0% found this document useful (0 votes)
117 views

TSM - FHM - A318/A319/A320/A321 REV DATE: Aug 01/2021 Tail Number - MSN - FSN: 9H-FHB - 03025 - 001

Uploaded by

özkanNeşeli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
117 views

TSM - FHM - A318/A319/A320/A321 REV DATE: Aug 01/2021 Tail Number - MSN - FSN: 9H-FHB - 03025 - 001

Uploaded by

özkanNeşeli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TSM - FHM - A318/A319/A320/A321 REV DATE: Aug 01/2021

Tail Number - MSN - FSN: 9H-FHB - 03025 - 001


21-61-00-810-828-A - Pack 1 Compressor Overheat

** ON A/C FSN ALL


TASK 21-61-00-810-828-A
Pack 1 Compressor Overheat
1. Possible Causes:

-HEAT EXCHANGER-MAIN (10HM7)


-HEAT EXCHANGER-PRIMARY (10HM6)
-SENSOR-COMPRESSOR TEMPERATURE (12HH)
-MACHINE-AIR CYCLE (10HM1)
-FLOW CTL UNIT-PACK 1 (23HB)
-SENSOR-DELTA PRESS,PACK 1 (23HB2)
-wiring
2. Job Set-up Information

A. Referenced Information

REFERENCE DESIGNATION
Ref. AMM 21-51-11-000-001 Removal of the Differential Pressure Sensor
Ref. AMM 21-51-11-400-001 Installation of the Differential Pressure Sensor
Ref. AMM 21-51-51-000-001 Removal of the Pack Flow-Control Valve/ Pack Flow-Control Unit
Ref. AMM 21-51-51-400-001 Installation of the Pack Flow-Control Valve/Pack Flow-Control Unit
Ref. AMM 21-52-00-100-001 Remove Primary and Main Heat Exchangers for In Shop Cleaning
Ref. AMM 21-52-21-000-001 Removal of the Air Cycle Machine
Ref. AMM 21-52-21-400-001 Installation of the Air Cycle Machine
Ref. AMM 21-61-00-710-001 Operational Test of the Pack Temperature-Control System
Ref. ASM 21-61-04
Ref. AMM 21-61-11-000-001 Removal of the Compressor Outlet - Temperature Sensor
Ref. AMM 21-61-11-400-001 Installation of the Compressor Outlet - Temperature Sensor

3. Fault Confirmation
SUBTASK 21-61-00-710-104-B
A. Do the operational test of the pack temperature-control system Ref. AMM 21-61-00-710-001.

4. Fault Isolation
SUBTASK 21-61-00-810-120-B
A. If the test gives the maintenance message P1 COMP OVERHEAT:
-

JCP Title: tsm for pack1 ovht © AIRBUS S.A.S. ALL RIGHTS RESERVED. Page 1 of 2
CONFIDENTIAL AND PROPRIETARY DOCUMENT. PRINT DATE: Aug 20/2021
TSM - FHM - A318/A319/A320/A321 REV DATE: Aug 01/2021
Tail Number - MSN - FSN: 9H-FHB - 03025 - 001
21-61-00-810-828-A - Pack 1 Compressor Overheat

examine the ram air channel to the primary heat exchanger (10HM6) and to the main heat
exchanger (10HM7) for blockages. If the ram air channel is blocked, remove the unwanted
material.
(1) If the fault continues:
- do a check of the main heat exchanger (10HM7) for contamination:
- if the main heat exchanger is clogged, clean the HEAT EXCHANGER-MAIN (10HM7) and
the HEAT EXCHANGER-PRIMARY (10HM6) Ref. AMM 21-52-00-100-001.
(2) If the fault continues:
- replace the SENSOR-COMPRESSOR TEMPERATURE (12HH) Ref. AMM 21-61-11-000-
001 and Ref. AMM 21-61-11-400-001.
(3) If the fault continues:
- do a check and repair the wiring Ref. ASM 21-61-04 from:
- the SENSOR (12HH) to the ACSC1 (47HH).
(4) If the fault continues:
- make sure that the air cycle machine (10HM1) operates correctly correctly while the Air
Conditioning Pack 1 (10HM) operates. If it does not operate correctly, replace MACHINE-
AIR CYCLE (10HM1) Ref. AMM 21-52-21-000-001 and Ref. AMM 21-52-21-400-001.
(5) If the fault continues:
- replace the FLOW CTL UNIT-PACK 1 (23HB) Ref. AMM 21-51-51-000-001 and Ref. AMM
21-51-51-400-001.
(6) If the fault continues:
- replace the SENSOR-DELTA PRESS,PACK 1 (23HB2) Ref. AMM 21-51-11-000-001 and
Ref. AMM 21-51-11-400-001.
SUBTASK 21-61-00-710-105-A
B. Do the test as given in the Para. 3.A.

5. Close-up
SUBTASK 21-61-00-860-077-A
A. Put the aircraft back to its initial configuration.

JCP Title: tsm for pack1 ovht © AIRBUS S.A.S. ALL RIGHTS RESERVED. Page 2 of 2
CONFIDENTIAL AND PROPRIETARY DOCUMENT. PRINT DATE: Aug 20/2021

You might also like