Assignment 2 Chbyshev Filter (21-MS-TE-05)
Assignment 2 Chbyshev Filter (21-MS-TE-05)
[email protected] [email protected]
21-MS-TE-05
Assignment #02
SOLUTION
QUESTION #01
Chebyshev filters are nothing but analog or digital filters. These filters have a steeper roll off &
type-1 filter (more pass band ripple) or type-2 filter (stop band ripple) than Butterworth filters.
The property of this filter is, it reduces the error between the characteristic of the actual and
idealized filter.
The Chebyshev response is a mathematical strategy for achieving a faster roll-off by allowing
ripple in the frequency response. Analog and digital filters that use this approach are called
Chebyshev filters.
Accordingly is widely used in RF applications where a steep transition between pass-band and
stop-band is required to remove unwanted products such as intermodulation of harmonics.
Ripple: Although the Chebyshev filter provides a steep roll-off, this is at the cost of ripple.
This is the circuit diagram of chebyshev band pass filter designed in ADS software with start frequency
of 2.5GHZ and the central frequency of 6 GHZ with Z0 =50 ohm using lambed elements
Simulation Results
Figure shows the initial simulation result, where as it can be seen the frequency response of the
It is when we call S11 the return loss that we introduce confusion. Return loss is in dB and is
always positive. S11, in dB, is always negative. While the two terms are related as S11[dB] = -
RL, they are not the same, and their behaviors are opposite. The following result is in s11 and
s21
The insertion loss S (2,1) and return loss S (1,1) that have been obtained for the Chebyshev filter
are
illustrated in the following Fig.
The s parameters result in smith chart
Following results are in the list form; these are defined in s11, s22 and in frequencies
Status and summary of work