Scribd
Upload
686 views

Automobile Engineering

This document contains 26 multiple choice questions about automobile engineering concepts. Specifically, it covers topics like the components and systems of internal combustion engines like the temperature gauge, types of tires, car batteries, camshafts, fuel mixtures, and more. It also includes questions about engine valves, their purpose, operation, and specifications. The purpose of the document is to test knowledge of basic automobile engineering systems and terminology.

Uploaded by

INAMUL HASAN
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
686 views

Automobile Engineering

This document contains 26 multiple choice questions about automobile engineering concepts. Specifically, it covers topics like the components and systems of internal combustion engines like the temperature gauge, types of tires, car batteries, camshafts, fuel mixtures, and more. It also includes questions about engine valves, their purpose, operation, and specifications. The purpose of the document is to test knowledge of basic automobile engineering systems and terminology.

Uploaded by

INAMUL HASAN
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

AUTOMOBILE ENGINEERING

1. The temperature indicating instrument in vehicles indicates the temperature of


(A) Engine piston
(B) Engine cylinder
(C) Lubricating oil
(D) Jacket cooling water

2. Two general types of tyres are


(A) Tube type and tubeless
(B) Solid and tubeless
(C) Air and pneumatic
(D) Split rim and drop centre

3. How many cells are used in a 12 volt car battery?


(A) 2
(B) 4
(C) 6
(D) 8

4. The motion of the cam is transferred to the valves through


(A) Pistons
(B) Rocker arms
(C) Camshaft pulley
(D) Valve stems

5. The power actually developed inside the engine cylinder is called as


(A) Indicated power
(B) Brake power
(C) Frictional power
(D) None of these

6. If the air-fuel mixture in a spark ignition engine is too rich, then air-fuel ratio is about
(A) 17:1
(B) 15:1
(C) 13:1
(D) 10:1

7. Petrol that detonates easily is called


(A) High octane petrol
(B) Low octane petrol
(C) Unleaded petrol
(D) Blended fuel
AUTOMOBILE ENGINEERING

8. The advantage of a tubeless tyre over tube type tyre is


(A) Slow air leakage
(B) Better fuel efficiency
(C) Less chances of running flat
(D) All of these

9. In a single dry plate clutch, torsional vibrations are absorbed by


(A) Coil springs known as torsional springs
(B) Cushion springs
(C) Central hub
(D) Clutch pedal

10. The battery is an electrochemical device, which means battery

(A) Makes chemicals by mechanical means


(B) Uses chemical action to provide electricity
(C) Has curved plates instead of flat plates
(D) Does not use an electrolyte

11. An overinflated tyre will wear the tread most near the
(A) Edges
(B) Corners
(C) Centre
(D) None of these

12. The calorific value of Diesel is about


(A) 36.5 MJ/kg
(B) 38.5 MJ/kg
(C) 42.5 MJ/kg
(D) 45.5 MJ/kg

13. The function of oil control rings is that it


(A) Lubricates the cylinder wall by releasing oil from its hole
(B) Keeps the cylinder wall lubricated by holding oil in its channel
(C) Prevents engine oil from going into the combustion chamber and returns excess lubricating
oil off the cylinder wall through the return holes in the piston to the oil pan
(D) Maintains a seal and prevents escape of burned gases and oil leakage

14. Two advantages of using helical gears rather than spur gears in a transmission system are
AUTOMOBILE ENGINEERING

(A) Strength and cost


(B) Strength and less end thrust
(C) Noise level and strength
(D) Noise level and economy

15. The correct flow of power through the drive train is


https://www.freshersnow.com/previous-year-question-papers/
(A) Engine drive shafts, clutch, main shaft, counter shaft, final driven gear, wheels
(B) Engine clutch, main shaft, counter shaft, final driven gear, drive shafts, wheels
(C) Engine clutch, counter shaft, main shaft, final driven gear, drive shafts, wheels
(D) Engine main shaft, counter shaft, clutch, final driven gear, drive shafts, wheels

16. In a four stroke engine each cylinder has


a) One valve
b) Two valves
c) Three valves
d) Four valves

17. In a diesel engine the fuel injection pressure is in the range


a) 100 to 170 atm
b) 60 to 70 atm
c) 30 to 40 atm
d) 20 to 25 atm

18. The valve is opened as the cam lobe on the cam raises the
a) Bearing
b) Piston
c) Valve lifter
d) Valve seat

19. Exhaust valve temperature is about


a) 35 degree celsius
b) 100 degree celsius
c) 150 degree celsius
d) 500 degree celsius

20. The size of the engine intake valve is


AUTOMOBILE ENGINEERING

a) Same as that of exhaust valve


b) Smaller than that of exhaust valve
c) Larger than that of exhaust valve
d) Does not depend upon the size of exhaust valve

21. The device used to measure the clearance between the valve and tappet of an IC Engine is
a) Feeler gauge
b) Snap gauge
c) Slip gauge
d) Micrometer

22. The purpose of valve clearance is to


a) Allow the valve to expand
b) Allow the sliding of valve in the guide
c) Ensure that the valve closes fully
d) Ensure that the crankshaft is free to rotate

23. The opening and closing of a valve is respectively done by


a) A cam and a spring
b) A spring and a cam
c) Gas pressure and cam
d) Cylinder vacuum and spring

24. On modern four stroke engines the exhaust valve opens just
a) Before TDC
b) After TDC
c) Before BDC
d) After BDC

25 On modern four stroke engines the inlet valve opens just


a) Before TDC
b) After TDC
c) Before BDC
d) After BDC

26. A relief valve is fitted to the main oil gallery of an engine. The purpose of this valve is to
AUTOMOBILE ENGINEERING

a) Limit the maximum oil pressure


b) Open when the oil is hot
c) Maintain the supply if the gallery becomes blocked
d) Stop the oil flow to the bearings

You might also like