Scribd
Upload
917 views1 page

Sertifikat Sling

This document is a mill test certificate for steel wire rope. It provides details on the construction, grade, diameter, length, breaking load test results, and chemical composition analysis of the wire. Key information includes that it is a 19 strand + IWRC non-rotating construction rope that is 1000 meters long, has an actual breaking load of 59.0 KN which meets the specified breaking load of 58.1 KN, and has a carbon content of 0.6% according to the chemical analysis of the wire rod.

Uploaded by

Hendra Saputra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
917 views1 page

Sertifikat Sling

This document is a mill test certificate for steel wire rope. It provides details on the construction, grade, diameter, length, breaking load test results, and chemical composition analysis of the wire. Key information includes that it is a 19 strand + IWRC non-rotating construction rope that is 1000 meters long, has an actual breaking load of 59.0 KN which meets the specified breaking load of 58.1 KN, and has a carbon content of 0.6% according to the chemical analysis of the wire rod.

Uploaded by

Hendra Saputra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

P W RTE('

STEEL WIRE ROPE


MILL TEST CERTIFICATE

ACCORDING AS EN 12385-4 REEL NO REELS


COUNTRY OF ORIGIN CHINA TEST NO lREEL

--. _-TYPFAXD GRAOE


cor.lsTRUcTlON 19 xT + IWRC Non Rotating SURFACE UNGALVANIZE
GRABE 177ONlmm2 LUBRICATION C3
DIAiIETER 10 mm LAY RHRL
CORE IWRC
LENGTH 1000 m NETWEIGHT 402 KGS

TEST RESULTS
ROPE
ACTUAL DIAMETER OF ROPE 10 mm
SPECIFIED BREAKING LOAD 58.1 KN
ACTUAL BREAKING LOAD 59.0 KN
PREFORMING TEST SATISFACTORY

WIRE
ACTUAL DIAMETER OF WIRE 0.63 mm
ACTUAL DIAMETER OF UUIRE 0.63 mm
TENSILE STRENGTH OF WRES 177A - 1800 N/mm2
TORSION TEST SATISFACTORY

CHEITICAL ANALYSIS OF WRE ROD


c H EMTCAL COM P OS tTtON (y")
HEAT NO. S890001388
c (o/") si (%) Mn (%) P (%) s (%) Cr (o/o) Ni (%)
0,6 o,21 0,56 0,012 0,008 0,03 0,02

WE HEREBY CERTIFY THAT THE QUALITY OF THE ABOVE GOODSARE GOOD,


AND
THE ABOYE RESUTTS ARE TRUE AND CORRECT

lnspection Date : 25 June 2019

INSPECTOR: ZHOU XUELTN


Y

IEF INSPECTOR (C

You might also like