Scribd
Upload
470 views1 page

Wiring Diagram Ekey Home CP DRM DoorBird Indoor Station ID371

This document provides a wiring diagram for connecting an ekey home CP DRM 2 system with 2 relays to a DoorBird door station and indoor station. It lists the pin descriptions and shows that the fingerscanner cannot be wired directly to the DoorBird system. It also notes that the relay output can trigger the input of the ekey control panel to open the door but that it is safer to use the relay output of the indoor station.

Uploaded by

joko Nuryanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
470 views1 page

Wiring Diagram Ekey Home CP DRM DoorBird Indoor Station ID371

This document provides a wiring diagram for connecting an ekey home CP DRM 2 system with 2 relays to a DoorBird door station and indoor station. It lists the pin descriptions and shows that the fingerscanner cannot be wired directly to the DoorBird system. It also notes that the relay output can trigger the input of the ekey control panel to open the door but that it is safer to use the relay output of the indoor station.

Uploaded by

joko Nuryanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ekey home CP DRM 2: 2 relays | DoorBird door station | Indoor Station

VERKABELUNGSPLAN
WIRING DIAGRAM
ID371/760: Version 1, 2021-03-18
ID371/760/0/724: Version 1, 2021-03-18

CABLE RECOMMENDATION
for ekey devices
J-Y(ST)Y with ø 0.6 or 0.8 mm

PIN DESCRIPTION
1 RS-485 (clamp 1)
2 RS-485 (clamp 2)
3 FS power supply
4 FS power supply
5 +VCC (8-24 VDC)
6 -VCC
N L
7 Relay 1 C (common)
3 4 5
Relay Output 8 Relay 1 NO (normally open)
Dry contact 9 Relay 1 NC (normally closed)
NO - 42 V/2 A
Notice:
The fingerscanner cannot
10 Input 1/2 common
11 Input 1 - dry contact!
be wired directly to the
DoorBird door station
system!

12 Input 2 - dry contact!


13 Relay 2 C (common)
Power Supply 14 Relay 2 NO (normally open)
Unit Value
VDC 8-24 + -
15 Relay 2 NC (normally closed)
off on

1 2 3 4
Notice:
The relay output can
trigger the input of the
ekey control panel to
open the door!
It is safer to use the
relay output of the
Indoor Station!

You might also like