Scribd
Upload
31 views

Application Note: APNUS013 NAT Configuration Example

Uploaded by

Kha Dinh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Application Note: APNUS013 NAT Configuration Example

Uploaded by

Kha Dinh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

APPLICATION NOTE

APNUS013 NAT Configuration example


For WaveOS

May 2020 – Rev. A1


Copyright © 2020 ACKSYS Communications & Systems. All rights reserved.
APPLICATION NOTE | APNUS013 NAT Configuration example

CONFIGURING A WAVEOS PRODUCT IN NAT MODE


Desired NAT configuration:

- Private network (LAN): 192.168.100.100/24


- Public network (WLAN): 192.168.1.10/24
Translation rules:
- PLC_MASTER: TCP 192.168.1.10: 8080 translated to 192.168.100.101: 80
- PLC_IO : UDP 192.168.1.10: 4200 translated to 192.168.100.101: 4200
Private side (LAN): 2
Default gateway = 192.168.100.100 (or route 192.168.1.0/24 to 192.168.100.100)
After configuring the WiFi settings, go to SETUP/NETWORK and edit the default network (lan):

Rename the network as PUBLIC and fill in the required fields. Then go to the Interfaces Settings tab

Copyright © 2020 ACKSYS Communications & Systems. All rights reserved.


APPLICATION NOTE | APNUS013 NAT Configuration example

Uncheck the Ethernet adapter checkbox, then Save

Click NETWORK on the left to return to NETWORK OVERVIEW. Click on Add Network

Copyright © 2020 ACKSYS Communications & Systems. All rights reserved.


APPLICATION NOTE | APNUS013 NAT Configuration example

Name the network PRIVATE and fill in the required fields, then switch to the Interfaces Settings tab

Uncheck the Bridge interfaces box and select Ethernet adapter LAN

Copyright © 2020 ACKSYS Communications & Systems. All rights reserved.


APPLICATION NOTE | APNUS013 NAT Configuration example

In the Advanced settings tab, check that the network persistence is Enabled then Save

Click on Routing/Firewall

Click on NETWORK ZONES then Add zone

Copyright © 2020 ACKSYS Communications & Systems. All rights reserved.


APPLICATION NOTE | APNUS013 NAT Configuration example

Name the zone PRIVATE then select PRIVATE network

Save and add a new zone from NETWORK ZONE

Copyright © 2020 ACKSYS Communications & Systems. All rights reserved.


APPLICATION NOTE | APNUS013 NAT Configuration example

Name the new area PUBLIC, check NAT and select the PUBLIC network, then Add in TRAFFIC FORWARD.

Fill in the required fields for the first translation rule, then add the second rule

Save and return to NETWORK ZONE to edit the PRIVATE area

Copyright © 2020 ACKSYS Communications & Systems. All rights reserved.


APPLICATION NOTE | APNUS013 NAT Configuration example

In INTER-ZONE FORWARDING, allow routing to the PUBLIC area, then Save 8

You will now be able to reboot to activate the new configuration. In TOOLS/SAVE CONFIG, click REBOOT. At this
point, make sure your PC is configured on the PRIVATE network subnet of the product (192.168.100.0/24) to return
to the administration.

After reboot, you can check that the physical interfaces are functional in the STATUS/NETWORK page

Copyright © 2020 ACKSYS Communications & Systems. All rights reserved.


APPLICATION NOTE | APNUS013 NAT Configuration example

If the access point is within range, you can check in STATUS/WIRELESS/ASSOC STATIONS that the product is
correctly associated

Copyright © 2020 ACKSYS Communications & Systems. All rights reserved.

You might also like