USER MANUAL

Fingerprint Secure USB Drive

1907
 EN

Dear user

Thank you for selecting the Verbatim Fingerprint Secure USB Drive as your external
data storage device.
For optimal use and performance we advise you to read this manual carefully before using
this product.
Please note: this manual is a general manual which is used for several Verbatim products.
Product pictures shown in this manual may differ from the device you purchased.

Contents of the box

Please check the contents of the box. All articles included in this box are listed on the
back of the packaging.

Need assistance? Have questions?

If you have a question concerning this product, need information on other Verbatim
products or require technical assistance, please contact the Verbatim Support
Centre. Please visit www.verbatim.com/support for details.

Warning!
All rights reserved. The products named in this manual are only used for
identification purposes and may be trademarks or registered trademarks of the
respective companies. This device was designed for home or office use.
Warning! This device is equipment complying with EN55032 class A. This
equipment can cause radio disturbances in a residential area. If this is the case, the
user has to take appropriate measures and assume all responsibility and costs for.
It may not be used near or with any life-sustaining systems.
Verbatim cannot be made liable for any damages, loss of data or damage following
thereof -whatsoever (including, without limitation, damages for loss of business
profits, business interruption, loss of business information, or other pecuniary loss)
arising out of the use of or inability to use this Verbatim product, even if Verbatim
has been advised of the possibility of such damages.
We reserve the right to upgrade our products in keeping with technological
advances.

2
 EN

Table of Contents

General Information....................................................................................................page 4

Chapter 1
Setting up an Administrator using Fingerprint Secure User Manager Software..........page 5

Chapter 2
Adding / removing / editing username or privileges using
Fingerprint Secure User Manager Software...............................................................page 7

Chapter 3
Accessing the Secure Partition without using the Fingerprint Secure Software..........page 8

Chapter 4
Accessing the Secure Partition using the Fingerprint Secure Software .....................page 9

Rights .....................................................................................................................................page 10
FCC Compliance ..................................................................................................................page 11
WEEE Notice .........................................................................................................................page 11
CE Declaration ......................................................................................................................page 12
RoHS Compliance ................................................................................................................page 12

3
 EN

General Information

Features:

• Supports USB Super-speed (5Gbps) / High-speed (480Mbps) / full-speed (12Mbps)

operation
• Supports Windows 7 / 8 / 10, Mac OS X 10.4 or higher
• Includes 256-bit AES Hardware Encryption
• Fingerprint recognition to prevent unauthorised users accessing your data

Specifications:

• Interface: USB 3.0

System Requirements:

PC:
• Minimum Intel Processor Pentium II/50MHz, 64MB RAM
• Windows 7 / 8 / 10
• Active USB port

MAC:
• Minimum Apple G processor, 64MB RAM
• Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3
• Active USB port

Package Contents:

• Verbatim Fingerprint Secure USB Drive

• User Manual (pre-loaded to the drive)

4
 EN

Chapter 1: Setting up an Administrator using Fingerprint

Secure User Manager Software

1. Connect Fingerprint Secure to your PC. A removable disk ("Fingerprint Secure") and
a Virtual DVD RW Drive ("DVD RW Drive") will appear in "My Computer". The Virtual
DVD RW Drive is an undeletable partition on your Fingerprint Secure on which the
Fingerprint Secure software and user manuals are stored.

2. If the virtual DVD-RW drive does not automatically open after the Fingerprint Secure
has been connected, double-click on the Virtual CD ROM drive icon ("CD ROM Drive")
to open it.

3. Double-click on the Fingerprint Secure User Manager application icon. When the
application opens you will be asked to set up an administrator password. This
password is a backup access method for the administrator.

5
 EN

4. You will be asked to enrol an administrator fingerprint. Enter the user name and select
Read Only if the administrator will not be able to make changes to data stored in
the secure partition. Gently press your finger on the sensor and release, then press
again. Tilt and roll your finger slightly each time and keep pressing until the process is
complete.

5. If the administrator’s fingerprint is correctly enrolled you will see the user name in the
table of authorised users.

6
 EN

Chapter 2: Adding / removing / editing username or privileges

using Fingerprint Secure User Manager Software

1. Open the Fingerprint Secure User Manager application as outlined in steps 1-3 of the
previous section. Note, adding/removing/editing a user is only possible if you are a
registered Administrator.

2. To add a user click the + symbol and follow the same sequence as registering the
Administrator’s fingerprint

3. To remove a user, select the username in the table of authorised users and click the –
symbol.

4. To edit a username or change their privileges, select the username in the table of
authorised users and click the pencil symbol.

Overview of User Privileges:

Administrator:
You can only use the “Fingerprint Secure User Manager” software if you are an
administrator.

Read Only:
User can only read data in the secure partition and is are not able to add, change
delete files.

7
 EN

Chapter 3: Accessing the Secure Partition without using the

Fingerprint Secure Software

1. Connect Fingerprint Secure to your PC and wait until the LED stops flashing.

2. Gently put your finger on the sensor. If the secure partition will doesn’t open
automatically, try again touching a different part of your fingerprint on the sensor.

3. Double click the secure partition file folder in “My Computer” to access the secure
data.

8
 EN

Chapter 4: Accessing the Secure Partition using the

Fingerprint Secure Software

1. Connect Fingerprint Secure to your PC and open the Fingerprint Secure application.

2. Gently put your finger on the sensor. If the fingerprint is recognised the software will
display a tick and the secure partition will open.

3. If the fingerprint is not recognised the software will display an X. Try again touching a
different part of your fingerprint on the sensor.

9
 EN

Rights

Copyright © 2019 Verbatim GmbH. No part of this document may be reproduced in any
form or by any means, for any purpose, without the express written permission of Verbatim
GmbH. All rights reserved.
All other brands and product names referenced herein are property of their respective
owners.

Note

Verbatim GmbH may at any time revise the content of this user guide without
further notice.

10
 EN

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

WEEE Notice

The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into
force as European law on 13th February 2003, resulted in a major change in the treatment
of electrical equipment at end-of-life.

The WEEE logo (shown at the left) on the product or on its box
indicates that this product must not be disposed of or dumped with
your other household waste. For more information about electronic
and electrical waste equipment disposal, recovery, and collection
points, please contact your local municipal household waste disposal
service or shop from where you purchased the equipment.

11
 EN

CE Declaration

Complied the requirements set out in the Council Directive on the Approximation of the
Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EC) and
Low Voltage Protection 2006/95/EC.

This declaration applies to all specimens manufactured identical to the model submitted
for testing/evaluation.

EN 55032:2012+ AC:2013 (Class B)

EN 61000-3-2:2014
EN 61000-3-3:2013
AS/NZS CISPR 32:2013
EN 55024:2010
IEC 61000-4-2: 2008
IEC 61000-4-3: 2006+ A1:2007+ A2:2010
IEC 61000-4-4: 2013
IEC 61000-4-5: 2014
IEC 61000-4-6: 2013
IEC 61000-4-8: 2009
IEC 61000-4-11: 2004

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the European Parliament

and of the Council of 18 December 2006 , on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
Substances of Very High Concern (SVHC) including 169 substances contained in
Candidate List of June 20th 2016 are not present in this product range above permitted
levels.

12