Scribd
Upload
36 views

IPC DeviceManager Tool Guide

This document provides a guide for using the DeviceManager Tool to search for and configure IP cameras. It describes how to search for cameras, view camera feeds, modify camera settings like IP addresses, upgrade camera firmware, export and import camera configurations, and restore camera user information.

Uploaded by

Akhiroedin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views

IPC DeviceManager Tool Guide

This document provides a guide for using the DeviceManager Tool to search for and configure IP cameras. It describes how to search for cameras, view camera feeds, modify camera settings like IP addresses, upgrade camera firmware, export and import camera configurations, and restore camera user information.

Uploaded by

Akhiroedin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

DeviceManager Tool Guide

V2.0
2015/02
Contents

Part I: IPC search ...................................................................................... 3


1.1 Cameras search .......................................................................... 3
1.2 View the camera by browser ...................................................... 3
1.3 Modify camera IP address .......................................................... 4
1.4 RTSP streaming .......................................................................... 4
Part II: IPC upgrade .................................................................................. 5
Part III: IPC configuration ......................................................................... 6
3.1 Modify the camera’s time .......................................................... 7
3.2 Export/Import IP camera’s configuration ................................... 7
3.3 Restore user information ........................................................... 8
Part I: IPC search

Please double click the software Device Manager to run it on your


computer.

1.1 Cameras search

If the camera is connected in the same LAN with the computer, it will be
listed on the software’s main interface, as following image shown.

You also can click Refresh to get present camera list, if new cameras are
connected.

1.2 View the camera by browser

Right click on the camera list, and select View on the web. This function
will open the IP camera on your default browser.
Notice: please make sure the camera and your pc are connected in same
network segment.

3
1.3 Modify camera IP address

Make sure the camera list’s item Check is selected, then input the new IP
address setting & its user name/password, and click Set to save it.

1.4 RTSP streaming

Right click on the camera list, and then select Get URL

4
On the new pop-up window, please click Get URL to get its RTSP
streaming link, as following image shown.

Part II: IPC upgrade

Click tab IPC upgrading as following image shown.

1. Please add the cameras to upgrading list.


There are two ways to add cameras to upgrading list.
Way 1: Input Starting IP address & Ending IP address, then click Add IPC
to add cameras manually.
5
Way 2: click Add online IPC to add all online IP cameras.
2. Select the right camera & upgrade file to do updating.

3. Click Upgrade, then waiting for its upgrade state showing you success.

Part III: IPC configuration

Click tab Configuration as following image, then click Refresh, as


following image shown.

6
3.1 Modify the camera’s time

Make sure the camera list’s item Index is selected, and input the right
date/time & user information, then click Set to save it. After that, please
wait for the configuration state show you succeed.

3.2 Export/Import IP camera’s configuration

Export: Right click the camera list, then select Export configuration
package to export IP camera’s configuration.

Import: Make sure the camera list’s item Index is selected, and input the
right user information, then click Browse to select the configuration
package. Click set to start import. Please wait for the configuration state
show you succeed.

7
3.3 Restore user information

Make sure the camera list’s item Index is selected, and input the right
user information, then click Restore user to save it. After that, please
wait for the configuration state show you succeed.

You might also like