Scribd
Upload
112 views5 pages

Material Take Off (MTO) For Grounding & Lightning Protection

The document is a material take-off for grounding and lightning protection systems for a LNG regasification terminal project in Cilacap, Indonesia. It lists the required materials including grounding electrodes, wires, connectors, conduits, and other accessories. The owner of the project is PT PGN and the contractor is PT PP. The material take-off provides descriptions, quantities, units, and remarks for each item needed for the grounding and lightning protection systems.

Uploaded by

Rince Oktaviana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views5 pages

Material Take Off (MTO) For Grounding & Lightning Protection

The document is a material take-off for grounding and lightning protection systems for a LNG regasification terminal project in Cilacap, Indonesia. It lists the required materials including grounding electrodes, wires, connectors, conduits, and other accessories. The owner of the project is PT PGN and the contractor is PT PP. The material take-off provides descriptions, quantities, units, and remarks for each item needed for the grounding and lightning protection systems.

Uploaded by

Rince Oktaviana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Doc No.

21009-PP-000-ELE-MTO-007
Rev.
Job No. : XXXX
0

Material Take Off (MTO) for Grounding &


Lightning Protection

PROJECT : Proyek EPC Terminal Regasifikasi LNG Cilacap

OWNER : PT. PGN Tbk


CONTRACTOR : PT.PP (Persero)
LOCATION : Cilacap, Jawa Tengah

A 25 Sep 21 FOR INFORMATION SUN/ROS CDW/SAW HGW

REV. DATE DESCRIPTION PREPARED CHECKED APPROVED

THIS VOLUME EMBODIES PROPRIETARY INFORMATION OF PT. PP PERSERO. THIS VOLUME OR THE MATERIAL DESCRIBED THEREON MAY NOT
BE COPIED OR DISCLOSED IN ANY FORM OR MEDIUM TO THIRD PARTIES, OR USED FOR OTHER THAN THE PURPOSE FOR WHICH IT HAS BEEN
PROVIDED, IN WHOLE OR IN PART IN ANY MANNER EXCEPT AS EXPRESSLY PERMITTED BY PT. PP PERSERO.
Doc No. 21009-PP-000-ELE-MTO-007
Rev.
Job No. : XXXX
B

HOLD LIST

NO. PARAGRAPH HOLD CONTENT


Doc No. 21009-PP-000-ELE-MTO-007
Rev.
Job No. : XXXX
0

REVISION LOG

REV. NO. DATE PAGE DESCRIPTION


A 25 Sep 21 FOR INFORMATION
PROJECT NO : REV
21009-PP-000-ELE-MTO-
DOC NO : B
MATERIAL TAKE OFF FOR GROUNDING SYSTEM 007
DATE PREPARED BY APPROVED BY
9 sep 2021 sun KASIE

NO. DESCRIPTION TOTAL UNIT REMARKS

A GROUNDING SYSTEM
1 GROUNDING ELECTRODE RODS 95 Pcs
MATERIAL : Copper
DRIVEN TYPE
(B) DIMENSION : 20mm ∅ X 3000mmL
(20mm Dia. 3000mm Length)

2 ELECTRODE INSPECTION PIT (C/W COVER AND NAMEPLATE) 95 Pcs


MATERIAL : POLYMER

3 GROUNDING ELECTRODE WIRE CLAMP


C/w 3/4" dia. M8 U-Bolt, 2ea nuts, 2ea Flat & Spring Washer
Size :
240 mm² 95 Set
120 mm²
95 mm²

4 GROUNDING WIRE CONNECTOR ("C" SLEEVE COMPRESSION TYPE)


Size :
240 mm² - 240 mm² 56 Set
240 mm² - 120mm²
70 mm² - 70 mm²
25 mm² - 25 mm²
16 mm² - 16 mm²

5 WELD METAL (EXOTHERMIC WELDING)


MIXTURE OF COPPER OXIDE AND ALUMINUM AND
C/W STARTING POWDER, METAL DISK
Size :
240 mm² - 240 mm² - 240 mm² - 240 mm², 1 box = 10 Tube 0 Box
120 mm² - 120 mm² - 120 mm² - 120 mm², 1 box = 10 Tube
70 mm² - 70 mm² - 70 mm² - 70 mm², 1 box = 10 Tube

6 Bolt & Nut


Hexagonal bolt M10 C/W washer, nut, spring washer (galvanis) 0 Set
Hexagonal bolt M12 C/W washer, nut, spring washer (galvanis) 0 Set

7 CABLE LUG (COMPRESSION TYPE) HOTDIP GALVANIZED


C/W BOLT, NUTT, AND WASHER M12
Size :
240 mm² x M12 300 set
95 mm² x M12
35 mm² x M12 250
16 mm² x M10 300

8 GROUNDING BAR 33 Set


MATERIAL : COPPER BAR
FINISH : TINNING 35
DESCRIPTION AND REMARKS
(A) 450mmL X 50mmW X 10mmT
(B) C/W 2 SETS INSULATOR (1kV)
(C) C/W SUPPORT Mounting in structure/floor

B CONDUIT
1 CONDUIT GALVANIS
FINISH : CORROSION RESISTANCE
Size :
25 mm x 3000 mm , per 3000mm/btg 7 btg

Accessories
2 SADLE CLAMP 25 mm Galvanis DIA. (TWO HOLES) HOLE SIZES : M4 50 Pcs
3 SCREW M4 C/W FISHER FOR SADDLE CLAMP 100 Pcs
4 SEALING COMPOUND (NON HARDENING TYPE) 1Lb 15 Pcs
PROJECT NO : REV
DOC NO : 21009-PP-000-ELE-MTO-007 A
MATERIAL TAKE OFF FOR LIGHTNING PROTECTION SYSTEM
DATE PREPARED BY APPROVED BY
9 sep 2021 SUN KASIE

LIGHTNING PROTECTION Total Ground


NO. DESCRIPTION UNIT Note REMARKS
SYSTEM AREA System Area

A LIGHTNING PROTECTION OVERALL AREA

1 Air Terminal Conventional 16mm x 600mm ( as per IEC 62305-3) 117 117 SET EPC Stage 1
Material = Copper

2 Air Terminal Base 16mm 117 117 SET


Material : Brass
Finishing : Copper Coating, SS304

3 Air Terminal Non-Conventional Type (Early Streamer Emission),ΔT 60 µs 4 4 Set


Protection Level 1, Protection Radius (Rp) minimal 35 meter,
NFC 17-102 Standard coplete with pole and accessories
C/w Pole and supporting accessories

4 Lightning Counter 33 33 set


Trip Threshold shall be 2 kA 8/20 s, 100 kA 10/350 s, with no power supply required

5 Isolating Spark Gap


B GROUNDING SYSTEM
1 GROUNDING ELECTRODE 33 33 Ea
MATERIAL : Copper Clad Steel ( UL Certified or equivalent )
DRIVEN TYPE c/w Coupling
(B) DIMENSION : ¾ inch diameter ∅ X 6000mmL
(3/4 inch Dia. 6000mm Length)

2 ELECTRODE INSPECTION PIT (C/W PLAT COVER AND NAMEPLATE) 33 33 Ea


MATERIAL : Reinforced Concrete 40 cmx40cmx40cm

3 GROUNDING ELECTRODE WIRE CLAMP


C/w 3/4" dia. M8 U-Bolt, 2ea nuts, 2ea Flat & Spring Washer
Size :
240 mm²
50 mm² 33 33 Ea

4 Transient Earthing Clamp (TEC) 33 33 Ea

5 CLAMP
C-Clamp 161 161 Ea
Cable Support Clamp 120mm2 c/w Isolator 1239 1239 Ea

6 Grounding Testing Joint Box Min IP 56 33 33 Set


IP66 200mm x 150mm x 100mm

7 Bolt & Nut


hexagonal bolt M12 C/W washer, nut, spring washer (galvanis) 566,4 566,4 Ea
Dynabolt M8 x50mm 120 120 Ea

8 CABLE LUG (COMPRESSION TYPE)


C/W BOLT, NUTT, AND WASHER M12
Size :
50 mm² x M12 110 110 Ea

9 TERMINAL COPPER BAR FOR TESTING JOINT BOX 31 31 Ea


MATERIAL : COPPER BAR
FINISH : TIN COATED

D CONDUIT
1 PVC CONDUIT HIGH IMPACT AW CLASS
MATERIAL : RIGID PLASTIC
FINISH : CORROSION RESISTANCE
Size :
AW CLASS 1" , per 3000mm/btg 71,5 71,5 Batang

Accessories for PVC Conduit


SADLE CLAMP 1" DIA. (TWO HOLES) HOLE SIZES : M4 165 165 Pcs
SCREW M4 C/W FISHER FOR SADDLE CLAMP 330 330 Pcs
SEALING COMPOUND (NON HARDENING TYPE) 1Lb 11 11 Pcs

You might also like