Scribd
Upload
267 views1 page

Install Instructions Sierra XP 3.3.3 Website Download

The document provides instructions for downloading and installing Sierra XP 3.3.3 software from a self-extracting zip file, which will create a folder containing Setup.exe and folders for firmware and help updates. It describes running Setup.exe to start the installation, then updating the base unit firmware by running batch files to copy new files and a firmware update program, and updating help topics by running another batch file.

Uploaded by

Jose Hernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
267 views1 page

Install Instructions Sierra XP 3.3.3 Website Download

The document provides instructions for downloading and installing Sierra XP 3.3.3 software from a self-extracting zip file, which will create a folder containing Setup.exe and folders for firmware and help updates. It describes running Setup.exe to start the installation, then updating the base unit firmware by running batch files to copy new files and a firmware update program, and updating help topics by running another batch file.

Uploaded by

Jose Hernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Install Instructions

Sierra XP 3.3.3 Website Download


The download is a single self-extracting zip file that has been password
protected. Double-click on the downloaded file to start the extraction process.

After entering the password the file will be unzipped and a folder called "Sierra
3.3.3" will be created in the same location as the downloaded file. Inside this
folder is the normal "Setup.exe" file which can be launched to start the Sierra XP
software installation.

Also included is a DSP and Help folder. These folders contain the most recent
version of the base unit firmware (1.94) and Help Topics.

To Install the Sierra XP Software:


1. Double-click on the Setup.exe file. The Install Utility window will be
displayed.
2. Click on the Install Sierra XP Version 3.3.3 button and follow the on-
screen instructions.

To Update the Base Unit Firmware:


1. Open the DSP folder.
2. Double-click on the file “CopyFiles.bat”. This will copy the new firmware
files to the C:\Cadwell\Sierrawin folder on the hard disk drive.
3. Open My Computer and go to the C:\Cadwell\Sierrawin folder.
4. Double-click on the file called “UpdateController” . This will install the
new firmware in the base unit.
5. After the install is complete, turn OFF the base unit for a few seconds,
then turn the base unit back ON.
6. Start the Sierra XP program and verify the base version number by select
About Sierrawin from the Help menu. The version number should be 1.94.

To Update the Help Topics:


1. Open the Help folder.
2. Double-click on the file “UpdateHelp.bat”. This will copy the updated
help topics to the C:\Cadwell\Sierrawin folder on the hard disk drive.

You might also like