding MS 60 steels 2.0366
Filler metals for welding
Brazingheat
rods resistant, non-scaling and highly
corrosion-proof steels
Standard designation EN ISO 24373 S Cu 4641
Filler metals for joint welding austenitic/ferritic steels
Material No. 2.0366
AWS/ASME SFA-5.8 CuZn-A

Main fields of application MT-MS 60 are particularly desoxidizing and degassing multipurpose brazing
2. Filler metals for aluminium welding
alloys of outstanding properties for high-quality brazing in automotive
construction, in the bicycle and motorcycle industry, in fitting and instrument
Filler metals for titanium welding
construction, plumbing craft, repair shops, etc. Suitable for brazing steel, cast
iron malleable cast steel, red bronze, tin bronze and copper, for hardfacing
sliding and wearing surfaces and for joining brass, bronze, copper and copper
alloys.
3. Filler metals for welding
Physical properties
mild steels andSolidus-liquidus-
Working temperature
low-alloyed steels, Density
special electrode
(typical values) for chamfering temperature
3
[°C] [g/cm ]
900 870/890 8,4

Tensile strength of the brazed 350 MPa (S235) 400 MPa (ST 50)
4. Filler metals for welding nickel, nickel alloys and cast iron
Hardness of brazing deposit when resurfacing: about 110 HB
(typical values)

Average chemical Cu Zn Si Sn
composition 59 40 0,4 0,4
5. Filler metals
of all-weld-metal (%)for hard surfacing and repair welding on cold and
hot work as well as high speed steels. CobaltLength
base alloys
Diameters available, Diameter kgs per box
welding current, [mm] [mm] [kg]
unit weights 1,60 1000 10,0
2,00 1000 10,0
6. Filler metals for welding copper
2,50 and copper 1000
alloys 10,0
3,00 1000 10,0
4,00 1000 10,0
5,00 1000 10,0
6,00 1000 10,0

7. Flux-cored wires
6

8. Approvals

6.13

6.13
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Hartlot 1F
steels
Filler metals for welding heat(brass)
Flux-coated resistant, non-scaling
brazing rods and highly
corrosion-proof steels
Standard designation EN ISO 1044 Cu 303
Filler metals for joint welding austenitic/ferritic steels RB CuZn-A
AWS/ASME SFA-5.8
Material No. 2.0367

Main fields of application MT-Hartlot 1F are particularly desoxidizing and degassing multipurpose brazing
2. Filler metals for aluminium welding
alloys of outstanding properties for high-quality brazing in automotive
construction, in the bicycle and motorcycle industry, in fitting and instrument
Filler metals for titanium welding
construction, plumbing craft, repair shops, etc. Suitable for brazing steel, cast
iron malleable cast steel, red bronze, tin bronze and copper, for hardfacing
sliding and wearing surfaces and for joining brass, bronze, copper and copper
alloys.
3. Filler metals for welding
Physical properties
mild steels andSolidus-liquidus-
Working temperature
low-alloyed steels, Density
special electrode
(typical values) for chamfering temperature
3
[°C] [g/cm ]
900 870/890 8,4

Tensile strength of the brazed 350 MPa (S235) 400 MPa (ST 50)
4. Filler metals for welding nickel, nickel alloys and cast iron
Hardness of brazing deposit when resurfacing: about 110 HB
(typical values)

Average chemical Cu Zn
composition Bal. 38
5. Filler metals
of all-weld-metal (%)for hard surfacing and repair welding on cold and
hot work as well as high speed steels. CobaltLength
base alloys
Diameters, Diameter kgs per box
unit weights [mm] [mm] [kg]
2,00 500 5,0
2,50 500 5,0
6. Filler metals for welding copper
3,00 and copper alloys
500 5,0
4,00 500 5,0

7. Flux-cored wires

8. Approvals

6.14
6.14
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-stainless
Filler metals for welding Hartlot 2F
steels 2.0711
Filler metals for welding heatnewsilver
Flux-coated resistant, non-scaling and highly
solder
corrosion-proof steels
Standard designation EN ISO 1044 Cu 305
Filler metals for joint welding austenitic/ferritic steels
Material No. 2.0711
AWS/ASME SFA-5.8 RB CuZn - D

Main base materials Brazing mild/low-alloy steels, malleable cast steel, cast iron, copper, nickel and
and2.fields
Filler metals for aluminium
nickel alloys, welding
brazing open joints and graps, e.g. in repair shops for vehicles,
agricultural machinery, and construction engines, for use in locksmith’s and
Filler metals for titanium
of application welding
artistic. Suitable for joints subjected to high stress.

Physical properties Working temperature Solidus-liquidus- Density

(typical values) temperature
3
3. Filler metals for welding mild
910
steels and low-alloyed
[°C]
890/920
steels, [g/cm ]
8,7
special electrode for chamfering
Average chemical Cu Zn Ni
composition Bal. 40 10
of all-weld-metal (%)
4. Filler metals for welding nickel, nickel alloys and cast iron
Tensile strength of the brazed 450 MPa (ST 37) 480 MPa (ST 50)
(typical values Hardness of brazing deposit when resurfacing: about 160 - 200 HB

Diameters, Diameter Length kgs per box

5. Filler
unit weights
metals for hard surfacing
[mm] and repair welding
[mm] on cold and[kg]
hot work as well as high speed
2,00 steels. Cobalt base
500 alloys 5,0
2,50 500 5,0
3,00 500 5,0
4,00 500 5,0
6. Filler metals for welding copper and copper alloys

7. Flux-cored wires
6

8. Approvals

6.15

6.15
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CuAg
Filler metals for welding stainless steels 2.1211
Filler metals for welding
Copper heat resistant,
MIG/TIG non-scaling
wire for welding pure copperand highly
corrosion-proof steels
Standard designation EN ISO 24373 S Cu 1897
Filler metals for joint welding austenitic/ferritic steels
Material no. 2.1211

Main fields of application Weldable copper grades, e.g. SE - Cu (2.0070), SW - Cu (2.0076),

SF - Cu (2.0090), OF - Cu (2.0040)
2. Filler metals for aluminium welding
Mechanical and physical
Filler metals for titanium welding
properties of all-weld-metal
Tensile strengtht MPa 210 235
3
Density g/cm 8,9
2
El. conductivity Sm/mm 30 45
3. Filler metals for welding
Solidus –mild steels
temperature and low-alloyed
C° steels,
1070
special electrode forLiquidus
chamfering
– temperature C° 1080
Hardness HB 45 50

Average chemical Cu Ag P Mn
composition
4. Filler metals
of all-weld-metal (%)
for welding Bal. 1,0
nickel, nickel alloys and cast0,02
iron 0,1

Gas types applicable TIG I1

Gas types applicable MIG I1

5. Filler
Diameters, metals for hard surfacing
Diameter and repair welding
Length on cold and
kgs per box
unit weights [mm] [mm] [kg]
hot work as well as high speed
1,60
steels. Cobalt base
1000
alloys 10,0
2,00 1000 10,0
3,00 1000 10,0
4,00 1000 10,0
6. Filler metals for welding copper and copper alloys
MIG welding wire Diameter 1,0mm 1,2mm

Current/Polarity TIG =-
Current/Polarity MIG =+
7. Flux-cored wires
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

8. Approvals

6.16

6.16
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT- stainless
Filler metals for welding CuNi steels 30 Fe 2.0837
Filler metals for welding
MIG/TIGheat resistant,
welding wire made ofnon-scaling andsuitable
copper nickel alloy highlyfor the joining
corrosion-proof steels
and surfacing of alloys of the same type with a nickel content of up to
30% as well as different non-ferrous alloys and steels.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 24373-A S Cu 7158
Material No. 2.0837
AWS/ASME SFA-5.7 ER - CuNi
2. Filler metals for aluminium welding
Filler
Main fields metals for
of applicationtitanium
2.0872
welding
CuNi 10 Fe 2.0882 CuNi 30 Fe
2.0878 CuNi 20 Fe 2.0842 CuNi 44
2.0830 CuNi 25

The weld metal which is resistant to seawater allows the use of these wires in
3. Filler metals for welding mild at
the shipbuilding, steels andrefineries,
petroleum low-alloyed
in the foodsteels,
industry and
special electrode forGenerally in corrosion-resistant apparatus and container construction.
chamfering
Mechanical properties Gas shield I1
Thermal treatment untreated
of all-weld-metal
(typical values) Test temperature [°C] +20°C
4. Filler metals for welding nickel,
0,2 %-yield strengthnickel
Rp0,2 alloys and cast iron
MPa 240
Tensile strength Rm MPa 390
Elongation A5 [%] 30
Impact strenth AV [J] 100
Brinell-hardness HB 10/1000 100

5. Filler metals for hard Ni

Average chemical
surfacing
C
and repair
Cu
welding
Fe
onMn
cold and
Si Ti
hot work as
composition well as high
30 speed steels. rest
0,02 Cobalt base
0,6 alloys
1,0 0,25 0,3
of all-weld-metal (%)

Gas types applicable TIG I 1-I 3

Gas6.types
Filler metals
applicable MIGfor welding
I1 copper and copper alloys
Diameters, Diameter Length kgs per box
unit weights [mm] [mm] [kg]
1,60 1000 10,0
2,00 1000 10,0
7. Flux-cored wires 2,40 1000 10,0
3,00 1000 10,0
6
MIG welding wire Diameter 1,0mm 1,2mm

Current/Polarity TIG =-
8. Approvals
Current/Polarity MIG =+
Welding positions MIG acc.to EN ISO 6947 PA, PB, PF
Welding positions TIG acc.to EN ISO 6947 PA, PB, PC, PE, PF

6.17

6.17
 METAL
METALTECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Weldingalloys
alloys - - Special
Specialalloys
alloys

Flux
1. cored
Filler wires
metals for welding stainless steels 7
Filler metals for welding heat resistant, non-scaling and highly
corrosion-proof steels
Filler metals for joint welding
MTC-Name
austenitic/ferritic
Material No. AWS
steels Page
MIG MT-FD 308 L 1.4316 E308 LT – 1-4 7.01
MIG MT-FD 316 L 1.4430 E316 LT – 1-4 7.02
2.
MIG FillerMT-FD
metals309forLaluminium
1.4332weldingE309 LT – 1-4 7.03
MIG FillerMT-FD
metals307for titanium welding E307 T – 0-4
1.4370 7.04
MIG MT-FD AP-o - - 7.05
MIG MT-FD 55-o - - 7.06
MIG MT-FD 59-o - - 7.07
3.
MIG FillerMT-FD
metals60-o
for welding- mild steels -and low-alloyed steels, 7.08
MIG special electrode
MT-FD 61-o for chamfering
- - 7.09
MIG MT-FD 64-o - - 7.10
MIG MT-FD 65-o - - 7.11
MIG MT-CS 300-o - - 7.12
4.
MIG FillerMT-CS
metals400-o
for welding- nickel, nickel
- alloys and cast iron 7.13
MIG MT-CS 600-o - - 7.14
MIG MT-CS 600-G - - 7.15
MIG MT-RD 100 - E 71 TG 7.16
MIG
5. FillerMT-RD
metals 140 -
for hard surfacing andErepair
71 T1 welding on cold and 7.17
MIG MT-RD 310 - E 70 T5 7.18
MIG hot work
MT-FDas well
2-o as high- speed steels.ECobalt
70 T-GSbase alloys 7.19
MIG MT-CS 70-o - E 70 T-4 7.20

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

7
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 308
stainless L
steels 1.4316
Filler metals for welding heat
Flux-cored MIGresistant, non-scaling
wire for welding and highly
stainless austenitic steels. Welding
corrosion-proof steels
deposit of austenitic chrome nickel steel with extremely low carbon
content, suitable for working temperatures of up to +350°C, non-scaling
Filler metals for joint welding
up to austenitic/ferritic
+800°C, cold-tough down to –40°C.steels

Standard designation EN ISO 17633-A T 19 9 L R M21 2

Material No. 1.4316
2. Filler metals for aluminium welding
AWS/ASME SFA-5.22 E 308 L T 1-4

Filler metals for titanium

Main base metals 1.4306
welding
X 2 CrNi 19 11 1.4301 X 5 CrNi 18 10
1.4306 G-X 2 CrNi 18 9 1.4303 X 5 CrNi 18 12
1.4311 X 2 CrNiN 18 10 1.4308 G-X 6 CrNi 18 9
1.4541 X 6 CrNiNb 18 10 1.4319 X 5 CrNi 18 7
3. Filler metals for welding
1.4550 mildX steels
6 CrNiNband
18 10low-alloyed
1.4310 steels,
X 12 CrNi 17 7
1.4552 G-X 5 CrNiNb 18 9
special electrode for chamfering
Gas types applicable MIG M 21

Mechanical properties M 21
4. Filler metals
of all-weld-metal for welding nickel,
according nickel
to DIN 32 alloys and cast iron
526 (20-25l/min.)
(typical values) 0,2%-yield strength Rp0,2 MPa >270
Tensile strength Rm MPa >550
Elongation A5 [%] >30
Impact stength AV [J]

5. Filler metals for hard surfacing

C Si
and repair
Mn
welding
P S
on coldCrand Ni
Average chemical
hot work as
composition well as high
0,04 speed1,2
steels. 2,0
Cobalt0,03
base alloys
0,025 18,0-21,0 9,0-11,0
of all-weld-metal (%)

Approvals TÜV, CE
6. Filler metals for welding copper and copper alloys
Diameters Diameter Amperage Voltage
and spool types available [mm] [A] [V]
welding current 0,90 100-200 24-30
1,20 150-250 25-32
Plastic spool D-300 with 12,5 kg
7. Flux-cored wires
Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity MIG =+

8. Approvals

7.01
7.01
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 316
stainless L
steels 1.4430
Filler metals for welding heat
Flux-cored MIGresistant, non-scaling
wire for welding and highly
stainless austenitic steels. Welding
corrosion-proof steels
deposit of austenitic chrome nickel molybdenum steel with extremely low
carbon content, suitable for working temperatures of up to +400°C, cold-
Filler metals for joint welding
tough austenitic/ferritic steels
down to –40°C.

Standard designation EN ISO 17633-A T 19 12 3 L R M21 2

Material No. 1.4430
2. Filler metals for aluminium welding
AWS/ASME SFA-5.22 E 316 L T 1-4

Filler metals for titanium

Main base metals 1.4404
welding
X 2 CrNiMo 17 13 2 1.4571 X 6 CrNiMoTi 17 12 2
1.4404 G-X 2 CrNiMo 18 10 1.4573 X 10 CrNiMoTi 18 12
1.4406 X 2 CrNiMoN 17 12 2 1.4580 X 6 CrNiMoNb 17 12 2
1.4429 X 2 CrNiMoN 17 13 3 1.4581 G-X 5 CrNiMoNb 18 10
3. Filler metals for welding
1.4435 mildX steels
2 CrNiMoand
18 14low-alloyed
3 1.4583 steels,
X 10 CrNiMoNb 18 12
special electrode for1.4401 X 5 CrNiMo 17 12 2
chamfering
1.4408 G-X CrNiMo 18 10
1.4420
1.4436
X 5 CrNiMo 18 11
X 5 CrNiMo 17 13 3

Gas types applicable MIG M 21

4. Filler
Mechanical metals
properties for welding
M 21 nickel, nickel alloys and cast iron
of all-weld-metal according to DIN 32 526 (20-25l/min.)
(typical values) 0,2%-yield strength Rp0,2 MPa >295
Tensile strength Rm MPa >580
Elongation A5 [%] >30
Impact stength AV [J]
5. Filler metals for hard surfacing and repair welding on cold and
Averagehot work as
chemical well as high
C speedSi steels.
Mn Cobalt
P base
S alloys
Cr Ni Mo
composition 0,04 1,2 2,0 0,03 0,025 17,0-20,0 10,0-13,0 2,5-3,0
of all-weld-metal (%)

6. Filler
Approvals metals for welding
TÜV, CE copper and copper alloys

Diameters Diameter Amperage Voltage

and spool types available [mm] [A] [V]
welding current 0,90 100-200 24-30
1,20 150-250 25-32
Plastic spool D-300 with 12,5 kg
7. Flux-cored wires
Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity MIG =+
8. Approvals

7.02
7.02
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 309
stainless L
steels 1.4332
Filler metals for welding heat
Flux-cored MIGresistant, non-scaling
wire for joining and
stainless steels andhighly
mild steels and for
corrosion-proof steels
welding buffer layers. Welding deposit of austenitic chrome nickel steel
with very low carbon content, suitable for working temperatures of up to
Filler metals for joint welding austenitic/ferritic steels
+300°C.

Standard designation EN ISO 17633-A T 23 12 L RM2

Material No. 1.4332
2. Filler metals for aluminium welding
AWS/ASME SFA-5.22 E 309 L T 1-4

Filler metals for titanium

Main base metals 1.4301
welding 1.4828
1.4713 1.4878
1.4724
To H-I - H-III, St E 355 as well as any other material also covered by VDTÜV
3. Filler metals for welding mild
data sheet No.1000steels and low-alloyed steels,
special electrode
Gas types applicable MIG forMchamfering
21

Mechanical properties M 21
of all-weld-metal according to DIN 32 526 (20-25l/min.)
4. values)
(typical Filler metals for welding nickel,
0,2%-yield strengthnickel
Rp0,2 alloysMPa and cast iron >295
Tensile strength Rm MPa >580
Elongation A5 [%] >30
Impact stength AV [J]

Average chemical C Si Mn P S Cr Ni
5. Filler metals for hard0,04
composition
surfacing
1,2and repair
2,5 welding
0,03 on cold
0,025 and
22,0-25,0 11,0-14,0
hot work
of all-weld-metal (%)as well as high speed steels. Cobalt base alloys

Application notes Flux-cored wire for joining high-alloy to mild steels and for welding buffer layers.

TÜV ,CE
6. Filler
Approvals metals for welding copper and copper alloys
Diameters Diameter Amperage Voltage
and spool types available [mm] [A] [V]
welding current 0,90 100-200 24-30
1,20 150-250 25-32
Plastic spool D-300 with 12,5 kg
7. Flux-cored wires
Welding positions acc.to EN ISO 6947 PA, PB, PC, PF

Current/Polarity MIG =+
8. Approvals

7.03
7.03
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 307
stainless steels 1.4370
Filler metals for welding heat
Flux-cored MIGresistant, non-scaling
wire for welding andWelding
dissimilar steels. highlydeposit of
corrosion-proof steels
austenitic chrome nickel manganese steel, suitable for working
temperatures of up to +300°C, non-scaling up to +850°C.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 17633-A T 18 8 Mn R M3
Material No. 1.4370
AWS/ASME SFA - 5.22 E 307 T 0-4
2. Filler metals for aluminium welding
Main base metals Dissimilar steels (welded joints between austenitic and ferritic steels), highly
Filler metals for titanium
carburizedwelding
and difficultly weldable steels, high manganese steels, e.g. X 120
Mn 12 (1.3401), buffer layers for hardfacings.

Mechanical properties M21 acc. to DIN 32526 (20-25 l/min).

3. Filler metals
of all-weld-metal for welding mildand
The analyses steels and as
properties low-alloyed steels,
mentioned below
welds performed under M21 gas shield.
were drawn from test
(typical values)
special electrode for0,2%-yield
chamfering
strength Rp0,2 MPa 400
Tensile strength Rm MPa 700
Elongation A5 [%] 38
2
Impact strength ISO V 20°C [J/cm ] 140
4. Filler metals for welding nickel, nickelISO
alloys
V 60°Cand [J/cm
cast2] iron 100

Average chemical C Mn Si Cr Ni
composition 0,10 6,0 0,9 19,0 9,5
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
M 21
Gas types applicable MIG
hot work as well as high speed steels. Cobalt base alloys
Diameters Diameter Amperage Voltage
and spool types available [mm] [A] [V]
welding current 1,20 150-190 24-28
6. Filler metals for welding copper
1,60 and copper200-250
alloys 25-32
Basket spool K-300 with 15,0 kg

Welding positions acc.to EN ISO 6947 PA, PB

Current/Polarity MIG =+
7. Flux-cored wires

8. Approvals

7.04

7.04
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding AP-o
stainless steels
Filler metals for welding heat
Open-arc resistant,
flux-cored wire for non-scaling and highlyWork-
hardfacing and joint-welding.
corrosion-proof steels
hardenable welding deposit of austenitic chrome-manganese steel.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels T Fe 9

Mechanical properties 1. layer 260 HB-Brinell

2. layer 230 HB-Brinell
2. Filler metals for aluminium welding
3. layer 210 HB-Brinell
Filler metals for titanium welding
After work-hardening, hardness can elongation increased from 250 HB to about
500-520 HB.

Average chemical C Mn Si Cr Ni
3. Filler metals for welding
composition 0,5mild steels
16,0and low-alloyed
0,4 steels,
14,0 1,2
special (%)
of all-weld-metal electrode for chamfering
Application notes MT-FD AP-o is designed for wear resistant hardfacings on rails, garbage
disintegrators, digging teeth, dredger bolts, revolving furnace collars, blast
furnace cones, and ore crusher working parts.
4. Filler metals for welding nickel, nickel alloys and cast iron
Welding properties The weld-metal is rust-proof, non-magnetic and ductile and therefore also
suitable for joining high manganese steels.

Diameters Diameter Amperage Voltage

and spool types available [mm] [A] [V]
5. Filler
welding current metals for
hard surfacing
1,60 and repair 200-300
welding on cold and24-28
2,40 250-400 25-32
hot work as well as high speed
2,80
steels. Cobalt base alloys
300-500 26-32
Basket spool K-300 with 15,0 kg

6. Filler metals
Current/Polarity MIG for welding copper =and
+ copper alloys

7. Flux-cored wires

8. Approvals

7.05
7.05
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 55-o
stainless steels
Filler metals for welding
Special heat resistant,
open-arc non-scaling
flux-cored wire and
for hardfacing highly
on parts subjected to
corrosion-proof steels
abrasive wear.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels T Z Fe 16

Mechanical properties 1. layer 50 HRC-Rockwell

2. layer 52 HRC-Rockwell
2. Filler metals for aluminium welding
3. layer 54 HRC-Rockwell
Filler metals for titanium welding
Average chemical C Mn Si Cr
composition 1,5 2,0 1,7 20,0
of all-weld-metal (%)
3. Filler metals for welding
Application
mild steels and low-alloyed steels,
MT-FD 55-o is a special stainless steel flux-cored wire containing 15% Cr. It is
special electrode fordesigned
chamfering
for hardfacing on parts which are subjected to strong abrasive wear
such as conveyer worms, crushing rolls, pump parts, mixing impellers, stirring
arms, and strippers as used in mines, steel mills, construction industry and
agriculture.

4. Filler
Welding metals
properties for welding nickel,
The stainless nickel
weld-metal alloys
consists and chrome
of special cast iron
carbides in an austenitic
matrix. It can be machined by grinding. MT-FD 55-o can also be welded at low
current without any risk of the arc breaking off. Only few spattering and fume
production.

Special notes The first weld deposit on the base material should be very thin, as there will be
only little blending. Do not deposit more than three layers and no layer thicker
5. Filler metals for hard
thansurfacing
10 mm. and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Diameters, Diameter Amperage Voltage
welding current, [mm] [A] [V]
unit weights 1,60 200-300 24-28
2,40
6. Filler metals for welding copper
2,80
and copper 250-400
alloys
300-500
25-32
26-32
Basket spool K-300 with 15 kg

Current/Polarity MIG =+
7. Flux-cored wires

8. Approvals

7.06
7.06
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 59-o
stainless steels
Filler metals for welding
Special heat resistant,
open-arc non-scaling
flux-cored welding wire withand
high highly
Cr-content, suitable
corrosion-proof steels
for welds subjected to abrasive wear.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels T Z Fe 14

Mechanical properties 1. layer 56 HRC-Rockwell

2. layer 60 HRC-Rockwell
2. Filler metals for aluminium welding
3. layer 62 HRC-Rockwell
Filler metals for titanium welding
Average chemical C Mn Si Cr
composition 4,8 1,0 1,2 27,0
of all-weld-metal (%)
3. Filler metals for welding
Application
mild steels and low-alloyed steels,
MT-FD 59-o is a special stainless steel flux-cored wire containing 27% Cr,
special electrode fordesigned
chamfering
for hardfacing on parts which are subject to strong abrasive wear,
such as conveyor worms, crushing rolls, rolls, pump parts, mixing impellers,
stirring arms, and strippers as used in mines, steel mills, construction industry,
and agriculture.

4. Filler
Welding metals
properties for welding nickel,
The stainless nickel
weld-metal alloys and
is composed cast
of special ironcarbides in an
chrome
austenitic matrix. It can be machined by grinding. MT-FD 59-o can also be
welded at low current without any risk of the electric arc breaking off. Only little
spatter and fume is produced.

Special notes The first weld deposit on the base material should be very thin, as there will be
only little blending. Do not deposit more than three layers and no layer thicker
5. Filler metals for hard
thansurfacing
10 mm. and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys
Diameters, Diameter Amperage Voltage
welding current, [mm] [A] [V]
unit weights 1,20 150-190 24-28
6. Filler metals for welding copper
1,60
and copper alloys
200-300 24-28
2,40 250-400 25-32
2,80 300-500 26-32
Basket spool K-300 with 15 kg

7. Flux-cored
Current/Polarity MIG wires =+

8. Approvals

7.07
7.07
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 60-o
stainless steels
Filler metals for welding heat
Open-arc resistant,
stainless non-scaling
steel flux-cored andsubjected
wire for welds highly to mineral
corrosion-proof steels
wear. Weld metal of chrome niob hard alloy.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels T Fe 15

Mechanical properties 1. layer 56 HRC-Rockwell

2. layer 60 HRC-Rockwell
2. Filler metals for aluminium welding
3. layer 63 HRC-Rockwell
Filler metals for titanium welding
Average chemical C Mn Si Cr Nb
composition 5,0 1,8 1,5 22,0 7,0
of all-weld-metal (%)
3. Filler metals for welding
Application notes
mild steels and low-alloyed steels,
MT-FD 60-o is a Cr-Nb-alloyed flux-cored wire for hardfacing on parts subjected
special electrode fortochamfering
friction wear and abrasive mineral wear. The stainless weld metal can only
be machined with grinding tools. Suitable for use on mixing impellers, cement
and concrete pumps, slag crushers, sandblasting equipment and dredging
buckets.

4. Filler
Welding metals
properties for welding nickel,
Neat, slagfree weldnickel
pool; onlyalloys andandcast
little spatter fumeiron
is produced 97% recovery.

Special properties Optimum wear resistance is achieved already with the first deposit.

Diameters, Diameter Amperage Voltage

welding current [mm] [A] [V]
5. Filler metals for hard surfacing
1,60 and repair welding
200-300 on cold and24-28
hot work as well as high speed 2,40 steels. Cobalt 250-400
base alloys 25-32
2,80 300-500 26-32
Basket spool K-300 with 15 kg

Current/Polarity MIG
6. Filler metals for welding copper =and
+ copper alloys

7. Flux-cored wires

8. Approvals

7.08
7.08
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 61-o
stainless steels
Filler metals for welding heat
Open-arc resistant,
stainless non-scaling
steel flux-cored andsubjected
wire for welds highly to mineral
corrosion-proof steels
wear. Weld metal of chrome niob bor alloy.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels T Z Fe 15

Mechanical properties 1. layer 58 HRC-Rockwell

2. layer 62 HRC-Rockwell
2. Filler metals for aluminium welding
3. layer 65 HRC-Rockwell
Filler metals for titanium welding
Average chemical C Mn Si Cr Nb B
composition 5,0 1,8 1,5 22,0 7,0 3,5
of all-weld-metal (%)
3. Filler metals for welding
Application notes
mild steels and low-alloyed steels,
MT-FD 61-o is a Cr-Nb-B-alloyed flux-cored wire for hardfacing on parts
special electrode forsubjected
chamfering
to friction wear and abrasive mineral wear. The stainless weld metal
can only be machined with grinding tools. Suitable for use on mixing impellers,
cement and concrete pumps, slag crushers, sandblasting equipment and
dredging buckets.

4. Filler
Welding metals
properties for welding nickel,
Neat, slagfree weldnickel
pool; onlyalloys andandcast
little spatter fumeiron
is produced 97% recovery.

Special notes Optimum wear resistance is achieved already with the first deposit.

Diameters, Diameter Amperage Voltage

welding current [mm] [A] [V]
5. Filler metals for hard surfacing
1,60 and repair welding
200-300 on cold and24-28
hot work as well as high speed
2,40 steels. Cobalt 250-400
base alloys 25-32
2,80 300-500 26-32
Basket spool K-300 with 15 kg

Filler metals for welding copper =and

Current/Polarity MIG
6. + copper alloys

7. Flux-cored wires

8. Approvals

7.09
7.09
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 64-o
stainless steels
Filler metals for welding
Open-archeat resistant,
flux-cored wire thatnon-scaling
deposits a very and highly micro
hard martensitic
corrosion-proof steels
structure with carbides.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels T Fe 16

Mechanical properties 1. layer 59 HRC-Rockwell

2. layer 61 HRC-Rockwell
2. Filler metals for aluminium welding
3. layer 65 HRC-Rockwell
Filler metals for titanium welding
Average chemical C Cr V W Mn Si B
composition 4,5 24,0 0,8 0,8 1,6 1,0 1,0
of all-weld-metal (%)
3. Filler metals for welding
Application
mild
The deposit steelsagainst
is resistant and low-alloyed steels,
heavy mineral abrasion at higher temperatures.
special electrode forThis
chamfering
wire can be used for one layer welding without loss of hardness. For
mineral and brick industry, screws and van – blades.

Diameters, Diameter Amperage Voltage

welding current [mm] [A] [V]
4. Filler metals for welding nickel,
1,20 nickel alloys150-190
and cast iron 24-28
1,60 200-250 25-32
2,00 300-400 26-32
Basket spool K-300 with 15 kg

Current/Polarity MIG
5. Filler metals = + repair welding on cold and
for hard surfacing and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

7.10
7.10
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding 65-o
stainless steels
Filler metals for welding heat
Stainless steelresistant, non-scaling
open-arc flux-cored andsubjected
wire for welds highly to abrasive
corrosion-proof steels
wear at high temperature. Welding deposit of chrome niob molybdenum
tungsten hard alloy.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 14700 T Fe 16

Mechanical properties 1. layer 59 HRC-Rockwell

2. Filler metals for aluminium welding
2. layer 61 HRC-Rockwell
3. layer 65 HRC-Rockwell
Filler metals for titanium welding
at 600°C: 40 HRC-Rockwell

Average chemical C Si Mn Cr Mo Nb W V
3. Filler metals for welding
composition 5,5 mild
1,3steels 1,4
and low-alloyed
22,0 7,0 steels,
7,0 2,0 1,0
special (%)
of all-weld-metal electrode for chamfering
Application MT-FD 65-o is a flux-cored welding wire for extremely hard surfacing welds
which will resist to extremely strong wear at working temperatures of up to
+600°C. It’s carbidic, ledeburitic structure and, in particular, the uniformly
4. Filler metals for welding nickel,
distributed nickelperform
special carbides alloysmuch andhigher
castwear
ironresistance than any
alloy with pure chrome carbides can do. Suitable for welding conveyor worms,
masticators, crushers, blast furnace cones, cement and concrete pumps,
mixing impellers, toothed rollers, and grates in ore mining equipment.

Welding properties Neat, slagfree weld pool: only little spatter and fume is produced. 97%
recovery.
5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as Maximum
Special notes high speed steels.
hardness Cobalt
is almost achievedbase
with aalloys
single deposit of 3-4 mm
thickness.

Diameters, Diameter Amperage Voltage

welding current [mm] [A] [V]
6. Filler metals for welding copper
1,60 and copper200-300
alloys 24-28
2,40 250-400 25-32
2,80 300-500 26-32
Basket spool K-300 with 15 kg

Current/Polarity MIG =+
7. Flux-cored wires

8. Approvals

7.11
7.11
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CS
Filler metals for welding 300-o
stainless steels
Filler metals for welding heat
Low-alloy resistant,
open-arc non-scaling
flux-cored and highly
wire for wear resistant hardfacings which
corrosion-proof steels
can be machined with cutting tools after welding.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels T Fe 1

Mechanical properties 1. layer 29 HRc

2. layer 32 HRc
2. Filler metals for aluminium welding
3. layer 34 HRc
Filler metals for titanium welding
Average chemical C Mn Si Cr Mo
composition 0,10 2,0 0,5 2,5 0,3
of all-weld-metal (%)
3. Filler metals for welding
Application notes This wiremild steels
produces and low-alloyed
a crack-free steels,
wear resistant deposit with a hardness in the
special electrode forrange
chamfering
of 29 – 34 HRc dependent upon parent material dilution and number
layers. It is particulary suitable for conditions of moderate abrasion and friction,
coupled with resistance to heavy impact. Items suitable for surfacing include:
Caterpillar tracks, roller guides, slideways, track wheels.

4. Filler
Welding metals
properties for welding nickel,
Quiet, stable arc, nonickel alloys
spatter and and
only little cast
fume iron fine-scaled and
is produced,
porefree seam aspect. Recovery is about 90%

Special notes For the final deposit, the interpass temperature should not exceed +250°C.

Diameters, Diameter Amperage Voltage

5. Filler
welding current,metals
for hard surfacing
[mm] and repair welding
[A] on cold and[V]
1,20 140-250 23-27
hot work as well as high speed
1,60
steels. Cobalt base
200-300
alloys 24-28
2,40 250-400 25-32
2,80 300-500 26-32
Basket spool K-300 with 15 Kg
6. Filler metals for welding copper and copper alloys
Current/Polarity MIG =+

7. Flux-cored wires

8. Approvals

7.12
7.12
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CS
Filler metals for welding 400-o
stainless steels
Filler metals for welding heat
Low-alloy resistant,
open-arc non-scaling
flux-cored and highly
wire for wear resistant hardfacings which
corrosion-proof steels
can be machined with cutting tools after welding.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels T Fe 1

Mechanical properties 1. layer 38 HRC

2. layer 40 HRC
2. Filler metals for aluminium welding
3. layer 42 HRC
Filler metals for titanium welding
Average chemical C Mn Si Cr Mo
composition 0,2 2,4 0,8 3,1 0,5
of all-weld-metal (%)
3. Filler metals for welding
Application
mild steels and low-alloyed steels,
MT-CS 400-o is suitable for hardfacing on parts subjected to impact and shock
special electrode forstress
chamfering
such as impellers, rope pulleys (padlock sheaves), wheel rims, slides,
and crane wheels. The martensitic welding deposit can still be machined with
carbide tools.

Welding properties Quiet, stable arc, no spatter and only little fume is produced, finescaled and
4. Filler metals for welding
porefree nickel, nickel
seam aspect. alloys
Recovery is abt.and
86%.cast iron

Special notes For the final deposit, the interpass temperature should not exceed +250°C.

Diameter and spool-types Diameter Amperage Voltage

available, [mm] [A] [V]
5. Filler
welding current metals for hard surfacing
1,20 and repair welding
140-250 on cold and23-27
hot work as well as high speed1,60 steels. Cobalt200-300
base alloys 24-28
2,40 250-400 25-32
2,80 300-500 26-32
Basket spool K-300 with 15 Kg

6. Filler metals for welding copper and copper alloys

Current/Polarity MIG =+

7. Flux-cored wires

8. Approvals

7.13
7.13
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1.
MT-CS 600-o
Filler metals for welding stainless steels
Filler metals for welding heat
Open-arc resistant,
flux-cored wire for non-scaling and
welds resisting to highly and abrasive
compressive
corrosion-proof steels
wear.

StandardFiller metals for joint welding

designation austenitic/ferritic
EN ISO 14700 steels T Fe 3

Mechanical properties 1. layer 45 HRC-Rockwell

2. layer 56 HRC-Rockwell
2. Filler metals for aluminium welding
3. layer 57 HRC-Rockwell
Filler metals for titanium welding
Average chemical C Mn Si Cr Mo Al
composition 0,8 2,0 0,8 2,5 0,2 1,7
of all-weld-metal (%)
3. Filler metals for welding
Application
mild steels and low-alloyed steels,
Due to it’s extreme hardness and still sufficient tenacity, MT-CS 600-o is used
special electrode forforchamfering
repair and maintenance welding on machines and parts subjected to
compressive stress, abrasion and slight impact wear. Hardfacings are welded
on strippers, gravel pumps, crusher ridges, and crushing rolls.

Welding property Stable arc, good slag removal. 90% recovery

4. Filler metals for welding nickel, nickel alloys and cast iron
Special notes Preheat to +200°C - +300°C any base metal sensitive to hardness increase, if
necesarry. Let cool slowly.

Diameter and spool-types Diameter Amperage Voltage

available, [mm] [A] [V]
5. Filler
welding current metals for hard surfacing1,20 and repair 160welding
– 240 on cold and26-30
hot work as well as high speed 1,60 steels. Cobalt base
200 – 350alloys 28-30
2,00 240 – 450 29-32
2,80 300 – 550 30-32
Plastic spool D-300 with 13 Kg

6. Filler metals for welding copper and copper alloys

Current/Polarity MIG =+

7. Flux-cored wires

8. Approvals

7.14
7.14
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-RD
Filler metals for welding stainless600-G
steels
Filler metals for welding heatflux-cored
Metalcored resistant, non-scaling
wire for hardfacing. and highly
corrosion-proof steels
Standard designation EN ISO 14700 T Fe 8
Filler metals for joint welding austenitic/ferritic steels
Mechanical properties 1. layer 50 HRC-Rockwell
2. layer 54 HRC-Rockwell
3. layer 57 HRC-Rockwell
2. Filler metals for aluminium welding
AverageFiller metals
chemical for titaniumC welding Cr Mo Mn Si
composition 0,5 5,5 0,6 1,5 0,6
of all-weld-metal (%)

Tubular Cr-Mo alloyed, metalcored flux-cored wire for wear-resistant surfacing

3. Filler
Application metals
notes for welding mild steels and low-alloyed steels,
up to +700°C. With steels with low weldability, depositing a cushion layer with
special electrode forMT-RD
chamfering
310 is recommended.

Gas types applicable MIG M 21

Diameter and spool-types Diameter Amperage Voltage

4. Filler metals for
available,
welding nickel,
[mm] nickel alloys and
[A] cast iron [V]
welding current 1,20 160 – 260 18-26
1,60 180 – 300 20-29
Basket spool K-300 with 16 Kg

5. Filler metals for hard surfacing and repair welding on cold and
Current/Polarity MIG = + Cobalt base alloys
hot work as well as high speed steels.

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

7.15
7.15
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-RD
Filler metals for welding 100
stainless steels
Filler metals for welding
Tubular heat resistant,
metal-cored wire. non-scaling and highly
corrosion-proof steels
Standard designation EN ISO 17632-A T 46 6 MM 1 H5/ T 42 5 M C1 H5
Filler metals for joint welding austenitic/ferritic steels E 71 T-G
AWS/ASME SFA-5.20

Main base metals S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
2. Filler metals for aluminium welding
P265TR2, L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
L245MB, C21, L245NB, L245GA, S275J2G3, S275NL, GP240GH,
Filler metals for titanium
P275N welding X42, P305GH, P355GH, S355N,
P280GH, L290MB, P295GH, L290NB, L360MB, L360NB,
S355NL, P355N, P355NL1, S355J2G3

Gas types applicable MIG M21-M33, C1

3. Filler metals for welding mild steels and low-alloyed steels,
special electrode for chamfering
Mechanical properties Gas shield M21
of all-weld-metal 0,2%-yield strength R p0,2 MPa >420
(typical values) Tensile strength Rm MPa 500-640
Elongation A5 [%] >20
4. Filler metals for welding nickel, nickel
Impact strength
alloys and cast
[J]
iron

Average chemical C Si Mn Mo Cu
composition 0,06 0,6 2,0 0,2 0,3
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
Approvals TÜV, DB, CE
hot work as well as high speed steels. Cobalt base alloys
Diameter and spool-types Diameter Amperage Voltage
available, [mm] [A] [V]
welding current 1,00 40-270 11-32
6. Filler metals for welding copper
1,20 and copper160-260
alloys 18-26
1,60 180-300 20-29
Basket spool K-300 with 16 Kg

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC, PD, PE, PG
7. Flux-cored wires
Current/Polarity MIG =+

8. Approvals

7.16
7.16
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-RD
Filler metals for welding 140
stainless steels
Filler metals for welding
Tubular heat resistant,
flux-cored wire. non-scaling and highly
corrosion-proof steels
Standard designation EN ISO 17632-A T 46 4 PM 1 H5/ T 46 2 P C 1 H5
Filler metals for joint welding austenitic/ferritic steels E 71 T-1
AWS/ASME SFA-5.20

Main base metals S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
2. Filler metals for aluminium welding
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
P265TR2, L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
Filler metals for titanium
L245MB, welding
C21, L245NB, L245GA, P275N S275J2G3, S275NL, GP240GH,
P280GH, L290MB, P295GH, L290NB, X42, P305GH, P355GH, S355N,
S355NL, P355N, P355NL1, S355J2G3 L360MB, L360NB,

Gas types applicable C 1, M21-M35

3. Filler metals for welding mild steels and low-alloyed steels,
special electrode for chamfering
Mechanical properties Gas shield M21
of all-weld-metals 0,2%-yield strength R p0,2 MPa >460
(typical values) Tensile strength Rm MPa 530-680
Elongation A5 [%] >20
4. Filler metals for welding nickel, nickel
Impact strength
alloys and cast
[J]
iron

Average chemical C Si Mn max P max S Mo

composition 0,06 0,5 2,0 0,022 0,025 0,2
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
Approvals
hot work as well as TÜV,
highDB, CE
speed steels. Cobalt base alloys
Diameter and spool-types Diameter Amperage Voltage
available, [mm] [A] [V]
welding current 1,00 160-270 21-34
6. Filler metals for welding copper
1,20 and copper160-260
alloys 18-26
1,60 180-300 20-29
Basket spool K-300 with 16 Kg

Welding positions MIG acc.to EN ISO 6947 PA, PB, PF, PC, PE, PG
7. Flux-cored wires
Current/Polarity MIG =+

8. Approvals

7.17
7.17
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-RD
Filler metals for welding stainless310steels
Filler metals for welding heat resistant,
Basic flux-cored wire. non-scaling and highly
corrosion-proof steels
Standard designation EN ISO 17632-A T 42 4 B C 3 H5/ T 46 4 B M 3 H5
Filler metals for joint welding austenitic/ferritic steels E 70 T-5
AWS/ASME SFA-5.20

Main base metals S 185, S 235JRG2, S235S, 235J2G3, P245GH, GS 38, P265GH, C22.3,
P265S, P235TR1, P235TR2, 265TR1, GS45, P215NL, P255QL, P265NL,
2. Filler metals for aluminium welding
P265TR2, L210GA, P235GH, 195GH, P250GH, C22.8, S275JR,P275SL
L245MB, C21, L245NB, L245GA, S275J2G3, S275NL, GP240GH,
Filler metals for titanium
P275N welding X42, P305GH, P355GH, S355N,
P280GH, L290MB, P295GH, L290NB, L360MB, L360NB,
S355NL, P355N, P355NL1, S355J2G3

Gas types applicable C 1, M21-M33

3. Filler metals for welding mild steels and low-alloyed steels,
special electrode for chamfering
Mechanical properties Gas shield M21
of all-weld-metals 0,2%-yield strength R p0,2 MPa >420
(typical values) Tensile strength Rm MPa 500-640
Elongation A5 [%] >20
4. Filler metals for welding nickel, nickel
Impact strength
alloys and cast
[J]
iron

Average chemical C Si Mn max P max S

composition 0,06 0,45 2,0 0,02 0,025
of all-weld-metal (%)
5. Filler metals for hard surfacing and repair welding on cold and
Approvals TÜV, DB, CE
hot work as well as high speed steels. Cobalt base alloys
Diameter and spool-types Diameter Amperage Voltage
available, [mm] [A] [V]
welding current 1,00 80-250 15-25
6. Filler metals for welding copper
1,20 and copper160-260
alloys 18-26
1,60 180-300 20-29
Basket spool K-300 with 16 Kg

Welding positions MIG acc.to EN ISO 6947 PA, PB

7. Flux-cored wires
Current/Polarity MIG =+

8. Approvals

7.18
7.18
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-FD
Filler metals for welding stainless2 -steels
o
Filler metals for welding heatflux
An open-arc, resistant,
cored, selfnon-scaling and highly
shielded wire designed for single and
corrosion-proof steels
multipass welding of mild and medium tensile steels in the flat and
horizontal-vertical positions.
Filler metals for joint welding austenitic/ferritic steels
Standard designation EN ISO 17632-A T 42 Z W N 1 H5
AWS/ASME SFA-5.20 E 71 T-GS

2. base
Main Filler metals
metals for aluminium welding
S185, S235, S275, S355
P235GH, P265GH, P295GH,
Filler metals for titanium
P355GH
welding

Mechanical properties 0,2%-yield strength R p0,2 MPa 470

of all-weld-metals Tensile strength Rm MPa 570
3. values)
(typical Filler metalsfor welding mild steels Aand
Elongation 5
low-alloyed
[%] steels, 24
special electrode for chamfering
Average chemical C Si Mn max P max S Al
composition 0,18 0,42 1,1 0,02 0,01 0,9
of all-weld-metal (%)
4. Filler metals for welding nickel, nickel alloys and cast iron
Diameter available, Diameter Amperage Voltage
unit weights [mm] [A] [V]
0,90 30-120 14-17
Plastic spool D-200 with 4,5 Kg

5. Filler metals
Current/Polarity MIG for hard surfacing and
= - repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

7.19
7.19
 METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys

1. MT-CS
Filler metals for welding stainless70steels
-o
Filler metals for welding heatflux
An open-arc, resistant,
cored, selfnon-scaling and highly
shielded wire designed for single and
corrosion-proof steels
multipass welding of mild and medium tensile steels in the flat and
horizontal-vertical positions.
Filler metals for joint welding austenitic/ferritic steels
Standard designation AWS/ASME SFA-5.20 E 70 T-4
EN ISO 17632-A T 38 Z W N3

2. base
Main Filler metals
metals for aluminium welding
S185, S235, S275, S355,
P235GH, P265GH, P295GH,
Filler metals for titanium
P355GH
welding

Mechanical properties 0,2%-yield strength R p0,2 MPa 520

of all-weld-metals Tensile strength Rm MPa 610
3. values)
(typical Filler metalsfor welding mild steels Aand
Elongation 5 low-alloyed
[%] steels, 18
special electrode for chamfering
Average chemical C Si Mn max P max S Al
composition 0,20 0,2 0,6 0,02 0,01 1,3
of all-weld-metal (%)
4. Filler metals for welding nickel, nickel alloys and cast iron
Diameter and spool-types Diameter Amperage Voltage
available, [mm] [A] [V]
welding current 1,20 100-300 19-28
1,60 150-280 27-30
2,40 300-500 26-33
5. Filler metals for hard surfacing
Basket spool D-300and repair
with 13 Kg welding
on cold and
hot work as well as high speed steels. Cobalt base alloys
Current/Polarity MIG =+

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

7.20
7.20
 METAL TECHNOLOGY-CANTERBO GMBH
METAL TECHNOLOGY-CANTERBO GMBH
Welding alloys - Special alloys
Welding alloys - Special alloys

8
1. Filler metals for welding stainless steels
Filler metals for welding heat resistant, non-scaling and highly
corrosion-proof steels
Filler metals for joint welding austenitic/ferritic steels

Approvals
2. Filler metals for aluminium welding
Filler metals for titanium welding

3. Filler metals for welding mild steels and low-alloyed steels,

special electrode for chamfering

4. Filler metals for welding nickel, nickel alloys and cast iron

5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

8
 METAL
METALTECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Weldingalloys
alloys -- Special
Specialalloys
alloys

1. Approvals
Filler metals for welding page 1
stainless steels
Filler metals for welding heat resistant,
Stainless non-scaling and highly
steel MIG/TIG
corrosion-proof steels
Filler metals
Quality TÜV-MIGfor joint welding austenitic/ferritic
TÜV-TIG DB-MIG DB-TIG steels CE
MT-308 L 0,8 bis 1,6 1,0 bis 4,0 0,8 bis 1,6 1,6 bis 4,0
MT-316 L 0,8 bis 1,6 1,0 bis 4,0 0,8 bis 1,6 1,2 bis 4,0
MT-347 0,8 bis 1,6 1,6 bis 4,0 - -
2. Filler metals
MT-318 for aluminium
0,8 bis 1,6 1,0 bis 4,0 welding
0,8 bis 1,6 1,0 bis 4,0
MT-307Filler metals for titanium
0,8 bis 1,6 welding
1,0 bis 4,0 0,8 bis 1,6 1,0 bis 4,0
MT-309 L 0,8 bis 1,6 1,0 bis 4,0 - -
MT-4462 0,8 bis 1,6 1,0 bis 4,0 0,8 bis 1,6 1,0 bis 4,0
MT-904 L 0,8 bis 1,2 1,6 bis 4,0 0,8 bis 1,2 1,6 bis 4,0
3. Filler metals for welding mild steels and low-alloyed steels,
special electrode for Stainless
chamferingsteel SAW-Wire
Quality TÜV DB CE
MT-308 L -
4. Filler
MT-316 L metals for welding nickel, nickel
- alloys and cast iron
MT-347 -
MT-318 -

Stainless steel Elektrode

5. Filler metals for hard surfacing and repair welding on cold and
Quality
hot work as well TÜV
as high speed 2,0DB Cobalt base alloys
steels. CE
MT-308 L 2,0 bis 4,0 bis 4,0
MT-316 L 2,0 bis 4,0 2,0 bis 4,0
MT-347 2,0 bis 4,0 2,0 bis 4,0
MT-318 2,0 bis 4,0 2,0 bis 4,0
6. Filler
MT-307 metals for welding
2,0 bis 4,0 copper and
- copper alloys
MT-312 - 1,6 bis 5,0
MT-309 Mo 2,0 bis 4,0 2,5 bis 4,0

Mild steels and low-alloyed wire MIG/TIG

7. Flux-cored wires
Quality TÜV-MIG TÜV-TIG DB-MIG DB-TIG CE
MT-Mo 0,8 bis 1,6 1,0 bis 4,0 0,8 bis 1,6 1,0 bis 4,0
MT-5424 - 1,0 bis 4,0 - 1,0 bis 4,0
MT-CrMo 1 0,8 bis 1,6 0,8 bis 4,0 0,8 bis 1,6 -
MT-WSG II - 1,0 bis 4,0 - 1,2 bis 4,0
8. 2Approvals
MT-SG Ti - - 0,8 bis 1,6 -
MT-NiCu 1 0,8 bis 1,6 - 0,8 bis 1,6 -
MT-NiMo vk - - 0,8 bis 1,6 -
MT-NiMoCr 0,8 bis 1,2 - 1,0 bis 1,2 -
MT-NiMoCr 90 - - 0,8 bis 1,6 -
MT-G III - 1,5 bis 5,0 - -
MT-2,5 Ni 0,8 bis 1,6 - 0,8 bis 1,6 -
MT-SG II 0,8 bis 1,6 - 0,8 bis 1,6 -
MT-SG III 0,8 bis 1,6 - 0,8 bis 1,6 -
( Approval)
(- no approval)

8.01
8.01
8
 METAL TECHNOLOGY-CANTERBO
METAL GMBH
TECHNOLOGY-CANTERBO GMBH
Welding alloys alloys
Welding - - SpecialSpecial
alloys alloys

1. Filler metals for weldingApprovals

stainless steels page 2
Filler metals for welding heat resistant, non-scaling and highly
Aluminium Wire MIG/TIG
corrosion-proof steels
Filler metals for
Quality joint welding
TÜV-MIG austenitic/ferritic
TÜV-TIG DB-MIG steels
DB-TIG CE
MT-AlMg 4,5 MnZr 0,8 bis 1,6 1,6 bis 5,0 0,8 bis 1,6 1,6 bis 5,0
MT-AlMg 4,5 Mn 0,8 bis 1,6 1,6 bis 5,0 0,8 bis 1,6 1,6 bis 5,0
MT-AlMg 5 0,8 bis 1,6 1,6 bis 5,0 0,8 bis 1,6 0,8 bis 4,0
2. MT-AlSi
Filler5 metals for0,8aluminium
bis 1,6 welding
1,6 bis 5,0 0,8 bis 1,6 1,6 bis 5,0
Filler12metals for titanium
MT-AlSi - welding- 0,8 bis 1,6 1,6 bis 5,0

Special alloys
3. Filler metals for welding mild steels and low-alloyed steels,
Quality TÜV-MIG TÜV-TIG DB-MIG CE
special
MT-82 electrode 0,8
forbischamfering
1,6 1,2 bis 3,0 -
MT-Nicro 625 0,8 bis 1,6 1,0 bis 4,0 -
MT-Nickel 0,8 bis 1,6 1,0 bis 4,0 -
MT-NiCu 30 0,8 bis 1,6 1,0 bis 4,0 -
4. MT-4607
Filler metals for welding
0,8 bis 1,6 nickel,
0,8nickel
bis 3,2 alloys and- cast iron
MT-NiFe - - 1,0 bis 1,2 -

Mild steels and low-alloyed elektrodes

5. Filler metals for hardTÜV
Quality surfacing and repair
DB welding on cold
CEand
hot work as well as2,5
MT-Mo high speed steels. Cobalt
bis 6,0 - base alloys
MT-RC 3 1,6 bis 6,0 2,0 bis 6,0
MT-RC 3 blau 2,0 bis 5,0 2,5 bis 6,0
MT-RR 6 2,0 bis 6,0 2,0 bis 6,0
6. Filler
MT-RR C 6metals for welding copper and 2,5
2,0 bis 5,0 copper
bis 5,0 alloys
MT-B 10 2,0 bis 6,0 2,5 bis 6,0
MT-BR 10 2,5 bis 5,0 2,5 bis 5,0
MT-CrMo 1 2,5 bis 6,0 2,5 bis 6,0
MT-RR 6 gelb - 2,5 bis 6,0
MT-RR B 7 2,5 bis 5,0 2,5 bis 5,0
7. Flux-cored
MT-RR 11 wires 2,0 bis 5,0 -
MT-TRB rot 2,0 bis 5,0 2,5 bis 6,0
MT-RR C 6 blau - 2,5 bis 5,0
( Approval)
(- no approval)

8. Approvals

8.02
8.02
 METAL
METALTECHNOLOGY-CANTERBO
TECHNOLOGY-CANTERBOGMBH
GMBH
Welding
Weldingalloys
alloys -- Special
Specialalloys
alloys

1. Filler metals for welding stainless steels

Approvals page 3
Filler metals for welding heat resistant, non-scaling and highly
corrosion-proof steels Fluxcored wire
Filler metals for joint welding austenitic/ferritic steels
Qualität TÜV-MIG DB-MIG CE
MT-FD 316 L 0,9 bis 1,6 -
MT-FD 309 L 0,9 bis 1,6 -
2. 309
MT-FD Filler
MoLmetals for aluminium
0,9 bis 1,6 welding -
Filler
MT-FD 308 L metals for titanium
0,9 bis 1,6welding -
MT-RD 100 1,2 bis 1,6 1,2 bis 1,6
MT-RD 140 1,0 bis 1,6 1,0 bis 1,6
MT-RD 310 1,2 bis 2,0 1,2 bis 2,0
3. Filler metals for welding mild steels and low-alloyed steels,
( Approval)
special
electrode for chamfering
(- no approval)

4. Filler metals for welding nickel, nickel alloys and cast iron

5. Filler metals for hard surfacing and repair welding on cold and
hot work as well as high speed steels. Cobalt base alloys

6. Filler metals for welding copper and copper alloys

7. Flux-cored wires

8. Approvals

8.03

8.03
8