Scribd
Upload
70 views

Mars Inland: Main Modifications

This document summarizes the key changes between different versions of BV Rules for Inland Navigation Vessels NR217 and the MARS Inland software. The latest Version 1.4 (June 2021) includes updated BV rules. Previous versions saw changes to the range of navigation, corrosion margins, buckling assessments, design loads, hull girder strength, and scantling requirements. The pressure viewer and net scantlings for non-contributing structures were also added.

Uploaded by

JESUS SULBARAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views

Mars Inland: Main Modifications

This document summarizes the key changes between different versions of BV Rules for Inland Navigation Vessels NR217 and the MARS Inland software. The latest Version 1.4 (June 2021) includes updated BV rules. Previous versions saw changes to the range of navigation, corrosion margins, buckling assessments, design loads, hull girder strength, and scantling requirements. The pressure viewer and net scantlings for non-contributing structures were also added.

Uploaded by

JESUS SULBARAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MARS INLAND

Main Modifications DV
June 2021

Version 1.4 (June, 2021)


BV Rules for Inland Navigation Vessels NR217
• BV Rules for Inland Navigation Vessels, Edition June 2021, are included.

MARS Inland General Changes


 In the Basic Ship data module:
• Range of navigation: two possible ranges of navigation IN and IN(x ≤ 2) PtA Ch1 S3 12.2
• No correction bending moment anymore

 In the Section assessments (Rule) module:


• Corrosion margin
• Aluminium and stainless steel PtB Ch2 S5 3.1.3
• Buckling and Ultimate Strength of Ordinary Stiffeners and Stiffened Panels
• Local loads PtB Ch2 S7 Symbol, hull girder wave loads PtB Ch2 S7 7.2.1 calculated at a
probability level of 10-8 for IN(x ≤ 2)
• Partial safety factors regarding uncertainties on wave loads taken equal to γW1 = γW2 =
1
• Values of safety factor SF for the vessel central part and those located elsewhere PtB
Ch2 S7 Symbol
• Ratios h/t b/t of webs and flanges PtB Ch2 S7 4.1.1
• Design loads
• A new definition of navigation coefficient: n = 0,165 Hs for IN(x ≤ 2) PtB Ch3 S1 5.2.1
• Rule still water bending moments: new formulae for cargo carriers PtB Ch3 S2 2.2/2.3
and passenger vessels PtB Ch3 S2 2.6
• Rule still water bending moments for passenger vessels extended to launches vessels
PtB Ch3 S2 2.6
• Relative motions and accelerations: distinction made between IN and IN(x ≤ 2) PtB
Ch3 S3 2.2-2.3
• External wave pressure: modified formulae for the calculation of wave pressure on
sides above the waterline PtB Ch3 S4 T1-T2
• Wind pressure: new requirement with revised formulae PtB Ch3 S4 T3
• Pressure on exposed decks PtB Ch3 S4 2.2.1
• Hull girder strength analysis
• Length-to-depth ratio PtB Ch4 S1 1.2
• Hull girder strength in steel and aluminium PtB Ch4 S1 4.2.1
• Hull scantlings PtB Ch5
• Minimum net thickness for plating and stiffener web, taking into account k0k
• Scantling of plating and stiffeners in aluminium
• Alternative scantling requirements applicable to vessels with rule length L < 40 m
• Other structures PtB Ch6
• Buckling strength check in steel and aluminium
Bureau Veritas – MARS2000 Main Modifications – M005

Version 1.3a (Sept. 18th, 2019)


BV Rules for Inland Navigation Vessels NR217
• Version 1.3a corresponds to BV Rules for Inland Navigation Vessels, Edition February 2019.

MARS Inland General Changes


 In the Section assessments (Rule) module:
• Pressure viewer is now available.
• Net scantlings for non-contributing superstructures and deckhouses PtB Ch6 S4 T8

Version 1.3 (April 2nd, 2019)


BV Rules for Inland Navigation Vessels NR217
• BV Rules for Inland Navigation Vessels, Edition February 2019, were included.

MARS Inland General Changes


 In the Section assessments (Rule) module:
• Default T1 : implementation of new value of default T1 associated with lightship condition PtB
Ch3 S1 2.4.3
• Combination of wave local loads + wave hull girder loads Pt B Ch3 S1 4.7
• Hull girder wave loads:
• Updating vertical wave bending moment for IN(0.6 < x <= 2) PtB Ch3 S2 4.1
• New horizontal wave bending moment PtB, Ch3 S2 4.2
• Vessel motions and accelerations:
• Updating vessel absolute motions and accelerations PtB Ch3 S3 2.1
• Updating vessel relative motions PtB Ch3 S3 2.2
• Local loads:
• Updating external design pressure PtB Ch3 S4 2
• Updating internal design pressure PtB Ch3 S4 3
• Scantlings of vessels assigned with the navigation notation Estuary Plus PtD Ch2 S13

 In the Transverse Bulkhead Arrangement (Rule) module:


• Some of the relevant above-mentioned items are also implemented.

Older versions
For information on older versions, do not hesitate in contacting us at:
[email protected]

2/2

You might also like