Scribd
Upload
117 views

Printing Dept 4th Sem Question Paper

This document contains information about assessments for several printing technology courses, including: 1) An assessment for an Offset Printing Technology course with questions about inking rollers, dampening systems, drying processes, and makeready operations. 2) An assessment for a Colour Reproduction course with questions about how ink and substrate properties affect colour, dot gain, and colour sequences. 3) An assessment for a Flexographic Printing course with questions about factors for flexo barcode printing, flexo plate mounting and proofing, and parts of a flexo press. 4) An assessment for a Mechatronics course with PLC architecture and programming questions.

Uploaded by

Janis gracelin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
117 views

Printing Dept 4th Sem Question Paper

This document contains information about assessments for several printing technology courses, including: 1) An assessment for an Offset Printing Technology course with questions about inking rollers, dampening systems, drying processes, and makeready operations. 2) An assessment for a Colour Reproduction course with questions about how ink and substrate properties affect colour, dot gain, and colour sequences. 3) An assessment for a Flexographic Printing course with questions about factors for flexo barcode printing, flexo plate mounting and proofing, and parts of a flexo press. 4) An assessment for a Mechatronics course with PLC architecture and programming questions.

Uploaded by

Janis gracelin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

DEPARTMENT OF PRINTING TECHNOLOGY

COLLEGE OF ENGINEERING, GUINDY


ANNA UNIVERSITY, CHENNAl - 600 025
PT 5404 Offset Printing Technology
ASSESSMENT NO 2 (June.2022)
Answer ALL questions
Part A (2 x1=2 Marks) Timing: 1.30 Hours
Answer all questions.
1. Write short notes on physical properties of inking rollers. (2 Mark)
2. What is the functions agitator in inking system? (2 Mark)
3 Listout the characteristics of offset blanket? (2 Mark)
4. How will you store the offset blankets? (2 Mark)
5. State the ISO standard for offset printing. (2 Mark)
Part B (2 X 16 32 Marks)
1. (a) Discuss in detail about two roll and three roll dampening system with neat sketches. (16) (Or)
(b) How the inking rollers are arranged in offset and its properties with behavior. (16)
2. (a) Explain in detail about different drying process in sheet fed offset. (16) (Or)
b) What is makeready operation and major events in makeready? (16)
Part C (1 X8=8 Marks)
1. Why do we need a hybrid printing press? Take a suitable job and explain with the necessary diagram.
PT5401 Colour Reproduction
Assessment 2
Time: 1.5 hours
Max Marks: 50
Part A (5 x2 marks 10 marks)
=

1. How does ink affect the colour reproduction? (C03)


transparency
2. State the Kubelka Munk theory. (CO3)
3. What is proportionality failure? (CO4)
4 How will you determine the image resolution of a press, paper and ink system? (C04)
5 List the types of rendering intents. (C04)
Part B (2x 16 marks =32 marks)
6. Explain in detail on howsubstrate properties affect colour reproduction. (CO3)
7. Discuss in detail about the significance of ink film thickness, dot
gain and colour sequence in printing.
(CO4)
Part C (1 x8 marks =8 marks)
8. Analyse the reasons for ad! tivity and proportionality failure. (CO4)
Department of Printing Technology
PT5402 Flexographic Printing
Marks: 50 Assessment lI Date: 06/06/22
Part-A 5x2=10)
1. What are factors to be considered for printing barcode in flexo? 2
2. What is star target?
3. Why alcohol is used as cleaning solution for flexo plate and plate 2
cylinder?
4. What is build up ratio? 2
5 Write the advantages of curing. 2

6.
Part B Marks: (2 x 16= 32)
i.Describe any two flexo plate mounting procedure in detail. (10)
ii. Explain the types, characteristic and selection of mounting tapes in detail. (6)
OR
7. Explain the offline plate mounting and proofing procedure, and how it is advantageous.
8. i. Explain the various parts and functions of flexography press in detail.
(10)
ii. Briefly explain the salient features of drive
system of flexo press. (6)
OR
9. Explain the Tension zones and elaborate the web tension control system with neat diagram.
Part-C Marks: (1 x 8= 8)
10. With a neat flowchart explain the types of digital flexO plate making
Department of Printing Technology, CEG Campus, Anna University
Gundy, Chennai -600 025
MES752 Mechatronics Assessment I
Time: 1.00 Hour Answer All Question Max.Marks: 25
Date: 10-06-22 PART-A (3 x 2=6 Marks)

1. How to select the PLC for your particular application?


2. Draw the ladder diagram of OR Logic in PLC.
3. List the various operating modes in 8255 PPI
PART-B
4. (a) i) Sketch and explain the architecture of a PLC. 9
(OR)
b)) Explain howdata handling operations are carried out using PLC. (9)
5 Draw and explain traffic light control using 8085 microprocessors and write the suitable
software programme. (10)

*************

You might also like