CAR CARE PRODUCTS FORMULATIONS

CAR CARE

PRODUCTS

FORMULATIONS
 INDEX
TOUCHLESS AND BRUSHLESS
CAR WASH FOAM SHAMPOO

FORMULATIONS AND MANUFACTURING PROCESS

1 – TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 1

2 – TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 2

3 – TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 3

4 – TOUCHLESS AND BRUSHLESS CAR WASH FOAM

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 4

5 – TOUCHLESS / BRUSHLESS AND SOLVENT BASED

CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

6 – TOUCHLESS / BRUSHLESS AND SOLVENT BASED

CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

7 – TOUCHLESS / BRUSHLESS AND SOLVENT BASED

CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

8 – TOUCHLESS / BRUSHLESS AND SOLVENT BASED

CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

9 – TOUCHLESS / BRUSHLESS AMMONIA BASED

CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

10 – TOUCHLESS / BRUSHLESS AMMONIA BASED

CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

11 – TOUCHLESS / BRUSHLESS AMMONIA BASED

CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

12 – TOUCHLESS / BRUSHLESS AMMONIA BASED

CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

13 –TOUCHLESS / BRUSHLESS SOLVENT AND AMMONIA

BASED CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

14 –TOUCHLESS / BRUSHLESS SOLVENT AND AMMONIA

BASED CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

15 –TOUCHLESS / BRUSHLESS SOLVENT AND AMMONIA

BASED CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

16 –TOUCHLESS / BRUSHLESS SOLVENT AND AMMONIA

BASED CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

17 –TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM POLISH

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 1

18 –TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM POLISH

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 2

19 –TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM POLISH

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 3

20 –TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM POLISH

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 4

21 –TOUCHLESS AND BRUSHLESS SOLVENT BASED

CAR WASH SNOW FOAM POLISH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

22 –TOUCHLESS AND BRUSHLESS SOLVENT BASED

CAR WASH SNOW FOAM POLISH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

23 –TOUCHLESS AND BRUSHLESS SOLVENT BASED

CAR WASH SNOW FOAM POLISH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

24 –TOUCHLESS AND BRUSHLESS SOLVENT BASED

CAR WASH SNOW FOAM POLISH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

25 – COLOR FOAM TOUCHLESS AND BRUSHLESS CAR WASH

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 1

26 – COLOR FOAM TOUCHLESS AND BRUSHLESS CAR WASH

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 2

27 – COLOR FOAM TOUCHLESS AND BRUSHLESS CAR WASH

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 3

28 – COLOR FOAM TOUCHLESS AND BRUSHLESS CAR WASH

SHAMPOO FORMULATION AND PRODUCTION PROCESS – 4

29 – COLOR FOAM AND POLISH ADDED TOUCHLESS AND BRUSHLESS

CAR WASH SHAMPOO FORMULATION AND PRODUCTION PROCESS – 1

30 – COLOR FOAM AND POLISH ADDED TOUCHLESS AND BRUSHLESS

CAR WASH SHAMPOO FORMULATION AND PRODUCTION PROCESS – 2

31 – COLOR FOAM AND POLISH ADDED TOUCHLESS AND BRUSHLESS

CAR WASH SHAMPOO FORMULATION AND PRODUCTION PROCESS – 3

32 – COLOR FOAM AND POLISH ADDED TOUCHLESS AND BRUSHLESS

CAR WASH SHAMPOO FORMULATION AND PRODUCTION PROCESS – 4

33 – COLOR FOAM AND SOLVENT BASED TOUCHLESS

AND BRUSHLESS CAR WASH POLISH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

34 – COLOR FOAM AND SOLVENT BASED TOUCHLESS

AND BRUSHLESS CAR WASH POLISH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

35 – COLOR FOAM AND SOLVENT BASED TOUCHLESS

AND BRUSHLESS CAR WASH POLISH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

36 – COLOR FOAM AND SOLVENT BASED TOUCHLESS

AND BRUSHLESS CAR WASH POLISH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

37 – TOUCHLESS / BRUSHLESS AND ANTI CORROSION

AGENT ADDED CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

38 – TOUCHLESS / BRUSHLESS AND ANTI CORROSION

AGENT ADDED CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

39 – TOUCHLESS / BRUSHLESS AND ANTI CORROSION

AGENT ADDED CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

40 – TOUCHLESS / BRUSHLESS AND ANTI CORROSION

AGENT ADDED CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

41 – SOLVENT AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

42 – SOLVENT AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

43 – SOLVENT AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

44 – SOLVENT AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SNOW FOAM SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

45 – COLOR FOAM AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

46 – COLOR FOAM AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

47 – COLOR FOAM AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

48 – COLOR FOAM AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

49 – POLISH AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

50 – POLISH AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

51 – POLISH AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

52 – POLISH AND ANTI CORROSION AGENT ADDED

TOUCHLESS / BRUSHLESS CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

 TOUCHLESS AND BRUSHLESS

CAR WASH FOAM DETERGENT POWDER

FORMULATIONS AND MANUFACTURING PROCESS

53 – TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM DETERGENT

POWDER FORMULATION AND PRODUCTION PROCESS – 1

54 – TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM DETERGENT

POWDER FORMULATION AND PRODUCTION PROCESS – 2

55 – TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM DETERGENT

POWDER FORMULATION AND PRODUCTION PROCESS – 3

56 – TOUCHLESS AND BRUSHLESS CAR WASH SNOW FOAM DETERGENT

POWDER FORMULATION AND PRODUCTION PROCESS – 4

57 – TOUCHLESS / BRUSHLESS AND ANTI CORROSION AGENT ADDED

CAR WASH SNOW FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 1

58 – TOUCHLESS / BRUSHLESS AND ANTI CORROSION AGENT ADDED

CAR WASH SNOW FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 2

59 – TOUCHLESS / BRUSHLESS AND ANTI CORROSION AGENT ADDED

CAR WASH SNOW FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 3

60 – TOUCHLESS / BRUSHLESS AND ANTI CORROSION AGENT ADDED

CAR WASH SNOW FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 4

61 – TOUCHLESS / BRUSHLESS AND WAX ADDED

CAR WASH SNOW FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 1

62 – TOUCHLESS / BRUSHLESS AND WAX ADDED

CAR WASH SNOW FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 2

63 – TOUCHLESS / BRUSHLESS AND WAX ADDED

CAR WASH SNOW FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 3

64 – TOUCHLESS / BRUSHLESS AND WAX ADDED

CAR WASH SNOW FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 4

65 – COLOR FOAM AND TOUCHLESS / BRUSHLESS

CAR WASH FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 1

66 – COLOR FOAM AND TOUCHLESS / BRUSHLESS

CAR WASH FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 2

67 – COLOR FOAM AND TOUCHLESS / BRUSHLESS

CAR WASH FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 3

68 – COLOR FOAM AND TOUCHLESS / BRUSHLESS

CAR WASH FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 4

69 – COLOR FOAM AND POLISH AGENT ADDED TOUCHLESS

AND BRUSHLESS CAR WASH FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 1

70 – COLOR FOAM AND WAX ADDED TOUCHLESS

AND BRUSHLESS CAR WASH FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 2

71 – COLOR FOAM AND WAX ADDED TOUCHLESS

AND BRUSHLESS CAR WASH FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 3

72 – COLOR FOAM AND WAX ADDED TOUCHLESS

AND BRUSHLESS CAR WASH FOAM DETERGENT POWDER

FORMULATION AND PRODUCTION PROCESS – 4

CONCENTRATED CAR WASHING SHAMPOO

FORMULATIONS AND MANUFACTURING PROCESS

73 - CONCENTRATED CAR WASHING SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

74 - CONCENTRATED CAR WASHING SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

75 - CONCENTRATED CAR WASHING SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

76 - CONCENTRATED CAR WASHING SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

77 - CONCENTRATED AND WAX ADDED CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 1

78 - CONCENTRATED AND WAX ADDED CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 2

79 - CONCENTRATED AND WAX ADDED CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 3

80 - CONCENTRATED AND WAX ADDED CAR WASH SHAMPOO

FORMULATION AND PRODUCTION PROCESS – 4

CAR ENGINE CLEANER AND DEGREASER

FORMULATIONS AND MANUFACTURING PROCESSES

81 – CAR ENGINE CLEANER AND DEGREASER FOAM

FORMULATION AND PRODUCTION PROCESS – 1

82 – CAR ENGINE CLEANER AND DEGREASER FOAM

FORMULATION AND PRODUCTION PROCESS – 2

83 – CAR ENGINE CLEANER AND DEGREASER FOAM

FORMULATION AND PRODUCTION PROCESS – 3

84 – FOAMING AND SOLVENT BASED CAR ENGINE CLEANER AND

DEGREASER FORMULATION AND PRODUCTION PROCESS – 1

85 – FOAMING AND SOLVENT BASED CAR ENGINE CLEANER AND

DEGREASER FORMULATION AND PRODUCTION PROCESS – 2

86 – FOAMING AND SOLVENT BASED CAR ENGINE CLEANER AND

DEGREASER FORMULATION AND PRODUCTION PROCESS – 3

87 – CAR ENGINE CLEANER AND DEGREASER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

88 – CAR ENGINE CLEANER AND DEGREASER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

89 – CAR ENGINE CLEANER AND DEGREASER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

CAR WHEEL CLEANER AND POLISHER PRODUCTS

FORMULATIONS AND MANUFACTURING PROCESSES

90 – CONCENTRATED ACIDIC AND FOAMING CAR WHEEL CLEANER

AND POLISHER FORMULATION AND PRODUCTION PROCESS – 1

91 – CONCENTRATED ACIDIC AND FOAMING CAR WHEEL CLEANER

AND POLISHER FORMULATION AND PRODUCTION PROCESS – 2

92 – CONCENTRATED ACIDIC AND FOAMING CAR WHEEL CLEANER

AND POLISHER FORMULATION AND PRODUCTION PROCESS – 3

93 – ACIDIC AND FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

94 – ACIDIC AND FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

95 – ACIDIC AND FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

96 – CONCENTRATED ALKALINE AND FOAMING CAR WHEEL CLEANER

AND POLISHER FORMULATION AND PRODUCTION PROCESS – 1

97 – CONCENTRATED ALKALINE AND FOAMING CAR WHEEL CLEANER

AND POLISHER FORMULATION AND PRODUCTION PROCESS – 2

98 – CONCENTRATED ALKALINE AND FOAMING CAR WHEEL CLEANER

AND POLISHER FORMULATION AND PRODUCTION PROCESS – 3

99 – ALKALINE AND FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

100 – ALKALINE AND FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

101 – ALKALINE AND FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

102 – CONCENTRATED ACIDIC AND NON - FOAMING CAR WHEEL CLEANER

AND POLISHER FORMULATION AND PRODUCTION PROCESS – 1

103 – CONCENTRATED ACIDIC AND NON - FOAMING CAR WHEEL CLEANER

AND POLISHER FORMULATION AND PRODUCTION PROCESS – 2

104 – CONCENTRATED ACIDIC AND NON - FOAMING CAR WHEEL CLEANER

AND POLISHER FORMULATION AND PRODUCTION PROCESS – 3

105 – ACIDIC AND NON - FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

106 – ACIDIC AND NON - FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

107 – ACIDIC AND NON - FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

108 – CONCENTRATED NEUTRAL AND NON - FOAMING

CAR WHEEL CLEANER AND POLISHER

FORMULATION AND PRODUCTION PROCESS – 1

109 – CONCENTRATED NEUTRAL AND NON - FOAMING

CAR WHEEL CLEANER AND POLISHER

FORMULATION AND PRODUCTION PROCESS – 2

110 – CONCENTRATED NEUTRAL AND NON - FOAMING

CAR WHEEL CLEANER AND POLISHER

FORMULATION AND PRODUCTION PROCESS – 3

111 – NEUTRAL AND NON - FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

112 – NEUTRAL AND NON - FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

113 – NEUTRAL AND NON - FOAMING CAR WHEEL CLEANER AND POLISHER

GASEOUS ( AEROSOL ) AND NON – GASEOUS SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

CAR TYRE SHİNER OR CAR TYRE POLISHER PRODUCTS

FORMULATIONS AND MANUFACTURING PROCESS

114 – SILICONE BASED AND CONCENTRATED CAR TYRE SHINE

CREAM FORMULATION AND PRODUCTION PROCESS – 1

115 – SILICONE BASED AND CONCENTRATED CAR TYRE SHINE

CREAM FORMULATION AND PRODUCTION PROCESS – 2

116 – SILICONE BASED AND CONCENTRATED CAR TYRE SHINE

CREAM FORMULATION AND PRODUCTION PROCESS – 3

117 – SILICONE CAR TYRE SHINE SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

118 – SILICONE CAR TYRE SHINE SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

119 – SILICONE CAR TYRE SHINE SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

120 – SILICONE AND GLYCERINE BASED CAR TYRE SHINE

CREAM FORMULATION AND PRODUCTION PROCESS – 1

121 – SILICONE AND GLYCERINE BASED CAR TYRE SHINE

CREAM FORMULATION AND PRODUCTION PROCESS – 2

122 – SILICONE AND GLYCERINE BASED CAR TYRE SHINE

CREAM FORMULATION AND PRODUCTION PROCESS – 3

123 – SILICONE AND GLYCERINE BASED CAR TYRE SHINE

SPRAY FORMULATION AND PRODUCTION PROCESS – 1

124 – SILICONE AND GLYCERINE BASED CAR TYRE SHINE

SPRAY FORMULATION AND PRODUCTION PROCESS – 2

125 – SILICONE AND GLYCERINE BASED CAR TYRE SHINE

SPRAY FORMULATION AND PRODUCTION PROCESS – 3

126 – CONCENTRATED CAR TYRE POLISHER GEL

FORMULATION AND PRODUCTION PROCESS – 1

127 – CONCENTRATED CAR TYRE POLISHER GEL

FORMULATION AND PRODUCTION PROCESS – 2

128 – CONCENTRATED CAR TYRE POLISHER GEL

FORMULATION AND PRODUCTION PROCESS – 3

129 – CAR TYRE POLISHER SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

130 – CAR TYRE POLISHER SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

131 – CAR TYRE POLISHER SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

CAR INTERIOR CLEANING PRODUCTS

FORMULATIONS AND MANUFACTURING PROCESS

132 – CONCENTRATED CAR INTERIOR CLEANER

FORMULATION AND PRODUCTION PROCESS – 1

133 – CONCENTRATED CAR INTERIOR CLEANER

FORMULATION AND PRODUCTION PROCESS – 2

134 – CONCENTRATED CAR INTERIOR CLEANER

FORMULATION AND PRODUCTION PROCESS – 3

135 – CONCENTRATED AND SOLVENT ADDED CAR INTERIOR CLEANER

FORMULATION AND PRODUCTION PROCESS – 1

136 – CONCENTRATED AND SOLVENT ADDED CAR INTERIOR CLEANER

FORMULATION AND PRODUCTION PROCESS – 2

137 – CONCENTRATED AND SOLVENT ADDED CAR INTERIOR CLEANER

FORMULATION AND PRODUCTION PROCESS – 3

138 – CAR INTERIOR CLEANING SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

139 – CAR INTERIOR CLEANING SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

140 – CAR INTERIOR CLEANING SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

141 – SOLVENT BASED CAR INTERIOR CLEANING SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

142 – SOLVENT BASED CAR INTERIOR CLEANING SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

143 – SOLVENT BASED CAR INTERIOR CLEANING SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

CONCENTRATED CAR DASHBOARD SILICONE WAX CREAM

FORMULATIONS AND MANUFACTURING PROCESS

144 – CONCENTRATED CAR DASHBOARD SILICONE WAX CREAM

FORMULATION AND PRODUCTION PROCESS – 1

145 – CONCENTRATED CAR DASHBOARD SILICONE WAX CREAM

FORMULATION AND PRODUCTION PROCESS – 2

146 – CONCENTRATED CAR DASHBOARD SILICONE WAX CREAM

FORMULATION AND PRODUCTION PROCESS – 3

147 – CONCENTRATED AND PERFUME ADDED

CAR DASHBOARD SILICONE WAX CREAM

FORMULATION AND PRODUCTION PROCESS – 1

148 – CONCENTRATED AND PERFUME ADDED

CAR DASHBOARD SILICONE WAX CREAM

FORMULATION AND PRODUCTION PROCESS – 2

149 – CONCENTRATED AND PERFUME ADDED

CAR DASHBOARD SILICONE WAX CREAM

FORMULATION AND PRODUCTION PROCESS – 3

150 – CONCENTRATED CAR DASHBOARD LIQUID POLISH

FORMULATION AND PRODUCTION PROCESS – 1

151 – CONCENTRATED CAR DASHBOARD LIQUID POLISH

FORMULATION AND PRODUCTION PROCESS – 2

152 – CONCENTRATED CAR DASHBOARD LIQUID POLISH

FORMULATION AND PRODUCTION PROCESS – 3

153 – CONCENTRATED AND PERFUME ADDED

CAR DASHBOARD LIQUID POLISH SILICONE

FORMULATION AND PRODUCTION PROCESS – 1

154 – CONCENTRATED AND PERFUME ADDED

CAR DASHBOARD LIQUID POLISH SILICONE

FORMULATION AND PRODUCTION PROCESS – 2

155 – CONCENTRATED AND PERFUME ADDED

CAR DASHBOARD LIQUID POLISH SILICONE

FORMULATION AND PRODUCTION PROCESS – 3

156 – CAR DASHBOARD POLISH SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

157 – CAR DASHBOARD POLISH SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

158 – CAR DASHBOARD POLISH SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

159 – CAR DASHBOARD PERFUME ADDED POLISH SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

160 – CAR DASHBOARD PERFUME ADDED POLISH SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

161 – CAR DASHBOARD PERFUME ADDED POLISH SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

CAR PERFUMES

FORMULATIONS AND MANUFACTURING PROCESS

162 – CAR PERFUME BOTTLE FORMULATION

AND PRODUCTION PROCESS – 1

163 – CAR PERFUME BOTTLE FORMULATION

AND PRODUCTION PROCESS – 2

164 – CAR PERFUME BOTTLE FORMULATION

AND PRODUCTION PROCESS – 3

165 – CAR PERFUME SPRAY FORMULATION

AND PRODUCTION PROCESS – 1

166 – CAR PERFUME SPRAY FORMULATION

AND PRODUCTION PROCESS – 2

167 – CAR PERFUME SPRAY FORMULATION

AND PRODUCTION PROCESS – 3

168 – HANDING PAPER CAR PERFUME

FORMULATION AND PRODUCTION PROCESS – 1

169 – HANDING PAPER CAR PERFUME

FORMULATION AND PRODUCTION PROCESS – 2

170 – HANDING PAPER CAR PERFUME

FORMULATION AND PRODUCTION PROCESS – 3

171 – CAR PERFUME GEL FORMULATION

AND PRODUCTION PROCESS – 1

172 – CAR PERFUME GEL FORMULATION

AND PRODUCTION PROCESS – 2

173 – CAR PERFUME GEL FORMULATION

AND PRODUCTION PROCESS – 3

HEADLIGH LENS CLEANER AND RESTORER PRODUCTS

FORMULATION AND MANUFACTURING PROCESS

174 – HEADLIGHT LENS CLEANER AND RESTORER CREAM

FORMULATION AND PRODUCTION PROCESS – 1

175 – HEADLIGHT LENS CLEANER AND RESTORER CREAM

FORMULATION AND PRODUCTION PROCESS – 2

176 – HEADLIGHT LENS CLEANER AND RESTORER CREAM

FORMULATION AND PRODUCTION PROCESS – 3

177 – HEADLIGHT LENS CLEANER AND RESTORER PASTE

FORMULATION AND PRODUCTION PROCESS – 1

178 – HEADLIGHT LENS CLEANER AND RESTORER PASTE

FORMULATION AND PRODUCTION PROCESS – 2

179 – HEADLIGHT LENS CLEANER AND RESTORER PASTE

FORMULATION AND PRODUCTION PROCESS – 3

180 – HEADLIGHT LENS CLEANER AND RESTORER SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

181 – HEADLIGHT LENS CLEANER AND RESTORER SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

182 – HEADLIGHT LENS CLEANER AND RESTORER SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

CAR SCRATCH REMOVER

FORMULATION AND MANUFACTURING PROCESS

183 – CAR THIN SCRATCH REMOVER AND WAX

FORMULATION AND PRODUCTION PROCESS – 1

184 – CAR THIN SCRATCH REMOVER AND WAX

FORMULATION AND PRODUCTION PROCESS – 2

185 – CAR THIN SCRATCH REMOVER AND WAX

FORMULATION AND PRODUCTION PROCESS – 3

186 – CAR THICK SCRATCH REMOVER AND WAX

FORMULATION AND PRODUCTION PROCESS – 1

187 – CAR THICK SCRATCH REMOVER AND WAX

FORMULATION AND PRODUCTION PROCESS – 2

188 – CAR THICK SCRATCH REMOVER AND WAX

FORMULATION AND PRODUCTION PROCESS – 3

WINDSHIELD DE – ICER PRODUCTS

FORMULATIONS AND MANUFACTURING PROCESS

189 – CONCENTRATED WINDSHIELD DE – ICER

FORMULATION AND PRODUCTION PROCESS – 1

190 – CONCENTRATED WINDSHIELD DE – ICER

FORMULATION AND PRODUCTION PROCESS – 2

191 – CONCENTRATED WINDSHIELD DE – ICER

FORMULATION AND PRODUCTION PROCESS – 3

192 – CONCENTRATED WINDSHIELD DE – ICER

FORMULATION AND PRODUCTION PROCESS – 4

193 – WINDSHIELD DE – ICER SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

194 – WINDSHIELD DE – ICER SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

195 – WINDSHIELD DE – ICER SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

196 – WINDSHIELD DE – ICER SPRAY

FORMULATION AND PRODUCTION PROCESS – 4

CAR AIR CONDITIONING DISINFECTANT AND CLEANER

FORMULATIONS AND MANUFACTURING PROCESS

197 – CONCENTRATED CAR AIR CONDITIONING DISINFECTANT AND

CLEANER FORMULATION AND PRODUCTION PROCESS – 1

198 – CONCENTRATED CAR AIR CONDITIONING DISINFECTANT AND

CLEANER FORMULATION AND PRODUCTION PROCESS – 2

199 – CONCENTRATED CAR AIR CONDITIONING DISINFECTANT AND

CLEANER FORMULATION AND PRODUCTION PROCESS – 3

200 – CAR AIR CONDITIONING DISINFECTANT AND CLEANER SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

201 – CAR AIR CONDITIONING DISINFECTANT AND CLEANER SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

202 – CAR AIR CONDITIONING DISINFECTANT AND CLEANER SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

203 – CAR AIR CONDITIONING DISINFECTANT AND CLEANER FOAM

FORMULATION AND PRODUCTION PROCESS – 1

204 – CAR AIR CONDITIONING DISINFECTANT AND CLEANER FOAM

FORMULATION AND PRODUCTION PROCESS – 2

205 – CAR AIR CONDITIONING DISINFECTANT AND CLEANER FOAM

FORMULATION AND PRODUCTION PROCESS – 3

ANTIFOG PRODUCTS

FORMULATIONS AND MANUFACTURING PROCESS

206 – CONCENTRATED ANTIFOG FLUID

FORMULATION AND PRODUCTION PROCESS – 1

207 – CONCENTRATED ANTIFOG FLUID

FORMULATION AND PRODUCTION PROCESS – 2

208 – CONCENTRATED ANTIFOG FLUID

FORMULATION AND PRODUCTION PROCESS – 3

209 – ANTIFOG SPRAY FORMULATION

AND PRODUCTION PROCESS – 1

210 – ANTIFOG SPRAY FORMULATION

AND PRODUCTION PROCESS – 2

211 – ANTIFOG SPRAY FORMULATION

AND PRODUCTION PROCESS – 3

212 – ANTIFOG GEL FORMULATION

AND PRODUCTION PROCESS – 1

213 – ANTIFOG GEL FORMULATION

AND PRODUCTION PROCESS – 2

214 – ANTIFOG GEL FORMULATION

AND PRODUCTION PROCESS – 3

CAR QUICK POLISH PRODUCTS

FORMULATIONS AND MANUFACTURING PROCESS

215 – CONCENTRATED CAR QUICK POLISH FLUID

FORMULATION AND PRODUCTION PROCESS – 1

216 – CONCENTRATED CAR QUICK POLISH FLUID

FORMULATION AND PRODUCTION PROCESS – 2

217 – CONCENTRATED CAR QUICK POLISH FLUID

FORMULATION AND PRODUCTION PROCESS – 3

218 – CAR QUICK POLISH FORMULATION

AND PRODUCTION PROCESS – 1

219 – CAR QUICK POLISH FORMULATION

AND PRODUCTION PROCESS – 2

220 – CAR QUICK POLISH FORMULATION

AND PRODUCTION PROCESS – 3

VEHICLE COOLANT / ANTIFREEZE PRODUCTS

FORMULATIONS AND MANUFACTURING PROCESS

221 – CONCENTRATED CAR COOLANT / ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 1

222 – CONCENTRATED CAR COOLANT / ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 2

223 – CONCENTRATED CAR COOLANT / ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 3

224 – CONCENTRATED CAR COOLANT / ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 4

225 – CAR COOLANT / ANTIFREEZE ( READY TO USE )

FORMULATION AND PRODUCTION PROCESS – 1

226 – CAR COOLANT / ANTIFREEZE ( READY TO USE )

FORMULATION AND PRODUCTION PROCESS – 2

227 – CAR COOLANT / ANTIFREEZE ( READY TO USE )

FORMULATION AND PRODUCTION PROCESS – 3

228 – CAR COOLANT / ANTIFREEZE ( READY TO USE )

FORMULATION AND PRODUCTION PROCESS – 4

229 – BORON BASED AND READY TO USE CAR COOLANT / ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 1

230 – BORON BASED AND READY TO USE CAR COOLANT / ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 2

231 – BORON BASED AND READY TO USE CAR COOLANT / ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 3

232 – BORON BASED AND READY TO USE CAR COOLANT / ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 4

 CAR WINDSHIELD WASHER FLUID

FORMULATIONS AND MANUFACTURING PROCESS

233 – CONCENTRATED CAR WINDSHIELD WASHER FLUID

FORMULATION AND PRODUCTION PROCESS – 1

( FOR WARMER WEATHER )

234 – CONCENTRATED CAR WINDSHIELD WASHER FLUID

FORMULATION AND PRODUCTION PROCESS – 2

( FOR WARMER WEATHER )

235 – CONCENTRATED CAR WINDSHIELD WASHER FLUID

FORMULATION AND PRODUCTION PROCESS – 3

( FOR WARMER WEATHER )

236 – CAR WINDSHIELD WASHER FLUID

FORMULATION AND PRODUCTION PROCESS – 1

( READY TO USE AND FOR WARMER WEATHER )

237 – CAR WINDSHIELD WASHER FLUID

FORMULATION AND PRODUCTION PROCESS – 2

( READY TO USE AND FOR WARMER WEATHER )

238 – CAR WINDSHIELD WASHER FLUID

FORMULATION AND PRODUCTION PROCESS – 3

( READY TO USE AND FOR WARMER WEATHER )

239 – CAR WINDSHIELD WASHER ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 1

( USING MILD WEATHER IN WINTER )

240 – CAR WINDSHIELD WASHER ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 2

( USING MILD WEATHER IN WINTER )

241 – CAR WINDSHIELD WASHER ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 3

( USING MILD WEATHER IN WINTER )

242 – CAR WINDSHIELD WASHER ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 1

( USING COLD WEATHER IN WINTER )

243 – CAR WINDSHIELD WASHER ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 2

( USING COLD WEATHER IN WINTER )

244 – CAR WINDSHIELD WASHER ANTIFREEZE

FORMULATION AND PRODUCTION PROCESS – 3

( USING COLD WEATHER IN WINTER )

RADIATOR FLUSH AND CLEANER PRODUCTS

FORMULTIONS AND MANUFACTURING PROCESS

245 – CONCENTRATED RADIATOR FLUSH AND CLEANER FLUID

FORMULATION AND PRODUCTION PROCESS – 1

246 – CONCENTRATED RADIATOR FLUSH AND CLEANER FLUID

FORMULATION AND PRODUCTION PROCESS – 2

247 – CONCENTRATED RADIATOR FLUSH AND CLEANER FLUID

FORMULATION AND PRODUCTION PROCESS – 3

248 – RADIATOR FLUSH AND CLEANER FLUID

FORMULATION AND PRODUCTION PROCESS – 1

( READY TO USE )

249 – RADIATOR FLUSH AND CLEANER FLUID

FORMULATION AND PRODUCTION PROCESS – 2

( READY TO USE )

250 – RADIATOR FLUSH AND CLEANER FLUID

FORMULATION AND PRODUCTION PROCESS – 3

( READY TO USE )

RADIATOR CORROSION INHIBITOR

FORMULATIONS AND MANUFACTURING PROCESS

251 – CONCENTRATED RADIATOR CORROSION INHIBITOR

FORMULATION AND PRODUCTION PROCESS – 1

252 – CONCENTRATED RADIATOR CORROSION INHIBITOR

FORMULATION AND PRODUCTION PROCESS – 2

253 – CONCENTRATED RADIATOR CORROSION INHIBITOR

FORMULATION AND PRODUCTION PROCESS – 3

ADBLUE UREA SOLUTION

FORMULATIONS AND MANUFACTURING PROCESS

254 – ADBLUE UREA SOLUTION FORMULATION

AND PRODUCTION PROCESS – 1

255 – ADBLUE UREA SOLUTION FORMULATION

AND PRODUCTION PROCESS – 2

 CAR WINDSHIELD RAIN REPELLENT PRODUCTS

FORMULATIONS AND MANUFACTURING PROCESS

256 – CONCENTRATED WINDSHIELD RAIN REPELLENT FLUID

FORMULATION AND PRODUCTION PROCESS – 1

257 – CONCENTRATED WINDSHIELD RAIN REPELLENT FLUID

FORMULATION AND PRODUCTION PROCESS – 2

258 – CONCENTRATED WINDSHIELD RAIN REPELLENT FLUID

FORMULATION AND PRODUCTION PROCESS – 3

259 – WINDSHIELD RAIN REPELLENT SPRAY

FORMULATION AND PRODUCTION PROCESS – 1

260 – WINDSHIELD RAIN REPELLENT SPRAY

FORMULATION AND PRODUCTION PROCESS – 2

261 – WINDSHIELD RAIN REPELLENT SPRAY

FORMULATION AND PRODUCTION PROCESS – 3

FUEL ENJECTOR CLEANER PRODUCTS

FORMULATIONS AND MANUFACTURING PROCESS

262 – FUEL ENJECTOR CLEANER FLUID

FORMULATION AND PRODUCTION PROCESS – 1

263 – FUEL ENJECTOR CLEANER FLUID

FORMULATION AND PRODUCTION PROCESS – 2

 SOME CHEMICALS ( INGREDIENTS )

FOR CARE CARE PRODUCTIONS

A
264 – ACETYLATED LANOLIN

266 – ACNIBIO AC

268 – ACNIBIO AP

270 – ALKYL POLYGLUCOSIDE

272 – AMARANTH ( E 123 )

274 – AMINO TRIMETHYLENE PHOSPHORIC ACID ( ATMP )

276 – AMMONIUM HYDROXIDE ( AQUEOUS AMMONİA )

278 – AMMONIUM BICARBONATE

280 – AMMONIUM CHLORIDE

282 – AMMONIUM LAURYL ETHER SULPHATE ( ALES )

284 – AMMONIUM LAURYL SULFATE ( % 28 )

286 – ACETIC ACID

288 – ACETONE

B
290 – BARITE ( MINERAL )

292 – BEESWAX

294 – BENZALDEHYDE

296 – BENZALKONIUM CHLORIDE

298 – BENZYL ALCOHOL

300 – BENZOTRIAZOLE

302 – BIS PEG 1 DIMETHICONE

304 – BIS PEG 20 DIMETHICONE

306 – BORAX

308 – BORIC ACID

310 – BUTYLENE GLYCOL

312 – BUTYL HYDROXY TOLUENE ( BHT )

C
314 – CALCITE

316 - CALCIUM HYDROXIDE

318 - CALCIUM HYPOCHLORIDE

320 – CALCIUMCHLORIDE

322 - CALCIUM SILICATE

324 - CALCIUM SULFATE

326 – CAPRYLYL CAPRYL GLUCOSIDE

328 – CARRAGEENAN

330 – CARBOXYMETHYL CELLULOSE ( CMC )

332 – CARMOISINE

334 – CARNAUBA WAX

336 – CETEARETH 11

338 – CETEARETH 20

340 – CETRIMONIUM CHLORIDE

342 – CHOCOLATE BROWN HT

344 – CINNAMYL ALCOHOL

346 – CLIMBAZOLE

348 – COCAMIDOPROPYL BETAINE

350 – COCAMIDE DEA

352 – COCAMIDE MEA

354 – CYCLOMETHICONE
356 – CYCLOPENTASILOXANE

358 – C10 – 8 EO ALCOHOL ETHOXYLATE

360 – C10 – 3 EO ALCOHOL ETHOXYLATE

362 – C13 – 8 EO ALCOHOL ETHOXYLATE

364 – C 30 – 45 ALKYL METHICONE

D
366 – DECYL GLUCOSIDE

368 – DECYL OLEATE

370 – DECYLAMINE OXIDE

372 – DI C12 – 13 ALKYL MALATE

374 – DIDECYL DIMETHYL AMMONIUM CHLORIDE

376 – DIETHANOLAMINE DEA

378 – DIETHYLENE GLYCOL

380 – DIETHYLHYDROXYLAMINE ( DEHA )

382 – DIMETHICONE

384 – DIOCTYL ETHER

386 – DIOCTYL DIMETHYL AMMONIUM CHLORIDE

388 – DIOCTYL SODIUM SULFOSUCCINATE

390 – DIPROPYLENE GLYCOL

392 – DISODIUM COCOAMPHODIACETATE

394 – DISODIUM LAURETH SULFOSUCCINATE

396 – DMDM HYDANTOIN

398 – D – PANTHENOL

400 – DOLOMITE

E
402 – EDTA
404 – ESTERQUAT

406 – ETHYL ALCOHOL

408 – ETHYL ACETATE

410 – ETHYL PARABEN

F
412 – FORMALDEHYDE

G
414 – GLYCERINE

416 – GLYCERYL MONOOLEATE

418 – GLYCERYL MONOSTEARATE

420 – GUAR GUM

H
422 – HYDRAZINE

424 – HYDROFLUORIC ACID

426 – HYDROCHLORIC ACID

428 – HYDROGEN PEROXIDE

430 – HYDROXYPROPYL METHYLCELLULOSE

I
432 - ISOPROPYL ALCOHOL ( IPA )

434 – ISOBUTYL ALCOHOL

436 – ISOPROPYL ACETATE

L
438 - LINEAR ALKYLBENZENE SULFONIC ACID ( LABSA )

440 - LAKE ALLURA RED AC

442 – LAKE AMARANTH

444 – LAKE PONCEAU 4R

446 – LAURYL BETAINE ( POWDER )

448 – LAURYL BETAINE ( LIQUID )

450 – LAURYL GLUCOSIDE

452 – LAURYLDIMETHYLAMINE OXIDE

454 – LIQUID PARAFFIN

M
456 – MAGNESIUM HYDROXIDE ( POWDER )

458 – MAGNESIUM HYDROXIDE ( LIQUID )

460 – MAGNESIUM CARBONATE

462 – MAGNESIUM CHLORIDE

464 – MAGNESIUM LAURETH SULFATE

466 – MAGNESIUM OXIDE

468 – MAGNESIUM SILICATE

470 – MAGNESIUM SULFATE MONOHYDRATE

472 – MENTHOL

474 – METHYLISOTHIAZOLINONE

476 – METHYL ALCOHOL

478 – METHYL BENZOATE

480 – METHYL ETHYL KETONE

482 – METHYL PARABEN

484 – MONOETHANOLAMINE ( MEA )

486 – MONOETHYLENE GLYCOL ( MEG )

488 – MONOPROPYLENE GLYCOL

N
490 – NITRIC ACID

492 – NONYLPHENOL ETHOXYLATE ( NP: 6 )

494 – NONYLPHENOL ETHOXYLATE ( NP: 10 )

O
496 – OCTYDODECANOL

498 – OLEIC ACID

P
500 – PEA GREEN

502 – PEG 400 POLYETHYLENE GLYCOL

504 – PEG 40 HYDROGENATED CASTOR OIL

506 – PEG 40 STEARATE

508 – PEG 75 – ETOXYLATED LANOLIN

510 – PHOSPHORIC ACID

512 – POLYSORBATE 20

514 – POLYQUATERNIUM 7

516 – POTASSIUM ACETATE

518 – POTASSIUM HYDROXIDE

520 – POTASSIUM CHLORIDE

522 – POTASSIUM SULFATE

524 – POTASSIUM TRIPOLYPHOSPHATE

S
526 – SODIUM ALPHA OLEFIN SULFONATE

528 – SODIUM HEGZAMETAPHOSPHATE ( SHMP )

530 – SODIUM HYDROXIDE

532 – SODIUM HYPOCHLORIDE

534 – SODIUM CARBONATE

536 – SODIUM LAURYL ETHER SULFATE ( SLES )

538 – SODIUM LAURYL SULFATE ( SLS )

540 – SODIUM METASILICATE

542 – SODIUM PERCARBONATE

544 – SODIUM SULFATE

546 – SODIUM TRIPOLYPHOSPHATE ( STPP )

548 – STEARIC ACID

550 – SULFAMIC ACID

552 – SULPHURIC ACID

554 – TARTARIC ACID

556 – TITANIUM DIOXIDE

558 – TETRAPOTASSIUM PYROPHOSPHATE

560 – TRIETHANOLAMINE ( TEA )

562 – UREA
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

TOUCHLESS
AND
BRUSHLESS

CAR WASH FOAM

SHAMPOO

LIQUID

PRODUCTION

SOLVERCHEM PUBLICATIONS
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 7
( SLES )

2 EDITRONIC ACID 2809-21-4 10

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 6.5

5 DEINOIZED WATER 7732-18-5 74.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add sodium tripolyphosphate during constant stirring. Finally,
add sodium hydroxide part to part and slowly while mixing. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 1 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 2

ACID ( LABSA )

3 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758- 29-4 2

5 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 5

6 DEINOIZED WATER 7732- 18-5 82

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and labsa. Dissolve sles and labsa in the water completely.
Add sodium tripolyphosphate and sodium hexametaphosphate during
constant stirring. Finally, add sodium hydroxide part to part and slowly
while mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 2 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 3

3 EDITRONIC ACID 2809-21-4 7

4 TETRASODIUM EDTA 10378-23-1 3

5 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 6

6 DEINOIZED WATER 7732-18-5 76

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add editronic acid and mix well. Add tetrasodium edta during constant
stirring. Finally, add sodium hydroxide part to part and slowly while
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 3 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 4

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 5

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 5

( KTPP )

4 TETRASODIUM EDTA 10378-23-1 5

5 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 5

6 DEINOIZED WATER 7732-18-5 75

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add potassium tripolyphosphate and mix well. Add tetrasodium edta
during constant stirring. Finally, add potassium hydroxide part to part
and slowly while mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 4 **
 TOUCHLESS / BRUSHLESS
SOLVENT BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 7
( SLES )

2 EDITRONIC ACID 2809-21-4 8

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 6

5 BUTYL GLYCOL 111 – 76-2 2

6 DEINOIZED WATER 7732 -18 - 5 75

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add sodium tripolyphosphate during constant stirring. Add
sodium hydroxide part to part and slowly while mixing. Stopped mixing
and Wait 1 – 2 hours. Start to mix again. Then add butyl glycol. Continue
to stirr until homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 5 **
 TOUCHLESS AND BRUSHLESS
SOLVENT BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 2

ACID ( LABSA )

3 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758- 29-4 2

5 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 6

6 ISOPROPYL ALCOHOL ( IPA ) 67-63- 0 2

7 DEINOIZED WATER 7732 – 18-5 78

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and labsa. Dissolve sles and labsa in the water completely.
Add sodium tripolyphosphate and sodium hexametaphosphate during
constant stirring. Finally, add sodium hydroxide part to part and slowly
while mixing. Stopped mixing and Wait 1 – 2 hours. Start to mix again.
Then add butyl glycol. Continue to stirr until homogenous. Homogenous
is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 6 **
 TOUCHLESS AND BRUSHLESS
SOLVENT BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 7
( SLES )

2 BUTYL GLYCOL 111 – 76-2 3

3 EDITRONIC ACID 2809-21-4 7

4 TETRASODIUM EDTA 10378-23-1 3

5 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 6

6 DEINOIZED WATER 7732-18-5 74

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles and in the water completely. Add editronic acid
and mix well. Add tetrasodium edta during constant stirring. Finally, add
sodium hydroxide part to part and slowly while mixing. Stopped mixing
and Wait 1 – 2 hours. Start to mix again. Then add butyl glycol. Continue
to stirr until homogenous. Homogenous is enough. Process is
completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 7 **
 TOUCHLESS AND BRUSHLESS
SOLVENT BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6.5
( SLES )

2 ISOPROPYL ALCOHOL ( IPA ) 61789-40-0 1.5

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 5

( KTPP )

4 TETRASODIUM EDTA 10378-23-1 5

5 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 5

6 BUTYL GLYCOL 111 – 76-2 1

7 DEINOIZED WATER 7732 -18 - 5 76

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles and in the water completely. Add potassium
tripolyphosphate and mix well. Add tetrasodium edta during constant
stirring. Finally, add potassium hydroxide part to part and slowly while
mixing. Stopped mixing and Wait 1 – 2 hours. Start to mix again. Then
add butyl glycol and isopropyl alcohol. Continue to stirr until
homogenous. Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 8 **
 TOUCHLESS / BRUSHLESS
AMMONIA BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 7
( SLES )

2 EDITRONIC ACID 2809-21-4 8

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 AMMONIUM HYDROXIDE ( % 28 ) 1336-21-6 8.5

5 DEINOIZED WATER 7732-18-5 74.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add sodium tripolyphosphate during constant stirring. Finally,
add ammonium hydroxide part to part and slowly while mixing. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 9 **
 TOUCHLESS AND BRUSHLESS
AMMONIA BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 3

ACID ( LABSA )

3 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758- 29-4 2

5 AMMONIUM HYDROXIDE ( % 28 ) 1336-21-6 7

6 DEINOIZED WATER 7732- 18-5 79

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and labsa. Dissolve sles and labsa in the water completely.
Add sodium tripolyphosphate and sodium hexametaphosphate during
constant stirring. Finally, add ammonium hydroxide part to part and
slowly while mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 10 **
 TOUCHLESS AND BRUSHLESS
AMMONIA BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 3

3 EDITRONIC ACID 2809-21-4 6

4 TETRASODIUM EDTA 10378-23-1 2

5 AMMONIUM HYDROXIDE ( % 28 ) 1336 – 21-6 9

6 DEINOIZED WATER 7732-18-5 75

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add editronic acid and mix well. Add tetrasodium edta during constant
stirring. Finally, add ammonium hydroxide part to part and slowly while
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 11 **
 TOUCHLESS AND BRUSHLESS
AMMONIA BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 2

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 6

( KTPP )

4 TETRASODIUM EDTA 10378-23-1 3

5 AMMONIUM HYDROXIDE ( % 28 ) 1336-21-6 8

6 DEINOIZED WATER 7732-18-5 75

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add potassium tripolyphosphate and mix well. Add tetrasodium edta
during constant stirring. Finally, add ammonium hydroxide part to part
and slowly while mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 12 **
 TOUCHLESS / BRUSHLESS
AMMONIA AND SOLVENT BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 EDITRONIC ACID 2809-21-4 7

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 AMMONIUM HYDROXIDE ( % 28 ) 1336-21-6 9

5 BUTYL GLYCOL 111 – 76-2 2

6 DEINOIZED WATER 7732 -18 - 5 74

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add sodium tripolyphosphate during constant stirring. Add
ammonium hydroxide part to part and slowly while mixing. Stopped
mixing and Wait 1 – 2 hours. Start to mix again. Then add butyl glycol.
Continue to stirr until homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 13 **
 TOUCHLESS AND BRUSHLESS
AMMONIA AND SOLVENT BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 2

ACID ( LABSA )

3 SODIUM HEXAMETAPHOSPHATE 10124-56-8 5

( SHMP )

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758- 29-4 2

5 AMMONIUM HYDROXIDE ( % 28 ) 1336-21-6 8

6 ISOPROPYL ALCOHOL ( IPA ) 67-63- 0 2

7 DEINOIZED WATER 7732 – 18-5 74

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and labsa. Dissolve sles and labsa in the water completely.
Add sodium tripolyphosphate and sodium hexametaphosphate during
constant stirring. Finally, add ammonium hydroxide part to part and
slowly while mixing. Stopped mixing and Wait 1 – 2 hours. Start to mix
again. Then add butyl glycol. Continue to stirr until homogenous.
Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 14 **
 TOUCHLESS AND BRUSHLESS
AMMONIA AND SOLVENT BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6.5
( SLES )

2 BUTYL GLYCOL 111 – 76-2 2

3 EDITRONIC ACID 2809-21-4 7

4 TETRASODIUM EDTA 10378-23-1 3

5 AMMONIUM HYDROXIDE ( % 28 ) 1336-21-6 9

6 DEINOIZED WATER 7732-18-5 72.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles and in the water completely. Add editronic acid
and mix well. Add tetrasodium edta during constant stirring. Finally, add
ammonium hydroxide part to part and slowly while mixing. Stopped
mixing and Wait 1 – 2 hours. Start to mix again. Then add butyl glycol.
Continue to stirr until homogenous. Homogenous is enough. Process is
completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 15 **
 TOUCHLESS AND BRUSHLESS
AMMONIA AND SOLVENT BASED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6.5
( SLES )

2 ISOPROPYL ALCOHOL ( IPA ) 61789-40-0 1

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 5

( KTPP )

4 TETRASODIUM EDTA 10378-23-1 5

5 AMMONIUM HYDROXIDE ( % 28 ) 1336-21-6 8.5

6 BUTYL GLYCOL 111 – 76-2 1

7 DEINOIZED WATER 7732 -18 - 5 73

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles and in the water completely. Add potassium
tripolyphosphate and mix well. Add tetrasodium edta during constant
stirring. Finally, add ammonium hydroxide part to part and slowly while
mixing. Stopped mixing and Wait 1 – 2 hours. Start to mix again. Then
add butyl glycol and isopropyl alcohol. Continue to stirr until
homogenous. Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 16 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 TETRASODIUM EDTA 10378-23-1 8

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 4

5 SILICONE EMULSION MIXTURE 0.5

6 DEINOIZED WATER 7732 – 18-5 79.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add tetrasodium edta
and silicone emulsion while constant mixing. Add sodium
tripolyphosphate during constant stirring. Finally, add sodium hydroxide
part to part and slowly while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 17 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 GLUCOPON 215 68515-73-1 2

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 3

5 SILICONE EMULSION MIXTURE 0.5

6 TETRASODIUM EDTA 10378-23-1 7.5

7 DEINOIZED WATER 7732-18-5 80

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add tetrasodium edta and silicone emulsion during mixing.
Add sodium tripolyphosphate during constant stirring. Finally, add
sodium hydroxide part to part and slowly while mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 18 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 4.5
( SLES )

2 GLUCOPON 215 68515-73-1 2

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 3

5 SILICONE EMULSION MIXTURE 0.5

6 TETRASODIUM EDTA 10378-23-1 7

7 COCOAMIDOPROPYL BETAINE 61789-40-0 3

8 DEINOIZED WATER 7732-18-5 78

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add betaine and stirr well. Add tetrasodium edta and silicone
emulsion during mixing. Add sodium tripolyphosphate during constant
stirring. Finally, add sodium hydroxide part to part and slowly while
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 19 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 4

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 TETRASODIUM EDTA 10378-23-1 3

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 7

( KTPP )

4 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 2

5 SILICONE EMULSION MIXTURE 0.5

6 GLUCOPON 215 68515-73-1 2.5

7 DEINOIZED WATER 7732-18-5 80

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add tetrasodium edta and silicone emulsion while constant
mixing. Add potassium tripolyphosphate during constant stirring. Finally,
add potassium hydroxide part to part and slowly while mixing. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60 to

car washing machine to wash car as touchless and brushless.

** 20 **
 TOUCHLESS AND BRUSHLESS
SOLVENT BASED
CAR WASH SNOW FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6.5
( SLES )

2 TETRASODIUM EDTA 10378-23-1 7

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 4

5 SILICONE EMULSION MIXTURE 0.5

6 BUTYL GLYCOL 111 – 76-2 2

7 DEINOIZED WATER 7732-18-5 78

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add tetrasodium edta
and silicone emulsion while constant mixing. Add sodium
tripolyphosphate during constant stirring. Finally, add sodium hydroxide
part to part and slowly while mixing. Stop mixing and wait 1 – 2 hour.
Start to stirr again. Then add butyl glycol and mix. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 21 **
 TOUCHLESS AND BRUSHLESS
SOLVENT BASED
CAR WASH SNOW FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 GLUCOPON 215 68515-73-1 2.5

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 3

5 SILICONE EMULSION MIXTURE 0.5

6 TETRASODIUM EDTA 10378-23-1 6.5

7 BUTYL GLYCOL 111-76-2 2

8 DEIONOIZED WATER 7732-18-5 78.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add tetrasodium edta and silicone emulsion during mixing.
Add sodium tripolyphosphate during constant stirring. Finally, add
sodium hydroxide part to part and slowly while mixing. Stop mixing and
wait 1 – 2 hour. Start to stirr again. Then add butyl glycol and mix.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60 to

car washing machine to wash car as touchless and brushless.

** 22 **
 TOUCHLESS AND BRUSHLESS
SOLVENT BASED
CAR WASH SNOW FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 4.5
( SLES )

2 GLUCOPON 215 68515-73-1 2

3 BUTYL GLYCOL 111-76-2 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 3

5 SILICONE EMULSION MIXTURE 0.5

6 TETRASODIUM EDTA 10378-23-1 7

7 COCOAMIDOPROPYL BETAINE 61789-40-0 3

8 DEINOIZED WATER 7732-18-5 78

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add betaine and stirr well. Add tetrasodium edta and silicone
emulsion during mixing. Finally, add sodium hydroxide part to part and
slowly while mixing. Stop mixing and wait 1 – 2 hour. Start to stirr again.
Then add butyl glycol and mix. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 23 **
 TOUCHLESS AND BRUSHLESS
SOLVENT BASED
CAR WASH SNOW FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6.5
( SLES )

2 TETRASODIUM EDTA 10378-23-1 3

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 7

( KTPP )

4 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 2

5 SILICONE EMULSION MIXTURE 0.5

6 BUTYL GLYCOL 111-76-2 2

7 DEINOIZED WATER 7732-18-5 80

TOTAL 100
PROCESS: Charge deinoized water in the process tank. Start to mix.
Add sles. Dissolve sles in the water completely. Add tetrasodium edta
and silicone emulsion while constant mixing. Add potassium
tripolyphosphate during constant stirring. Finally, add potassium
hydroxide part to part and slowly while mixing. Stop mixing and wait 1 –
2 hour. Start to stirr again. Then add butyl glycol and mix. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60 to

car washing machine to wash car as touchless and brushless.

** 24 **
 COLOR FOAM
TOUCHLESS AND BRUSHLESS
CAR WASH SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 EDITRONIC ACID 2809-21-4 8

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 5.5

5 SODIUM CARBONATE 497 – 19-8 1.5

6 COCOAMIDOPROPYL BETAINE 61789-40-0 2

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

8 DEINOIZED WATER 7732 – 18-5 75.850

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add editronic acid and mix well. Add sodium tripolyphosphate and
sodium carbonate during constant stirring. Add food dye and mix well.
Finally, add sodium hydroxide part to part and slowly while mixing.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 25 **
 COLOR FOAM
TOUCHLESS AND BRUSHLESS
CAR WASH SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 3

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 7

( KTPP )

4 TETRASODIUM EDTA 10378-23-1 2

5 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 3

6 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

7 DEINOIZED WATER 7732 – 18-5 79.850

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add potassium tripolyphosphate and mix well. Add tetrasodium edta
during constant stirring. Add food dye and stirr well. Finally, add
potassium hydroxide part to part and slowly while mixing. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 26 **
 COLOR FOAM
TOUCHLESS AND BRUSHLESS
CAR WASH SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6.850
( SLES )

2 EDITRONIC ACID 2809-21-4 10

3 SODIUM HEXAMETAPHOSPHATE 10124-56-8 2

( SHMP )

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 5

5 SODIUM CARBONATE 497 – 19-8 1

6 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

7 DEINOIZED WATER 7732 – 18-5 75

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add sodium hexametaphosphate and sodium carbonate during
constant stirring. Add food dye and mix well. Finally, add sodium
hydroxide part to part and slowly while mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 27 **
 COLOR FOAM
TOUCHLESS AND BRUSHLESS
CAR WASH SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 EDITRONIC ACID 2809-21-4 10

3 SODIUM HYDROXIDE ( % 100 ) 7758-29-4 7

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

5 DEINOIZED WATER 7732-18-5 76.850

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add food dye during constant stirring. Finally, add sodium
hydroxide part to part and slowly while mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 28 **
 COLOR FOAM AND POLISH ADDED
TOUCHLESS AND BRUSHLESS
CAR WASH FOAM SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6.5
( SLES )

2 TETRASODIUM EDTA 10378-23-1 7

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 4

5 SILICONE EMULSION MIXTURE 0.600

6 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

7 DEINOIZED WATER 7732 – 18-5 79.750

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add tetrasodium edta
and silicone emulsion while constant mixing. Add sodium
tripolyphosphate during constant stirring. Add food dye and mix. Finally,
add sodium hydroxide part to part and slowly while mixing. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 29 **
 COLOR FOAM AND POLISH ADDED
TOUCHLESS AND BRUSHLESS
CAR WASH FOAM SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 GLUCOPON 215 68515-73-1 2

3 TETRASODIUM EDTA 10378-23-1 6.5

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 3

5 SILICONE EMULSION MIXTURE 0.5

6 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

7 DEINOIZED WATER 7732-18-5 81.850

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add tetrasodium edta and silicone emulsion during mixing.
Add food dye during constant stirring. Finally, add sodium hydroxide part
to part and slowly while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 30 **
 COLOR FOAM AND POLISH ADDED
TOUCHLESS AND BRUSHLESS
CAR WASH FOAM SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 GLUCOPON 215 68515-73-1 2

3 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 4

5 SILICONE EMULSION MIXTURE 0.5

6 TETRASODIUM EDTA 10378-23-1 8

7 COCOAMIDOPROPYL BETAINE 61789-40-0 2

8 DEINOIZED WATER 7732-18-5 78.350

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add betaine and stirr well. Add tetrasodium edta and silicone
emulsion during mixing. Add food dye during constant stirring. Finally,
add sodium hydroxide part to part and slowly while mixing. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 31 **
 COLOR FOAM AND POLISH ADDED
TOUCHLESS AND BRUSHLESS
CAR WASH FOAM SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 TETRASODIUM EDTA 10378-23-1 3

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 7

( KTPP )

4 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 2

5 SILICONE EMULSION MIXTURE 0.600

6 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

7 DEINOIZED WATER 7732-18-5 82.250

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add tetrasodium edta
and silicone emulsion while constant mixing. Add potassium
tripolyphosphate during constant stirring. Finally, add potassium
hydroxide part to part and slowly while mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60 to

car washing machine to wash car as touchless and brushless.

** 32 **
 COLOR FOAM AND SOLVENT BASED
TOUCHLESS AND BRUSHLESS
CAR WASH FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 TETRASODIUM EDTA 10378-23-1 7

3 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 4

5 SILICONE EMULSION MIXTURE 0.5

6 BUTYL GLYCOL 111 – 76-2 2

7 DEINOIZED WATER 7732-18-5 80.350

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add tetrasodium edta
and silicone emulsion while constant mixing. Add food dye during
constant stirring. Finally, add sodium hydroxide part to part and slowly
while mixing. Stop mixing and wait 1 – 2 hour. Start to stirr again. Then
add butyl glycol and mix. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 33 **
 COLOR FOAM AND SOLVENT BASED
TOUCHLESS AND BRUSHLESS
CAR WASH FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 3

5 SILICONE EMULSION MIXTURE 0.5

6 TETRASODIUM EDTA 10378-23-1 6.5

7 BUTYL GLYCOL 111-76-2 2

8 DEIONOIZED WATER 7732-18-5 79.850

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add tetrasodium edta
and silicone emulsion during mixing. Add sodium tripolyphosphate
during constant stirring. Add food dye and mix well. Finally, add sodium
hydroxide part to part and slowly while mixing. Stop mixing and wait 1 –
2 hour. Start to stirr again. Then add butyl glycol and mix. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60 to

car washing machine to wash car as touchless and brushless.

** 34 **
 COLOR FOAM AND SOLVENT BASED
TOUCHLESS AND BRUSHLESS
CAR WASH FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 GLUCOPON 215 68515-73-1 2

3 BUTYL GLYCOL 111-76-2 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 3

5 SILICONE EMULSION MIXTURE 0.5

6 TETRASODIUM EDTA 10378-23-1 7

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

8 DEINOIZED WATER 7732-18-5 79.350

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add food dye and stirr well. Add tetrasodium edta and
silicone emulsion during mixing. Finally, add sodium hydroxide part to
part and slowly while mixing. Stop mixing and wait 1 – 2 hour. Start to
stirr again. Then add butyl glycol and mix. Continue to stirr until mixture
is homogenous. Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 35 **
 COLOR FOAM AND SOLVENT BASED
TOUCHLESS AND BRUSHLESS
CAR WASH FOAM POLISH SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 TETRASODIUM EDTA 10378-23-1 2

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 8

( KTPP )

4 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 3

5 SILICONE EMULSION MIXTURE 0.5

6 BUTYL GLYCOL 111-76-2 2

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

8 DEINOIZED WATER 7732 – 18-5 78.35

TOTAL 100
PROCESS: Charge deinoized water in the process tank. Start to mix.
Add sles. Dissolve sles in the water completely. Add tetrasodium edta
and silicone emulsion while constant mixing. Add potassium
tripolyphosphate and food dye during constant stirring. Finally, add
potassium hydroxide part to part and slowly while mixing. Stop mixing
and wait 1 – 2 hour. Start to stirr again. Then add butyl glycol and mix.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60 to

car washing machine to wash car as touchless and brushless.

** 36 **
 TOUCHLESS / BRUSHLESS
AND ANTI CORROSION AGENT ADDED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 7
( SLES )

2 EDITRONIC ACID 2809-21-4 10

3 TETRASODIUM EDTA 10378-23-1 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 6

5 SODIUM METASILICATE 6834 – 92-0 1.5

6 DEINOIZED WATER 7732 – 18-5 73.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add tetrasodium edta and sodium metasilicate during constant
stirring. Finally, add sodium hydroxide part to part and slowly while
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 37 **
 TOUCHLESS / BRUSHLESS
AND ANTI CORROSION AGENT ADDED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 2

ACID ( LABSA )

3 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758- 29-4 2

5 TRIETHANOLAMINE ( TEA ) 102 – 71-6 7

6 SODIUM METASILICATE 6834 – 92-0 1

7 DEINOIZED WATER 7732 – 18-5 79

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and labsa. Dissolve sles and labsa in the water completely.
Add sodium tripolyphosphate and sodium hexametaphosphate during
constant stirring. Add sodium metasilicate and mix well. Finally, add
triethanolamine part to part and slowly while mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 38 **
 TOUCHLESS / BRUSHLESS
AND ANTI CORROSION AGENT ADDED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 3

3 EDITRONIC ACID 2809-21-4 7

4 TETRASODIUM EDTA 10378-23-1 3

5 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 5

6 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

7 SODIUM METASILICATE 6834 – 92-0 1

8 DEINOIZED WATER 7732 – 18-5 74

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add editronic acid and mix well. Add tetrasodium edta and sodium
metasilicate during constant stirring. Finally, add sodium hydroxide and
triethanolamine part to part and slowly while mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 39 **
 TOUCHLESS / BRUSHLESS
AND ANTI CORROSION AGENT ADDED
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5.5
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 3

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 5

( KTPP )

4 TETRASODIUM EDTA 10378-23-1 3

5 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 5

6 SODIUM METASILICATE 6834 – 92-0 1.5

7 DEINOIZED WATER 7732 – 18-5 77

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add potassium tripolyphosphate and mix well. Add tetrasodium edta and
sodium metasilicate during constant stirring. Finally, add potassium
hydroxide part to part and slowly while mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 40 **
 SOLVENT AND ANTI CORROSION
AGENT ADDED TOUCHLESS / BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 EDITRONIC ACID 2809-21-4 9

3 TETRASODIUM EDTA 10378-23-1 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 6

5 SODIUM METASILICATE 6834 – 92-0 1.5

6 BUTYL GLYCOL 111 – 76-2 2

7 DEIONOIZED WATER 7732 – 18-5 73.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add tetrasodium edta and sodium metasilicate during constant
stirring. Finally, add sodium hydroxide part to part and slowly while
mixing. Stop mixing and wait 1 – 2 hour. Then, start to stirr again. Then,
add butyl glycol and mix. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 41 **
 SOLVENT AND ANTI CORROSION
AGENT ADDED TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 2

ACID ( LABSA )

3 BUTYL GLYCOL 111 – 76-2 2

4 TETRASODIUM EDTA 10378-23-1 7

5 TRIETHANOLAMINE ( TEA ) 102 – 71-6 5

6 SODIUM METASILICATE 6834 – 92-0 1

7 DEINOIZED WATER 7732 – 18-5 78

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and labsa. Dissolve sles and labsa in the water completely.
Add tetrasodium edta during constant stirring. Add sodium metasilicate
and mix well. Finally, add triethanolamine part to part and slowly while
mixing. Stop to mixing and wait 1 – 2 hour for cooling mixture in the tank.
Then, start to mix again. Add butyl glycol and mix well. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 42 **
 SOLVENT AND ANTI CORROSION
AGENT ADDED TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 2

3 EDITRONIC ACID 2809-21-4 6

4 TETRASODIUM EDTA 10378-23-1 3

5 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 6

6 BUTYL GLYCOL 111 – 76-2 2

7 SODIUM METASILICATE 6834 – 92-0 1

8 DEINOIZED WATER 7732 – 18-5 74

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add editronic acid and mix well. Add tetrasodium edta and sodium
metasilicate during constant stirring. Finally, add sodium hydroxide part
to part and slowly while mixing. Stop mixing and wait for 1 – 2 hour for
cooling mixture in the tank. Then, start to mix again. Add butyl glycol and
mix well. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 43 **
 SOLVENT AND ANTI CORROSION
AGENT ADDED TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 2

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 7

4 TETRASODIUM EDTA 10378-23-1 3

5 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 5

6 SODIUM METASILICATE 6834 – 92-0 1

7 BUTYL GLYCOL 111 – 76 – 2 2

8 DEINOIZED WATER 7732 – 18-5 74

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add potassium tripolyphosphate and mix well. Add tetrasodium edta and
sodium metasilicate during constant stirring. Finally, add potassium
hydroxide part to part and slowly while mixing. Stop mixing anmd wait for
1 – 2 hour to cooling mixture in the tank. Then, start to stirr again. Add
butyl glycol and stirr well. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 44 **
 COLOR FOAM AND ANTI CORROSION
AGENT ADDED TOUCHLESS / BRUSHLESS
CAR WASH FOAM SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 EDITRONIC ACID 2809-21-4 8

3 TETRASODIUM EDTA 10378-23-1 2

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 6

5 SODIUM METASILICATE 6834 – 92-0 1.350

6 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

7 DEINOIZED WATER 7732 – 18-5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add tetrasodium edta and sodium metasilicate during constant
stirring. Add food dye and mix well. Finally, add sodium hydroxide part to
part and slowly while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 45 **
 COLOR FOAM AND ANTI CORROSION
AGENT ADDED TOUCHLESS / BRUSHLESS
CAR WASH FOAM SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 2

ACID ( LABSA )

3 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758- 29-4 2

5 TRIETHANOLAMINE ( TEA ) 102 – 71-6 7

6 SODIUM METASILICATE 6834 – 92-0 1.350

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

8 DEIONOIZED WATER 7732 – 18-5 78.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and labsa. Dissolve sles and labsa in the water completely.
Add sodium tripolyphosphate and sodium hexametaphosphate during
constant stirring. Add sodium metasilicate and mix well. Add food dye
and stirr well. Finally, add triethanolamine part to part and slowly while
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 46 **
 COLOR FOAM AND ANTI CORROSION
AGENT ADDED TOUCHLESS / BRUSHLESS
CAR WASH FOAM SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

3 EDITRONIC ACID 2809-21-4 7

4 TETRASODIUM EDTA 10378-23-1 3

5 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 5

6 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

7 SODIUM METASILICATE 6834 – 92-0 1.350

8 DEINOIZED WATER 7732 – 18-5 74

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add tetrasodium edta and sodium metasilicate during constant
stirring. Add food dye and stirr well. Finally, add sodium hydroxide and
triethanolamine part to part and slowly while mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 47 **
 COLOR FOAM AND ANTI CORROSION
AGENT ADDED TOUCHLESS / BRUSHLESS
CAR WASH FOAM SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 3

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 5

( KTPP )

4 TETRASODIUM EDTA 10378-23-1 3

5 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 5

6 SODIUM METASILICATE 6834 – 92-0 1.350

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.150

8 DEINOIZED WATER 7732 – 18 -5 76.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add potassium tripolyphosphate and mix well. Add tetrasodium edta and
sodium metasilicate during constant stirring. Add food dye and mix well.
Finally, add potassium hydroxide part to part and slowly while mixing.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 48 **
 POLISH AND ANTI CORROSION
AGENT ADDED TOUCHLESS / BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 EDITRONIC ACID 2809-21-4 8

3 TETRASODIUM EDTA 10378-23-1 1

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 7

5 SODIUM METASILICATE 6834 – 92-0 1

6 SILICONE EMULSION MIXTURE 0.500

7 DEINOIZED WATER 7732 – 18-5 76.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add tetrasodium edta and sodium metasilicate during constant
stirring. Add silicone emulsion and mix well. Finally, add sodium
hydroxide part to part and slowly while mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 49 **
 POLISH AND ANTI CORROSION
AGENT ADDED TOUCHLESS / BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 2

ACID ( LABSA )

3 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758- 29-4 2

5 TRIETHANOLAMINE ( TEA ) 102 – 71-6 5

6 SODIUM METASILICATE 6834 – 92-0 1

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.500

8 DEIONOIZED WATER 7732 – 18-5 80.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and labsa. Dissolve sles and labsa in the water completely.
Add sodium tripolyphosphate and sodium hexametaphosphate during
constant stirring. Add sodium metasilicate and mix well. Add silicone
emülsion and stirr well. Finally, add triethanolamine part to part and
slowly while mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 50 **
 POLISH AND ANTI CORROSION
AGENT ADDED TOUCHLESS / BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 SILICONE EMULSION MIXTURE 0.500

3 EDITRONIC ACID 2809-21-4 7

4 TETRASODIUM EDTA 10378-23-1 3

5 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 5

6 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

7 SODIUM METASILICATE 6834 – 92-0 1

8 DEINOIZED WATER 7732 – 18-5 75.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid and
mix well. Add tetrasodium edta and sodium metasilicate during constant
stirring. Add silicone emulsion and stirr well. Finally, add sodium
hydroxide and triethanolamine part to part and slowly while mixing.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 51 **
 POLISH AND ANTI CORROSION
AGENT ADDED TOUCHLESS / BRUSHLESS
CAR WASH SNOW FOAM SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 COCOAMIDOPROPYL BETAINE 61789-40-0 3

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 7

( KTPP )

4 TETRASODIUM EDTA 10378-23-1 3

5 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 4

6 SODIUM METASILICATE 6834 – 92-0 1

7 SILICONE EMULSION MIXTURE 0.500

8 DEINOIZED WATER 7732 – 18 -5 76.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add potassium tripolyphosphate and mix well. Add tetrasodium edta and
sodium metasilicate during constant stirring. Add silicone emulsion and
mix well. Finally, add potassium hydroxide part to part and slowly while
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 52 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

TOUCHLESS
AND
BRUSHLESS

CAR WASH FOAM

DETERGENT

POWDER

PRODUCTION

SOLVERCHEM PUBLICATIONS
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 TOWER DETERGENT POWDER MIXTURE 50
( % 20 ACTIVE )

2 SODIUM CARBONATE 497-19-8 10

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 30

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 2

5 SODIUM SULFATE ANHYDROUS 7757-82 – 6 8

TOTAL 100

PROCESS: All ingredients above are powder. So, add all ingredients
in the order given to process tank and start to mix. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 53 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 TOWER DETERGENT POWDER MIXTURE 50
( % 20 ACTIVE )

2 SODIUM CARBONATE 497-19-8 10

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 15

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 2

5 SODIUM SULFATE ANHYDROUS 7757-82 – 6 8

6 TETRASODIUM EDTA 10378-23-1 15

TOTAL 100

PROCESS: All ingredients above are powder. So, add all ingredients
in the order given to process tank and start to mix. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 54 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 TOWER DETERGENT POWDER MIXTURE 50
( % 20 ACTIVE )

2 SODIUM HEXAMETAPHOSPHATE 10124-56-8 20

( SHMP )

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 20

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 2

5 SODIUM CARBONATE 497-19-8 8

TOTAL 100

PROCESS: All ingredients above are powder. So, add all ingredients
in the order given to process tank and start to mix. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 55 **
 TOUCHLESS AND BRUSHLESS
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 4

NO CAS W/W
INGREDIENTS NUMBER
1 TOWER DETERGENT POWDER MIXTURE 50
( % 20 ACTIVE )

2 SODIUM HEXAMETAPHOSPHATE 10124-56-8 10

( SHMP )

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 10

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 5

5 TETRASODIUM EDTA 10378-23-1 25

TOTAL 100

PROCESS: All ingredients above are powder. So, add all ingredients
in the order given to process tank and start to mix. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 56 **
 TOUCHLESS / BRUSHLESS
AND ANTI CORROSION AGENT ADDED
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 TOWER DETERGENT POWDER MIXTURE 50
( % 20 ACTIVE )

2 SODIUM CARBONATE 497-19-8 10

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 30

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 2

5 SODIUM SULFATE ANHYDROUS 7757-82 – 6 5

6 SODIUM METASILICATE 13517-24-3 3

( Anti corrosion agent )

TOTAL 100

PROCESS: All ingredients above are powder. So, add all ingredients
in the order given to process tank and start to mix. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 57 **
 TOUCHLESS / BRUSHLESS
AND ANTI CORROSION AGENT ADDED
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 TOWER DETERGENT POWDER MIXTURE 50
( % 20 ACTIVE )

2 SODIUM CARBONATE 497-19-8 10

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 13

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 2

5 SODIUM METASILICATE 13517-24-3 5

( Anti corrosion agent )

6 TETRASODIUM EDTA 10378-23-1 20

TOTAL 100

PROCESS: All ingredients above are powder. So, add all ingredients
in the order given to process tank and start to mix. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 58 **
 TOUCHLESS / BRUSHLESS
AND ANTI CORROSION AGENT ADDED
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 TOWER DETERGENT POWDER MIXTURE 50
( % 20 ACTIVE )

2 SODIUM HEXAMETAPHOSPHATE 10124-56-8 25

( SHMP )

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 10

4 SODIUM HYDROXIDE ( % 100 ) 1310 - 73 - 2 2

5 SODIUM CARBONATE 497-19-8 8

6 SODIUM METSILICATE 13517-24-3 5

( Anti corrosion agent )

TOTAL 100

PROCESS: All ingredients above are powder. So, add all ingredients
in the order given to process tank and start to mix. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 59 **
 TOUCHLESS / BRUSHLESS
AND ANTI CORROSION AGENT ADDED
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 4

NO CAS W/W
INGREDIENTS NUMBER
1 TOWER DETERGENT POWDER MIXTURE 50
( % 20 ACTIVE )

2 SODIUM HEXAMETAPHOSPHATE 10124-56-8 15

( SHMP )

3 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 10

4 SODIUM METASILICATE 13517-24-3 5

( Anti corrosion agent )

5 TETRASODIUM EDTA 10378-23-1 20

TOTAL 100

PROCESS: All ingredients above are powder. So, add all ingredients
in the order given to process tank and start to mix. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 60 **
 TOUCHLESS / BRUSHLESS
AND WAX ADDED
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 27.5
( SLES )

2 SODIUM CARBONATE 497-19-8 60

3 SILICONE EMULSION ( Polish Agent ) MIXTURE 2.5

4 TETRASODIUM EDTA 10378-23-1 10

TOTAL 100

PROCESS: Put sles in the process tank and add silicone emulsion.
Start to mix high speed with special drill until mixture is granular in the
process tank. Add tetrasodium edta during high speed mixing with
special drill. Continue to stirr until mixture is homogenous and granular.
Homogenous and granular are enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 61 **
 TOUCHLESS / BRUSHLESS
AND WAX ADDED
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 28
( SLES )

2 SODIUM CARBONATE 497-19-8 60

3 SILICONE EMULSION ( Polish Agent ) MIXTURE 2

4 TETRASODIUM EDTA 10378-23-1 5

5 SODIUM HEXAMETAPHOSPHATE 10124-56-8 5

( SHMP )

TOTAL 100

PROCESS: Put sles in the process tank and add silicone emulsion.
Start to mix high speed with special drill until mixture is granular in the
process tank. Add tetrasodium edta and sodium hexametaphosphate
during high speed mixing with special drill. Continue to stirr until mixture
is homogenous and granular. Homogenous and granular are enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 62 **
 TOUCHLESS / BRUSHLESS
AND WAX ADDED
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 28
( SLES )

2 SODIUM CARBONATE 497-19-8 58

3 SILICONE EMULSION ( Polish Agent ) MIXTURE 2

4 TETRASODIUM EDTA 10378-23-1 5

5 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

6 SODIUM HYDROXIDE (Granular ) 1310 -73 – 2 3

TOTAL 100

PROCESS: Put sles in the process tank and add silicone emulsion.
Start to mix high speed with special drill until mixture is granular in the
process tank. Add the rest of ingredients during high speed mixing with
special drill. Continue to stirr until mixture is homogenous and granular.
Homogenous and granular are enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 63 **
 TOUCHLESS / BRUSHLESS
AND WAX ADDED
CAR WASH SNOW FOAM DETERGENT POWDER
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 27.5
( SLES )

2 SODIUM CARBONATE 497-19-8 60

3 SILICONE EMULSION ( Polish Agent ) MIXTURE 2.5

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 4

5 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

6 SODIUM HYDROXIDE ( Granular ) 1310 -73 – 2 2

TOTAL 100

PROCESS: Put sles in the process tank and add silicone emulsion.
Start to mix high speed with special drill until mixture is granular in the
process tank. Add the rest of ingredients during high speed mixing with
special drill. Continue to stirr until mixture is homogenous and granular.
Homogenous and granular are enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 64 **
 COLOR FOAM
TOUCHLESS / BRUSHLESS
CAR WASH FOAM DETERGENT POWDER
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 30
( SLES )

2 SODIUM CARBONATE 497-19-8 60

3 FOOD DYES ( ANY COLOR ) MIXTURE 0.5

4 TETRASODIUM EDTA 10378-23-1 9.5

TOTAL 100

PROCESS: Put sles in the process tank and add food dye. Start to
mix high speed with special drill until mixture is granular in the process
tank. Add tetrasodium edta during high speed mixing with special drill.
Continue to stirr until mixture is homogenous and granular. Homogenous
and granular are enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 65 **
 COLOR FOAM
TOUCHLESS / BRUSHLESS
CAR WASH FOAM DETERGENT POWDER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 30
( SLES )

2 SODIUM CARBONATE 497-19-8 60

3 FOOD DYES ( ANY COLOR ) MIXTURE 1

4 TETRASODIUM EDTA 10378-23-1 4

5 SODIUM HEXAMETAPHOSPHATE 10124-56-8 5

( SHMP )

TOTAL 100

PROCESS: Put sles in the process tank and add food dye. Start to
mix high speed with special drill until mixture is granular in the process
tank. Add tetrasodium edta and sodium hexametaphosphate during high
speed mixing with special drill. Continue to stirr until mixture is
homogenous and granular. Homogenous and granular are enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 66 **
 COLOR FOAM
TOUCHLESS / BRUSHLESS
CAR WASH FOAM DETERGENT POWDER
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 29.25
( SLES )

2 SODIUM CARBONATE 497-19-8 60

3 FOOD DYES ( ANY COLOR ) MIXTURE 0.75

4 TETRASODIUM EDTA 10378-23-1 5

5 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

6 SODIUM HYDROXIDE (Granular ) 1310 -73 – 2 1

TOTAL 100

PROCESS: Put sles in the process tank and add food dye. Start to
mix high speed with special drill until mixture is granular in the process
tank. Add the rest of ingredients during high speed mixing with special
drill. Continue to stirr until mixture is homogenous and granular.
Homogenous and granular are enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 67 **
 COLOR FOAM
TOUCHLESS / BRUSHLESS
CAR WASH FOAM DETERGENT POWDER
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 29
( SLES )

2 SODIUM CARBONATE 497-19-8 60

3 FOOD DYES ( ANY COLOR ) MIXTURE 1

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 4

5 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

6 SODIUM HYDROXIDE ( Granular ) 1310 -73 – 2 2

TOTAL 100

PROCESS: Put sles in the process tank and add food dye. Start to
mix high speed with special drill until mixture is granular in the process
tank. Add the rest of ingredients during high speed mixing with special
drill. Continue to stirr until mixture is homogenous and granular.
Homogenous and granular are enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 68 **
 COLOR FOAM AND WAX ADDED
TOUCHLESS / BRUSHLESS
CAR WASH FOAM DETERGENT POWDER
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 29
( SLES )

2 SODIUM CARBONATE 497-19-8 59

3 FOOD DYES ( ANY COLOR ) MIXTURE 0.5

4 TETRASODIUM EDTA 10378-23-1 9

5 SILICONE EMULSION ( Polish Agent ) MIXTURE 2.5

TOTAL 100

PROCESS: Put sles in the process tank. Add food dye and silicone
emulsion. Start to mix high speed with special drill until mixture is
granular in the process tank. Add tetrasodium edta during high speed
mixing with special drill. Continue to stirr until mixture is homogenous
and granular. Homogenous and granular are enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 69 **
 COLOR FOAM AND WAX ADDED
TOUCHLESS / BRUSHLESS
CAR WASH FOAM DETERGENT POWDER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 30
( SLES )

2 SODIUM CARBONATE 497-19-8 58

3 FOOD DYES ( ANY COLOR ) MIXTURE 1

4 TETRASODIUM EDTA 10378-23-1 4

5 SODIUM HEXAMETAPHOSPHATE 10124-56-8 5

( SHMP )

6 SILICONE EMULSION ( Polish Agent ) MIXTURE 2

TOTAL 100

PROCESS: Put sles in the process tank. Add food dye and silicone
emulsion. Start to mix high speed with special drill until mixture is
granular in the process tank. Add tetrasodium edta and sodium
hexametaphosphate during high speed mixing with special drill.
Continue to stirr until mixture is homogenous and granular. Homogenous
and granular are enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 70 **
 COLOR FOAM AND WAX ADDED
TOUCHLESS / BRUSHLESS
CAR WASH FOAM DETERGENT POWDER
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 29.25
( SLES )

2 SODIUM CARBONATE 497-19-8 59

3 FOOD DYES ( ANY COLOR ) MIXTURE 0.75

4 TETRASODIUM EDTA 10378-23-1 4

5 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

6 SODIUM HYDROXIDE (Granular ) 1310 -73 – 2 1

7 SILICONE EMULSION ( Polish Agent ) MIXTURE 2

TOTAL 100

PROCESS: Put sles in the process tank. Add food dye and silicone
emulsion. Start to mix high speed with special drill until mixture is
granular in the process tank. Add the rest of ingredients during high
speed mixing with special drill. Continue to stirr until mixture is
homogenous and granular. Homogenous and granular are enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 71 **
 COLOR FOAM AND WAX ADDED
TOUCHLESS / BRUSHLESS
CAR WASH FOAM DETERGENT POWDER
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 28.5
( SLES )

2 SODIUM CARBONATE 497-19-8 58

3 FOOD DYES ( ANY COLOR ) MIXTURE 1

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 4

5 SODIUM HEXAMETAPHOSPHATE 10124-56-8 4

( SHMP )

6 SODIUM HYDROXIDE ( Granular ) 1310 -73 – 2 2

7 SILICONE EMULSION ( Polish Agent ) MIXTURE 2.5

TOTAL 100

PROCESS: Put sles in the process tank. Add food dye and silicone
emulsion. Start to mix high speed with special drill until mixture is
granular in the process tank. Add the rest of ingredients during high
speed mixing with special drill. Continue to stirr until mixture is
homogenous and granular. Homogenous and granular are enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and filled 1 / 60

to car washing machine to wash car as touchless and brushless.

** 72 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

FOAMING

CAR WASH

SHAMPOO

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
CAR WASH SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 10
( SLES )

2 COCAMIDE DEA 68603-42-9 2

3 SODIUM CHLORIDE 7647-14-5 2

4 DYE ( ANY COLOR ) MIXTURE 0.050

5 FRANGRANCE MIXTURE 0.100

6 DEINOIZED WATER 7732 – 18-5 85.850

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add cocamide dea and
mix well. Add dye and frangrance during constant stirring. Finally, add
sodium chloride part to part and slowly while mixing. Sodium chloride is
used to viscosity. More can be added, if high viscosity is desired.
Continue to stirr until mixture is homogenous and desired viscosity.
Homogenous and viscosity is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted 1 / 40

and used to hand and brush washing car.

** 73 **
 CONCENTRATED
CAR WASH SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 8.5
( SLES )

2 COCAMIDE DEA 68603-42-9 2

3 COCAMIDOPROPYL BETAINE 61789-40-0 1.5

4 DYE ( ANY COLOR ) MIXTURE 0.050

5 FRANGRANCE MIXTURE 0.100

6 SODIUM CHLORIDE 7647 – 14-5 2.5

7 DEINOIZED WATER 7732 – 18-5 85.35

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add cocamide dea and mix well. Add dye and frangrance during
constant stirring. Finally, add sodium chloride part to part and slowly
while mixing. Sodium chloride is used to viscosity. More can be added, if
high viscosity is desired. Continue to stirr until mixture is homogenous
and desired viscosity. Homogenous and viscosity is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted 1 / 35

and used to hand and brush washing car.

** 74 **
 CONCENTRATED
CAR WASH SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 COCAMIDE DEA 68603-42-9 2

3 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 4

ACID ( LABSA )

4 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 0.5

5 DYE ( ANY COLOR ) MIXTURE 0.050

6 FRANGRANCE MIXTURE 0.100

7 SODIUM CHLORIDE 7647 – 14-5 2

8 DEINOIZED WATER 7732 – 18-5 85.35

TOTAL 100
PROCESS: Charge deinoized water in the process tank. Start to mix.
Add sles and labsa. Dissolve sles and labsa in the water completely.
Add cocamide dea and sodium hydroxide while mixing. Add dye and
frangrance during constant stirring. Finally, add sodium chloride part to
part and slowly while mixing. Sodium chloride is used to viscosity. More
can be added, if high viscosity is desired. Continue to stirr until mixture is
homogenous and desired viscosity. Homogenous and viscosity is
enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted 1 / 45

and used to hand and brush washing car.

** 75 **
 CONCENTRATED
CAR WASH SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 COCAMIDE DEA 68603-42-9 2

3 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 4

ACID ( LABSA )

4 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 0.5

5 COCAMIDOPROPYL BETAINE 61789-40-0 5

6 FRANGRANCE MIXTURE 0.100

7 DYE ( ANY COLOR ) MIXTURE 0.050

8 SODIUM CHLORIDE 7647 – 14-5 2

9 DEINOIZED WATER 7732 –18 - 5 81.350

TOTAL 100
PROCESS: Charge deinoized water in the process tank. Start to mix.
Add sles and labsa. Dissolve sles and labsa in the water completely. Add
cocamide dea, betaine and sodium hydroxide while mixing. Add dye and
frangrance during constant stirring. Finally, add sodium chloride part to
part and slowly while mixing. Sodium chloride is used to viscosity. More
can be added, if high viscosity is desired. Continue to stirr until mixture is
homogenous and desired viscosity. Homogenous and viscosity is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted 1 / 50

and used to hand and brush washing car.

** 76 **
 CONCENTRATED AND WAX ADDED
CAR WASH SHAMPOO
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 10
( SLES )

2 COCAMIDE DEA 68603-42-9 2

3 SODIUM CHLORIDE 7647-14-5 2

4 DYE ( ANY COLOR ) MIXTURE 0.050

5 FRANGRANCE MIXTURE 0.100

6 SILICONE EMULSIONE ( Polish Agent ) MIXTURE 0.5

7 DEINOIZED WATER 7732 – 18-5 85.35

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add cocamide dea and
silicone emulsion while constant mixing. Add dye and frangrance during
constant stirring. Finally, add sodium chloride part to part and slowly
while mixing. Sodium chloride is used to viscosity. More can be added, if
high viscosity is desired. Continue to stirr until mixture is homogenous
and desired viscosity. Homogenous and viscosity is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted 1 / 40

and used to hand and brush washing car.

** 77 **
 CONCENTRATED
CAR WASH SHAMPOO
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 8.5
( SLES )

2 COCAMIDE DEA 68603-42-9 2

3 COCAMIDOPROPYL BETAINE 61789-40-0 1.5

4 DYE ( ANY COLOR ) MIXTURE 0.050

5 FRANGRANCE MIXTURE 0.100

6 SILICONE EMULSION ( Polish Agent ) MIXTURE 0.35
7 SODIUM CHLORIDE 7647 – 14-5 2.5

8 DEINOIZED WATER 7732 – 18-5 85

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and betaine. Dissolve sles and betaine in the water completely.
Add cocamide dea and silicone emulsion. Add dye and frangrance
during constant stirring. Finally, add sodium chloride part to part and
slowly while mixing. Sodium chloride is used to viscosity. More can be
added, if high viscosity is desired. Continue to stirr until mixture is
homogenous and desired viscosity. Homogenous and viscosity is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted 1 / 35

and used to hand and brush washing car.

** 78 **
 CONCENTRATED AND WAX ADDED
CAR WASH SHAMPOO
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 7
( SLES )

2 COCAMIDE DEA 68603-42-9 1

3 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 4

ACID ( LABSA )

4 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 0.5

5 SILICONE EMULSION ( Polish Agent ) MIXTURE 0.5
6 DYE ( ANY COLOR ) MIXTURE 0.050

7 FRANGRANCE MIXTURE 0.100

8 SODIUM CHLORIDE 7647 – 14-5 2

9 DEINOIZED WATER 7732 – 18-5 84.85

TOTAL 100
PROCESS: Charge deinoized water in the process tank. Start to mix.
Add sles and labsa. Dissolve sles and labsa in the water completely.
Add cocamide dea and sodium hydroxide while mixing. Add dye and
frangrance during constant stirring. Add silicone emulsion and mix well.
Finally, add sodium chloride part to part and slowly while mixing. Sodium
chloride is used to viscosity. More can be added, if high viscosity is
desired. Continue to stirr until mixture is homogenous and desired
viscosity. Homogenous and viscosity is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted 1 / 45

and used to hand and brush washing car.

** 79 **
 CONCENTRATED AND WAX ADDED
CAR WASH SHAMPOO
PRODUCTION PROCESS – 4
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 6
( SLES )

2 COCAMIDE DEA 68603-42-9 2

3 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 6

ACID ( LABSA )

4 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 0.75

5 COCAMIDOPROPYL BETAINE 61789-40-0 5

6 SILICONE EMULSION ( Polish Agent ) MIXTURE 0.600
7 FRANGRANCE MIXTURE 0.100

8 DYE ( ANY COLOR ) MIXTURE 0.050

9 SODIUM CHLORIDE 7647 – 14-5 2

10 DEINOIZED WATER 7732 –18 - 5 77.5

TOTAL 100
PROCESS: Charge deinoized water in the process tank. Start to mix.
Add sles and labsa. Dissolve sles and labsa in the water completely. Add
cocamide dea, betaine and sodium hydroxide while mixing. Add dye and
frangrance during constant stirring. Add silicone emulsion and mix well.
Finally, add sodium chloride part to part and slowly while mixing. Sodium
chloride is used to viscosity. More can be added, if high viscosity is
desired. Continue to stirr until mixture is homogenous and desired
viscosity. Homogenous and viscosity is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted 1 / 50

and used to hand and brush washing car.

** 80 **
 CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR

ENGINE CLEANER

PRODUCTS

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CAR
ENGINE CLEANER AND DEGREASER
FOAM
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 SODIUM CARBONATE 497-19-8 5

3 SODIUM HYDROXIDE 1310-73-2 2

4 SODIUM METASILICATE 13517-24-3 1

5 SODIUM HEXAMETAPHOSPHATE 10124–56 -8 2

6 DEIONIZED WATER 7732 –18 - 5 85

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add remainder of
ingredients in the order given with agitation. Continue to stirr until
mixture is homogenous and clear. Homogenous and clear is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 40 - 50 and using with washing foam machine.

** 81 **
 CAR
ENGINE CLEANER AND DEGREASER
FOAM
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 6
ACID ( LABSA )

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 3

3 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 2.5

4 EDITRONIC ACID ( % 60 ) 2809-21-4 5

5 DEINOIZED WATER 7732 – 18-5 83.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add labsa. Dissolve labsa in the water completely. Add editronic acid
while mixing. Add sodium hydroxide part to part and slowly. Add
triethanolamine and mix well. Continue to stirr until mixture is
homogenous and desired clear. Homogenous and clear is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 45 - 60 and using with washing foam machine.

** 82 **
 CAR
ENGINE CLEANER AND DEGREASER
FOAM
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 SODIUM METASILICATE 13517-24-3 1

3 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 5

4 EDITRONIC ACID ( % 60 ) 13517-24-3 3

5 DEIONIZED WATER 7732 – 18-5 86

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add editronic acid
during stirring. Add sodium metasilicate and mix well. Finally, add
sodium hydroxide while mixing. Continue to stirr until mixture is
homogenous and desired clear. Homogenous and clear is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 40 - 50 and using with washing foam machine.

** 83 **
 FOAMING AND SOLVENT
BASED
ENGINE CLEANER AND DEGREASER
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111-76-2 6

2 SODIUM LAURYL ETHER SULFATE 68585-34-2 4

3 NONYLPHENOL ETHOXYLATE 10 9016-45-9 2

4 DEINOIZED WATER 7732-18-5 88

TOTAL 100

PROCESS: Charge deinoized water in the process tank and add

sodium lauryl ether sulfate ( Sles ). Start to mix. Dissolve sles in the
water completely. Add nonylphenol ethoxylate and mix well. Add butyl
glycol during constant stirring. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product, amounts of ingredients can be

changed depending on used conditions and markets. This product is
concentrated. It is diluted 1 / 60 water and using with special cleaning
pomp to clean car engines.

** 84 **
 FOAMING AND SOLVENT
BASED
ENGINE CLEANER AND DEGREASER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111-76-2 6

2 SODIUM LAURYL ETHER SULFATE 68585-34-2 4

3 GLUCOPON 215 ( BASF ) Trade name 5

4 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 2

5 POTASSIUM HYDROXIDE ( % 100 ) 1310 – 58-3 3

6 DEINOIZED WATER 7732 – 18-5 80

TOTAL 100

PROCESS: Charge deinoized water in the process tank and add

sodium lauryl ether sulfate ( Sles ). Start to mix. Dissolve sles in the
water completely. Add glucopon 215 and mix well. Add potassium
tripolyphosphate and potassium hydroxide while mixing. Add butyl glycol
during constant stirring. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: The above formulated product, amounts of ingredients can be
changed depending on used conditions and markets. This product is
concentrated. It is diluted 1 / 60 water and using with special cleaning
pump to clean car engines.

** 85 **
 FOAMING AND SOLVENT
BASED
ENGINE CLEANER AND DEGREASER
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111-76-2 5

2 POTASSIUM HYDROXIDE ( % 100 ) 68585-34-2 5

3 C10 – 16 ALKYL GLYCOSIDE 110615-47-9 10

4 DEINIZOED WATER 7732 – 18- 5 80

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add alkyl glucoside and mix well. Add potassium hydroxide during
mixing. Add butyl glycol during mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product, amounts of ingredients can be

changed depending on used conditions and markets. This product is
concentrated. It is diluted 1 / 60 water and using with special cleaning
pump to clean car engines.

** 86 **
 CAR
ENGINE CLEANER AND DEGREASER
GASEOUS OR NON – GASEOUS SPRAY
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111-76-2 30

2 DEINOIZED WATER 7732 -18-5 70

TOTAL 100

PROCESS: Charge deinoized water and butyl glycol in the process

tank. Start to mix. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product, amounts of ingredients can be

changed depending on used conditions and markets. This product is
concentrated. It is diluted 1 / 5 - 1 / 8.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 87 **
 CAR
ENGINE CLEANER AND DEGREASER
GASEOUS OR NON – GASEOUS SPRAY
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111-76-2 20

2 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 10

3 DEINOIZED WATER 7732-18-5 70

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add isopropyl alcohol and butyl glycol during constant mixing. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: The above formulated product, amounts of ingredients can be
changed depending on used conditions and markets. This product is
concentrated. It is diluted 1 / 7 - 1 / 10.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 88 **
 CAR
ENGINE CLEANER AND DEGREASER
GASEOUS OR NON – GASEOUS SPRAY
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 WHITE SPIRIT MIXTURE 90

2 FUEL OIL MIXTURE 10

TOTAL 100

PROCESS: Charge White spirit and fuel oil in the process tank. Start
to mix. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: The above formulated product, amounts of ingredients can be

changed depending on used conditions and markets. This product is
concentrated. It is mixed 1 / 40 - 1 / 50 with fuel oil directly

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 89 **
 CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR WHEELS

CLEANER & POLISHER

PRODUCTS

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
ACIDIC AND FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 EDITRONIC ACID 13517-24-3 1

3 PHOSPHORIC ACID 7664 – 38-2 5

4 BUTYL GLYCOL 111 – 76 - 2 10

5 DEIONIZED WATER 7732 – 18-5 79

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add remainder of
ingredients in the order given with agitation. Continue to stirr until
mixture is homogenous and desired clear. Homogenous and clear is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 10 - 20 and used to clean car wheels.

** 90 **
 CONCENTRATED
ACIDIC AND FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 EDITRONIC ACID 13517-24-3 2

3 PHOSPHORIC ACID 7664 – 38-2 3

4 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 12

5 NONYLPHENOL ETHOXYLATE 10 9016-45-9 3

6 DEINOIZED WATER 7732 – 18-5 75

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and nonylphenol ethoxylate. Dissolve sles and nonylphenol
ethoxylate in the water completely. Add remainder of ingredients in the
order given with agitation. Continue to stirr until mixture is homogenous
and clear. Homogenous and clear is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 10 - 20 and used to clean car wheels.

** 91 **
 CONCENTRATED
ACIDIC AND FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 4
( SLES )

2 C10 – 16 ALKYL GLUCOSIDE 110615-47-9 4

3 PHOSPHORIC ACID 7664 – 38-2 4

4 BUTYL GLYCOL 111 – 76 - 2 5

5 METHYL ALCOHOL 67 – 56 – 1 8

6 DEINOIZED WATER 7732 – 18-5 75

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and alkyl glucoside. Dissolve sles and alkyl glucoside in the
water completely. Add remainder of ingredients in the order given with
agitation. Continue to stirr until mixture is homogenous and clear.
Homogenous and clear is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 10 - 20 and used to clean car wheels.

** 92 **
 ACIDIC AND FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON – GASEOUS SPRAY
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 1.5
( SLES )

2 EDITRONIC ACID 13517-24-3 0.5

3 PHOSPHORIC ACID 7664 – 38-2 1

4 BUTYL GLYCOL 111 – 76 - 2 2

5 DEIONIZED WATER 7732 – 18-5 95

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles. Dissolve sles in the water completely. Add remainder of
ingredients in the order given with agitation. Continue to stirr until
mixture is homogenous and desired clear. Homogenous and clear is
enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 93 **
 ACIDIC AND FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 1
( SLES )

2 EDITRONIC ACID 13517-24-3 0.5

3 PHOSPHORIC ACID 7664 – 38-2 1

4 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 3

5 NONYLPHENOL ETHOXYLATE 10 9016-45-9 1

6 DEINOIZED WATER 7732 – 18-5 93.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and nonylphenol ethoxylate. Dissolve sles and nonylphenol
ethoxylate in the water completely. Add remainder of ingredients in the
order given with agitation. Continue to stirr until mixture is homogenous
and clear. Homogenous and clear is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 94 **
 ACIDIC AND FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 1
( SLES )

2 C10 – 16 ALKYL GLUCOSIDE 110615-47-9 0.5

3 PHOSPHORIC ACID 7664 – 38-2 1

4 BUTYL GLYCOL 111 – 76 - 2 2

5 METHYL ALCOHOL 67 – 56 – 1 2

6 DEINOIZED WATER 7732 – 18-5 93.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and alkyl glucoside. Dissolve sles and alkyl glucoside in the
water completely. Add remainder of ingredients in the order given with
agitation. Continue to stirr until mixture is homogenous and clear.
Homogenous and clear is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 95 **
 CONCENTRATED
ALKALINE AND FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 4
( SLES )

2 GLUCOPON 215 68515 -73-1 3

3 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 3

4 BUTYL GLYCOL 111 – 76 - 2 7

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 5

6 DEINOIZED WATER 7732 -18-5 78

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add remainder of ingredients in the order given with
agitation. Continue to stirr until mixture is homogenous and clear.
Homogenous and clear is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 8 - 12 and used to clean car wheels.

** 96 **
 CONCENTRATED
ALKALINE AND FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 GLUCOPON 215 68515-73-1 3

3 SODIUM METASILICATE 6834 – 92-0 1

4 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 10

5 TRIETHANOLAMINE 102 – 71-6 3

6 DEINOIZED WATER 7732 – 18-5 78

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add remainder of ingredients in the order given with
agitation. Continue to stirr until mixture is homogenous and clear.
Homogenous and clear is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 9 - 12 and used to clean car wheels.

** 97 **
 CONCENTRATED
ALKALINE AND FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 5
( SLES )

2 C10 – 16 ALKYL GLUCOSIDE 110615-47-9 1

3 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 3

4 ISOPROPYL ALCOHOL ( IPA ) 63 – 67 – 0 5

5 METHYL ALCOHOL 67 – 56 – 1 6

6 DEINOIZED WATER 7732 – 18-5 80

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and alkyl glucoside. Dissolve sles and alkyl glucoside in the
water completely. Add remainder of ingredients in the order given with
agitation. Continue to stirr until mixture is homogenous and desired
clear. Homogenous and clear is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 10 - 12 and used to clean car wheels.

** 98 **
 ALKALINE AND FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON – GASEOUS SPRAY
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 1
( SLES )

2 GLUCOPON 215 68515 -73-1 0.5

3 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 1

4 BUTYL GLYCOL 111 – 76 - 2 2

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 1

6 DEINOIZED WATER 7732 -18-5 94.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add remainder of ingredients in the order given with
agitation. Continue to stirr until mixture is homogenous and clear.
Homogenous and clear is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 99 **
 ALKALINE AND FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON – GASEOUS SPRAY
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 1
( SLES )

2 GLUCOPON 215 68515-73-1 1

3 BUTYL GLYCOL 111 – 76 - 2 1

4 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 2

5 TRIETHANOLAMINE 102 – 71-6 2

6 DEINOIZED WATER 7732 – 18-5 93

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and glucopon. Dissolve sles and glucopon in the water
completely. Add remainder of ingredients in the order given with
agitation. Continue to stirr until mixture is homogenous and clear.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 100 **
 ALKALINE AND FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON – GASEOUS SPRAY
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 1
( SLES )

2 GLUCOPON 215 68515-73-1 1

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

4 ISOPROPYL ALCOHOL ( IPA ) 63 – 67 – 0 2

5 METHYL ALCOHOL 67 – 56 – 1 1

6 DEINOIZED WATER 7732 – 18-5 93

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add sles and alkyl glucoside. Dissolve sles and alkyl glucoside in the
water completely. Add remainder of ingredients in the order given with
agitation. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 101 **
 CONCENTRATED
ACIDIC AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 5

2 METHYL ALCOHOL 67 – 56 – 1 7

3 PHOSPHORIC ACID 7664 – 38-2 3

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 2

5 DEINOIZED WATER 7732 – 18-5 83

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 10 - 15 and used to clean car wheels.

** 102 **
 CONCENTRATED
ACIDIC AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 7

2 CITRIC ACID 5949 – 29-1 3

3 PHOSPHORIC ACID 7664 – 38-2 3

4 DEINOIZED WATER 7732 – 18-5 87

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 12 - 15 and used to clean car wheels.

** 103 **
 CONCENTRATED
ACIDIC AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 7

2 ISOPROPYL ALCOHOL 63 – 67 – 0 7

3 PHOSPHORIC ACID 7664 – 38-2 3

4 CITRIC ACID 5949 – 29-1 3

5 DEINOIZED WATER 7732 – 18-5 80

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 15 - 20 and used to clean car wheels.

** 104 **
 ACIDIC AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON – GASEOUS SPRAY
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 2

2 METHYL ALCOHOL 67 – 56 – 1 1

3 PHOSPHORIC ACID 7664 – 38-2 1

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 0.5

5 DEINOIZED WATER 7732 – 18-5 95.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 105 **
 ACIDIC AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON – GASEOUS SPRAY
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 2.5

2 CITRIC ACID 5949 – 29-1 0.5

3 PHOSPHORIC ACID 7664 – 38-2 0.5

4 DEINOIZED WATER 7732 – 18-5 96.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 106 **
 ACIDIC AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON GASEOUS SPRAY
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 1

2 ISOPROPYL ALCOHOL 63 – 67 – 0 1

3 PHOSPHORIC ACID 7664 – 38-2 1

4 CITRIC ACID 5949 – 29-1 0.5

5 DEINOIZED WATER 7732 – 18-5 96.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 107 **
 CONCENTRATED
NEUTRAL AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 5

2 METHYL ALCOHOL 67 – 56 – 1 5

3 ISOPROPYL ALCOHOL 63 – 67 – 0 5

4 SODIUM TRIPOLYPHOSPHATE ( STPP ) 7758-29-4 0.5

5 DEINOIZED WATER 7732 – 18-5 84.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 10 - 15 and used to clean car wheels.

** 108 **
 CONCENTRATED
NEUTRAL AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 7

2 ISOPROPYL ALCOHOL ( IPA ) 63 – 67 – 0 5

3 TETRASODIUM EDTA 10378-23 -1 0.25

4 DEINOIZED WATER 7732 – 18-5 87.75

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 12 - 15 and used to clean car wheels.

** 109 **
 CONCENTRATED
NEUTRAL AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 7

2 ISOPROPYL ALCOHOL 63 – 67 – 0 7

3 DEINOIZED WATER 7732 – 18-5 84

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 / 15 - 20 and used to clean car wheels.

** 110 **
 NEUTRAL AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON – GASEOUS SPRAY
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 2

2 METHYL ALCOHOL 67 – 56 – 1 1

3 TETRASODIUM EDTA 10378-23-1 0.5

4 DEIONIZED WATER 7732 – 18-5 96.5

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 111 **
 NEUTRAL AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON – GASEOUS SPRAY
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 3

2 DEINOIZED WATER 7732 – 18-5 97

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add butyl glycol with agitation. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 112 **
 ACIDIC AND NON - FOAMING
CAR WHEEL CLEANER AND POLISHER
GASEOUS AND NON GASEOUS SPRAY
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 BUTYL GLYCOL 111 – 76 – 2 1.5

2 ISOPROPYL ALCOHOL 63 – 67 – 0 1

3 SODIUM HEXAMETAPHOSPHATE 10124-56-2 0.5

4 DEINOIZED WATER 7732 – 18-5 97

TOTAL 100

PROCESS: Charge deinoized water in the process tank. Start to mix.

Add remainder of ingredients in the order given with agitation. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 113 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR TYRE

SHINE

PRODUCTS

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 SILICONE BASED AND CONCENTRATED
CAR TYRE SHINE CREAM
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 25

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 3

3 ANTIFOAM AGENT MIXTURE 0.100

4 PRESERVATIVE AGENT MIXTURE 0.100

5 DEINOIZED WATER 7732 – 18-5 71.800

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and stirr well. Dissolve nonylphenol ethoxylate
in the silicone oil. Add deinoized water part to part while mixing. Add
preservative agent and antifoam agent during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: It is usable any light silicone oil and amount of ingredients used
above formulation can be changed depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1: 1 and 1: 2 ratio with deionized water to use car tyre shine.

** 114 **
 SILICONE BASED AND CONCENTRATED
CAR TYRE SHINE CREAM
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 30

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 2.5

3 COCAMIDE DEA 68603-42-9 1

4 PRESERVATIVE AGENT MIXTURE 0.100

5 ANTIFOAM AGENT MIXTURE 0.100

6 DEIONIZED WATER 7732 – 18-5 66.300

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil. Add deinoized water
part to part while mixing. Add preservative agent and antifoam agent
during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: It is usable any light silicone oil and amount of ingredients used
above formulation can be changed depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1: 2 and 1: 3 ratio with deionized water to use car tyre shine.

** 115 **
 SILICONE BASED AND CONCENTRATED
CAR TYRE SHINE CREAM
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 35

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 2.5

3 COCAMIDE DEA 68603-42-9 1.5

4 PRESERVATIVE AGENT MIXTURE 0.100

5 ANTIFOAM AGENT MIXTURE 0.150

6 DEIONIZED WATER 7732 – 18-5 60.75

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil. Add deinoized water
part to part while mixing. Add preservative agent and antifoam agent
during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: It is usable any light silicone oil and amount of ingredients used
above formulation can be changed depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1: 3 and 1: 5 ratio with deionized water to use car tyre shine.

** 116 **
 SILICONE
CAR TYRE SHINE SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 8

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 1

3 ANTIFOAM AGENT MIXTURE 0.100

4 PRESERVATIVE AGENT MIXTURE 0.100

5 DEINOIZED WATER 7732 – 18-5 90.200

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and stirr well. Dissolve nonylphenol ethoxylate
in the silicone oil. Add deinoized water part to part while mixing. Add
preservative agent and antifoam agent during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 117 **
 SILICONE
CAR TYRE SHINE SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 7

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.5

3 COCAMIDE DEA 68603-42-9 0.3

4 PRESERVATIVE AGENT MIXTURE 0.100

5 ANTIFOAM AGENT MIXTURE 0.100

6 DEIONIZED WATER 7732 – 18-5 92

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil. Add deinoized water
part to part while mixing. Add preservative agent and antifoam agent
during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 118 **
 SILICONE
CAR TYRE SHINE SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 6

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.4

3 COCAMIDE DEA 68603-42-9 0.2

4 PRESERVATIVE AGENT MIXTURE 0.100

5 ANTIFOAM AGENT MIXTURE 0.150

6 DEIONIZED WATER 7732 – 18-5 93.200

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil. Add deinoized water
part to part while mixing. Add preservative agent and antifoam agent
during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 119 **
 SILICONE AND GLYCERINE BASED
CAR TYRE SHINE CREAM
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 18

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 1.8

3 ANTIFOAM AGENT MIXTURE 0.100

4 PRESERVATIVE AGENT MIXTURE 0.100

5 GLYCERINE 56-81-5 7

6 DEINOIZED WATER 7732 – 18-5 73

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and stirr well. Dissolve nonylphenol ethoxylate
in the silicone oil. Add deinoized water part to part while mixing. Add
preservative agent and antifoam agent during mixing. Finally, add
glycerine and mix well. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: It is usable any light silicone oil and amount of ingredients used
above formulation can be changed depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1: 2 and 1: 4 ratio with deionized water to use car tyre shine.

** 120 **
 SILICONE AND GLYCERINE BASED
CAR TYRE SHINE CREAM
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 20

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 1.5

3 COCAMIDE DEA 68603-42-9 0.5

4 PRESERVATIVE AGENT MIXTURE 0.100

5 ANTIFOAM AGENT MIXTURE 0.100

6 GLYCERINE 56-81-5 6

7 DEINOIZED WATER 7732 – 18-5 71.8

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil. Add deinoized water
part to part while mixing. Add preservative agent and antifoam agent
during mixing. Add glycerine and stirr well. Continue to stirr until mixture
is homogenous. Homogenous is enough. Process is completed.
NOTE: It is usable any light silicone oil and amount of ingredients used
above formulation can be changed depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1: 2 and 1: 5 ratio with deionized water to use car tyre shine.

** 121 **
 SILICONE AND GLYCERINE BASED
CAR TYRE SHINE CREAM
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 25

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 2

3 COCAMIDE DEA 68603-42-9 0.5

4 PRESERVATIVE AGENT MIXTURE 0.100

5 ANTIFOAM AGENT MIXTURE 0.150

6 GLYCERINE 56 – 81 – 5 5

7 DEINOIZED WATER 7732 –18 - 5 67.250

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil. Add deinoized water
part to part while mixing. Add preservative agent and antifoam agent
during mixing. Finally, add glycerine during mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.
NOTE: It is usable any light silicone oil and amount of ingredients used
above formulation can be changed depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1: 3 and 1: 5 ratio with deionized water to use car tyre shine.

** 122 **
 SILICONE AND GLYCERINE BASED
CAR TYRE SHINE SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 8

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.8

3 ANTIFOAM AGENT MIXTURE 0.100

4 PRESERVATIVE AGENT MIXTURE 0.100

5 GLYCERINE 56 – 81 – 5 1

6 DEINOIZED WATER 7732 -18-5 90

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and stirr well. Dissolve nonylphenol ethoxylate
in the silicone oil. Add deinoized water part to part while mixing. Add
preservative agent and antifoam agent during mixing. Add glycerine
while mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 123 **
 SILICONE AND GLYCERINE BASED
CAR TYRE SHINE SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 5

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.3

3 COCAMIDE DEA 68603-42-9 0.2

4 PRESERVATIVE AGENT MIXTURE 0.100

5 ANTIFOAM AGENT MIXTURE 0.100

6 GLYCERINE 56 – 81 – 5 2

7 DEINOIZED WATER 7732 -18-5 92.300

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil. Add deinoized water
part to part while mixing. Add preservative agent and antifoam agent
during mixing. Add glycerine and mix well. Continue to stirr until mixture
is homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 124 **
 SILICONE AND GLYCERINE BASED
CAR TYRE SHINE SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL ( LIGHT ) MIXTURE 4

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.2

3 COCAMIDE DEA 68603-42-9 0.2

4 PRESERVATIVE AGENT MIXTURE 0.100

5 ANTIFOAM AGENT MIXTURE 0.150

6 GLYCERINE 56 – 81 – 5 3

7 DEINOIZED WATER 7732 – 18-5 92.350

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil. Add deinoized water
part to part while mixing. Add preservative agent and antifoam agent
during mixing. Finally, add glycerine during stirring. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 125 **
 CONCENTRATED
CAR TYRE POLISHER GEL
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 GLYCERINE 56 – 81 – 5 90

2 DEIONIZED WATER 7732 – 18-5 10

TOTAL 100

PROCESS: Charge glycerine in the process tank. Start to mix. Add

deionized water and mix well. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1: 1 and 1: 2 ratio with deionized water to use car tyre shine.

** 126 **
 CONCENTRATED
CAR TYRE POLISHER GEL
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 GLYCERINE 56 – 81 – 5 80

2 GLUCOSE SYRUP MIXTURE 20

TOTAL 100

PROCESS: Charge glycerine in the process tank. Start to mix. Add

glucose syrup and mix well. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1: 2 and 1: 3 ratio with deionized water to use car tyre shine.

** 127 **
 CONCENTRATED
CAR TYRE POLISHER GEL
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 GLYCERINE 56 – 81 – 5 60

2 GLUCOSE SYRUP MIXTURE 30

3 DEINOIZED WATER ( HOT WATER ) 7732 – 18-5 10

TOTAL 100

PROCESS: Charge glucose syrup in the process tank. Start to mix.

Add hot deionized water and mix well. Add glycerine during mixing.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1: 2 and 1: 4 ratio with deionized water to use car tyre shine.

** 128 **
 CAR
TYRE POLISHER SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 GLYCERINE 56 – 81 – 5 15

2 DEIONIZED WATER 7732 – 18-5 85

TOTAL 100

PROCESS: Charge glycerine in the process tank. Start to mix. Add

deionized water and mix well. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 129 **
 CAR
TYRE POLISHER SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 GLYCERINE 56 – 81 – 5 15

2 GLUCOSE SYRUP MIXTURE 5

3 DEIONIZED WATER 7732 – 18-5 80

TOTAL 100

PROCESS: Charge glycerine in the process tank. Start to mix. Add

glucose syrup and mix well. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 130 **
 CAR
TYRE POLISHER SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 GLYCERINE 56 – 81 – 5 18

2 GLUCOSE SYRUP MIXTURE 7

3 DEINOIZED WATER 7732 – 18-5 75

TOTAL 100

PROCESS: Charge glucose syrup in the process tank. Start to mix.

Add deionized water and mix well. Add glycerine during mixing.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 131 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR

INTERIOR CLEANING

PRODUCTS

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
CAR INTERIOR CLEANER
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016-45-9 10

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 1

3 TETRASODIUM EDTA 10378-23-1 3

4 PRESERVATIVE AGENT MIXTURE 0.100

5 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

6 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

7 DEINOIZED WATER 7732 – 18-5 85.75

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add nonylphenol ethoxylate and stirr well. Dissolve nonylphenol
ethoxylate in the water completely. Add remainder of ingredients during
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 5 and 1 : 10 ratio with deionized water to use car interior cleaning.

** 132 **
 CONCENTRATED
CAR INTERIOR CLEANER
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 GLUCOPON 215 68515-73-1 8

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 5

4 PRESERVATIVE AGENT MIXTURE 0.100

5 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

6 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

7 DEINOIZED WATER 7732 – 18-5 84.75

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add glucopon 215 and stirr well. Dissolve glucopon 215 in the water
completely. Add remainder of ingredients during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 5 and 1 : 10 ratio with deionized water to use car interior cleaning.

** 133 **
 CONCENTRATED
CAR INTERIOR CLEANER
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 C13 – C15 OXO ALCOHOL 3EO NONIONIC 5

2 C13 – C15 OXO ALCOHOL 5EO NONIONIC 5

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

4 SODIUM HEXAMETAPHOSPHATE 10124- 56-8 2

5 PRESERVATIVE AGENT MIXTURE 0.100

6 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

8 DEINOIZED WATER 7732 – 18-5 86.75

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add oxo alcohols and stirr well. Dissolve oxo alcohols in the water
completely. Add remainder of ingredients during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 5 and 1 : 10 ratio with deionized water to use car interior cleaning.

** 134 **
 CONCENTRATED AND SOLVENT ADDED
CAR INTERIOR CLEANER
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016-45-9 8

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.75

3 TETRASODIUM EDTA 10378-23-1 3

4 BUTYL GLYCOL 111-76-2 3

5 PRESERVATIVE AGENT MIXTURE 0.100

6 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

8 DEINOIZED WATER 7732 – 18-5 85

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add nonylphenol ethoxylate and stirr well. Dissolve nonylphenol
ethoxylate in the water completely. Add remainder of ingredients during
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 5 and 1 : 10 ratio with deionized water to use car interior cleaning.

** 135 **
 CONCENTRATED AND SOLVENT ADDED
CAR INTERIOR CLEANER
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 GLUCOPON 215 68515-73-1 5

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

3 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 5

4 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 5

5 PRESERVATIVE AGENT MIXTURE 0.100

6 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

8 DEINOIZED WATER 7732 – 18-5 82.75

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add glucopon 215 and stirr well. Dissolve glucopon 215 in the water
completely. Add remainder of ingredients during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 5 and 1 : 10 ratio with deionized water to use car interior cleaning.

** 136 **
 CONCENTRATED AND SOLVENT ADDED
CAR INTERIOR CLEANER
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 C13 – C15 OXO ALCOHOL 3EO NONIONIC 3

2 C13 – C15 OXO ALCOHOL 5EO NONIONIC 5

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

4 ETHYL ALCOHOL 64 – 17 – 5 5

5 PRESERVATIVE AGENT MIXTURE 0.100

6 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

7 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

8 DEINOIZED WATER 7732 – 18-5 84.75

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add oxo alcohols and stirr well. Dissolve oxo alcohols in the water
completely. Add remainder of ingredients during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 5 and 1 : 10 ratio with deionized water to use car interior cleaning.

** 137 **
 CAR
INTERIOR CLEANING SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016-45-9 2

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.5

3 TETRASODIUM EDTA 10378-23-1 0.3

4 PRESERVATIVE AGENT MIXTURE 0.100

5 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

6 DEIONIZED WATER 7732 – 18-5 97

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add nonylphenol ethoxylate and stirr well. Dissolve nonylphenol
ethoxylate in the water completely. Add remainder of ingredients during
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 138 **
 CAR
INTERIOR CLEANING SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 GLUCOPON 215 68515-73-1 1

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 1

3 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 0.8

4 PRESERVATIVE AGENT MIXTURE 0.100

5 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

6 DEIONIZED WATER 7732 – 18-5 97

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add glucopon 215 and stirr well. Dissolve glucopon 215 in the water
completely. Add remainder of ingredients during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 139 **
 CAR
INTERIOR CLEANING SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 C13 – C15 OXO ALCOHOL 3EO NONIONIC 1

2 C13 – C15 OXO ALCOHOL 5EO NONIONIC 1

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.5

4 SODIUM HEXAMETAPHOSPHATE 10124- 56-8 0.5

5 PRESERVATIVE AGENT MIXTURE 0.100

6 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

7 DEIONIZED WATER 7732 – 18-5 96.75

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add oxo alcohols and stirr well. Dissolve oxo alcohols in the water
completely. Add remainder of ingredients during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 140 **
 SOLVENT BASED
CAR INTERIOR CLEANING SPRAY
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016-45-9 1

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.5

3 TETRASODIUM EDTA 10378-23-1 0.300

4 BUTYL GLYCOL 111-76-2 1

5 PRESERVATIVE AGENT MIXTURE 0.100

6 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

7 DEIONIZED WATER 7732 – 18-5 97

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add nonylphenol ethoxylate and stirr well. Dissolve nonylphenol
ethoxylate in the water completely. Add remainder of ingredients during
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 141 **
 SOLVENT BASED
CAR INTERIOR CLEANING SPRAY
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 GLUCOPON 215 68515-73-1 2

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.5

3 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 2

4 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 0.5

5 PRESERVATIVE AGENT MIXTURE 0.100

6 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

7 DEIONIZED WATER 7732 – 18-5 94.8

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add glucopon 215 and stirr well. Dissolve glucopon 215 in the water
completely. Add remainder of ingredients during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 142 **
 SOLVENT BASED
CAR INTERIOR CLEANING SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 C13 – C15 OXO ALCOHOL 3EO NONIONIC 1

2 C13 – C15 OXO ALCOHOL 5EO NONIONIC 1

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.300

4 ETHYL ALCOHOL 64 – 17 – 5 2

5 PRESERVATIVE AGENT MIXTURE 0.100

6 FRAGRANCE ( ANY ODOR ) MIXTURE 0.100

7 DEIONIZED WATER 7732 – 18-5 95.5

TOTAL 100

PROCESS: Charge deionized water in the process tank. Start to mix.

Add oxo alcohols and stirr well. Dissolve oxo alcohols in the water
completely. Add remainder of ingredients during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 143 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR

DASHBOARD POLISH

PRODUCTS

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
CAR DASHBOARD SILICONE WAX CREAM
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 55

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 5

3 SILICONE THICKENER AGENT MIXTURE 5

4 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 DEIONIZED WATER 7732 – 18-5 34.800

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and stirr well. Dissolve nonylphenol ethoxylate
in the silicone oil completely. Add water part to part and slowly while
stirring. Add potassium sorbate and sodium benzoate during mixing.
Finally, add silicone thickener agent. Continue to stirr until mixture is
homogenous and cream form. Homogenous and cream form is enough.
Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 6 and 1 : 7 with deionized water to use car dashboard polisher wax as

cream.

** 144 **
 CONCENTRATED
CAR DASHBOARD SILICONE WAX CREAM
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 45

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 4.5

3 COCAMIDE DEA 68603 - 42-9 0.5

4 SILICONE THICKENER AGENT MIXTURE 4

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 DEIONIZED WATER 7732 – 18-5 45.800

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil completely. Add water
part to part and slowly while stirring. Add potassium sorbate and sodium
benzoate during mixing. Finally, add silicone thickener agent. Continue
to stirr until mixture is homogenous and cream form. Homogenous and
cream form is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 4 and 1 : 5 with deionized water to use car dashboard polisher wax as

cream.

** 145 **
 CONCENTRATED
CAR DASHBOARD SILICONE WAX CREAM
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 35

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 3

3 COCAMIDE DEA 68603 - 42-9 0.5

4 SILICONE THICKENER AGENT MIXTURE 3

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 DEIONIZED WATER 7732 – 18-5 58.300

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil completely. Add water
part to part and slowly while stirring. Add potassium sorbate and sodium
benzoate during mixing. Finally, add silicone thickener agent. Continue
to stirr until mixture is homogenous and cream form. Homogenous and
cream is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 3 and 1 : 4 with deionized water to use car dashboard polisher wax as

cream.

** 146 **
 CONCENTRATED AND PERFUME ADDED
CAR DASHBOARD SILICONE WAX CREAM
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 55

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 5

3 SILICONE THICKENER AGENT MIXTURE 5

4 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 FRAGRANCE ( ANY PERFUME ) MIXTURE 0.300

7 DEIONIZED WATER 7732 – 16-5 34.500

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and stirr well. Dissolve nonylphenol ethoxylate
in the silicone oil completely. Add water part to part and slowly while
stirring. Add potassium sorbate, perfume and sodium benzoate during
mixing. Finally, add silicone thickener agent. Continue to stirr until
mixture is homogenous and cream form. Homogenous and cream form
is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 6 and 1 : 7 with deionized water to use car dashboard polisher wax as

cream.

** 147 **
 CONCENTRATED AND PERFUME ADDED
CAR DASHBOARD SILICONE WAX CREAM
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 45

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 4.5

3 COCAMIDE DEA 68603 - 42-9 0.5

4 SILICONE THICKENER AGENT MIXTURE 4

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 FRAGRANCE ( ANY ODOR ) MIXTURE 0.300

8 DEIONIZED WATER 7732 – 18-5 45.500

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil completely. Add water
part to part and slowly while stirring. Add potassium sorbate, perfume
and sodium benzoate during mixing. Finally, add silicone thickener
agent. Continue to stirr until mixture is homogenous and cream form.
Homogenous and cream form is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 4 and 1 : 5 with deionized water to use car dashboard polisher wax as

cream.

** 148 **
 CONCENTRATED AND PERFUME ADDED
CAR DASHBOARD SILICONE WAX CREAM
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 35

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 3

3 COCAMIDE DEA 68603 - 42-9 0.5

4 SILICONE THICKENER AGENT MIXTURE 3

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 FRAGRANCE ( ANY PERFUME ) MIXTURE 0.300

8 DEIONIZED WATER 7732 – 18-5 58

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and cocamide dea. Dissolve nonylphenol
ethoxylate and cocamide dea in the silicone oil completely. Add water
part to part and slowly while stirring. Add potassium sorbate, perfume
and sodium benzoate during mixing. Finally, add silicone thickener
agent. Continue to stirr until mixture is homogenous and cream form.
Homogenous and cream form is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 3 and 1 : 4 with deionized water to use car dashboard polisher wax as

cream.

** 149 **
 CONCENTRATED
CAR DASHBOARD LIQUID POLISH
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 60

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 4

3 HYDROGENATED CASTOR OIL 8001 – 78 -3 2

4 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 DEIONIZED WATER 7732 – 18-5 33.800

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and hydrogenated castor oil. Dissolve
nonylphenol ethoxylate and hydrogenated castor oil in the silicone oil
completely. Add water part to part and slowly while stirring. Add
potassium sorbate and sodium benzoate during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 6 and 1 : 7 with deionized water to use car dashboard liquid polisher.

** 150 **
 CONCENTRATED
CAR DASHBOARD LIQUID POLISH
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 50

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 3.5

3 COCAMIDE DEA 68603 - 42-9 0.5

4 HYDROGENATED CASTOR OIL 8001 – 78-3 1

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 DEIONIZED WATER 7732 – 18-5 44.800

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate, hydrogenated castor oil and cocamide dea.
Dissolve all emulsifiers in the silicone oil completely. Add water part to
part and slowly while stirring. Add potassium sorbate and sodium
benzoate during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 4 and 1 : 5 with deionized water to use car dashboard liquid polisher.

** 151 **
 CONCENTRATED
CAR DASHBOARD LIQUID POLISH
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 40

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 2.5

3 COCAMIDE DEA 68603 - 42-9 0.5

4 HYDROGENATED CASTOR OIL 8001 – 78-3 1

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 DEIONIZED WATER 7732 – 18-5 55.800

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate, hydrogenated castor oil and cocamide dea.
Dissolve all emulsifiers in the silicone oil completely. Add water part to
part and slowly while stirring. Add potassium sorbate and sodium
benzoate during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 3 and 1 : 4 with deionized water to use car dashboard liquid polisher.

** 152 **
 CONCENTRATED AND PERFUME ADDED
CAR DASHBOARD LIQUID POLISH SILICONE
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 55

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 4.5

3 HYDROGENATED CASTOR OIL 8001 – 78-3 0.5

4 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 FRAGRANCE ( ANY PERFUME ) MIXTURE 0.300

7 DEIONIZED WATER 7732 – 16-5 39.500

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and hydrogenated castor oil. Dissolve
nonylphenol ethoxylate and hydrogenated castor oil in the silicone oil
completely. Add water part to part and slowly while stirring. Add
potassium sorbate, perfume and sodium benzoate during mixing.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.
NOTE: Amount of ingredients used above formulation can be changed
depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 6 and 1 : 7 with deionized water to use car dashboard liquid polish.

** 153 **
 CONCENTRATED AND PERFUME ADDED
CAR DASHBOARD LIQUID POLISH SILICONE
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 45

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 1.5

3 COCAMIDE DEA 68603 - 42-9 1

4 HYDROGENATED CASTOR OIL 8001 – 78 -3 2

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 FRAGRANCE ( ANY ODOR ) MIXTURE 0.300

8 DEIONIZED WATER 7732 – 18-5 50

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate, hydrogenated castor oil and cocamide dea.
Dissolve all emulsifiers in the silicone oil completely. Add water part to
part and slowly while stirring. Add potassium sorbate, perfume and
sodium benzoate during mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 4 and 1 : 5 with deionized water to use car dashboard liquid polish.

** 154 **
 CONCENTRATED AND PERFUME ADDED
CAR DASHBOARD LIQUID POLISH SILICONE
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 35

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 1

3 COCAMIDE DEA 68603 - 42-9 0.5

4 HYDROGENATED CASTOR OIL 8001 – 78-3 2

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 FRAGRANCE ( ANY PERFUME ) MIXTURE 0.300

8 DEIONIZED WATER 7732 – 18-5 61

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate, hydrogenated castor oil and cocamide dea.
Dissolve emulsifiers in the silicone oil completely. Add water part to part
and slowly while stirring. Add potassium sorbate, perfume and sodium
benzoate during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is concentrated and diluted

1 : 3 and 1 : 4 with deionized water to use car dashboard liquid polish.

** 155 **
 CAR
DASHBOARD POLISH SPRAY
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 5

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.3

3 HYDROGENATED CASTOR OIL 8001 – 78 -3 0.2

4 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 DEIONIZED WATER 7732 – 18-5 94.300

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and hydrogenated castor oil. Dissolve
nonylphenol ethoxylate and hydrogenated castor oil in the silicone oil
completely. Add water part to part and slowly while stirring. Add
potassium sorbate and sodium benzoate during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 156 **
 CAR
DASHBOARD POLISH SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 4

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.200

3 COCAMIDE DEA 68603 - 42-9 0.100

4 HYDROGENATED CASTOR OIL 8001 – 78-3 0.100

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 DEIONIZED WATER 7732 – 18-5 95.400

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate, hydrogenated castor oil and cocamide dea.
Dissolve all emulsifiers in the silicone oil completely. Add water part to
part and slowly while stirring. Add potassium sorbate and sodium
benzoate during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 157 **
 CAR
DASHBOARD POLISH SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 4

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.150

3 COCAMIDE DEA 68603 - 42-9 0.150

4 HYDROGENATED CASTOR OIL 8001 – 78-3 0.100

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 DEIONIZED WATER 7732 – 18-5 95.400

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate, hydrogenated castor oil and cocamide dea.
Dissolve all emulsifiers in the silicone oil completely. Add water part to
part and slowly while stirring. Add potassium sorbate and sodium
benzoate during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 158 **
 CAR
DASHBOARD PERFUME ADDED POLISH SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 5.5

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.150

3 HYDROGENATED CASTOR OIL 8001 – 78-3 0.400

4 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 FRAGRANCE ( ANY PERFUME ) MIXTURE 0.200

7 DEIONIZED WATER 7732 – 16-5 93.550

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate and hydrogenated castor oil. Dissolve
nonylphenol ethoxylate and hydrogenated castor oil in the silicone oil
completely. Add water part to part and slowly while stirring. Add
potassium sorbate, perfume and sodium benzoate during mixing.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 159 **
 CAR
DASHBOARD PERFUME ADDED POLISH SPRAY
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 4

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.150

3 COCAMIDE DEA 68603 - 42-9 0.100

4 HYDROGENATED CASTOR OIL 8001 – 78 -3 0.150

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 FRAGRANCE ( ANY ODOR ) MIXTURE 0.200

8 DEIONIZED WATER 7732 – 18-5 95.200

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate, hydrogenated castor oil and cocamide dea.
Dissolve all emulsifiers in the silicone oil completely. Add water part to
part and slowly while stirring. Add potassium sorbate, perfume and
sodium benzoate during mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 160 **
 CAR
DASHBOARD PERFUME ADDED POLISH SPRAY
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 3.5

2 NONYLPHENOL ETHOXYLATE 6 9016-45-9 0.100

3 COCAMIDE DEA 68603 - 42-9 0.100

4 HYDROGENATED CASTOR OIL 8001 – 78-3 0.150

5 SODIUM BENZOATE 532 – 32 -1 0.100

( Preservative Agent )

6 POTASSIUM SORBATE 690 – 00-1 0.100

( Preservative Agent )

7 FRAGRANCE ( ANY PERFUME ) MIXTURE 0.200

8 DEIONIZED WATER 7732 – 18-5 95.750

TOTAL 100

PROCESS: Charge silicone oil in the process tank. Start to mix. Add
nonylphenol ethoxylate, hydrogenated castor oil and cocamide dea.
Dissolve emulsifiers in the silicone oil completely. Add water part to part
and slowly while stirring. Add potassium sorbate, perfume and sodium
benzoate during mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 161 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR

PERFUME

PRODUCTS

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CAR
PERFUME BOTTLE
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 ESSENCE ( WATER BASED ) MIXTURE 4

2 GLYCERINE 56 – 81 – 5 1

3 IZOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 10

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 PRESERVATIVE AGENT MIXTURE 0.100

6 DEIONIZED WATER 7732 – 18-5 84.850

TOTAL 100

PROCESS: Charge isopropyl alcohol and essence in the process

tank. Start to mix. Add glycerine and mix well. Add water during mixing.
Add food dye and preservative agent while stirring. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is filled to bottle and used in the
car as odor.

** 162 **
 CAR
PERFUME BOTTLE
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 ESSENCE ( WATER BASED ) MIXTURE 4

2 GLYCERINE 56 – 81 – 5 0.5

3 ETHYL ALCOHOL 64 – 17 – 5 8

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 PRESERVATIVE AGENT MIXTURE 0.100

6 DEIONIZED WATER 7732 – 18-5 87.350

TOTAL 100

PROCESS: Charge ethyl alcohol and essence in the process tank.

Start to mix. Add glycerine and mix well. Add water during mixing. Add
food dye and preservative agent while stirring. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is filled to bottle and used in the
car as odor.

** 163 **
 CAR
PERFUME BOTTLE
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 ESSENCE ( WATER BASED ) MIXTURE 4

2 GLYCERINE 56 – 81 – 5 0.5

3 ETHYL ALCOHOL 64 – 17 – 5 5

4 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 5

5 PRESERVATIVE AGENT MIXTURE 0.100

6 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

7 DEIONIZED WATER 7732 – 18-5 85.350

TOTAL 100

PROCESS: Charge ethyl alcohol, isopropyl alcohol and essence in the

process tank. Start to mix. Add glycerine and mix well. Add water during
mixing. Add food dye and preservative agent while stirring. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is filled to bottle and used in the
car as odor.

** 164 **
 CAR
PERFUME SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 ESSENCE ( WATER BASED ) MIXTURE 5

2 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 15

3 DEIONIZED WATER 7732 – 18-5 80

TOTAL 100

PROCESS: Charge isopropyl alcohol and essence in the process

tank. Start to mix. Add water during mixing. Continue to stirr until mixture
is homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 165 **
 CAR
PERFUME SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 ESSENCE ( WATER BASED ) MIXTURE 6

2 ETHYL ALCOHOL 64 – 17 – 5 14

3 DEIONIZED WATER 7732 – 18-5 80

TOTAL 100

PROCESS: Charge ethyl alcohol and essence in the process tank.

Start to mix. Add water during mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 166 **
 CAR
PERFUME SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 ESSENCE ( WATER BASED ) MIXTURE 5

2 ETHYL ALCOHOL 64 – 17 – 5 5

3 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 5

4 DEIONIZED WATER 7732 – 18-5 85

TOTAL 100

PROCESS: Charge ethyl alcohol, isopropyl alcohol and essence in the

process tank. Start to mix. Add water during mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 167 **
 HANDING PAPER
CAR PERFUME
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 ESSENCE ( OIL BASED ) MIXTURE 7

2 HYDROGENATED CASTOR OIL 8001 – 78-3 7

3 GLYCERINE 56 – 81 – 5 1

4 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 5

5 DEIONIZED WATER 7732 – 18-5 80

TOTAL 100

PROCESS: Charge hydrogenated castor oil and essence in the

process tank. Start to mix. Add glycerine and isopropyl alcohol during
mixing. Add water while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is liquid using for handing paper
car perfume and used by packing machine automatically.

** 168 **
 HANDING PAPER
CAR PERFUME
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 ESSENCE ( OIL BASED ) MIXTURE 5

2 NONYLPHENOL ETHOXYLATE 10 9016-45 - 9 10

3 GLYCERINE 56 – 81 – 5 0.900

4 ETHYL ALCOHOL 64 – 17 – 5 5

5 ANTIFOAM AGENT MIXTURE 0.100

6 DEIONIZED WATER 7732 – 18-5 79

TOTAL 100

PROCESS: Charge nonylphenol ethoxylate, ethyl alcohol and

essence in the process tank. Start to mix. Add glycerine and antifoam
agent. Add water while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is liquid using for handing paper
car perfume and used by packing machine automatically.

** 169 **
 HANDING PAPER
CAR PERFUME
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 ESSENCE ( OIL BASED ) MIXTURE 6

2 NONYLPHENOL ETHOXYLATE 10 9016-45 - 9 11

3 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 3

4 ETHYL ALCOHOL 64 – 17 – 5 2

5 ANTIFOAM AGENT MIXTURE 0.100

6 DEIONIZED WATER 7732 – 18-5 77.900

TOTAL 100

PROCESS: Charge nonylphenol ethoxylate, ethyl alcohol, isopropyl

alcohol and essence in the process tank. Start to mix. Add antifoam
agent. Add water while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is liquid using for handing paper
car perfume and used by packing machine automatically.

** 170 **
 CAR
PERFUME GEL
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 CARBOPOL 940 ( CARBOMER ) POLYMER 0.600

2 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 0.600

3 ESSENCE ( OIL BASED ) MIXTURE 5

4 EUMILGINE L ( TRADE NAME ) MIXTURE 5

5 ETHYL ALCOHOL 64 – 17 – 5 5

6 PERSERVATIVE AGENT MIXTURE 0.050

7 FOOD DYES(ANY COLOR AND POWDER) MIXTURE 0.050

8 DEINOIZED WATER 7732 – 18-5 83.700

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

carbopol. Mix carpobol in the water completely. Wait a day to swell
carbomer in the water very well. The day after, Add all ingredients
( Except triethanolamine ) in the order given while stirring. Then, add
triethanolamine slowly until mixture is gel. Continue to stirr until mixture
is homogenous and gel desired. Homogenous and desired gel is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is filled to different pack and

used to car odor gel.

** 171 **
 CAR
PERFUME GEL
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 CARBOPOL 940 ( CARBOMER ) POLYMER 0.700

2 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 0.700

3 ESSENCE ( WATER BASED ) MIXTURE 5

4 GLYCERINE 56 – 81 – 5 1

5 ETHYL ALCOHOL 64 – 17 – 5 5

6 PERSERVATIVE AGENT MIXTURE 0.050

7 FOOD DYES(ANY COLOR AND POWDER) MIXTURE 0.050

8 DEINOIZED WATER 7732 – 18-5 87.500

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

carbopol. Mix carpobol in the water completely. Wait a day to swell
carbomer in the water very well. The day after, Add all ingredients
( Except triethanolamine ) in the order given while stirring. Then, add
triethanolamine slowly until mixture is gel. Continue to stirr until mixture
is homogenous and gel desired. Homogenous and desired gel is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is filled to different pack and

used to car odor gel.

** 172 **
 CAR
PERFUME GEL
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 CARBOPOL 940 ( CARBOMER ) POLYMER 0.750

2 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 0.750

3 ESSENCE ( WATER BASED ) MIXTURE 5

4 ISOPROPYL ALCOHOL ( IPA ) 56 – 81 – 5 5

5 ETHYL ALCOHOL 64 – 17 – 5 5

6 PERSERVATIVE AGENT MIXTURE 0.050

7 FOOD DYES(ANY COLOR AND POWDER) MIXTURE 0.050

8 DEINOIZED WATER 7732 – 18-5 83.400

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

carbopol. Mix carpobol in the water completely. Wait a day to swell
carbomer in the water very well. The day after, Add all ingredients
( Except triethanolamine ) in the order given while stirring. Then, add
triethanolamine slowly until mixture is gel. Continue to stirr until mixture
is homogenous and gel desired. Homogenous and desired gel is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

NOTE: The above formulated product is filled to different pack and

used to car odor gel.

** 173 **
 CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR

HEADLIGHT LENS

CLEANER AND RESTORER

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 HEADLIGHT LENS
CLEANER AND RESTORER CREAM
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 3
ACID ( LABSA )

2 COCAMIDE DEA 68603-42-9 2

3 SODIUM LAURYL ETHER SULFATE 68585-34-2 1.5

( SLES )

4 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 0.400

5 SODIUM CARBONATE 497 – 19-8 2

6 CALCITE ( THICK MICRONS ) MINERAL 40

NATURAL

7 DEIONIZED WATER 7732 – 18-5 51.100

TOTAL 100

PROCESS: Charge water and sles in the process tank. Start to mix.
Dissolve sles in the water completely. Add labsa, cocamide and sodium
hydroxide while constant mixing. Add sodium carbonate and mix well.
Add calcite during constant stirring. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to headlight lens as

rubbing. Then cleaning with water very well.

** 174 **
 HEADLIGHT LENS
CLEANER AND RESTORER CREAM
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 2
ACID ( LABSA )

2 COCAMIDE DEA 68603-42-9 2

3 SODIUM LAURYL ETHER SULFATE 68585-34-2 1

( SLES )

4 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 0.300

5 SODIUM CARBONATE 497 – 19-8 2

6 CALCITE ( THICK MICRONS ) MINERAL 50

NATURAL

7 SODIUM TRIPOLYPHOSPHATE ( STTP ) 7758 – 29-4 3

8 DEINOIZED WATER 7732 – 18-5 39.700

TOTAL 100

PROCESS: Charge water and sles in the process tank. Start to mix.
Dissolve sles in the water completely. Add labsa, cocamide and sodium
hydroxide while constant mixing. Add sodium carbonate and sodium
tripolyphosphate. Add calcite during constant stirring. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to headlight lens as

rubbing. Then cleaning with water very well.

** 175 **
 HEADLIGHT LENS
CLEANER AND RESTORER CREAM
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 POTASSIUM TRIPOLYPHOSPHATE 13845 -36-8 10

2 CLUCOPON 215 ( BASF, TRADE NAME ) MIXTURE 10

3 SODIUM LAURYL ETHER SULFATE 68585-34-2 10

(SLES)

4 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 5

5 SODIUM CARBONATE 497 – 19-8 5

6 CALCITE ( THICK MICRONS ) MINERAL 30

NATURAL

7 DEIONIZED WATER 7732 – 18-5 30

TOTAL 100

PROCESS: Charge water and sles in the process tank. Start to mix.
Dissolve sles in the water completely. Add potassium tripolyphosphate
and glucopon during constant stirring. Add sodium hydroxide and
sodium carbonate in the given order and mix well. Add calcite whie
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to headlight lens as

rubbing. Then cleaning with water very well.

** 176 **
 HEADLIGHT LENS
CLEANER AND RESTORER PASTE
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 4.5
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 1.5

ACID ( LABSA )

3 ETIDRONIC ACID ( % 60 ) 2809 – 21 -4 7

4 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 3

5 CALCITE ( THICK MICRONS ) MINERAL 40

6 DEIONIZED WATER 7732 –18 - 5 44

TOTAL 100

PROCESS: Charge water and sles in the process tank. Start to mix.
Dissolve sles in the water completely. Add etidronic acid and labsa
during constant stirring. Add sodium hydroxide and mix well. Add calcite
slowly while mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed. When wait 1 – 2 hour,
product will be paste.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to headlight lens as

rubbing. Then cleaning with water very well.

** 177 **
 HEADLIGHT LENS
CLEANER AND RESTORER PASTE
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 3
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 1

ACID ( LABSA )

3 ETIDRONIC ACID ( % 60 ) 2809 – 21 -4 4

4 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 3

5 SODIUM TRIPOLYPHOSPHATE ( STTP ) 7758 – 29-4 2

6 CALCITE ( THICK MICRONS ) MINERAL 55

7 DEINOIZED WATER 7732 –18 - 5 32

TOTAL 100

PROCESS: Charge water and sles in the process tank. Start to mix.
Dissolve sles in the water completely. Add etidronic acid and labsa
during constant stirring. Add sodium hydroxide and sodium
tripolyphosphate in the given order and mix well. Add calcite slowly while
mixing. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed. When wait 1 – 2 hour, product will be
paste.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to headlight lens as

rubbing. Then cleaning with water very well.

** 178 **
 HEADLIGHT LENS
CLEANER AND RESTORER PASTE
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585-34-2 3
( SLES )

2 LINEAR ALKYLBENZENE SULFONIC 27176-87-0 0.5

ACID ( LABSA )

3 ETIDRONIC ACID ( % 60 ) 2809 – 21 -4 5

4 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 3.5

5 SODIUM TRIPOLYPHOSPHATE ( STTP ) 7758 – 29-4 2

6 BUTYL GLYCOL 111-76-2 2

7 CALCITE ( THICK MICRONS ) MINERAL 50

8 DEINOIZED WATER 7732 – 18-5 34

TOTAL 100

PROCESS: Charge water and sles in the process tank. Start to mix.
Dissolve sles in the water completely. Add butyl glycol and mix well. Add
etidronic acid and labsa during constant stirring. Add sodium hydroxide
and sodium tripolyphosphate in the given order and mix well. Add calcite
slowly while mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed. When wait 1 – 2 hour,
product will be paste.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to headlight lens as

rubbing. Then cleaning with water very well.

** 179 **
 HEADLIGHT LENS
CLEANER AND RESTORER SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETOXYLATE 10 9016-45 - 9 1

2 ETIDRONIC ACID ( % 60 ) 2809 – 21 -4 2

3 SULFAMIC ACID 5329 –14 - 6 2

4 SODIUM TRIPOLYPHOSPHATE ( STTP ) 7758 – 29-4 1

5 DEINOIZED WATER 7732 – 18-5 94

TOTAL 100

PROCESS: Charge water in the process tank and add nonylphenol

ethoxylate. Start to mix. Dissolve nonylphenol ethoxylate in the water
completely. Add all ingredients in the given order during constant mixing.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 180 **
 HEADLIGHT LENS
CLEANER AND RESTORER SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 C13 – 15 OXO ALCOHOL 3 EO MIXTURE 1

2 ETIDRONIC ACID ( % 60 ) 2809 – 21 -4 2

3 SULFAMIC ACID 5329 –14 - 6 2

4 HYDROFLUORIC ACID MIXTURE 0.5

5 DEINOIZED WATER 7732 – 18-5 94.500

TOTAL 100

PROCESS: Charge water in the process tank and add oxo alcohol.
Start to mix. Dissolve oxo alcohol in the water completely. Add all
ingredients in the given order during constant mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 181 **
 HEADLIGHT LENS
CLEANER AND RESTORER SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 C13 – 15 OXO ALCOHOL 3 EO MIXTURE 0.5

2 METHYL ALCOHOL 67 – 56 - 1 2

3 BUTYL GLYCOL 111 – 76 - 2 2.5

4 DEINOIZED WATER 7732 – 18-5 95

TOTAL 100

PROCESS: Charge water in the process tank and add oxo alcohol.
Start to mix. Dissolve oxo alcohol in the water completely. Add all
ingredients in the given order during constant mixing. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 182 **
 CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR

SCRATCH REMOVER

WAX

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CAR
THIN SCRATCH REMOVER
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SUNFLOWER OIL NATURAL 16

2 COCAMIDE DEA 68603-42-9 8

3 CALCITE ( THIN MICRONS ) MINERAL 50

4 KEROSENE MIXTURE 1

5 DEIONIZED WATER 7732 – 18-5 25

TOTAL 100

PROCESS: Charge sunflower oil and cocamide dea in the process

tank. Start to mix. Add water slowly while mixing. Add calcite during
constant stirring. Finally, add kerosene and mix well. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to car as rubbing to

remove scratch on the car.

** 183 **
 CAR
THIN SCRATCH REMOVER
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SUNFLOWER OIL NATURAL 16

2 COCAMIDE DEA 68603-42-9 6

3 CALCITE ( THIN MICRONS ) MINERAL 60

4 KEROSENE MIXTURE 1

5 DEIONIZED WATER 7732 – 18-5 17

TOTAL 100

PROCESS: Charge sunflower oil and cocamide dea in the process

tank. Start to mix. Add water slowly while mixing. Add calcite during
constant stirring. Finally, add kerosene and mix well. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to car as rubbing to

remove scratch on the car.

** 184 **
 CAR
THIN SCRATCH REMOVER
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SUNFLOWER OIL NATURAL 15

2 OLIVE OIL 68603-42-9 6

3 CALCITE ( THIN MICRONS ) MINERAL 50

4 SILICONE OIL MIXTURE 2

5 COCAMIDE DEA 68603 –42-9 6

6 DEIONIZED WATER 7732 – 18-5 21

TOTAL 100

PROCESS: Charge sunflower oil, olive oil and cocamide dea in the
process tank. Start to mix. Add water slowly while mixing. Add calcite
during constant stirring. Finally, add silicone oil and mix well. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to car as rubbing to

remove scratch on the car.

** 185 **
 CAR
THICK SCRATCH REMOVER
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SUNFLOWER OIL NATURAL 16

2 COCAMIDE DEA 68603-42-9 8

3 CALCITE ( THICK MICRONS ) MINERAL 50

4 KEROSENE MIXTURE 1

5 DEIONIZED WATER 7732 – 18-5 25

TOTAL 100

PROCESS: Charge sunflower oil and cocamide dea in the process

tank. Start to mix. Add water slowly while mixing. Add calcite during
constant stirring. Finally, add kerosene and mix well. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to car as rubbing to

remove scratch on the car.

** 186 **
 CAR
THICK SCRATCH REMOVER
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SUNFLOWER OIL NATURAL 16

2 COCAMIDE DEA 68603-42-9 5

3 CALCITE ( THICK MICRONS ) MINERAL 57

4 KEROSENE MIXTURE 1.5

5 DEIONIZED WATER 7732 – 18-5 20.5

TOTAL 100

PROCESS: Charge sunflower oil and cocamide dea in the process

tank. Start to mix. Add water slowly while mixing. Add calcite during
constant stirring. Finally, add kerosene and mix well. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to car as rubbing to

remove scratch on the car.

** 187 **
 CAR
THICK SCRATCH REMOVER
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SUNFLOWER OIL NATURAL 13

2 OLIVE OIL 68603-42-9 4

3 CALCITE ( THICK MICRONS ) MINERAL 60

4 SILICONE OIL MIXTURE 2

5 COCAMIDE DEA 68603 –42-9 5

6 DEIONIZED WATER 7732 – 18-5 16

TOTAL 100

PROCESS: Charge sunflower oil, olive oil and cocamide dea in the
process tank. Start to mix. Add water slowly while mixing. Add calcite
during constant stirring. Finally, add silicone oil and mix well. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is applied to car as rubbing to

remove scratch on the car.

** 188 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

WINDSHIELD

DE - ICER

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
WINDSHIELD DE - ICER
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 POTASSIUM ACETATE 127 – 08-2 25

2 METHYL ALCOHOL 67 – 56 – 1 10

3 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 1

4 DEIONIZED WATER 7732 – 18-5 64

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Potassium

acetate and mix well. Add methyl alcohol and triethanolamine while
constant stirring. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 10 or 1: 15

** 189 **
 CONCENTRATED
WINDSHIELD DE - ICER
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 POTASSIUM ACETATE 127 – 08-2 15

2 METHYL ALCOHOL 67 – 56 – 1 10

3 ISOPROPYL ALCOHOL ( TEA ) 67 – 63 – 0 20

4 TRIETHANOLAMINE ( TEA ) 102 – 71 - 6 1

5 DEIONIZED WATER 7732 – 18-5 54

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Potassium

acetate and mix well. Add isopropyl alcohol. Add methyl alcohol and
triethanolamine while constant stirring. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 15 or 1: 20

** 190 **
 CONCENTRATED
WINDSHIELD DE - ICER
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 POTASSIUM ACETATE 127 – 08-2 15

2 ETHYL ALCOHOL 64 – 17 – 5 25

3 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 1

4 DEIONIZED WATER 7732 – 18-5 59

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Potassium

acetate and mix well. Add ethyl alcohol and triethanolamine while
constant stirring. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 15 or 1: 20

** 191 **
 CONCENTRATED
WINDSHIELD DE - ICER
PRODUCTION PROCESS – 4

NO CAS W/W
INGREDIENTS NUMBER
1 ETHYL ALCOHOL 127 – 08-2 20

2 METHYL ALCOHOL 67 – 56 – 1 20

3 ISOPROPYL ALCOHOL ( TEA ) 67 – 63 – 0 20

4 TRIETHANOLAMINE ( TEA ) 102 – 71 - 6 1

5 DEIONIZED WATER 7732 – 18-5 39

TOTAL 100

PROCESS: Charge water and ethyl alcohol in the process tank. Start
to mix. Add isopropyl alcohol. Add methyl alcohol and triethanolamine
while constant stirring. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 25 or 1: 30

** 192 **
 WINDSHIELD
DE – ICER SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 POTASSIUM ACETATE 127 – 08-2 3

2 METHYL ALCOHOL 67 – 56 – 1 6

3 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 1

4 DEIONIZED WATER 7732 – 18-5 90

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Potassium

acetate and mix well. Add methyl alcohol and triethanolamine while
constant stirring. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 193 **
 WINDSHIELD
DE – ICER SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 POTASSIUM ACETATE 127 – 08-2 3

2 METHYL ALCOHOL 67 – 56 – 1 5

3 ISOPROPYL ALCOHOL ( TEA ) 67 – 63 – 0 2

4 TRIETHANOLAMINE ( TEA ) 102 – 71 - 6 1

5 DEIONIZED WATER 7732 – 18-5 89

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Potassium

acetate and mix well. Add isopropyl alcohol. Add methyl alcohol and
triethanolamine while constant stirring. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 194 **
 WINDSHIELD
DE – ICER SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 POTASSIUM ACETATE 127 – 08-2 5

2 ETHYL ALCOHOL 64 – 17 – 5 4

3 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 1

4 DEIONIZED WATER 7732 – 18-5 90

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Potassium

acetate and mix well. Add ethyl alcohol and triethanolamine while
constant stirring. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 195 **
 WINDSHIELD
DE – ICER SPRAY
PRODUCTION PROCESS – 4

NO CAS W/W
INGREDIENTS NUMBER
1 ETHYL ALCOHOL 127 – 08-2 4

2 METHYL ALCOHOL 67 – 56 – 1 3

3 ISOPROPYL ALCOHOL ( TEA ) 67 – 63 – 0 5

4 TRIETHANOLAMINE ( TEA ) 102 – 71 - 6 1

5 DEIONIZED WATER 7732 – 18-5 87

TOTAL 100

PROCESS: Charge water and ethyl alcohol in the process tank. Start
to mix. Add isopropyl alcohol. Add methyl alcohol and triethanolamine
while constant stirring. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 196 **
 CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR

AIR CONDITIONING

DISINFECTANT
&
CLEANER

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
CAR AIR CONDITIONING DISINFECTANT
AND CLEANER
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 GLUCOPON 215 ( TRADE NAME ) MIXTURE 1

2 ETHYL ALCOHOL 127 – 08-2 30

3 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 5

4 BENZALKONIUM CHLORIDE ( % 50 ) 8001 – 54 -5 10

5 BENZALTRIAZOLE 1.2.3 ( INHIBITOR ) 95 – 14 - 7 0.250

6 DEINOIZED WATER 7732 – 18-5 53.75

TOTAL 100

PROCESS: Charge water in the process tank and add glucopon. Start
to mix. Dissolve glucopon in the water completely. Add sodium
hydroxide and benzaltriazole while mixing. Add sodium hydroxide and
stirr well. Finally, add ethyl alcohol during constant mixing. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 25 or 1: 30

** 197 **
 CONCENTRATED
CAR AIR CONDITIONING DISINFECTANT
AND CLEANER
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 ALKYL POLYGLUCOSIDE 68515-73-1 2

2 ETHYL ALCOHOL 127 – 08-2 25

3 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 5

4 BENZALKONIUM CHLORIDE ( % 50 ) 8001 – 54 -5 8

5 BENZALTRIAZOLE 1.2.3 ( INHIBITOR ) 95 – 14 - 7 0.200

6 DEINOIZED WATER 7732 – 18-5 59.800

TOTAL 100

PROCESS: Charge water in the process tank and add alkyl

polyglucoside. Start to mix. Dissolve alkyl polyglucoside in the water
completely. Add sodium hydroxide and benzaltriazole while mixing. Add
sodium hydroxide and stirr well. Finally, add ethyl alcohol during
constant mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 10 or 1: 20

** 198 **
 CONCENTRATED
CAR AIR CONDITIONING DISINFECTANT
AND CLEANER
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 ALKYL POLYGLUCOSIDE 68515-73-1 2

2 ISOPROPYL ALCOHOL 67 – 63 – 0 20

3 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 5

4 BENZALKONIUM CHLORIDE ( % 50 ) 8001 – 54 -5 10

5 BENZALTRIAZOLE 1.2.3 ( INHIBITOR ) 95 – 14 - 7 0.200

6 DEINOIZED WATER 7732 – 18-5 62.800

TOTAL 100

PROCESS: Charge water in the process tank and add alkyl

polyglucoside. Start to mix. Dissolve alkyl polyglucoside in the water
completely. Add triethanolamine and benzaltriazole while mixing. Add
sodium hydroxide and stirr well. Finally, add isopropyl alcohol during
constant mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 15 or 1: 20

** 199 **
 CAR AIR CONDITIONING
DISINFECTANT AND CLEANER SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 GLUCOPON 215 ( TRADE NAME ) MIXTURE 0.100

2 ETHYL ALCOHOL 127 – 08-2 5

3 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 1

4 BENZALKONIUM CHLORIDE ( % 50 ) 8001 – 54 -5 3

5 BENZALTRIAZOLE 1.2.3 ( INHIBITOR ) 95 – 14 - 7 0.050

6 DEINOIZED WATER 7732 – 18-5 90.850

TOTAL 100

PROCESS: Charge water in the process tank and add glucopon. Start
to mix. Dissolve glucopon in the water completely. Add sodium
hydroxide and benzaltriazole while mixing. Add sodium hydroxide and
stirr well. Finally, add ethyl alcohol during constant mixing. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.
NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 200 **
 CAR AIR CONDITIONING
DISINFECTANT AND CLEANER SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 ALKYL POLYGLUCOSIDE 68515-73-1 0.150

2 ETHYL ALCOHOL 127 – 08-2 3

3 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 1

4 BENZALKONIUM CHLORIDE ( % 50 ) 8001 – 54 -5 3

5 BENZALTRIAZOLE 1.2.3 ( INHIBITOR ) 95 – 14 - 7 0.050

6 DEINOIZED WATER 7732 – 18-5 92.800

TOTAL 100

PROCESS: Charge water in the process tank and add alkyl

polyglucoside. Start to mix. Dissolve alkyl polyglucoside in the water
completely. Add sodium hydroxide and benzaltriazole while mixing. Add
sodium hydroxide and stirr well. Finally, add ethyl alcohol during
constant mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 201 **
 CAR AIR CONDITIONING
DISINFECTANT AND CLEANER SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 ALKYL POLYGLUCOSIDE 68515-73-1 0.150

2 ISOPROPYL ALCOHOL 67 – 63 – 0 3

3 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 3

4 BENZALKONIUM CHLORIDE ( % 50 ) 8001 – 54 -5 3

5 BENZALTRIAZOLE 1.2.3 ( INHIBITOR ) 95 – 14 - 7 0.050

6 DEINOIZED WATER 7732 – 18-5 90.800

TOTAL 100

PROCESS: Charge water in the process tank and add alkyl

polyglucoside. Start to mix. Dissolve alkyl polyglucoside in the water
completely. Add triethanolamine and benzaltriazole while mixing. Add
sodium hydroxide and stirr well. Finally, add isopropyl alcohol during
constant mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as spraying.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 202 **
 CAR AIR CONDITIONING
DISINFECTANT AND CLEANER FOAM
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 COCAMIDOPROPYL BETAINE MIXTURE 5

2 ETHYL ALCOHOL 127 – 08-2 3

3 SODIUM HYDROXIDE ( % 100 ) 1310 – 73-2 1

4 BENZALKONIUM CHLORIDE ( % 50 ) 8001 – 54 -5 3

5 BENZALTRIAZOLE 1.2.3 ( INHIBITOR ) 95 – 14 - 7 0.050

6 DEINOIZED WATER 7732 – 18-5 87.950

TOTAL 100

PROCESS: Charge water in the process tank and add

cocamidopropyl betaine. Start to mix. Dissolve cocamidopropyl betaine
in the water completely. Add sodium hydroxide and benzaltriazole while
mixing. Add sodium hydroxide and stirr well. Finally, add ethyl alcohol
during constant mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.
NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as foam.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 203 **
 CAR AIR CONDITIONING
DISINFECTANT AND CLEANER FOAM
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 COCAMIDOPROPYL BETAINE MIXTURE 4

2 METHYL ALCOHOL 67 – 56 – 1 3

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 3

4 BENZALKONIUM CHLORIDE ( % 50 ) 8001 – 54 -5 3

5 BENZALTRIAZOLE 1.2.3 ( INHIBITOR ) 95 – 14 - 7 0.050

6 DEINOIZED WATER 7732 – 18-5 86.950

TOTAL 100

PROCESS: Charge water in the process tank and add

cocamidopropyl betaine. Start to mix. Dissolve cocamidopropyl betaine
in the water completely. Add triethanolamine and benzaltriazole while
mixing. Add sodium hydroxide and stirr well. Finally, add ethyl alcohol
during constant mixing. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as foam.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 204 **
 CAR AIR CONDITIONING
DISINFECTANT AND CLEANER FOAM
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 COCAMIDOPROPYL BETAINE MIXTURE 4

2 ISOPROPYL ALCOHOL 67 – 63 – 0 3

3 TRIETHANOLAMINE ( TEA ) 102 – 71 – 6 4

4 BENZALKONIUM CHLORIDE ( % 50 ) 8001 – 54 -5 2

5 BENZALTRIAZOLE 1.2.3 ( INHIBITOR ) 95 – 14 - 7 0.050

6 DEINOIZED WATER 7732 – 18-5 86.950

TOTAL 100

PROCESS: Charge water in the process tank and add

cocamidopropyl betaine. Start to mix. Dissolve cocamidopropyl betaine
in the water completely. Add triethanolamine and benzaltriazole while
mixing. Add sodium hydroxide and stirr well. Finally, add isopropyl
alcohol during constant mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as foam.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 205 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

ANTI FOG

PRODUCT

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
ANTIFOG FLUID
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 12

2 NONYLPHENOL ETHOXYLATE 6 9016 – 45-9 1

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.5

4 SODIUM LAURYL ETHER SULFATE 68585-34-2 1

( SLES )

5 METHYL ALCOHOL 67 – 56 – 1 2

6 DEIONIZED WATER 7732 – 18-5 83.5

TOTAL 100

PROCESS: Charge silicone oil in the process tank and add

nonylphenol ethoxylate. Start to mix. Add triethanolamine and mix well.
Add sodium lauryl ether sulfate and methyl alcohol while constant
mixing. Finally, add water slowly. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 20 or 1: 25

** 206 **
 CONCENTRATED
ANTIFOG FLUID
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 15

2 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 1

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.5

4 COCAMIDE DEA 68603-42-9 0.5

5 METHYL ALCOHOL 67 – 56 – 1 1

6 DEIONIZED WATER 7732 – 18-5 82

TOTAL 100

PROCESS: Charge silicone oil in the process tank and add

nonylphenol ethoxylate. Start to mix. Add triethanolamine and mix well.
Add cocamide dea and methyl alcohol while constant mixing. Finally,
add water slowly. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 25 or 1: 30

** 207 **
 CONCENTRATED
ANTIFOG FLUID
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 18

2 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 1.8

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.5

4 COCAMIDE DEA 68603-42-9 0.5

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 2

6 DEIONIZED WATER 7732 – 18-5 77.200

TOTAL 100

PROCESS: Charge silicone oil in the process tank and add

nonylphenol ethoxylate. Start to mix. Add triethanolamine and mix well.
Add cocamide dea and isopropyl alcohol while constant mixing. Finally,
add water slowly. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 30 or 1: 35

** 208 **
 ANTIFOG SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 2

2 NONYLPHENOL ETHOXYLATE 6 9016 – 45-9 0.2

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.3

4 SODIUM LAURYL ETHER SULFATE 68585-34-2 0.2

( SLES )

5 METHYL ALCOHOL 67 – 56 – 1 0.8

6 DEIONIZED WATER 7732 – 18-5 97

TOTAL 100

PROCESS: Charge silicone oil in the process tank and add

nonylphenol ethoxylate. Start to mix. Add triethanolamine and mix well.
Add sodium lauryl ether sulfate and methyl alcohol while constant
mixing. Finally, add water slowly. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 209 **
 ANTIFOG SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 1.5

2 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 0.150

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.350

4 COCAMIDE DEA 68603-42-9 0.5

5 METHYL ALCOHOL 67 – 56 – 1 0.5

6 DEIONIZED WATER 7732 – 18-5 97

TOTAL 100

PROCESS: Charge silicone oil in the process tank and add

nonylphenol ethoxylate. Start to mix. Add triethanolamine and mix well.
Add cocamide dea and methyl alcohol while constant mixing. Finally,
add water slowly. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 210 **
 ANTIFOG SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 2.5

2 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 0.250

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.250

4 COCAMIDE DEA 68603-42-9 0.250

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 0.750

6 DEIONIZED WATER 7732 – 18-5 96

TOTAL 100

PROCESS: Charge silicone oil in the process tank and add

nonylphenol ethoxylate. Start to mix. Add triethanolamine and mix well.
Add cocamide dea and isopropyl alcohol while constant mixing. Finally,
add water slowly. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 211 **
 ANTIFOG GEL
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 3

2 NONYLPHENOL ETHOXYLATE 6 9016 – 45-9 0.300

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.200

4 SODIUM LAURYL ETHER SULFATE 68585-34-2 0.500

( SLES )

5 SILICONE OIL THICKENER ( SPECIAL ) MIXTURE 1

6 DEIONIZED WATER 7732 – 18-5 95

TOTAL 100

PROCESS: Charge silicone oil in the process tank and add

nonylphenol ethoxylate. Start to mix. Add triethanolamine and mix well.
Add sodium lauryl ether sulfate while constant mixing. Add water slowly.
Finally, add silicone oil thickener until gel and mix well. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is used to surface of misted glass

as rubbing completely. Then, cleaning with clean cloth.

** 212 **
 ANTIFOG GEL
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 2.5

2 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 0.250

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.150

4 COCAMIDE DEA 68603-42-9 0.350

5 SILICONE OIL THICKENER ( SPECIAL ) MIXTURE 1

6 DEIONIZED WATER 7732 – 18-5 95.750

TOTAL 100

PROCESS: Charge silicone oil in the process tank and add

nonylphenol ethoxylate. Start to mix. Add triethanolamine and mix well.
Add cocamide dea while constant mixing. Add water. Finally, add
silicone oil thickener until gel and mix well. Continue to stirr until mixture
is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is used to surface of misted glass

as rubbing completely. Then, cleaning with clean cloth.

** 213 **
 ANTIFOG GEL
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL MIXTURE 3.5

2 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 0.300

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.300

4 COCAMIDE DEA 68603-42-9 0.400

5 SILICONE OIL THICKENER MIXTURE 1

6 DEIONIZED WATER 7732 – 18-5 94.5

TOTAL 100

PROCESS: Charge silicone oil in the process tank and add

nonylphenol ethoxylate. Start to mix. Add triethanolamine and mix well.
Add cocamide dea while constant mixing. Add water slowly. Finally, add
silicone oil thickener until gel and mix well. Continue to stirr until mixture
is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is used to surface of misted glass

as rubbing completely. Then, cleaning with clean cloth.

** 214 **
 CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR

QUICK POLISH

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
CAR QUICK POLISH FLUID
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL EMULSION ( % 40 ) MIXTURE 25

2 ISOPROPYL ALCOHOL 67 – 63 – 0 15

3 DEIONIZED WATER 7732 – 18-5 60

TOTAL 100

PROCESS: Charge silicone oil emulsion in the process tank. Add

isopropyl alcohol. Start to mix. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 10 or 1: 15

** 215 **
 CONCENTRATED
CAR QUICK POLISH FLUID
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 CARNAUBA WAX EMULSION ( % 30 ) 8015-86 – 9 30

2 ISOPROPYL ALCOHOL 67 – 63 – 0 10

3 DEIONIZED WATER 7732 – 18-5 60

TOTAL 100

PROCESS: Charge carnauba wax emulsion in the process tank. Add

isopropyl alcohol. Start to mix. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 15 or 1: 20

** 216 **
 CONCENTRATED
CAR QUICK POLISH FLUID
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 CARNAUBA WAX EMULSION ( % 30 ) 8015-86 – 9 20

2 SILICONE OIL EMULSION ( % 40 ) 67 – 63 – 0 10

3 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 10

4 DEIONIZED WATER 7732 – 18-5 60

TOTAL 100

PROCESS: Charge carnauba wax emulsion and silicone oil emulsion

in the process tank. Add isopropyl alcohol. Start to mix. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 20 or 1: 25

** 217 **
 CAR
CAR QUICK POLISH SPRAY
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL EMULSION ( % 40 ) MIXTURE 5

2 ISOPROPYL ALCOHOL 67 – 63 – 0 5

3 DEIONIZED WATER 7732 – 18-5 90

TOTAL 100

PROCESS: Charge silicone oil emulsion in the process tank. Add

isopropyl alcohol. Start to mix. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 218 **
 CAR
QUICK POLISH SPRAY
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 CARNAUBA WAX EMULSION ( % 30 ) 8015-86 – 9 4

2 ISOPROPYL ALCOHOL 67 – 63 – 0 6

3 DEIONIZED WATER 7732 – 18-5 90

TOTAL 100

PROCESS: Charge carnauba wax emulsion in the process tank. Add

isopropyl alcohol. Start to mix. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 219 **
 CAR
CAR QUICK POLISH SPRAY
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 CARNAUBA WAX EMULSION ( % 30 ) 8015-86 – 9 3

2 SILICONE OIL EMULSION ( % 40 ) 67 – 63 – 0 3

3 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 4

4 DEIONIZED WATER 7732 – 18-5 90

TOTAL 100

PROCESS: Charge carnauba wax emulsion and silicone oil emulsion

in the process tank. Add isopropyl alcohol. Start to mix. Continue to stirr
until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

** 220 **
 CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

VEHICLE

COOLANT / ANTIFREEZE

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 85

2 SODIUM NITRITE ( CORROSION AGENT ) 7632 – 00-0 0.100

3 DEIONIZED WATER 7732 –18 –5 14.900

TOTAL 100

PROCESS: Charge water in the process tank. Add monoethylene

glycol. Start to mix. Add sodium nitrite while mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water depending on using weather condition. It is measured what to use
weather condition by device that measures freezing point of antifreeze
fluid.

** 221 **
 CONCENTRATED
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 70

2 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 20

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 1

4 DEIONIZED WATER 7732 – 18 -5 9

TOTAL 100

PROCESS: Charge water in the process tank. Add monoethylene

glycol. Start to mix. Add isopropyl alcohol during constant stirring. Add
triethanolamine while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water depending on using weather condition. It is measured what to use
weather condition by device that measures freezing point of antifreeze
fluid.

** 222 **
 CONCENTRATED
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 80

2 ETHYL ALCOHOL 64 – 17 – 5 10

3 SODIUM METASILICATE 13517-24-3 0.5

4 DEIONIZED WATER 7732 – 18 -5 9.5

TOTAL 100

PROCESS: Charge water in the process tank. Add monoethylene

glycol. Start to mix. Add ethyl alcohol during constant stirring. Add
sodium metasilicate while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water depending on using weather condition. It is measured what to use
weather condition by device that measures freezing point of antifreeze
fluid.

** 223 **
 CONCENTRATED
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 4

NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 50

2 ETHYL ALCOHOL 64 – 17 – 5 20

3 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 20

4 SODIUM NITRITE 7632 – 00-0 0.150

5 DEINOIZED WATER 7732 – 18-5 9.850

TOTAL 100

PROCESS: Charge water in the process tank. Add monoethylene

glycol. Start to mix. Add ethyl alcohol and isopropyl alcohol during
constant stirring. Add sodium nitrite while mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water depending on using weather condition. It is measured what to use
weather condition by device that measures freezing point of antifreeze
fluid.

** 224 **
 READY TO USE
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 40

2 SODIUM NITRITE ( CORROSION AGENT ) 7632 – 00-0 0.100

3 DEIONIZED WATER 7732 –18 –5 59.900

TOTAL 100

PROCESS: Charge water in the process tank. Add monoethylene

glycol. Start to mix. Add sodium nitrite while mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. It can withstand up

to – 30 or - 35 degrees.

** 225 **
 READY TO USE
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 20

2 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 20

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 1

4 DEIONIZED WATER 7732 – 18 -5 59

TOTAL 100

PROCESS: Charge water in the process tank. Add monoethylene

glycol. Start to mix. Add isopropyl alcohol during constant stirring. Add
triethanolamine while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. It can withstand up

to – 30 or - 35 degrees.

** 226 **
 READY TO USE
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 30

2 ETHYL ALCOHOL 64 – 17 – 5 10

3 SODIUM METASILICATE 13517-24-3 0.100

4 DEIONIZED WATER 7732 – 18 -5 59.900

TOTAL 100

PROCESS: Charge water in the process tank. Add monoethylene

glycol. Start to mix. Add ethyl alcohol during constant stirring. Add
sodium metasilicate while mixing. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. It can withstand up

to – 30 or - 35 degrees.

** 227 **
 READY TO USE
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 4

NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 20

2 ETHYL ALCOHOL 64 – 17 – 5 10

3 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 10

4 SODIUM NITRITE 7632 – 00-0 0.100

5 DEINOIZED WATER 7732 – 18-5 59.900

TOTAL 100

PROCESS: Charge water in the process tank. Add monoethylene

glycol. Start to mix. Add ethyl alcohol and isopropyl alcohol during
constant stirring. Add sodium nitrite while mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. It can withstand up

to – 30 or - 35 degrees.

** 228 **
 BORON BASED
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 1
( READY TO USE )
NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 37

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

3 BORIC ACID 10043-35-3 1

4 DEINOIZED WATER 7732 – 18-5 60

TOTAL 100

PROCESS: Charge boric acid and triethanolamine in the process

tank. Start to mix. Add water while mixing. Add monoethylene glycol and
mix well. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. It can withstand up

to – 30 or - 35 degrees. Boron ensures a longer life for antifreeze.

** 229 **
 BORON BASED
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 2
( READY TO USE )
NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 30

2 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 15

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 2

4 BORIC ACID 10043-35-3 1

5 DEIONIZED WATER 7732 –18 -5 52

TOTAL 100

PROCESS: Charge boric acid and triethanolamine in the process

tank. Start to mix. Add water while mixing. Add monoethylene glycol and
mix well. Add isopropyl alcohol during mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. It can withstand up

to – 30 or - 35 degrees. Boron ensures a longer life for antifreeze.

** 230 **
 BORON BASED
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 3
( READY TO USE )
NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 28

2 ETHYL ALCOHOL 64 – 17 – 5 15

3 TRIETHANOLAMINE ( TEA ) 102 – 71- 6 2

4 BORIC ACID 10043-35-3 1

5 DEINOIZED WATER 7732 – 18-5 54

TOTAL 100

PROCESS: Charge boric acid and triethanolamine in the process

tank. Start to mix. Add water while mixing. Add monoethylene glycol and
mix well. Add ethyl alcohol while constant stirring. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. It can withstand up

to – 30 or - 35 degrees. Boron ensures a longer life for antifreeze.

** 231 **
 BORON BASED
VEHICLE COOLANT /ANTIFREEZE
PRODUCTION PROCESS – 4
( READY TO USE )
NO CAS W/W
INGREDIENTS NUMBER
1 MONOETHYLENE GLYCOL ( MEG ) 107 – 21 - 1 25

2 ETHYL ALCOHOL 64 – 17 – 5 10

3 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 8

4 TRIETHANOLAMINE ( TEA ) 102 – 71- 6 2

5 BORIC ACID 10043-35-3 1

6 DEINOIZED WATER 7732 – 18-5 54

TOTAL 100

PROCESS: Charge boric acid and triethanolamine in the process

tank. Start to mix. Add water while mixing. Add monoethylene glycol and
mix well. Add ethyl alcohol and isopropyl alcohol while mixing. Continue
to stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. It can withstand up

to – 30 or - 35 degrees. Boron ensures a longer life for antifreeze.

** 232 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

CAR

WINDSHIELD

WASHER FLUID

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 1
( USING FOR SUMMER )
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585 -34-2 5
( SLES )

2 SODIUM HYDROXIDE ( % 100 ) 1310 –73 - 2 5

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 DEIONIZED WATER 7732 – 18-5 89.5

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

sodium lauryl ether sulfate. Dissolve sodium lauryl ether sulfate in the
water completely. Add sodium metasilicate and sodium hydroxide during
constant stirring. Finally, add food dye to color mixture in the tank.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 10 – 1: 15. Generally, this product is used in the summer.

** 233 **
 CONCENTRATED
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 2
( USING FOR SUMMER )
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 3

2 SODIUM HYDROXIDE ( % 100 ) 1310 –73 - 2 5

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 DEIONIZED WATER 7732 – 18-5 91.5

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

nonylphenol ethoxylate. Dissolve nonylphenol ethoxylate in the water
completely. Add sodium metasilicate and sodium hydroxide during
constant stirring. Finally, add food dye to color mixture in the tank.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 8 – 1: 10. Generally, this product is used in the summer.

** 234 **
 CONCENTRATED
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 3
( USING FOR SUMMER )
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 5

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 5

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 DEIONIZED WATER 7732 – 18-5 89.5

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

nonylphenol ethoxylate. Dissolve nonylphenol ethoxylate in the water
completely. Add sodium metasilicate and triethanolamine during
constant stirring. Finally, add food dye to color mixture in the tank.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 10 – 1: 15. Generally, this product is used in the summer.

** 235 **
 READY TO USE
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 1
( USING FOR SUMMER )
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585 -34-2 0.5
( SLES )

2 SODIUM HYDROXIDE ( % 100 ) 1310 –73 - 2 2

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 DEIONIZED WATER 7732 – 18-5 97

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

sodium lauryl ether sulfate. Dissolve sodium lauryl ether sulfate in the
water completely. Add sodium metasilicate and sodium hydroxide during
constant stirring. Finally, add food dye to color mixture in the tank.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Generally, this

product is used in the summer.

** 236 **
 READY TO USE
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 2
( USING FOR SUMMER )
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 1

2 SODIUM HYDROXIDE ( % 100 ) 1310 –73 - 2 2.5

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 DEIONIZED WATER 7732 – 18-5 96

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

nonylphenol ethoxylate. Dissolve nonylphenol ethoxylate in the water
completely. Add sodium metasilicate and sodium hydroxide during
constant stirring. Finally, add food dye to color mixture in the tank.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Generally, this

product is used in the summer.

** 237 **
 READY TO USE
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 3
( USING FOR SUMMER )
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 1

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 3

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 DEIONIZED WATER 7732 – 18-5 95.500

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

nonylphenol ethoxylate. Dissolve nonylphenol ethoxylate in the water
completely. Add sodium metasilicate and triethanolamine during
constant stirring. Finally, add food dye to color mixture in the tank.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Generally, this

product is used in the summer.

** 238 **
 READY TO USE
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 1
( USING MILD WEATHER IN WINTER )
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585 -34-2 0.5
( SLES )

2 SODIUM HYDROXIDE ( % 100 ) 1310 –73 - 2 2

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 30

6 DEIONIZED WATER 7732 – 18-5 67

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

sodium lauryl ether sulfate. Dissolve sodium lauryl ether sulfate in the
water completely. Add sodium metasilicate and sodium hydroxide during
constant stirring. Add isopropyl alcohol and mix well. Finally, add food
dye to color mixture in the tank. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Generally, this

product is used in mild weather in the winter.

** 239 **
 READY TO USE
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 2
( USING MILD WEATHER IN WINTER )
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 1

2 SODIUM HYDROXIDE ( % 100 ) 1310 –73 - 2 2.5

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 20

6 DEIONIZED WATER 7732 – 18-5 76

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

nonylphenol ethoxylate. Dissolve nonylphenol ethoxylate in the water
completely. Add sodium metasilicate and sodium hydroxide during
constant stirring. Add isopropyl alcohol while mixing. Finally, add food
dye to color mixture in the tank. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Generally, this

product is used in mild weather in the winter.

** 240 **
 READY TO USE
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 3
( USING MILD WEATHER IN WINTER )
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 1

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 3

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 25

6 DEIONIZED WATER 7732 –18 –5 70.5

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

nonylphenol ethoxylate. Dissolve nonylphenol ethoxylate in the water
completely. Add sodium metasilicate and triethanolamine during
constant stirring. Add isopropyl alcohol during mixing. Finally, add food
dye to color mixture in the tank. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Generally, this

product is used in mild weather in the winter.

** 241 **
 READY TO USE
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 1
( USING COLD WEATHER IN WINTER )
NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM LAURYL ETHER SULFATE 68585 -34-2 0.5
( SLES )

2 SODIUM HYDROXIDE ( % 100 ) 1310 –73 - 2 2

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 60

6 DEIONIZED WATER 7732 – 18-5 37

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

sodium lauryl ether sulfate. Dissolve sodium lauryl ether sulfate in the
water completely. Add sodium metasilicate and sodium hydroxide during
constant stirring. Add isopropyl alcohol and mix well. Finally, add food
dye to color mixture in the tank. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Generally, this

product is used in cold weather in the winter.

** 242 **
 READY TO USE
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 2
( USING COLD WEATHER IN WINTER )
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 1

2 SODIUM HYDROXIDE ( % 100 ) 1310 –73 - 2 2.5

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 70

6 DEIONIZED WATER 7732 – 18-5 26

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

nonylphenol ethoxylate. Dissolve nonylphenol ethoxylate in the water
completely. Add sodium metasilicate and sodium hydroxide during
constant stirring. Add isopropyl alcohol while mixing. Finally, add food
dye to color mixture in the tank. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Generally, this

product is used in cold weather in the winter.

** 243 **
 READY TO USE
CAR WINDSHIELD WASHER FLUID
PRODUCTION PROCESS – 3
( USING COLD WEATHER IN WINTER )
NO CAS W/W
INGREDIENTS NUMBER
1 NONYLPHENOL ETHOXYLATE 10 9016 – 45-9 1

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 3

3 SODIUM METASILICATE 13517-24-3 0.450

4 FOOD DYES ( ANY COLOR ) MIXTURE 0.050

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 55

6 DEIONIZED WATER 7732 –18 –5 40.5

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

nonylphenol ethoxylate. Dissolve nonylphenol ethoxylate in the water
completely. Add sodium metasilicate and triethanolamine during
constant stirring. Add isopropyl alcohol during mixing. Finally, add food
dye to color mixture in the tank. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Generally, this

product is used in cold weather in the winter.

** 244 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

RADIATOR

FLUSH

AND

CLEANER

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
RADIATOR FLUSH AND CLEANER FLUID
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 C13 – 15 OXO ALCOHOL 85566 –16-1 10

2 TETRASODIUM EDTA 64 – 02 – 8 5

3 SODIUM NITRITE 7632 – 00-0 0.250

4 TRIETHANOLAMINE ( TEA ) 102 – 71-6 5

5 DEIONIZED WATER 7732 – 18-5 79.750

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add oxo
alcohol. Dissolve oxo alcohol in the water completely. Add sodium nitrite
and tetrasodium edta while constant mixing. Add triethanolamine and
mix well. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 10 – 1: 15.

** 245 **
 CONCENTRATED
RADIATOR FLUSH AND CLEANER FLUID
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 GLUCOPON 215 ( TRADE NAME ) MIXTURE 10

2 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 10

3 SODIUM NITRITE 7632 – 00-0 0.250

4 SODIUM METASILICATE 13517-24-3 1

5 DEIONIZED WATER 7732 – 18-5 78.750

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

glucopon. Dissolve glucopon in the water completely. Add sodium nitrite
and potassium tripolyphosphate while constant mixing. Add sodium
metasilicate and mix well. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 15 – 1: 20.

** 246 **
 CONCENTRATED
RADIATOR FLUSH AND CLEANER FLUID
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 CAPRYL GLUCOSIDE 68515-73-1 12

2 SODIUM TRIPOLYPHOSPHATE ( STTP ) 7758-29-4 2

3 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 2

4 SODIUM METASILICATE 13517-24-3 1

5 DEIONIZED WATER 7732 – 18-5 83

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add capryl
glucoside. Dissolve capryl glucoside in the water completely. Add
sodium sodium hydroxide and sodium tripolyphosphate while constant
mixing. Add sodium metasilicate and mix well. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 15 – 1: 20.

** 247 **
 RADIATOR
FLUSH AND CLEANER FLUID
PRODUCTION PROCESS – 1
( READY TO USE )
NO CAS W/W
INGREDIENTS NUMBER
1 C13 – 15 OXO ALCOHOL 85566 –16-1 2

2 TETRASODIUM EDTA 64 – 02 – 8 3

3 SODIUM NITRITE 7632 – 00-0 0.250

4 TRIETHANOLAMINE ( TEA ) 102 – 71-6 3

5 DEIONIZED WATER 7732 – 18-5 91.750

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add oxo
alcohol. Dissolve oxo alcohol in the water completely. Add sodium nitrite
and tetrasodium edta while constant mixing. Add triethanolamine and
mix well. Continue to stirr until mixture is homogenous. Homogenous is
enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Then, it is used

directly to clean inside or outside of radiator.

** 248 **
 RADIATOR
FLUSH AND CLEANER FLUID
PRODUCTION PROCESS – 2
( READY TO USE )
NO CAS W/W
INGREDIENTS NUMBER
1 GLUCOPON 215 ( TRADE NAME ) MIXTURE 3

2 POTASSIUM TRIPOLYPHOSPHATE 13845-36-8 3

3 SODIUM NITRITE 7632 – 00-0 0.250

4 SODIUM METASILICATE 13517-24-3 1

5 DEIONIZED WATER 7732 – 18-5 92.750

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

glucopon. Dissolve glucopon in the water completely. Add sodium nitrite
and potassium tripolyphosphate while constant mixing. Add sodium
metasilicate and mix well. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Then, it is used

directly to clean inside or outside of radiator.

** 249 **
 RADIATOR
FLUSH AND CLEANER FLUID
PRODUCTION PROCESS – 3
( READY TO USE )
NO CAS W/W
INGREDIENTS NUMBER
1 CAPRYL GLUCOSIDE 68515-73-1 2

2 SODIUM TRIPOLYPHOSPHATE ( STTP ) 7758-29-4 2

3 SODIUM HYDROXIDE ( % 100 ) 1310-73-2 2

4 SODIUM METASILICATE 13517-24-3 2

5 DEIONIZED WATER 7732 – 18-5 92

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add capryl
glucoside. Dissolve capryl glucoside in the water completely. Add
sodium sodium hydroxide and sodium tripolyphosphate while constant
mixing. Add sodium metasilicate and mix well. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to use. Then, it is used

directly to clean inside or outside of radiator.

** 250 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

RADIATOR

CORROSION

INHIBITOR

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
RADIATOR CORROSION INHIBITOR
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM NITRITE 7632 – 00-0 5

2 TETRASODIUM EDTA 64 – 02 – 8 5

3 TRIETHANOLAMINE ( TEA ) 102 – 71-6 5

4 DEINOIZED WATER 7732 – 18-5 85

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

remainder of ingredients during constant stirring. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 20 – 1: 30.

** 251 **
 CONCENTRATED
RADIATOR CORROSION INHIBITOR
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM NITRITE 7632 – 00-0 8

2 SODIUM TRIPOLYPHOSPHATE ( STTP ) 7758 – 29-4 2

3 SODIUM METASILICATE 13517-24-3 2

4 DEINOIZED WATER 7732 – 18-5 88

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

remainder of ingredients during constant stirring. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 20 – 1: 30.

** 252 **
 CONCENTRATED
RADIATOR CORROSION INHIBITOR
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SODIUM NITRITE 7632 – 00-0 8

2 SODIUM TRIPOLYPHOSPHATE ( STTP ) 7758 – 29-4 2

3 DEIONIZED WATER 7732 – 18-5 90

TOTAL 100

PROCESS: Charge water in the process tank. Start to mix. Add

sodium tripolyphosphate during constant stirring. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is concentrated and diluted with

water as 1: 20 – 1: 30.

** 253 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

ADBLUE

UREA

SOLUTION

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 ADBLUE
UREA SOLUTION
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 UREA ( % 46 NITROGEN ) 57 – 13 – 6 32.5

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.5

3 DEIONIZED WATER 7732 – 18 -5 67

TOTAL 100

PROCESS: Charge water and urea in the process tank. Start to mix.
Add triethanolamine and mix well. Continue to stirr until mixture is
homogenous. Homogenous is enough. Process is completed.

NOTE: Reduces Nitrous Oxide in diesel vehicles. For vehicles using a

Selective Catalytic Reduction (SCR) system

USE: The above formulated product is ready to use.

** 254 **
 ADBLUE
UREA SOLUTION
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 UREA ( % 46 NITROGEN ) 57 – 13 – 6 33

2 TRIETHANOLAMINE ( TEA ) 102 – 71-6 0.5

3 SODIUM METASILICATE 13517-24-3 0.5

4 DEINOIZED WATER 7732 – 18-5 66

TOTAL 100

PROCESS: Charge water and urea in the process tank. Start to mix.
Add triethanolamine and sodium metasilicate while stirring. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Reduces Nitrous Oxide in diesel vehicles. For vehicles using a

Selective Catalytic Reduction (SCR) system

USE: The above formulated product is ready to use.

** 255 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

WINDSHIELD

RAIN

REPELLENT

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 CONCENTRATED
WINDSHIELD RAIN REPELLENT FLUID
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL 4000 MIXTURE 10

2 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 4

( 13 / 8 ) ( NONIONIC )

3 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 1.5

( 13 / 3 ) ( NONIONIC )

4 ACETIC ACID 64 – 19 – 7 1

5 PEG 400 ( POLYETHYLENE GLYCOL ) 25322-68-3 5

6 DEIONIZED WATER 7732 – 18-5 78.5

TOTAL 100

PROCESS: Charge water in the process tank and heat 50 C. Start to

mix. Add isotridecyl alcohol ethoxylates and mix. Dissolve isotridecyl
alcohol ethoxylate. Add silicone oil while constant mixing. Add acetic
acid to adjust Ph: 5,5. Add peg 400 during mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is concentrated and mixed with

isopropyl alcohol as 1: 5 – 1: 10.

USE: It is applied to the windscreen. It waited for about 5 - 10 minutes.

Then wipe with a clean cloth.

** 256 **
 CONCENTRATED
WINDSHIELD RAIN REPELLENT FLUID
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL 4000 MIXTURE 12

2 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 4

( 13 / 8 ) ( NONIONIC )

3 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 2

( 13 / 3 ) ( NONIONIC )

4 ACETIC ACID 64 – 19 – 7 1

5 GLYCERINE 56 – 81 – 5 7

6 DEIONIZED WATER 7732 – 18-5 74

TOTAL 100

PROCESS: Charge water in the process tank and heat 50 C. Start to

mix. Add isotridecyl alcohol ethoxylates and mix. Dissolve isotridecyl
alcohol ethoxylate. Add silicone oil while constant mixing. Add acetic
acid to adjust Ph: 5,5. Add glycerine during mixing. Continue to stirr until
mixture is homogenous. Homogenous is enough. Process is completed.

NOTE: The above formulated product is concentrated and mixed with

isopropyl alcohol as 1: 7 – 1: 15.

USE: It is applied to the windscreen. It waited for about 5 - 10 minutes.

Then wipe with a clean cloth.

** 257 **
 CONCENTRATED
WINDSHIELD RAIN REPELLENT FLUID
PRODUCTION PROCESS – 3

NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL 4000 MIXTURE 15

2 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 4

( 13 / 8 ) ( NONIONIC )

3 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 2

( 13 / 3 ) ( NONIONIC )

4 ACETIC ACID 64 – 19 – 7 1

5 GLYCERINE 56 – 81 – 5 3

5 PEG 400 ( POLYETHYLENE GLYCOL ) 25322-68-3 5

6 DEIOINIZED WATER 7732 –18 –5 69

TOTAL 100

PROCESS: Charge water in the process tank and heat 50 C. Start to

mix. Add isotridecyl alcohol ethoxylates and mix. Dissolve isotridecyl
alcohol ethoxylate. Add silicone oil while constant mixing. Add acetic
acid to adjust Ph: 5,5. Add glycerine and peg 400 during mixing.
Continue to stirr until mixture is homogenous. Homogenous is enough.
Process is completed.

NOTE: The above formulated product is concentrated and mixed with

isopropyl alcohol as 1: 10 – 1: 20.

USE: It is applied to the windscreen. It waited for about 5 - 10 minutes.

Then wipe with a clean cloth.

** 258 **
 CAR WINDSHIELD
RAIN REPELLENT SPRAY
PRODUCTION PROCESS – 1
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL 4000 MIXTURE 2.5

2 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 0.750

( 13 / 8 ) ( NONIONIC )

3 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 0.250

( 13 / 3 ) ( NONIONIC )

4 ACETIC ACID 64 – 19 – 7 0.250

5 PEG 400 ( POLYETHYLENE GLYCOL ) 25322-68-3 1.250

5 ISOPROPYL ALCOHOL 67 – 63 0 50

6 DEIONOIZED WATER 7732 – 18-5 45

TOTAL 100
PROCESS: Charge water in the process tank and heat 50 C. Start to
mix. Add isotridecyl alcohol ethoxylates and mix. Dissolve isotridecyl
alcohol ethoxylate. Add silicone oil while constant mixing. Add acetic acid
to adjust Ph: 5,5. Add peg 400 during mixing. Finally, add isopropyl
alcohol and mix well. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

USE: It is applied to the windscreen. It waited for about 5 - 10 minutes.

Then wipe with a clean cloth.

** 259 **
 CAR WINDSHIELD
RAIN REPELLENT SPRAY
PRODUCTION PROCESS – 2
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL 4000 MIXTURE 1.5

2 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 0.250

( 13 / 8 ) ( NONIONIC )

3 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 0.250

( 13 / 3 ) ( NONIONIC )

4 ACETIC ACID 64 – 19 – 7 0.250

5 GLYCERINE 56 – 81 – 5 3

5 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 50

6 DEIONIZED WATER 7732 –18 - 5 44.750

TOTAL 100
PROCESS: Charge water in the process tank and heat 50 C. Start to
mix. Add isotridecyl alcohol ethoxylates and mix. Dissolve isotridecyl
alcohol ethoxylate. Add silicone oil while constant mixing. Add acetic acid
to adjust Ph: 5,5. Add glycerine during mixing. Finally, add isopropyl
alcohol and mix well. Continue to stirr until mixture is homogenous.
Homogenous is enough. Process is completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous as foam.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

USE: It is applied to the windscreen. It waited for about 5 - 10 minutes.

Then wipe with a clean cloth.

** 260 **
 CAR WINDSHIELD
RAIN REPELLENT SPRAY
PRODUCTION PROCESS – 3
NO CAS W/W
INGREDIENTS NUMBER
1 SILICONE OIL 4000 MIXTURE 2

2 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 0.500

( 13 / 8 ) ( NONIONIC )

3 ISOTRIDECYL ALCOHOL ETHOXYLATE MIXTURE 0.250

( 13 / 3 ) ( NONIONIC )

4 ACETIC ACID 64 – 19 – 7 0.500

5 GLYCERINE 56 – 81 – 5 2

5 PEG 400 ( POLYETHYLENE GLYCOL ) 25322-68-3 2

6 ISOPROPYL ALCOHOL ( IPA ) 67 – 63 – 0 50

7 DEIONIZED WATER 7732 – 18-5 42.750

TOTAL 100
PROCESS: Charge water in the process tank and heat 50 C. Start to
mix. Add isotridecyl alcohol ethoxylates and mix. Dissolve isotridecyl
alcohol ethoxylate. Add silicone oil while constant mixing. Add acetic acid
to adjust Ph: 5,5. Add glycerine and peg 400 during mixing. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: The above formulated product is filled to bottle spray and used
non – gaseous.

NOTE: For production of 500 ml aerosol spray is used 430 g above

product and 60 – 70 g LPG gaseous ( Propellant )

USE: It is applied to the windscreen. It waited for about 5 - 10 minutes.

Then wipe with a clean cloth.

** 261 **
CAR CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

FUEL

ENJECTOR

CLEANER

PRODUCTIONS

SOLVERCHEM PUBLICATIONS
 FUEL
ENJECTOR CLEANER FLUID
PRODUCTION PROCESS – 1

NO CAS W/W
INGREDIENTS NUMBER
1 KERSOSENE MIXTURE 60

2 WHITE SPIRIT MIXTURE 40

TOTAL 100

PROCESS: Charge kersosene and White spirit in the process tank.

Start to mix. Continue to stirr until mixture is homogenous. Homogenous
is enough. Process is completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to us for cleaning enjector.

** 262 **
 FUEL
ENJECTOR CLEANER FLUID
PRODUCTION PROCESS – 2

NO CAS W/W
INGREDIENTS NUMBER
1 POLYETHERAMINE ( PEA ) MIXTURE 50

2 ISOOCTANOL MIXTURE 10

3 ALIPHATIC NAPHTHA MIXTURE 20

TOTAL 100

PROCESS: Charge polyether amine in the process tank. Start to mix.

Add isooctanıl and aliphatic naphtha during constant mixing. Continue to
stirr until mixture is homogenous. Homogenous is enough. Process is
completed.

NOTE: Amount of ingredients used above formulation can be changed

depending condition of market.

USE: The above formulated product is ready to us for cleaning enjector.

** 263 **
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOME
INGREDIENTS

USED
IN
AUTO CARE

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

A
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 ACETYLATED
LANOLIN

GENERAL
DEFINITIONS
CAS 629 – 70 – 9 + 61788 – 49 – 6
NUMBER
GENERAL Cosmetic agent
CATEGORY
FACTORIAL Skin softening
CATEGORY
TRADE Acetylated lanolin
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH 150
POINT ( C )
PH 6–9
RANGE
BOILING 650
POINT ( C )
DENSITY 0.880 g / cm3
SOLUBILITY Soluble in hot water and cold water.
264
 ACETYLATED
LANOLIN

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid oily
COLOR Yellow
ODOR A characteristic odor
AID It does not cause an irritation more. In
MEASURES contact, wash plenty of water.
STORAGE
Keep cool and dry place

Observed that quite often used in the

APPLICATIONS manufacture of cosmetic products. Among
these products, hair care products, skin care
creams and lotions, we can include the baby
products.
 ACNIBIO
AC

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Cosmetic and detergent agent
CATEGORY
FACTORIAL Biodegradable preservative
CATEGORY
TRADE Acnibio AC
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FREEZING Not specified

POINT ( C )
PH 2–4
RANGE
MELTING Not specified
POINT ( C )
DENSITY 1.10 g / cm3
SOLUBILITY Soluble in hot water and cold water.
266
 ACNIBIO
AC

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid viscous
COLOR Colorless and pale yellow
ODOR Odorless
AID It does not cause an irritation on contact. In
MEASURES contact, wash plenty of water.
STORAGE
Keep cool and dry place

ACNIBIO AC is suitable for all cosmetics and

toiletries (conditioners, gels, shampoos,
surfactants, cleansers…).

ACNIBIO AC is supplied as an aqueous

APPLICATIONS solution for ease of incorporation into
cosmetic formulations. It has good
compatibility with surfactants and emulsifiers,
irrespective of their ionic nature. In hot
processes it is advisable to add the
preservative during the cooling stage at a
temperature no greater than 60ºC, and
preferably below 40ºC.
 ACNIBIO
AP

GENERAL
DEFINITIONS
CAS NUMBER Mixture
GENERAL Cosmetic and detergent agent
CATEGORY
FACTORIAL Biodegradable preservative
CATEGORY
TRADE NAME Acnibio AP

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FREEZING Not specified

POINT ( C )
PH 3.5 – 5,5
RANGE
MELTING Not specified
POINT ( C )
DENSITY 1.150 g / cm3
SOLUBILITY Soluble in glycol. Slightly soluble in water and
alcohol.
268
 ACNIBIO
AP

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless and pale yellow
ODOR Odorless
AID It does not cause an irritation on contact. In
MEASURES contact, wash plenty of water.
STORAGE
Keep cool and dry place
ACNIBIO AP is an effective and powerful biocide
suitable for a wide range of hydro-alcohol, w/o or o/w
emulsion based cosmetics.

The product may be applied at different pH ranges,

from 3,0 up to 8,0. The advised dosage for these
applications goes from 0.25 to 1,0 %. The higher
concentrations are generally required only for
APPLICATIONS formulations which, by their nature, are particularly
difficult to preserve. Shampoos and foam baths may
be preserved with ACNIBIO AP at concentrations
typically between 0.25 - 0.65%. Products with a high
protein content may require levels from 0,5% - 1,0%.
Emulsified systems, both o/w and w/o types, may be
effectively preserved by the addition of ACNIBIO AP
at 0.4 - 0.7%.
ACNIBIO AP can also be used to preserve
emulsions based on nonionic surfactants, but slightly
increased concentrations may be required,
 ALKYL
POLYGLUCOSIDE

GENERAL
DEFINITIONS
CAS 68515 – 73 – 1
NUMBER
GENERAL Surfactants for detergent
CATEGORY
FACTORIAL Nonionic
CATEGORY
TRADE Nonionic
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FREEZING 10
POINT ( C )
PH 6–9
RANGE
MELTING Not specified
POINT ( C )
DENSITY 1.150 g / cm3
SOLUBILITY Soluble in hot water and cold water.
270
 ALKYL
POLYGLUCOSIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid viscous
COLOR Colorless
ODOR Odorless
AID It does not cause an irritation on contact. In
MEASURES contact, wash plenty of water.
STORAGE
Keep cool and dry place

Alkyl polyglycosides, and is a raw material

in the form of a colorless liquid with a
odorless.
APPLICATIONS

Alkyl polyglucosides, with ionic properties

are actively resistant surface is highly alkaline
environment. Including detergents and
cosmetics products, find use in many
industrial cleaning products.
 AMARANTH
E123

GENERAL
DEFINITIONS
CAS 915 – 67 – 3
NUMBER
GENERAL Anionic dye
CATEGORY
FACTORIAL Food dye
CATEGORY
TRADE Amaranth E123
NAME

CHEMICAL
PROPERTIES
CHEMICAL C20H11N2Na3O10S3
FORMULA
MOLECULAR 604.47 gr / mole
WEIGHT

ACTIVE 85
(%)
PH 6–8
RANGE
MELTING Not specified
POINT ( C )
DENSITY 0.800 g / cm3
SOLUBILITY Soluble in hot water and cold water.
272
 AMARANTH
E123

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR Dark red or brown
ODOR Odorless
AID It does not cause an irritation on contact. In
MEASURES contact, wash plenty of water.
STORAGE
Keep cool and dry place

Reddish brow powder. Slightly soluble in

water for product red, soluble in 30% ethanol,
glycerin and thin syrup, slightly soluble in
ethanol and soluble fiber element, insoluble in
APPLICATIONS other organic solvents.

The strong sulfuric acid for purple, diluted for

pink; In nitric acid solution for colourful red; In
the red brown solution for hydrochloric acid, a
black precipitation; In the thick of sodium
hydroxide solution for red brown.
 AMINO TRİMETHYLENE
PHOSPHORIC ACID ( ATMP )

GENERAL
DEFINITIONS
CAS 6419 – 19 - 8
NUMBER
GENERAL Industrıal agent
CATEGORY
FACTORIAL Chelated agent
CATEGORY
TRADE ATMP
NAME

CHEMICAL
PROPERTIES
CHEMICAL C3H12NO9P3
FORMULA
MOLECULAR 299.05 gr / mole
WEIGHT

BOILING Not specified

POINT ( C )
PH 2
RANGE
MELTING 200
POINT ( C )
DENSITY 1.33 g / cm3
SOLUBILITY 610 Gr / Lt Soluble in water.
274
 AMINO TRİMETHYLENE
PHOSPHORIC ACID ( ATMP )

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or granul
COLOR White
ODOR A characteristic odor.
AID It causes an irritation on contact. In contact,
MEASURES wash plenty of water.
STORAGE
Keep cool and dry place

ATMP system in hard water and is a stable

material which can be hydrolyzed. In high
concentrations, ATMP has good corrosion
inhibition. ATMP cold water system and
oilfield in industrial thermal power plant and
APPLICATIONS oil refinery plants used in circulation in the
area of water pipeline.

ATMP is a major effect on corrosion of metal

equipment and pipeline. Chelating agents for
the textile and dyeing industry as ATMP is
available and can be utilized as metal surface
treatment agent.
 AMMONIUM HYDROXIDE
AQUEOUS AMMONIA

GENERAL
DEFINITIONS
CAS 7664 – 41 – 7 + 7732 – 18 – 5
NUMBER
GENERAL Industrıal agent
CATEGORY
FACTORIAL Alkaline agent
CATEGORY
TRADE Aqueous ammonia
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

BOILING Not specified

POINT ( C )
PH 11 - 12
RANGE
MELTING -69.2
POINT ( C )
DENSITY 0.989 g / cm3
SOLUBILITY Soluble in water easily.
276
 AMMONIUM HYDROXIDE
AQUEOUS AMMONIA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless
ODOR A characteristic ammonia odor.
AID It causes an irritation on contact. In contact,
MEASURES wash plenty of water.
STORAGE
Keep cool and dry place

Ammonium hydroxide. is used as a

cleaning agent and sanitizer in many
household and industrial cleaners.
APPLICATIONS Ammonium hydroxide is also used in the
manufacture of products such as fertilizer,
plastic, rayon and rubber.

Aqueous ammonia is corrosive to aluminum

alloys, copper, copper alloys, and galvanized
surfaces. Aqueous ammonia is an excellent
acid neutralizer.
 AMMONIUM
BICARBONATE

GENERAL
DEFINITIONS
CAS 1066 – 33 – 7
NUMBER
GENERAL Industrıal agent
CATEGORY
FACTORIAL Industrial and detergent productions
CATEGORY
TRADE Ammonium bicarbonate
NAME

CHEMICAL
PROPERTIES
CHEMICAL NH4HCO3
FORMULA
MOLECULAR 79.06 Gr / Mole
WEIGHT

BOILING Not specified

POINT ( C )
PH 7
RANGE
MELTING 107
POINT ( C )
DENSITY 1.590 g / cm3
SOLUBILITY Soluble in water easily.
278
 AMMONIUM
BICARBONATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes no irritation on contact. In contact,
MEASURES wash plenty of water.
STORAGE
Keep cool and dry place

Ammonium bicarbonate, bakery in ( yeast

duty), baking powder formulations, in fire
extinguishers, conductive plastics, cleaning
products, ceramics, paint, leather and
APPLICATIONS fertilizer used in the textile industry.

Ammonium bicarbonate, shelf life of the

product obtained when using ammonium
bicarbonate, baking soda is short. It is used
for alkalization of cocoa powder and firing to
form carbon dioxide.
 AMMONIUM
CHLORIDE

GENERAL
DEFINITIONS
CAS 12125 – 02 – 9
NUMBER
GENERAL Industrıal agent
CATEGORY
FACTORIAL Deoxidising for metal
CATEGORY
TRADE Ammonium Chloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL NH4CL
FORMULA
MOLECULAR 53.49 Gr / Mole
WEIGHT

BOILING 520
POINT ( C )
PH 5.5
RANGE
MELTING 338
POINT ( C )
DENSITY 1.530 g / cm3
SOLUBILITY Soluble in water easily.
280
 AMMONIUM
CHLORIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal or powder
COLOR White
ODOR A characteristic odor
AID It causes an irritation on contact. In contact,
MEASURES wash plenty of water.
STORAGE
Keep cool and dry place

Ammonium chloride colorless crystalline

substance easily dissolves in water to form a
liquid slightly acidic property. Evaporating
from the melt 340 ° C, to form ammonia and
hydrogen chloride in equal volumes.

APPLICATIONS Ammonium chloride, in the production of dry

batteries and some explosives, In Galvanized
sector, tin plating, as flux raw materials in
your hot-dip galvanized, If used as a
surfactant ALS shampoo in cosmetics if the
construction industry, in the production of
cleaner used to thicken Ammonium Chloride
and some shampoo, Some noble metals
(such as gold) in the refining / purification,
Some synthetic adhesives, drying, etc.
 AMMONIUM
LAURYL ETHER SULFATE

GENERAL
DEFINITIONS
CAS 32612 – 48 – 9
NUMBER
GENERAL Surfactant
CATEGORY
FACTORIAL Anionic
CATEGORY
TRADE ALES
NAME

CHEMICAL
PROPERTIES
CHEMICAL MIXTURE
FORMULA
MOLECULAR Mixture
WEIGHT

BOILING 100
POINT ( C )
PH 5–7
RANGE
FLASH 93.7
POINT ( C )
DENSITY 0.986 g / cm3
SOLUBILITY Soluble in cold water and hot water.
282
 AMMONIUM
LAURYL ETHER SULFATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Creamy liquid
COLOR White or colorless
ODOR A characteristic odor
AID It causes no irritation on contact. In contact,
MEASURES wash plenty of water.
STORAGE
Keep cool and dry place

Ammonium lauryl ether sulphate, an

anionic surface active ingredient, creamy or
concentrated liquid form and has a
characteristic odor.
APPLICATIONS

Ammonium lauryl ether sulphate can

therefore have a lower irritation than other
anionic surfactants raw materials, usually in
child care products, in cosmetic products and
is used in the detergent industry.
 AMMONIUM
LAURYL SULFATE ( % 28 )

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Surfactant
CATEGORY
FACTORIAL Anionic
CATEGORY
TRADE Ammonium lauryl sulphate ( % 28 )
NAME

CHEMICAL
PROPERTIES
CHEMICAL MIXTURE
FORMULA
MOLECULAR Mixture
WEIGHT

BOILING 100
POINT ( C )
PH 5-7
RANGE
FLASH Not specified
POINT ( C )
DENSITY 1.010 g / cm3
SOLUBILITY Soluble in cold water and hot water.
284
 AMMONIUM
LAURYL SULFATE ( % 28 )

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless and pale yellow
ODOR A characteristic odor
AID It causes no irritation on contact. In contact,
MEASURES wash plenty of water.
STORAGE
Keep cool and dry place

APPLICATIONS Ammonium lauryl sulfate, diğer yüzey aktif

maddelere göre daha az irritasyona sahiptir.
Bu nedenle genellikle çocuk bakım
ürünlerinde ve kozmetik ürünlerinde kullanılır.
 ACETIC
ACID

GENERAL
DEFINITIONS
CAS 64 – 19 - 7
NUMBER
GENERAL Food and industrial ingredient
CATEGORY
FACTORIAL Acidic regular
CATEGORY
TRADE E 260
NAME

CHEMICAL
PROPERTIES
CHEMICAL C2H4O2
FORMULA
MOLECULAR 60.05 Gr / Mole
WEIGHT

BOILING 118
POINT ( C )
PH 2
RANGE
MELTING 16.5
POINT ( C )
DENSITY 1.265 g / cm3
SOLUBILITY Soluble in cold water and hot water.
286
 ACETIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless
ODOR A characteristic odor
AID It causes an irritation on contact. In contact,
MEASURES wash plenty of water.
STORAGE
Keep cool and dry place

Vinegar is a household essential often used

for cooking, and it even helps unclog sinks.
What chemical substance makes vinegar
smell the way it does? Vinegar is actually a
solution that is made of 4-8% of acetic acid
APPLICATIONS that is dissolved in water and other
substances that give vinegar its flavor
depending on its type.

Acetic acid, also known as ethanoic

acid and methanecarboxylic acid, is a
colorless liquid that has a strong and distinct
pungent and sour smell. Its chemical
formula is C2H4O2: it has two carbon (C)
atoms, four hydrogen (H) atoms and two
oxygen (O) atoms.
 ACETONE

GENERAL
DEFINITIONS
CAS 67 – 64 - 1
NUMBER
GENERAL industrial ingredient
CATEGORY
FACTORIAL Solvent agent
CATEGORY
TRADE Acetone
NAME

CHEMICAL
PROPERTIES
CHEMICAL C3H6O
FORMULA
MOLECULAR 58.08 Gr / Mole
WEIGHT

BOILING 56.2
POINT ( C )
PH Not specified
RANGE
MELTING -95
POINT ( C )
DENSITY 0.790 g / cm3
SOLUBILITY Soluble in cold water.
288
 ACETONE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless
ODOR A characteristic odor
AID It causes an irritation on contact. In contact,
MEASURES wash plenty of water.
STORAGE
Keep cool and dry place

Acetone is a colorless, flammable liquid that

evaporates easily. It is an organic compound
because carbon atoms are present in
acetone's chemical formula, which is C3H6O.
It consists of three carbon atoms, six
APPLICATIONS hydrogen atoms, and one oxygen atom.

Acetone is a solvent, which is a liquid that can

dissolve other substances. Acetone is most
commonly known as the solvent that removes
nail polish, but it is also found in bath and
fragrance products, hair and skin care
products, as well as skin-lightening products.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

B
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 BARITE

GENERAL
DEFINITIONS
CAS Mineral
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Filler agent
CATEGORY
TRADE Barite
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mineral
FORMULA
MOLECULAR Mineral
WEIGHT

HARDNESS 2.5 – 3,5

( MOHS )
MELTING 1580
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 4.20 g / cm3
SOLUBILITY Insoluble in water.
290
 BARITE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or granular
COLOR Gray or white
ODOR Odorless
AID It does not cause an irritation more. In
MEASURES contact, wash plenty of water.
STORAGE
Keep cool and dry place

Barite is the main one of element barium. It is

also important in the manufacture of paper
and rubber. Barite is also used in radiology
for x-rays of the digestive system. When
APPLICATIONS crushed, it is added to mud to form barium
mud, which is poured into oil wells during
drilling. A rich, white pigment was once made
from crushed Barite.

Barite is also a very popular and common

mineral among collectors.
 BEESWAX

GENERAL
DEFINITIONS
CAS 8012 – 89 – 3
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Wax agent
CATEGORY
TRADE Beeswax
NAME

CHEMICAL
PROPERTIES
CHEMICAL Natural wax
FORMULA
MOLECULAR Natural wax
WEIGHT

FLASH Not specified

POINT ( C )
MELTING 63.5
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 0.955 g / cm3
SOLUBILITY Insoluble in water.
292
 BEESWAX

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Solid,paste and oily
COLOR Pale yellow
ODOR A characteristic odor.
AID It does not cause an irritation more. In
MEASURES contact, wash plenty of water.
STORAGE
Keep cool and dry place

Beeswax (Beeswax), in waterproof materials,

furniture and floor polish, the polishing of
optical lenses, although little is found in
chewing gum and ink usage.
APPLICATIONS

Yellow wax polishing parquet, sculpture, used

in some paints and candle making.
Beeswax, a variety of body care creams in
cosmetics, face masks, lotions, lipsticks, lip
balms and oils and used in production.
 BENZALDEHYDE

GENERAL
DEFINITIONS
CAS 100 – 52 – 7
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Aniline dye agent
CATEGORY
TRADE Benzaldehyde
NAME

CHEMICAL
PROPERTIES
CHEMICAL C7H6O
FORMULA
MOLECULAR 106.13 g / mole
WEIGHT

FLASH 65
POINT ( C )
MELTING -26.5
POINT ( C )
BOILING 179
POINT ( C )
DENSITY 1.05 g / cm3
SOLUBILITY Slightly soluble in water.
294
 BENZALDEHYDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless
ODOR A characteristic odor.
AID It causes an irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Benzaldehyde is a color liquid aldehyde with

an almond odor. Benzaldehyde is found in
many foods and is widely used in the
chemical industry. In the chemical industry,
this agent is used in the preparation of
various aniline dyes, perfumes, flavorings,
APPLICATIONS and pharmaceuticals. In
addition, benzaldehyde has been associated
with amygdalin, since one of amygdalins
breakdown products is benzaldehyde. (NCI)

Flash point near 145 °F. More denser than

water and insoluble in water. Hence sinks in
water. Easily penetrates the soil to
contaminate groundwater and nearby
waterways. Used in flavoring and perfume
making.
 BENZALKONIUM
CHLORIDE

GENERAL
DEFINITIONS
CAS 8001 – 54 – 5
NUMBER
GENERAL Detergent ingredient
CATEGORY
FACTORIAL Disinfectant agent
CATEGORY
TRADE Benzalkonium chloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH Not specified

POINT ( C )
MELTING 140
POINT ( C )
BOILING 100
POINT ( C )
DENSITY 1.010 g / cm3
SOLUBILITY Soluble in water.
296
 BENZALKONIUM
CHLORIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless
ODOR A characteristic odor.
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Benzalkonium chloride, itself has a peculiar

odor, liquid form, is transparent and colorless
APPLICATIONS raw material.

Benzalkonium chloride, detergent industry

and in particular disinfectant products,
industrial products and disinfectants in
particular surgical tools, disinfectant used in
swimming pools and many other related
products.
 BENZYL
ALCOHOL

GENERAL
DEFINITIONS
CAS NUMBER 100 – 51 – 6
GENERAL Industrial ingredient
CATEGORY
FACTORIAL General solvent
CATEGORY
TRADE NAME Benzyl alcohol

CHEMICAL
PROPERTIES
CHEMICAL C7H8O
FORMULA
MOLECULAR 108.14 g / Mole
WEIGHT

FLASH Not specified

POINT ( C )
MELTING 15
POINT ( C )
BOILING 205
POINT ( C )
DENSITY 1.045 g / cm3
SOLUBILITY Slightly soluble in water. Soluble in ether and
chloroform.
298
 BENZYL
ALCOHOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless
ODOR Sweet odor.
AID It causes an irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Benzyl alcohol, inks, paints, lacquers, and is

used as a general solvent for epoxy resin
coatings. Also it esters used soap, perfume,
flavor, and is a precursor for a variety of
industries. This generally bacteriostatic and
intravenous drug solution is added as a
APPLICATIONS preservative, depending on the antipruritic
properties. Also it used as a photo developer.

Benzyl alcohol, quartz wool fibers and has

almost the same refractive index. If a clear
quartz object is immersed in benzyl alcohol, it
is almost invisible. This is an object (see
crystal skull) is made of quartz or right is used
as a way to recognize as destructive.
 BENZOTRIAZOLE

GENERAL
DEFINITIONS
CAS 95 – 14 – 7
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Metal inhibitor
CATEGORY
TRADE Benzotriazole
NAME

CHEMICAL
PROPERTIES
CHEMICAL C6H5N3
FORMULA
MOLECULAR 119.12 g / Mole
WEIGHT

FLASH Not specified

POINT ( C )
MELTING 100
POINT ( C )
BOILING 350
POINT ( C )
DENSITY 1.360 g / cm3
SOLUBILITY Partially, soluble in water.
300
 BENZOTRIAZOLE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes an irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Benzotriazole, no smell, the white color is a

APPLICATIONS solid raw crystal or powder form.

Benzotriazole, usually in the metal processing

industry and chemical and oil taken up in
acidic work used as the metal inhibitor.
 BIS PEG 1
DIMETHICONE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Cosmetic ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Bis peg 1 dimethicone
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH Not specified

POINT ( C )
MELTING Not specified
POINT ( C )
BOILING 200
POINT ( C )
DENSITY Not specified
SOLUBILITY Soluble in water.
302
 BIS PEG 1
DIMETHICONE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Colorless
ODOR A characteristic odor.
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

BIS-PEG-1 DIMETHICONE is classified as

surfactant skin conditioning plasticiser hair
APPLICATIONS conditioning.

Often used in the production of cosmetics.

Protect hair shampoo and hair care products
and hair styling used in lotions and creams. It
also has to provide softness to the hair and
foam also supportive.
 BIS PEG 20
DIMETHICONE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Cosmetic ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Bis peg 20 dimethicone
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH Not specified

POINT ( C )
MELTING Not specified
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY Not specified
SOLUBILITY Soluble in water.
304
 BIS PEG 20
DIMETHICONE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Colorless
ODOR A characteristic odor.
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

BIS PEG 20 DIMETHICONE is classified as

surfactant skin conditioning plasticiser hair
conditioning.
APPLICATIONS

Often used in the production of cosmetics.

Protect hair shampoo and hair care products
and hair styling used in lotions and creams. It
also has to provide softness to the hair and
foam also supportive.
 BORAX

GENERAL
DEFINITIONS
CAS 1303 – 96 – 4
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Detergent
CATEGORY
TRADE Borax
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mineral
FORMULA
MOLECULAR Mineral
WEIGHT

PH 9 – 9.5
RANGE
MELTING 743
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 1.73 g / cm3
SOLUBILITY Partially, soluble in water.
306
 BORAX

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Borax is used in the process of making boric

acid, but there is a tremendous chemical
difference between the two. Borax is a
naturally occurring mineral, though of course,
APPLICATIONS that doesn’t make it inert or safe either.
Arsenic is a naturally occurring metalloid but it
isn’t safe for human use. Natural doesn’t
always mean safe.

At the same time, the studies used to back up

the safety (or danger) of borax often use boric
acid or are ambiguous about which was used.
 BORIC
ACID

GENERAL
DEFINITIONS
CAS 10043 – 35 – 3
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Inorganic acid
CATEGORY
TRADE Boric acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL H3PO3
FORMULA
MOLECULAR 61.83
WEIGHT

PH Not specified
RANGE
MELTING 171
POINT ( C )
BOILING 300
POINT ( C )
DENSITY 1.435 g / cm3
SOLUBILITY Partially, soluble in water.
308
 BORIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Boric acid is a solid raw material that does not

smell white and crystalline form.

APPLICATIONS
Boric acid, diethanolamine or
monoethanolamine in this compound used in
the construction of anti-corrosion products in
the detergents sector. Boric acid is also found
in use in the cosmetic and pharmaceutical
industries. Also located on site due to the
boron is also used in agriculture.
 BUTYLENE
GLYCOL

GENERAL
DEFINITIONS
CAS 111 – 76 – 2
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Solvent
CATEGORY
TRADE Butylene glycol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C6H14O2
FORMULA
MOLECULAR 118.17 g / Mole
WEIGHT

FLASH 65
POINT ( C )
MELTING -77
POINT ( C )
BOILING 171
POINT ( C )
DENSITY 0.900 g / cm3
SOLUBILITY Soluble in water.
310
 BUTYLENE
GLYCOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless
ODOR A characteristic odor.
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Butylene glycol is an organic solvent. Also it

has a very good solvent and dirt rust remover
feature. Tozut to be used on surfaces where
anti-surface drying regulatory and anti-feature
APPLICATIONS is also available. Quick-drying lacquer and
find use in the manufacture of varnishes.

Butylene glycol, detergents and industrial

degreasing cleaning products used as soil
removal. In hydraulic oil, truffles used as a
solvent in the oil and surface cleaner.
 BUTYL HYDROXY TOLUENE
BHT

GENERAL
DEFINITIONS
CAS 128 – 37 – 0
NUMBER
GENERAL Food ingredient
CATEGORY
FACTORIAL Antioxidant
CATEGORY
TRADE Butyl hydroxy tolüene ( BHT )
NAME

CHEMICAL
PROPERTIES
CHEMICAL C15H24O
FORMULA
MOLECULAR 220.36 g / Mole
WEIGHT

E 321
CODE
MELTING 70
POINT ( C )
BOILING 265
POINT ( C )
DENSITY 1.05 g / cm3
SOLUBILITY Insoluble in water. Soluble in oil.
312
 BUTYL HYDROXY TOLUENE
BHT

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

This material, despite having lower activity in

vegetable oils such as BHA, are used in the
food protection feature has been added fat
when used in combination with other
antioxidants. BHA; It showed synergistic
effect with BHT can not synergize with
APPLICATIONS gallate.
Synthetic antioxidants BHA and BHT entering
class; widely used food additives is
excessively dissolved in the fat, while
insoluble in water. BHA and BHT; solid, liquid
containing fats and oils slowing the rancidity
of foods; various cereals, chewing gum, the
products that use plant-derived oils such as
potato chips, color can be commonly arises
from exposure to air these products, flavor or
texture prevents the change.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

C
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 CALCITE
MINERAL

GENERAL
DEFINITIONS
CAS Mineral
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Filler agent
CATEGORY
TRADE Calcite
NAME

CHEMICAL
PROPERTIES
CHEMICAL CaCO3
FORMULA
MOLECULAR 100.1
WEIGHT

PH 8–9
RANGE
MELTING 825
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 2.700 g / cm3
SOLUBILITY Insoluble in water.
314
 CALCITE
MINERAL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR white
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Calcite, including chemical structure first,

APPLICATIONS insulation mortar, paint production,
polyurethane structures, used in detergents
and in many industrial areas.

Calcite, plastic and rubber manufacturing out

of them is used as a filler.
 CALCIUM
HYDROXIDE

GENERAL
DEFINITIONS
CAS 1305 – 62 – 5
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL slaked lime
CATEGORY
TRADE Calcium hydroxide
NAME

CHEMICAL
PROPERTIES
CHEMICAL Ca(OH)2
FORMULA
MOLECULAR 74.1
WEIGHT

PH 14
RANGE
MELTING 580
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 2.200 g / cm3
SOLUBILITY Slightly soluble in water.
316
 CALCIUM
HYDROXIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR white
ODOR Odorless
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Calcium hydroxide, calcium hypochlorite and

to obtain industry finds its use in many areas.

APPLICATIONS Among these sectors, the production of

calcium silicate and calcium silicate bricks
made accordingly, are used in the production
of gas concrete and mortar construction.
It is also used as the main raw material in the
production of calcium-based grease in grease
production.
 CALCIUM HYPOCHLORIDE
POWDER CHLORINE

GENERAL
DEFINITIONS
CAS 7778 – 54 – 3
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL chlorine bleach and disinfectant agent
CATEGORY
TRADE Calcium hypochloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL CaCI2O2
FORMULA
MOLECULAR 143
WEIGHT

PH 10 - 11
RANGE
MELTING 100
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 2.350 g / cm3
SOLUBILITY Slightly soluble in water.
318
 CALCIUM HYPOCHLORIDE
POWDER CHLORINE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or crystal
COLOR White or gray
ODOR A characteristic chlorine odor.
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Chlorine powder, within the available chlorine

and chlorine odor judge this reason, it is a
solid raw white and crystalline form.
APPLICATIONS
Chlorine powder, detergent primarily due to
receive property and especially chlorine
bleach active in the production, pool
chemicals, water treatment, paper industry,
textile and many other industrial areas is used
as chlorine bleach.
 CALCIUM CHLORIDE

GENERAL
DEFINITIONS
CAS 10043 – 52 – 4
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Hygroscopic agent
CATEGORY
TRADE Calcium chloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL CaCI2
FORMULA
MOLECULAR 110.99
WEIGHT

PH 9
RANGE
MELTING 772
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 2.150 g / cm3
SOLUBILITY Soluble in water.
320
 CALCIUM CHLORIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
Calcium chloride, is generally used as the
electrolyte and salt; sports drinks and other
beverages can be found in calcium chloride.
Canned products preserve the structure of
vegetables; pickles and similar products
without increasing the sodium content of
foods, salty taste to give used for
APPLICATIONS confectionery products can be found in the
calcium chloride.Cheese production is added
to processed milk, to protect the natural
balance between calcium and protein,
calcium chloride can be used. Also; if the milk
is of poor quality for cheese making, the clot
becomes soft, which in addition to causing
heavy losses to casein and fat loss, causes
poor clotting; a fixed clotting time and the
addition is made in order to obtain sufficient
calcium chloride in clot firmness.
 CALCIUM
SILICATE

GENERAL
DEFINITIONS
CAS 1344 – 95 - 2
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Insulation agent
CATEGORY
TRADE Calcium silicate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Ca2SiO3
FORMULA
MOLECULAR 116.16
WEIGHT

PH Not specified
RANGE
MELTING 1540
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY Not specified
SOLUBILITY Insoluble in water.
322
 CALCIUM
SILICATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Calcium silicate, as well as use in different

industrial sector, in the food industry and, in
APPLICATIONS particular, the dough baking soda in the
production, as additives in table salt
manufacturing and inhibiting agglomeration of
the vanilla powder, spice mixes and in many
food powder form production are used as
additives anti-caking.
 CALCIUM
SULFATE

GENERAL
DEFINITIONS
CAS 7778 – 18 – 9
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL coagulant agent
CATEGORY
TRADE Calcium sulfate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Ca2SO4
FORMULA
MOLECULAR 136.14
WEIGHT

PH Not specified
RANGE
MELTING 1450
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 2.960 g / cm3
SOLUBILITY Partially soluble in water.
324
 CALCIUM
SULFATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Calcium sulfate dihydrate, known E 516 food

code, CaSO4 chemical formula and 136.14 g
/ mole with a molecular weight of white (which
can be in different colors) and odorless raw
APPLICATIONS material is a powder or crystal form.

Calcium sulfate anhydrate, stabilizers, metal

binding agent is used as a nutrient for the
yeast bread. Also in the pharmaceutical
sector and particularly finds use in the
cosmetic and pharmaceutical industry.
 CAPRYLYL CAPRYL
GLUCOSIDE

GENERAL
DEFINITIONS
CAS 68515 – 73 – 1 + 7732 – 18 – 5
NUMBER
GENERAL Detergent and cosmetic ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Caprylyl capryl glucoside
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

PH 11 – 12
RANGE
MELTING 0
POINT ( C )
BOILING 100
POINT ( C )
DENSITY 1.15 g / cm3
SOLUBILITY Soluble in water.
326
 CAPRYLYL CAPRYL
GLUCOSIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Yellowish
ODOR Odorless
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Caprylyl capryl glucoside is a naturally, and

vegetable based surfactant derived from corn
and natural oils. It is an excellent choice for
use in household, industrial and institutional
cleansers.
APPLICATIONS
Caprylyl capryl glucoside is not only highly
compatible with alkaline builders (including
NaOH), it will also exhibit hydrotropic
properties in such systems where
conventional nonionic and anionic surfactants
have limited compatibility and solubility.
Additionally, surfactants of this class have
been found to be non-streaking and not leave
a film on hard surfaces.
 CARRAGEENAN
GLUCOSIDE

GENERAL
DEFINITIONS
CAS 9000 – 07 - 1
NUMBER
GENERAL Cosmetic and food ingredient
CATEGORY
FACTORIAL Thickener
CATEGORY
TRADE Carrageenan
NAME

CHEMICAL
PROPERTIES
CHEMICAL Polymer
FORMULA
MOLECULAR Polymer
WEIGHT

PH Not specified
RANGE
MELTING Not specified
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY Not specified
SOLUBILITY Insoluble in water. Dispersible in water.
328
 CARRAGEENAN

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR Yellowish or white – off
ODOR Odorless
AID It causes no irritation . In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Carrageenan is a good thickening agent.

Therefore, consistency has the possibility of
use in some cosmetic and detergent products
wanted.
Carrageenan, which aim to ensure that the
APPLICATIONS milk pudding with cocoa particles suspended
in the milk chocolate production and is used
as a gelling agent in an aqueous gel. Also, ice
making separation of the water and
preventing the formation of large ice crystals
is used as an inhibitor of discoloration in the
colored cream.

Purpose of use, ensure that the shelf stability

of the product and to prepare canned sweet
gel products are stored without cooling.
 CARBOXYMETHYL CELLULOSE
CMC

GENERAL
DEFINITIONS
CAS 9004 – 32 – 4
NUMBER
GENERAL Cosmetic and food ingredient
CATEGORY
FACTORIAL Thickener
CATEGORY
TRADE Carboxymethyl cellulose ( CMC )
NAME

CHEMICAL
PROPERTIES
CHEMICAL Polymer
FORMULA
MOLECULAR Polymer
WEIGHT

PH Not specified
RANGE
MELTING Not specified
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY Not specified
SOLUBILITY Partially soluble in water. Dispersible in water.
330
 CARBOXYMETHYL CELLULOSE
CMC

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR Yellowish or white – off
ODOR Odorless
AID It causes no irritation . In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
Carboxymethyl cellulose, CMC Na - CMC,
are of commercial importance and produced
a stabilized particle form. Easy to dissolve in
water and is a hydrocolloid used for multiple
purposes because of the Beam feature.
Some can be used to thicken cosmetics and
detergent products.
APPLICATIONS
It is also used in washing powder and
detergent cleaning fluid mechanics.
Ice cream, sorbet and frozen konfeksiyoner
inhibitor of the formation of ice crystals in the
product; cream, jelly and pudding in
preventing the sineresis event; cakes and
other bakery products increased volume of
water the provider and protector; dietetic
foods and are used as emulsifier and
stabilizer in the beverage industry.
 CARMOISINE

GENERAL
DEFINITIONS
CAS 3567 – 69 – 9
NUMBER
GENERAL Food ingredient
CATEGORY
FOOD E 122
E CODE
TRADE Carmoisine
NAME

CHEMICAL
PROPERTIES
CHEMICAL C20H12N2Na2O7S2
FORMULA
MOLECULAR 502.44
WEIGHT

PH 6–8
RANGE
MELTING 300
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 0.800 g / cm3
SOLUBILITY Soluble in water.
332
 CARMOISINE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR Red
ODOR Odorless
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place
Synthetic food dyes in food coloring product
Carmoisine allowed in food codex, which are
used in limited quantities in the classroom. Ice
cream production, icy drinks, necessary in
sodas, fruit soda is used in production.
Also in the production of confectionery
products, jellies, flavored drinks, chewing gum
APPLICATIONS varieties in sugar and low-sugar, bakery
products, confectionery etc. It is used in many
food production.
Food except pharmaceuticals, cosmetics,
detergent products, car care products, in a
small amount of agricultural products,
cleaning products, colored stones, play
dough, etc. are also used for coloring in
contact with people of many products.
Carmoisine gives red color and is soluble in
water.
 CARNAUBA
WAX

GENERAL
DEFINITIONS
CAS 8015 – 86 – 9
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Wax
CATEGORY
TRADE Carnauba wax
NAME

CHEMICAL
PROPERTIES
CHEMICAL Wax
FORMULA
MOLECULAR Wax
WEIGHT

PH Not specified
RANGE
MELTING 84
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 0.995 g / cm3
SOLUBILITY Insoluble in water. Soluble in ethyl ether.
334
 CARNAUBA
WAX

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Waxy solid
COLOR Yellow or green
ODOR A characteristic odor.
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Carnauba wax is a vegetable-based oil

derivatives. Sometimes found in yellow or
green.
APPLICATIONS Mainly including cosmetic, food, used as
emulsion detergent and car care products in
particular. Moreover, in manufacturing of
cosmetic products, particularly lipstick,
mascara, stick, and hair wax it is highly
desirable in production. Apart from these, the
skin care products and lotions used.
 CETEARETH
11

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Surfactant
CATEGORY
FACTORIAL Emulsifier
CATEGORY
TRADE Ceteareth 11
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH 193.3
POINT ( C )
MELTING 55
POINT ( C )
BOILING 204.4
POINT ( C )
DENSITY 0.995 g / cm3
SOLUBILITY Dispersible in water
336
 CETEARETH
11

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR White
ODOR Mild waxy
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

CETEARETH 11, density 0.995 g / cm 3

which, white and viscous liquid is a raw
material form.

APPLICATIONS CETEARETH 11 is generally used in the

cosmetic industry and sometimes
endüstrieyel products and detergent sectors.

CETEARETH 11 production and particularly

in cosmetics, skin care lotions and creams in
hot processes in hair creams, hair care
products as an emulsifier.
 CETEARETH
20

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Surfactant
CATEGORY
FACTORIAL Emulsifier
CATEGORY
TRADE Ceteareth 20
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH 193.3
POINT ( C )
MELTING 55
POINT ( C )
BOILING 204.4
POINT ( C )
DENSITY 1.015 g / cm3
SOLUBILITY Dispersible in water
338
 CETEARETH
20

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR White
ODOR Mild waxy
AID It causes no irritation more. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

CETEARETH 20, density 1.015 g / cm 3

which, white and viscous liquid is a raw
material form.
APPLICATIONS CETEARETH 20 is generally used in the
cosmetic industry and sometimes
endüstrieyel products and detergent sectors.

CETEARETH 20 production and particularly

in cosmetics, skin care lotions and creams in
hot processes in hair creams, hair care
products as an emulsifier.
 CETRIMONIUM
CHLORIDE

GENERAL
DEFINITIONS
CAS 112 – 2 – 7
NUMBER
GENERAL Surfactant
CATEGORY
FACTORIAL Cationic
CATEGORY
TRADE Cetrimonium chloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL C19H42NCl
FORMULA
MOLECULAR 320 g / mole
WEIGHT

FLASH Not specified

POINT ( C )
PH 6–7
RANGE
BOILING Not specified
POINT ( C )
DENSITY 1.070 g / cm3
SOLUBILITY Soluble in water
340
 CETRIMONIUM
CHLORIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and yellow
ODOR A characteristic odor.
AID It causes an irritation little. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Cetrimonium chloride, which slightly

APPLICATIONS viscous and liquid raw materials are often
dominated by a cationic isopropyl alcohol
smell.

Cetrimonium chloride, is pretty much a raw

material used in cosmetics. often used as an
emulsifier in their hair cream and skin care
cream.
 CHOCOLATE BROWN
HT

GENERAL
DEFINITIONS
CAS 4553 – 89 – 3
NUMBER
GENERAL Food ingredient
CATEGORY
FOOD E 155
E CODE
TRADE Chocolate Brown HT
NAME

CHEMICAL
PROPERTIES
CHEMICAL C27H18N4Na2O9S2
FORMULA
MOLECULAR 652.99 g / mole
WEIGHT

FLASH Not specified

POINT ( C )
PH 4–6
RANGE
BOILING Not specified
POINT ( C )
DENSITY 0.70 g / cm3
SOLUBILITY Soluble in water
342
 CHOCOLATE BROWN
HT

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR Red and brown
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Chocolate Brown HT, paint with synthetic

food dyes in food allowed in class products
are used in limited quantities codex. Ice
cream, iced drinks, candies, jellies, flavored
drinks, chewing gum, baked goods,
confectionery etc. are used in many food
APPLICATIONS production.

Food except pharmaceuticals, cosmetics,

cleaning products, colored stones, play
dough, etc. are also used for coloring in
contact with people of many products

Chocolate Brown HT, give a brown color and

is soluble in water.
 CINNAMYL
ALCOHOL

GENERAL
DEFINITIONS
CAS 104 – 54 – 1
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Organic alcohol
CATEGORY
TRADE Cinnamyl alcohol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C9H10O
FORMULA
MOLECULAR 134.17 g / mole
WEIGHT

FLASH Not specified

POINT ( C )
MELTING 33
POINT ( C )
BOILING 250
POINT ( C )
DENSITY 1.04 g / cm3
SOLUBILITY Slightly soluble in water. Soluble in alcohol.
344
 CINNAMYL
ALCOHOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR Sweet Odor.
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Cinnamyl alcohol is valuable in perfumery for

its odor and fixative properties. It is a
component of many flower compositions
APPLICATIONS (lilac, hyacinth, and lily of the valley) and is a
starting material for cinnamyl esters, several
of which are valuable fragrance materials.

In aromas, the alcohol is used forcinnamon

notes and for rounding off fruit
aromas. Cinnamon spice, floral, green and
fermented with powdery balsamic nuances.
Use in trace amounts.
 CLIMBAZOLE

GENERAL
DEFINITIONS
CAS 38083 – 17 – 9
NUMBER
GENERAL cosmetic ingredient
CATEGORY
FACTORIAL Hair products production
CATEGORY
TRADE Climbazole
NAME

CHEMICAL
PROPERTIES
CHEMICAL C15H17CIN2O2
FORMULA
MOLECULAR 292.17 g / mole
WEIGHT

FLASH Not specified

POINT ( C )
MELTING 94
POINT ( C )
BOILING Not specified
POINT ( C )
DENSITY 1.320 g / cm3
SOLUBILITY Slightly soluble in water.
346
 CLIMBAZOLE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Climbazole, density 1.320 g / cm3, which, in

APPLICATIONS crystalline form, colorless or close to white, is
a solid raw material.

Climbazole is generally a raw material

commonly used in cosmetics. Especially hair
care products, used extensively in shampoos
for dandruff.
 COCAMIDOPROPYL
BETAINE

GENERAL
DEFINITIONS
CAS 61789 – 40 – 0 + 7647 – 14 – 5
NUMBER
GENERAL Cosmetic and detergent ingredient
CATEGORY
FACTORIAL surfactant
CATEGORY
TRADE Cocamidopropyl betaine
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

PH 5–7
RANGE
MELTING 17
POINT ( C )
BOILING 100
POINT ( C )
DENSITY 1.010 g / cm3
SOLUBILITY Soluble in water.
348
 COCAMIDOPROPYL
BETAINE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic odor slightly.
AID It causes an irritation slightly. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Betaine, intensive light and peculiar odor with

a light, transparent and colorless liquid raw
APPLICATIONS material is an active amphoteric surfactants.

Betaine, as surface cleaning and particularly

active in the cosmetics and detergents sector
used in foaming shampoo and baby products.
An extremely low irritation surfactant.
 COCAMIDE
DEA

GENERAL
DEFINITIONS
CAS 68603 – 42 – 9 + 111 – 42 – 2
NUMBER
GENERAL Cosmetic and detergent ingredient
CATEGORY
FACTORIAL surfactant
CATEGORY
TRADE Cocamide DEA
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

PH 9 – 10
RANGE
FLASHING 94
POINT ( C )
BOILING 100
POINT ( C )
DENSITY 0.950 g / cm3
SOLUBILITY Soluble in water.
350
 COCAMIDE
DEA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and light yellow
ODOR A characteristic oily odor slightly.
AID It causes an irritation slightly. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Cocamide DEA, idiosyncratic form of a dense

liquid surfactant is a nonionic character is a
smell of moving raw materials.
APPLICATIONS
Cocamide DEA, it is a surface active
materials. It gives support to the main raw
material in a mixture of surfactants. Thickener
and foaming agent is very stable because of
properties. Major fields of cosmetics and
detergents are output. It also finds use in
industrial cleaning facility area.
 COCAMIDE
MEA

GENERAL
DEFINITIONS
CAS 68603 – 42 – 9 + 141 – 43 – 5
NUMBER
GENERAL Cosmetic and detergent ingredient
CATEGORY
FACTORIAL surfactant
CATEGORY
TRADE Cocamide MEA
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

PH 9 – 10
RANGE
FLASHING 94
POINT ( C )
BOILING 100
POINT ( C )
DENSITY 0.950 g / cm3
SOLUBILITY Soluble in water.
352
 COCAMIDE
MEA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and light yellow
ODOR A characteristic oily odor slightly.
AID It causes an irritation slightly. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Cocamide MEA, idiosyncratic form of a dense

liquid surfactant is a nonionic character is a
smell of moving raw materials.
APPLICATIONS
Cocamide MEA, it is a surface active
materials. It gives support to the main raw
material in a mixture of surfactants. Thickener
and foaming agent is very stable because of
properties. Major fields of cosmetics and
detergents are output. It also finds use in
industrial cleaning facility area.
 CYCLOMETHICONE

GENERAL
DEFINITIONS
CAS 541 – 02 – 6
NUMBER
GENERAL cosmetic ingredient
CATEGORY
FACTORIAL Silicone active
CATEGORY
TRADE Siloxane
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH Not specified

POINT ( C )
MELTING -44
POINT ( C )
BOILING 211
POINT ( C )
DENSITY 0.950 g / cm3
SOLUBILITY Slightly soluble in water.
354
 CYCLOMETHICONE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless and clear
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Cyclomethicone, a density of 0.950 g / cm 3

with the liquid form of colorless raw material.
APPLICATIONS Cyclomethicone, the generally is a raw
material commonly used in cosmetics.
Especially hair care products, used
extensively in shampoos for dandruff. It is
also one of main raw materials in the
production of hair serum. It also helps the
pigment dispersion for some products.
 CYCLOPENTASILOXANE

GENERAL
DEFINITIONS
CAS 541 – 02 – 6
NUMBER
GENERAL cosmetic ingredient
CATEGORY
FACTORIAL Silicone active
CATEGORY
TRADE Cyclopentasiloxane
NAME

CHEMICAL
PROPERTIES
CHEMICAL C10H30O5Si5
FORMULA
MOLECULAR Not specified
WEIGHT

FLASH Not specified

POINT ( C )
MELTING -44
POINT ( C )
BOILING 211
POINT ( C )
DENSITY 0.950 g / cm3
SOLUBILITY Slightly soluble in water.
356
 CYCLOPENTASILOXANE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless and clear
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Cyclopentasiloxane, a density of 0.950 g /

cm 3 with the liquid form of colorless raw
material.
APPLICATIONS
Cyclopentasiloxane, the generally is a raw
material commonly used in cosmetics.
Especially hair care products, used
extensively in shampoos for dandruff. It is
also one of main raw materials in the
production of hair serum. It also helps the
pigment dispersion for some products.
 C10 – 8EO
ALCOHOL ETHOXYLATE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Surfactant
CATEGORY
FACTORIAL Nonionic
CATEGORY
TRADE Alcohol ethoxylate ( C10 – 8EO )
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH 215
POINT ( C )
MELTING 30
POINT ( C )
PH 7
RANGE
DENSITY 1.05 g / cm3
SOLUBILITY Soluble in water.
358
 C10 – 8EO
ALCOHOL ETHOXYLATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Colorless and clear
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
Detergents definition of nonionic surfactants
used in cleaners and other branches of
industry. The main application areas,
industrial, institutional and household
detergents and cleaners are.
These include anionic, cationic and nonionic
surfactants can easily be combined with other
APPLICATIONS active. Alkyl aryl sulphonates are fully
compatible with ether sulfonates and sulfated
and sulfonated product. Perfomance
synergistic effects are obtained which allow
the achievement of high level.
Alcohol ethoxylates and n-alkyl-dimethyl-
benzyl ammonium chloride, a mixture of
products based cationic and other non-ionic
surfactant and applied to low-foaming
surfactant.
 C10 – 3EO
ALCOHOL ETHOXYLATE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Surfactant
CATEGORY
FACTORIAL Nonionic
CATEGORY
TRADE Alcohol ethoxylate ( C10 – 3EO )
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH 200
POINT ( C )
MELTING 25
POINT ( C )
PH 6-7
RANGE
DENSITY 1.05 g / cm3
SOLUBILITY Soluble in water.
360
 C10 – 3EO
ALCOHOL ETHOXYLATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Colorless and clear
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
Detergents definition of nonionic surfactants
used in cleaners and other branches of
industry. The main application areas,
industrial, institutional and household
detergents and cleaners are.
These include anionic, cationic and nonionic
surfactants can easily be combined with other
APPLICATIONS active. Alkyl aryl sulphonates are fully
compatible with ether sulfonates and sulfated
and sulfonated product. Perfomance
synergistic effects are obtained which allow
the achievement of high level.
Alcohol ethoxylates and n-alkyl-dimethyl-
benzyl ammonium chloride, a mixture of
products based cationic and other non-ionic
surfactant and applied to low-foaming
surfactant.
 C13 – 8EO
ALCOHOL ETHOXYLATE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Surfactant
CATEGORY
FACTORIAL Nonionic
CATEGORY
TRADE Alcohol ethoxylate ( C13 – 8EO )
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH 230
POINT ( C )
MELTING 27
POINT ( C )
PH 5-7
RANGE
DENSITY 1.150 g / cm3
SOLUBILITY Soluble in water.
362
 C13 – 8EO
ALCOHOL ETHOXYLATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Colorless and clear
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
Detergents definition of nonionic surfactants
used in cleaners and other branches of
industry. The main application areas,
industrial, institutional and household
detergents and cleaners are.
These include anionic, cationic and nonionic
surfactants can easily be combined with other
APPLICATIONS active. Alkyl aryl sulphonates are fully
compatible with ether sulfonates and sulfated
and sulfonated product. Perfomance
synergistic effects are obtained which allow
the achievement of high level.
Alcohol ethoxylates and n-alkyl-dimethyl-
benzyl ammonium chloride, a mixture of
products based cationic and other non-ionic
surfactant and applied to low-foaming
surfactant.
 C 30 - 45
ALKYL METHICONE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Cosmetic ingredient
CATEGORY
FACTORIAL Skin emollient
CATEGORY
TRADE C 30 – 45 Alkyl methicone
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH 28
POINT ( C )
BOILING 91
POINT ( C )
PH Not specified
RANGE
DENSITY 1.020 g / cm3
SOLUBILITY Insoluble in water.
364
 C 30 - 45
ALKYL METHICONE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Usually a skin emollient raw materials used in

APPLICATIONS cosmetic products. In particular, sun care
products, lotions and creams used in skin
care and color cosmetics manufacturing.

In products with a smooth, silky and wake-up

feature to use a soft feeling to the fore. It also
has a unique thickener.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

D
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 DECYL
GLUCOSIDE

GENERAL
DEFINITIONS
CAS 58846 – 77 – 8
NUMBER
GENERAL Cosmetic ingredient
CATEGORY
FACTORIAL Surfactant – nonionic
CATEGORY
TRADE Decyl glucoside
NAME

CHEMICAL
PROPERTIES
CHEMICAL C16H32O6
FORMULA
MOLECULAR 320.43 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING 100
POINT ( C )
PH 3–5
RANGE
DENSITY 1.100 g / cm3
SOLUBILITY Soluble in cold water and hot water.
366
 DECYL
GLUCOSIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic odor
AID It causes an irritation slightly. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Decyl glucoside, density 1.100 g / cm 3 with

the liquid form of colorless raw material.

APPLICATIONS Decyl glycoside used quite cosmetic and

detergent sectors. It is also used in the
manufacture of certain industrial products. A
non-ionic derivatives of irritation is extremely
low. Baby products, bath products and hair
care products available in easily. Desired
work in the wide pH ayarlıg. Plenty of foam
constitutes.
 DECYL
OLEATE

GENERAL
DEFINITIONS
CAS 3687 – 46 – 5
NUMBER
GENERAL Cosmetic ingredient
CATEGORY
FACTORIAL Skin lubricant agent
CATEGORY
TRADE Decyl oleate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Not specified
FORMULA
MOLECULAR Not specified
WEIGHT

MELTING 0
POINT ( C )
BOILING 300
POINT ( C )
FLASH 150
POINT ( C )
DENSITY 0.860 g / cm3
SOLUBILITY Insoluble in water.
368
 DECYL
GLUCOSIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Oily
COLOR Clear and pale yellow
ODOR A characteristic odor slightly.
AID It causes an irritation slightly. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Decyl oleate, density of 0.860 g / cm 3, which,

in liquid form, is a raw material liquid,
APPLICATIONS transparent and pale yellow.

Decyl oleate, quite cosmetic and detergent

industry. It is also used in the manufacture of
certain industrial products. Often used much
in hand and face lotions and creams.
Lubricating feature highlighted in use.
 DECYLAMINE
OXIDE

GENERAL
DEFINITIONS
CAS 2016 – 57 – 1
NUMBER
GENERAL Cosmetic and detergent ingredient
CATEGORY
FACTORIAL Surfactant – nonionic
CATEGORY
TRADE Decylamine oxide
NAME

CHEMICAL
PROPERTIES
CHEMICAL C10H23N
FORMULA
MOLECULAR 157.30
WEIGHT

MELTING 12 - 15
POINT ( C )
BOILING 216
POINT ( C )
PH 7 – 10
RANGE
DENSITY 0.970 g / cm3
SOLUBILITY Soluble in water.
370
 DECYLAMINE
OXIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Slightly viscous liquid.
COLOR Clear and colorless
ODOR A characteristic odor slightly.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Decylamine oxide, with its peculiar smell and

APPLICATIONS consistency is a non-ionic surface active
materials in liquid form.

Decylamine oxide, detergents and foam

stabilizers in the production of many industrial
products are used as thickeners and cleaner.
 DI C12 - 13
ALKYL MALATE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Cosmetic ingredient
CATEGORY
FACTORIAL Skin emollient
CATEGORY
TRADE Di C 12 - 13 Alkyl malate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH Not specified

POINT ( C )
BOILING 550
POINT ( C )
PH Not specified
RANGE
DENSITY 0.920 g / cm3
SOLUBILITY Slightly soluble in water.
372
 DI C12 - 13
ALKYL MALATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and light yellow
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Di C12 - 13 alkyl malate, density 0.920 g /

cm3, a viscous liquid form is a raw material
APPLICATIONS liquid, transparent and light yellow.

Di C12 - 13 alkyl malate, quite used in the

cosmetic industry. Often used in the hair care
products and skin care products pretty. hair
and skin softening feature highlighted in use.
 DIDECYL DIMETHYL
AMMONIUM CHLORIDE

GENERAL
DEFINITIONS
CAS 7173 – 51 – 5
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Disinfectant active
CATEGORY
TRADE Didecyl dimethyl ammonium chloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL C22H48CIN
FORMULA
MOLECULAR 362.10 g / mole
WEIGHT

MELTING 140
POINT ( C )
BOILING Not specified
POINT ( C )
PH 6–9
RANGE
DENSITY 0.920 g / cm3
SOLUBILITY Soluble in water easily.
374
 DIDECYL DIMETHYL
AMMONIUM CHLORIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and light yellow
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Didecyl dimethyl ammonium chloride, behave

has a peculiar odor, liquid form, is a raw
material in a transparent and pale yellow.
APPLICATIONS

Didecyl dimethyl ammonium chloride,

detergent industry and in particular
disinfectant products, industrial products and
disinfectants in particular surgical tools,
disinfectant used in swimming pools and
many other related products.
 DIETHANOLAMINE
DEA

GENERAL
DEFINITIONS
CAS 111 – 42 – 2
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Alkaline agent
CATEGORY
TRADE Diethanolamine ( DEA )
NAME

CHEMICAL
PROPERTIES
CHEMICAL C4H11O4
FORMULA
MOLECULAR 105.40 g / mole
WEIGHT

MELTING 28
POINT ( C )
BOILING 271
POINT ( C )
PH 11 – 12
RANGE
DENSITY 1.097 g / cm3
SOLUBILITY Soluble in water.
376
 DIETHANOLAMINE
DEA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE liquid
COLOR Clear and colorless
ODOR A characteristic ammonia odor.
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Diethanolamine (DEA), with its distinctive

odor, viscous liquid form, transparent,
colorless or slightly yellow color is a raw
material.
APPLICATIONS

Diethanolamine (DEA), adjust pH in many

industrial products, especially detergents and
cleaning. Especially in the production of liquid
detergent used in many oil and dirt solve
solved formula. It is also used in some
chemical raw materials into a water-based
solvent products in the agricultural sector.
 DIETHYLENE
GLYCOL

GENERAL
DEFINITIONS
CAS 111 – 46 – 6
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Dehydrating agent
CATEGORY
TRADE Diethylene glycol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C4H10O3
FORMULA
MOLECULAR 106.20 g / mole
WEIGHT

FREEZING -10
POINT ( C )
BOILING 245
POINT ( C )
FLASH 143
POINT ( C )
DENSITY 1.120 g / cm3
SOLUBILITY Soluble in water easily.
378
 DIETHYLENE
GLYCOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and colorless
ODOR A characteristic odor.
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Diethylene glycol is used as a dehydrating

agent for natural gas; a raw material for the
production of plasticizers and polyester
APPLICATIONS resins; a humectant; a textile lubricant and
coupling agent; a solvent in textile dyeing and
printing; a constituent of hydraulic fluids; a
plasticizer for paper, cork and synthetic
sponges; a solvent in printing inks; a raw
material for the production of esters used as
emulsifiers, demulsifiers, and lubricants; a
selective solvent for aromatics in petroleum
refining.
 DIETHYLHYDROXYLAMINE
DEHA

GENERAL
DEFINITIONS
CAS 3710 – 84 – 7
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Corrosion agent
CATEGORY
TRADE DEHA
NAME

CHEMICAL
PROPERTIES
CHEMICAL C4H11NO
FORMULA
MOLECULAR 89.10 g / mole
WEIGHT

MELTING -26
POINT ( C )
BOILING 127
POINT ( C )
FLASH Not specified
POINT ( C )
DENSITY 0.865 g / cm3
SOLUBILITY Soluble in water easily.
380
 DIETHYLHYDROXYLAMINE
DEHA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and pale yellow
ODOR A characteristic ammonia odor.
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

DEHA, has a peculiar smell of ammonia,

APPLICATIONS liquid form, is transparent and colorless raw
material.

DEHA is used as a corrosion inhibitor in water

treatment chemicals as oxygen scavengers.
Pasivizat is good. It is also used in various
industrial fields.
 DIMETHICONE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Silicone agent
CATEGORY
TRADE Dimethicone
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING Not specified

POINT ( C )
BOILING 232
POINT ( C )
FLASH 250
POINT ( C )
DENSITY 0.960 g / cm3
SOLUBILITY Insoluble in water.
382
 DIMETHICONE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Light viscous liquid
COLOR Clear and colorless
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Dimethicone, density 0.960 g / cm 3 with the

liquid form is a material transparent and
colorless liquid.

APPLICATIONS Dimethicone, quite cosmetic and detergent

industry. Also used in industrial products.
Generally, personal care products, used in
hair care products and skin care products,
and particularly lotions and creams. Softness
to the skin not used in products that feature
highlighted in use.
 DIOCTYL
ETHER

GENERAL
DEFINITIONS
CAS 629 – 82 – 3
NUMBER
GENERAL Industrial and cosmetic ingredient
CATEGORY
FACTORIAL Anti-static agent, lubricant, electrical insulator,
CATEGORY water repellent
TRADE Dioctyl ether
NAME

CHEMICAL
PROPERTIES
CHEMICAL C16H34O
FORMULA
MOLECULAR 242.40 g / mole
WEIGHT

MELTING -7
POINT ( C )
BOILING 286
POINT ( C )
FLASH 135
POINT ( C )
DENSITY 0.806 g / cm3
SOLUBILITY Insoluble in water.
384
 DIOCTYL
ETHER

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic odor.
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

DIOCTYL ETHER, an ether, can act as a

base. They form salts with strong acids and
addition complexes with Lewis acids. The
APPLICATIONS complex between diethyl ether and boron
trifluoride is an example.

Ethers may react violently with strong

oxidizing agents. In other reactions, which
typically involve the breaking of the carbon-
oxygen bond, ethers are relatively inert.
 DIOCTYL DIMETHYL
AMMONIUM CHLORIDE

GENERAL
DEFINITIONS
CAS 5538 – 94 – 3
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Disinfectant agent
CATEGORY
TRADE Dioctyl methyl ammonium chloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL C22H48CIN
FORMULA
MOLECULAR 362.10 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING Not specified
POINT ( C )
PH 6–9
RANGE
DENSITY 0.920 g / cm3
SOLUBILITY Miscible with water.
386
 DIOCTYL DIMETHYL
AMMONIUM CHLORIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and pale yellow
ODOR A characteristic alcohol odor.
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Dioctyl dimethyl ammonium chloride,

odorless and clear liquid form is the raw
material.
APPLICATIONS Dioctyl dimethyl ammonium chloride,
detergents sector, and in particular
disinfectant products used in industrial
products and in particular for the disinfection
of surgical tools in place surface disinfectant
products and formulas.
 DIOCTYL SODIUM
SULFOSUCCINATE

GENERAL
DEFINITIONS
CAS 577 – 11 – 7
NUMBER
GENERAL Surfactant
CATEGORY
FACTORIAL Anionic
CATEGORY
TRADE Dioctyl sodium sulfosuccinate
NAME

CHEMICAL
PROPERTIES
CHEMICAL C20H37NaO7S
FORMULA
MOLECULAR 444.56 g / mole
WEIGHT

MELTING 157
POINT ( C )
BOILING Not specified
POINT ( C )
PH Not specified
RANGE
DENSITY 1.10 g / cm3
SOLUBILITY Partially soluble in water.
388
 DIOCTYL SODIUM
SULFOSUCCINATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Creamy liquid
COLOR White
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Dioctyl sodium sulfosuccinate, and the oily

layer, or cream form and a surfactant raw
material to the anionic form of a solid
APPLICATIONS structure with distinctive odor.

Dioctyl sodium sulfosuccinate, cosmetic,

detergent and emulsifier in the production of
many industrial products are used as
dispersants and wetting agent.
 DIPROPYLENE
GLYCOL

GENERAL
DEFINITIONS
CAS 25265 – 71 – 8
NUMBER
GENERAL Cosmetic ingredient
CATEGORY
FACTORIAL Essential oil agent
CATEGORY
TRADE Dipropylene glycol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C6H14O3
FORMULA
MOLECULAR 134.18 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING 232
POINT ( C )
PH Not specified
RANGE
DENSITY 1.025 g / cm3
SOLUBILITY Soluble in cold water and hot water.
390
 DIPROPYLENE
GLYCOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

DPG; is a colorless, hygroscopic liquid, water,

alcohol, esters, in all proportions with the
organic solvent solution to form the majority
and various vegetable oils and highly soluble
in most organic solvents.
APPLICATIONS
Many sectors used as solvent DPG
major industrial intermediates, unsaturated
polyester resins, plasticizers, alkyd resins,
cosmetics and urethane find application in the
production of poyol and antifoaming agents
are included as additives in industrial soaps
and functional fluid formulations.
 DISODIUM
COCOAMPHODIACETATE

GENERAL
DEFINITIONS
CAS 68650 – 39 – 5 + 7732 – 18 – 5
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Disodium cocoamphodiacetate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING -15
POINT ( C )
BOILING 100
POINT ( C )
PH 8–9
RANGE
DENSITY 1.100 g / cm3
SOLUBILITY Soluble in cold water and hot water.
392
 DISODIUM
COCOAMPHODIACETATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Slightly viscous liquid
COLOR Clear and colorless
ODOR A characteristic odor slightly.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Disodium Cocoamphodiacetate light is

intense and unique with a light fragrance is
transparent and colorless liquid amphoteric
APPLICATIONS surface active materials.

Disodium Cocoamphodiacetate as surface

cleaning and particularly active in the
cosmetics and detergents sector used in
foaming shampoo and baby products. Co-
surfactant materials can be said. An
extremely low irritation surfactant.
 DISODIUM
LAURETH SULFOSUCCINATE

GENERAL
DEFINITIONS
CAS 49754 – 59 – 4
NUMBER
GENERAL Detergent and cosmetic ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Disodium laureth sulfosuccinate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH 100
POINT ( C )
BOILING 100
POINT ( C )
PH 5–7
RANGE
DENSITY 1.0 g / cm3
SOLUBILITY Soluble in cold water and hot water.
394
 DISODIUM
LAURETH SULFOSUCCINATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Slightly viscous liquid
COLOR Clear and pale yellow
ODOR A characteristic odor slightly.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Disodium laureth sulfosuccinate is a chemical

APPLICATIONS found in hair and skin products. Quite simply,
it’s a de-greasing, emulsifier, and foaming
agent used in many shampoos and other
cleaning products much like SLS and SLES.
It’s not an organic substance, but it’s also not
like other chemicals either.
 DMDM
HYDANTOIN

GENERAL
DEFINITIONS
CAS 6440 – 58 – 0
NUMBER
GENERAL Detergent and cosmetic ingredient
CATEGORY
FACTORIAL Protective
CATEGORY
TRADE DMDM Hydantoin
NAME

CHEMICAL
PROPERTIES
CHEMICAL C17H12N2O4
FORMULA
MOLECULAR 188 g / mole
WEIGHT

MELTING 220
POINT ( C )
BOILING Not specified
POINT ( C )
PH 6–8
RANGE
DENSITY 1.160 g / cm3
SOLUBILITY Slightly soluble in water.
396
 DMDM
HYDANTOIN

PHYSICAL PROPERTIES
AND
USES
APPEARANCE liquid
COLOR Pale yellow
ODOR A characteristic odor slightly.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

DMDM hydantoin, has a characteristic odor, a

liquid form is a raw material liquid,
APPLICATIONS transparent and yellow.

DMDM Hydantoin, used as preservatives in

many cosmetic products.
 D - PANTHENOL

GENERAL
DEFINITIONS
CAS 81 – 13 – 0
NUMBER
GENERAL Cosmetic ingredient
CATEGORY
FACTORIAL Provitamin
CATEGORY
TRADE D – Panthenol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C9H19NO4
FORMULA
MOLECULAR 205.26 g / mole
WEIGHT

MELTING 17 – 18
POINT ( C )
BOILING 120
POINT ( C )
PH 9 - 10
RANGE
DENSITY 1.200 g / cm3
SOLUBILITY Soluble in water.
398
 D – PANTHENOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE liquid
COLOR Clear and colorless
ODOR A characteristic odor slightly.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

D - panthenol, density 1.200 g / cm 3 with the

liquid form of colorless raw material.

D - panthenol typically is a material widely

APPLICATIONS used in cosmetics. Particularly in skincare
and hair care products are used quite in.
Provitamin B5 is used for the treatment of
numerous problems, including particularly the
hair dandruff. Observed that diaper rash
cream, shower gel and used for the same
purpose.
 DOLOMITE

GENERAL
DEFINITIONS
CAS 1332 – 58 – 7
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Filler agent
CATEGORY
TRADE Dolomite
NAME

CHEMICAL
PROPERTIES
CHEMICAL CaMg( CO3 )2
FORMULA
MOLECULAR Not specified
WEIGHT

MELTING 1770
POINT ( C )
BOILING Not specified
POINT ( C )
PH 7–9
RANGE
DENSITY 2.860 g / cm3
SOLUBILITY Insoluble in water.
400
 DOLOMITE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or crystal
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Dolomite, it finds use in many industrial

areas, including industrial detergents in
APPLICATIONS particular. In particular, the main raw material
used in the scouring powder.

Dolomite is the opportunity to use raw

materials in their chemical structure as the
main filler.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

E
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 EDTA
ETHYLENEDIAMINETETRAACETIC ACID

GENERAL
DEFINITIONS
CAS 60 – 00 – 4
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Sequestering
CATEGORY
TRADE Edta
NAME

CHEMICAL
PROPERTIES
CHEMICAL C10H16N2O8
FORMULA
MOLECULAR 292.24 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING Not specified
POINT ( C )
PH 8–9
RANGE
DENSITY 0.860 g / cm3
SOLUBILITY Soluble in cold water and hot water.
402
 EDTA
ETHYLENEDIAMINETETRAACETIC ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Edta in powder form and does not smell, is a

solid raw material in white.

APPLICATIONS Edta, including detergent first, rather than due

to the sequestering and chelating property is
used in many industrial fields. In addition, the
separation of metal ions, raw assist in
degreasing baths, also find use in
photography and the electrolysis process.
 ESTERQUAT

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Detergent and ındustrial ingredient
CATEGORY
FACTORIAL Cationic softening agent
CATEGORY
TRADE Esterquat
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING Not specified

POINT ( C )
BOILING Not specified
POINT ( C )
PH 6–8
RANGE
DENSITY 1.070 g / cm3
SOLUBILITY Soluble in cold water and hot water.
404
 ESTERQUAT

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Paste
COLOR Slightly yellow
ODOR A characteristic alcohol odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Esterquat usually with isopropyl alcohol odor,

APPLICATIONS which is quite hard or creamy, buttery is raw
material having a cationic character.

Esterquat used as the main raw material in

the detergent industry and in particularly
softeners.
 ETHYL
ALCOHOL

GENERAL
DEFINITIONS
CAS 64 – 17 – 5
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Solvent and disinfectant agent
CATEGORY
TRADE Ethyl alcohol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C2H5OH
FORMULA
MOLECULAR 46.06 g / mole
WEIGHT

MELTING / FREEZING -114.5

POINT ( C )
BOILING 78
POINT ( C )
FLASH 16.5
POINT ( C )
DENSITY 0.790 g / cm3
SOLUBILITY Soluble in cold water.
406
 ETHYL
ALCOHOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic alcohol odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Ethyl alcohol, which itself has a fragrance

liquid form, transparent and colorless solvent
is an organic raw character.
APPLICATIONS Ethyl alcohol, including detergent first,
solvents and industrial products used as raw
materials in some help. In degreaser,
disinfect soil removal and surface cleaning
products and surgical tools, disinfectant gel
used for hand and face. In cosmetics, the
cologne construction used in the manufacture
of perfumes and personal care products.
 ETHYL
ACETATE

GENERAL
DEFINITIONS
CAS 141 – 78 – 6
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Solvent agent
CATEGORY
TRADE Ethyl acetate
NAME

CHEMICAL
PROPERTIES
CHEMICAL C4H8O2
FORMULA
MOLECULAR 88.10 g / mole
WEIGHT

MELTING / FREEZING -83

POINT ( C )
BOILING 77
POINT ( C )
FLASH Not specified
POINT ( C )
DENSITY 0.902 g / cm3
SOLUBILITY Soluble in cold water.
408
 ETHYL
ACETATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic odor.
AID It causes an irritation slightly. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Ethyl Acetate is used as a solvent for

chemical reactions. Because of its odor it is
often used in cosmetics and its smell is
associated with nail polishes. Additionally, it is
APPLICATIONS used in confectionery, perfumes, and fruits
because it evaporates at a fast rate, leaving
but the scent of the perfume on the skin.

Ethyl acetate is an effective poison for use in

insect collector as its vapors are a respiratory
tract irritant whose vapors can kill the insect
quickly without destroying it, leaving it intact
for study.
 ETHYL
PARABEN

GENERAL
DEFINITIONS
CAS 120 – 47 – 8
NUMBER
GENERAL Detergent and cosmetic ingredient
CATEGORY
FACTORIAL protective agent
CATEGORY
TRADE Ethyl paraben
NAME

CHEMICAL
PROPERTIES
CHEMICAL C9H10O3
FORMULA
MOLECULAR 166.18 g / mole
WEIGHT

MELTING / FREEZING 116

POINT ( C )
BOILING 297
POINT ( C )
FLASH Not specified
POINT ( C )
DENSITY 1.050 g / cm3
SOLUBILITY Soluble in hot water and cold water.
410
 ETHYL
PARABEN

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

A preservative in the cosmetic and detergent

APPLICATIONS industry is quite used. Although recently
banned their usage in Europe and America
are going to use me in some countries.

In particular skin care products, used in hair

care products and color cosmetics. It will
have the opportunity to use periods in the
detergent industry.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

F
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 FORMALDEHYDE

GENERAL
DEFINITIONS
CAS 50 – 00 – 0 + 7732 – 18 – 5
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL protective agent
CATEGORY
TRADE Formaldehyde solution
NAME

CHEMICAL
PROPERTIES
CHEMICAL CH2O
FORMULA
MOLECULAR 30.02 g / mole
WEIGHT

MELTING / FREEZING -15

POINT ( C )
BOILING 98
POINT ( C )
PH 3
RANGE
DENSITY 1.080 g / cm3
SOLUBILITY Soluble in water.
412
 FORMALDEHYDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic pungent odor
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Formaldehyde, and a characteristic pungent

odor, liquid form, a raw material is clear.
APPLICATIONS
Formaldehyde, used as a preservative in
many sectors, including in particular
detergent. It is forbidden to use as a
preservative in recent years. It also found
uses as raw materials in industrial areas and
in particular resins.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

G
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 GLYCERINE

GENERAL
DEFINITIONS
CAS 56 – 81 – 5
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Moisturizer agent
CATEGORY
TRADE Glycerine
NAME

CHEMICAL
PROPERTIES
CHEMICAL C3H5( OH )3
FORMULA
MOLECULAR 92.09 g / mole
WEIGHT

MELTING / FREEZING 19
POINT ( C )
BOILING 290
POINT ( C )
PH 7
RANGE
DENSITY 1.260 g / cm3
SOLUBILITY Soluble in water.
414
 GLYCERINE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and colorless
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Glycerine, non-odor, transparent and

colorless, slightly viscous liquid is a raw
material form.
APPLICATIONS
Glycerine, detergent and used in the
cosmetics industry as well as moisturizing
and protecting skin. Glycerin is also the main
raw material of rubber polisher in auto care
products. Also in the paper industry, rubber
production is used in textile and many other
industries.
 GLYCERYL
MONOOLEATE

GENERAL
DEFINITIONS
CAS 25496 – 72 – 4
NUMBER
GENERAL Industrial and food ingredient
CATEGORY
FACTORIAL Emulsifiers and oilling agent
CATEGORY
TRADE Glyceryl monooleate
NAME

CHEMICAL
PROPERTIES
CHEMICAL C21H40O4
FORMULA
MOLECULAR 356.54 g / mole
WEIGHT

MELTING / FREEZING Not specified

POINT ( C )
BOILING 200
POINT ( C )
FLASH 175
POINT ( C )
DENSITY 0.900 g / cm3
SOLUBILITY Partially soluble in water.
416
 GLYCERYL
MONOOLEATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Oily liquid
COLOR Clear and yellow
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Glyceryl monooleate, a density of 0.900

g/cm3 which, oily and slightly viscous form, is
a raw material liquid, transparent and yellow.
APPLICATIONS
Glyceryl monooleate is used in cosmetics and
industrial sectors. It is usually the forefront in
the use of the ability of lubricant and
emulsified. Plenty includes Evita. Color
cosmetics, skin care products and hair care
products used in their production.
 GLYCERYL
MONOSTEARATE

GENERAL
DEFINITIONS
CAS 31566 – 31 – 1
NUMBER
GENERAL Industrial and food ingredient
CATEGORY
FACTORIAL Emulsifiers agent
CATEGORY
TRADE Glyceryl monostearate
NAME

CHEMICAL
PROPERTIES
CHEMICAL C21H42O4
FORMULA
MOLECULAR 358.63 g / mole
WEIGHT

MELTING / FREEZING 55
POINT ( C )
BOILING 260
POINT ( C )
PH 6–7
RANGE
DENSITY 0.970 g / cm3
SOLUBILITY Insoluble in water.
418
 GLYCERYL
MONOSTEARATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal or powder
COLOR White and yellow
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Glycerol monostearate, odorless solid raw

materials in powder form or a granular white
or off-white color.
APPLICATIONS

Glycerol monostearate, are used as

emulsifiers in certain detergent formulations.
In addition, an oven, find use in bread and
bakery products to shine. In addition, ice
cream and desserts is used to emulsify fat.
 GUAR
GUM

GENERAL
DEFINITIONS
CAS 9000 – 30 – 0
NUMBER
GENERAL Industrial and food ingredient
CATEGORY
FACTORIAL Thickener
CATEGORY
TRADE Guar gum
NAME

CHEMICAL
PROPERTIES
CHEMICAL Natural
FORMULA
MOLECULAR Natural
WEIGHT

MELTING / FREEZING Not specified

POINT ( C )
BOILING Not specified
POINT ( C )
PH 5–6
RANGE
DENSITY 1.200 g / cm3
SOLUBILITY Insoluble in water. Disperible in water
420
 GUAR
GUM

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White off
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

GUAR GUM, ice cream production, product

collection and used for thickening. It is a very
important food thickener in ice cream
production.
APPLICATIONS
GUAR GUM, except ice cream, sauces, the
condiments used as a thickener in
mayonnaise and ketchup.

GUAR GUM, except the food sector, in

industry and in the detergent industry in
particular thickening gel in making fertilizer
and organic agriculture is used as a gelling
agent.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

H
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 HYDRAZINE

GENERAL
DEFINITIONS
CAS 302 – 01 – 2
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Corrosion agent
CATEGORY
TRADE Hydrazine
NAME

CHEMICAL
PROPERTIES
CHEMICAL N2H4
FORMULA
MOLECULAR 32.05 g / mole
WEIGHT

MELTING / FREEZING 1–2

POINT ( C )
BOILING 113.5
POINT ( C )
PH Not specifeid
RANGE
DENSITY 1.100 g / cm3
SOLUBILITY Soluble in water.
422
 HYDRAZINE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic odor
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Hydrazine, which is a slightly peculiar smell,

APPLICATIONS clear and colorless, is a liquid ingredient.

Hydrazine, especially water treatment be

used in many industrial fields. Good oxygen
scavenging and therefore best used as a
corrosion inhibitor.
 HYDROFLUORIC
ACID

GENERAL
DEFINITIONS
CAS 7664 – 39 – 3
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Strongest inorganic acid
CATEGORY
TRADE Hydrofluoric acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL HF
FORMULA
MOLECULAR Aqueous mixture
WEIGHT

MELTING / FREEZING Not specified

POINT ( C )
BOILING Not specified
POINT ( C )
PH 1
RANGE
DENSITY 1.150 g / cm3
SOLUBILITY Soluble in water.
424
 HYDROFLUORIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR Odorless
AID It causes an irritation strongly.
MEASURES
STORAGE
Keep cool and dry place

Hydrochloric acid is the name given to the

aqueous solution of hydrogen fluoride.
Especially it used in the glass processing
industry. Because glass abrasive effect, in
glass bottles can not hide. It is a clear liquid
APPLICATIONS identified as HF. Rather it should be
considered in use.

Opening severe mercury poisoning by

inhalation, contact with the skin can cause
deep burns. Hydrofluoric acid is also used in
high-octane gasoline production. Also among
the areas; Purification of aluminum and
uranium, rust removal in laundry products is
available as catalysts in the oil industry.
 HYDROCHLORIC
ACID

GENERAL
DEFINITIONS
CAS 7647 – 01 – 0
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Strongest mineral acid
CATEGORY
TRADE Hydrochloric acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL HCI
FORMULA
MOLECULAR 36.46
WEIGHT

MELTING / FREEZING -62

POINT ( C )
BOILING 108
POINT ( C )
PH 1
RANGE
DENSITY 1.170 g / cm3
SOLUBILITY Soluble in water.
426
 HYDROCHLORIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR Odorless
AID It causes an irritation strongly.
MEASURES
STORAGE
Keep cool and dry place

Hydrochloric acid is a kind of inorganic acids

found use in a variety of fields. Acid
concentration, it varies according to the work
site is used. Hydrochloric acid pickling of
APPLICATIONS steel, the formation of the organic compound
is used in many industries to ensure the
production of sub-fields and the pH stability of
the inorganic materials in the industrial fields

Hydrochloric acid is the main ingredient in the

chemical. This acid is used in many small
scale industries. Leather processing,
cleaning, construction industry is one of them.
 HYDROGEN
PEROXIDE

GENERAL
DEFINITIONS
CAS 7722 – 84 – 1
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Active oxygen agent
CATEGORY
TRADE Hydrogen peroxide
NAME

CHEMICAL
PROPERTIES
CHEMICAL H2O2
FORMULA
MOLECULAR 34.01
WEIGHT

MELTING / FREEZING -10

POINT ( C )
BOILING 150
POINT ( C )
PH 2–3
RANGE
DENSITY 1.135 g / cm3
SOLUBILITY Soluble in water.
428
 HYDROGEN
PEROXIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR Acharacteristic odor.
AID It causes an irritation strongly. In contact,
MEASURES wash plenty of water.
STORAGE
Keep cool and dry place

Hydrogen peroxide, no smell, the brown

color is a solid raw crystal or powder form.
APPLICATIONS
Hydrogen peroxide is a very important
incorporating active oxygen bleach. Including
detergent bs, it finds use in many industrial
fields. Cosmetics, textile, paper industry, the
pharmaceutical industry and is used in many
industries.
 HYDROXYPROPYL
METHYLCELLULOSE

GENERAL
DEFINITIONS
CAS 9050 – 31 – 1
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Thickener
CATEGORY
TRADE Hydroxypropyl methylcellulose
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING / FREEZING Not spesified

POINT ( C )
BOILING Not specified
POINT ( C )
PH 8 – 10
RANGE
DENSITY Not spesified
SOLUBILITY Insoluble in water. Dispersıble in water.
430
 HYDROXYPROPYL
METHYLCELLULOSE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White or white – off
ODOR Odorless
AID It causes no irritation . In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Hydroxypropyl methyl cellulose, one of the

cold water soluble additives. Methyl cellulose
solution is heated and the viscosity is
increased from 50 to 55 ° C "is gelled. This
gelation point may be raised relative to the
hydroxypropyl groups (max 85 ° "ye) .Jelleş
APPLICATIONS point, it modified using additives.

With a plurality of electrolyte sucrose,

glycerol, sorbitol and reducing the gelation
point it has enhancing effect of ethanol and
propylene glycol. Emulsifiers, film former,
protective colloids, stabilizers, may be used
as suspending agents and thickeners. Bakery
products, mayonnaise, can be used in ice
cream and other dairy products.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

I
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 ISOPROPYL ALCOHOL
IPA

GENERAL
DEFINITIONS
CAS 67 – 63 – 0
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Solvent
CATEGORY
TRADE Isopropyl alcohol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C3H8O
FORMULA
MOLECULAR 61.10 g / mole
WEIGHT

MELTING -88.5
POINT ( C )
BOILING 82.5
POINT ( C )
PH Not specifeid
RANGE
DENSITY 0.785 g / cm3
SOLUBILITY Soluble in water.
432
 ISOPROPYL ALCOHOL
IPA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic alcohol odor
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Isopropyl alcohol, which has a smell its

liquid form, transparent and colorless solvent
is an organic raw character.
APPLICATIONS Isopropyl alcohol, detergents and industrial
degreasing cleaning products used as soil
removal. In particular, clear glass production,
surface cleaners, dirt and oils resolve in
making auto car perfume, fragrance is used
quite often in the manufacturing room. Water-
based and used in the manufacture of auto
brake pads spray.
 ISOBUTYL
ALCOHOL

GENERAL
DEFINITIONS
CAS 78 – 83 – 1
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Solvent
CATEGORY
TRADE Isobutyl alcohol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C4H10O
FORMULA
MOLECULAR 74.12 g / mole
WEIGHT

MELTING -108
POINT ( C )
BOILING 107
POINT ( C )
PH Not specifeid
RANGE
DENSITY 0.800 g / cm3
SOLUBILITY Slightly soluble in water.
434
 ISOBUTYL
ALCOHOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic alcohol odor
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Isobutyl alcohol, food flavorings used in the

manufacturing process. In addition, as a
solvent in paints and varnishes industry, the
APPLICATIONS food industry in the manufacture of ink as a
flavoring agent in the production of
automotive paint and lacquer, the contribution
of gasoline to reduce icing in the carburetor,
as an additive for automotive paint cleaner,
plastics, in rubber and other dispersions sees
use as a plasticizer.
 ISOPROPYL
ACETATE

GENERAL
DEFINITIONS
CAS 108 – 22 – 5
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Solvent
CATEGORY
TRADE Isopropyl acetate
NAME

CHEMICAL
PROPERTIES
CHEMICAL C5H10O2
FORMULA
MOLECULAR 102.13 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING 89
POINT ( C )
PH Not specifeid
RANGE
DENSITY 0.870 g / cm3
SOLUBILITY Soluble in water.
436
 ISOPROPYL
ACETATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic odor
AID It causes an irritation slightly. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Isopropyl acetate is used as solvent in the

APPLICATIONS food industry and especially the areas of food
flavorings.

Also oils for the manufacture of cellulose and

used Iso propyl acetate solvent for printing
inks, sees use in the cosmetics industry and
the plastics industry.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

L
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

LINEAR ALKYLBENZENE SULFONIC ACID
LABSA

GENERAL
DEFINITIONS
CAS 27176 – 87 – 0
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Anionic surfactant
CATEGORY
TRADE Linear alkylbenzene sulfonic acid ( LABSA )
NAME

CHEMICAL
PROPERTIES
CHEMICAL CH3(CH2)11C6H4SO3H
FORMULA
MOLECULAR 326.49 g / mole
WEIGHT

MELTING 10
POINT ( C )
BOILING 315
POINT ( C )
PH 2
RANGE
DENSITY 1.200 g / cm3
SOLUBILITY Soluble in water.
438
LINEAR ALKYLBENZENE SULFONIC ACID
LABSA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Brown
ODOR A characteristic acidic odor
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

LABSA, Linear Alkyl Benzene (LAB) 's result

of reaction with SO3 (sulfonation) is formed.
Nowadays, liquid, gel or powder detergent
LABSA main surfaces of the process is used
APPLICATIONS as the active ingredient.

One of the main raw material of synthetic

detergent industry. Laundry, dishwasher
powder detergent, detergent gels, liquid
soaps, cleaning powder, fatty soaps and so
on. as. As mercerized and washing agents
used in the textile industry.
 LAKE
ALLURA RED AC

GENERAL
DEFINITIONS
CAS 25956 – 17 – 6
NUMBER
GENERAL Food ingredient
CATEGORY
FACTORIAL Food dye
CATEGORY
TRADE Lake allura red AC
NAME

CHEMICAL
PROPERTIES
CHEMICAL C18H14N2Na2O8S2
FORMULA
MOLECULAR 496.42 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING Not specified
POINT ( C )
PH Not specified
RANGE
DENSITY Not specified
SOLUBILITY Insoluble in water. Soluble in oil
440
 LAKE
ALLURA RED AC

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR Red
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
Synthetic food dyes which are oil-based or oil-
soluble class Lake allura red AC allowed in
food coloring in products are used in a limited
amount of food codex. Ice cream production,
icy drinks, needed in sparkling beverages,
soda is used in fruit production.
Also in the production of confectionery
APPLICATIONS products, jellies, flavored drinks, sweetened
and low-sugar chewing gum in kind, bakery
products, confectionery, etc. it is used in
many food production.Food except
pharmaceuticals, cosmetics, detergent
products, car care products, in a small
amount of agricultural products, cleaning
products, colored stones, play dough, etc. are
also used for coloring in contact with people
of many products
Lake allura red AC give a bright red color
and the food is fat-soluble paint.
 LAKE
AMARANTH

GENERAL
DEFINITIONS
CAS 915 – 67 – 3
NUMBER
GENERAL Food ingredient
CATEGORY
FACTORIAL Food dye
CATEGORY
TRADE Lake amaranth
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING Not specified

POINT ( C )
BOILING Not specified
POINT ( C )
PH 6
RANGE
DENSITY 0.500 – 0.700 g / cm3
SOLUBILITY Insoluble in water. Soluble in oil
442
 LAKE
AMARANTH

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR Bluish red
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Synthetic food dyes, which are used in limited

quantities of class LAKE AMARANTH
permitted products in the food codex.
APPLICATIONS Food except pharmaceuticals, cosmetics,
cleaning products, colored stones, play
dough, etc. are also used for coloring many
people in contact with the product. Which can
be emulsified with the help of some
emulsifiers can be used in water-based
products.

LAKE AMARANTH food dye red color and a

fat soluble food dyes dispersed in oil.
 LAKE
PONCEAU 4R

GENERAL
DEFINITIONS
CAS 2611 – 82 – 7
NUMBER
GENERAL Food ingredient
CATEGORY
FACTORIAL Food dye
CATEGORY
TRADE Lake ponceau 4R
NAME

CHEMICAL
PROPERTIES
CHEMICAL C20H11N2Na3O10S3
FORMULA
MOLECULAR 604.46 g / mole
WEIGHT

FOOD E 124
E CODE
BOILING Not specified
POINT ( C )
PH 6
RANGE
DENSITY 0.500 – 0.700 g / cm3
SOLUBILITY Insoluble in water. Soluble in oil
444
 LAKE
PONCEAU 4R

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or granular
COLOR Red
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Synthetic food dyes, which are used in limited

quantities of class LAKE PONCEAU 4R
permitted products in the food codex.
Food except pharmaceuticals, cosmetics,
APPLICATIONS cleaning products, colored stones, play
dough, etc. are also used for coloring many
people in contact with the product. Which can
be emulsified with the help of some
emulsifiers can be used in water-based
products.

LAKE PONCEAU 4R food dye red color and a

fat soluble food dyes dispersed in oil.
 LAURYL BETAINE
POWDER

GENERAL
DEFINITIONS
CAS 683 – 10 – 3
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Lauryl betaine powder
NAME

CHEMICAL
PROPERTIES
CHEMICAL C16H33NO2
FORMULA
MOLECULAR 271.44 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING Not specified
POINT ( C )
PH Not specified
RANGE
DENSITY 1.200 g / cm3
SOLUBILITY Soluble in water.
446
 LAURYL BETAINE
POWDER

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
It is a hair and skin conditioner, a mild
surface-active agent (surfactant) and works
well in shampoo, shower gel or any cleansing
product.
Surfactants are part water-soluble and part
oil-soluble, allowing the oil and water to
APPLICATIONS become dispersed. Lauryl betaine is capable
of carrying both a positive and a negative
charge, making it a useful stabiliser.
It improves quality and stability of foam,
making it more durable in the presence of oil
and dirt.The mildness of lauryl betaine (and
its skin and hair conditioning properties)
makes this an excellent ingredient to use
across our range of shower gels, shampoos
and bath products.
 LAURYL BETAINE
LIQUID

GENERAL
DEFINITIONS
CAS 683 – 10 – 3
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Lauryl betaine liquid
NAME

CHEMICAL
PROPERTIES
CHEMICAL C16H33NO2
FORMULA
MOLECULAR 271.44 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING 100
POINT ( C )
PH 6–8
RANGE
DENSITY 1.050 g / cm3
SOLUBILITY Soluble in water.
448
 LAURYL BETAINE
LIQUID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and light yellow
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
It is a hair and skin conditioner, a mild
surface-active agent (surfactant) and works
well in shampoo, shower gel or any cleansing
product.
Surfactants are part water-soluble and part
oil-soluble, allowing the oil and water to
APPLICATIONS become dispersed. Lauryl betaine is capable
of carrying both a positive and a negative
charge, making it a useful stabiliser.
It improves quality and stability of foam,
making it more durable in the presence of oil
and dirt. The mildness of lauryl betaine (and
its skin and hair conditioning properties)
makes this an excellent ingredient to use
across our range of shower gels, shampoos
and bath products.
 LAURYL
GLUCOSIDE

GENERAL
DEFINITIONS
CAS 59122 – 55 – 3
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Lauryl glucoside
NAME

CHEMICAL
PROPERTIES
CHEMICAL C18H36O6
FORMULA
MOLECULAR 348.48 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING Not specified
POINT ( C )
PH 9.5
RANGE
DENSITY 1.0 g / cm3
SOLUBILITY Soluble in water.
450
 LAURYL
GLUCOSIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Lauryl glucoside is an non-ionic surfactant

that can be used as a foaming agent,
conditioner or emulsifier. Lauryl glucoside has
excellent foaming capacity and good
APPLICATIONS dermatological compatibility. Therefore it is
suitable for use as a base surfactant or a co-
surfactant in cosmetic surfactant cleansing
preparations.
Products to Use in
 Shower Gel
 Shampoo
 Face Wash
 Bath Foam
 LAURYLDIMETHYLAMINE
OXIDE

GENERAL
DEFINITIONS
CAS 1643 – 20 – 5
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Lauramine oxide
NAME

CHEMICAL
PROPERTIES
CHEMICAL C14H31NO
FORMULA
MOLECULAR 229.41 g / mole
WEIGHT

FLASH 94
POINT ( C )
BOILING 100
POINT ( C )
PH 8
RANGE
DENSITY 0.965 g / cm3
SOLUBILITY Soluble in water.
452
 LAURYLDIMETHYLAMINE
OXIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and light yellow
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

In cosmetics and personal-care products,

Lauramine oxides are amine oxides that are
used mostly in hair-care products as foam
APPLICATIONS builders and stabilizers, viscosity enhancers,
emollients, conditioners, emulsifiers, antistatic
agents and wetting agents.

Lauramine oxides are used mainly in hair-

care products such as shampoos, hair rinses,
tonics and hair-grooming aids.
 LIQUID
PARAFFIN

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Skin emollient
CATEGORY
TRADE Liquid paraffin
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

FLASH 150
POINT ( C )
BOILING 350
POINT ( C )
PH Not specified
RANGE
DENSITY 0.845 g / cm3
SOLUBILITY Insoluble in water. Soluble in petroleum oils.
454
 LIQUID
PARAFFIN

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid oily
COLOR Clear and colorless
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Liquid paraffin is a type of medicine

called a laxative. It works by softening
and lubricating the stools. This helps the
stools to move more easily through the
bowel.
APPLICATIONS This medicine relieves constipation,
making stools easier to pass. This means
it can also be used to reduce pain
associated with passing stools in people
with conditions affecting the anus, such
as piles (haemorrhoids) or anal fissure.

It is not often used, as the liquid paraffin

can sometimes leak from the bottom.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

M
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 MAGNESIUM HYDROXIDE
SOLID

GENERAL
DEFINITIONS
CAS 1309 – 42 – 8
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Magnesium source
CATEGORY
TRADE Magnesium hydroxide powder
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mg ( OH )2
FORMULA
MOLECULAR 58.32 g / mole
WEIGHT

MELTING 350
POINT ( C )
BOILING Not specified
POINT ( C )
PH Not specified
RANGE
DENSITY 2.360 g / cm3
SOLUBILITY Slightly soluble in water.
456
 MAGNESIUM HYDROXIDE
SOLID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Magnesium is a naturally occurring mineral.

Magnesium is important for many systems in
the body especially the muscles and nerves.
APPLICATIONS Magnesium hydroxide also reduces stomach
acid, and increases water in the intestines
which may induce defecation.

Magnesium hydroxide is used as a laxative to

relieve occasional constipation (irregularity)
and as an antacid to relieve indigestion, sour
stomach, and heartburn.
 MAGNESIUM HYDROXIDE
LIQUID

GENERAL
DEFINITIONS
CAS 1309 – 42 – 8 + 7732 – 18 – 5
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Magnesium source
CATEGORY
TRADE Magnesium hydroxide liquid
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING 2100
POINT ( C )
BOILING Not specified
POINT ( C )
PH 10 - 11
RANGE
DENSITY 1.45 g / cm3
SOLUBILITY Slightly soluble in water. Dispersible in water.
458
 MAGNESIUM HYDROXIDE
LIQUID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR blurry
ODOR A characteristic odor
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Magnesium hydroxide, known for food code E

528 , gray and raw materials is a unique
fragrant liquid form.
APPLICATIONS
Magnesium hydroxide, the water forms a
suspension known as milk of magnesia. This
suspension is used as an antacid and
laxative.
In addition, strong alkalis, used as acidity
regulator. Rennet in cheese-enhancing and
protecting the color of vegetables during
canning process is used as a stabilizer.
 MAGNESIUM
CARBONATE

GENERAL
DEFINITIONS
CAS 23389 – 33 – 5
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Food and medical agent
CATEGORY
TRADE Magnesium carbonate
NAME

CHEMICAL
PROPERTIES
CHEMICAL MgCO3
FORMULA
MOLECULAR 84.3 g / mole
WEIGHT

MELTING 662
POINT ( C )
BOILING Not specified
POINT ( C )
PH 8
RANGE
DENSITY 2.950 g / cm3
SOLUBILITY Slightly soluble in water.
460
 MAGNESIUM
CARBONATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

MgCO3 is also used in flooring, fireproofing,

fire extinguishing compositions, cosmetics,
dusting powder, and toothpaste. Other
applications are as filler material, smoke
suppressant in plastics, a reinforcing agent in
APPLICATIONS neoprene rubber, drying agent, a laxative to
loosen the bowels, and color retention in
foods. In addition, high purity magnesium
carbonate is used as antacid and as an
additive in table salt to keep it free flowing.
Magnesium carbonate is fortunately both very
safe and extremely abundant. It can be
acquired easily and cheaply and is relatively
safe to handle as long as one is careful not to
get it in the eyes, where it is an irritant.
 MAGNESIUM
CHLORIDE

GENERAL
DEFINITIONS
CAS 7791 – 18 – 6
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Typical ionic halides
CATEGORY
TRADE Magnesium chloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL MgCI2.6H2O
FORMULA
MOLECULAR 203.30 g / mole
WEIGHT

MELTING 118
POINT ( C )
BOILING Not specified
POINT ( C )
PH 7
RANGE
DENSITY 1.590 g / cm3
SOLUBILITY Soluble in water.
462
 MAGNESIUM
CHLORIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
Magnesium chloride in water and soluble in
alcohol. Cement, drilling and grinding wheels,
the binding of chemical production and
powder, magnesium metal and production of
fire-proofing agent, as an additive in textile
and paper making, using disinfectants, fire
extinguishers and used in ceramics.
APPLICATIONS Magnesium chloride, highways or ice in the
ice against the rock salt instead of racking
use in recent years have become
widespread. In winter the liquid magnesium
chloride before precipitation to dry before
freezing the wet road surface or ground
spraying ice or snow is prevented from
sticking to each other and connected to the
road.
Magnesium chloride is used as icing
inhibitors can be reduced corrosivity with
other chemicals added to the solution
 MAGNESIUM LAURETH
SULFATE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Magnesium laureth sulfate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING Not specified

POINT ( C )
BOILING 100
POINT ( C )
PH 6–8
RANGE
DENSITY 1.050 g / cm3
SOLUBILITY Partially soluble in water.
464
 MAGNESIUM LAURETH
SULFATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and light yellow
ODOR A characteristic odor
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Generally, the main raw materials used in

APPLICATIONS cosmetic and detergent products. Cosmetics;
shower gels in the production of hygiene
products, and wipes used in hair care
formulations.
 MAGNESIUM
OXIDE

GENERAL
DEFINITIONS
CAS 1309 – 48 – 4
NUMBER
GENERAL Industrial and food ingredient
CATEGORY
FOOD E 530
E CODE
TRADE Magnesium oxide
NAME

CHEMICAL
PROPERTIES
CHEMICAL MgO
FORMULA
MOLECULAR 40.30 g / cm3
WEIGHT

MELTING 2800
POINT ( C )
BOILING 3600
POINT ( C )
PH Not specified
RANGE
DENSITY 3.600 g / cm3
SOLUBILITY Slightly soluble in water.
466
 MAGNESIUM
OXIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Magnesium oxide, known for its food code

E 530, with chemical formula MgO and 40.3
g / mole molecular weight of the white,
APPLICATIONS odorless and which is a raw material in
powder form.

Magnesium oxide, are quite raw materials

used in industrial fields, in the food industry,
as anti-agglomeration agents and acidic
agent.
 MAGNESIUM
SILICATE

GENERAL
DEFINITIONS
CAS 1343 – 88 – 0
NUMBER
GENERAL Industrial and food ingredient
CATEGORY
FOOD E 553
E CODE
TRADE Magnesium silicate
NAME

CHEMICAL
PROPERTIES
CHEMICAL MgO:SiO2(x)H2O
FORMULA
MOLECULAR Not specified
WEIGHT

MELTING 1910
POINT ( C )
BOILING Not specified
POINT ( C )
PH Not specified
RANGE
DENSITY 2.100 g / cm3
SOLUBILITY Insoluble in water.
468
 MAGNESIUM
SILICATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or crystal
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Magnesium silicate, known by E 553 food

code is an odorless white crystal and raw
materials. Melting point is quite high.
Insoluble in water.
APPLICATIONS Magnesium silicate, as well as use in different
industrial sector, in the food industry and, in
particular, the dough baking soda in the
production, as additives in table salt
manufacturing and inhibiting agglomeration of
the vanilla powder, spice mixes and in many
food powder form production are used as
additives anti-caking.
 MAGNESIUM SULFATE
MONOHYDRATE

GENERAL
DEFINITIONS
CAS 14168 – 73 – 1
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Inorganic salt
CATEGORY
TRADE Magnesium sulfate monohydrate
NAME

CHEMICAL
PROPERTIES
CHEMICAL MgSO4.H2O
FORMULA
MOLECULAR 138.38 g / mole
WEIGHT

MELTING 150
POINT ( C )
BOILING Not specified
POINT ( C )
PH Not specified
RANGE
DENSITY 1.670 g / cm3
SOLUBILITY Soluble in water.
470
 MAGNESIUM SULFATE
MONOHYDRATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Magnesium sulphate monohydrate, known for

its food code E 518 , with MgSO4.H2O
chemical formula and 138.38 g / mole
molecular weight of the white, odorless and
APPLICATIONS which is a raw material in powder form.

Magnesium sulphate monohydrate is quite a

raw material used in the industrial field and in
the food industry, it has endurance-enhancing
properties of nutritional supplements and
canned.
 MENTHOL

GENERAL
DEFINITIONS
CAS 2216 – 51 – 5
NUMBER
GENERAL Cosmetic and medicine ingredient
CATEGORY
FACTORIAL Mint oil
CATEGORY
TRADE Menthol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C10H20O
FORMULA
MOLECULAR 156.30 g / mole
WEIGHT

MELTING 42
POINT ( C )
BOILING 212
POINT ( C )
PH Not specified
RANGE
DENSITY 0.890 g / cm3
SOLUBILITY Slightly soluble in water. Soluble in gycerine
and monopropylene glycol.
472
 MENTHOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR A characteristic mint odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Levomenthol is a levo isomer of menthol, an

organic compound made synthetically or
obtained from peppermint or mint oils with
APPLICATIONS flavoring and local anesthetic properties.

When added to pharmaceuticals and

foods,menthol functions as a fortifier for
peppermint flavors. It also has a
counterirritant effect on skin and mucous
membranes, thereby producing a local
analgesic or anesthetic effect.
 METHYLISOTHIAZOLINONE

GENERAL
DEFINITIONS
CAS 12672 – 54 – 3
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Protective agent
CATEGORY
TRADE Methylisothiazolinone
NAME

CHEMICAL
PROPERTIES
CHEMICAL C4H5NOS.HCL
FORMULA
MOLECULAR 151.56 g / mole
WEIGHT

MELTING 48
POINT ( C )
BOILING 93
POINT ( C )
PH Not specified
RANGE
DENSITY 1.020 g / cm3
SOLUBILITY Soluble in water
474
 METHYLISOTHIAZOLINONE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Methylisothiazolinone, density 1.020 g / cm 3

with powder or crystalline form, is a solid raw
material in white.
APPLICATIONS
Methylisothiazolinone, cosmetics and fairly
used in the industrial sector. Antibacterial,
that are used as preservatives. Generally, all
cosmetic products and especially in the
production of shampoo, the solution used in
the production of wet wipes and the skin care
lotions and creams.
 METHYL
ALCOHOL

GENERAL
DEFINITIONS
CAS 67 – 56 – 1
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Solvent
CATEGORY
TRADE Methyl alcohol
NAME

CHEMICAL
PROPERTIES
CHEMICAL CH3OH
FORMULA
MOLECULAR 32.04 g / mole
WEIGHT

MELTING -97.5
POINT ( C )
BOILING 64.5
POINT ( C )
PH Not specified
RANGE
DENSITY 0.795 g / cm3
SOLUBILITY Soluble in water
476
 METHYL
ALCOHOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic alcohol odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Methyl alcohol, It has a peculiar odor in liquid

form, a transparent and colorless character is
an organic solvent raw material. A poisonous
APPLICATIONS alcohol.

Methyl Alcohol, including in particular

detergent, industrial products and solvents
used as raw materials in some help.
Generally, due to its low freezing point, used
as anti-icing and ice cold pile in relief.
 METHYL
BENZOATE

GENERAL
DEFINITIONS
CAS 93 – 58 – 3
NUMBER
GENERAL Industrial and food ingredient
CATEGORY
FACTORIAL Ester agent
CATEGORY
TRADE Methyl benzoate
NAME

CHEMICAL
PROPERTIES
CHEMICAL C8H8O2
FORMULA
MOLECULAR 136.14 g / mole
WEIGHT

MELTING -13.5
POINT ( C )
BOILING 199
POINT ( C )
PH Not specified
RANGE
DENSITY 1.095 g / cm3
SOLUBILITY Partially soluble in water
478
 METHYL
BENZOATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and light yellow
ODOR A characteristic aodor.
AID It causes an irritation slightly. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Methyl benzoate, grape, a liquid synthetic

molecule used in the production of fragrances
such as phenol and camphor. cosmetic and
APPLICATIONS detergent field and especially in personal care
products used as a basis for fragrances in
cosmetics.

In the food industry it is used as an aid in

some flavor.
 METHYL ETHYL
KETONE

GENERAL
DEFINITIONS
CAS 78 – 93 – 3
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Solvent
CATEGORY
TRADE Methyl ethyl ketone
NAME

CHEMICAL
PROPERTIES
CHEMICAL C4H8O
FORMULA
MOLECULAR 72.11 g / mole
WEIGHT

MELTING -86
POINT ( C )
BOILING 78.6
POINT ( C )
PH Not specified
RANGE
DENSITY 0.805 g / cm3
SOLUBILITY Partially soluble in water
480
 METHYL ETHYL
KETONE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic odor.
AID It causes an irritation slightly. In contact, wash
MEASURES plenty of water.
STORAGE
Keep cool and dry place

Methyl ethyl ketone, ketone-type active

organic solvents. Phenolic alkyd, in systems
APPLICATIONS containing vinyl resin in cellulosic system;
used in paint removers and adhesives.

It also has a professional cleaning and

maintenance products for use in the food and
beverage industry. Food is used as a carrier
in food flavorings used in industry.
 METHYL
PARABEN

GENERAL
DEFINITIONS
CAS 99 – 76 – 3
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Preservative agent
CATEGORY
TRADE Methyl paraben
NAME

CHEMICAL
PROPERTIES
CHEMICAL C4H8O3
FORMULA
MOLECULAR 152.15 g / mole
WEIGHT

MELTING 131
POINT ( C )
BOILING 270
POINT ( C )
PH Not specified
RANGE
DENSITY 0.910 g / cm3
SOLUBILITY Soluble in water
482
 METHYL
PARABEN

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

A preservative in the cosmetic industry is

quite used. Although recently banned their
APPLICATIONS usage in Europe and America are going to
use me in some countries.

In particular, skin care products, used in hair

care products and color cosmetics. It will
have the opportunity to use periods in the
detergent industry.
 MONOETHANOLAMINE
MEA

GENERAL
DEFINITIONS
CAS 141 – 43 – 5
NUMBER
GENERAL Industrial detergent ingredient
CATEGORY
FACTORIAL Amino alcohol group
CATEGORY
TRADE Monoethanolamine MEA
NAME

CHEMICAL
PROPERTIES
CHEMICAL C2H7NO
FORMULA
MOLECULAR 61.08 g / mole
WEIGHT

MELTING 10.3
POINT ( C )
BOILING 170
POINT ( C )
PH 10
RANGE
DENSITY 1.012 g / cm3
SOLUBILITY Soluble in water
484
 MONOETHANOLAMINE
MEA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and light yellow
ODOR A characteristic odor.
AID It causes an irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Monoethanolamine (MEA), with its distinctive

odor, viscous liquid form, transparent,
colorless or slightly yellow color is a raw
material.
APPLICATIONS Monoethanolamine (MEA), the pH adjustment
in many industrial products, especially
detergents and cleaning. Especially in the
production of liquid detergent used in many oil
and dirt solve solve formulas. It is also used in
some chemical raw materials into a water-
based solvent products in the agricultural
sector.
 MONOETHYENE
GLYCOL

GENERAL
DEFINITIONS
CAS 107 – 21 - 1
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Antifreeze agent
CATEGORY
TRADE Monoethylene glycol ( meg )
NAME

CHEMICAL
PROPERTIES
CHEMICAL C2H6O2
FORMULA
MOLECULAR 62 g / mole
WEIGHT

MELTING -12
POINT ( C )
BOILING 197
POINT ( C )
FLASH 111
POINT ( C )
DENSITY 1.120 g / cm3
SOLUBILITY Soluble in water
486
 MONOETHYLENE
GLYCOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place

Monoethylene glycol, which has its own

smell, transparent and colorless, slightly
viscous liquid is a raw form.
APPLICATIONS
Monoethylene glycol, automotive glass of
water in the detergent industry, and especially
car care products used as raw materials for
production for the production of antifreeze
and cars. Moreover, this raw material is used
in many industrial fields.
 MONOPROPYLENE
GLYCOL

GENERAL
DEFINITIONS
CAS 57 – 55 - 6
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Skin moisture agent
CATEGORY
TRADE Monopropylene glycol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C3H8O2
FORMULA
MOLECULAR 76.09 g / mole
WEIGHT

MELTING Not specified

POINT ( C )
BOILING 185
POINT ( C )
FLASH 104
POINT ( C )
DENSITY 1.030 g / cm3
SOLUBILITY Soluble in water
488
 MONOPROPYLENE
GLYCOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR Odorless
AID It causes no irritation. In contact, wash plenty
MEASURES of water.
STORAGE
Keep cool and dry place
Monopropylene glycol, are widely use in the
formulation of the bakery product. Aromas
and essences in the industry, medicine, and
is used in cosmetics. (In the form of technical
quality, it is an important material for
polyurethane plastics and polyester resins. In
the tobacco industry, is also used in the food
APPLICATIONS industry for the lubrication of machine
freezer).
Mouth washer (mouthwash), tooth pastes,
ointments, skin creams, shampoos and
perfumes (too much even when diluted with
water solutions containing propylene glycol
usually remains clear) Emulsion formation as
a preservative in cosmetics, Fragrances
(essences) as a solvent for,as an extract in
active agent to obtain extracts from natural
sources, as a lubricant (eg for machinery
used in the cosmetics industry) it is used.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

N
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 NITRIC
ACID

GENERAL
DEFINITIONS
CAS 7697 – 37 – 2
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Strong acid
CATEGORY
TRADE Nitric acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL HNO3
FORMULA
MOLECULAR 63.01 g / mole
WEIGHT

MELTING -42
POINT ( C )
BOILING 83
POINT ( C )
PH 1
RANGE
DENSITY 1.510 g / cm3
SOLUBILITY Soluble in water
490
 NITRIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR Odorless
AID It causes an irritation.
MEASURES
STORAGE
Keep cool and dry place

Nitric Acid is available in many areas of

opportunity for industrial use. Among the
major sectors, the paper industry, metal
APPLICATIONS industry, textile industry and refinements can
be counted.

Nitric Acid, also in the production of fertilizers,

explosives, also used in the pH adjustment
and electro-polishing works.
 NONYLPHENOL ETHOXYLATE
NP 6

GENERAL
DEFINITIONS
CAS 127087 – 87 – 0
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Nonionic agent
CATEGORY
TRADE Nonylphenol ethoxylate ( NP: 6 )
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING -8
POINT ( C )
BOILING 293
POINT ( C )
PH 6–7
RANGE
DENSITY 1.060 g / cm3
SOLUBILITY Soluble in water
492
 NONYLPHENOL ETHOXYLATE
NP: 6

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and colorless
ODOR A characteristic odor
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

Nonylphenol ethoxylate (NP: 6), transparent,

colorless and form liquid is a raw material
with a distinctive odor.
APPLICATIONS

Nonylphenol ethoxylate (NP: 6), are used as

nonionic surface active in all cleaning jobs.
Good emulsifier, detergent industry, textile,
car care products and many more are used
as industrial cleaners and emulsifiers.
 NONYLPHENOL ETHOXYLATE
NP 10

GENERAL
DEFINITIONS
CAS 127087 – 87 – 0
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Nonionic agent
CATEGORY
TRADE Nonylphenol ethoxylate ( NP: 10 )
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING -8
POINT ( C )
BOILING 293
POINT ( C )
PH 6–7
RANGE
DENSITY 1.060 g / cm3
SOLUBILITY Soluble in water
494
 NONYLPHENOL ETHOXYLATE
NP: 10

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and colorless
ODOR A characteristic odor
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

Nonylphenol ethoxylate (NP: 10),

transparent, colorless and form liquid is a raw
material with a distinctive odor.
APPLICATIONS

Nonylphenol ethoxylate (NP: 10), are used

as nonionic surface active in all cleaning jobs.
Good emulsifier, detergent industry, textile,
car care products and many more are used
as industrial cleaners and emulsifiers.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

O
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 OCTYLDODECANOL

GENERAL
DEFINITIONS
CAS 5333 – 42 – 6
NUMBER
GENERAL Industrial and cosmetic ingredient
CATEGORY
FACTORIAL Skin emollient agent
CATEGORY
TRADE Octyldodecanol
NAME

CHEMICAL
PROPERTIES
CHEMICAL C20H42O
FORMULA
MOLECULAR 298.56
WEIGHT

MELTING -23
POINT ( C )
BOILING 223
POINT ( C )
FLASH 188
POINT ( C )
DENSITY 0.840 g / cm3
SOLUBILITY Insoluble in water
496
 OCTYLDODECANOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Clear and colorless
ODOR A characteristic odor
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

Octyldodecanol a density of 0.840 g / cm 3,

which, in the form of viscous liquid,
APPLICATIONS transparent and light yellow liquid with a
characteristic odor and is a raw material.

Octyldodecanol, cosmetics and fairly used in

the industrial sector. Emollient and
moisturizing. Usually it is seen in quite used
as hand and face creams and lotions.
 OLEIC
ACID

GENERAL
DEFINITIONS
CAS 112 – 80 – 1
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Fatty acid
CATEGORY
TRADE Oleic acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL C18H34O2
FORMULA
MOLECULAR 282.47 g / mole
WEIGHT

MELTING 17
POINT ( C )
BOILING 286
POINT ( C )
FLASH Not specified
POINT ( C )
DENSITY 0.840 g / cm3
SOLUBILITY Insoluble in water. Soluble in methyl alcohol
498
 OLEIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid oily.
COLOR Clear and colorless
ODOR A characteristic oily odor.
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

APPLICATIONS Oleic acid is used as raw material for

producing soap. Textile and leather also help
in the detergent manufacturing, ink
manufacturing, amine as a lubricant agent is
used in ceramics and paper industry
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

P
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 PEA
GREEN

GENERAL
DEFINITIONS
CAS 2353 – 45 – 9
NUMBER
GENERAL Industrial dye
CATEGORY
FACTORIAL Food color
CATEGORY
TRADE Pea green color
NAME

CHEMICAL
PROPERTIES
CHEMICAL C37H34N2Na2O10S2
FORMULA
MOLECULAR 582.66
WEIGHT

MELTING Not specified

POINT ( C )
PH 5–6
RANGE
FLASH Not specified
POINT ( C )
DENSITY 0.80 g / cm3
SOLUBILITY Soluble in water
500
 PEA
GREEN

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR Red
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place
Food coloring GREEN PEAR class food in
which synthetic food dyes allowed in the
codex products are used in limited amounts.
Ice cream production, icy drinks, necessary in
sodas, fruit soda is used in production.
Also in the production of confectionery
products, jellies, flavored drinks, chewing gum
APPLICATIONS varieties in sugar and low-sugar, bakery
products, confectionery etc. it is used in many
food production.
Food except pharmaceuticals, cosmetics,
detergent products, car care products, in a
small amount of agricultural products,
cleaning products, colored stones, play
dough, etc. are also used for coloring many
people in contact with the product.

GREEN PEA gives bright green color and is

soluble in water.
 PEG 400
POLYETHYLENE GLYCOL

GENERAL
DEFINITIONS
CAS 25322 – 68 – 3
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Solvent and plasticizer agent
CATEGORY
TRADE Peg 400 polyethylene glycol
NAME

CHEMICAL
PROPERTIES
CHEMICAL Not specified
FORMULA
MOLECULAR Not specified
WEIGHT

MELTING 8
POINT ( C )
PH 4.5 – 7.5
RANGE
FLASH 238
POINT ( C )
DENSITY 1.125 g / cm3
SOLUBILITY Soluble in water
502
 PEG 400
POLYETHYENE GLYCOL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

PEG 400, density 1.125 g / cm3, liquid form,

is a solid raw material which is transparent
APPLICATIONS and colorless and characteristic odor.

PEG 400, cosmetics, detergents and fairly

used in the industrial sector. Nonionic
characteristic, cleaning solvent is used as
thickener and emulsifier.
 PEG 40
HYDROGENATED CASTOR OIL

GENERAL
DEFINITIONS
CAS 61788 – 85 – 0
NUMBER
GENERAL Cosmetic and detergent ingredient
CATEGORY
FACTORIAL emulsifier
CATEGORY
TRADE Peg 40 hydrogenated castor oil
NAME

CHEMICAL
PROPERTIES
CHEMICAL Not specified
FORMULA
MOLECULAR Not specified
WEIGHT

MELTING Not specified

POINT ( C )
PH 6–7
RANGE
FLASH 170
POINT ( C )
DENSITY 1.125 g / cm3
SOLUBILITY Soluble in water
504
 PEG 40
HYDROGENATED CASTOR OIL

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Yellow or brown
ODOR A characterisitic odor.
AID It causes an irritation slightly.
MEASURES
STORAGE
Keep cool and dry place

PEG 40 Hydrogenated Castor Oil, with its

own peculiar smell, it is a solid cake or oily
ingredient.
APPLICATIONS

PEG 40 Hydrogenated Castor Oil, in many

industrial products, especially detergents and
emulsifiers used in particular in the oil to
emulsify.
 PEG 40
STEARATE

GENERAL
DEFINITIONS
CAS 9004 – 99 – 3
NUMBER
GENERAL Cosmetic and detergent ingredient
CATEGORY
FACTORIAL emulsifier
CATEGORY
TRADE Polyoxyethylene ( 40 ) stearate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Not specified
FORMULA
MOLECULAR Not specified
WEIGHT

MELTING 35 – 40
POINT ( C )
BOILING 212
POINT ( C )
FLASH 268
POINT ( C )
DENSITY 1.07 g / cm3
SOLUBILITY Soluble in water
506
 PEG 40
STEARATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or granul
COLOR White or white off
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

PEG 40 Stearate, density 1.070 g / cm 3

which the solid fat form, it is a white oily solid,
and has a characteristic smell of ingredient.
APPLICATIONS

PEG 40 Stearate, quite cosmetic and

industrial sectors. Good emulsifier. To this
end, hair care products, hair şeklillendiric in
the production of products used in the hand
and facial creams and lotions.
 PEG 75
ETOXYLATED LANOLIN

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Cosmetic ingredient
CATEGORY
FACTORIAL Emulsifier and wetting agent
CATEGORY
TRADE Peg 75 Etoxylated lanolin
NAME

CHEMICAL
PROPERTIES
CHEMICAL Not specified
FORMULA
MOLECULAR Not specified
WEIGHT

PH 3.5 – 8
RANGE
BOILING Not specified
POINT ( C )
FLASH Not specified
POINT ( C )
DENSITY 1.10 g / cm3
SOLUBILITY Partially soluble in water
508
 PEG 75
ETOXYLATED LANOLIN

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Yellow or amber
ODOR A characteristic odor.
AID It causes an irritation slightly.
MEASURES
STORAGE
Keep cool and dry place

It can be used in clear liquid cosmetics and

toiletries where viscosity must be controlled,
such as in aftershaves and cleansing lotions.
It minimises the defatting effect of detergents
APPLICATIONS on skin and hair without impairing their
cleansing ability.

Ethoxylated lanolin derivatives are potent

solubilisers of insoluble materials such as
lanolin, lanolin oil and hydrocarbons. It is also
used in stable low-viscosity micro emulsions
of insoluble pharmacological compounds for
spraying onto wounds or burns.
 PHOSPHORIC
ACID

GENERAL
DEFINITIONS
CAS 7664 – 38 – 2 + 7732 – 18 – 5
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Inorganic acid
CATEGORY
TRADE Phosphoric acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL H3PO4
FORMULA
MOLECULAR Mixture
WEIGHT

PH Acidic
RANGE
BOILING 158
POINT ( C )
MELTING 21
POINT ( C )
DENSITY 1.10 g / cm3
SOLUBILITY Soluble in water completely.
510
 PHOSPHORIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless and clear
ODOR Odorless
AID It causes an irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place

Phosphoric acid, also known as

orthophosphoric acid, is one of the most
widely known and used acids. It is a mineral
acid that contains three atoms of hydrogen,
one atom of phosphorus, and four atoms of
oxygen.
APPLICATIONS

Thus, the chemical formula of phosphoric

acid is H3PO4. This is an important acid
which has a wide range of uses. In the
following sections, we will find out what all
phosphoric acid is used for.
 POLYSORBATE
20

GENERAL
DEFINITIONS
CAS 9005 – 64 – 5
NUMBER
GENERAL Detergent, food and cosmetic ingredient
CATEGORY
FACTORIAL Emulsifier
CATEGORY
TRADE Polysorbate 20
NAME

CHEMICAL
PROPERTIES
CHEMICAL C58H114O26
FORMULA
MOLECULAR 1227.77
WEIGHT

PH Not specified
RANGE
BOILING 100
POINT ( C )
MELTING Not specified
POINT ( C )
DENSITY 1.10 g / cm3
SOLUBILITY Soluble in water.
512
 POLYSORBATE
20

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Yellow
ODOR A characteristic odor.
AID It causes no irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place

Polysorbate 20, cosmetic, especially food

industry is used as a detergent and emulsifier
in many industrial fields.
APPLICATIONS
Polysorbate 20, as in all the emulsifier, the
water phase or the oil forming the oil phase
and the water are emulsified additives in
providing these products. in food,
mayonnaise, sauces, oils in the cream, the
flavors, and beer fikset as used in different
proportions in the production of products such
as malt.
 POLYQUATERNIUM
7

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Detergent and cosmetic ingredient
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Polyquaternium 7
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

PH Not specified
RANGE
BOILING 100
POINT ( C )
MELTING Not specified
POINT ( C )
DENSITY 1.02 g / cm3
SOLUBILITY Soluble in water.
514
 POLYQUATERNIUM
7

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Viscous liquid
COLOR Yellow
ODOR Odorless.
AID It causes no irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place

Polyquaternium-7 is a clear, colorless to

pale yellow liquid. In cosmetics and personal
care products, it is used in a wide variety of
products including shampoos, hair
conditioners and other hair products, bath
APPLICATIONS soaps and cleansing products.

Polyquaternium-7 prevents or inhibits the

buildup of static electricity and dries to form a
thin coating that is absorbed onto the hair
shaft. Polyquaternium-7 also helps hair hold
its style by inhibiting the hair's ability to
absorb moisture.
 POTASSIUM
ACETATE

GENERAL
DEFINITIONS
CAS 127 – 8 - 2
NUMBER
GENERAL Food ingredient
CATEGORY
FACTORIAL Potassium acetate salt
CATEGORY
TRADE Potassium acetate
NAME

CHEMICAL
PROPERTIES
CHEMICAL C2H3KO2
FORMULA
MOLECULAR 98.14
WEIGHT

PH 7–9
RANGE
BOILING Not specified
POINT ( C )
MELTING 292
POINT ( C )
DENSITY 1.60 g / cm3
SOLUBILITY Partially soluble in water.
516
 POTASSIUM
ACETATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless.
AID It causes no irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place

Potassium acetate is a food preservative

which is a white crystalline color and slight
characteristic odor. Potassium acetate is
known in the food industry with E 261 food
code. PH range of 7-9 and having a melting
APPLICATIONS point of 292 C., which is a water-soluble food
preservatives comfortable.

Potassium acetate, is used as a food

preservative as well as an acidity regulator.

Potassium acetate is also used in antifreeze

and de-icing agent in detergent and industrial
areas.
 POTASSIUM
HYDROXIDE

GENERAL
DEFINITIONS
CAS 1310 – 58 – 3
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Caustic potash
CATEGORY
TRADE Potassium hydroxide
NAME

CHEMICAL
PROPERTIES
CHEMICAL KOH
FORMULA
MOLECULAR 56.11
WEIGHT

PH 13
RANGE
BOILING 1384
POINT ( C )
MELTING 380
POINT ( C )
DENSITY 2.050 g / cm3
SOLUBILITY Soluble in water.
518
 POTASSIUM
HYDROXIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal or payet
COLOR White
ODOR Odorless.
AID It causes an irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place
Potassium hydroxide, chemical
compound with formula KOH. Pure
potassium hydroxide forms white,
deliquescent crystals. For commercial
and laboratory use it is usually in the
form of white pellets. A strong base, it
APPLICATIONS dissolves readily in water, giving off
much heat and forming a strongly
alkaline, caustic solution It is commonly
called caustic potash. It closely
resembles sodium hydroxide in its
chemical properties and has similar
uses, e.g., in making soap, in bleaching,
and in manufacturing chemicals, but is
less widely used because of its higher
cost.
 POTASSIUM
CHLORIDE

GENERAL
DEFINITIONS
CAS 7447 – 40 – 7
NUMBER
GENERAL Industrial ingredient
CATEGORY
FACTORIAL Potassium salt
CATEGORY
TRADE Potassium chloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL KCI
FORMULA
MOLECULAR 74.55
WEIGHT

PH Not specified
RANGE
BOILING 1420
POINT ( C )
MELTING 770
POINT ( C )
DENSITY 1.98 g / cm3
SOLUBILITY Soluble in water.
520
 POTASSIUM
CHLORIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal or powder
COLOR White
ODOR Odorless.
AID It causes an irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place
Drilling water-based drilling mud potassium
chloride at-drilling, used as stabilizers. It can
also be used in oil production.
Electrolysis coating: the acid bath, when
provided with high voltage potassium
chloride, can be done in less time than
coating.
APPLICATIONS Azo / textile paint on; potassium chloride is
used together with sulfonic acids.
Heat treatment: Soldering / for blasting and
surface treatment materials that can not be
used, heat treatment processes (especially
aluminum sheet)
In metallurgy: surface treatment,
galvanizing, casting, smelting used.
Furthermore, aluminum waste potassium
chloride and sodium chloride (salt) is
dissolved using so unnecessary waste
removed. Aluminum waste becomes high in
quality as a result.
 POTASSIUM
CHLORIDE

GENERAL
DEFINITIONS
CAS 7778 – 80 – 5
NUMBER
GENERAL Industrial and agriculture ingredient
CATEGORY
E FOOD E 515
CODE
TRADE Potassium sulfate
NAME

CHEMICAL
PROPERTIES
CHEMICAL K2SO4
FORMULA
MOLECULAR 174.25
WEIGHT

PH 13 – 13.5
RANGE
BOILING 1689
POINT ( C )
MELTING 1067
POINT ( C )
DENSITY 2.66 g / cm3
SOLUBILITY Partially soluble in water.
522
 POTASSIUM
SULFATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless.
AID It causes no irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place

Potassium Sulphate, most potatoes, tobacco,

vegetables, fruit, citrus fruits, beans, corn,
cotton, sugar beet and used in greenhouses.
the leaves of the plant is not given enough
potassium sulfate yellow or reddish brown
spots appear. In irrigated agriculture and in
APPLICATIONS rainy regions are common to potassium
deficiency.

poor in organic matter, potassium sulfate

should be given the sandy soil. Acid is
featured for many years in the soil acidity
increases if used continuously. When used in
the acid soil to be administered in an amount
of lime to the soil. Also meets the needs of
sulfur within the plant is found in sulfur.
 POTASSIUM
TRIPOLYPHOSPHATE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Industrial and detergent ingredient
CATEGORY
FACTORIAL Sequestering
CATEGORY
TRADE Potassium tripolyphosphate ( liquid )
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

PH 9 - 10
RANGE
BOILING 1689
POINT ( C )
MELTING 630
POINT ( C )
DENSITY 1.10 g / cm3
SOLUBILITY Soluble in water.
524
 POTASSIUM
TRIPOLYPHOSPHATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless and clear
ODOR Odorless.
AID It causes an irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place

Potassium tripolyphosphate, no odor is a

material transparent and colorless liquid.
APPLICATIONS

Potassium tripolyphosphate, including in

particular detergent, ions are used as raw
materials in industrial cleaning helps holder
and many other areas. It also finds use in the
field because of the water softening
properties.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

s
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 SODIUM
ALPHA OLEFIN SULFONATE

GENERAL
DEFINITIONS
CAS 68439 – 57 – 6 + 7732 – 18 – 5
NUMBER
GENERAL Detergent and cosmetic ingredients
CATEGORY
FACTORIAL Surfactant
CATEGORY
TRADE Sodium alpha olefin sulfonate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING Not specified

POINT ( C )
PH 5–6
RANGE
BOILING 100
POINT ( C )
DENSITY 0.85 g / cm3
SOLUBILITY Soluble in water
526
 SODIUM
ALPHA OLEFIN SULFONATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and colorless
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

Sodium alpha olefin sulfonate, yellow, light

dense form and has a smell that its liquid
APPLICATIONS anionic surfactant is a ingredient.

Sodium alpha olefin sulfonate, foaming and

cleaning power than that of a surfactant find
use in many cosmetic and detergent
products. Also gets a stable foam is a highly
effective ingredient.
 SODIUM
HEGZAMETAPHOSPHATE

GENERAL
DEFINITIONS
CAS 10124 – 56 – 8
NUMBER
GENERAL Detergent and industrial ingredients
CATEGORY
FACTORIAL sequestering
CATEGORY
TRADE Sodium hegzametaphosphate ( SHMP )
NAME

CHEMICAL
PROPERTIES
CHEMICAL Na6P6O18
FORMULA
MOLECULAR 611.77
WEIGHT

MELTING 628
POINT ( C )
PH Not specified
RANGE
BOILING 1500
POINT ( C )
DENSITY 2.48 g / cm3
SOLUBILITY Soluble in water
528
 SODIUM
HEGZAMETAPHOSPHATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal or powder
COLOR White
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

SHMP, powder or granular form and does not

APPLICATIONS smell, is a solid raw material in white.

SHMP, including in particular detergent, ions

are used as raw materials in industrial
cleaning helps holder and many other areas.
It also finds use in the field because of the
water softening properties.
 SODIUM
HYDROXIDE

GENERAL
DEFINITIONS
CAS 1310 – 73 – 2
NUMBER
GENERAL Detergent and industrial ingredients
CATEGORY
FACTORIAL Strong alkaline
CATEGORY
TRADE Sodium hydroxide
NAME

CHEMICAL
PROPERTIES
CHEMICAL NaOH
FORMULA
MOLECULAR 39.99
WEIGHT

MELTING 318
POINT ( C )
PH 14
RANGE
BOILING 1390
POINT ( C )
DENSITY 2.100 g / cm3
SOLUBILITY Soluble in water
530
 SODIUM
HYDROXIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Payet
COLOR White
ODOR Odorless
AID It causes an irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place

Sodium hydroxide, sequins and beads in the

form of a solid, odorless and white in an
alkaline materials.
APPLICATIONS

Sodium hydroxide, including in particular

detergent, paper industry, textile, chemical,
used in car maintenance products and pool
chemicals. usually uses in adjusting pH is
alkaline product is quite a lot.
 SODIUM
HYPOCHLORIDE

GENERAL
DEFINITIONS
CAS Mixture
NUMBER
GENERAL Detergent and industrial ingredients
CATEGORY
FACTORIAL Bleaching agent
CATEGORY
TRADE Sodium hypochloride
NAME

CHEMICAL
PROPERTIES
CHEMICAL NaOCI
FORMULA
MOLECULAR 74.44
WEIGHT

MELTING -25
POINT ( C )
PH 11
RANGE
BOILING 111
POINT ( C )
DENSITY 1.10 g / cm3
SOLUBILITY Soluble in water
532
 SODIUM
HYPOCHLORIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Clear and yellow slightly
ODOR A characteristic chlorine odor
AID It causes an irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place

Sodium hypochlorite, offers on-site chlorine

and chlorine odor judge this reason, it is a
ingredient in the form of liquid, transparent
APPLICATIONS and pale yellow.

Sodium Hypochlorite, to get detergent

primarily due to chlorine bleach and most
active feature in production, paper industry,
textile and used in many industrial fields as
chlorine bleach.
 SODIUM
CARBONATE

GENERAL
DEFINITIONS
CAS 497 – 19 – 8
NUMBER
GENERAL Detergent and industrial ingredients
CATEGORY
FACTORIAL Strong base agent
CATEGORY
TRADE Sodium carbonate
NAME

CHEMICAL
PROPERTIES
CHEMICAL NaCO3
FORMULA
MOLECULAR 105.99
WEIGHT

MELTING 851
POINT ( C )
PH 11 – 12
RANGE
BOILING Not specified
POINT ( C )
DENSITY 2.54 g / cm3
SOLUBILITY Soluble in water
534
 SODIUM
CARBONATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes an irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place
Especially for the bleaching of linen cloth.
Sodium carbonate ions into carbonate
hardness that water away from the
precipitating environment. In this way it is
used as softener in the washing machine.
The most important chemical used in glass
production. Soda Blasting is raised to very
APPLICATIONS high combined heat and cooled suddenly and
glass is produced.

The reactive dyes used in the textile industry

are used to create the bond between dye and
fiber, sodium carbonate. Food additive as
acidity regulators, anti-caking agent and acts
as stabilizer. Sherbet powder used in the
production. Acts as a wetting agent in brick-
making, in this way the need for less water
while the extruded clay.
 SODIUM
LAURYL ETHER SULFATE

GENERAL
DEFINITIONS
CAS 68585 – 34 – 2 + 7732 – 18 – 5
NUMBER
GENERAL Detergent and cosmetic ingredients
CATEGORY
FACTORIAL Anionic surfactant
CATEGORY
TRADE SLES
NAME

CHEMICAL
PROPERTIES
CHEMICAL Mixture
FORMULA
MOLECULAR Mixture
WEIGHT

MELTING 10 – 15
POINT ( C )
PH 7 – 7.5
RANGE
BOILING Not specified
POINT ( C )
DENSITY 1.05 g / cm3
SOLUBILITY Soluble in water
536
 SODIUM
LAURYL ETHER SULFATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Gel
COLOR Colorless pale yellow
ODOR A characteristic odor.
AID It causes an irritation slightly. In contact, wash
MEASURES more water.
STORAGE
Keep cool and dry place

Especially SLES detergent, shampoo,

cosmetics, and in particular production, it
finds application in the production of highly
shower gel. Anionic surface-active agent in
APPLICATIONS auto care products to be used for both the
cleaning active as foaming agent.

SLES, including in the textile and adhesives

industries, the construction of drilling foam,
foam concrete production and used in many
industrial fields.
 SODIUM
LAURYL SULFATE

GENERAL
DEFINITIONS
CAS 151 – 21 – 3
NUMBER
GENERAL Detergent and cosmetic ingredients
CATEGORY
FACTORIAL Anionic surfactant
CATEGORY
TRADE SLS
NAME

CHEMICAL
PROPERTIES
CHEMICAL CH3(CH2)10CH2OOSOONa
FORMULA
MOLECULAR 288.38
WEIGHT

MELTING 204
POINT ( C )
PH 6–7
RANGE
BOILING Not specified
POINT ( C )
DENSITY 1.050 g / cm3
SOLUBILITY Soluble in water
538
 SODIUM
LAURYL SULFATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR A characteristic odor
AID It causes no irritation
MEASURES
STORAGE
Keep cool and dry place

Sodium lauryl sulfate (SLS), the solid form is

an anionic surfactant with a distinctive odor.
APPLICATIONS

Sodium lauryl ether sulphate (SLS), including

especially cosmetics, detergents and cleaning
products such as foam and is used in many
car care products. both active in terms of
being solid to the fore feature both high and
foam.
 SODIUM
METASILICATE

GENERAL
DEFINITIONS
CAS 6834 – 92 – 0
NUMBER
GENERAL Industrial ingredients
CATEGORY
FACTORIAL Builder agent
CATEGORY
TRADE Sodium metasilicate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Na2O3Si
FORMULA
MOLECULAR 122.06
WEIGHT

MELTING 1090
POINT ( C )
PH 12 – 13
RANGE
BOILING Not specified
POINT ( C )
DENSITY 2.61 g / cm3
SOLUBILITY Soluble in water
540
 SODIUM
METASILICATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes an irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place
Sodium metasilicate is not a cleaning agent by
itself. It is a VERY strong base. The pH of a 1%
aqueous solution is about 13. In moist air it is
corrosive to metals like zinc, aluminium, tin and
lead, forming hydrogen gas. As a strong base,
it reacts violently with acids. A major use is as a
builder (a material that enhances or maintains
APPLICATIONS the cleaning efficiency of a surfactant,
principally by inactivating water hardness) in
soaps and detergents.

It may be used as part of a component in a

chemical degreaser, where it would react with
fatty acids(animal grease) to form a soap,
which is then rinsed away.

Sodium silicate, on the other hand, is an

abrasive white powder frequently used in things
like toothpaste. It doesn't clean by itself either.
 SODIUM
PERCARBONATE

GENERAL
DEFINITIONS
CAS 15630 – 89 – 4
NUMBER
GENERAL Industrial ingredients
CATEGORY
FACTORIAL Oxygene bleaching agent.
CATEGORY
TRADE Sodium percarbonate
NAME

CHEMICAL
PROPERTIES
CHEMICAL CNa2O3 · 1.5H2O2
FORMULA
MOLECULAR 157.01
WEIGHT

MELTING Not specified

POINT ( C )
PH 10 – 11
RANGE
BOILING Not specified
POINT ( C )
DENSITY 0.95 g / cm3
SOLUBILITY Soluble in water
542
 SODIUM
PERCARBONATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or granular
COLOR White
ODOR Odorless
AID It causes an irritation. In contact, wash more
MEASURES water.
STORAGE
Keep cool and dry place

Sodium percarbonate is a white crystalline or

APPLICATIONS granular raw material form that does not smell.

Sodium percarbonate is used as the main raw

material in the production of filler in the powder
detergent and bleach products. As bleaching
paper and textile industry also finds the use of
space.
 SODIUM
SULFATE

GENERAL
DEFINITIONS
CAS 7757 – 82 – 6
NUMBER
GENERAL Industrial ingredients
CATEGORY
FACTORIAL Oxidizing or reducing agents
CATEGORY
TRADE Sodium sulfate
NAME

CHEMICAL
PROPERTIES
CHEMICAL Na2SO4
FORMULA
MOLECULAR 142.04
WEIGHT

MELTING 880
POINT ( C )
PH 7–8
RANGE
BOILING 1100
POINT ( C )
DENSITY 2.670 g / cm3
SOLUBILITY Soluble in water
544
 SODIUM
SULFATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or granular
COLOR White
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

Sodium sulphate, is the most important use of

the detergent industry is. Sodium sulfate, is
included as filler in the formulation of powder
and granular solid detergent. Detergents
contain an average of about 16% sodium
APPLICATIONS sulfate, but this rate is up to 40'y% in some
formulas. Sodium sulfate used in the
production rate of the detergent, affects the
cost of the detergent and bleaching degrees.
Natural sodium sulfate has an ideal filling
function does not mold is inert and inexpensive.
Diluents and provides good flow
characteristics, colloidal properties of the
cleaned soil will increase the effectiveness of
detergent making stable. It also allows the
realization of the best washing up the micelles
by reducing the power of the critical
concentration.
 SODIUM
TRIPOLYPHOSPHATE

GENERAL
DEFINITIONS
CAS 7758 – 29 – 4
NUMBER
GENERAL Industrial detergent ingredients
CATEGORY
FACTORIAL sequestrant and anticoagulant agent
CATEGORY
TRADE Sodium tripolyphosphate ( STPP )
NAME

CHEMICAL
PROPERTIES
CHEMICAL Na5P3O10
FORMULA
MOLECULAR 367.85
WEIGHT

MELTING 622
POINT ( C )
PH 7–8
RANGE
BOILING Not specified
POINT ( C )
DENSITY 2.52 g / cm3
SOLUBILITY Soluble in water
546
 SODIUM
TRIPOLYPHOSPHATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE granular
COLOR White
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place
STPP, powder or granular form and does not
smell, is a solid raw material in white.

STPP, including in particular detergent, ions

are used as raw materials in industrial cleaning
helps holder and many other areas.

APPLICATIONS STPP, breaking from the hardness of the water

and dirt remover laundry, there is binding
feature of the site. STPP prevalent regular and
compact laundry detergent (powder, liquid, gel
and tablets), automatic dishwashing detergents
(powders, liquids, gels and tablets) are used in
toilet cleaners and surface cleaners.

STPP is used in industrial and institutional

cleaners. STPP also a water softener, as food
preservatives, as peptizing agents, oil wells and
cotton decoction is used as a clotting agent
disrupting the release agent.
 STEARIC
ACID

GENERAL
DEFINITIONS
CAS 57 – 11 – 4
NUMBER
GENERAL Industrial and cosmetic ingredients
CATEGORY
FACTORIAL Emulsifier and thickener agent
CATEGORY
TRADE Stearic acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL C18H36O2
FORMULA
MOLECULAR 284.50
WEIGHT

MELTING 69.4
POINT ( C )
FLASH 196
POINT ( C )
BOILING 350
POINT ( C )
DENSITY 0.950 g / cm3
SOLUBILITY Insoluble in water. Soluble in diethyl ether and
acetone
548
 STEARIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal or powder
COLOR White or yellow
ODOR Acharacteristic odor.
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

Stearic acid, which is a slightly peculiar smell,

raw white or pale yellow solid granular or
powder form.
APPLICATIONS
Stearic acid, used as emulsifiers in cosmetics
manufacture and consistency enhancer. Also in
industrial areas and in particular the accelerator
and softening agent in rubber production, as a
hardening agent in the production of candles,
as a raw material in the textile and help in
curing agent is used as raw material in soap.
 SULFAMIC
ACID

GENERAL
DEFINITIONS
CAS 5329 – 14 – 6
NUMBER
GENERAL Industrial ingredients
CATEGORY
FACTORIAL Cleaning agent
CATEGORY
TRADE Sulfamic acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL H3NSO3
FORMULA
MOLECULAR 97.10
WEIGHT

MELTING 205
POINT ( C )
PH 1–2
RANGE
BOILING Not specified
POINT ( C )
DENSITY 2.15 g / cm3
SOLUBILITY Soluble in water
550
 SULFAMIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Crystal
COLOR White
ODOR Odorless
AID It causes an irritation. In contact, wash plenty
MEASURES water.
STORAGE
Keep cool and dry place

Sulfamic acid, non-odor, a solid raw material is

white and crystalline format.

APPLICATIONS

Sulfamic acid industry rust remover is a

material used for cleaning and descaling metal
surfaces. Furthermore, the dye and will find use
in the production of pigments. In the paper
industry it is used as a chlorine stabilizer.
 SULPHURIC
ACID

GENERAL
DEFINITIONS
CAS 7664 – 93 – 9
NUMBER
GENERAL Industrial ingredients
CATEGORY
FACTORIAL Strong acid
CATEGORY
TRADE Sulphuric acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL H2SO4
FORMULA
MOLECULAR 98.07
WEIGHT

MELTING 10
POINT ( C )
PH 1
RANGE
BOILING 337
POINT ( C )
DENSITY 1.84 g / cm3
SOLUBILITY Soluble in water
552
 SULPHURIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless and clear
ODOR Odorless
AID In case of contact, immediately flush skin with plenty
MEASURES of water for at least 15 minutes while removing
contaminated clothing and shoes. Cover the irritated
skin with an emollient. Cold water may be used.Wash
clothing before reuse. Thoroughly clean shoes before
reuse. Get medical attention immediately.

STORAGE
Keep cool and dry place

Sulfuric acid, water attracts many organic

substances and form strong exothermic
reactions. sulfuric acid dilution job to do this is
APPLICATIONS very difficult and dangerous. Among the people
known as battery acid sulfuric acid. Batteries
and battery used in construction.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

T
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 TARTARIC
ACID

GENERAL
DEFINITIONS
CAS 526 – 83 – 0
NUMBER
GENERAL Food and industrial ingredients
CATEGORY
FACTORIAL Organic acid
CATEGORY
TRADE Tartaric acid
NAME

CHEMICAL
PROPERTIES
CHEMICAL C4H4O6
FORMULA
MOLECULAR 150.085
WEIGHT

MELTING 170
POINT ( C )
PH 2–3
RANGE
BOILING Not specified
POINT ( C )
DENSITY 1.790 g / cm3
SOLUBILITY Soluble in water
554
 TARTARIC
ACID

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place
Tartaric acid, tartaric acid used in various
food products such as confectionery products
and beverages; The main grape in finding
applications in a delicious beverage, grape
jam and serves as tasty tart sweet
confections acidity regulators with
marmalade. In sour hard candy apples are
APPLICATIONS used together with citric acid to give tart
cherry and other flavors. However, in many
applications, such as citric acid and tartaric
acid show a swelling effect, which is
monopotassium salt ingrediyent of cream of
tartar it is used as baking powder. These
emulsifiers in bakery outside use and
protecting mission-tartaric acid, as excipients
or carriers in the pharmaceutical industry, for
cleaning and polishing metals finds silvered
and application as chelating agents of metal
color here in mirrors.
 TITANIUM
DIOXIDE

GENERAL
DEFINITIONS
CAS 13463 – 67 – 7
NUMBER
GENERAL Food and industrial ingredients
CATEGORY
FACTORIAL Color white agent
CATEGORY
TRADE Titanium dioxide
NAME

CHEMICAL
PROPERTIES
CHEMICAL TiO2
FORMULA
MOLECULAR 79.886
WEIGHT

MELTING 1843
POINT ( C )
PH Not specified
RANGE
BOILING 2972
POINT ( C )
DENSITY 4.30 g / cm3
SOLUBILITY Insoluble in water. Disperable in water.
556
 TITANIUM
DIOXIDE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder
COLOR White
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place
Titanium dioxide synthetic food dyes in food
coloring that class food products allowed in
the codex are used in limited amounts. Ice
cream production, icy drinks, necessary in
sodas, fruit soda is used in production.

Also in the production of confectionery

APPLICATIONS products, jellies, flavored drinks, chewing gum
varieties in sugar and low-sugar, bakery
products, confectionery etc. it is used in many
food production.

Food except pharmaceuticals, cosmetics,

detergent products, car care products, in a
small amount of agricultural products,
cleaning products, colored stones, play
dough, etc. are also used for coloring many
people in contact with the product.
 TETRAPOTASSIUM
PYROPHOSPHATE

GENERAL
DEFINITIONS
CAS 7320 – 34 – 5
NUMBER
GENERAL Industrial ingredients
CATEGORY
FACTORIAL Sequestering agent
CATEGORY
TRADE Tetrakal
NAME

CHEMICAL
PROPERTIES
CHEMICAL K4O7P2
FORMULA
MOLECULAR 330.34
WEIGHT

MELTING 1090
POINT ( C )
PH Not specified
RANGE
BOILING Not specified
POINT ( C )
DENSITY 2.35 g / cm3
SOLUBILITY Partially soluble in water.
558
 TETRAPOTASSIUM
PYROPHOSPHATE

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Powder or crystal
COLOR White
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

Tetrakal, no smell, the white color is a solid

APPLICATIONS raw crystal or powder form.

Tetrakal, several industrial areas and

especially in cleaning products, including
detergents in particular, holders used for ion
and water softeners. Also find use in some
fertilizer phosphate to meet the need in the
agricultural field.
 TRIETHANOLAMINE
TEA

GENERAL
DEFINITIONS
CAS 102 – 71 – 6
NUMBER
GENERAL Industrial and detergent ingredients
CATEGORY
FACTORIAL Alkaline and Ph regulator
CATEGORY
TRADE Tea
NAME

CHEMICAL
PROPERTIES
CHEMICAL C6H15NO3
FORMULA
MOLECULAR 149.18
WEIGHT

MELTING 21
POINT ( C )
PH 12 – 13
RANGE
BOILING 338
POINT ( C )
DENSITY 1.125 g / cm3
SOLUBILITY Soluble in water.
560
 TRIETHANOLAMINE
TEA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Liquid
COLOR Colorless and clear
ODOR Odorless
AID It causes an irritation. Case of contact, wash
MEASURES plenty water.
STORAGE
Keep cool and dry place

Triethanolamine (TEA), with its distinctive

odor, viscous liquid form, transparent,
colorless or slightly yellow color is a raw
material.
APPLICATIONS
Triethanolamine (TEA), to adjust PH in many
industrial products, especially detergents and
cleaning. Especially in the production of liquid
detergent used in many oil and dirt solve
solve formulas. It is also used in some
chemical raw materials into a water-based
solvent products in the agricultural sector.
AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

SOLVER
CHEM
PUBLICATIONS

SOLVER CHEM PUBLICATIONS

AUTO CARE PRODUCTS FORMULATIONS ENCYCLOPEDIA

U
AUTO CARE

CHEMICALS

ENCYCLOPEDIA

SOLVER CHEM PUBLICATIONS

 UREA

GENERAL
DEFINITIONS
CAS 57 – 13 – 6
NUMBER
GENERAL Agricultural and industrial ingredients
CATEGORY
FACTORIAL Nitrogen source for fertilizers
CATEGORY
TRADE Urea
NAME

CHEMICAL
PROPERTIES
CHEMICAL CH4N2O
FORMULA
MOLECULAR 60.06
WEIGHT

MELTING 132
POINT ( C )
PH 6–7
RANGE
BOILING 337
POINT ( C )
DENSITY 1.325 g / cm3
SOLUBILITY Soluble in water
562
 UREA

PHYSICAL PROPERTIES
AND
USES
APPEARANCE Granular
COLOR White
ODOR Odorless
AID It causes no irritation.
MEASURES
STORAGE
Keep cool and dry place

Urea, no smell, the white color is a solid raw

APPLICATIONS crystal or granular form.

Urea, detergent sector and industry the main

raw material used as raw materials or help.

Urea is used in making up the agricultural

field, and urea formaldehyde resins.