User Guide

HP DeskJet 2700 All-in-One series

HP company notices

THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE.

ALL RIGHTS RESERVED. REPRODUCTION, ADAPTATION, OR TRANSLATION OF THIS MATERIAL IS PROHIBITED WITHOUT PRIOR WRITTEN PERMISSION OF
HP, EXCEPT AS ALLOWED UNDER THE COPYRIGHT LAWS. THE ONLY WARRANTIES FOR HP PRODUCTS AND SERVICES ARE SET FORTH IN THE EXPRESS
WARRANTY STATEMENTS ACCOMPANYING SUCH PRODUCTS AND SERVICES. NOTHING HEREIN SHOULD BE CONSTRUED AS CONSTITUTING AN ADDITIONAL
WARRANTY. HP SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN.

© Copyright 2020 HP Development Company, L.P.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Mac, OS X, macOS, and AirPrint are trademarks of Apple Inc., registered in the U.S. and other countries.

ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency.

Android and Chromebook are trademarks of Google LLC.

Amazon and Kindle are trademarks of Amazon.com, Inc. or its affiliates.

iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Safety information

Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock.

- Read and understand all instructions in the documentation that comes with the printer.

- Observe all warnings and instructions marked on the product.

- Unplug this product from wall outlets before cleaning.

- Do not install or use this product near water, or when you are wet.

- Install the product securely on a stable surface.

- Install the product in a protected location where no one can step on or trip over the line cord, and the line cord cannot be damaged.

- If the product does not operate normally, see Solve a problem on page 77.

- There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
Table of contents

1 Printer parts ................................................................................................................................................. 1

Printer overview ..................................................................................................................................................... 2
Control panel features ........................................................................................................................................... 4
Control panel lights and display icons status ....................................................................................................... 7
Print reports from control panel ........................................................................................................................... 9

2 Load media and paper basics ........................................................................................................................ 11

Load media .......................................................................................................................................................... 12
Load original ........................................................................................................................................................ 15
Change the default paper size detected by printer ............................................................................................. 16
Paper basics ......................................................................................................................................................... 17

3 Connect your printer .................................................................................................................................... 19

Connect using the HP Smart app ......................................................................................................................... 20
Connect to a wireless network with a router ...................................................................................................... 21
Connect wirelessly without a router .................................................................................................................... 23
Wireless settings ................................................................................................................................................. 26
Tips for setting up and using a wireless printer .................................................................................................. 27
Connect your printer to your computer with a USB cable (non-wireless connection) ....................................... 28
Change the connection type ................................................................................................................................ 29

4 Printer management tools ........................................................................................................................... 31

Use the HP Smart app to print, copy, scan, and troubleshoot ............................................................................ 32
Open the HP printer software (Windows) ............................................................................................................ 33
Toolbox (Windows) .............................................................................................................................................. 34
Embedded web server (EWS) ............................................................................................................................... 35
Sleep mode .......................................................................................................................................................... 37
Quiet Mode ........................................................................................................................................................... 38
Auto-Off ............................................................................................................................................................... 39
Update the printer ............................................................................................................................................... 40

ENWW iii
 5 Print ........................................................................................................................................................... 41
Print using the HP Smart app .............................................................................................................................. 42
Print from mobile devices .................................................................................................................................... 44
Print using a computer ........................................................................................................................................ 45
Tips for print success ........................................................................................................................................... 49

6 Manage cartridges ....................................................................................................................................... 51

Information on cartridges and the printhead ..................................................................................................... 52
Check estimated ink levels .................................................................................................................................. 53
Order ink supplies ................................................................................................................................................ 54
HP Instant Ink ....................................................................................................................................................... 55
Replace cartridges ............................................................................................................................................... 56
Use single cartridge mode ................................................................................................................................... 58
Cartridge warranty information .......................................................................................................................... 59
Tips for working with cartridges ......................................................................................................................... 60

7 Copy, scan, and mobile fax ............................................................................................................................ 61

Copy and scan using HP Smart ............................................................................................................................ 62
Copy from the printer .......................................................................................................................................... 64
Scan using HP printer software ........................................................................................................................... 65
Scan using Webscan ............................................................................................................................................ 68
Tips for copy and scan success ............................................................................................................................ 69
Mobile Fax ............................................................................................................................................................ 70

8 Use Web Services ......................................................................................................................................... 71

What are Web Services? ....................................................................................................................................... 72
Set up Web Services ............................................................................................................................................. 73
Print with HP ePrint ............................................................................................................................................. 74
Remove Web Services .......................................................................................................................................... 75

9 Solve a problem ........................................................................................................................................... 77

Get help from the HP Smart app ......................................................................................................................... 78
Get help in this guide ........................................................................................................................................... 78
HP support ........................................................................................................................................................... 97

10 HP EcoSolutions (HP and the Environment) .................................................................................................. 99

Energy Save Mode ............................................................................................................................................. 100

Appendix A Technical information ................................................................................................................. 101

HP Company notices .......................................................................................................................................... 102

iv ENWW
 Specifications ..................................................................................................................................................... 103
Regulatory notices ............................................................................................................................................. 105
Environmental stewardship program ............................................................................................................... 110

Index ........................................................................................................................................................... 119

ENWW v
vi ENWW
1 Printer parts

● Printer overview

● Control panel features

● Control panel lights and display icons status

● Print reports from control panel

ENWW 1
 Printer overview
● Top and front view

● Back view

Top and front view

1 Paper-width guide

2 Input tray

3 Input tray shield

4 Scanner lid

5 Scanner glass

6 Output tray extender (also referred to as the tray extender)

7 Output tray

8 Cartridges

9 Cartridge access door

10 Control panel

2 Chapter 1 Printer parts ENWW

Back view

1 Power connection

2 USB port

ENWW Printer overview 3

 Control panel features
Overview of buttons and lights

Feature Description

1 Power button: Turns the printer on or off.

2 Control panel display : Indicates number of copies, wireless status and signal strength, Wi-Fi Direct status,
warnings or errors, and ink levels.

3 Ink Alert light: Indicates low ink or cartridge problems. For more information, see Control panel error codes
and status on page 92.

4 Cancel button: Stops the current operation.

5 Resume button: Resumes a job after a disruption (for example, after loading paper or clearing a paper jam).

Resume light: Indicates the printer is in a warning or error state. For more information, see Control panel
error codes and status on page 92.

4 Chapter 1 Printer parts ENWW

 Feature Description

6 Wireless button: Turns on or off the printer wireless capabilities.

Wireless light: Indicates whether the printer is connected to a wireless network.

7 Information button: Prints out a printer information page on its current status.

Information light: If the light is blinking in white and the Wi-Fi Direct icon on the display is blinking fast at
the same time, press the Information button to confirm a connection.

If it is amber (possibly blinking), it indicates an HP Instant Ink warning or error. Press the button to print an
information page, check the HP Instant Ink section for diagnostic results, and then follow the instructions
on the page.

NOTE: HP Instant Ink service is not available in all countries. To check availability, visit hpinstantink.com.

8 Start Copy Color button: Starts a color copy job. To increase the number of color copies, press the button
multiple times quickly.

9 Start Copy Black button: Starts a black-and-white copy job. To increase the number of black-and-white
copies, press the button multiple times quickly.

Control panel display icons

Icon Description

Number of copies icon: 1-digit counter showing the number of copies when you are copying
documents. The maximum count is nine.

When the letter E is displayed to the left side of the counter, it indicates the printer is in an error state.
For more information, see Control panel error codes and status on page 92.

Error icon: Indicates a warning or an error.

Paper Error icon: Indicates a paper-related error.

ENWW Control panel features 5

 Icon Description

Wireless status icons: Show the status of a wireless connection.

The wireless status icons consist of two icons, the Wireless Attention icon ( ) and the Signal Bars icon

( ).

Wi-Fi Direct icon: Indicates the current Wi-Fi Direct status.

● If the Wi-Fi Direct icon is on, Wi-Fi Direct is ready for use.

● If the Wi-Fi Direct icon is off, press and hold the Wireless button ( ) and the Resume button

( ) together for three seconds to turn it on.

● If the Wi-Fi Direct icon is blinking in sync with the white blinking Information light, the Wi-Fi
Protected Setup (WPS) push button mode is in progress. Press the Information button ( )

within two minutes to connect.

● If the Wi-Fi Direct icon is blinking fast in sync with the blinking Error ( ) icon for three seconds,
and then stays on, Wi-Fi Direct has reached the maximum of five connections.

● If the Wi-Fi Direct icon is blinking fast in sync with the blinking Error ( ) icon for three seconds,
and then turns off, Wi-Fi Direct is disabled by your network administrator.

Instant Ink icon: Indicates the printer is enrolled in the HP Instant Ink replacement service. If blinking,
indicates an HP Instant Ink warning or error.

Press the Information button ( ) to print an information page, check the HP Instant Ink section for

diagnostic results, and then follow the instructions on the page.

Ink Level icons: The left ink icon shows the estimated ink level of the tri-color cartridge, and the right
icon shows the estimated ink level of the black cartridge.

NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you
receive a low-ink warning message, consider having a replacement cartridge available to avoid
possible printing delays. You do not need to replace cartridges until the print quality becomes
unacceptable.

6 Chapter 1 Printer parts ENWW

Control panel lights and display icons status
Power button light

●
Status Description

On The printer is on.

Off The printer is powered off.

Dimmed The printer is in Sleep mode. The printer automatically enters Sleep mode after five minutes of
inactivity.

Blinking
The printer is processing a job. To cancel the job, press the Cancel button ( ).

Blinking fast If the cartridge access door is open, close it. If the cartridge access door is closed and the light
is blinking fast, the printer is in an error state that you can resolve by following the on-screen
messages on the device you are printing from. If you do not see any onscreen messages, try
printing a document to generate an on-screen message.

Wireless light and icons

● The light next to the Wireless button ( ) and the wireless status icons on the display work together
to indicate the status of a wireless connection.

Status Description

The light next to the Wireless button is glowing steady blue The printer is connected to a wireless network. The Signal Bars
and the Signal Bars icon is visible on the display. indicate the wireless signal strength of the network that the
printer is connected to.

The Wireless light and the Wireless status icons are off. The wireless capability of the printer is off. To turn on the
wireless capability, press the Wireless button ( ).

The light next to the Wireless button is blinking blue and the The printer is in Auto Wireless Connect setup mode.
Signal Bars on the display are cycling.

ENWW Control panel lights and display icons status 7

 Status Description

The light next to the Wireless button and the Signal Bars on The printer is in the Wi-Fi Protected Setup (WPS) progress
the display are blinking together in sync. mode.

The light next to the Wireless button blinks fast three times The wireless capability of the printer is disabled.
and then returns to its prior state.
Change the wireless settings. For more information, see
Wireless settings on page 26.

During the wireless setup, the light next to the Wireless There is no wireless signal.
button is blinking, the Wireless Attention icon is on, and the
Signal Bars are cycling. – Make sure your wireless router or access point is
powered on.

– Move the printer closer to the wireless router.

The Wireless Attention icon on the display is blinking in sync The printer has a problem connecting to the wireless network.
with the light next to the Wireless button
Press the Wireless button ( ) and the Information button

( ) together to run the wireless test, and then review the

test report for information on how to solve the problem.

8 Chapter 1 Printer parts ENWW

Print reports from control panel
Printer report How to print Description

Printer Printer Information Page provides a summary of the

Press the Information button ( ).
Information printer information and its current status.
Page

Printer Status Printer Status Report provides the current printer

Press and hold the Cancel button ( ) for three
Report information, cartridge status, or recent events. It can
seconds. also help troubleshooting printer problems.

Wireless Wireless Network Test Report shows the diagnostics

Press the Wireless button ( ) and the Information
Network Test results for the status of the wireless network, wireless
Report and signal strength, detected networks, and more.
Network button ( ) at the same time.
Configuration Network Configuration Page shows the network status,
Page hostname, network name, and more.

Wireless Quick Wireless Quick Start Guide provides the step-by-step

Press and hold the Information button ( ) for three
Start Guide instructions to help you set up the wireless connection.
seconds.

Wi-Fi Direct Wi-Fi Direct Guide provides the instructions to help you
Press the Information button ( ) and Resume
Guide set up and use Wi-Fi Direct.

button ( ) at the same time.

Web Services Depending on Web Services status, Web Services

Press the Information button ( ) and Cancel
Reports Reports provide different instructions to help you turn
on Web Services, set up Web Services, or fix connection
button ( ) at the same time. issues, and more.

WPS Pin Code The WPS Pin Code Page provides the PIN code for a WPS
Press and hold the Information button ( ) and the
Page connection.

Wireless button ( ) at the same time for three

seconds.

ENWW Print reports from control panel 9

10 Chapter 1 Printer parts ENWW
2 Load media and paper basics

● Load media

● Load original

● Change the default paper size detected by printer

● Paper basics

ENWW 11
 Load media
To load paper

1. Raise the input tray.

2. Slide the paper-width guide to the left.

3. Insert a stack of paper into the input tray with the short edge down and the print side up, and slide the
stack of paper down until it stops.

12 Chapter 2 Load media and paper basics ENWW

 4. Slide the paper-width guide to the right until it stops at the edge of the paper.

5. Lower the output tray and pull out the output tray extender.

To load envelopes

1. Raise the input tray.

2. Slide the paper-width guide to the left.

ENWW Load media 13

 3. Insert one or more envelopes into the far-right side of the input tray and slide the stack of envelopes
down until it stops. The side to be printed on should face up.

4. Slide the paper-width guide to the right against the stack of envelopes until it stops.

5. Lower the output tray and pull out the output tray extender.

14 Chapter 2 Load media and paper basics ENWW

Load original
To load an original on the scanner glass

1. Lift the scanner lid.

2. Load your original print-side down and align it with the marking on the front-right corner of the glass.

3. Close the scanner lid.

ENWW Load original 15

 Change the default paper size detected by printer
The printer can automatically detect whether the input tray has paper loaded and detect whether the loaded
paper is large, small, or medium width. You can change the default large, medium, or small paper size
detected by the printer.

To change the default paper size detected by the printer

1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 35.

2. Click the Settings tab.

3. In the Preferences section, click Tray and Paper Management, and then select the desired option.

4. Click Apply.

16 Chapter 2 Load media and paper basics ENWW

Paper basics
The printer is designed to work well with most types of office paper. It is best to test a variety of print paper
types before buying large quantities. Use HP paper for optimum print quality. Visit the HP website at
www.hp.com for more information about HP paper.

HP recommends plain papers with the ColorLok logo for printing everyday documents. All
papers with the ColorLok logo are independently tested to meet high standards of
reliability and print quality, and produce documents with crisp, vivid color, bolder blacks,
and that dry faster than ordinary plain papers. Look for papers with the ColorLok logo in
a variety of weights and sizes from major paper manufacturers.

ENWW Paper basics 17

18 Chapter 2 Load media and paper basics ENWW
3 Connect your printer

● Connect using the HP Smart app

● Connect to a wireless network with a router

● Connect wirelessly without a router

● Wireless settings

● Tips for setting up and using a wireless printer

● Connect your printer to your computer with a USB cable (non-wireless connection)

● Change the connection type

ENWW 19
 Connect using the HP Smart app
To set up using the HP Smart app

You can use the HP Smart app to set up the printer on your wireless network. The HP Smart app is supported
on iOS, Android, Windows, and Mac devices. For information about this app, see Use the HP Smart app to
print, copy, scan, and troubleshoot on page 32.

1. Make sure your computer or mobile device is connected to your wireless network and you know the Wi-Fi
password of your wireless network.

2. If you are using an iOS or Android mobile device, make sure that Bluetooth is turned on. (HP Smart uses
Bluetooth to make the setup process faster and easier on iOS and Android mobile devices.)

NOTE: HP Smart uses Bluetooth for printer setup only. Printing using Bluetooth is not supported.

3. Make sure the printer is in the Auto Wireless Connect (AWC) setup mode.

When the printer enters AWC setup mode, the light next to the Wireless button blinks blue and the
Signal Bars cycle on the display.

If this is the first time you set up the printer, the printer is ready for setup after the printer is powered
on. It keeps searching for the HP Smart app to connect within two hours, and then stops searching.

To put the printer back into AWC setup mode, press the Wireless button ( ) and the Cancel button

( ) together for 3 seconds. When the light next to the Wireless button blinks blue, continue setup.

4. Open the HP Smart app, and then do one of the following:

● iOS/Android: On the home screen, tap the Plus icon ( ) and then select the printer. If the printer
is not in the list, tap Add Printer. Follow the onscreen instructions to add the printer to your
network.

● Windows/macOS: On the home screen, click or tap the Plus icon ( ) and then select the printer.
If the printer is not found, click or tap Set up a new printer. Follow the onscreen instructions to add
the printer to your network.

20 Chapter 3 Connect your printer ENWW

Connect to a wireless network with a router
TIP: To print the Wireless Quick Start Guide, press and hold the Information button ( ) for 3 seconds.

● Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)

● Connect your printer to a wireless network using HP printer software

Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)
Before you can connect your printer to a wireless network using WPS, make sure you have the following:

● A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point.

NOTE: The printer supports connections using 2.4 GHz or 5 GHz.

● A computer connected to the wireless network that you intend to connect the printer to. Be sure you
have installed the HP printer software on the computer.

If you have a WPS router with a WPS push button, follow the Push Button method. If you are not certain your
router has a push button, follow the PIN method.

To use the Push Button Configuration (PBC) method

1. Press and hold the Wireless button ( ) for at least three seconds to start WPS Push Button method.

2. Press the WPS button on your router.

NOTE: The product begins a timer for approximately two minutes while a wireless connection is established.

If the printer connects successfully, the light next to the Wireless button glows steady blue.

To use the PIN method

1. Press and hold the Wireless button ( ) and the Information button ( ) for at least 5 seconds to
start WPS PIN method and print a page with a PIN code.

2. Open the configuration utility or software for the wireless router or wireless access point, and then enter
the WPS PIN.

NOTE: For more information about using the configuration utility, see the documentation provided
with the router or wireless access point.

Wait for about two minutes. If the printer connects successfully, the light next to the Wireless button glows
steady blue.

ENWW Connect to a wireless network with a router 21

 Connect your printer to a wireless network using HP printer software
To connect the printer to an integrated wireless WLAN 802.11 network, you will need the following:

● A wireless 802.11b/g/n network that includes a wireless router or access point.

NOTE: The printer supports connections using 2.4 GHz or 5 GHz.

● A computer connected to the wireless network that you intend to connect the printer to.

● Network name (SSID).

● WEP key or WPA Passphrase (if needed).

To connect your printer using HP printer software (Windows)

1. Depending on whether you have installed the HP printer software or not, do one of the following:

If you have not installed the HP printer software on your computer

a. Visit 123.hp.com to download and install the printer software.

b. Follow the onscreen instructions.

If you have the HP printer software installed on your computer

a. Open the printer software. For more information, see Open the HP printer software (Windows)
on page 33.

b. In the printer software, click Tools.

c. Click Device Setup & Software.

d. Click Connect a new device, and then follow the onscreen instructions.

2. After the printer connects successfully, the light next to the Wireless button glows steady blue.

22 Chapter 3 Connect your printer ENWW

Connect wirelessly without a router
With Wi-Fi Direct, you can print wirelessly from a computer, smart phone, tablet, or other wireless-capable
device—without connecting to an existing wireless network.

Guidelines for using Wi-Fi Direct

● Make sure your computer or mobile device has the necessary software.

– If you are using a computer, make sure you have installed the HP printer software.

If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct first and
then install the printer software. Select Wireless when prompted by the printer software for a
connection type.

– If you are using a mobile device, make sure you have installed a compatible printing app. For more
information, visit the HP Mobile Printing website at www.hp.com/go/mobileprinting. If a local
version of this website is not available in your country/region or language, you might be directed to
the HP Mobile Printing website in another country/region or language.

● Make sure Wi-Fi Direct for your printer is turned on.

● Up to five computers and mobile devices can use the same Wi-Fi Direct connection.

● Wi-Fi Direct can be used while the printer is also connected either to a computer using a USB cable or to
a network using a wireless connection.

● Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet.

To turn Wi-Fi Direct on or off from the control panel

On the printer control panel, press and hold the Wireless button ( ) and the Resume button ( )
together for three seconds.

● When Wi-Fi Direct is turned on, the Wi-Fi Direct icon shows on the display. To find the Wi-Fi Direct name
and password, press the Information button ( ) to print a printer information page.

NOTE: When you turn on Wi-Fi Direct the first time, the printer automatically prints a Wi-Fi Direct
guide. The guide provides instructions about how to use Wi-Fi Direct. After that, you can press the
Information button ( ) and the Resume button ( ) together to print the Wi-Fi Direct guide. The
guide may not be available in all languages.

● When Wi-Fi Direct is turned off, the Wi-Fi Direct icon is not visible on the display.

● For more information about the Wi-Fi Direct icon status, see Control panel display icons on page 5.

To turn Wi-Fi Direct on or off from an Android or iOS device

1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 32.

2. Tap the printer icon, and then find and tap Advanced Settings.

3. Follow the on-screen instructions to connect to the printer Embedded Web Server.

ENWW Connect wirelessly without a router 23

 4. In the Embedded Web Server, tap Network > Wi-Fi Direct > Status > Edit Settings.

5. Select the option to turn Wi-Fi Direct on or off and then tap Apply.

TIP: You can change the Wi-Fi Direct connection security setting for the printer here.

Wi-Fi Direct connection security setting

● If the Wi-Fi Direct connection security for the printer is Automatic, the Wi-Fi Direct password is set to
12345678 and cannot be changed.

● If the Wi-Fi Direct connection security for the printer is set to Manual (the default setting), you need to
do one of the following to connect to the printer on your mobile device or compter.

– If the Information button ( ) is blinking white, press it within 30 seconds.

– If the printer prints out a page with a PIN code, follow the instruction on the page.

TIP:

● You can also turn on Wi-Fi Direct or change the Wi-Fi Direct connection security setting from the EWS.
For more information about using the EWS, see Open the embedded web server on page 35.

● To find the Wi-Fi Direct name and password, press the Information button ( ) to print a printer
information page.

To print from a wireless-capable mobile device that supports Wi-Fi Direct

Make sure you have installed the latest version of HP Print Service Plugin on your mobile device (if using an
Android device). You can download this plugin from the Google Play application store.

1. Make sure you have turned on Wi-Fi Direct on the printer.

2. Turn on Wi-Fi Direct on your mobile device. For more information, see the documentation provided with
the mobile device.

3. From your mobile device, select a document from a print enabled application, and then select the option
to print the document.

The list of available printers appears.

4. From the list of available printers, choose the Wi-Fi Direct name shown such as DIRECT-**-HP DeskJet
2700 series (where ** are the unique characters to identify your printer).

Enter the Wi-Fi Direct password when prompted.

5. Print your document.

To print from a wireless-capable mobile device that does not support Wi-Fi Direct

Make sure you have installed a compatible printing app on your mobile device. For more information, visit the
HP Mobile Printing website at www.hp.com/go/mobileprinting. If a local version of this website is not

24 Chapter 3 Connect your printer ENWW

 available in your country/region or language, you might be directed to the HP Mobile Printing website in
another country/region or language.

1. Make sure you have turned on Wi-Fi Direct on the printer.

2. Turn on the Wi-Fi connection on your mobile device. For more information, see the documentation
provided with the mobile device.

NOTE: If your mobile device does not support Wi-Fi, you are not able to use Wi-Fi Direct.

3. From the mobile device, connect to a new network. Use the process you normally use to connect to a
new wireless network or hotspot. Choose the Wi-Fi Direct name from the list of wireless networks
shown such as DIRECT-**-HP DeskJet 2700 series (where ** are the unique characters to identify your
printer).

Enter the Wi-Fi Direct password when prompted.

4. Print your document.

To print from a wireless-capable computer (Windows)

1. Make sure you have turned on Wi-Fi Direct on the printer.

2. Turn on the computer's Wi-Fi connection. For more information, see the documentation provided with
the computer.

NOTE: If your computer does not support Wi-Fi, you are not able to use Wi-Fi Direct.

3. From the computer, connect to a new network. Use the process you normally use to connect to a new
wireless network or hotspot. Choose the Wi-Fi Direct name from the list of wireless networks shown
such as DIRECT-**-HP DeskJet 2700 series (where ** are the unique characters to identify your printer).

Enter the Wi-Fi Direct password when prompted.

4. Print your document.

ENWW Connect wirelessly without a router 25

 Wireless settings
You can set up and manage your printer wireless connection and perform a variety of network management
tasks. This includes printing information about network settings, turning the wireless function on or off, and
changing wireless settings.

To turn on or off the wireless capability of the printer

Press the Wireless button ( ) to turn on or off the printer wireless capabilities.

● If the printer has an active connection to a wireless network, the light next to the Wireless button glows

steady blue, and the printer display shows the Signal Bars ( ) icon.

● If wireless is turned off, the light next to the Wireless button is off.

● For more information about the wireless status, see Control panel lights and display icons status
on page 7.

● To print the wireless network test report and network configuration page, see Print reports from control
panel on page 9.

To change wireless settings (Windows)

This method is available if you have already installed the printer software.

NOTE: This method requires a USB cable. Do not connect the USB cable until prompted to do so.

1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

2. In the printer software, click Tools.

3. Click Device Setup & Software.

4. Select Reconfigure Wireless Settings. Follow the onscreen instructions.

To restore network settings to default settings

● Press and hold the Wireless button ( ) and the Cancel button ( ) from the printer control panel
together for three seconds.

26 Chapter 3 Connect your printer ENWW

Tips for setting up and using a wireless printer
Use the following tips to set up and use a wireless printer:

● When setting up the wireless networked printer using a computer, make sure:

– Your wireless router or access point is powered on.

– You computer is connected to a wireless network (not using an Ethernet cable).

– The printer is in the AWC setup mode.

The printer searches for wireless routers, then lists the detected network names on the computer.

● If your computer or mobile device is connected to a Virtual Private Network (VPN), you need to
disconnect from the VPN before you can access any other device on your network, including the printer.

● Learn more about configuring your network and the printer for wireless printing. Click here to go online
for more information.

● Learn how to find your network security settings. Click here to go online for more information.

● Learn about the HP Print and Scan Doctor. Click here to go online for more information.

NOTE: This utility is only available for Windows operating system.

● Use the HP online firewall troubleshooter to determine if a firewall or antivirus program is preventing
your computer from connecting to the printer and find resolutions.

ENWW Tips for setting up and using a wireless printer 27

 Connect your printer to your computer with a USB cable (non-
wireless connection)
The printer supports a rear USB 2.0 High Speed port for connection to a computer.

To connect the printer with the USB cable

1. Visit 123.hp.com to download and install the printer software.

NOTE: Do not connect the USB cable to the printer until you are prompted to do so.

2. Follow the onscreen instructions. When you are prompted, connect the printer to the computer by
selecting USB on the Connection Options screen.

3. Follow the onscreen instructions.

If the printer software has been installed, the printer will operate as a plug-and-play device.

28 Chapter 3 Connect your printer ENWW

Change the connection type
If you first set up your printer and installed the software with a USB cable, directly connecting the printer to
your computer, you can easily change to a wireless network connection. You will need a wireless
802.11a/b/g/n network that includes a wireless router or access point.

NOTE: The printer supports connections using 2.4GHz or 5GHz .

Before changing from a USB connection to a wireless network, make sure that:

● The printer is connected to your computer with the USB cable until you are prompted to disconnect the
cable.

● The computer is connected to the wireless network that you intend to install the printer on.

You can also change from a wireless connection to a USB connection.

To change from a USB connection to a wireless network (Windows)

1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

2. In the printer software, click Tools.

3. Click Device Setup & Software.

4. Select Convert a USB connected device to wireless. Follow the onscreen instructions.

To change from a USB connection to a wireless network using the HP Smart app on a Windows 10 computer
(Windows)

1. Open the HP Smart app. For information about how to open the app on a Windows 10 computer, see Use
the HP Smart app to print, copy, scan, and troubleshoot on page 32.

2. Make sure your printer is selected.

TIP: If you want to select a different printer, click the ( ) on the toolbar at the left side of the
screen, and then select Select a Different Printer to view all available printers.

3. Click Learn More when you see “Make printing easier by connecting your printer wirelessly” on top of the
home page of the app.

To change from a wireless connection to a USB connection (Windows/macOS)

▲ Connect the printer and the computer with a USB cable. The USB port is at the back of the printer.

ENWW Change the connection type 29

30 Chapter 3 Connect your printer ENWW
4 Printer management tools

This section contains the following topics:

● Use the HP Smart app to print, copy, scan, and troubleshoot

● Open the HP printer software (Windows)

● Toolbox (Windows)

● Embedded web server (EWS)

● Sleep mode

● Quiet Mode

● Auto-Off

● Update the printer

ENWW 31
 Use the HP Smart app to print, copy, scan, and troubleshoot
HP Smart helps you to set up, copy, scan, print, share, and manage your HP printer. You can share documents
and images through email, text messages, and popular cloud and social media services (such as iCloud,
Google Drive, Dropbox, and Facebook). You can also set up new HP printers, as well as monitor and order
supplies.

NOTE: The HP Smart app might not be available in all languages. Some features might not be available with
all printer models.

To install the HP Smart app

▲ The HP Smart app is supported on iOS, Android, Windows 10 and MAC devices. To install the app on your
device, go to 123.hp.com and follow the onscreen instructions to access your device’s app store.

To open the HP Smart app on a Windows 10 computer

▲ After installing the HP Smart app, from the device desktop, click Start, and then select HP Smart from
the app list.

Connect to your printer

▲ Make sure that your device is connected to the same network as the printer. Then HP Smart will
automatically detect the printer.

Get more information about the HP Smart app

For basic instructions on how to print, copy, scan, and troubleshoot using HP Smart, see Print using the HP
Smart app on page 42, Copy and scan using HP Smart on page 62 and Get help from the HP Smart app
on page 78.

For more information about using HP Smart for printing, copying, scanning, accessing printer features, and
troubleshooting issues, go to:

● iOS/Android: www.hp.com/go/hpsmart-help

● Windows 10: www.hp.com/go/hpsmartwin-help

● Mac: http://www.hp.com/go/hpsmartmac-help

32 Chapter 4 Printer management tools ENWW

Open the HP printer software (Windows)
After installing the HP printer software, double-click the printer icon on the desktop or do one of the following
to open the printer software:

● Windows 10: From the computer desktop, click Start, select HP from the app list, and then select the
icon with the printer name.

● Windows 8.1: Click the down arrow in the lower left corner of the Start screen, and then select the
printer name.

● Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select
the printer name.

● Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for
the printer, and then select the icon with the printer name.

NOTE: If you have not installed the HP printer software, visit 123.hp.com to download and install the
necessary software.

ENWW Open the HP printer software (Windows) 33

 Toolbox (Windows)
The Toolbox provides maintenance information about the printer.

NOTE: The Toolbox can be installed along with the HP printer software if the computer meets the system
requirements. For information about system requirements, see Specifications on page 103.

To open the Toolbox

1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

2. Click Print & Scan .

3. Click Maintain Your Printer.

34 Chapter 4 Printer management tools ENWW

Embedded web server (EWS)
When the printer is connected to a network, you can use the printer's embedded web server (EWS) to view
status information, change settings, and manage it from your computer.

NOTE: For your security, some settings in the EWS are password-protected. If prompted for a password,
enter the PIN from the label on the inside of your printer’s cartridge access door.

NOTE: You can open and use the embedded web server without being connected to the Internet. However,
some features are not available.

● About cookies

● Open the embedded web server

● Embedded web server cannot be opened

About cookies
The embedded Web server (EWS) places very small text files (cookies) on your hard drive when you are
browsing. These files let the EWS recognize your computer the next time you visit. For example, if you have
configured the EWS language, a cookie helps remember which language you have selected so that the next
time you access the EWS, the pages are displayed in that language. Some cookies (such as the cookie that
stores customer-specific preferences) are stored on the computer until you clear them manually.

You can configure your browser to accept all cookies, or you can configure it to alert you every time a cookie is
offered, which allows you to decide which cookies to accept or refuse. You can also use your browser to
remove unwanted cookies.

Depending on your printer, if you disable cookies, you also disable one or more of the following features:

● Using some setup wizards

● Remembering the EWS browser language setting

● Personalizing the EWS Home page

For information about how to change your privacy and cookie settings and how to view or delete cookies, see
the documentation available with your Web browser.

Open the embedded web server

You can access the embedded web server through either a network or Wi-Fi Direct.

To open the embedded web server through a network

1. Find out the IP address or hostname of the printer by pressing the Information button ( ) to print an
Information page.

NOTE: The printer must be on a network and must have an IP address.

2. In a supported web browser on your computer, type the IP address or hostname assigned to the printer.

For example, if the IP address is 123.123.123.123, type the following address into the web browser:
http://123.123.123.123.

ENWW Embedded web server (EWS) 35

 To open the embedded web server through Wi-Fi Direct

1. If the Wi-Fi Direct icon on the printer display is off, press and hold the Wireless button ( ) and the

Resume button ( ) together for three seconds to turn it on. To find the Wi-Fi Direct name and

password, press the Information button ( ) to print a printer information page.

2. From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name, for
example: DIRECT-**-HP DeskJet 2700 series. Enter the Wi-Fi Direct password when prompted.

3. In a supported web browser on your computer, type the IP address or hostname assigned to the printer.

For example, if the IP address is 192.168.0.12, type the following address: http://192.168.0.12.

Embedded web server cannot be opened

Check your network setup

● Make sure you are not using a phone cord or a crossover cable to connect the printer to the network.

● Make sure the network cable is securely connected to the printer.

● Make sure the network hub, switch, or router is turned on and working correctly.

Check the computer

● Make sure the computer that you are using is connected to the same network as the printer.

Check your web browser

● Make sure the web browser meets the minimum system requirements. For information about system
requirements, see Specifications on page 103.

● If your web browser uses any proxy settings to connect to the Internet, try turning off these settings. For
more information, see the documentation available with your web browser.

● Make sure JavaScript and cookies are enabled in your web browser. For more information, see the
documentation available with your web browser.

Check the printer IP address

● Make sure the printer IP address is correct.

To find out the printer IP address, press the Wireless button ( ) and the Information button ( )
at the same time to print the Network Configuration Report.

● Make sure the printer IP address is valid. The printer IP address should have the similar format as the
router IP address. For example, the router IP address might be 192.168.0.1 or 10.0.0.1 and the printer IP
address is 192.168.0.5 or 10.0.0.5.

If the printer IP address is similar to 169.254.XXX.XXX or 0.0.0.0, it is not connected to the network.

TIP: If you are using a computer running Windows, you can visit the HP online support website at
www.support.hp.com. This website provides information and utilities that can help you correct many
common printer problems.

36 Chapter 4 Printer management tools ENWW

Sleep mode
Power usage is reduced while in Sleep mode. After initial setup of printer, the printer will enter Sleep mode
after five minutes of inactivity. Use the HP Smart app to change the period of inactivity before the printer
sleeps by selecting Advanced Settings. You can also change this setting using the printer’s embedded web
server by completing the following steps.

To change the time to Sleep mode

1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 35.

2. Click the Settings tab.

3. In the Power Management section, click Energy Save Mode, and select the desired option.

NOTE: If prompted for a password, enter the PIN from the label on your printer. It might be near the
cartridge access area inside the printer or on the back, side, or bottom of the printer.

4. Click Apply.

ENWW Sleep mode 37

 Quiet Mode
Quiet Mode slows down printing to reduce overall noise without affecting print quality. Quiet Mode only works
for printing with Better print quality on plain paper. To reduce printing noise, turn on Quiet Mode. To print at
normal speed, turn Quiet Mode off. Quiet Mode is off by default.

NOTE: In Quiet Mode, if you print on plain paper with the Draft or Best print quality, or if you print photos or
envelopes, the printer works in the same way as when Quiet Mode is off.

To turn Quiet Mode on or off from an Android or iOS device

1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 32.

2. Tap Printer Settings.

3. Tap Quiet Mode, and then change the setting.

To turn Quiet Mode on or off from the printer software (Windows)

1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

2. Click the Quiet Mode tab.

3. Select On or Off .

4. Click Save Setting.

To turn Quiet Mode on or off from the embedded web server (EWS)

1. Open the EWS. For more information, see Open the embedded web server on page 35.

2. Click the Settings tab.

3. In the Preferences section, select Quiet Mode, and then select On or Off.

4. Click Apply.

38 Chapter 4 Printer management tools ENWW

Auto-Off
This feature turns the printer off after 2 hours of inactivity to help reduce energy use. Auto-Off turns the
printer off completely, so you must use the Power button to turn the printer back on. If your printer
supports this energy-saving feature, Auto-Off is automatically enabled or disabled depending on printer
capabilities and connection options. Even when Auto-Off is disabled, the printer enters Energy Save Mode
on page 100 after 5 minutes of inactivity to help reduce energy use.

● Auto-Off is always enabled if the printer does not have network or fax capability.

● Auto-Off is disabled when a printer’s wireless or Wi-Fi Direct capability is turned on or when a printer
with fax, USB, or Ethernet network capability establishes a fax, USB, or Ethernet network connection.

ENWW Auto-Off 39
 Update the printer
By default, if the printer is connected to a network and Web Services has been enabled, the printer
automatically checks for updates.

You can also manually check for and install updates from the embedded web server.

To update the printer using the embedded web server

1. Open the EWS.

For more information, see Open the embedded web server on page 35.

2. Click the Tools tab.

3. In the Printer Updates section, click Firmware Updates, and then follow the onscreen instructions.

NOTE: If prompted for a password, enter the PIN from the label on your printer. It might be near the
cartridge access area inside the printer or on the back, side, or bottom of the printer.

NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen
instructions to set up a proxy server. If you do not have the details, contact your network administrator or the
person who set up the network.

NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts.

40 Chapter 4 Printer management tools ENWW

5 Print

● Print using the HP Smart app

● Print from mobile devices

● Print using a computer

● Tips for print success

ENWW 41
 Print using the HP Smart app
This section provides basic instructions for using the HP Smart app to print from your Android, iOS, Windows
10 or Mac device. For more information about using the HP Smart app, go to:

● iOS/Android: www.hp.com/go/hpsmart-help

● Windows 10: www.hp.com/go/hpsmartwin-help

● Mac: http://www.hp.com/go/hpsmartmac-help

To print from an Android or iOS device

1. Make sure you have loaded paper in the input tray. For more information, see Load media on page 12.

2. Open the HP Smart app.

3. Tap the Plus icon if you need to change to a different printer, or add a new printer.

4. Tap a printing option (for example, Print Photos or Print Facebook Photos, etc.). You can print photos
and documents from your device, cloud storage, or social media sites.

5. Select the photo or document you want to print.

6. Select the appropriate options. To view more settings, click or tap More settings. For more information
about printing settings, see Printer settings tips (Windows) on page 49.

7. Tap Print.

To print from a Windows 10 device

1. Make sure you have loaded paper in the input tray. For more information, see Load media on page 12.

2. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 32.

3. On the HP Smart Home screen, make sure your printer is selected.

TIP: If you want to select a different printer, click or tap the ( ) icon on the toolbar at the left side of
the screen, and then select Select a Different Printer to view all available printers.

4. At the bottom of the Home screen, click or tap Print.

5. Select Print Photo, locate a photo you want to print, and then click or tap Select Photos to Print.

Select Print Document, locate a document you want to print, and then click or tap Print.

6. Select the appropriate options. To view more settings, click or tap More settings. For more information
about printing settings, see Printer settings tips (Windows) on page 49.

7. Click or tap Print to begin printing.

To print from a Mac device

1. Open the HP Smart app.

2. Click the Print tile, and then click Print Document or Print Photo.

3. Find the file you want to print from the Documents folder, the Pictures library, or any folder on the Mac.

42 Chapter 5 Print ENWW

 4. Select the document or photo you want, and then click Print. The Print window opens.

5. Select a different printer or make any changes to the print settings, such as paper size or output quality.

6. Click Print.

ENWW Print using the HP Smart app 43

 Print from mobile devices
Print with Print Anywhere
Print Anywhere is a free service that allows you to use the HP Smart app with your HP Account to print
remotely using cellular data or a remote Wi-Fi connection.

With Print Anywhere, you can print to your HP web-connected printer anytime, from any location. Click here
to go online for more information.

Before you can use Print Anywhere, make sure the printer is connected to an active network providing
Internet access.

To print a document using Print Anywhere

1. If you created an HP Account during printer setup (might not be available in all countries/regions), Print
Anywhere was automatically enabled.

If you did not create an HP Account during setup, follow the steps below for your operating system to
enable Print Anywhere.

iOS/Android

a. From the HP Smart app home screen, tap your printer.

b. Tap Print Anywhere.

c. Sign in or create an HP Account when prompted.

d. Tap Enable.

Windows 10/macOS

a. From the HP Smart app home screen, click Printer Settings.

b. On the Print Anywhere tab, click Sign In.

c. Sign in or create an HP Account when prompted.

d. Click Enable.

2. Open HP Smart, and then print your document. For more information, see Print using the HP Smart app
on page 42.

NOTE: If you want to use Print Anywhere capabilities from multiple devices, you need to sign in with your HP
Account on each of the additional devices. After signing in, the new device will be ready to print with Print
Anywhere.

44 Chapter 5 Print ENWW

Print using a computer
● Print documents

● Print photos

● Print envelopes

● Print using the maximum dpi

● Print using a Mac desktop or laptop

Print documents
Before printing documents, make sure you have paper loaded in the input tray and the output tray is open.
For more information about loading paper, see Load media on page 12.

To print a document (Windows)

1. From your software, select Print.

2. Make sure your printer is selected.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.

4. Select the appropriate options on the Printing Shortcuts or Printing Shortcut tab.

To change other print settings, click the other tabs.

For more printing tips, see Printer settings tips (Windows) on page 49.

NOTE: If you change the paper size, ensure that you have loaded the correct paper in the input tray.

5. Click OK to close the Properties dialog box.

6. Click Print or OK to begin printing.

To print on both sides of the page (Windows)

1. From your software, select Print.

2. Make sure your printer is selected.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.

4. On the Printing Shortcuts or Printing Shortcut tab, select the Two-sided (Duplex) Printing shortcut.

To change other print settings, click the other tabs.

For more printing tips, see Printer settings tips (Windows) on page 49.

NOTE: If you change the paper size, ensure that you have loaded the correct paper in the input tray.

ENWW Print using a computer 45

 5. After you print the first side, follow the onscreen instructions to reload the paper, and then click
Continue.

6. Click OK to print.

Print photos
Before printing photos, make sure you have photo paper loaded in the input tray and the output tray is open.
For more information about loading paper, see Load media on page 12.

To print a photo on photo paper (Windows)

1. From your software, select Print.

2. Make sure your printer is selected.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.

4. Select the appropriate options on the Printing Shortcuts or Printing Shortcut tab.

To change other print settings, click the other tabs.

For more printing tips, see Printer settings tips (Windows) on page 49.

NOTE: If you change the paper size, ensure that you have loaded the correct paper in the input tray.

5. Click OK to return to the Properties dialog box.

6. Click OK, and then click Print or OK in the Print dialog box.

NOTE: After the printing is finished, remove unused photo paper from the input tray. Store the photo paper
so it does not start to curl, which could reduce the quality of your printout.

Print envelopes
Before printing envelopes, make sure you have envelopes loaded in the input tray and the output tray is open.
You can load one or more envelopes into the input tray. Do not use shiny or embossed envelopes or envelopes
that have clasps or windows. For more information about loading envelopes, see Load media on page 12.

NOTE: For specific details on how to format text for printing on envelopes, consult the help files in your
word application.

To print an envelope (Windows)

1. From your software, select Print.

2. Make sure your printer is selected.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.

4. Select appropriate options from the Paper/Quality and Layout tabs and Advanced Options dialog box.

46 Chapter 5 Print ENWW

 ● From the Paper type or Media drop-down list, select the appropriate paper type.

● From the Paper sizes or Paper Size drop-down list, select the appropriate envelope size.

● Select Portrait or Landscape orientation.

For more printing tips, see Printer settings tips (Windows) on page 49.

5. Click OK, and then click Print or OK in the Print dialog box.

Print using the maximum dpi

Use maximum dots per inch (dpi) to print high-quality, sharp images on photo paper. Printing in maximum dpi
takes longer than printing with other settings and requires a large amount of disk space. For a list of
supported print resolutions, visit the product support website at www.support.hp.com.

To print in maximum dpi mode (Windows)

1. From your software, select Print.

2. Make sure your printer is selected.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.

4. Select the appropriate options.

● Click Paper/Quality tab. From the Media drop-down list, select the appropriate paper type.

● Click the Advanced button. Select the appropriate paper size from the Paper Size drop-down list.
Select Max DPI Enabled from the Print Quality drop-down list. Then click OK to close the
Advanced Options dialog box.

NOTE: Not all paper types support maximum dpi. You will see an alert icon beside the option if the
selected paper type in the Media drop-down list does not support it.

For more printing tips, see Printer settings tips (Windows) on page 49.

5. Confirm the paper orientation on the Layout tab, and then click OK to print.

Print using a Mac desktop or laptop

Instructions for HP AirPrint-compatible printers and Mac computers with macOS and OS X 10.7 (Lion) and
later.

ENWW Print using a computer 47

 Printer connected to network

If your printer is already set up and connected to your wireless network, you can enable printing from a Mac
desktop or laptop using the System Preferences menu.

1. Open System Preferences and select Printers and Scanners.

2. Click Add + to set up the printer on your Mac. Choose your printer from the displayed list of network
printers, then click Add. This will install the available print, scan, or fax drivers for your printer.

These instructions let you print from your Mac. Continue to use the HP Smart app to monitor ink levels and
printer alerts.

Printer not connected to network

▲ If you have not set up or connected your printer to your network, go to 123.hp.com to install the
necessary software. When you complete printer setup, use the HP Utility from the Applications folder to
monitor ink levels and printer alerts.

48 Chapter 5 Print ENWW

Tips for print success
● Ink tips

● Paper loading tips

● Printer settings tips (Windows)

To print successfully, the HP cartridges should be functioning properly with sufficient ink, the paper should be
loaded correctly, and the printer should have the appropriate settings.

Ink tips
● Use original HP cartridges.

● Install both the black and tri-color cartridges correctly.

For more information, see Replace cartridges on page 56.

● Check the estimated ink levels in the cartridges to make sure there is sufficient ink.

For more information, see Check estimated ink levels on page 53.

● If the print quality is not acceptable, see Fix print quality issues on page 88 for more information.

NOTE: Original HP cartridges are designed and tested with HP printers and papers to help you easily
produce great results, time after time.

HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a
result of using a non-HP supply will not be covered under warranty.

If you see a 'Non-HP Cartridge' message displayed from the printer software and you believe you purchased
original HP cartridges, go to: www.hp.com/go/anticounterfeit .

Paper loading tips

● Load a stack of paper (not just one page). All of the paper in the stack should be in the same size and
type to avoid a paper jam.

● Load the paper with the side to be printed on facing up.

● Make sure that paper loaded in the input tray lays flat, and the edges are not bent or torn.

● Adjust the paper-width guides in the input tray to fit snugly against all paper. Make sure the paper-width
guides do not bend the paper in the input tray.

For more information, see Load media on page 12.

Printer settings tips (Windows)

● To change default print settings, open the HP printer software, click Print & Scan , and then click Set
Preferences. For information how to open the printer software, see Open the HP printer software
(Windows) on page 33.

● To understand paper and paper tray settings:

ENWW Tips for print success 49

 – Paper Size: Select the paper size you loaded in the input tray.

– Media: Select the paper type you are using.

● To understand color or black and white settings:

– Color: Uses ink from all cartridges for full color prints.

– Black & White or Black Ink Only: Uses the black ink only for normal or lower quality black and
white prints.

– High Quality Grayscale: Uses ink from both the color and black cartridges to produce a wider range
of black and grey tones for high quality black and white prints.

● To understand print quality settings:

The print quality is measured in print resolution dots per inch (dpi). Higher dpi produces clearer and
more detailed prints, but slows print speed and might use more ink.

– Draft: Lowest dpi typically used when ink levels are low or when high quality prints are not needed.

– Better: Suitable for most print jobs.

– Best: Better dpi than Better.

– Max DPI Enabled: Highest dpi setting available for print quality.

● To understand page and layout settings:

– Orientation: Select Portrait for vertical prints or Landscape for horizontal prints.

– Print on Both Sides: Manually flip the pages after one side of the paper prints out so that you can
print on both sides of the paper.

○ Flip on Long Edge: Select it if you want to flip pages by the long edge of the paper when
printing on both sides of the paper.

○ Flip on Short Edge: Select it if you want to flip pages by the short edge of the paper when
printing on both sides of the paper.

– Pages per Sheet: Helps you specify the order of the pages if you print the document with more
than two pages per sheet.

50 Chapter 5 Print ENWW

6 Manage cartridges

This section contains the following topics:

● Information on cartridges and the printhead

● Check estimated ink levels

● Order ink supplies

● HP Instant Ink

● Replace cartridges

● Use single cartridge mode

● Cartridge warranty information

● Tips for working with cartridges

ENWW 51
 Information on cartridges and the printhead
The following tips help maintain HP cartridges and ensure consistent print quality.

● The instructions in this guide are for replacing cartridges, and are not intended for first time installation.

● Keep all cartridges in the original sealed packages until they are needed.

● Be sure to turn off the printer properly.

● Store cartridges at room temperature (15-35° C or 59-95° F).

● Do not clean the printhead unnecessarily. This wastes ink and shortens the life of the cartridges.

● Handle cartridges carefully. Dropping, jarring, or rough handling during installation can cause temporary
printing problems.

● If you are transporting the printer, do the following to prevent ink leaking from the printer or other
damage from occurring to the printer:

● Make sure you turn off the printer by pressing (the Power button). Wait until all sounds of
internal motion stop before unplugging the printer.

● Make sure you leave the cartridges installed.

● The printer must be transported sitting flat; it should not be placed on its side, back, front, or top.

52 Chapter 6 Manage cartridges ENWW

Check estimated ink levels
You can check the estimated ink levels from the printer software, printer control panel or HP Smart.

NOTE: If you have enrolled in the HP Instant Ink service, the printer automatically checks the ink levels and
orders new ink when necessary. For more information about HP Instant Ink, go to hpinstantink.com.

To check the ink levels from the printer control panel

● The Ink Level icons on the printer display show an estimate of ink remaining in the cartridges.

To check the ink levels from the HP printer software (Windows)

1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

2. In the printer software, click the Estimated Levels tab.

To check the ink levels from the HP Smart app

● Open HP Smart. Check the estimated ink levels at the right side of the printer image.

NOTE:

● If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in another
printer, the ink level indicator might be inaccurate or unavailable.

● Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-
ink warning message, consider having a replacement cartridge available to avoid possible printing
delays. You do not have to replace the cartridges until the print quality is unacceptable.

● Ink from the cartridges is used in the printing process in a number of different ways, including in the
initialization process, which prepares the printer and cartridges for printing, and in printhead servicing,
which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the
cartridge after it is used. For more information, see www.hp.com/go/inkusage.

ENWW Check estimated ink levels 53

 Order ink supplies
Before ordering cartridges, locate the correct cartridge number.

To locate the cartridge number on the printer

● The cartridge number is located inside the cartridge access door.

To locate the cartridge number from the HP Smart app

● Open HP Smart. Click or tap Printer Settings, and then click or tap Supported Cartridges.

To locate the cartridge number from the printer software (Windows)

1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

2. In the printer software, click Shop, click Shop For Supplies Online, and then follow the onscreen
instructions.

To order original HP supplies for the HP DeskJet 2700 series, go to www.hp.com/buy/supplies . If prompted,
choose your country/region, and then follow the prompts to find the right cartridges for your printer.

NOTE: Ordering cartridges online is not supported in all countries/regions. If it is not available in your
country/region, you may still view supplies information and print a list for reference when shopping at a local
HP reseller.

54 Chapter 6 Manage cartridges ENWW

HP Instant Ink
Your printer is eligible for the HP Instant Ink replacement service, which can reduce your printing costs and
save you time. After you enroll in the service, your printer automatically keeps track of your ink levels and
orders more ink for you when the ink is running low. HP ships the new cartridges straight to your door before
your ink runs out, so you'll always have ink on hand when you need it. Additionally, the cartridges that you
receive contain more ink than HP XL cartridges, so you'll need to replace cartridges less frequently. To learn
more about how HP Instant Ink can save you time and money, go to hpinstantink.com.

NOTE: HP Instant Ink service is not available in all countries. To check availability, visit hpinstantink.com.

ENWW HP Instant Ink 55

 Replace cartridges
To replace the cartridges

1. Check that power is on.

2. Remove the cartridge.

a. Open the cartridge access door and wait for the print carriage to move to the center of the printer.

b. Press down to release the cartridge, and then pull it toward you out of the slot.

3. Insert a new cartridge.

a. Remove the cartridge from the packaging.

56 Chapter 6 Manage cartridges ENWW

 b. Remove the plastic tape using the pull tab.

NOTE: Do not touch the electrical contacts on the cartridge.

c. Slide the cartridge into the slot at a slight upward angle, and then push up on the cartridge until it
clicks into place.

d. Close the cartridge access door.

ENWW Replace cartridges 57

 Use single cartridge mode
Use the single cartridge mode to operate the printer with only one cartridge. The single cartridge mode is
initiated when one of the following occurs.

● There is only one cartridge installed in the carriage.

● A cartridge is removed from the carriage if there are two cartridges installed previously.

NOTE: If the printer enters the single cartridge mode when two cartridges are installed in the printer,
verify that the protective piece of plastic tape has been removed from each cartridge. When the plastic
tape covers the cartridge contacts, the printer cannot detect that the cartridge is installed. If there is no
plastic tape on the cartridges, try cleaning the cartridge contacts. For information about cleaning
cartridge contacts, see Cartridge issues on page 83.

To exit the single cartridge mode

● Install both the black and tri-color cartridges in the printer.

58 Chapter 6 Manage cartridges ENWW

Cartridge warranty information
The HP cartridge warranty is applicable when the cartridge is used in its designated HP printing device. This
warranty does not cover HP cartridges that have been refilled, remanufactured, refurbished, misused, or
tampered with.

During the warranty period, the cartridge is covered as long as the HP ink is not depleted and the end of
warranty date has not been reached. The end of warranty date, in YYYY/MM/DD format, may be found on the
cartridge as indicated:

For a copy of the HP Limited Warranty Statement, visit www.hp.com/go/orderdocuments.

ENWW Cartridge warranty information 59

 Tips for working with cartridges
Use the following tips to work with cartridges:

● To protect the cartridges from drying out, always turn the printer off using the Power button.

● Do not open or untape cartridges until you are ready to install them. Leaving tape on the cartridges
reduces ink evaporation.

● Insert the cartridges into the correct slots. Match the color of each cartridge to the color of the cartridge
latch. Make sure the cartridges snap into place.

● Align the printer for best print quality. See Printing issues on page 85 for more information.

● When the Estimated Cartridge Levels screen in the HP Smart app or the Estimated Levels screen in the
printer software shows one or both cartridges in a low state, consider getting replacement cartridges to
avoid possible printing delays. You do not need to replace the cartridges until print quality becomes
unacceptable. See Replace cartridges on page 56 for more information.

● If you remove a cartridge from the printer for any reason, try to replace it again as soon as possible. If a
cartridge is left unprotected outside the printer, its nozzles might dry out and clog up.

60 Chapter 6 Manage cartridges ENWW

7 Copy, scan, and mobile fax

● Copy and scan using HP Smart

● Copy from the printer

● Scan using HP printer software

● Scan using Webscan

● Tips for copy and scan success

● Mobile Fax

ENWW 61
 Copy and scan using HP Smart
● Copy and scan from an Android or iOS device

● Scan from a Windows 10 device

You can use the HP Smart app to copy and scan documents or photos using your device camera. HP Smart
includes editing tools that allow you to adjust the scanned image before saving, sharing, or printing. You can
print, save your scans locally or in cloud storage, and share them via email, SMS, Facebook, Instagram, etc. To
copy and scan with HP Smart, follow the instructions provided in the appropriate section below, depending on
the type of device you are using.

This section provides basic instructions for using the HP Smart app to copy or scan from your Android, iOS,
Windows 10 or Mac device. For more information about using the HP Smart app, go to:

● iOS/Android: www.hp.com/go/hpsmart-help

● Windows 10: www.hp.com/go/hpsmartwin-help

● Mac: http://www.hp.com/go/hpsmartmac-help

Copy and scan from an Android or iOS device

To copy from an Android or iOS device

1. Open the HP Smart app.

2. Tap the Plus icon if you need to change to a different printer, or add a new printer.

3. Tap Copy. The built-in camera will open.

4. Put a document or photo in front of the camera, select a size option to help identifying the size of the
original, and then tap the round button at the bottom of the screen to take a picture.

TIP: For the best result, adjust the camera position to place the original within the provided frame on
the preview screen.

5. Set the number of copies or make other adjustments if necessary:

● Tap the Add Pages icon to add more documents or photos.

● Tap the Delete icon to remove documents or photos.

● Tap Resize to adjust how to fill the original to the paper.

6. Tap Start Black or Start Color to make a copy.

To scan from an Android or iOS device

1. Open the HP Smart app.

2. Tap the Plus icon if you need to change to a different printer, or add a new printer.

3. Select a scan option, and then tap Camera. The built-in camera will open. Scan your photo or document
using the camera.

4. When you have finished adjusting the scanned document or photo, save, share, or print it.

62 Chapter 7 Copy, scan, and mobile fax ENWW

Scan from a Windows 10 device
To scan a document or photo using the device camera

If your device has a camera, you can use the HP Smart app to scan a printed document or photo with the
device camera. You can then use HP Smart to edit, save, print or share the image.

1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 32.

2. Select Scan, and then select Camera.

3. Put a document or photo in front of the camera, and then click or tap the round button at the bottom of
the screen to take an image.

4. Adjust boundaries if needed. Click or tap the Apply icon.

5. Make other adjustments if necessary:

● Click or tap Add Pages to add more documents or photos.

● Click or tap Edit to rotate or crop the document or image, or adjust its contrast, brightness,
saturation, or angle.

6. Select the file type you want, and then click or tap the Save icon to save it or click or tap the Share icon
to share it with others.

To edit a previously scanned document or photo

HP Smart provides editing tools, such as crop or rotate, so that you can use to adjust a previously scanned
document or photo on your device.

1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 32.

2. Select Scan, and then select Import.

3. Select the document or photo that you want to adjust, and then click or tap Open.

4. Adjust boundaries if needed. Click or tap the Apply icon.

5. Make other adjustments if necessary:

● Click or tap Add Pages to add more documents or photos.

● Click or tap Edit to rotate or crop the document or image, or adjust its contrast, brightness,
saturation, or angle.

6. Select the file type you want, and then click or tap Save or Share to save the file or share it with others.

ENWW Copy and scan using HP Smart 63

 Copy from the printer
From the scanner glass

1. Load paper in the input tray.

For information about how to load paper, see Load media on page 12.

2. Load the original print side down on the front-right corner of the scanner glass.

For more information, see Load original on page 15.

3. Press either the Start Copy Black button ( ) or the Start Copy Color button ( ) to make a copy.

Copying will start two seconds after the last button press.

TIP: You can increase the number of copies by pressing the button multiple times.

64 Chapter 7 Copy, scan, and mobile fax ENWW

Scan using HP printer software
● Scan to a computer

● Scan to email

● Create a new scan shortcut (Windows)

● Change scan settings (Windows)

Scan to a computer
Before scanning to a computer, make sure you have already installed the HP recommended printer software.
The printer and computer must be connected and turned on.

To scan an original from HP printer software (Windows)

1. Load the original into the document feeder or on the scanner glass. For information about how to load
paper, see Load original on page 15.

2. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

3. In the printer software, click Scan , and then click Scan a Document or Photo .

4. Under Scan Shortcuts, select the type of scan you want, and then click Scan .

NOTE: The initial screen allows you to review and modify basic settings. Click the More link at the top
right corner of the Scan dialog to review and modify detailed settings.

For more information, see Change scan settings (Windows) on page 66.

Scan to email
To scan a document or photo to email from HP printer software (Windows)

1. Load the original into the document feeder or on the scanner glass. For information about how to load
paper, see Load original on page 15.

2. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

3. In the printer software, click Scan , and then click Scan a Document or Photo .

4. Under Scan Shortcuts, select Email as PDF or Email as JPEG , and then click Scan .

NOTE: The initial screen allows you to review and modify basic settings. Click the More link at the top
right corner of the Scan dialog to review and modify detailed settings.

For more information, see Change scan settings (Windows) on page 66.

If Show Viewer After Scan is selected, you can make adjustments to the scanned image in the preview
screen.

ENWW Scan using HP printer software 65

 Create a new scan shortcut (Windows)
You can create your own scan shortcut to make scanning easier. For example, you might want to regularly
scan and save photos in PNG format, rather than JPEG.

1. Load the original into the document feeder or on the scanner glass. For information about how to load
paper, see Load media on page 12

2. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

3. In the printer software, click Scan , and then click Scan a Document or Photo .

4. Click Create New Scan Shortcut .

5. Enter a descriptive name, choose an existing shortcut on which to base your new shortcut, and then click
Create .

For example, if you are creating a new shortcut for photos, choose either Save as JPEG or Email as
JPEG . This makes available the options for working with graphics when scanning.

6. Change the settings for your new shortcut to meet your needs, and then click the save icon to the right
of the shortcut.

NOTE: The initial screen allows you to review and modify basic settings. Click the More link at the top
right corner of the Scan dialog to review and modify detailed settings.

For more information, see Change scan settings (Windows) on page 66.

Change scan settings (Windows)

You can modify any of the scan settings either for a singular use or save the changes to use permanently.
These settings include options such as page size and orientation, scan resolution, contrast, and the folder
location for saved scans.

1. Load the original into the document feeder or on the scanner glass. For information about how to load
paper, see Load media on page 12

2. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 33.

3. In the printer software, click Scan , and then click Scan a Document or Photo .

4. Click the More link in the top right corner of the HP Scan dialog.

The detailed settings pane appears on the right. The left column summarizes the current settings for
each section. The right column allows you to change the settings in the highlighted section.

5. Click each section at the left of the detailed settings pane to review the settings in that section.

You can review and change most settings using drop-down menus.

Some settings allow greater flexibility by displaying a new pane. These are indicated by a + (plus sign) at
the right of the setting. You must either accept or cancel any changes on this pane to return to the
detailed settings pane.

6. When you have finished changing settings, do one of the following.

66 Chapter 7 Copy, scan, and mobile fax ENWW

 ● Click Scan . You are prompted to save or reject the changes to the shortcut after the scan is
finished.

● Click the save icon to the right of the shortcut. It saves the changes into the shortcut so that you
can reuse them. Otherwise, the changes only affect the current scan. Then click Scan .

Learn more about using the HP Scan software. Click here to go online for more information. At this time,
this website might not be available in all languages.

● Customize scan settings, such as image file type, scan resolution, and contrast levels.

● Scan to network folders and cloud drives.

● Preview and adjust images before scanning.

ENWW Scan using HP printer software 67

 Scan using Webscan
Webscan is a feature of the embedded web server that lets you scan photos and documents from your printer
to your computer using a web browser.

This feature is available even if you did not install the printer software on your computer.

For more information, see Open the embedded web server on page 35.

NOTE: By default, Webscan is off. You can enable this feature from the EWS.

If you are unable to open Webscan in the EWS, your network administrator might have turned it off. For more
information, contact your network administrator or the person who set up your network.

To enable Webscan

1. Open the embedded web server. For more information, see Open the embedded web server on page 35.

2. Click the Settings tab.

3. In the Security section, click Administrator Settings.

4. Select Webscan from EWS to enable Webscan.

5. Click Apply.

To scan using Webscan

Scanning using Webscan offers basic scan options. For additional scan options or functionality, scan from the
HP printer software.

1. Load the original print side down on the front-right corner of the scanner glass.

2. Open the embedded web server. For more information, see Open the embedded web server on page 35.

3. Click the Scan tab.

4. Click Webscan in the left pane, change any settings, and then click Start Scan .

68 Chapter 7 Copy, scan, and mobile fax ENWW

Tips for copy and scan success
Use the following tips to copy and scan successfully:

● Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the glass as
part of the image.

● Load the original print side down on the front-right corner of the scanner glass.

● To make a large copy of a small original, scan the original into the computer, resize the image in the
scanning software, and then print a copy of the enlarged image.

● If you want to adjust scan size, output type, scan resolution, or file type, and so on, start scan from the
printer software.

● To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the
software.

ENWW Tips for copy and scan success 69

 Mobile Fax
Use the HP Smart app to quickly scan and fax multiple pages at once from your mobile device or computer.
The HP Smart app will securely send your fax.

For more information about Mobile Fax, visit the HP Smart website.

Use Mobile Fax in the HP Smart app

1. Make sure your mobile device or computer are connected to a network. Launch the HP Smart app and
sign into or create your HP Account.

2. Select the Mobile Fax tile.

If you do not see the Mobile Fax tile, enable it as follows:

● On a mobile device: Tap Personalize Tiles, tap the Mobile Fax toggle to enable the tile, and then go
back to the Home screen.

● On a Windows 10/Mac device: Click the Settings , select Personalize Tiles, and click the Mobile Fax
toggle to enable the tile. Then, go back to the Home screen.

NOTE: Mobile Fax is available in specific countries/regions. If you do not see a Mobile Fax option in the
Personalize Menu, Mobile Fax might not be available in your country/region.

3. Fill out the necessary mobile fax information.

4. To add a cover page, tap the Add a cover page toggle, and then type a subject and message

5. Scan the item you want to fax using your printer or mobile device camera, or attach a supported file
type. Send the fax when ready.

Your fax will be securely delivered and you can track the status in the HP Smart app.

70 Chapter 7 Copy, scan, and mobile fax ENWW

8 Use Web Services

● What are Web Services?

● Set up Web Services

● Print with HP ePrint

● Remove Web Services

ENWW 71
 What are Web Services?
The printer offers innovative, web-enabled solutions that can help you quickly access the Internet, obtain
documents, and print them faster and with less hassle—and all without using a computer.

NOTE: To use these web features, the printer must be connected to the Internet (using wireless
connection). You cannot use these web features if the printer is connected using a USB cable.

HP ePrint

● HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer anytime,
from any location. It's as simple as sending an email to the email address assigned to your printer when
you enable Web Services on the printer. No special drivers or software are needed. If you can send an
email, you can print from anywhere, using Print Anywhere.

NOTE: Use your HP Account (might not be available in all countries/regions), to sign in and configure
the HP ePrint settings.

Once you have signed up for an account on HP Smart website, you can sign in to view your HP ePrint job
status, manage your HP ePrint printer queue, control who can use your printer's HP ePrint email
address to print, and get help for HP ePrint.

72 Chapter 8 Use Web Services ENWW

Set up Web Services
Before you set up Web Services, make sure your printer is connected to the Internet using a wireless
connection.

To set up Web Services

1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 35.

2. Click the Web Services tab.

3. In the Web Services Settings section, click Setup , click Continue, and follow the onscreen instructions
to accept the terms of use.

4. If prompted, choose to allow the printer to check for and install printer updates.

NOTE: If prompted for a password, enter the PIN from the label on your printer. It might be near the
cartridge access area inside the printer or on the back, side, or bottom of the printer.

NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen
instructions to set up a proxy server. If you do not have the details, contact your network administrator
or the person who set up the network.

NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts.
Repeat the instructions above to set up Web Services.

5. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.

ENWW Set up Web Services 73

 Print with HP ePrint
HP ePrint allows you to print to your HP ePrint-enabled printer anytime, from any location.

Before you can use HP ePrint, make sure the printer is connected to an active network providing Internet
access.

To print a document using HP ePrint

1. Make sure you have set up Web Services.

For more information, see Set up Web Services on page 73.

2. Press the Information button ( ) and Cancel button ( ) at the same time to print an information
page, and then find the email address for your printer from the page.

3. Email your document to the printer.

a. On your computer or mobile device, open your email application.

NOTE: For information about using the email application on your computer or mobile device, see
the documentation provided with the application.

b. Create a new email and attach the document to print.

c. Send the email to the printer email address.

The printer prints the attached document.

NOTE:

● Enter only the HP ePrint email address in the "To" field. Do not enter any additional email
addresses in the other fields. The HP ePrint server does not accept email print jobs if there are
multiple addresses in the "To" field or any address in the "Cc" field."

● The email will be printed once it is received. As with any email, there is no guarantee when or
whether it will be received. You can check the print status on HP Smart website (might not be
available in all countries/regions).

● Documents printed with HP ePrint may appear different from the original. Style, formatting, and
text flow may differ from the original document. For documents that need to be printed with a
higher quality (such as legal documents), we recommend that you print from the software
application on your computer, where you will have more control over what your printout looks like.

74 Chapter 8 Use Web Services ENWW

Remove Web Services
To remove Web Services, complete the following steps:

1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 35.

2. Click the Web Services tab, and then click Remove Web Services in the Web Services Settings section.

3. Click Remove Web Services.

4. Click Yes to remove Web Services from your printer.

ENWW Remove Web Services 75

76 Chapter 8 Use Web Services ENWW
9 Solve a problem

This section contains the following topics:

● Get help from the HP Smart app

● Get help in this guide

● HP support

ENWW 77
 Get help from the HP Smart app
The HP Smart app provides alerts for printer issues (jams and other problems), links to help content, and
options to contact support for additional assistance.

Get help in this guide

This section contains the following topics:

● Jams and paper-feed issues

● Cartridge issues

● Printing issues

● Network and connection issues

● Printer hardware issues

● Control panel error codes and status

Jams and paper-feed issues

● Clear a paper jam

● Learn how to avoid paper jams

● Solve paper-feed problems

Clear a paper jam

NOTE: Paper jams can occur in several areas. Clear paper jam from the input tray first. It helps to clear the
paper path and make clearing jams from other areas easier. Then continue to the next area until all paper
jams are located and cleared.

To clear a paper jam from the input tray

1. Remove all the paper from the input tray, including both loose and jammed paper.

78 Chapter 9 Solve a problem ENWW

 2. Lift and hold the input tray shield, and then use a flashlight to check for any jammed paper or foreign
objects in the paper path. Remove any jammed paper or foreign objects you find.

To avoid tearing any whole sheets of paper, pull the paper with both hands gently.

NOTE: The input tray shield can prevent foreign debris from falling into the paper path and causing
serious paper jams. Do not remove the input tray shield.

3. Press the Cancel button ( ). The printer tries to clear the jam automatically.

To clear a paper jam from the output tray

1. Remove all the paper from the output tray, including both loose and jammed paper.

2. Use a flashlight to check for any jammed paper or foreign objects in the output tray area, and then
remove any jammed paper or foreign objects you find.

To avoid tearing any whole sheets of paper, pull the paper with both hands gently.

To clear a paper jam from the cartridge access area

1. Press the Cancel button ( ) to try to clear the jam automatically. If this does not work, complete the
following steps to clear the jam manually.

ENWW Get help in this guide 79

 2. Open the cartridge access door.

3. Wait until the carriage is idle and silent.

4. Press the Power button ( ) to turn off the printer. Then disconnect the power cord and any other
cables from the rear of the printer.

CAUTION: To avoid the risk of electrical shock, you must unplug the power cord to move the carriage
by hand and reset the paper feed mechanism.

5. Use a flashlight to check for any jammed paper or foreign objects in the cartridge access area and
remove them.

To avoid tearing any whole sheets of paper, pull the paper with both hands gently.

6. If the carriage is in the center of the printer, slide it to the right, and then remove any paper or objects
blocking the carriage path.

80 Chapter 9 Solve a problem ENWW

 7. Close the cartridge access door.

8. Reconnect the power cord and any other cables to the rear of the printer, and then press the Power
button ( ) to turn on the printer.

To clear a paper jam from underneath the printer

1. Press the Cancel button ( ) to try to clear the jam automatically. If this does not work, complete the
following steps to clear the jam manually.

2. Press the Power button ( ) to turn off the printer. Then disconnect the power cord and any other
cables from the rear of the printer.

3. Lower the input tray back into the printer, close the output tray extender, and then push the output tray
into the printer.

4. Turn the printer over, locate the cleanout door on the bottom of the printer, and then pull both tabs on
the cleanout door to open it.

ENWW Get help in this guide 81

 5. Remove the jammed paper.

6. Use a flashlight to check for torn pieces of jammed paper inside the cleanout area, and then remove any
jammed paper you find.

7. Close the cleanout door. Gently push the door towards the printer until both latches snap into place.

8. Turn the printer over to its normal position.

9. Reconnect the power cord and any other cables to the rear of the printer, and then press the Power
button ( ) to turn on the printer.

Learn how to avoid paper jams

To help avoid paper jams, follow these guidelines.

● Do not overfill the input tray.

● Remove printed papers from the output tray frequently.

● Ensure that paper loaded in the input tray lays flat, and the edges are not bent or torn.

● Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the
input tray must be the same size and type.

● Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-width
guide does not bend the paper in the input tray.

● Do not force paper too far down in the input tray.

● Do not add paper while the printer is printing. If the printer is about to run out of paper, wait until the out
of paper message appears before adding paper.

82 Chapter 9 Solve a problem ENWW

Solve paper-feed problems
What kind of problem are you having?

● Paper is not picked up from the input tray

– Make sure paper is loaded in the input tray. For more information, see Load media on page 12.

– Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-
width guide does not bend the paper in the input tray.

– Make sure paper in the input tray is not curled. Uncurl paper by bending it in the opposite direction
of the curl.

● Pages are skewing

– Make sure the paper is loaded in the far-right side of the input tray and the paper-width guide is fit
against the left side of the paper.

– Load paper into the printer only when it is not printing.

● Multiple pages are being picked up

– Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-
width guide does not bend the paper in the input tray.

– Make sure the input tray is not overloaded with paper.

– Make sure the pieces of the loaded paper are not sticking together.

– Use HP paper for optimum performance and efficiency.

Cartridge issues
Identify whether a cartridge has a problem
To identify whether a cartridge has a problem, check the status of the Ink Alert light and the corresponding
Ink Level icon. For more information, see Control panel error codes and status on page 92.

If you get a cartridge problem message from the printer software or the HP Smart app that states at least one
of the cartridges has a problem, do the following to identify whether a cartridge has a problem.

1. Remove the black cartridge and then close the cartridge access door.

● If the Ink Level icon for the tri-color cartridge blinks, the tri-color cartridge has a problem.

● If the Ink Level icon for the tri-color cartridge does not blink, the tri-color cartridge does not have a
problem.

2. Install the black cartridge back in the printer, remove tri-color cartridge, and then close the cartridge
access door.

● If the Ink Level icon for the black cartridge blinks, the black cartridge has a problem.

● If the Ink Level icon for the black cartridge does not blink, the black cartridge does not have a
problem.

ENWW Get help in this guide 83

 Fix cartridge problems
If an error occurs after a cartridge is installed, or if a message indicates a cartridge problem, try removing the
cartridges, verifying the protective piece of plastic tape has been removed from each cartridge, and then
reinserting the cartridges. If this does not work, clean the cartridge contacts. If the problem is still not
resolved, replace the cartridges. For information about replacing cartridges, see Replace cartridges
on page 56.

To clean cartridge contacts

CAUTION: The cleaning procedure should take only a few minutes. Make sure that the cartridges are
reinstalled in the printer as soon as possible. It is not recommended to leave the cartridges outside the printer
longer than 30 minutes. If cartridges are left unprotected outside the printer, their nozzles might dry out and
clog up.

1. Check that power is on.

2. Open the cartridge access door and wait for the print carriage to move to the center of the printer.

3. Remove the cartridge indicated in the error message.

4. Clean the cartridge contacts and printer contacts.

a. Hold the cartridge by its sides with the bottom pointing up and locate the electrical contacts on the
cartridge.

The electrical contacts are the small gold-colored dots on the cartridge.

84 Chapter 9 Solve a problem ENWW

 b. Wipe only the contacts with a dry swab or lint-free cloth.

CAUTION: Be careful to wipe only the contacts, and do not smear any of the ink or other debris
elsewhere on the cartridge.

c. On the inside of the printer, locate the contacts for the cartridge.

The printer contacts are the set of gold-colored bumps positioned to meet the contacts on the
cartridge.

d. Use a dry swab or lint-free cloth to wipe the contacts.

5. Reinstall the cartridge.

6. Close the cartridge access door.

7. Check if the error message has gone away. If you still receive the error message, turn the printer off, and
then on.

NOTE: If one cartridge is causing problems, you can remove it and use the single cartridge mode to operate
the printer with only one cartridge.

Printing issues
● Fix problems with page not printing (unable to print)

● Fix print quality issues

Fix problems with page not printing (unable to print)

To resolve print issues (Windows)

Make sure that the printer is turned on and that there is paper in the input tray. If you are still unable to print,
try the following in order:

1. Check for error messages from the printer software and resolve them by following the onscreen
instructions.

2. If your computer is connected to the printer with a wireless connection, confirm that the connection is
working.

ENWW Get help in this guide 85

 3. Verify that the printer is not paused or offline.

To verify that the printer is not paused or offline

a. Depending upon your operating system, do one of the following:

● Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.

● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.

● Windows 7: From the Windows Start menu, click Devices and Printers.

b. Either double-click the icon for your printer or right-click the icon for your printer and select See
what's printing to open the print queue.

c. On the Printer menu, make sure there are no check marks next to Pause Printing or Use Printer
Offline.

d. If you made any changes, try to print again.

4. Verify that the printer is set as the default printer.

To verify that the printer is set as the default printer

a. Depending upon your operating system, do one of the following:

● Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.

● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.

● Windows 7: From the Windows Start menu, click Devices and Printers.

b. Make sure the correct printer is set as the default printer.

The default printer has a check mark in a black or green circle next to it.

c. If the wrong printer is set as the default printer, right-click the correct printer and select Set as
Default Printer.

d. Try using your printer again.

5. Restart the print spooler.

To restart the print spooler

a. Depending upon your operating system, do one of the following:

Windows 10

i. From the Windows Start menu, select Windows Administrative Tools from the app list, and
then select Services.

ii. Right-click the Print Spooler, and then click Properties.

86 Chapter 9 Solve a problem ENWW

 iii. On the General tab, next to Startup type, make sure that Automatic is selected.

iv. If the service is not already running, under Service status, click Start, and then click OK.

Windows 8.1 and Windows 8

i. Point to or tap the upper-right corner of the screen to open the Charms bar, and then click the
Settings icon.

ii. Click or tap Control Panel, and then click or tap System and Security.

iii. Click or tap Administrative Tools, and then double-click or double-tap Services.

iv. Right-click or touch and hold Print Spooler, and then click Properties.

v. On the General tab, next to Startup type, make sure that Automatic is selected.

vi. If the service is not already running, under Service status, click or tap Start, and then click or
tap OK.

Windows 7

i. From the Windows Start menu, click Control Panel, System and Security, and then
Administrative Tools.

ii. Double-click Services.

iii. Right-click the Print Spooler, and then click Properties.

iv. On the General tab, next to Startup type, make sure that Automatic is selected.

v. If the service is not already running, under Service status, click Start, and then click OK.

b. Make sure the correct printer is set as the default printer.

The default printer has a check mark in a black or green circle next to it.

c. If the wrong printer is set as the default printer, right-click the correct printer and select Set as
Default Printer.

d. Try using your printer again.

6. Restart the computer.

7. Clear the print queue.

To clear the print queue

a. Depending upon your operating system, do one of the following:

● Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.

● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.

● Windows 7: From the Windows Start menu, click Devices and Printers.

b. Double-click the icon for your printer to open the print queue.

ENWW Get help in this guide 87

 c. On the Printer menu, click Cancel all documents or Purge Print Document, and then click Yes to
confirm.

d. If there are still documents in the queue, restart the computer and try printing again after the
computer has restarted.

e. Check the print queue again to make sure it is clear, and then try to print again.

To resolve print issues (OS X and macOS)

1. Check for error messages and resolve.

2. Disconnect and reconnect the USB cable.

3. Verify that the product is not paused or offline.

To verify that the product is not paused or offline

a. In System Preferences, click Printers & Scanners .

b. Click the Open Print Queue button.

c. Click a print job to select it.

Use the following buttons to manage the print job:

● Delete: Cancel the selected print job.

● Hold: Pause the selected print job.

● Resume: Continue a paused print job.

● Pause Printer: Pause all print jobs in the print queue.

d. If you made any changes, try to print again.

4. Restart the computer.

Fix print quality issues

NOTE: To protect the cartridges from drying out, always turn the printer off using the Power button, and
wait until the Power button light goes out.

To improve print quality (Windows)

1. Make sure you are using original HP cartridges.

2. Check the paper type.

For best print quality, use high quality HP paper, or papers that adhere to the ColorLok® standard. For
more information, see Paper basics on page 17.

Always make sure the paper you are printing on is flat. For best results when printing images, use HP
Advanced Photo Paper.

Store specialty paper in its original packaging inside a resealable plastic bag on a flat surface in a cool,
dry place. When you are ready to print, remove only the paper you plan to use immediately. When you
have finished printing, return any unused photo paper to the plastic bag. This prevents the photo paper
from curling.

88 Chapter 9 Solve a problem ENWW

 3. Check the printer software to make sure you have selected the appropriate paper type from the Media
drop-down list and print quality from the Quality Settings drop-down list.

In the printer software, click Print & Scan , and then click Set Preferences to access the print properties.

4. Check the estimated ink levels to determine if the cartridges are low on ink.

For more information, see Check estimated ink levels on page 53. If the cartridges are low on ink
consider replacing them.

5. Align the cartridges.

To align the cartridges

a. Load letter or A4 unused plain white paper into the input tray.

b. Open the printer software. For more information, see Open the HP printer software (Windows)
on page 33.

c. In the printer software, click Print & Scan and then click Maintain Your Printer to access the
printer toolbox.

The printer toolbox appears.

d. Click Align Cartridges on the Device Services tab.

The printer prints an alignment page.

e. Follow the onscreen instructions to align the cartridges. Recycle or discard the cartridge alignment
sheet later.

6. Print a diagnostics page if the cartridges are not low on ink.

To print a diagnostics page

a. Load letter or A4 unused plain white paper into the input tray.

b. Open the printer software. For more information, see Open the HP printer software (Windows)
on page 33.

c. In the printer software, click Print & Scan and then click Maintain Your Printer to access the
printer toolbox.

d. Click Print Diagnostic Information on the Device Reports tab to print a diagnostics page.

ENWW Get help in this guide 89

 e. Examine the color blocks on the diagnostics page.

If any of the color blocks show white lines, are faded, or are missing completely, continue to the
next step.

Figure 9-1 Color blocks without defects

Figure 9-2 Example of color blocks with defects

7. Clean the cartridges.

To clean the cartridges

a. Load letter or A4 unused plain white paper into the input tray.

b. Open the printer software. For more information, see Open the HP printer software (Windows)
on page 33.

c. In the printer software, click Print & Scan and then click Maintain Your Printer to access the
printer toolbox.

d. Click Clean Cartridges on the Device Services tab. Follow the onscreen instructions.

Network and connection issues

● Fix wireless connection

● Fix Wi-Fi Direct connection

Fix wireless connection

Choose one of the following troubleshooting options.

● Verify that the printer and the wireless router are turned on and have power, Also, make sure that the
wireless radio in the printer is turned on. The light next to the Wireless button ( ) should be steady
blue, indicating that the printer is connected. (If the light is blinking, the printer is in setup mode or
attempting to connect).

● Check the Signal Bars icon ( ) on the control panel display. If only one or two bars are showing, the
wireless signal is weak. Verify that the printer is within the range of the wireless network. For most
networks, the printer must be within 30 m (100 ft) of the wireless access point (wireless router).

90 Chapter 9 Solve a problem ENWW

 ● From the printer control panel, press the Wireless button ( ) and the Information button ( ) at
the same time to print the Wireless Network Test Report and Network Configuration Page.

Check the top of the wireless network test report to see if something failed during the test.

– See the DIAGNOSTICS RESULTS section for all tests that were performed, to determine whether or
not your printer passed. If there are issues, perform the recommended steps listed in the report,
and then try using your printer again.

– From the CURRENT CONFIGURATION section, find out the Network Name (SSID) to which your
printer is currently connected. Make sure that the printer is connected to the same network as your
computer or mobile devices.

● Restore network settings and then reconnect the printer. See Connect using the HP Smart app
on page 20.

● From HP Smart help center, find printer connection help, and then follow onscreen instructions.

● If you are printing from a Windows computer, try using the HP Print and Scan Doctor utility to diagnose
and fix the issue automatically.

● To determine if a firewall or antivirus program is preventing your computer from connecting to the
printer and find resolutions, use the HP online firewall troubleshooter .

● For more information about troubleshooting wireless network connection issues, visit the following
website: www.hp.com/go/wirelessprinting.

Fix Wi-Fi Direct connection

1. Make sure that the Wi-Fi Direct icon on the printer control panel is on. If it is off, press and hold the
Wireless button ( ) and the Resume button ( ) together for three seconds to turn it on.

2. From your wireless computer or mobile device, turn on the Wi-Fi connection, and then search for and
connect to the Wi-Fi Direct name of your printer.

If you are using a mobile device that does not support Wi-Fi Direct, make sure you have installed a
compatible printing app. For more information, visit the HP Mobile Printing website at www.hp.com/go/
mobileprinting. If a local version of this website is not available in your country/region or language, you
might be directed to the HP Mobile Printing website in another country/region or language.

NOTE: If your mobile device does not support Wi-Fi, you are not able to use Wi-Fi Direct.

3. If the Wi-Fi Direct connection security for the printer is set to Manual, do one of the following to connect
to the printer.

● Make sure to enter the correct Wi-Fi Direct password or PIN code when prompted.

● If the Wi-Fi Direct icon on the printer display is blinking in sync with the white blinking Information
light, make sure to press the Information button ( ) within one minute to connect before
timeout.

4. Make sure that the number of Wi-Fi Direct connections has not reached the maximum of five devices.

5. Get more assistance online to resolve Wi-Fi Direct issues.

ENWW Get help in this guide 91

 Printer hardware issues
TIP: Run the HP Print and Scan Doctor. to diagnose and automatically fix printing, scanning, and copying
issues. The application is available only in some languages.

Close cartridge access door

● Cartridge access door must be closed to begin printing.

The printer shuts down unexpectedly

● Check the power and power connections.

● Make sure the power cord of the printer is connected firmly to a functioning power outlet.

NOTE: When Auto-Off is enabled, the printer will automatically turn off after two hours of inactivity to help
reduce energy use. For more information, see Auto-Off on page 39.

Resolve printer failure

● Turn the printer off, then on. If that does not resolve the problem, contact HP.

Control panel error codes and status

NOTE: The HP Smart app provides detailed information for printer warnings and errors. Open the app and
check the printer status, and then follow the onscreen instructions to fix the issue. Then check the following
for additional assistance if needed.

● Control panel error codes

● Control panel ink error status

● Control panel paper error status

Control panel error codes

If the Number of copies icon on the printer display changes to a number, blinking together with the letter E at
the left side, it indicates the printer is in an error state. The letter E and the number work as error codes.

92 Chapter 9 Solve a problem ENWW

 Light behavior Cause and Solution

The letter E and the number 0 are blinking. At the same time, one There is a problem with the indicated cartridges. Check for an
or both of the Ink Level icons are blinking and the Ink Alert light error message in the HP Smart app or in the printer software and
is blinking. resolve it by following the on-screen instructions.

The letter E and the number 1 are blinking. At the same time, the The printer receives a printing job, starts feeding paper, and
Resume light is blinking. detects that the paper width for the printing job is bigger than the
width of the loaded paper.

Press either the Resume button ( ) or the Cancel button

( ) to cancel the printing job and eject paper.

To avoid the paper size mismatch problem, do one of the

following before printing.

● Change the paper size setting for the printing job to match
the paper loaded.

● Remove all paper from the input tray, and then load paper
that matches the paper size setting for the printing job.

TIP: You can change the default paper size automatically

detected by the printer. For more information, see Change the
default paper size detected by printer on page 16.

The letter E and the number 2 are blinking. At the same time, the The printer receives a multipage printing job, detects that the
Resume light is blinking. paper length for the printing job does not match the length of the
loaded paper, and then prints out the first page of the job with
errors.

● To cancel the printing job, press the Cancel button ( ).

● To continue printing the remaining pages, press the Resume

button ( ). The remaining pages will have the same

errors as the first page.

TIP: You can change the default paper size automatically

detected by the printer. For more information, see Change the
default paper size detected by printer on page 16.

ENWW Get help in this guide 93

 Light behavior Cause and Solution

The letter E and the number 3 are blinking. At the same time, the The carriage inside the printer has stalled.
Resume light and the Ink Alert light are blinking.
Open the cartridge access door and make sure the carriage is not
obstructed. Move the carriage to the right, close the cartridge
access door, and then press the Resume button ( ) to

continue printing. See Jams and paper-feed issues on page 78 for

more information.

The letter E and the number 4 are blinking. At the same time, the There is a paper jam.
Resume light is blinking.
Clear the jam, and then press the Resume button ( ) to

continue printing.

For more information, see Jams and paper-feed issues

on page 78.

The letter E and the number 5 are blinking. At the same time, all The scanner is not working.
lights on the control panel are blinking.
Turn off the printer, and then turn it on again.

If the problem persists, contact HP. The printer still prints even if
the scanner is not working.

The letter E and the number 6 are blinking. The printer is in an error state.

1. Turn off the printer.

2. Unplug the power cord.

3. Wait a minute, and then plug the power cord back in.

4. Turn on the printer.

If the problem persists, contact HP.

Control panel ink error status

Light behavior Cause and Solution

One of the Ink Level icons without segment and the Error icon are One of the following might have occurred.
blinking, and the Ink Alert light is on.
● The corresponding cartridge is missing.

If one of the cartridges is missing, the printer enters single

cartridge mode. To exit the single cartridge mode, insert the
corresponding cartridge. For more information about the

94 Chapter 9 Solve a problem ENWW

 Light behavior Cause and Solution

single cartridge mode, see Use single cartridge mode

on page 58.

● The corresponding cartridge is installed improperly, or still

has plastic tape on it.

Remove the corresponding cartridge, make sure there is no

plastic tape on it, and then reinsert the cartridge securely.
For more information, see Replace cartridges on page 56.

Both Ink Level icons without segment, the Error icon, and the Ink One of the following might have occurred.
Alert light are blinking.
● Both cartridges are missing.

● Both cartridges are installed improperly, or still have plastic

tape on them.

● Both cartridges are incompatible or damaged.

Try the following solutions to solve the problem.

● If there is no cartridge installed in the printer, install the

cartridges.

● If both cartridges are installed in the printer, remove the

cartridges, make sure there is no plastic tape on them, and
then reinsert the cartridges securely.

● Make sure that you are using the correct HP cartridges for
your printer.

● If the error persists, replace the cartridges. For information

about how to replace cartridges, see Replace cartridges
on page 56.

ENWW Get help in this guide 95

 Light behavior Cause and Solution

One of the Ink Level icons without segment, the Error icon, and One of the following might have occurred.
the Resume light are blinking, and the Ink Alert light is on.
● The counterfeit or previously used cartridge is installed.

● The corresponding cartridge is very low on ink.

Try the following solutions to solve the problem.

● If the corresponding cartridge is newly installed, it might be

counterfeit or previously used. Refer to the message in the
HP printer software for more information.

● If the corresponding cartridge is not newly installed, it is

very low on ink. Press the Resume button ( ) to

continue printing, and replace the cartridge when the print

quality is no longer acceptable. For information about how
to replace cartridges, see Replace cartridges on page 56.

Both Ink Level icons without segment, the Error icon, and the One of the following might have occurred.
Resume light are blinking, and the Ink Alert light is on.
● The counterfeit or previously used cartridges are installed.

● Both of the cartridges are very low on ink.

Try the following solutions to solve the problem.

● If the cartridges are newly installed, they might be

counterfeit or previously used. Refer to the message in the
HP printer software for more information.

● If the cartridges are not newly installed, they are very low on
ink. Press the Resume button ( ) to continue printing,

and replace the cartridges when the print quality is no

longer acceptable. For information about how to replace
cartridges, see Replace cartridges on page 56.

Control panel paper error status

Light behavior Cause and Solution

The Error icon, the Paper Error icon, and the Resume light are on. There is no paper in the input tray.

Load paper in the input tray.

For information about how to load paper, see Load media

on page 12.

The Error icon, the Paper Error icon, and the Resume light are The printer receives a printing job, and detects that there is no
blinking. paper in the input tray.

Load paper, and then press the Resume button ( ) to

continue printing.

For information about how to load paper, see Load media

on page 12.

96 Chapter 9 Solve a problem ENWW

HP support
For the latest product updates and support information, visit the product support website at
www.support.hp.com. HP online support provides a variety of options for help with your printer:

Get troubleshooting assistance: Find information for resolving paper jams, network connection issues, print
quality issues, printer errors, and more.

Get software and drivers: Download software, drivers, and firmware you need for the printer.

Ask the community: Join the community forums to find solutions, ask questions, and share tips.

HP Diagnostics Solutions: Use HP online tools to detect your printer and find recommended solutions. For
Windows operating systems, you can automatically diagnose and resolve printer issues with HP Print and Scan
Doctor.

NOTE: You can also find help online by visiting the Printer Essentials webpage. Here you can find links to
install the HP Smart app, purchase replacement ink for your printer (including HP Instant Ink, if applicable),
and get help with common printer tasks.

Contact HP
If you need help from an HP technical support representative to solve a problem, visit the Contact Support
website. The following contact options are available at no cost for in-warranty customers (HP agent-assisted
support for out-of warranty customers may require a fee):

Chat with an HP support agent or the HP Virtual Agent online.

Call an HP support agent.

When contacting HP support, be prepared to provide the following information:

● Product name (Located on the printer)

ENWW HP support 97
 ● Product number and serial number (located inside the cartridge access door)

Register printer
By taking just a few minutes to register, you can enjoy quicker service, more efficient support, and product
support alerts. If you did not register your printer while installing the software, you can register now at
http://www.register.hp.com.

Additional warranty options

Extended service plans are available for the printer at additional costs. Go to www.support.hp.com, select
your country/region and language, then explore the extended warranty options available for your printer.

98 Chapter 9 Solve a problem ENWW

10 HP EcoSolutions (HP and the Environment)

HP is committed to helping you optimize your environmental footprint and empowering you to print
responsibly—at home or in the office.

For more detailed information about environmental guidelines that HP follows during the manufacturing
process, see Environmental stewardship program on page 110. For more information about HP's
environmental initiatives, visit www.hp.com/ecosolutions.

ENWW 99
 Energy Save Mode
Power usage is reduced while in Energy Save Mode.

After initial setup of printer, the printer will enter Energy Save Mode after 5 minutes of inactivity.

To change the time to Energy Save Mode from an Android or iOS device

1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 32.

2. Tap Printer Settings.

3. Tap Advanced Settings, and tap Energy Save Mode to change the setting.

To change the time to Energy Save Mode from the embedded web server (EWS)

1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 35.

2. Click the Settings tab.

3. In the Power Management section, click Energy Save Mode, and select the desired option.

4. Click Apply.

100 Chapter 10 HP EcoSolutions (HP and the Environment) ENWW

A Technical information

The technical specifications and international regulatory information for the HP DeskJet 2700 series are
provided in this section.

For additional specifications, see the printed documentation that came with the HP DeskJet 2700 series.

This section contains the following topics:

● HP Company notices

● Specifications

● Regulatory notices

● Environmental stewardship program

ENWW 101
 HP Company notices
The information contained herein is subject to change without notice.

All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior
written permission of HP, except as allowed under the copyright laws. The only warranties for HP products
and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical
or editorial errors or omissions contained herein.

© Copyright 2020 HP Development Company, L.P.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.

102 Appendix A Technical information ENWW

Specifications
Technical specifications for the HP DeskJet 2700 series are provided in this section. For more product
specifications, see the Product Data Sheet at www.support.hp.com.

System requirements

● For information about software and system requirements or future operating system releases and
support, visit the HP online support website at www.support.hp.com.

Environmental specifications

● Recommended operating temperature range: 15°C to 30°C (59°F to 86°F)

● Allowable operating temperature range: 5°C to 40°C (41°F to 104°F)

● Nonoperating (Storage) temperature range: –40°C to 60°C (–40°F to 140°F)

● Recommended operating humidity range: 20-80% RH (non-condensing)

● Allowable operating humidity range: 15-80% RH (non-condensing)

● Allowable non-operating (storage) humidity range: 5-90% RH (non-condensing)

● In the presence of high electromagnetic fields, it is possible the output from the HP DeskJet 2700 series
may be slightly distorted

● HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected
noise due to potential high electromagnetic fields

Input tray capacity

● Plain paper sheets (75 g/m2 [20lb]): Up to 60

● Envelopes: Up to 5

● Index cards: Up to 20

● Photo paper sheets: Up to 20

Output tray capacity

● Plain paper sheets (80 g/m2 [20lb]): Up to 25

● Envelopes: Up to 5

● Index cards: Up to 20

● Photo paper sheets: Up to 20

Paper size

● For a complete list of supported media sizes, see the printer software.

Paper weights

● Plain Paper: 60 to 90 g/m² (16 to 32 lb)

● Envelopes: 75 to 90 g/m² (20 to 24 lb bond envelope)

ENWW Specifications 103

 ● Cards: Up to 200 g/m²

● Photo Paper: Up to 300 g/m² (145 lb)

Print specifications
● Print speeds vary according to the complexity of the document

● Method: drop-on-demand thermal inkjet

● Language: PCL3 GUI

Copy specifications

● Digital image processing

● Copy speeds vary according to the complexity of the document and model

Scan specifications

● Resolution: Up to 1200 dpi optical

● Color: 24-bit color, 8-bit grayscale (256 levels of gray)

● Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.69 inches)

Print resolution

● For a list of supported print resolutions, visit the product support website at www.support.hp.com.

Cartridge yield

● Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.

Acoustic information

● If you have Internet access, you can access acoustic information from the HP website.

104 Appendix A Technical information ENWW

Regulatory notices
The printer meets product requirements from regulatory agencies in your country/region.

This section contains the following topics:

● Regulatory model number

● FCC statement

● Power cord instructions

● Notice to users in Korea

● Noise emission statement for Germany

● European Union Regulatory Notice

● Visual display workplaces statement for Germany

● Declaration of conformity

● Regulatory wireless statements

Regulatory model number

For regulatory identification purposes, your product is assigned with a Regulatory Model Number. The
regulatory model number should not be confused with the marketing names or product numbers.

FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following
notice be brought to the attention of users of this product.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and the receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

NOTE: If the product has an Ethernet / LAN port with metallic casing then use of a shielded interface cable is
required to comply with the Class B limits of Part 15 of FCC rules.

Modifications (part 15.21)

Any changes or modifications made to this device that are not expressly approved by HP may void the user's
authority to operate the equipment.

ENWW Regulatory notices 105

 For further information, contact: Manager of Corporate Product Regulations, HP Inc, 1501 Page Mill Road,
Palo Alto, CA 94304, U.S.A.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Power cord instructions

Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product.
The product uses either 100-240 Vac or 200-240 Vac and 50/60 Hz.

CAUTION: To prevent damage to the product, use only the power cord that is provided with the product.

Notice to users in Korea

B급 기기 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로
하며, 모든 지역에서 사용할 수 있습니다.
(가정용 방송통신기자재)

Noise emission statement for Germany

Geräuschemission

LpA < 70 dB am Arbeitsplatz im Normalbetrieb nach DIN 45635 T. 19

European Union Regulatory Notice

Products bearing the CE marking comply to applicable EU Directives and related European Harmonised
Standards. The full Declaration of Conformity can be found at the following website:

www.hp.eu/certificates (Search with the product model name or its Regulatory Model Number (RMN), which
may be found on the regulatory label.)

The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany.

Products with wireless functionality

EMF

● This product meets international guidelines (ICNIRP) for exposure to radio frequency radiation.

If it incorporates a radio transmitting and receiving device that in normal use, a separation distance of
20 cm ensures that radio frequency exposure levels comply with EU requirements.

106 Appendix A Technical information ENWW

Wireless functionality in Europe

● For products with 802.11 b/g/n or Bluetooth radio:

– This product operates on radio frequency between 2400 MHz and 2483.5 MHz, with a transmit
power of 20 dBm (100 mW) or less.

● For products with 802.11 a/b/g/n radio:

– This product operates on radio frequencies between 2400 MHz and 2483.5 MHz, and between
5170 MHz and 5710 MHz, with a transmit power of 20 dBm (100 mW) or less.

– CAUTION: IEEE 802.11x wireless LAN with 5.15-5.35 GHz frequency band is
restricted for indoor use only for all countries reflected in the matrix. Using
this WLAN application outdoor might lead to interference issues with existing
radio services.

Visual display workplaces statement for Germany

GS-Erklärung (Deutschland)

Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen.
Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im
unmittelbaren Gesichtsfeld platziert werden.

Declaration of conformity
Declaration of conformity can be found at www.hp.eu/certificates.

Regulatory wireless statements

This section contains the following regulatory information pertaining to wireless products:

● Exposure to radio frequency radiation

● Notice to users in Canada (5 GHz)

● Notice to users in Taiwan (5 GHz)

● Notice to users in Serbia (5 GHz)

● Notice to users in Thailand (5 GHz)

● Notice to users in Mexico

● Notice to users in Brazil

● Notice to users in Taiwan

Exposure to radio frequency radiation

CAUTION: The radiated output power of this device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during normal

ENWW Regulatory notices 107

 operation is minimized. This product and any attached external antenna, if supported, shall be placed in such
a manner to minimize the potential for human contact during normal operation. In order to avoid the
possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be
less than 20 cm (8 inches) during normal operation.

Notice to users in Canada (5 GHz)

CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its
operation in the 5.15- to 5.25-GHz frequency range. The Innovation, Science and Economic Development
Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce
the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated
as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause
interference with and/or damage to this device.

ATTENTION: Lors de l'utilisation du réseau local sans fil IEEE 802.11a, ce produit se limite à une utilisation
en intérieur à cause de son fonctionnement sur la plage de fréquences de 5,15 à 5,25 GHz. Innovation,
Science et Développement Economique Canada stipule que ce produit doit être utilisé en intérieur dans la
plage de fréquences de 5,15 à 5,25 GHz afin de réduire le risque d'interférences éventuellement dangereuses
avec les systèmes mobiles par satellite via un canal adjacent. Le radar à haute puissance est alloué pour une
utilisation principale dans une plage de fréquences de 5,25 à 5,35 GHz et de 5,65 à 5,85 GHz. Ces stations
radar peuvent provoquer des interférences avec cet appareil et l'endommager.

Notice to users in Taiwan (5 GHz)

在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。

應避免影響附近雷達系統之操作。

Notice to users in Serbia (5 GHz)

Upotreba ovog uredjaja je ogranicna na zatvorene prostore u slucajevima koriscenja na frekvencijama od
5150-5350 MHz.

Notice to users in Thailand (5 GHz)

เครือ
่ งวิทยุคมนาคมนี้มรี ะดับการแผ่คลืน
่ แม่เหล็กไฟฟ้ าสอดคล้องตามมาตรฐานความปลอดภัยต่อสุขภาพของมนุษย์จากการ
ใช้เครือ
่ งวิทยุคมนาคมทีค ่ ณะกรรมการกิจการโทรคมนาคมแห่งชาติประกาศกําหนด

This radio communication equipment has the electromagnetic field strength in compliance with the Safety
Standard for the Use of Radio Communication Equipment on Human Health announced by the National
Telecommunications Commission.

Notice to users in Mexico

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o
dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no deseada.

Para saber el modelo de la tarjeta inalámbrica utilizada, revise la etiqueta regulatoria de la impresora.

Notice to users in Brazil

Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência
em sistemas devidamente autorizados.

108 Appendix A Technical information ENWW

Notice to users in Taiwan
低功率電波輻射性電機管理辦法

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變
更設計之特性及功能。

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至
無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫
藥用電波輻射性電機設備之干擾。

ENWW Regulatory notices 109

 Environmental stewardship program
HP is committed to providing quality products in an environmentally sound manner. Design for recycling has
been incorporated into this product. The number of materials has been kept to a minimum while ensuring
proper functionality and reliability. Dissimilar materials have been designed to separate easily. Fasteners and
other connections are easy to locate, access, and remove using common tools. High priority parts have been
designed to access quickly for efficient disassembly and repair. For more information, visit the HP Sustainable
Impact website at: www.hp.com/sustainableimpact

● HP tips for reducing environmental impact

● Eco-Tips

● Paper

● Plastics

● European Union Commission Regulation 1275/2008

● Safety data sheets

● Chemical substances

● EPEAT

● SEPA Ecolabel User Information (China)

● Recycling program

● HP inkjet supplies recycling program

● Power consumption

● China Energy Label for Printer, Fax and Copier

● Disposal of waste equipment by users

● Waste disposal for Brazil

● The Table of Hazardous Substances/Elements and their Content (China)

● Restriction of hazardous substance (India)

● Restriction on hazardous substances statement (Turkey)

● Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan)

● Battery disposal in Taiwan

● European Union Battery Directive

● Battery notice for Brazil

● California Perchlorate Material Notice

● California Rechargeable Battery Take-Back Notice

110 Appendix A Technical information ENWW

HP tips for reducing environmental impact
● Choose from a wide variety of HP papers with FSC® or PEFCTM certification, which indicates that the paper
pulp came from a reputable and well-managed source.1

● Conserve resources-look for paper made with recycled content.

● Recycle your Original HP cartridges-it's easy and free with the HP Planet Partners program, available in
47 countries and territories worldwide.2

● Save paper by printing on both sides of the page.

● Conserve energy by choosing ENERGY STAR® certified HP products.

● Lower your carbon footprint-all HP printers include power management settings that help you control
energy use.

● Discover more ways HP and our customers are reducing environmental impact at www.hp.com/
ecosolutions.
1
HP papers certified under FSC®C017543 or PEFC™TMPEFC/29-13-198.
2
Program availability varies. Original HP cartridge return and recycling is currently available in more
than 50 countries, territories, and regions in Asia, Europe, and North and South America through the HP
Planet Partners program. For more information, visit: www.hp.com/recycle.

Eco-Tips
HP is committed to helping customers reduce their environmental footprint. Please visit the HP Eco Solutions
website for more information on HP’s environmental initiatives.

www.hp.com/sustainableimpact

Paper
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.

Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to
identify plastics for recycling purposes at the end of product life.

European Union Commission Regulation 1275/2008

For product power data, including the power consumption of the product in networked standby if all wired
network ports are connected and all wireless network ports are activated, please refer to section P14
‘Additional Information’ of the product IT ECO Declaration at www.hp.com/hpinfo/globalcitizenship/
environment/productdata/itecodesktop-pc.html.

Safety data sheets

Safety Data Sheets, product safety and environmental information are available at www.hp.com/go/ecodata
or on request.

ENWW Environmental stewardship program 111

 Chemical substances
HP is committed to providing our customers with information about the chemical substances in our products
as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European
Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/
reach.

EPEAT
Most HP products are designed to meet EPEAT. EPEAT is a comprehensive environmental rating that helps
identify greener electronics equipment. For more information on EPEAT go to www.epeat.net. For information
on HP's EPEAT registered products go to www.hp.com/hpinfo/globalcitizenship/environment/pdf/
epeat_printers.pdf.

SEPA Ecolabel User Information (China)

中国环境标识认证产品用户说明

噪声大于 63.0 dB(A) 的办公设备不宜放置于办公室内，请在独立的隔离区域使用。

如需长时间使用本产品或打印大量文件，请确保在通风良好的房间内使用。

如您需要确认本产品处于零能耗状态，请按下电源关闭按钮，并将插头从电源插座断开。

您可以使用再生纸，以减少资源耗费。

Recycling program
HP offers an increasing number of product return and recycling programs in many countries/regions, and
partners with some of the largest electronic recycling centers throughout the world. HP conserves resources
by reselling some of its most popular products. For more information regarding recycling of HP products,
please visit:

www.hp.com/recycle

HP inkjet supplies recycling program

HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in
many countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more
information, go to the following website:

www.hp.com/recycle

Power consumption
HP printing and imaging equipment marked with the ENERGY STAR® logo is certified by the U.S.
Environmental Protection Agency. The following mark will appear on ENERGY STAR certified imaging
products:

112 Appendix A Technical information ENWW

 Additional ENERGY STAR certified imaging product model information is listed at: www.hp.com/go/energystar

China Energy Label for Printer, Fax and Copier

复印机、打印机和传真机能源效率标识实施规则

依据“复印机、打印机和传真机能源效率标识实施规则”，该打印机具有中国能效标识。标识上显示的能效
等级和操作模式值根据“复印机、打印机和传真机能效限定值及能效等级”标准（“GB 21521”）来确定和计
算。

1. 能效等级

产品能效等级分 3 级，其中 1 级能效最高。能效限定值根据产品类型和打印速度由标准确定。能效

等级则根据基本功耗水平以及网络接口和内存等附加组件和功能的功率因子之和来计算。

2. 能效信息

喷墨打印机

– 操作模式功率

睡眠状态的能耗按照 GB 21521 的标准来衡量和计算。该数据以瓦特 (W) 表示。

– 待机功率

待机状态是产品连接到电网电源上功率最低的状态。该状态可以延续无限长时间，且使用者无
法改变此状态下产品的功率。对于“成像设备”产品，“待机”状态通常相当于“关闭”状态，但也可
能相当于“准备”状态或者“睡眠”状态。该数据以瓦特 (W) 表示。

– 睡眠状态预设延迟时间

出厂前由制造商设置的时间决定了该产品在完成主功能后进入低耗模式（例如睡眠、自动关
机）的时间。该数据以分钟表示。

– 附加功能功率因子之和

网络接口和内存等附加功能的功率因子之和。该数据以瓦特 (W) 表示。

标识上显示的能耗数据是根据典型配置测量得出的数据，此类配置包含登记备案的打印机依据复印机、
打印机和传真机能源效率标识实施规则所选的所有配置。因此，该特定产品型号的实际能耗可能与标识
上显示的数据有所不同。

要了解规范的更多详情，请参考最新版的 GB 21521 标准。

Disposal of waste equipment by users

This symbol means do not dispose of your product with your other household waste. Instead,
you should protect human health and the environment by handing over your waste
equipment to a designated collection point for the recycling of waste electrical and electronic
equipment. For more information, please contact your household waste disposal service, or
go to http://www.hp.com/recycle.

ENWW Environmental stewardship program 113

 Waste disposal for Brazil
Este produto eletrônico e seus componentes não devem ser descartados no lixo comum, pois
embora estejam em conformidade com padrões mundiais de restrição a substâncias nocivas,
podem conter, ainda que em quantidades mínimas, substâncias impactantes ao meio
ambiente. Ao final da vida útil deste produto, o usuário deverá entregá-lo à HP. A não
observância dessa orientação sujeitará o infrator às sanções previstas em lei.

Após o uso, as pilhas e/ou baterias dos produtos HP deverão ser entregues ao
estabelecimento comercial ou rede de assistência técnica autorizada pela HP.

Para maiores informações, inclusive sobre os pontos de recebimento, acesse:

Não descarte o produto eletronico em
lixo comum www.hp.com.br/reciclar

114 Appendix A Technical information ENWW

The Table of Hazardous Substances/Elements and their Content (China)
产品中有害物质或元素的名称及含量

根据中国《电器电子产品有害物质限制使用管理办法》

有害物质

部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚

(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)

外壳和托盘 ◯ ◯ ◯ ◯ ◯ ◯

电线 ◯ ◯ ◯ ◯ ◯ ◯

印刷电路板 X ◯ ◯ ◯ ◯ ◯

打印系统 X ◯ ◯ ◯ ◯ ◯

显示器 X ◯ ◯ ◯ ◯ ◯

喷墨打印机墨盒 ◯ ◯ ◯ ◯ ◯ ◯

驱动光盘 X ◯ ◯ ◯ ◯ ◯

扫描仪 X ◯ ◯ ◯ ◯ ◯

网络配件 X ◯ ◯ ◯ ◯ ◯

电池板 X ◯ ◯ ◯ ◯ ◯

自动双面打印系统 ◯ ◯ ◯ ◯ ◯ ◯

外部电源 X ◯ ◯ ◯ ◯ ◯

本表格依据 SJ/T 11364 的规定编制。

◯：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。

X：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。

此表中所有名称中含 “X” 的部件均符合中国 RoHS 达标管理目录限用物质应用例外清单的豁免。

此表中所有名称中含 “X” 的部件均符合欧盟 RoHS 立法。

注：环保使用期限的参考标识取决于产品正常工作的温度和湿度等条件。

Restriction of hazardous substance (India)

This product, as well as its related consumables and spares, complies with the reduction in hazardous
substances provisions of the "India E-waste (Management and Handling) Rule 2016." It does not contain lead,
mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in
concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for where allowed pursuant to
the exemptions set in Schedule 2 of the Rule.

Restriction on hazardous substances statement (Turkey)

Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur

ENWW Environmental stewardship program 115

 Declaration of the Presence Condition of the Restricted Substances Marking
(Taiwan)
台灣 限用物質含有情況標示聲明書

Taiwan Declaration of the Presence Condition of the Restricted Substances Marking

限用物質及其化學符號

單元 Restricted substances and their chemical symbols

Unit 鉛 汞 鎘 六價鉻 多溴聯苯 多溴二苯醚

(Pb) (Hg) (Cd) (Cr+6) (PBB) (PBDE)

列印引擎 － ◯ ◯ ◯ ◯ ◯

Print engine

外殼和 紙匣 ◯ ◯ ◯ ◯ ◯ ◯

External casing and trays

電源供應器 － ◯ ◯ ◯ ◯ ◯

Power supply

電線 ◯ ◯ ◯ ◯ ◯ ◯

Cables

印刷電路板 － ◯ ◯ ◯ ◯ ◯

Printed circuit board

控制面板 － ◯ ◯ ◯ ◯ ◯

Control panel

墨水匣 ◯ ◯ ◯ ◯ ◯ ◯

Cartridge

掃描器 組件 － ◯ ◯ ◯ ◯ ◯

Scanner assembly

備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。

Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the
reference percentage value of presence condition.

備考 2.〝◯〞係指該項限用物質之百分比含量未超出百分比含量基準值。

Note 2: “◯” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of
presence.

備考 3.〝－〞係指該項限用物質為排除項目。

Note 3: 〝－〞 indicates that the restricted substance corresponds to the exemption.

若要存取產品的最新使用指南或手冊，請前往 www.support.hp.com。選取搜尋您的產品，然後依照 畫面
上的指示繼續執行。

116 Appendix A Technical information ENWW

 To access the latest user guides or manuals for your product, go to www.support.hp.com. Select Find your
product, and then follow the onscreen instructions.

Battery disposal in Taiwan

European Union Battery Directive

This product contains a battery that is used to maintain data integrity of real time clock or product settings
and is designed to last the life of the product. Any attempt to service or replace this battery should be
performed by a qualified service technician.

Battery notice for Brazil

A bateria deste equipamento nao foi projetada para ser removida pelo cliente.

California Perchlorate Material Notice

Perchlorate material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/perchlorate

This product's real-time clock battery or coin cell battery may contain perchlorate and may require special
handling when recycled or disposed of in California.

California Rechargeable Battery Take-Back Notice

HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable
batteries. For more information about recycling programs, go to www.hp.com/recycle

ENWW Environmental stewardship program 117

118 Appendix A Technical information ENWW
Index

B J recycle
buttons, control panel 4 jams ink cartridges 112
clear 78 regulatory notices 105
C regulatory model identification
cartridge latch, cartridge M number 105
locating 2 multi-feeds, troubleshoot 83 wireless statements 107
cartridges
tips 52 N S
connectors, locating 3 network connection scan
control panel wireless connection 21 from Webscan 68
buttons 4 networks scan specifications 104
features 4 connector illustration 3 skew, troubleshoot
status icons 5 view and print settings 9 print 83
copy software
specifications 104 O scan 65
customer support operating systems supported 103 Webscan 68
warranty 98 specifications
P system requirements 103
E paper status icons 5
embedded web server clear jams 78 system requirements 103
about 35 skewed pages 83
opening 35 troubleshoot feeding 83 T
troubleshoot, cannot be opened paper-feed problems, troubleshoot technical information
36 83 copy specifications 104
Webscan 68 power environmental specifications
environment troubleshoot 92 103
Environmental product power input, locating 3 print specifications 104
stewardship program 110 print scan specifications 104
environmental specifications Print Anywhere 44 trays
103 specifications 104 clear paper jams 78
EWS. See embedded web server troubleshoot 92 locating 2
printer control panel paper-width guides 2
I locating 2 troubleshoot feeding 83
ink door printer software (Windows) troubleshoot
locating 2 about 34 embedded web server 36
input tray opening 33, 34 HP Smart 78
locating 2 multiple pages are picked 83
IP address R paper not picked up from tray
checking for printer 36 rear access 83
illustration 3

ENWW Index 119

 paper-feed problems 83
power 92
print 92
skewed pages 83

V
view
network settings 9

W
warranty 98
Webscan 68
Windows
system requirements 103

120 Index ENWW