Scribd
Upload
42 views

Sop Configuration Mikrotik

1. The document provides instructions for configuring a MikroTik router, including downloading MikroTik software, burning the ISO file to CD, installing MikroTik during the computer's boot process, and logging in. 2. It then describes basic MikroTik configuration steps like changing the system identity and password, setting Ethernet interface names and IP addresses, configuring IP firewall NAT and routing, and setting up a hotspot interface. 3. Users are instructed to connect their PC to the MikroTik router using Ethernet, access the router's configuration through Winbox, and setup the hotspot interface and settings.

Uploaded by

Heja Wana
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
42 views

Sop Configuration Mikrotik

1. The document provides instructions for configuring a MikroTik router, including downloading MikroTik software, burning the ISO file to CD, installing MikroTik during the computer's boot process, and logging in. 2. It then describes basic MikroTik configuration steps like changing the system identity and password, setting Ethernet interface names and IP addresses, configuring IP firewall NAT and routing, and setting up a hotspot interface. 3. Users are instructed to connect their PC to the MikroTik router using Ethernet, access the router's configuration through Winbox, and setup the hotspot interface and settings.

Uploaded by

Heja Wana
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

SOP

Configuration MikroTik :

1. Download mikrotik at http://www.mikrotik.com


2. Prepare Mikrotik RouterBoard
3. Burn the MikroTik ISO file to a CD.
4. Insert the mikrotik cd into the cd/dvd room.
5. Setting your computer's bios, on the initial boot (first boot) it is your cd/dvd room.
6. After setting, your computer will boot first to your cd/dvd room. If successful, a
display like the one below will appear.

7. Perform the Mikrotik installation process by selecting (checking) all available options
with the 'a' button. If everything is checked, press the 'i' button to install Mikrotik.
8. Wait a moment until the installation process is complete. Be patient, it's just a
moment. When finished press Enter key to reboot.
9. After your computer restarts then you will be asked to check the disk or not. Click the
“Y” button to agree, or click the “N” button to disapprove.
10. After that, the login screen will appear. "admin" (without quotes) on Mikrotik Login.
And just enter the password. because the default password is no password.
11. If successful, the initial display image of the proxy will appear (see the image below).
Indicates that you have successfully installed mikrotik.

CONFIGURATION MIKROTIK
Changing User Identity
admin@MikroTik] > system identity set name=Mukhlis
admin@Mukhlis] >
Change Password

Change Ethernet Name


admin@Mukhlis] > interface set name=Server ether1
admin@Mukhlis] > interface set name=NeThunter ether2

Ip Address
admin@Mukhlis] > ip address add address=172.77.31.13/24 interface=Server
admin@Mukhlis] > ip address add address=77.77.31.1/24 interface=NeTHunter

Ip Gateway dan DNS


admin@Mukhlis] > ip dns set servers=172.77.31.1 allow-remote-requests=yes
admin@Mukhlis] > ip route add gateway=172.77.31.1

IP Firewall
is as a bridge (security port) internet connection
admin@Mukhlis] > ip firewall nat add chain=srcnat action=masquerade out-interface=Server
Hotspot
Connect the Mikrotik PC with other PCs or your laptop using a UTP cable.
Open Winbox. Login to Mikrotik using Winbox.\

Go to IP => Hostpot => Hostpot Setup.

The Hostpot Interface is NetHunter (ether2) because this interface is for connecting to the
client. After that select yes yes
Later when you meet the user display and password can be changed or not, it's up to you. The
following is an example of a login display.

You might also like