A780L3L Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
 Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start ................................................................................ 1
1.2 Package Checklist ............................................................................. 1
1.3 Motherboard Features...................................................................... 2
1.4 Rear Panel Connectors ..................................................................... 3
1.5 Motherboard Layout......................................................................... 4
Chapter 2: Hardware Installation .......................... 5
2.1 Installing Central Processing Unit (CPU)....................................... 5
2.2 FAN Headers...................................................................................... 7
2.3 Installing System Memory ................................................................ 8
2.4 Connectors and Slots ....................................................................... 10
Chapter 3: Headers & Jumpers Setup ................... 13
3.1 How to Setup Jumpers .................................................................... 13
3.2 Detail Settings.................................................................................. 13
Chapter 4: RAID Functions .................................. 18
4.1 Operating System............................................................................ 18
4.2 Raid Arrays ...................................................................................... 18
4.3 How RAID Works............................................................................. 18
Chapter 5: Useful Help ........................................ 21
5.1 Driver Installation Note.................................................................. 21
5.2 Software............................................................................................ 22
5.3 Extra Information............................................................................ 26
5.4 Troubleshooting............................................................................... 28
Appendix: SPEC In Other Languages ................... 30
German.................................................................................................................. 30
French .................................................................................................................... 32
Italian..................................................................................................................... 34
Spanish ................................................................................................................... 36
Portuguese ............................................................................................................ 38
Polish...................................................................................................................... 40
Russian ................................................................................................................... 42
Arabic..................................................................................................................... 44
Japanese ................................................................................................................ 46
 A780L3L

CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„ Prepare a dry and stable working environment with
sufficient lighting.
„ Always disconnect the computer from power outlet
before operation.
„ Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
„ Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
„ Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
„ Keep the computer from dangerous area, such as heat
source, humid air and water.

1.2 PACKAGE CHECKLIST

HDD Cable X 1 (optional)
Serial ATA Cable X 2
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)
Serial ATA Power Cable X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

1
Motherboard Manual

1.3 MOTHERBOARD FEATURES

SPEC

Socket AM3
AMD 64 Architecture enables 32 and 64 bit
AMD Sempron / Athlon II / Phenom II
CPU computing
processors
Supports Hyper Transport 3.0
(Maximum Watt: 95W)

Support HyperTransport 3.0

FSB
Supports up to 3.2 GT/s Bandwidth

AMD RS780L
Chipset
AMD SB710

Low Pin Count Interface

ITE 8721
Environment Control initiatives
Super I/O Provides the most commonly used legacy
H/W Monitor
Super I/O functionality
ITE's "Smart Guardian" function

DDR3 DIMM Slots x 2

Dual Channel Mode DDR3 memory module
Main Max Memory Capacity 8GB
Supports DDR3 800 / 1066 / 1333
Memory Each DIMM supports 512MB/
Registered DIMM and ECC DIMM is not supported
1GB/2GB/4GB DDR3

Max Shared Video Memory is 512MB

Graphics Integrated in AMD RS780L Chipset
DVI/HDCP support

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

IDE Integrated IDE Controller
supports PIO Mode 0~4,

Data transfer rates up to 3 Gb/s

SATA II Integrated Serial ATA Controller
SATA Version 2.0 specification compliant

10 / 100 Mb/s auto negotiation

LAN Realtek RTL 8103EL
Half / Full duplex capability

5.1 channels audio out

Sound ALC662
High Definition Audio

PCI Express Gen2 x16 slot x1 Supports PCI-E Gen2 x16 expansion cards
Slots
PCI slot x2 Supports PCI expansion cards

On Board Floppy Connector x1 Each connector supports 2 Floppy drives

Connectors IDE Connector x1 Each connector supports 2 IDE devices

SATA Connector x4 Each connector supports 1 SATA device

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

2
 A780L3L
SPEC

S/PDIF out Connector x1 Supports digital audio out function

CPU Fan Header x1 CPU Fan power supply (with Smart Fan function)

System Fan Header x1 System Fan Power supply

CMOS clear Header x1 Restore CMOS data to factory default

USB Connector x2 Each connector supports 2 front panel USB ports

Power Connector (24pin) x1 Connects to Power supply

Power Connector (4pin) x1 Connects to Power supply

Printer Port Connector x1 Each connector supports 1 Printer port

Serial Port Connector x1 Connects to RS-232 Port

PS/2 Keyboard x1 Connects to PS/2 Keyboard

PS/2 Mouse x1 Connects to PS/2 Mouse

DVI port x1 Connect to DVI-D monitor

Back Panel
VGA port x1 Connect to D-SUB monitor
I/O
LAN port x1 Connect to RJ-45 Ethernet cable

USB Port x4 Connect to USB devices

Audio Jack x3 Provide Audio-In/Out and microphone connection

Board Size 182 mm(W) x 235 mm(L)

Special
RAID 0 / 1 / 1+0 support
Features

Biostar reserves the right to add or remove support

OS Support Windows XP / Vista / 7
for any OS With or without notice.

1.4 REAR PANEL CONNECTORS

PS/2 LAN
Mouse Line In/
Surround

Line Out

Mic In 1/
Bass/ Center

PS/2 VGA DVI-D USBX2 USBX2

Keyboard

3
Motherboard Manual
1.5 MOTHERBOARD LAYOUT
KBMS1 CPU_FAN1

ATXPWR2
VGA1

ATXPWR1

S o ck et A M3

D DR 3_A1
D DR3_ B1
DVI1

USB1

RJ45USB1

IDE1
JUSBV1
B ATTERY

AMD
AUDIO1 RS780L

F_AUDIO1

LAN PEX16_1
BIOS

PCI1
Super
I/O JSPDIFOUT1
JCMOS1
AMD
SB710 SATA4
PCI2

F_USB1 SATA3
FDD1
F_USB2
Codec JUSBV2

J_COM1 J_PRINT1 PANEL1 SATA1 SATA2 SYS_FAN1

Note: ■ represents the 1st pin.

4
 A780L3L
CHAPTER 2: HARDWARE INSTALLATION
2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.

Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.

5
Motherboard Manual
Step 3: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the CPU_FAN1. This completes the
installation.

6
 A780L3L

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different due to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header

1 Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate
sense
4 Smart Fan
Control (By Fan)

SYS_FAN1: System Fan Header

Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate
sense

3
1

Note:
The CPU_FAN1 supports 4-pin head connector. The SYS_FAN1 supports 3-pin head
connector. When connecting with wires onto connectors, please note that the red wire is
the positive and should be connected to pin#2, and the black wire is Ground and should
be connected to GND.

7
Motherboard Manual
2.3 INSTALLING SYSTEM MEMORY
A. Memory Modules

D DR 3_A1
D DR3_ B1

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

8
 A780L3L
B. Memory Capacity
DIMM Socket Total Memory
DDR3 Module
Location Size
DDR3_A1 512MB/1GB/2GB/4GB
Max is 8GB.
DDR3_B1 512MB/1GB/2GB/4GB

C. Dual Channel Memory installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table
Dual Channel Status DDR3_A1 DDR3_B1
Disabled X O
Disabled O X
Enabled O O
(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or
x16)

9
Motherboard Manual

2.4 CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.

2 34

1 33

IDE1: Hard Disk Connector

The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.

40 39

2 1

SATA1~SATA4: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 4channels SATA interface, it
satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.

Pin Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
SATA4 6 RX+
SATA3 7 Ground
SATA 1 SATA2

1 4 7

10
 A780L3L

ATXPWR1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX
power supply.

12 24

1 13

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

ATXPWR2: ATX Power Source Connector

Connecting this connector provides +12V to CPU power circuit.

2 1

3 4

Pin Assignment
1 +12V
2 +12V
3 Ground
4 Ground

Note:
Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.

11
Motherboard Manual
PEX16_1: PCI-Express Gen2 x16 Slot
- PCI-Express 2.0 compliant.
- Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
- PCI-Express supports a raw bit-rate of 5.0Gb/s on the data pins.
- 2X bandwidth over the PCI-Express 1.1 architecture.

PEX16_1

PCI1~PCI2: Peripheral Component Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

12
 A780L3L
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
PWR_LED
On/Off
+ + -
9 16
1 8
+ -
SPK RST
HLED

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
N/A
2 N/A Speaker 10 N/A
3 N/A Connector 11 N/A N/A
4 Speaker 12 Power LED (+)
5 HDD LED (+) Hard drive 13 Power LED (+) Power LED
6 HDD LED (-) LED 14 Power LED (-)
7 Ground 15 Power button
Reset button Power-on button
8 Reset control 16 Ground

13
Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
F _ US B 1 7 Ground
F _ US B 2 8 Ground
2 10 9 NC
10 Key

1 9

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data.lPease carefully follow the procedures to avoid damaging the
motherboard.

1 3

Pin 1-2 Close:

Normal Operation (default).

1 3

1 3
Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.

14
 A780L3L

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.

Pin Assignment
1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
9 1 6 Jack Sense
7 Front Sense
8 Key
10 2 9 Left line in
10 Jack Sense

JSPDIFOUT1: Digital Audio-out Connector

This connector allows user to connect the PCI bracket SPDIF output header.

Pin Assignment
1 +5V
2 SPDIF_OUT
3 Ground

1 3

15
Motherboard Manual
J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.

2 26

1 25

Pin Assignment Pin Assignment

1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy
9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key

J_COM1: Serial port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin Assignment
1 Carrier detect
2 Received data
3 Transmitted data
4 Data terminal ready
5 Signal ground
6 Data set ready
7 Request to send
2 10 8 Clear to send
9 Ring indicator
10 NC
1 9

16
 A780L3L

JUSBV1/JUSBV2: Power Source Headers for USB Ports

Pin 1-2 Close:
JUSBV1: +5V for USB ports at USB1/RJ45USB1.
JUSBV2: +5V for USB ports at front panel (F_USB1/F_USB2).
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at USB1/RJ45USB1.
JUSBV2: +5V STB for USB ports at front panel (F_USB1/F_USB2).

3
1 3
1
JUS BV1
Pin 1-2 close
3

1 3 3

1 3 1
Pin 2-3 close
JUSB V2

17
Motherboard Manual

CHAPTER 4: RAID FUNCTIONS

4.1 OPERATING SYSTEM
z Supports Windows XP , Windows Vista, and Windows 7.

4.2 RAID ARRAYS

RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 1+0: RAID 1+0 combines the techniques used in RAID 0 and RAID 1.

4.3 HOW RAID WORKS

RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment.
This technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
- Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the
platform.
- Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
- Benefits: provides increased data throughput, especially for large files.
No capacity loss penalty for parity.
- Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
- Fault Tolerance: No.

Block 1 Block 2
Block 3 Block 4
Block 5 Block 6

18
 A780L3L
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on
a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if
the active volume or drive is corrupted or becomes unavailable because of a hardware
failure.
RAID techniques can be applied for high-availability solutions, or as a form of
automatic backup that eliminates tedious manual backups to more expensive and less
reliable media.
Features and Benefits
- Drives: Minimum 2, and maximum is 2.
- Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
- Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
- Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
- Fault Tolerance: Yes.

Block 1 Block 1
Block 2 Block 2
Block 3 Block 3

19
Motherboard Manual
RAID 1+0:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
- Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
- Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID
levels in an array, and allows for spare disks.
- Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
- Fault Tolerance: Yes.

Block 1 Block 1 Block 2 Block 2

Block 3 Block 3 Block 4 Block 4
Block 5 Block 5 Block 6 Block 6

20
 A780L3L

CHAPTER 5: USEFUL HELP

5.1 DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html

21
Motherboard Manual
5.2 SOFTWARE

Installing Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
*informa ti on that you
This bl ock will show
must provide. Wi thout
this information, you may
the i nformation which *Describe conditi on
of your system.
would be collected in
not be able to send out the mail .
the mail.

*Select your area or

the area cl ose to you.

Provide the e-ma il

address that you would
like to send the copy to.

*Provid e the name of

the memory module
manufacturer.

Provide the name of

the power suppl y
manufacturer and the
model no.

Send the mail out. Exi t thi s dialog.

Save these in forma tion to a .txt file

22
 A780L3L

After filling up this information, click “Send”

to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click

“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see

your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.

We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.

If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

23
Motherboard Manual

BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.

Show current BIOS information

AWARD BIOS AMI BIOS

Clear CMOS function

(Only for AWARD BIOS)

Save current BIOS

to a .bin file

Update BIOS
with a BIOS file

<Backup BIOS>

Once click on this button, the saving

dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

24
 A780L3L

<Update BIOS>

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.

Then click Update BIOS button, a

dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the

open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the

proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on

OK to restart the system.

While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.

25
Motherboard Manual

5.3 EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown

automatically to avoid a damage of the CPU, and the system may not
power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.

Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

26
 A780L3L

BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12>
during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIO-Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, save the BIOS file into a USB pen drive or a floppy disk.

3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.

4. Power on or reset the computer and then

press <F12> during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press <Enter> to enter the utility.

5. The utility will show the BIOS

files and their respective
information. Select the proper
BIOS file and press <Enter>
then <Y> to perform the BIOS
update process.

6. After the update process, the utility will ask you to reboot the system.
Press <Y> to proceed. BIOS update completes.

z This utility only allows storage device with FAT32/16 format and single
partition.
z Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.

27
Motherboard Manual

5.4 TROUBLESHOOTING
Probable Solution
1. There is no power in the system. 1. Make sure power cable is
Power LED does not shine; the securely plugged in.
fan of the power supply does not 2. Replace cable.
work 3. Contact technical support.
2. Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights Using even pressure on both ends of
are on, power indicator lights are lit, the DIMM, press down firmly until the
and hard drives are running. module snaps into place.
System does not boot from a hard disk 1. Check cable running from disk to
drive, but can be booted from optical disk controller board. Make sure
drive. both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical 1. Back up data and applications
drive. Hard disks can be read, files.
applications can be used, but system 2. Reformat the hard drive.
fails to boot from a hard disk. Re-install applications and data
using backup disks.
Screen message shows “Invalid Review system’s equipment. Make sure
Configuration” or “CMOS Failure.” correct information is in setup.
System cannot boot after user installs a 1. Set master/slave jumpers
second hard drive. correctly.
2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

28
 A780L3L

This page is intentionally left blank.

29
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen

Sockel AM3
Die AMD 64-Architektur unterstützt eine 32-Bit- und
AMD Sempron / Athlon II / Phenom II
CPU 64-Bit-Datenverarbeitung
Prozessoren
Unterstützt Hyper Transport 3.0
(Maximales Watt: 95W)

Unterstützt HyperTransport 3.0 mit einer

FSB
Bandbreite von bis zu 3.2 GT/s

AMD RS780L
Chipsatz
AMD SB710

Low Pin Count-Schnittstelle

ITE8721
Umgebungskontrolle,
Super E/A Bietet die häufig verwendeten alten Super
Hardware-Überwachung
E/A-Funktionen.
"Smart Guardian"-Funktion von ITE

DDR3 DIMM-Steckplätze x 2 Dual-Kanal DDR3 Speichermodul

Arbeitsspeich Max. 8GB Arbeitsspeicher Unterstützt DDR3 800 / 1066 / 1333

er Jeder DIMM unterstützt 512MB/ registrierte DIMMs. ECC DIMMs werden nicht

1GB/2GB/4GB DDR3. unterstützt.

Max. 512MB gemeinsam benutzter Videospeicher

Grafik Integrierter AMD RS780L-Chipsatz
Unterstützt DVI/HDCP

Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus

IDE Integrierter IDE-Controller
Unterstützt PIO-Modus 0~4,

Datentransferrate bis zu 3 Gb/s

SATA Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 2.0.

10 / 100 Mb/s Auto-Negotiation

LAN Realtek RTL 8103EL
Halb-/ Vollduplex-Funktion

HD
5.1-Kanal-Audioausgabe
Audio-Unters ALC662
Unterstützt High-Definition Audio
tützung

PCI Express Gen2 x16 Steckplatz x1

Steckplätze
PCI-Steckplatz x2

30
 A780L3L
Spezifikationen

Diskettenlaufwerkanschluss x1 Jeder Anschluss unterstützt 2 Diskettenlaufwerke

IDE-Anschluss x1 Jeder Anschluss unterstützt 2 IDE-Laufwerke

SATA-Anschluss x4 Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

S/PDIF Ausgangsanschluss x1 Unterstützt die digitale Audioausgabefunktion

CPU-Lüfterstromversorgungsanschluss (mit Smart

CPU-Lüfter-Sockel x1
Onboard-Ans Fan-Funktion)

chluss System-Lüfter-Sockel x1 System-Lüfter-Stromversorgungsanschluss

"CMOS löschen"-Sockel x1

Jeder Anschluss unterstützt 2

USB-Anschluss x2
Fronttafel-USB-Anschlüsse

Stromanschluss (24-polig) x1

Stromanschluss (4-polig) x1

Druckeranschluss Anschluss x1 Jeder Anschluss unterstützt 1 Druckeranschluss

Serieller Anschluss x1

PS/2-Tastatur x1

PS/2-Maus x1

VGA-Anschluss x1
Rückseiten-E
LAN-Anschluss x1
/A
USB-Anschluss x4

Audioanschluss x3

DVI-Anschluss x1

Platinengröß
182 mm (B) X 235 mm (L)
e

Sonderfunkti
Unterstützt RAID 0 / 1 / 1+0
onen

Biostar behält sich das Recht vor, ohne Ankündigung

OS-Unterstü
Windows XP / Vista / 7 die Unterstützung für ein Betriebssystem
tzung
hinzuzufügen oder zu entfernen.

31
Motherboard Manual

FRENCH
SPEC

Sockel AM3

Processeurs AMD Sempron / Athlon II / L'architecture AMD 64 permet le calcul 32 et 64 bits

UC
Phenom II Prend en charge Hyper Transport 3.0

(Watt maximum : 95W)

Prend en charge Hyper Transport 3.0

Bus frontal
jusqu'à une bande passante de 3.2 GT/s

AMD RS780L
Chipset
AMD SB710

Interface à faible compte de broches

ITE 8721
Initiatives de contrôle environnementales,
Super E/S Fournit la fonctionnalité de Super E/S
Moniteur de matériel
patrimoniales la plus utilisée.
Fonction "Gardien intelligent" de l'ITE

Fentes DDR3 DIMM x 2 Module de mémoire DDR3 à mode à double voie

Mémoire Capacité mémoire maximale de 8 Go Prend en charge la DDR3 800 / 1066 / 1333
principale Chaque DIMM prend en charge des DDR3 Les DIMM à registres et DIMM avec code correcteurs

de 512Mo/1Go/2Go/4Go d'erreurs ne sont pas prises en charge

Mémoire vidéo partagée maximale de 512 Mo

Graphiques Integré dans la chipset AMD RS780L
Prise en charge DVI/HDCP

Mode principale de Bus Ultra DMA 33 / 66 / 100 / 133

IDE Contrôleur IDE intégré
Prend en charge le mode PIO 0~4,

Taux de transfert jusqu'à 3 Go/s.

SATA Contrôleur Serial ATA intégré
Conforme à la spécification SATA Version 2.0

10 / 100 Mb/s négociation automatique

LAN Realtek RTL 8103EL
Half / Full duplex capability

Prise en
Sortie audio à 5.1 voies
charge ALC662
Prise en charge de l'audio haute définition
audio HD

Fente PCI Express Gen2 x16 x1

Fentes
Fente PCI x2

Connecteur Chaque connector prend en charge 2 lecteurs de

Connecteur de disquette x1
embarqué disquettes

Chaque connecteur prend en charge 2 périphériques

Connecteur IDE x1
IDE

32
 A780L3L
SPEC
Chaque connecteur prend en charge 1 périphérique
Connecteur SATA x4
SATA

Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1 Prend en charge la fonction audio du panneau avant

Connecteur de sortie S/PDIF x1 Prend en charge la fonction de sortie audio numérique

Alimentation électrique du ventilateur UC (avec
Embase de ventilateur UC x1
fonction de ventilateur intelligent)

Embase de ventilateur système x1 Alimentation électrique du ventilateur système

Embase d'effacement CMOS x1

Chaque connecteur prend en charge 2 ports USB de
Connecteur USB x2
panneau avant

Connecteur d'alimentation x1
(24 broches)
Connecteur d'alimentation x1
(4 broches)
Chaque connector prend en charge 1 Port
Connecteur de Port d'imprimante x1
d'imprimante

Connecteur de Port série x1

Clavier PS/2 x1
Souris PS/2 x1
E/S du Port VGA x1
panneau Port LAN x1
arrière Port USB x4
Fiche audio x3
Port DVI x1
Dimension
s de la 182 mm (l) X 235 mm (H)
carte
Fonctionnal
ités Prise en charge RAID 0 / 1 / 1+0
spéciales
Biostar se réserve le droit d'ajouter ou de supprimer le
Support SE Windows XP / Vista / 7
support de SE avec ou sans préavis.

33
Motherboard Manual

ITALIAN
SPECIFICA

Sockel AM3
L’architettura AMD 64 abilita la co mputazione 32
Processori AMD Sempron / Athlon II /
CPU e 64 bit
Phenom II
Supporto di Hyper Transport 3.0
(Watt massimo: 95W)

Supporto di HyperTransport 3.0 fino a

FSB
3.2 GT/s di larghezza di banda

AMD RS780L
Chipset
AMD SB710

Interfaccia LPC (Low Pin Count)

ITE 8721
Funzioni di controllo dell’ambiente:
Super I/O Fornisce le funzionalità legacy Super
Monitoraggio hardware
I/O usate più comunemente.
Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR3 x 2

Modulo di memoria DDR3 a canale doppio
Memoria Capacità massima della memoria 8GB
Supporto di DDR3 800 / 1066 / 1333
principale Ciascun DIMM supporta DDR3
DIMM registrati e DIMM ECC non sono supportati
512MB/1GB/2GB/4GB

La memoria video condivisa massima è di 512 MB

Grafica Integrata nel Chipset AMD RS780L
Supporto DVI/HDCP

Modalità Bus Master Ultra DMA 33 / 66 / 100 /

IDE Controller IDE integrato 133

Supporto modalità PIO Mode 0-4

Velocità di trasferimento dei dati fino a 3 Gb/s.

SATA Controller Serial ATA integrato
Compatibile specifiche SATA Versione 2.0.

Negoziazione automatica 10 / 100 Mb/s

LAN Realtek RTL 8103EL
Capacità Half / Full Duplex

Supporto Uscita audio 5.1 canali

ALC662
audio HD Supporto audio High-Definit ion (HD)

Alloggio PCI Express Gen2 x16 x1

Alloggi
Alloggio PCI x2

Connettori Connettore floppy x1 Ciascun connettore supporta 2 unità Floppy

su scheda Connettore IDE x1 Ciascun connettore supporta 2 unità IDE

Connettore SATA x4 Ciascun connettore supporta 1 unità SATA

Connettore pannello frontale x1 Supporta i servizi del pannello frontale

34
 A780L3L
SPECIFICA

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

Connettore output S/PDIF x1 Supporta la funzione d’output audio digitale

Alimentazione ventolina CPU (con funzione Smart

Collettore ventolina CPU x1
Fan)

Collettore ventolina sistema x1 Alimentazione ventolina di sistema

Collettore cancellaz ione CMOS x1

Ciascun connettore supporta 2 porte USB

Connettore USB x2
pannello frontale

Connettore alimentazione x1

(24 pin)

Connettore alimentazione x1

(4 pin)

Connettore Porta stampante x1 Ciascun connettore supporta 1 Porta stampante

Connettore Porta seriale x1

Tastiera PS/2 x1

Mouse PS/2 x1

I/O Porta VGA x1

pannello Porta LAN x1

posteriore Porta USB x4

Connettore audio x3

Porta DVI x1

Dimension 182 mm (larghezza) x 235 mm

i scheda (altezza)

Caratterist

iche Supporto RAID 0 / 1 / 1+0

speciali

Sistemi Biostar si riserva il diritto di aggiungere o

operativi Windows XP / Vista / 7 rimuovere il supporto di qualsiasi sistema

supportati operativo senza preavviso.

35
Motherboard Manual

SPANISH
Especificación

Conector AM3
La arquitectura AMD 64 permite el procesado de 32 y
Procesadores AMD Sempron / Athlon II /
CPU 64 bits
Phenom II
Soporta las tecnologías Hyper Transport 3.0
(Vatio máximo: 95W)

Admite HyperTransport 3.0 con un ancho

FSB
de banda de hasta 3.2 GT/s

Conjunto AMD RS780L

de chips AMD SB710

Interfaz de cuenta Low Pin

ITE 8721
Iniciativas de control de entorno,
Súper E/S Le ofrece las funcionalidades heredadas
Monitor hardware
de uso más común Súper E/S.
Función "Guardia inteligente" de ITE

Ranuras DIMM DDR3 x 2 Módulo de memoria DDR3 de canal Doble

Memoria Capacidad máxima de memoria de 8GB Admite DDR3 de 800 / 1066 / 1333

principal Cada DIMM admite DDR de No admite DIMM registrados o DIMM compatibles con

512MB/1GB/2GB/4GB ECC

Integrados en el conjunto de chips AMD Memoria máxima de vídeo compartida de 512 MB

Gráficos
RS780L Admite DVI/HDCP

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133

IDE Controlador IDE integrado
Soporte los Modos PIO 0~4,

Tasas de transferencia de hasta 3 Gb/s.

SATA Controlador ATA Serie Integrado
Compatible con la versión SATA 2.0.

Negociación de 10 / 100 Mb/s

Red Local Realtek RTL 8103EL
Funciones Half / Full dúplex

Soporte de Salida de sonido de 5.1 canales

ALC662
sonido HD Soporte de sonido Alta Definición

Ranura PCI Express Gen2 x16 X1

Ranuras
Ranura PCI X2

Conectores Conector disco flexible X1 Cada conector soporta 2 unidades de disco flexible

en placa Conector IDE X1 Cada conector soporta 2 dispositivos IDE

Conector SATA X4 Cada conector soporta 1 dispositivos SATA

Conector de panel frontal X1 Soporta instalaciones en el panel frontal

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

36
 A780L3L
Especificación

Conector de salida S/PDIF X1 Soporta función de salida de sonido digital

Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con

función Smart Fan)

Cabecera de ventilador de sistema X1 Fuente de alimentación de ventilador de sistema

Cabecera de borrado de CMOS X1

Conector USB X2 Cada conector soporta 2 puertos USB frontales

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1

(4 patillas)

Conector Puerto de impresora X1 Cada conector soporta 1 Puerto de impresora

Conector Puerto serie X1

Teclado PS/2 X1

Ratón PS/2 X1

Panel Puerto VGA X1

trasero de Puerto de red local X1

E/S Puerto USB X4

Conector de sonido X3

Puerto DVI X1

Tamaño de
182 mm. (A) X 235 Mm. (H)
la placa

Funciones
Admite RAID 0 / 1 / 1+0
especiales

Soporte de
Biostar se reserva el derecho de añadir o retirar el
sistema Windows XP / Vista / 7
soporte de cualquier SO con o sin aviso previo.
operativo

37
Motherboard Manual

PORTUGUESE
ESPECIFICAÇÕES

Sockel AM3
A arquitectura AMD 64 permite uma computação de
Processadores AMD Sempron / Athlon II /
CPU 32 e 64 bits
Phenom II
Suporta as tecnologias Hyper Transport 3.0
(Watt máximo: 95W)
Suporta a tecnologia HyperTransport 3.0
FSB
com uma largura de banda até 3.2 GT/s
AMD RS780L
Chipset
AMD SB710

ITE 8721 Interface LPC (Low Pin Count).

Especificaç
Proporciona as funcionalidades mais Iniciativas para controlo do ambiente
ão Super
utilizadas em termos da especificação Monitorização do hardware
I/O
Super I/O. Função "Smart Guardian" da ITE

Ranhuras DIMM DDR3 x 2

Módulo de memória DDR3 de canal duplo
Capacidade máxima de memória: 8GB
Memória Suporta módulos DDR3 800 / 1066 / 1333
Cada módulo DIMM suporta uma
principal Os módulos DIMM registados e os DIMM ECC não são
memória DDR3 de 512MB/
suportados
1GB/2GB/4GB

Placa Memória de vídeo máxima partilhada: 512 MB

Integrada no chipset AMD RS780L
gráfica Suporta as funções DVI/HDCP
Modo Bus master Ultra DMA 33 / 66 / 100 / 133
IDE Controlador IDE integrado
Suporta o modo PIO 0~4,
Velocidades de transmissão de dados até 3 Gb/s.
SATA Controlador Serial ATA integrado
Compatibilidade com a especificação SATA versão 2.0.
Auto negociação de 10 / 100 Mb/s
LAN Realtek RTL 8103EL
Capacidade semi/full-duplex

Suporte
para áudio Saída de áudio de 5.1 canais
ALC662
de alta Suporta a especificação High-Definition Audio
definição
Ranhura PCI Express Gen2 x16 x1
Ranhuras
Ranhura PCI x2

Conectores Conector da unidade de disquetes x1 Cada conector suporta 2 unidades de disquetes

na placa Conector IDE x1 Cada conector suporta 2 dispositivos IDE

Conector SATA x4 Cada conector suporta 1 dispositivo SATA

Conector do painel frontal x1 Para suporte de várias funções no painel frontal

38
 A780L3L
ESPECIFICAÇÕES

Conector de áudio frontal x1 Suporta a função de áudio no painel frontal

Conector de saída S/PDIF x1 Suporta a saída de áudio digital

Alimentação da ventoinha da CPU (com a função
Conector da ventoinha da CPU x1
Smart Fan)

Conector da ventoinha do sistema x1 Alimentação da ventoinha do sistema

Conector para limpeza do CMOS x1

Conector USB x2 Cada conector suporta 2 portas USB no painel frontal

Conector de alimentação x1
(24 pinos)
Conector de alimentação x1
(4 pinos)
Conector da para impressora x1 Cada conector suporta 1 Porta para impressora

Conector da Porta série x1

Teclado PS/2 x1
Rato PS/2 x1
Entradas/S
Porta VGA x1
aídas no
Porta LAN x1
painel
Porta USB x4
traseiro
Tomada de áudio x3
Porta DVI x1
Tamanho
182 mm (L) X 235 mm (A)
da placa
Característi
cas Suporta as funções RAID 0 / 1 / 1+0
especiais
Sistemas A Biostar reserva-se o direito de adicionar ou remover
operativos Windows XP / Vista / 7 suporte para qualquer sistema operativo com ou sem
suportados aviso prévio.

39
Motherboard Manual

POLISH
SPEC

Sockel AM3
Architektura AMD 64 umożliwia przetwarzanie 32 i 64
AMD Sempron / Athlon II / Phenom II
Procesor bitowe
Procesory
Obsługa Hyper Transport 3.0
(Maksymalny Watt: 95W)

Obsługa HyperTransport 3.0 o szerokości

FSB
pasma do 3.2 GT/s

AMD RS780L
Chipset
AMD SB710

Gniazda DDR3 DIMM x 2

Moduł pamięci DDR3 z trybem podwójnego kanału
Pamięć Maks. wielkość pamięci 8GB
Obsługa DDR3 800 / 1066 / 1333
główna Każde gniazdo DIMM obsługuje moduły
Brak obsługi Registered DIMM oraz ECC DIMM
512MB/1GB/2GB/4GB DDR3

Interfejs Low Pin Count

ITE 8721
Funkcje kontroli warunków pracy,
Super I/O Zapewnia najbardziej powszechne
Monitor H/W
funkcje Super I/O.
Funkcja ITE "Smart Guardian"

Maks. wielkość współdzielonej pamięci video wynosi

Grafika Zintegrowana w chipsecie AMD RS780L 512 MB

Obsługa DVI/HDCP

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master

IDE Zintegrowany kontroler IDE
obsługa PIO tryb 0~4,

Transfer danych do 3 Gb/s.

SATA Zintegrowany kontroler Serial ATA
Zgodność ze specyfikacją SATA w wersji 2.0.

10 / 100 Mb/s z automatyczną negocjacją szybkości

LAN Realtek RTL 8103EL
Działanie w trybie połowicznego/pełnego dupleksu

Obsługa 5.1 kanałowe wyjście audio

ALC662
audio HD Obsługa High-Definition Audio

Gniazdo PCI Express Gen2 x16 x1

Gniazda
Gniazdo PCI x2

Złącza Złącze napędu dyskietek x1 Każde złącze obsługuje 2 napędy dyskietek

wbudowan Złącze IDE x1 Każde złącze obsługuje 2 urządzenia IDE

e Złącze SATA x4 Każde złącze obsługuje 1 urządzenie SATA

Złącze panela przedniego x1 Obsługa elementów panela przedniego

40
 A780L3L
SPEC

Przednie złącze audio x1 Obsługa funkcji audio na panelu przednim

Złącze wyjścia S/PDIF x1 Obsługa funkcji cyfrowego wyjścia audio

Złącze główkowe wentylatora procesora

Zasilanie wentylatora procesora (z funkcją Smart Fan)
x1

Złącze główkowe wentylatora

Zasilanie wentylatora systemowego
systemowego x1

Złącze główkowe kasowania CMOS x1

Każde złącze obsługuje 2 porty USB na panelu

Złącze USB x2
przednim

Złącze zasilania (24 pinowe) x1

Złącze zasilania (4 pinowe) x1

Złącze Port drukarki x1 Każde złącze obsługuje 1 Port drukarki

Złącze Port szeregowy x1

Klawiatura PS/2 x1

Mysz PS/2 x1

Port VGA x1
Back Panel
Port LAN x1
I/O
Port USB x4

Gniazdo audio x3

Port DVI x1

Wymiary
182 mm (S) X 235 mm (W)
płyty

Funkcje
Obsługa RAID 0 / 1 / 1+0
specjalne

Obsluga
Biostar zastrzega sobie prawo dodawania lub
systemu
Windows XP / Vista / 7 odwoływania obsługi dowolnego systemu
operacyjne
operacyjnego bez powiadomienia.
go

41
Motherboard Manual

RUSSIAN
СПЕЦ
CPU
Гнездо AM3
(централь Архитектура AMD 64 разрешать обработка данных
Процессоры AMD Sempron / Athlon II /
ный на 32 и 64 бит
Phenom II
процессор Поддержка Hyper Transport 3.0
(Максимальный ватт: 95W)
)
Поддержка HyperTransport 3.0 с
FSB
пропускной способностью до 3.2 GT/s
Набор AMD RS780L
микросхем AMD SB710

Слоты DDR3 DIMM x 2 Модуль памяти с двухканальным режимом DDR3

Основная Максимальная ёмкость памяти 8ГБ Поддержка DDR3 800 / 1066 / 1333
память Каждый модуль DIMM поддерживает Не поддерживает зарегистрированные модули

512МБ/1ГБ/2ГБ/4ГБ DDR3 DIMM and ECC DIMM

Интерфейс с низким количеством выводов
ITE 8721
Инициативы по охране окружающей среды,
Обеспечивает наиболее используемые
Super I/O Аппаратный монитор
действующие функциональные
Функция ITE "Smart Guardian" (Интеллектуальная
возможности Super I/O.
защита)
Максимальная совместно используемая видео
Встроенная в набор микросхем AMD
Графика память составляет 512 МБ
RS780L
Поддержка DVI/HDCP
Встроенное устройство управления Режим "хозяина" шины Ultra DMA 33 / 66 / 100 / 133
IDE
встроенными интерфейсами устройств Поддержка режима PIO 0~4,
Встроенное последовательное скорость передачи данных до 3 гигабит/с.
SATA
устройство управления ATA Соответствие спецификации SATA версия 2.0.
Локальная Автоматическое согласование 10 / 100 Мб/с
Realtek RTL 8103EL
сеть Частичная / полная дуплексная способность
Звуковая
поддержка Звуковая поддержка High-Definition
ALC662
жесткого 5.1канальный звуковой выход
диска
Слот PCI Express Gen2 x16 x1
Слоты
Слот PCI x2
Встроенны Каждый разъём поддерживает 2 накопителя на
Разъём НГМД x1
й разъём гибких магнитных дисках
Каждый разъём поддерживает 2 встроенных
Разъём IDE x1
интерфейса накопителей
Разъём SATA x4 Каждый разъём поддерживает 1 устройство SATA

42
 A780L3L
СПЕЦ
Разъём на лицевой панели x1 Поддержка устройств на лицевой панели
Входной звуковой разъём x1 Поддержка звуковых функций на лицевой панели
Разъём вывода для S/PDIF x1 Поддержка вывода цифровой звуковой функции
Контактирующее приспособление Источник питания для вентилятора центрального
вентилятора центрального процессора (с функцией интеллектуального
процессора x1 вентилятора)
Контактирующее приспособление
Источник питания для вентилятора системы
вентилятора системы x1
Открытое контактирующее
приспособление CMOS x1
Каждый разъём поддерживает 2 USB-порта на
USB-разъём x2
лицевой панели
Разъем питания (24 вывод) x1
Разъем питания (4 вывод) x1
Разъём Порт подключения Каждый разъём поддерживает 1 Порт подключения
принтера x1 принтера
Разъём Последовательный порт x1
Клавиатура PS/2 x1
Мышь PS/2 x1
Задняя
Порт VGA x1
панель
Порт LAN x1
средств
USB-порт x4
ввода-выв
Гнездо для подключения
ода
наушников x3
Порт DVI x1
Размер
182 мм (Ш) X 235 мм (В)
панели
Специальн
ые
техническ
Поддержка RAID 0 / 1 / 1+0
ие
характери
стики
Biostar сохраняет за собой право добавлять или
Поддержк
Windows XP / Vista / 7 удалять средства обеспечения для OS с или без
а OS
предварительного уведомления.

43
‫‪Motherboard Manual‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫‪AM3‬ﻡﻘﺒﺲ‬

‫إﺟﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺑﻴﺔ ﺑﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺑﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬ ‫‪AMD Sempron / Athlon II‬ﻡﻌﺎﻟﺠﺎت‬ ‫وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ‬

‫و ‪Hyper Transport3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬ ‫‪Phenom II‬‬ ‫اﻟﻤﺮآﺰیﺔ‬

‫)و‪: 95‬ﻗﺼ ﻮى واط(‬

‫اﻟﻨﺎﻗﻞ اﻷﻣﺎﻣﻲ اﻟﺠﺎﻥﺒﻲ ‪ 3.2 GT/s‬ﺑﺘﺮدد یﺼﻞ إﻟﻰ‪HyperTransport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫‪AMD RS780L‬‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪AMD SB710‬‬

‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬ ‫‪ITE 8721‬‬

‫‪Super I/O‬‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺡﺎﻟﺔ اﻷﺟﻬﺰة‬ ‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬

‫‪ ITE‬ﻡﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬

‫ﻋﺪد‪2‬‬ ‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬

‫ﻡﺰدوﺟﺔ اﻟﻘﻨﺎة‪DDR3‬وﺡﺪة ذاآﺮة‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺟﻴﺠﺎ ﺑﺎیﺖ‬
‫ﺳﻌﺎت ‪ 1333 / 1066 / 800‬ﻡﻴﺠﺎ ﺑﺎیﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬ ‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫ﻡﻴﺠﺎ ﺑﺎیﺖ ‪ /512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻡﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫و‪ /1‬و‪ /2‬و‪ 4‬ﺟﻴﺠﺎ ﺑﺎیﺖ‬

‫ﻡﻴﺠﺎ ﺑﺎیﺖ‪512‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪیﻮ اﻟﻤﺸﺘﺮآﺔ‬

‫‪ AMD RS780L‬ﻡﺪﻡﺠﺔ ﻓﻲ رﻗﺎﺋﻖ‬ ‫ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت‬
‫‪DVI/HDCP‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫وﺿﻊ رﺋﻴﺴﻲ‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬

‫ﻡﺘﻜﺎﻡﻞ‪IDE‬ﻡﺘﺤﻜﻢ‬ ‫ﻡﻨﻔﺬ ‪IDE‬‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬

‫ﺟﻴﺠﺎﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ‬

‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬ ‫‪SATA‬‬
‫‪ 2.0.‬اﻹﺹﺪار ‪SATA‬ﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬

‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬

‫‪Realtek RTL 8103EL‬‬ ‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬
‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬

‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.1‬‬ ‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬

‫‪ALC662‬‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻡﻦ‬ ‫اﻟﺘﻌﺮیﻒ‬

‫ﻋﺪد ‪1‬‬ ‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬

‫اﻟﻔﺘﺤﺎت‬
‫ﻋﺪد‪2‬‬ ‫ﻓﺘﺤﺔ ‪PCI‬‬

‫یﺪﻋﻢ ﻡﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬ ‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬

‫‪IDE‬یﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺟﻬﺰة‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ‪IDE‬‬ ‫اﻟﻠﻮﺡﺔ‬

‫‪SATA‬یﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺡﺪ ﻡﻦ أﺟﻬﺰة‬ ‫ﻋﺪد‪4‬‬ ‫ﻡﻨﻔﺬ ‪SATA‬‬

‫‪44‬‬
 ‫‪A780L3L‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‬

‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺧﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬

‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫وﺹﻠﺔ ﻡﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬

‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺡﺔ اﻟﻨﻈﺎم‬ ‫ﻋﺪد ‪1‬‬ ‫وﺹﻠﺔ ﻡﺮوﺡﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪1‬‬ ‫وﺹﻠﺔ ﻡﺴﺢ ‪CMOS‬‬

‫ﺑﺎﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ‪USB‬یﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ‬ ‫ﻋﺪد ‪2‬‬ ‫ﻡﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﻮس(‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬ ‫ﻟﻮﺡﺔ ﻡﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ‪VGA‬‬
‫ﻡﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬
‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬
‫اﻟﻠﻮﺡﺔ اﻟﺨﻠﻔﻴﺔ‬
‫ﻋﺪد‪4‬‬ ‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻋﺪ‪3‬‬ ‫ﻡﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﺎﻓﺬ ‪DVI‬‬

‫‪ 182‬ﻡﻢ )ﻋﺮض( ‪ 235 X‬ﻡﻢ )ارﺗﻔﺎع(‬ ‫ﺡﺠﻢ اﻟﻠﻮﺡﺔ‬

‫‪RAID 0 / 1 / 1+0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬ ‫ﻡﺰایﺎ ﺥﺎﺹﺔ‬

‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬

‫‪Windows XP / Vista / 7‬‬ ‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫ﺑﺪون إﺥﻄﺎر‪.‬‬

‫‪45‬‬
Motherboard Manual

JAPANESE
仕様

Sockel AM3 AMD 64アーキテクチャでは、32ビットと64ビット計算が可

AMD Sempron / Athlon II / Phenom II プロセッ 能です

CPU
サ ハイパートランスポート3.0とクールアンドクワイアットを

(最高のワット: 95W) サポートします

3.2 GT/sのバンド幅までハイパートランスポ
FSB
ート3.0をサポートします

チップセッ AMD RS780L

ト AMD SB710

DDR3 DIMMスロット x 2
デュアル チャンネルモードDDR3メモリモジュール
メインメモ 最大メモリ容量8GB
DDR3 800 / 1066 / 1333 をサポート
リ 各DIMMは 512MB/1GB/2GB/4GB DDR3
登録済みDIMMとECC DIMMはサポートされません
をサポート

低ピンカウントインターフェイス
ITE 8721
環境コントロールイニシアチブ、
Super I/O もっとも一般に使用されるレガシーSuper I/O
H/Wモニター
機能を採用しています。
ITEの「スマートガーディアン」機能

グラフィッ 最大の共有ビデオメモリは512MBです
AMD RS780Lチップセットに統合
クス DVI/HDCPのサポート

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

IDE 統合IDEコントローラ
PIO Mode 0~4のサポート、

最高3Gb/秒のデータ転送速度
SATA 統合シリアルATAコントローラ
SATAバージョン2.0仕様に準拠。

10 / 100 Mb/秒のオートネゴシエーション
LAN Realtek RTL 8103EL
半/全二重機能

HDオーディ
5.1チャンネルオーディオアウト
オのサポー ALC662
ハイデフィニションオーディオのサポート
ト

PCI Express Gen2 x16スロット x1

スロット
PCIスロット x2

オンボード フロッピーコネクタ x1 各コネクタは2つのフロッピードライブをサポートします

コネクタ IDEコネクタ x1 各コネクタは2つのIDEデバイスをサポートします

SATAコネクタ x4 各コネクタは1つのSATAデバイスをサポートします

46
 A780L3L
仕様

フロントパネルコネクタ x1 フロントパネル機能をサポートします

フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします

S/PDIFアウトコネクタ x1 デジタルオーディオアウト機能をサポートします

CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載)

システムファンヘッダ x1 システムファン電源装置

CMOSクリアヘッダ x1

各コネクタは2つのフロントパネルUSBポートをサポートし
USBコネクタ x2
ます

電源コネクタ(24ピン) x1

電源コネクタ(4ピン) x1

プリンタポートコネクタ x1 各コネクタは1つのプリンタポートをサポートします

シリアルポートコネクタ x1

PS/2キーボード x1

PS/2マウス x1

VGAポート x1
背面パネル
LANポート x1
I/O
USBポート x4

オーディオジャック x3

DVIポート x1

ボードサイ
182 mm (幅) X 235 mm (高さ)
ズ

特殊機能 RAID 0 / 1 / 1+0 のサポート

Biostarは事前のサポートなしにOSサポートを追加または削
OSサポート Windows XP / Vista / 7
除する権利を留保します。

2011/10/03

47