NEW CODE

WIND DESIGN WORKSHOP - LOW & MEDIUM RISE STRUCTURES AS/NZS

1170.2-2021
STANDARD
DR JOHN HOLMES BSc(Eng) Ph.D FIE (Aust) Recommended Text:
Live
• Leading consultant on Wind Loads and Actions throughout Wind Loading
the world and in Australia. streamed
Handbook
• Chairperson of BD6/2 - Wind Actions for Standards Australia. via
for Aus & NZ
• Involved in writing the various editions of Australian
(2012)
Standards AS 1170.2-1989 to AS/NZS 1170.2-2021.

WORKSHOP SUMMARY 8 hours of CPD 1.30 - 3.00 Session 3

This one-day workshop will address the key aspects of basic wind design - MEDIUM HEIGHT OFFICE BUILDING (L-Shaped + Shielding)
as per the new AS/NZS 1170.2-2021 Standard and outlined in the - WIND ON SOLAR PANELS
session headings below. • Two different case studies:
a) The first example is an 8 storey office building with
This course is primarily aimed at engineers who will design structures nonrectangular shape and shielded by other surrounding
less than 8 storeys in height such as smaller office buildings and 3 storey buildings. The example is located in Canberra (but as usual all
walk ups. examples can be applied anywhere in Australia or NZ).
b) The second example is for Ground & Roof-Mounted Solar
There have been significant changes to this Wind Standard which will
Panels - A solar farm is planned for a site in flat, open country,
be addressed in both ETIA Wind Design Workshops.
in the Pilbara region of Western Australia, inland from Onslow
If engineers wish to analyse tall structures under dynamic loading (eg < (Region D in AS/NZS 1170.2-2021). Design wind loads are
1 Hz, cross wind responses, turbulence intensity and damping) then we required to be determined for both unshielded and shielded
would refer them to our ETIA course “Wind Design Workshop – solar arrays.
Dynamic & High Rise Structures”. • Tutorial Exercise

3.00 - 3.15 Afternoon Break

CALCULATORS REQUIRED
Sessions provide worked examples, tutorial exercises and solutions.

PROGRAMME (8.30am AEST Zoom invite will be emailed)

9.00 - 11.00 Session 1 3.15 - 5.00 Session 4
- WIND ACTION THEORY - PITCHED FREE ROOFS
• Wind is by far the most crucial loading in Australia (once dead and • This example, a structure based in Tasmania, addresses parameters
live loads have been addressed). Its complexities and unusual such as lag distance and changes in terrain leading up to the structure
behaviour require a more detailed analysis than that required for (which impact on the Mz, cat value). It evaluates various situations
particular to pitch free roofs (eg empty zone vs blocked zone) under
permanent and imposed actions.
the roof and how the net pressure coefficients vary. Frictional drag
• The basic principles of wind design as well as the development of forces are also examined.
this Standard over many years, including new parameters such as • Tutorial Exercise
climate change factor and shape factors.
Certificate of Attendance will be emailed
• Requirements of the BCA and its relevance to AS/NZS 1170.2-2021.

11.00 - 11.15 Morning Break

11.15 - 1.00 Session 2 NEW CODE
- INDUSTRIAL WAREHOUSE BUILDINGS
• Wind design of Steel Framed Industrial Buildings (eg Portal Frame AS/NZS 1170.2-2021
structures) eg warehouses and factories on the edge of urban areas.
• Key parameters to be addressed include: STANDARD
(a) Location (b) Terrain (c) Topography (d) Building Dimensions
(e) Building Orientation (f) Regional Wind Speed
(g) Aerodynamic Shape Factor (h) Pressures on Doors and Windows
• Tutorial Exercise
1.00 - 1.30 Lunch Break

• One day course – $780 pp • To register,

visit our website
FURTHER INFORMATION
• (02) 9899 7447 www.etia.net.au
• +61 413 998 031 OR scan the QR
• [email protected] Code.

Cancellations made more than 5 working days prior to a course will incur a 20% processing fee of the full registration amount.
Cancellations made 5 working days or less will incur forfeiture of the full registration fee.