Scribd
Upload
245 views4 pages

List of Tools and Materials Masonry

The document lists the materials needed to train 25 trainees for the Masonry NC II qualification. It includes tools, equipment, materials, and personal protective equipment. Over 50 different tools are listed along with quantities, including hammers, trowels, floats, saws, levels, and scaffolding. Equipment includes a bagger mixer and block cutters. Materials include concrete blocks, cement, sand, gravel, reinforcing bars and nails. Personal protective equipment that will be provided includes reflective vests, with safety shoes and clothing to be provided by each trainee.

Uploaded by

ROMEL GONZAGA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
245 views4 pages

List of Tools and Materials Masonry

The document lists the materials needed to train 25 trainees for the Masonry NC II qualification. It includes tools, equipment, materials, and personal protective equipment. Over 50 different tools are listed along with quantities, including hammers, trowels, floats, saws, levels, and scaffolding. Equipment includes a bagger mixer and block cutters. Materials include concrete blocks, cement, sand, gravel, reinforcing bars and nails. Personal protective equipment that will be provided includes reflective vests, with safety shoes and clothing to be provided by each trainee.

Uploaded by

ROMEL GONZAGA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

3.

6 LIST OF MATERIALS

List of materials for the training of a maximum of 25 trainees for MASONRY NC II


are as follows:

A. (Full Qualification)

TOOLS
QTY DESCRIPTION
10 pcs. Bucket / Pail

1 pc Mixing board
(4x8 feet)
10pcs. Shovel, flat

25 pcs. Steel trowel


(8 inches straight-edged pointed)
25 pcs. Wooden float

25 pcs. Steel tape (5 meters)

5 pcs. Plumb bob

2 sets Steel Scaffold


(2 layers, 1.2 meters)
5 pcs. Chalk line

5 pcs. Cross-cut saw (18 inches)

2 pcs. Bar cutter

2 pcs. Bar bender

5 pcs. Steel square

5 pcs. Cold chisel

5pcs. Hacksaw

5 pcs. Level hose


(5 meters)
25 pcs. Claw hammer

5 pcs. Measuring box

5 pcs Hack saw blade


MASONRY NC II Revision 01 Promulgated (10/29/2018) 80
TOOLS
QTY DESCRIPTION
5 pcs. Steel brush

5 pcs. Wheel barrow

5 pcs. Crow bar, 18 inches

5 pcs. Level bar/spirit level, 24”

5 pcs. Notched trowel, 3/8”

5 pcs. Mortar pan

5 pcs. Side cutter plier

5 pcs Straight edge bar, 4’

EQUIPMENT

QTY DESCRIPTION
1 unit One bagger mixer (gas operated)
2 pcs. Block cutter (7 inches blade dia.)
MATERIAL

QTY DESCRIPTION
625 pcs. Concrete Hollow blocks (4 inches)

20 bags Cement

50 pcs. Reinforcing bars (10 mm diameter)

6 m3 Sand

Var Water

10 kls. GI wire, #20

MASONRY NC II Revision 01 Promulgated (10/29/2018) 81


MATERIAL
QTY DESCRIPTION
10 kls. Common wire Nails (assorted sizes)
30 pcs. Lumber (2” x 2” x 10’)
2.5 kls. each Concrete nails (1 1/2 inch) and (3”)

25 pcs. Pencil

5 rolls Nylon string (5 meter length)

2.5 m3 Gravel (¾ inch)

5m Sand Screen

10 pcs Ordinary Plywood (½” X 4’ X 8’)

PERSONAL PROTECTIVE EQUIPMENT (PPE)

QTY DESCRIPTION

One per trainee Safety shoes/ rubber boots (Trainee to provide)

One per trainee Proper uniform/clothing (Trainee to provide)

One per trainee Gloves (cotton) (Trainee to provide)

One per trainee Safety goggles (Trainee to provide)

25 pcs. Reflectorized vest

One per trainee Safety shoes/ rubber boots (Trainee to provide)

You might also like