TM 9-1005-212-25

DEPARTMENT OF THE ARMY TECHNICAL MANUAL

ORGANIZATIONAL, DS, GS AND DEPOT MAINTENANCE

MANUAL INCLUDING REPAIR PARTS AND
SPECIAL TOOLS LIST

MACHINE GUN, CALIBER .30: BROWNING, M1919A4

FLEXIBLE W/E (1005-672-1643)
MACHINE GUN, CALIBER .30: BROWNING,
M1919A6 W/E (1005-611-6005)
MACHINE GUN, CALIBER .30: M37
(1005-716-2946)
MOUNT, TRIPOD, MACHINE GUN: CALIBER .30, M2, W/E
(1005-322-9718)

HEADQUARTERS, DEPARTMENT OF THE ARMY

JUNE 1969
 This document created by James Jones (Teps71)
and proof read by John DePasquale (JD45)

I would like to thank the 1919A4.com community for the

wealth of information they have available for all to see.
Please take a moment to visit them at the following url:

http://www.1919A4.com

It is in this sharing spirit that I have converted this technical

manual into a more legible electronic format.

I would also like to thank Todd Grove at Rapid Fire in Troy, Ohio for
sparking my interest in the 1919 series of guns. Todd creates a
truly excellent product in his semi-auto 1919A4 and is a wealth
of information on the subject of 1919A4’s in general. Please visit
Rapid Fire’s home page at the following url, or better yet visit his store:

http://www.ohiorapidfire.com

This version of TM 9-1005-212-25 may

not be sold or disseminated for charge
by any means, electronic, print or otherwise.

James Jones
 TM 9-1005-212-25

ORGANIZATIONAL, DS, GS AND DEPOT MAINTENANCE MANUAL

INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

MACHINE GUN, CALIBER .30: BROWNING,

M1919A4, FLEXIBLE W/E
(1005-672-1643)
MACHINE GUN, CALIBER .30: BROWNING,
M1919A6 W/E
(1005-611-6005)
MACHINE GUN, CALIBER .30: M37
(1005-716-2946)
MOUNT, TRIPOD, MACHINE GUN:
CALIBER .30, M2, W/E
(1005-322-9718)

This manual is current as of 28 May 1969

Paragraphs Pages
Chapter 1. INTRODUCTION
Section I. General .................................................................................................... 1-1, 1-3 3
II. Description and data 1-4, 1-5 3
Chapter 2. ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section I. Service upon receipt of material................................................................... 2-1 5
II. Repair parts special tools and equipment ...................................................... 2-2. 2-4 5
III. Lubrication ............................................................................................... 2-4 5
IV. Preventative maintenance checks and services............................................... 2-5 5
V. Troubleshooting......................................................................................... 2-6 6
VI. Organizational maintenance procedures ........................................................ 2-7, 2-10 8
Chapter 3. DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE INSTRUCTIONS
Section I. Repair parts, special tools and equipment ..................................................... 3-1, 3-2 11
II. Troubleshooting......................................................................................... 3-3 11
III. Pre-embarkation inspection of material in units alerted for overseas movement .. 3-4, 3-5 12
IV. General maintenance ................................................................................. 3-6, 3-7 12
V. Repair instruction for machine guns.............................................................. 3-8, 3-10 13-18
VI. Repair instructions for Tripod Mount, M2 ....................................................... 3-11 24
VII. Depot maintenance instruction .................................................................... 3-12 26
Chapter 4. FINAL INSPECTION .................................................................................... 4-1, 4-3 27
5. DESTRUCTION OF MATERIEL TO PREVENT ENEMY USE.................................... 5-1 31
Appendix A. REFERENCES ............................................................................................ A-1
B. COMBINED ORGANIZATIONAL DIRECT SUPPORT, GENERAL
SUPPORT, AND DEPOT MAINTENANCE REPAIR PARTS AND
SPECIAL TOOLS LIST
Section I. Introduction.............................................................................................. B-1, B-7 33-36
II. Prescribed load allowance .........................................................................................................37

This manual supersedes TM 9-1005-212-12P, 22 July 1964, including changes, TM 0-1005-212-35, 7 September 1965,
including changes and TM 9-1005-241-35, 25 October 1965, including changes

1
TM 9-1005-212-25

Paragraphs Pages

Section III. Organizational repair parts for:

Major group and assemblies (M1919A4 and M1919A6 only) (Fig. B-1) ..........................................39
Major group and assemblies (M37 only) (Fig. B-2) .....................................................................39
Bolt group (M1919A4 and M1919A6 only) (Fig. B-6)...................................................................40
Driving spring assembly and bolt group (M37 only) (Fig. B-7)......................................................40
Lock frame group (Fig. B-8) ...................................................................................................41
Barrel extension group (Fig. B-9) ............................................................................................41
Cover group (M1919A4 and M1919A6 only) (Fig. B-10) ..............................................................41
Cover group (M37 only) (Fig. B-11) .........................................................................................42
Casing and barrel jacket group (M1919A4 and M1919A6) (Fig B-14) ............................................43
Casing and barrel jacket group (m37 only) (Fig B-15 .................................................................43
Major groups and assemblies traversing and elevating mechanism assembly (Fig. B-18) .................44
Head and leg groups (Fig. B-19) .............................................................................................44
VI. Special tools and equipment for:
Machine guns, M1919A4, M1919A6 and M37 .............................................................................45
Tripod Mount, M2..................................................................................................................46
Amorers tools (Fig. B-24).......................................................................................................46
Section I. Direct support, general support and depot maintenance repair parts for:
Major groups and assemblies (M1919A4 and M1919A6) (Fig. B-1) ...............................................47
Major groups and assemblies (M37) (Fig. B-2) ..........................................................................48
Shoulder gun stock group (Fig. B-3) ........................................................................................48
Back plate assembly (M1919A4 and M1919A6 only) (Fig. B-4).....................................................48
Back plate assembly (M37 only) (Fig. B-5)................................................................................49
Bolt group (M1919A4 and M1919A6 only) (Fig. B-6)...................................................................50
Driving spring assembly and bolt group (M37 only) (Fig. B-7)......................................................51
Lock frame group (Fig. B-8) ...................................................................................................53
Barrel extension group (Fig. B-9) ............................................................................................54
Cover group (M1919A4 and M1919A6 only) (Fig. B-10) ..............................................................54
Cover group (M37 only) (Fig. B-11) .........................................................................................55
Bipod assembly (Fig. B-12) ....................................................................................................56
Carry handle assembly (Fig. B-13) ..........................................................................................56
Casing and barrel jacket group (M1919A4 and M1919A6 only) (Fig. B-14).....................................57
Casing and barrel jacket group (M37 only) (Fig. B-15)................................................................59
Front sight group (Fig. B-16) ..................................................................................................62
Retracting bar group (M37 Only) (Fig. B-17) .............................................................................63
Traversing and elevating mechanism assembly (Fig. B-18)..........................................................63
Head and leg groups (Fig. B-19) .............................................................................................66
Section VI. Special tools, test and support equipment
Tools and equipment authorized for unit replacement (M1919A4, M1919A6
and M37) (Fig. B24) ..............................................................................................................69
Tripod Mount, M2 (Fig. B-22)..................................................................................................70
Special tools and equipment (Figs. B-21 thru B-29) ...................................................................70
VII. Index – Federal stock numbers and reference number cross – referenced
To figure and item number .....................................................................................................91
Appendix C. MAINTENANCE ALLOCATIN CHART
Introduction .........................................................................................................................97
II. Maintenance allocations chart for Machine Guns Caliber .30, M1919A4
M1919A6 and M37 and Machine Gun Tripod Mount, M2 ..............................................................98

2
 TM 9-1005-212-25

CHAPTER 1

INTRODUCTION

Section I. GENERAL

1-1. Scope individual user is encouraged. Reports should be

This manual contains instructions for organizational, submitted on DA Form 2028 (Recommended Changes
direct support, general support and depot to DA Publications) and forwarded direct to:
maintenance. They apply to the Caliber .30 Machine
Guns, M1919A4, M1919A6 and M37 (with and without Commanding General
sights); and Machine Gun Tripod Mount, M2. Headquarters
U.S. Army Weapons Command
1-2. Forms and Records ATTN: AMSWE-SMM-P
a. General. DA Forms and procedures used for Rock Island, Illinois 61201
equipment maintenance will be only those prescribed
in TM 38-750, Army Equipment Record Procedures. 1-3. Administrative Storage
b. Recommendations for equipment Publications
Improvements. Report of errors, omissions, and Requirements for administrative storage of this
recommendations for improving this publication by the equipment are contained in TM 740-90-1.

Section II. Description and Data

1-4. Description

a. Caliber .30 Machine Guns, M1919A4 and a. Caliber .30 Machine Guns, M1919A4 and
M1919A6. For the description and over-all views of the M1919A6. For tabulated data on the machine guns
machine guns refer to TM 9-1005-212-10. refer to TM 9-1005-212-10.
b. Caliber .30 Machine Gun, M37 (with and b. Caliber .30 machine Gun, M37.
without sights). The machine gun (figure 1-1) is an Weight....................................... 31 lbs approx
automatic and air-cooled weapon. It is designed Length of weapon ........................ 41 ¾ in
mainly for secondary armament on combat vehicles Length of barrel .......................... 24 in
(fixed application without sights); or as a tripod Feed .......................................... metallic link belt
mounted ground machine gun (flexible application with Rate of Fire ................................400 to 550 rds per
sights) by the Marine corps. min
c. Machine Gun Tripod Mount, M2. For the Type of operation ........................ recoil
description and over-all view of the mount refer to TM 9- Trigger Pull:
1005-212-210. Maximum ................................... 12 lbs
Minimum.................................... 7 lbs
1-5. Tabulated Data c. Machine Gun Tripod Mount, M2. For tabulated
data on the mount refer to Tom 9-1005-212-10

3
TM 9-1005-212-25

A – RIGHT REAR VIEW WITH SIGHTS

B – LEFT FRONT VIEW W/O SIGHTS

Figure 1-1. Caliber .30 Machine Gun, M37.

4
 TM 9-1005-212-25

CHAPTER 2

ORGANIZATIONAL MAINTENANCE INSTRUCTION

Section I. SERVICE UPON RECEIPT OF MATERIEL

2-1. General

The procedures contained in table 2-1 will be ceiving new or rebuilt weapons and mounts before
observed by organizational maintenance when re- issuance to using troops.

Table 2-1. Service Upon Receipt of Materiel

Step Action Reference 5 Clean and lubricate if TM 9-1005-212-10 or

1 Remove machine gun or necessary pertinent vehicle
tripod mount, and items operator’s manual
from containers 6 Re-assembly
2 Check for missing items. TM 9-1005-210-10 Note. Install spare barrel
Note. Items must agree with assembly to make certain it
Basic Issue Items List. locks securely.
3 Remove VCI tube from barrels 7 Adjust Headspace. TM 9-1005-212-10 or
4 Field strip machine gun and TM 9-1005-212-10 or pertinent vehicle
inspect for: pertinent vehicle operator’s manual
Missing Parts operator’s manual 8 Function, using dummy
Proper assembly cartridges

Section II. REPAIR PARTS, SPECIAL TOOLS AND EQUIPMENT

2-2. Special Tools and Equipment armament. Spare parts box 7148550 is issued only
with the Machine Gun, M37.
Refer to appendix B, section IV, for special tools
and equipment that are required by organizational 2-3 Maintenance Repair Parts
maintenance to maintain the machine gun mount.
Note. Spare parts box 7148549 is issued only when Organizational repair parts are listed and
the Machine Gun, M1919A4 is used as vehicle illustrated in appendix B, section III.

Section III. Lubrication

2-4. General Mount, M2 and pertinent vehicle operator’s manual for

lubrication of Machine Gun, M37.
Refer to TM 9-1005-212-10 for lubrication of
Machine Guns, M1919A4 and M1919A6 and Tripod

Section IV. PREVENTATIVE MAINTENANCE CHECKS AND SERVICES

2-5. General
Refer to table 2-2 for preventative maintenance
check and services to be performed by organizational
maintenance.

5
TM 9-1005-212-25
Table 2-2. Preventative Maintenance Checks and Service

Organizational maintenance Category Monthly Schedule (or quarterly)

Sequence Item to be inspected Procedure Reference

Number
Note. During periods of inactivity perform preventative
maintenance every 90 days unless inspection reveals more
frequent servicing is necessary.
General condition
Inspect protective coatings for effectiveness. Check for TM 9-1005-212-10 or pertinent
missing, loose, or damaged parts, tools or equipment. vehicle operator’s manual
Check to insure compliance with cleaning and lubrication
instruction.

Section V. TROUBLESHOOTING

2-6. General are listed in TM 9-1005-212-10 or pertinent vehicle

operator’s manual.
a. Refer to table 2-3 for information in diagnosing and
correcting unsatisfactory operation or failure of the
machine gun and mount. Each malfunction state is
followed by a list of probable causes. The corrective
action recommended is described opposite the
probable cause.

b. Malfunctions which may occur for operator and crew

Table 2-3. Organizational Troubleshooting

Malfunction Probable cause Corrective action

Machine Gun Note. For malfunctions encountered but
not listed, or if corrective action does
not remedy condition, notify direct
support maintenance.
1. Failure to feed a. Defective belt feed lever a. Replace
b. Defective extractor assembly b. Replace
c. Defective belt feed pawl spring c. Replace
d. Defective bell feed pawl d. Replace
e. Defective belt feed slide e. Replace
f. Defective belt holding pawl f. Replace
g. Defective belt holding pawl spring g. Replace
h. Defective cover latch spring h. Replace
i. Defective belt feed lever pin i. Replace
j. Defective extractor plunger or spring j. Evacuate to direct support
maintenance
k. Defective extractor cam k. Evacuate to direct support
maintenance
l. Defective cover latch l. Evacuate to direct support
maintenance
m. Defective feed pawl m. Replace
2. Failure to chamber a. Defective T-slot a. Replace bolt
b. Defective recoil plate b. Replace bolt
c. Defective extractor feed cam c. Evacuate to direct support
maintenance
3. Failure to lock a. Defective breech lock a. Evacuate to direct support
maintenance
b. Defective breech lock cam b. Evacuate to direct support
maintenance
c. Defective accelerator c. Evacuate to direct support
maintenance
d. Defective T-lug stud d. Evacuate to direct support
maintenance

6
 TM 9-1005-212-25

Table 2-3. Organizational Troubleshooting – Continued

Malfunction Probable cause Corrective action

4. Failure to fire a. Defective firing pin a. Replace
b. Defective trigger b. Replace
c. Sear spring weak or broken c. Replace
d. Faulty engagement of firing pin and d. Replace
sear notch e. Evacuate to direct support
e. Defective firing pin spring maintenance
f. Evacuate to direct support
f. Improper timing maintenance
g. Defective breech lock g. Evacuate to direct support
maintenance
5. Failure to unlock a. Defective breech lock a. Evacuate to direct support
maintenance
b. Faulty breech lock cam clearance b. Evacuate to direct support
maintenance
6. Failure to extract a. Defective T-slot a. Replace breech bolt
b. Defective extractor b. Replace
7. Failure to eject a. Defective firing pin a. Replace
b. Defective ejector b. Evacuate to direct support
maintenance
c. Defective ejector spring c. Evacuate to direct support
maintenance
8. Failure to cock a. Defective cocking lever a. Replace
b. Defective firing pin sear notch b. Replace
c. Defective cocking lever pin c. Replace
d. Defective sear d. Replace
e. Defective sear spring e. Replace
9. Uncontrolled a. Defective sear a. Replace
automatic fire b. Defective trigger b. Replace
c. Defective firing pin c. Replace
10. Failure to load a. Defective belt holding pawl or spring a. Replace
b. Defective feed pawl or spring b. Replace
c. Defective belt feeder lever. c. Replace
11. Ruptured primers Elongated firing pin hole Replace breech bolt
12. Sluggish operation a. Improper timing a. Evacuate to direct support
maintenance
b. Burred parts b. Remove burs

Tripod

1. Failure to traverse a. Defective traversing hand wheel a. Evacuate to direct support

b. Defective traversing and elevating maintenance
mechanism assembly b. Evacuate to direct support
maintenance
2. machine gun not a. Defective quick release pin a. Evacuate to direct support
secured to mount maintenance
b. Defective pintle lock b. Evacuate to direct support
maintenance
c. Defective traversing and elevating c. Evacuate to direct support
mechanism assembly maintenance
d. Defective tripod mount pintle d. Evacuate to direct support
maintenance
3.Legs fail to stay open a. Defective sleeve latch a. Evacuate to direct support
or locked maintenance
b. Defective sleeve lock spring b. Evacuate to direct support
maintenance

7
TM 9-1005-212-25
Section VI. ORGANIZATIONAL MAINTENANCE PROCEDURES

2-7. General of socket wrench 6147277 to remove barrel bearing

from Machine Guns, M1919A6 and M37.
Inspect components for rust, corrosion, burs,
scored areas or foreign matter and remove. Inspect 2-10. Cleaning, Inspection and Repair
springs for deformation and replace if necessary.
Inspect: for damage to threads of screws, bolts, and a. Cleaning.
other components. Inspect for appearance, proper
assembly and functioning. Repair or replace Note. During periods of inactivity, clean and lubricate every
unserviceable parts as authorized. 90 days unless inspection reveals more frequent servicing is
necessary.

Note. Maintenance of some groups and assemblies are (1) Refer to Tm 9-1005-212-10 for a list of cleaning
not authorized by the maintenance allocation chart (app C) to
materials used in conjunction but not issued with this
organizational maintenance. Insure that no work is being
accomplished beyond the scope authorized to organizational equipment.
maintenance. Evacuate to direct and general support
maintenance for repairs when necessary. (2) For specific cleaning instructions on machine Guns,
M1919A4 and M1919A6, and Tripod Mount, M2, refer
2-8. Removal/Installation of Major Groups and to TM 9-1005-212-10
Assemblies
(3) Refer to the pertinent vehicle operator’s manual for
Refer to TM 9-1005-212-10 for procedures on instructions on cleaning Machine Gun, M37
removal and installation of major groups and
assemblies of Caliber .30 Machine Guns, M1919A4 and (4) On component parts which contain a hard carbon
M1919A6 and Tripod Mount, M2. Instructions for residue it may be necessary to clean
Caliber .30 Machine Gun, M37 are contained in the
pertinent vehicle operator’s manuals.

2-9. Disassembly/Assembly of Major Groups and

Assemblies

Disassemble/assemble in accordance with

illustrations in appendix B. Refer to figure 2-1 for use

Figure 2-1. Use of socket wrench

8
 TM 9-1005-212-25

Those parts with carbon removing compound 6856- with running water if it comes in contact with the
965-2332 (P-C-111). Depending on the amount of skin. A good lanolin base cream, after exposure
carbon residue, soak for 2 to 16 hours, rinse with to compound, is helpful. The use of rubber gloves
water and dry cleaning solvent (SD), brush with a stiff and protective equipment is recommended.
bristle brush, wipe the parts dry and lubricate.
b. Inspection and Repair. Refer to table 2-4.
Warning. Avoid skin contact with P-C-111.
The compound should be washed off thoroughly

Table 2-4. Organizational Maintenance Procedures

Group or assembly Inspection Repair Reference

Warning. Before starting an
inspection, be sure to clear
the weapon. Do not actuate
the trigger until the weapon
has been cleared. Inspect
the chamber to insure that it
is empty, and check to see
that no ammunition is in
position to be introduced.
Machine Gun Replace items 2, 3, 7, 8, 9, 17, 20
and 23, Fig. B-1 and items 1, 2,
3, 4, 8 and 9, fig B-5 if necessary.
Shoulder gun stock group Inspect to assure stock is secure.
(M1919A6 only) Nut on clamp must turn freely.
Check clamp and wing nut for
damaged threads. Inspect stock
body for cracks.
Back plate assembly Adjusting screw must be tight, not Replace, if necessary. Evacuate to 2, fig. B-1
below flush, or protruding more direct support maintenance for 1, fig. B-3
than 1 ½ threads, slot either repair
vertical or horizontal. Headless
shoulder pin must be seated in
its recess when adjusting screw
is tight. Back plate assembly
must be capable of being
latched securely and must be
free enough to be removed by
hand.
Check trigger safety (M37 only) for
proper function
Bolt group (M1919A4 and The ejector should return to neutral Replace items 1,7 thru 11, 15, 17
M1919A6 only) and position when pulled to the side and 18, fig. B-6 and items 5, 14
Driving spring assembly and released. Firing pin point thru 17, 21, 22, and 23, fig. B-7,
and bolt group (M37 only) should be smooth and well if necessary
rounded. Firing pin should
move freely in the bolt group.
Sear should work smoothly in
the guideways without binding.
The angle on mating surfaces
that engages the firing pin will
be sharp without a feather
edge. Driving spring for
M1919A4 and M1919A6 must
have a free length of 15 ¼ to
16 ¼ inches
Lock frame group Headless shoulder pin (lock frame Replace items 1 and 3 thru 7, fig. B-
pin) must move freely under 8, if necessary.
spring tension. Trigger cams
must be free of distortion
Barrel extension group Breech lock will function freely with Replace items 1 and 3, fig. B-9, if
a minimum of looseness in its necessary
slot and forward beveled edges
will be free from damage.
Barrel locking spring must
prevent rotation of the
barrel/barrel assembly during
firing of the weapon.
Barrel/barrel assemblies Inspect for pits large enough to Replace, if necessary 7 and 8, Fig. B-1 and 8,
cause extraction difficulties. Fig. B-
Pits must not

9
TM 9-1005-212-25

Group or assembly Inspection Repair Reference

be greater than the width of a
land or grove or more than 3/8
inch in length.
Cover group (M1919A4 and Cover will be held open by function Replace items 1 thru 5 and 7 thru
M1919A6) of cover catch assembly. The 12, Fig. B-10, if necessary
cover will operate freely in its
travel. Functional components
will operate freely. Cover latch
will hold cover and back plate
assembly securely.
Cover group (M37 only) Cover will be held open by function Replace items 1 thru 8 and 10 thru
of cover detent panel. The 13, fig. B-11, if necessary
cover will operate freely in its
travel. Functional components
must operate freely. Cover
latch will hold cover and back
plate assembly securely
Flash hider group (M1919A4 Check flash hider for carbon and Evacuate to direct support 18 and 19, fig. B-1
and M1919A6 only) for binding when assembled to maintenance for necessary repair
front barrel bearing. Check clip
assembly for looseness and set.
Bipod assembly (M1919A6 Check for damaged threads and for Evacuate to direct support 21, fig. B-1
only) missing or damaged maintenance for necessary repair
components. Thumb screws
must secure legs firmly.
Carrying handle assembly Inspect for cracked or splintered Replace if necessary. After 23, fig. B-1
(M1919A4 and M1919A6 handle and damaged threads. assembling to machine gun, stake
only) Body must be secure to barrel screw MS 90825-6 (3, fig. B-13)
jacket when tight. slightly over nut. Evacuate to
direct support maintenance for
necessary repair.
Casing and barrel jacket group Elevation and windage screws must Replace items 12, 20, 22, 23, and
function freely. Front sight 24, fig. B-14 and items 12, 17,
must be in alignment. Blade 18, 19 ,21, 26, and 29 fig. B-15 if
must be securely fastened in necessary
place. Barrel jacket must not
cause binding of barrel/barrel
assembly in front barrel
bearing. Barrel jacket must be
held securely to casing by
machine screw.

Tripod Mount

Traversing and elevating Check to assure mechanism Replace items 2,3, and 6, fig. B-18,
mechanism assembly traverses and elevates properly if necessary
Head and leg groups Check to assure head and leg Replace items 1,2, and 3, fig. B-19,
groups can be secured. if necessary

10
 TM 9-1005-212-25
CHAPTER 3

DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT

MAINTENANCE INSTRUCTIONS

Section I. REPAIR PARTS, SPECIAL TOOLS AND EQUIPMENT

3-1. Special Tools and Equipment 3-2. Repair Parts

Special tools and equipment required by Direct support, general support and depot
maintenance to perform the repair operations maintenance repair parts are listed and illustrated in
described in this manual are listed and illustrated in appendix B.
Appendix B.

Section II. TROUBLESHOOTING

3-3. General maintenance.

b. Refer to table 2-3 for organizational trouble
a. Refer to table 3-1 for troubleshooting shooting procedures.
procedures for direct support and general support

Table 3-1. Direct and General Support Troubleshooting

Malfunction Probable cause Corrective action

Machine gun
1. Failure to feed a. Defective extractor cam a. Replace
b. Defective extractor plunger or spring b. Replace
c. Defective cover latch c. Replace
2. Failure to chamber Defective extractor feed cam Replace
3. Failure to lock a. Defective breech lock a. Replace
b. Defective breech lock cam b. Replace
c. Defective accelerator c. Replace
d. Defective T-lug stud d. Replace barrel extension
e. Defective driving spring assembly e. Replace
4. Failure to fire a. Defective firing pin spring or firing pin a. Replace
b. Faulty breech lock cam clearance b. Adjust timing
c. Defective barrel extension c. Replace
5. Failure to unlock a. Defective breech lock a. Replace
b. Faulty breech lock cam clearance b. Adjust
6. Failure to eject a. Defective ejector a. Replace
b. Defective ejector spring b. Replace
c. Deformed T-slot c. Replace barrel extension
7. Sluggish operation Improper timing Time correctly

Tripod Mount

1. Failure to traverse Defective traversing and elevating Repair or replace

mechanism assembly
2. Machine gun not secured to mount a. Defective quick release pin a. Repair or replace
b. Defective pintle lock b. Repair or replace
c. Defective traversing and elevating c. Repair or replace
mechanism assembly
d. Defective tripod mount pintle d. Replace
3. Legs fail to stay open or locked a. Defective sleeve latch a. Repair or replace
b. Defective sleeve lock spring b. Replace

11
TM 9-1005-212-25
Section III. PREEMBARKATION INSPECTION OF MATERIEL IN UNITS

ALERTED FOR OVERSEAS MOVEMENT

3-4. General Bolt group Recoil plate will be flush

with face of bolt and
This section provides specific instructions for firmly seated.
guidance during inspection by direct and general Firing pin hole Maximum 0.081 inch (Use
support personnel of materiel in alerted units gauge 5077203).
scheduled for oversea duty. Inspection is made for the Elongation of hole is also
purpose of: a cause for rejection
Firing pin Minimum 0.069 inch
a. Determining serviceability. Bottom plate group Breech lock cam will float
b. Recognizing conditions that would cause slightly.
failure. Back plate Buffer plate must have a
c. Assuring proper maintenance at prescribed 3/16th inch projection
levels. Adjusting screw will be
d. Determining the ability of a unit to accomplish flush or not protrude
its maintenance and supply mission. more than 1 ½ threads
beyond end of buffer
3-5. Inspection Procedure tube. Slot either vertical
or horizontal.
Warning. Before starting an inspection, be Trigger pull Minimum 7 pounds
sure to clear the weapon. DO NOT actuate the Maximum 12 pounds (Use
trigger until the weapon has been cleared. gage 7319928.)
Inspect the chamber to insure that it is empty, Timing Minimum 0.030 inches
and check to see that no ammunition is in Maximum 0.120 inch (Use
position to be introduced. gage 7319928.)
Mount
a. Exercise judgment regarding degree of Leg and head group The distance between
inspection of integral parts within assemblies. sleeve and collar is not to
b. Refer to TB9-100-247-35 and table 3-2 for be less than ¼ or more
inspection criteria. than ½ inch before
locking
Table 3-2. Preembarkation Inspection Clearance between pintle Minimum clearance is
shoulder and tripod head 0.003 inch.
Item Inspection criteria Elevating and traversing Indicators on hand wheel
Machine gun mechanism assembly and elevating scale plate
Breech bore unlined Preembarkation – of upper elevating screw
barrels Maximum 0.304 inch must coincide at “0”
(use gage 5564343.) reading.
Barrel erosion for lined Use barrel erosion kit
barrels 5910297. Refer to TM 9-
4933-208-34.

Section IV. GENERAL MAINTENANCE

3-6. General figures B-1, B2, B-18, B-19, TM 9-1005-212-10 and

pertinent vehicle operator’s manual.) Groups and
This section provides instructions on general assemblies may be disassembled, as necessary, into
maintenance procedures to be used by direct and individual parts.
general support maintenance in maintaining the (2) Complete disassembly of a unit is not always
machine gun and mount. necessary in order to make a required replacement or
repair. Good judgment should be exercised to keep
3-7. General Maintenance Repair Methods disassembly and assembly operations at a minimum.
(3) During assembly, assemblies and groups
a. Disassembly and Assembly Procedures. should be assembled first, then installed
(1) In disassembling the machine gun or mount,
remove the major groups and assemblies (Refer to

12
 TM 9-1005-212-25
to form a complete unit. Lubricate sliding surfaces (3) All springs will be replaced if they are broken,
before assembly. kinked, deformed, fail to function properly, or fail to
b. Replacement of Parts. meet specifications.
(1) Parts will be replaced when unserviceable. (4) If a new part is not available, a reconditioned
(2) When assembling a unit, replace pins and part may be substituted. Such reconditioned parts
cotter pins if available. If screws, nuts, washers, and should be examined carefully to determine their
retainers are damaged they will be replaced. serviceability.

Section V. REPAIR INSTRUCTIONS FOR MACHINE GUNS

3-8. Specific Repair Instructions

For specific repair instructions of the machine gun refer to table 3-3.

13
 Table 3-3. Direct and General Support Maintenance Procedures For Machine Gun

14
Group or assembly Disassembly/assembly Inspection Repair Tests and adjustments

Warning. Before starting

an inspection, be sure to
clear the weapon. Do not
actuate the trigger before
TM 9-1005-212-25

the weapon has been

cleared. Inspect the bore
and chamber to insure that
it is empty and free from
obstructions. Check to see
that no ammunition is in
position to be introduced.

Machine gun Figs B-1 and B-2 Visually inspect machine gun Refinish components as Check timing; use gage 7319928.
for general appearance. necessary. Repair or replace Refer to figures 3-1 and 3-2.
unserviceable components. Check trigger pull, maximum 12
lb, minimum 7 lbs. Use fixture
7271758

Shoulder gun stock Fig B-3 Check clamp and wing nut for Replace items 1 and 2, figure
group (M1919A6 only) damaged threads. Check B-3, if necessary.
clamping groups for locking
action. Inspect stock body for
cracks.

Back plate assembly Figs B-4 and B-6 Adjusting screw must be tight. Replace items 1 thru 8, figure Adjusting screw must not be below
Back plate assembly should fit Headless shoulder pin will be B-4 and items 1 thru 15 flush, or protruding more than 1 ½
firmly in the casing and barrel seated in its recess when except 9 and 10, figure B-5, if threads, slot either vertical or
jacket group, but should be free adjusting screw is tight. necessary horizontal
enough to be removed by hand. Buffer disks will be free from Adjusting screw must be tightened to
burs and tears and edges must 22-26 ft lbs. Torque.
be smooth Buffer plate must have a 3/16 inch
Back plate assembly should fit projection
firmly in the receiver but must
be free enough to be removed
by hand.

Bolt group (M1919A4 Figs B-6 and B-7 All components should be free Replace items 1 thru 48 Check firing pin protrusions;
and M1919A6) and of sharp corners. The ejector except 6, 14, and 16, figure minimum 0.060 inch to maximum
driving spring assembly should return to neutral B-6 and items 1 thru 23 0.068 inch. Use gage 7319929
and bolt group (M37 position when pulled to the except 12 and 20, figure B-7, (figures 3-3 and 3-4).
only) rear and released. Firing pin if necessary. Pin (2, fig B-6) Check firing pin hole; maximum
point should be smooth and must be staked at both ends. 0.081 inch. Use gage 5077293
well rounded. (figures 3-5 and 3-6).
 Table 3-3. Direct and General Support Maintenance Procedures For Machine Gun-Continued

Group or assembly Disassembly/assemb Inspection Repair Tests and adjustments

l
Bolt group – Driving spring of M1919A4 and
continued M1919A6 must have free
length of 15 ¼ to 16 ¼ inches.
Driving spring for M37 must
have free length of 12 ½ to 13
½ inches.
Firing pin should move freely in the bolt
group. Sear should work smoothly in the
guideway without binding. The angle on
mating surfaces that engages the firing pin
will be sharp without a feather edge.
Check the driving spring assembly for
deformation and proper functioning.

Lock frame group Fig B-3 Check to assure there is no binding Replace items 1 thru 8,
between accelerator and depressors. figure B-8, if necessary
Accelerator lugs are to be free of
deformation affecting functional parts.
Lock frame depressors are to work freely
in the barrel extension, the guide pin on
barrel extension plunger will be free from
damage and/or distortion. The lock frame
guides will be tight and free of damage.
Headless shoulder pin (lock frame pin) will
move freely under spring tension. The
trigger cams will be free of distortion or
burs.

Barrel extension Fig B-9 Barrel extension will be free of sharp Replace items 1 thru 4, figure
group edges and burs. Breech lock will function B-9, if necessary.
freely with a minimum of looseness in its
slot, and forward beveled edges will be
free from damage. Barrel locking spring
must prevent rotation of the barrel/barrel
assembly during firing of the weapon.

Barrel/barrel 7 and 8, fig B1-, Barrel/barrel assemblies will pass a visual Replace items 7 and 8, Para 3-9
assemblies and 8, Fig B-2 inspection. They must be clean and free of figure B-1, and item 8,
corrosion. For standards of serviceability, Figure B-2, if necessary
refer to paragraph 3-9.
TM 9-1005-212-25

15
 Table 3-3. Direct and General Support Maintenance Procedures For Machine Gun-Continued

16
Group or assembly Disassembly/assembly Inspection Repair Tests and adjustments

Cover assembly Fig B-10 and B-11 Cover assembly will be held Replace items 1 thru 13, figure B-10
open by function of cover catch and items 1 thru 19 except 16 and 18,
assembly, on M1919A4 and figure B-11, if necessary
TM 9-1005-212-25

M1919A6 and by cover detent on

M37. The cover assembly will
operate freely when opening and
closing. Functional components
will operate freely. Cover latch
will hold cover assembly and
back plate assembly securely.

Flash hider group 18 and 19, fig B-1 Check flash hider for carbon and Replace items 16 thru 20, figure B-1,
(M1919A4 and for binding when assembled to if necessary
M1919A6 only) front barrel bearing. Check clip
assembly for looseness or set.

Refer to figure 3-7 for procedures for

removing hard carbon residue with
carbon removing reamer assembly.

Bipod assembly Fig B-12 Check for bent or stripped screw Replace items 1 thru 9, figure B-12, if
(M1919A6 only) threads and stripped screw needed. Screw (7, fig B-12) must be
holes. Check legs for damaged staked heavily.
or missing components. Thumb
screws must secure legs firmly.

Carrying handle Fig B-13 Check for damaged or missing Replace items 1 thru 6, figure B-13, if
assembly (M1919A4 parts. Inspect handle for cracks necessary
and M1919A6 only) or splintering.

Casing and barrel Figs B-14, B-15, B-16 Inspect in accordance with Replace items 1 thru 9, 12, 15 thru
jacket group and B-17 standards in paragraph 3-10 24, and 30 thru 32, figure B-14, if
necessary. Replacement of items 15
and 16 is restricted to general
support maintenance.

Replace items 1 thru 9, 12, 14 thru

26, 28 thru 32 and 34 thru 36, fig B-
15 if necessary. Replacement of item
28 is restricted to general support
maintenance. For repair of front sight
group replace items 1 thru 11 except
8, figure B-16
 Table 3-3. Direct and General Support Maintenance Procedures For Machine Gun-Continued

Group or assembly Disassembly/asse Inspection Repair Tests and adjustments

Casing and barrel as necessary. For repair of retracting

jacket group – bar group replace items 1 thru 8,
continued figure B-17 as necessary.

Body (11, fig B-16) must be staked

into screw (12, fig B-14 and 12, fig
B-15) and screw (1, fig B-16).

Shoulder bolt (1 fig B-16) will be

staked lightly in two places, 180
degrees apart.

Barrel bearing lock (17, fig B-1 and

25, fig B-15) will be staked into the
notches of the barrel jacket and
barrel bearing. Choose notch which
eliminates possibility of slot and
bearing hole being adjacent.

Barrel jacket must be staked into

slot of screw (14, fig B-14 and 27,
fig B-15) in two places

Screw (18, fig B-14 and 23, fig B-

15) must be drawn up tight, backed
off 1/6 to ¼ turn, and staked in two
places on breech lock cam (19, fig
B-14 and 24, fig B-14)

Stop, short round, front cartridge

(32, fig B-14) must be staked into
slots of stop, short round (20, fig B-
14) in two places

Rivet (30, fig B-14 and 34, fig B-15)

must be ground flush inside and
outside.
TM 9-1005-212-25

17
TM 9-1005-212-25
of chrome plated trunnion blocks with evidence of
3-9. Serviceability Standards for Barrels/Barrel chipped plate in areas that may affect feeding of the
Assemblies. weapon will be governed by criteria indicated in figure
3-12 and 3-13. Chrome flaking caused by feathered
Barrels and barrel assemblies will pass a visual edges will NOT make weapon unserviceable. Chrome
inspection utilizing a gun barrel reflector (figure 3-8). plated trunnion blocks are easily identified by the
They must be clean and free of corrosion. The aluminum color appearance of the top rear flat surface.
following standards of serviceability are applicable: (2) The side plate assembly will be straight and
a. Pits in the chamber ARE allowable if they are will have no sharp corners. Bolt handle will not bind
not large enough to cause extraction difficulties against any portion of the slot in the side plate.
b. Pits greater than the width of a land or groove (3) Top plate group will not be bulged and will
and more than three-eights inch in length ARE be free of dents. Cocking lever operating slot will be
cause for rejection. smooth with edges free of burs and sharp corners.
c. Scattered or uniformly fine pits or fine pits in a (4) The bottom plate group will be straight and
densely pitted area ARE allowable. tightly riveted.
d. Tool marks or scratches are acceptable (5) The sight bracket will fit tight and be free
regardless of length. These marks will appear of distortion. Component parts of the rear sight will not
as lines running laterally in the grooves or may be distorted so as to interfere with functioning.
run spirally across the top of the lands. Elevation and windage screws will function freely. The
e. Definitely ringed bores or bores ringed front sight will be in alignment and free from
sufficiently to bulge the outside surface of the distortion. The blade will be securely fastened in place.
barrel or barrel assembly ARE cause for Front sight will raise and lower without binding but will
rejection. not fit loosely on the machine gun.
f. Lands that appear dark due to coating of (6) Rivets must not be loose. The rivets in the
gilding metal from projectiles should NOT be receiver are not considered “loose” until there is
cause for rejection. perceptive movement between components,
g. Stellite lined barrel assemblies can be interference with function of the weapon, or possibility
identified by a gap, located at the junction of of the loss of a rivet. To determine the extent of loose
the liner and the tube. Presence of this gap is rivets, try to insert a 0.001 inch feeler gage between
NOT cause for rejection. the riveted components, top and bottom plate. The
h. Serrations will be well defined so as to retain feeler gage must go between the riveted components
barrel/barrel assembly in its setting by the for their entire length before the rivets are loose
locking spring. enough for turn-in of the weapon as unserviceable.
i. Barrels will be rejected when reject limit on Entrance of the gage at one point only is not cause for
breech bore gage is reached (figure 3-9). rejection.
j. Refer to TM 9-4933-208-34 for use of the (7) Receivers that will accept 0.010 inch feeler
barrel erosion gage on barrel assemblies. gage freely and without bind between side plates and
trunnion will be rejected. However, those receivers
Caution. Never attempt to check or gage a that accept the 0.010 inch feeler gage freely in the
“hot” barrel or barrel assembly. area 1 inch from rear end of the trunnion will be
acceptable.
3-10. Serviceability Standards for Casing and (8) Marking must be legible.
Barrel Jacket Group b. Barrel Jacket Group. The barrel jacket will not
be damaged so as to cause binding of the
a. Casing Group. barrel assembly in the front barrel bearing. The
(1) Steel trunnion block will NOT be cracked or barrel jacket will be held securely to the
severely damaged (figure 3-10). Chrome plated receiver by the machine screw.
trunnion blocks are preferred for Machine Guns, c. Retracting Bar Guide Group (M37 Only). The
M1919A4 and M37. Weapons with unplated trunion retracting bar guide spacer should be firmly
block will not be replaced unless grooves (damaged secured to the casing assembly. If locking wire
areas) exceed 0.010 inch in depth (Figure 3-11) is broken or missing, replace. The retracting
measured from the adjacent flat surface. Serviceability bar lock should function freely.

18
 TM 9-1005-212-25

Figure 3-1. Maintenance procedure to determine

serviceability of timing of Machine Guns, M1919A4
and M1919A6.

Figure 3-2. Maintenance procedure to determine

serviceability of timing for Machine Gun, M37.

19
TM 9-1005-212-25

Figure 3-3. Maintenance procedures to determine

serviceability of firing pin protrusion for Machine
Guns, M1919A4 and M1919A6

Figure 3-4. Maintenance procedures to determine

serviceability of firing pin protrusion for Machine
Gun, M37.

20
 TM 9-1005-212-25

Figure 3-5. Maintenance procedure to determine

serviceability of firing pin hole for Machine Guns,
M1919A4 and M1919A6.

Figure 3-6. Maintenance procedure to determine

serviceability of firing pin hole for Machine Gun,
M37.

21
TM 9-1005-212-25

Figure 3-7. Maintenance procedure for removing carbon from flash hider.

22
 TM 9-1005-212-25

Figure 3-8. Maintenance procedure for checking

barrel or barrel assembly with gun barrel reflector.

Figure 3-11. Maintenance procedures for

determining serviceability of chrome-plated
trunnion block with damage exceeding 0.010 inch
– NOT acceptable.

Figure 3-12. Maintenance procedure for

determining serviceability of a chrome-plated
trunnioin block with heavy chipped area – NOT
acceptable.

Figure 3-10. Maintenance procedures for

determining serviceability of cracked steel trunnion
block – NOT acceptable.

23
TM 9-1005-212-25

Figure 3-13. Maintenance procedures for determining serviceability of

pitted and slightly chipped trunnion block – ACCEPTABLE.

Section VI. REPAIR INSTRUCTION FOR TRIPOD, M2

3-11. Specific Repair Instruction c. Disassembly of the traversing and

elevating mechanism is restricted to the
a. For specific repair instructions of the absolute minimum required to replace
Tripod Mount, M2, Refer to table 3-4. defective components.
b. For removal and installation of major
groups and assemblies, refer to TM 9-
1005-212-10.

24
 Table 3-3. Direct and General Support Maintenance Procedures For Machine Gun-Continued

Group or assembly Disassembly/asse Inspection Repair Tests and adjustments

Tripod Mount Visually inspect tripod mount for general Repair or replace unserviceable
appearance. Check to insure that all components.
components are serviceable.

Traversing and Fig B-18 Check for missing plug in lower end of Replace items 1 thru 36, except 16, 18, Dial Pointer on
elevating mechanism To disassemble/ sleeve. Check upper elevating screw stop 22, 25 and 29, fig B-18, if necessary. handwheel and
assembly assemble upper and traversing slide lock lever for proper designation plate of
elevating screw functioning. Check lower elevating screw upper elevating screw
stop refer to figure stop spring and lock lever for tension and must coincide at “0”
8-14. fit of spring in dovetailed spring seat. reading.
Test upper and lower elevating screws
for binding. Check the dial pointer for
looseness. In the elevating handwheel
check headless pin for functioning on
click ring and setting of handwheel with
pointer. In the traversing handwheel
check for function of click pin, union nut
and scale dial and check traversing screw
for function with traversing handwheel
(screw should not bind). Markings must
be legible.

Head and leg groups Fig B-19 Check front leg to insure that it opens Replace items 1 thru 30 except 16, 26, The distance between
and closes without binding. Check 27 and 28, figure B-19, if needed sleeve and collar is not
functioning of sliding sleeve and sleeve to be less than one-
lock latch on right rear leg. In the tripod quarter or more than
head, check pintle, bolt and nut for one-half inch before
damaged threads, burs, and missing locking. Minimum
cotter pin. Check tripod head for cracks clearance between
and burs. Check function of pintle and pintle shoulder and
lock assembly. Check setscrew for tripod head 0.003 inch.
staking. Check tension of helical
compression springs in lock assembly.
Check bearing for burs. Check pintle lock
release cam for damage and pin for
looseness. Check lock assembly housing
screws for looseness and burs.
TM 9-1005-212-25

25
TM 9-1005-212-25

Figure 3-14. Maintenance procedures for utilizing screw stop tool on upper elevating mechanism of Tripod
Mount, M2.

Section VII. DEPOT MAINTENANCE INSTRUCTIONS

3-12. General ATTN: AMSWE-SMM-SA, Rock Island, Illinois

61201.
a. Depot maintenance instructions are
contained in USAWECOMDMWR 100-212 which b. Repair parts, special tools and equipment are
is available through Commanding General, listen in appendix B of this manual.
Headquarters, U. S. Army Weapons Command,

26
 TM 9-1005-212-25

CHAPTER 4

FINAL INSPECTION

4-1. General be corrected by replacement of defective

components.
The machine gun and mount must meet the b. Upon completion of firing, machine gun will
limits of serviceability as indicated in table 3-3 be properly cleaned and lubricated.
and 3-4.
4-3. Completion of Inspection
4-2. Function and Firing Tests
When the machine gun and/or mount have
a. The machine gun that has been repaired been restored to a completely serviceable
should be function fired whenever possible, to condition, it shall be certified that the item is
assure proper operation. The machine gun that acceptable for “return to user” or for “return to
fails to meet functioning and firing tests is to stock”.

27
TM 9-1005-212-25

28
 TM 9-1005-212-25

CHAPTER 5

DESTRUCTION OF MATERIEL TO PREVENT ENEMY USE

5.1 General or cannibalization. The reporting of the

destruction of equipment is to be through
a. Destruction of the machine gun when regular channels.
subject to capture or abandonment in the b. Priorities for destruction of repair parts
combat zone, will be undertaken only when in are:
the judgment of the commander concerned (1) Bolt
such action is necessary. If destruction is (2) Barrel
resorted to, the equipment must be so badly (3) Sighting equipment
damaged that it cannot be restored to a usable (4) Mount
condition in the combat zone either by repair

29
TM 9-1005-212-25

30
 TM 9-1005-212-25

APPENDIX A

REFERENCES

A-1. General

Refer to TM 9-1005-212-10 and pertinent vehicle operator’s manual.

31
TM 9-1005-212-25

32
 TM 9-1005-212-25

APPENDIX B

COMBINED ORGANIZATIONAL, DIRECT SUPPORT, GENERAL

SUPPORT, AND DEPOT MAINTENANCE REPAIR PARTS AND

SPECIAL TOOLS LIST

Section I. INTRODUCTION

B-1. Scope B-3. Explanation of Columns

This appendix lists repair parts, special tools The following provides an explanation of
and equipment required for the performance of columns in the tabular lists in Section II
organizational, direct support, general support through VI:
and depot maintenance of the machine guns a) Source, Maintenance, and Recoverability
and mount. Codes (SMR)
1) Source Code. Indicated the selection
B-2. General status and source for the listed item.
Source codes used are:
This Repair Parts and Special Tools List is
divided into the following sections: Code Explanation

a. Prescribed load allowance (PLA) – Section P Repair parts which are stocked in or supplied
II. A composite listing of repair parts, from the GSA/DSA, or Army supply system,
special tools, test and support equipment and authorized for use at indicated
having quantitative allowances for initial maintenance categories.
P2 Repair parts which are procured and stocked
stockage at the organizational level.
for insurance purposes because the combat
b. Repair Parts – Section III. A list of repair or military essentiality of the end item dic-
parts authorized for the performance of tates that a minimum quantity be available
maintenance at the organizational level in in the supply system.
figure and item number sequence. M Repair parts which are not procured or stocked
c. Special Tools, Test and Support Equipment but are to be manufactured in indicated
– Section IV. A list of special tools and maintenance levels.
equipment authorized for the performance A Assemblies which are not procured or stocked
of maintenance at the organizational level. as such but are made up of two or more
d. Repair Parts – Section V. A list of repair units. Such component units carry individual
FSNs and descriptions, are procured and
parts authorized for the performance of
stocked separately and can be assembled to
maintenance at the direct support, general form the required assembly at indicated
support, and depot level in figure and item maintenance categories.
number sequence. x Parts and assemblies which are not procured or
e. Special Tools and Equipment – Section VI. stocked and the mortality of which is
A list of special tools and equipment normally below that of the applicable end
authorized for the performance of item or component. The failure of such part
maintenance at the direct support, general or assembly should result in retirement of
support, and depot level. the end item from the supply system
X1 Repair parts which are not procured or
f. Federal Stock Number and Reference
stocked. The requirement for such items will
Number Index – Section VII. A list of be filled by use of the next higher assembly
Federal stock numbers in ascending or component.
numerical sequence, followed by a list of X2 Repair parts which are not stocked. The indi-
reference numbers appearing in all the cated maintenance category requiring such
listings, in ascending alpha-numeric repair parts will attempt to obtain through
sequence, cross-referenced to the cannibalization; if not obtainable through
illustration figure number and item cannibalization, such repair parts will be
number. requisitioned with supporting justification
through normal supply channels.

33
TM 9-1005-212-25
Code Explanation and repair parts issued with the item. A part
number or other reference number is followed by
G Major assemblies that are procured with
PEMA funds for initial issue only to be the applicable five—digit Federal supply code for
used as exchange assemblies at DSU manufacturers in parenthesis.
and GSU level. These assemblies will not
be stocked above DSU and GSLT level or d. Unit of Measure (U/M). A 2 character
returned to Depot supply level. alphabetic abbreviation indicating the amount or
quantity of the item upon which the allowances are
(2) Maintenance Code. Indicates the lowest
based, e.g., ft, ea, pr, etc.
category of maintenance authorized to install the
e. Quantity incorporated in Unit. Indicates the
listed item. The maintenance level codes are:
quantity of the item used in the functional group or
Code Explanation
assembly. A “V” appearing in this column in lieu of
C Crew or operator a quantity indicates that a definite quantity cannot
O Organizational be indicated (e.g. shims, spacers, etc.).
F Direct Support f. 15—Day Organizational Maintenance Allow-
H General Support ances Organizational Maintenance Allowances.
D Depot (1) The allowance columns are divided into
four subcolumns. Indicated in each subcolumn
(3) Recoverability Code. Indicates whether
unserviceable items should be returned for re- opposite the first appearance of each item is the
covery or salvage. Items not coded are expenda- total quantity of items authorized for the number
ble. Recoverability codes are: of equipments supported. Subsequent appearances
Code Explanation of the same item will have the letters “REF” in the
R Applied to repair parts (assemblies and allowance columns. Items authorized for use as
components) which are considered required but not for initial stockage are identified
economically repairable at Direct and with an asterisk in the allowance column.
General support maintenance levels. (2) The quantitative allowances for organi-
When the maintenance capability to zational level of maintenance represents one initial
repair these items does not exist, they prescribed load for a 15—day period for the
are normally disposed of at the GS level. number of equipments supported. Units and or-
When supply considerations dictate, ganizations authorized additional prescribed loads
some of these repair parts may be listed
will multiply the number of prescribed loads
for automatic return to supply for Depot
authorized by the quantity of repair parts reflected
level repair as set forth in AR 710—50.
in the appropriate density column to obtain the
When so listed, they will be replaced by
supply on an exchange basis. total quantity of repair parts authorized.
T High dollar value recoverable repair parts (3) Organizational units providing mainte-
which are subject to special handling and nance for more than 100 of these equipments shall
are issued on an exchange basis. Such determine the total quantity of parts required by
repair parts are normally repaired or converting the equipment quantity to a decimal
overhauled at depot maintenance factor by placing a decimal point before the next to
activities. last digit of the number to indicate hundredths,
U Repair parts specifically selected for and multiplying the decimal factor by the parts
salvage by reclamation units because of quantity authorized in the 51— 100 allowance
precious metal content, critical materials, column. Example, authorized allowance for 51—
high dollar value reusable casings, or 100 equipments is 12; for 140 equipments,
castings. multiply 12 by 1.40 or 16.80 rounded off to 17
S Repair parts and assemblies which are parts required.
economically repairable at DSU and GSU (4) Subsequent changes to allowances will be
activities and normally are furnished by
limited as follows: No change in the range of items is
supply on an exchange basis. When
authorized. If additional items are considered
items are determined by a GSU to be
uneconomically repairable, they will be necessary, recommendation should be to, U. S. Army
evacuated to a depot for evaluation and Weapons Command, ATTN: AMSWE—SMM—SA, Rock
analysis before final disposition. Island, Illinois 61201, for exception or revision to the
No Code Part will be considered expendable. allowance list. Revision to the range of items
Indicated authorized will be made by the above address based
b. Federal Stock Number. Indicates the Federal upon engineering experience, demand data, or
stock number assigned to the item and will be TAERS information.
used for requisitioning purposes. g. 30—Day DS/GS Maintenance Allowances.
c. Description. Indicates the Federal item name
and any additional description of the item required. Note. Allowances in GS column are for GS
The abbreviation “w/e” when used as a part of the maintenance only.
nomenclature, indicates the Federal stock number
includes all armament, equipment, accessories, (1) The allowance columns are divided into
three subcolumns. Indicated in each subcolumn,
34
 TM 9-1005-212-25

opposite the first appearance of each item, is the b. Exploded views in appendix B are numbered in
total quantity of items authorized for the number of disassembly sequence.
equipments supported. Subsequent appearances of
the same item will have the letters “REF” in the 8—5. How to Locate Repair Parts
applicable allowance columns. Items authorized for a. When Federal stock number or reference
use as required but not for initial stockage are number is unknown:
identified with an asterisk in the allowance column. (1) First. Using the table of contents determine
(2) The quantitative allowance for PS GS levels the functional group or assembly within which the
of maintenance will represent initial stockage for a repair part belongs. This is necessary since
30—day period for the number of equipments illustrations are prepared for the functional group or
supported. assembly, and the listings are divided into the same
(3) Determination of the total quantity of parts groups.
required for maintenance of more than 100 of these (2) Second. Find the illustration covering the
equipments can be accomplished by converting the functional group or assembly to which the repair part
equipment quantity to decimal factor by placing a belongs.
decimal point before the next to last digit of the (3) Third. Identify the repair part on the
number to indicate hundredths, and multiplying the illustration and note the illustration figure and item
decimal factor by the parts quantity authorized in the number of the repair part.
51-100 allowance column. Example, authorized (4) Fourth. Using the Repair Parts Listing, find
allowance for 51—100 equipments is 40; for 150 the functional group or assembly to which the repair
equipments, multiply 40 by 1.50 or 60 parts required part belongs and locate the illustration figure and
h. 1—Year Allowances Per 100 Equipments item number noted on the illustration.
Contingency Planning Purposes. Indicates opposite b. When Federal stock number or reference
the first appearance of each item the total quantity number is known:
required for distribution and contingency planning (1) First. Using the Index of Federal Stock
purposes. The range of items indicates total Numbers and Reference Numbers find the pertinent
quantities of all authorized items required to provide Federal stock number or reference number. This
for adequate support of 100 equipments for one index is in ascending FSN sequence followed by a list
year. of reference numbers in alphanumeric sequence,
i. Depot Maintenance Allowance Per 100 cross-referenced to the illustration figure number
Equipments. Indicates opposite the first appearance and item number.
of each item the total quantity authorized for depot (2) Second. Using the Repair Parts Listing, find
maintenance of 100 equipments. Subsequent the functional group or assembly of the repair part
appearances of the same item will have the letters and the illustration figure number and item
“REF” in the allowance column. Items authorized for number referenced in the Index of Federal Stock
use as required but not for initial stockage are Numbers and Reference Numbers.
identified with an asterisk in the allowance column.
j. Illustration.
(1) Figure Number. Indicates the figure
number of the illustration in which the item is shown.
(2) Item Number. Indicates the callout number
used to reference the item in the illustration.

8—4. Special Information

a. Identification of the usable on codes of this
publication are:

Code Used On

Blank
B M1919A4, M1919A6,
M37 w/o sights, and
M37 w/sights
D M1919A4
E M1919A6
0 M37 w/o sights and M37
w/sights
S M37 w/sights, M37 w/o
sights, and M1919A4
V M37 w/sights, M1919A4,
and M1919A6
W M2

35
TM 9-1005-212-25
B—6. Abbreviations PHOS-BLK-FIN ......... phosphate black finish
SL.......................... spool
Abbreviation Explanation SLTD ...................... slotted
TRAV...................... traversing
ADJ ....................... adjust UNF ....................... unified fine (thread)
BLK-OXIDE FIN ....... black-oxide finish U/ON...................... used on
CD- or ZN-PLTD....... cadmium or zinc plated VCI ........................ volatile corrosion inhibitor
CHAM .................... chamfer
CK-HD ................... countersunk -head
CRES ..................... corrosion resistant steel B—7. Federal Supply Codes for Manufacturers
CSK ....................... countersunk
FL-PT ..................... flat-point Code Manufacturer
LT ......................... light
MET ....................... metal 19204 ......... Rock Island Arsenal
NC......................... National coarse (thread) 19207 ......... U. S. Army Tank Automotive Command
NF ......................... National fine (thread) 96906 ......... Military Standard
PASS-FIN ............... passivated finish

36
 Section II. PRESCRIBED LOAD ALLOWANCE

(1) (2) (3)

15-DAY ORGANIZATIONAL
MAINT. ALLOWANCE
FEDERAL DESCRIPTION (a) (b) (c) (d)
SSTOCK 1-5 6-20 21-50 51-
NO. USABLE ON CODE 100
REPAIR PARTS:
MACHINE GUNS, M1919A4, M1919A6, AND M37
1005-342-1100 TRIGGER ..................................................................... … 2 2 2
1005-347-1264 PLATE ASSEMBLY, BACK ................................................O … … 2 2
1005-501-3441 PIN ASSEMBLY, BELT FEED PAWL....................................O … 2 2 2
1005-513-5057 SPRING, HELICAL, COMPRESSION................................... … 2 2 2
1005-513-5296 SPRING, HELICAL, COMPRESSION...................................O … … 2 2
1005-513-5297 SPRING, BELT FEED PAWL..............................................O … 2 2 2
1005-517-0491 LOCK, BARREL BEARING ................................................ … 2 2 2
1005-519-6284 NUT, BELT FEED LEVER PIVOT BUSHING ..........................E … 2 2 2
1005-550-8461 PAWL, BELT FEED .........................................................E … 2 2 2
1005-550-9186 PIN ASSEMBLY, FIRING ................................................. … 2 2 2
1005-556-1137 SEAR .......................................................................... … 2 2 2
1005-562-1076 EXTRACTOR, SMALL ARMS CARTRIDGE ............................E … 2 2 2
1005-597-0429 SPRING, HELICAL, COMPRESSION...................................E … 2 2 2
1005-601-7503 LEVER, BELT FEED ........................................................E … … … 2
1005-601-7513 SPRING, COVER EXTRACTOR .......................................... … 2 2 2
1005-613-1251 PLUNGER, BARREL EXTENSION ....................................... … … 2 2
1005-613-1253 PIN ASSEMBLY ............................................................. … … 2 2
1005-613-1255 PIN .............................................................................E … … 2 2
1005-613-1262 SLIDE, BELT FEED.........................................................E … 2 2 2
1005-613-1265 SPRING, SEAR.............................................................. … 2 2 2
1005-613-1317 LEVER, COCKING .......................................................... … … 2 2
1005-614-7212 HANDLE, BOLT .............................................................E … … 2 2
1005-614-7216 PAWL, BELT HOLDING ...................................................E … 2 2 2
1005-614-7217 PIN, BELT HOLDING PAWL .............................................E … … 2 2
1005-614-7222 ROD ASSEMBLY, DRIVING SPRING ..................................E … … 2 2
1005-614-7225 SPRING, HELICAL, COMPRESSION................................... … 2 2 2
1005-614-7230 SPRING, BARREL LOCKING............................................. … … 2 2
1005-614-7231 SPRING, HELICAL, COMPRESSION................................... … 2 2 2
1005-614-7299 BOLT, BREECH .............................................................E … … 2 2
1005-621-2654 SPRING, HELICAL, COMPRESSION...................................E … 2 2 2
1005-710-0059 PLATE ASSEMBLY, BACK ................................................E … … 2 2
1005-714-8399 BARREL ASSEMBLY .......................................................S … 2 2 2
1005-714-8400 BARREL ASSEMBLY .......................................................D … 2 2 2
1005-716-2248 STOP, SHORT ROUND....................................................O … 2 2 2
1005-718-8634 SWITCH, ALTERNATE FEED BOLT ....................................O … 2 2 2
1005-718-8642 SPRING, COVER LATCH..................................................O … … 2 2
1005-718-8670 PAWL, BELT HOLDING ...................................................O … 2 2 2
1005-718-8674 LEVER, BELT FEED ........................................................O … … … 2
1005-718-8679 SPRING ASSEMBLY, DRIVING .........................................O … 2 2 2
1005-718-8631 EXTRACTOR, SMALL ARMS CARTRIDGE ............................O … 2 2 2
1005-718-8684 BOLT, BREECH .............................................................O … … 2 2
1005-718-8685 BAR, RETRACTING ........................................................O … 2 2 2
1005-718-8701 CHUTE, LINK ................................................................O … … 2 2
1005-718-8774 PIN ASSEMBLY, BELT HOLDING PAWL..............................O … … 2 2
1005-718-8777 SLIDE, BELT FEED.........................................................O … … … 2
1005-731-2973 HANDLE ASSEMBLY .......................................................E … … 2 2
1005-840-3848 PAWL, BELT FEED .........................................................O … … … 2
5305-501-3848 SCREW, MACHINE.........................................................V … … 2 2
5305-558-3689 SETSCREW ..................................................................E … 2 2 2
5310-013-8544 WASHER, LOCK ............................................................E … … 2 2
5310-579-0079 WASHER, LOCK ............................................................E … 2 2 2
5315-234-1854 PIN, COTTER ................................................................E … 2 2 2
5315-502-0503 PIN, SHOULDER, HEADLESS ........................................... … … 2 2
5315-502-0567 PIN, GROOVED, HEADED ............................................... … … 2 2
5315-513-5259 PIN, SHOULDER, HEADLESS ...........................................O … … 2 2
 (1) (2) (3)
15-DAY ORGANIZATIONAL
MAINT. ALLOWANCE
FEDERAL DESCRIPTION (a) (b) (c) (d)
STOCK 1-5 6-20 21-50 51-
NO. USABLE ON CODE 100
5315-515-7434 PIN, GROOVED, HEADED ...............................................E … 2 2 2
5315-687-3788 PIN, SPRING ................................................................O … … … 2
5315-718-8632 PIN, GROOVED, HEADED ...............................................O … … 2 2
5315-833-3753 PIN, SPRING ................................................................O … … 2 2
5340-716-2161 RING, RETAINING .........................................................D … … 2 2
9505-248-9849 WIRE, STEEL, CARBON ..................................................O … … 2 2
TRIPOD MOUNT
1005-305-0725 SPRING, HELICAL, TORSION ..........................................W … 2 2 2
5306-513-9973 BOLT, MACHINE............................................................W … … … 2
5305-513-9989 SCREW, MACHINE.........................................................W … 2 2 2
5310-012-5754 WASHER, LOCK ............................................................W … 2 2 2
5310-513-9964 NUT, SLOTTED, HEXAGON..............................................W … 2 2 2
5315-903-3971 PIN, COTTER ................................................................W … … 2 2
TOOLS AND EQUIPMENT
MACHINE GUNS, M1919A4, M1919A4, AND M37
1005-288-3565 SWAB, SMALL ARMS CLEANING ...................................... … 2 2 2
1005-550-6573 CASE, SMALL ARMS CLEANING ROD ................................ … … … 2
1005-555-9696 ENVELOPE ...................................................................E … … … 2
1005-556-4174 BRUSH, CLEANING, SMALL ARMS .................................... 2 3 6 11
1005-559-3026 COVER ........................................................................E … … 2 2
1005-691-1381 BRUSH, CLEANING, SMALL ARMS .................................... … 2 2 3
1005-694-1662 BUFFER, CLEANING ROD................................................ … 2 2 3
1005-714-8549 BOX, SPARE PARTS .......................................................B … … … 2
1005-714-8550 BOX, SPARE PARTS .......................................................O … … … 2
1005-726-6109 ROD SECTION, CLEANING SMALL ARMS ........................... … 2 3 6
1005-726-6110 SWAB HOLDER SECTION, SMALL ARMS CLEANING ROD ..... … 2 2 3
1005-793-6761 HANDLE ASSEMBLY ....................................................... … 2 2 2
1005-839-6662 COVER, MACHINE GUN ..................................................B … … 2 2
4933-556-8334 WRENCH, COMBINATION ............................................... … … 2 2
4933-614-7277 WRENCH, SOCKET ........................................................ … … 2 2
4933-652-9950 EXTRACTOR, RUPTURED CARTRIDGE CASE....................... … 2 2
TRIPOD MOUNT
1005-659-1428 COVER, TRIPOD MOUNT.................................................W … … 2 2
 Section III. ORGANIZATIONAL REPAIR PARTS LIST

(1) (2) (3) (4) (5) (6) (7)

Source Maint And Recov Code 15 Day Organizational Illustration
Description Maintenance Alw

Qty (a) (b) (c) (d)

(a) (b) (c) Usable on Unit of Inc In 21- 51- (a) (b)
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas Stock 1-5 6-20 50 100 Figure No. Item No.
REPAIR PARTS FOR MACHINE GUNS
MAJOR GROUPS AND ASSEMBLIES
(M1919A4 AND M1919A6 ONLY)
P O R 1005-710-0059 PLATE ASSEMBLY, BACK: EA 1 * * 2 2 B-1 2
7100059 (19204) E
P O … 1005-614-7212 HANDLE, BOLT: EA 1 * * * 2 B-1 3
6147212 (19204) E
P C … 1005-714-8399 BARREL ASSEMBLY: EA 1 * 2 * 2 B-1 7
7148399 (19204) S
P C … 1005-714-8400 BARREL ASSEMBLY: EA 1 * 2 2 2 B-1 8
7148400 (19204) D
P O … 5315-234-1854 PIN, COTTER: S, PHOS-CTD, 1/16 DIA, HD 1 * 2 2 2 B-1 9
¾ LG
MS 24665-153 (96906) E
P O … 1005-517-0491 LOCK, BARREL BEARING: EA 1 * 2 2 2 B-1 17
7162161 (19204)
P O … 5340-716-2161 RING, RETAINING: EA 1 * * 2 2 B-1 20
7162161 (19204) D
P O … 1005-731-2973 HANDLE ASSEMBLY: CARRYING EA 1 * * 2 2 B-1 23
7312973 (19204) E
MAJOR GROUPS AND ASSEMBLIES
(M37 ONLY)
P O R 1005-347-4264 PLATE ASSEMBLY, BACK: EA 1 * * 2 2 B-2 1
8407780 (19204) O
P C … 1005-718-8679 SPRING ASSEMBLY, DRIVING: EA 1 * 2 2 2 B-2 2
7188679 (19204) O
P O … 5315-718-8632 PIN, GROOVED, HEADED: S, PHOS-FIN, EA 1 * * 2 2 B-2 3
0.460 MIN DIA, 0.462 MAX DIA (BOLT) O
P O … 1005-718-8685 BAR, RETRACTING: EA 1 * 2 2 2 B-2 4
7188685 (19204) O
P O … 1005-714-8399 BARREL ASSEMBLY: EA 1 REF REF REF REF B-2 8
7148399 (19204) S
P O … 5315-815-1405 PIN, COTTER: S, PHOS-CTD, 1/16 DIA, HD 1 * * * * B-2 9
½ LG (BOLT SWITCH)
MS 246666-151 (96906) O
 (1) (2) (3) (4) (5) (6) (7)
Source Maint And Recov Code 15 Day Organizational Illustration
Description Maintenance Alw

Qty (a) (b) (c) (d)

(a) (b) (c) Usable on Unit of Inc In 21- 51- (a) (b)
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas Stock 1-5 6-20 50 100 Figure No. Item No.
BOLT GROUP (M1919A4 AND M1919A6
ONLY)
P O R 1005-562-1076 EXTRACTOR, SMALL ARMS CARTRIDGE: EA 1 * 2 2 2 B-6 1
5521076 (19204) E
P O … 5315-502-0567 PIN, GROOVED, HEADED: FL-FIL-HD, S, EA 1 * * 2 2 B-6 7
PHOS-CTD, 0.205 SHANK DIA, 1.370
SHANK LG
5020567 (19204
P O … 1005-613-1317 LEVER, COCKING: EA 1 * * 2 2 B-6 8
6131317 (19204)
P O … 1005-556-4137 SEAR: EA 1 * 2 2 2 B-6 9
5564137 (19204)
P C … 1005-613-1265 SPRING, SEAR: EA 1 * 2 2 2 B-6 10
6131265 (19204)
P O R 1005-550-9186 PIN ASSEMBLY, FIRING: S, PHOS-CTD, EA 1 * 2 2 2 B-6 11
0.075 MAX STRIKING END DIA, 4.795
MAX O/A LG
5509186 (19204)
P O … 1005-614-7222 ROD ASSEMBLY, DRIVING SPRING: EA 1 * * 2 2 B-6 15
614722 (19204)
P O … 1005-621-2654 SPRING, HELICAL, COMPRESSION: S, EA 1 * 2 2 2 B-6 17
CD-PLTD, 0.045 DIA STK, 0.390 OD,
15-7/8 O/A LG, 103 COILS, DIRING
6212654 (19204)
P O … 1005-614-7299 BOLT, BREECH: EA 1 * * 2 2 B-6 18
6147299 (19204)
DRIVING SPRING ASSEMBLY AND BOLT
GROUP (M37 ONLY)
P C R 1005-718-8681 EXTRACTOR, SMALL ARMS CARTRIDGE: EA 1 * 2 2 2 B-7 5
7188681 (19204)
P O … 5315-502-0567 PIN, GROOVED, HEADED: FL-FIL-HD, S, EA 1 REF REF REF REF B-7 13
PHOS-CTD, 0.205 SHANK DIA, 1.370
SHANK LG
5020567 (19204)
P O … 1005-613-1317 LEVER, COCKING: EA 1 REF REF REF REF B-7 14
6131317 (19204)
P C … 1005-613-1265 SPRING, SEAR: EA 1 REF REF REF REF B-7 16
6131265 (19204)
P O … 1005-556-4137 SEAR: EA 1 REF REF REF REF B-7 15
5564137 (19204)
 (1) (2) (3) (4) (5) (6) (7)
Source Maint And Recov Code 15 Day Organizational Illustration
Description Maintenance Alw

Qty (a) (b) (c) (d)

(a) (b) (c) Usable on Unit of Inc In 21- 51- (a) (b)
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas Stock 1-5 6-20 50 100 Figure No. Item No.
P O R 1005-550-9186 PIN ASSEMBLY, FIRING: S, PHOS-CTD, EA 1 REF REF REF REF B-7 17
0.075 MAX STRIKING END DIA, 4.795
MAX O/A LG
5509186 (19204)
P C … 5315-833-3753 PIN, SPRING: SLOTTED, S, PHOS-CTD. EA 2 * * 2 2 B-7 21
5/32 NOM DIA, ¾ LG (BOLT SWITCH)
MS 16562-136 (96906) O
P C … 1005-718-8634 SWITCH, ALTERNATE FEED BOLT: EA 2 * 2 2 3 B-7 22
7188634 (19204) O
P C … 1005-718-8684 BOLT, BREECH: EA 1 * * 2 2 B-7 23
7188684 (19204) O
LOCK FRAME GROUP
P O … 1005-613-1253 PIN ASSEMBLY: ACCELERATOR AND EA 2 * * 2 2 B-8 1
BREECH LOCK
6131253 (19204)
P O … 1005-613-1251 PLUNGER, BARREL EXTENSION: EA 1 * * 2 2 B-8 3
6131251 (19204)
P O … 1005-513-5057 SPRING, HELICAL, COMPRESSION: S, EA 1 * 2 2 2 B-8 4
PHOS-CTD, 0.135 OD, 24 COILS,
BARREL PLUNGER
5135057 (19204)
P O … 5315-502-0503 PIN, SHOULDER, HEADLESS: CHAM, S, EA 1 * * 2 2 B-8 5
PHOS-CTD, 0.135 SMALLER SHANK DIA,
0.200 LARGER SHANK DIA, 0.250
SHOULDER, DIA, 1.310 O/A LG
5020503 (19204)
P O … 1005-614-7231 SPRING, HELICAL, COMPRESSION: S, EA 1 * 2 2 2 B-8 6
CD-PLTD, 0.031 STK SIZE, 0.220 OD,
0.280 O/A LG, 4 COILS, TRIGGER PIN
6147231 (19204)
P O … 1005-342-1100 TRIGGER: EA 1 * 2 2 2 B-8 7
8407769 (19204)
BARREL EXTENSION GROUP
P O … 1005-613-1253 PIN ASSEMBLY: ACCELERATOR AND EA 1 REF REF REF REF B-8 1
BREECH BLOCK
6131253 (19204)
P O … 1005-614-7230 SPRING, BARREL LOCKING: EA 1 * * 2 2 B-9 3
6147230 (19204)
COVER GROUP (M1919A4 AND M1919A6
ONLY)
P O … 5305-558-3689 SETSCREW: SLTD, S, PHOS-CTD, FL-PT, EA 1 * 2 2 2 B-10 1
3/8-24UNF3A, 0.235 LG
51962833 (19204) E
 (1) (2) (3) (4) (5) (6) (7)
Source Maint And Recov Code 15 Day Organizational Illustration
Description Maintenance Alw

Qty (a) (b) (c) (d)

(a) (b) (c) Usable on Unit of Inc In 21- 51- (a) (b)
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas Stock 1-5 6-20 50 100 Figure No. Item No.
P O … 5310-579-0079 WASHER, LOCK: S, CD-PLTD, 0.138 ID, HD 1 * 2 2 2 B-10 2
0.295 OD, 0.017 THK
MS 35333-37 (96906) E
P O … 5315-515-7434 PIN, GROOVED, HEADED: S, BLK-OXIDE EA 1 * 2 2 2 B-10 3
FIN., FL-HD 0.247 MIN DIA OF HD,
0.261 MAX DIA OF HD (BELT FEED
LEVER)
5157434 (19204)
P O … 1005-519-6284 NUT, BELT FEED LEVER PIVOT BUSHING: EA 1 * 2 2 2 B-10 4
5196284 (19204) E
P O … 5310-013-8544 WASHER, LOCK: INT-TEETH, S, PHOS- HD 1 * * 2 2 B-10 5
CTD, 3/8 BOLT SIZE E
P O … 1005-601-7503 LEVER, BELT FEED: EA 1 * * * 2 B-10 7
6017503 (19204) E
P O … 1005-613-1255 PIN: BELT FEED PAWL EA 1 * * 2 2 B-10 8
6131255 (19204) E
P O … 1005-550-8461 PAWL, BELT FEED: EA 1 * 2 2 2 B-10 9
5508461 (19204) E
P O … 1005-597-0429 SPRING, HELICAL, COMPRESSION: S, EA 1 * 2 2 2 B-10 10
0.032 DIA STK, 0.340 OD, 0.780 O/A
LG, 6 COILS, BELT FEED PAWL
6147224 (19204) E
P O … 1005-613-1262 SLIDE, BELT FEED: EA 1 * 2 2 2 B-10 11
6131262 (19204) E
P O … 1005-601-7513 SPRING, COVER EXTRACTOR: EA 1 * 2 2 2 B-10 12
6017513 (19204)
COVER GROUP (M37 ONLY)
P O … 5315-687-3788 PIN, SPRING: S, CD-PLTD, 0.094 DIA EA 1 * * * 2 B-11 1
0.688 LG, 0.022 THK (FEED LEVER PIN)
MS 9048-072 (96906)
P O … 5315-719-1238 PIN, STRAIGHT, HEADED: BELT FEED EA 1 * * * * B-11 2
LEVER
7191238 (19204)
P O … 1005-718-8674 LEVER, BELT FEED: EA 1 * * * 2 B-11 3
7188674 (19204) O
P O … 5315-513-5259 PIN, SHOULDER, HEADLESS: S, PHOS- EA 1 * * 2 2 B-11 4
FIN., SQ-END, 7132 LG O/A (BELT
FEED LEVER)
5135269 (19204)
P O … 1005-513-5296 SPING, HELICAL, COMPRESSION: S, EA 1 * * 2 2 B-11 5
0.024 DIA STK, 0.152 OD, 0.469 O/A
LG, 8 COILS, BELT FEED LEVER
5135296 (19204) O
 (1) (2) (3) (4) (5) (6) (7)
Source Maint And Recov Code 15 Day Organizational Illustration
Description Maintenance Alw

Qty (a) (b) (c) (d)

(a) (b) (c) Usable on Unit of Inc In 21- 51- (a) (b)
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas Stock 1-5 6-20 50 100 Figure No. Item No.
P O … 1005-501-3441 PIN ASSEMBLY, BELT FEED PAWL: EA 1 * * 2 2 B-11 6
5013441 (19204) O
P O … 1005-840-3848 PAWL, BELT FEED: EA 1 * * * 2 B-11 7
8403848 (19204) O
P O … 1005-513-5297 SPRING, BELT FEED PAWL: EA 1 * * 2 2 B-11 8
5135297 (19204) O
P O … 1005-718-8777 SLIDE, BELT FEED: EA 1 * * * 2 B-11 10
7188777 (19204) O
P O … 1005-601-7513 SPRING, COVER EXTRACTOR: EA 1 REF REF REF REF B-11 11
6017513 (19204)
P O … 5315-815-1405 PIN, COTTER: S, PHOS-CTD, 1/16 DIA, HD 1 REF REF REF REF B-11 12
½ LG (BOLT SWITCH)
MS 24665-151 (96906) O
P O … 1005-718-8642 SPRING, COVER LATCH: EA 1 * * 2 2 B-11 13
7188642 (19204) O
CASING AND BARREL JACKET GROUP
(M1919A4 AND M1919A6 ONLY)
P O … 5305-501-3258 SCREW, MACHINE: S, 0.370 MIN DIA EA 1 * * 2 2 B-14 12
OF HD, 0.373 MAX DIA OF HD
5013258 (19204) V
P O … 1005-716-2248 STOP, SHORT ROUND: EA 1 * 2 2 2 B-14 20
7162248 (19204) E
P O … 1005-614-7217 PIN, BELT HOLDING PAWL: EA 1 * * 2 2 B-14 22
6147217 (19204) E
P O … 1005-614-7216 PAWL, BELT HOLDER: EA 1 * 2 2 2 B-14 23
6147216 (19204) E
P O … 1005-614-7225 SPRING, HELICAL, COMPRESSION: S, EA 1 * 2 2 2 B-14 24
CD-PLT, 0.023 STK, 0.137 OD, 0.650
O/A LG, 13 COILS, BELT HOLDING PAWL
6147225 (19204)
CASING AND BARREL JACKET GROUP
(M37 ONLY)
P O … 5305-501-3258 SCREW, MACHINE: S, 0.370 MIN DIA EA 1 * * 2 2 B-15 12
OF HD, 0.373 MAX DIA OF HD
5013258 (19204) V
P O … 1005-718-8774 PIN ASSEMBLY, BELT HOLDING PAWL: EA 2 * * 2 2 B-15 17
7188774 (19204) O
P O … 1005-718-8670 PAWL, BELT HOLDING: EA 1 * 2 2 2 B-15 18
7188670 (19204) O
P O … 1005-614-7225 SPRING, HELICAL, COMPRESSION: S, EA 1 * 2 2 2 B-15 19
CD-PLTD, 0.023 STK, 0.137 OD, 0.650
O/A LG, 13 COILS, BELT HOLDING PAWL
6147225 (19204)
 (1) (2) (3) (4) (5) (6) (7)
Source Maint And Recov Code 15 Day Organizational Illustration
Description Maintenance Alw

Qty (a) (b) (c) (d)

(a) (b) (c) Usable on Unit of Inc In 21- 51- (a) (b)
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas Stock 1-5 6-20 50 100 Figure No. Item No.
P O … 1005-718-8701 CHUTE, LINK: EA 1 * * 2 2 21
7188701 (19204) O
P O … 1005-517-0491 LOCK, BARREL BEARING: EA 1 REF REF REF REF 26
5170491 (19204)
M O … ……………… WIRE, STEEL, CARBON: … … … … … … B-15 29
(MANUFACTURED FROM 9505-248-9849) O
REPAIR PARTS FOR TRIPOD MOUNT, M2
MAJOR GROUPS AND ASSEMBLIES
TRAVERSING AND ELEVATING
MECHANISM ASSEMBLY
P O … 5305-513-9989 SCREW, MACHINE: S, BUTTON HD, EA 1 * 2 2 2 B-18 2
NO. 10-32NF-2A, 5/16 LG
5139989 (19204) W
P O … 5310-012-5754 WASHER, LOCK: S, EXT-TEETH, EA 1 * 2 2 2 B-18 3
PHOS-CTD, NO. 12 SCREW SIZE
125754 (19204) W
P O … 1005-305-0725 SPRING, HELICAL TORSION: 0.040 DIA EA 1 * 2 2 2 B-19 6
STK, 0.427 ID, 0.507 OD, 2 COILS
8412296 (19204) W
HEAD AND LEG GROUP … … … … … … B-19
P O … 5315-903-3971 PIN, COTTER: S, PHOS-CTD, 1/8 DIA, EA 1 * * 2 2 B-19 1
1-1/4 LG
MG 24666-834 (96906)
P O … 5310-513-9964 NUT, SLOTTED, HEXAGON: S, PINTLE EA 1 * 2 2 3 B-19 2
BOLT 9/17-18NF-2, 25/64 THK
5139964 (19204) W
P O … 5306-513-9973 BOLT, MACHINE: S, PHOS-CTD, HEX- EA 1 * * * 2 B-19 3
HD, 9/16-18UNF-2A,3-11/32 LG
5139973 (19204) W
 Section IV. SPECIAL TOOLS AND EQUIPMENT

(1) (2) (3) (4) (5) (6) (7)

Source Maint And Recov Code 15 Day Organizational Illustration
Description Maintenance Alw

Qty (a) (b) (c) (d)

(a) (b) (c) Usable on Unit of Inc In 21- 51- (a) (b)
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas Stock 1-5 6-20 50 100 Figure No. Item No.
TOOLS AND EQUIPMENT AUTHORIZED
FOR UNIT REPLACEMENT CALIBER .30
MACHINE GUNS 1919A4, 1919A6 AND
M37
1005-228-3565 SWAB, SMALL ARMS CLEANING: PK … * 2 2 2
COTTON, 1-1/2 SQ (1000 IN PK)
1005-550-6573 CASE, SMALL ARMS CLEANING ROD: EA … * * * 2
CAL .30 M1
5506573
1005-556-4174 ENVELOPE: SPAREPARTS, M1, 4 X 3 EA … * * * 2
5559696 (19204) E
1005-556-4174 BRUSH, CLEANING, SMALL ARMS: BORE EA … * * 2 2
5564174 (19204)
1005-559-3026 COVER: SPARE BARREL EA … * * 2 2
5593026 (19204) E
1005-691-1381 BRUSH, CLEANING, SMALL ARMS: EA … * 2 2 2
CHAMBER
7790582 (19204)
1005-694-1662 BUFFER, CLEANING ROD: EA … * 2 2 2
7268275 (19204)
1005-714-8549 BOX, SPARE PARTS: EA … * * * 2
7148549 (19204) B
1005-714-8550 BOX, SPARE PARTS: EA … * * * 2
7148550 (19204) O
1005-726-6109 ROD SECTION, CLEANING, SMALL ARMS: EA … * 2 2 3
7266109 (19204)
1005-726-6110 SWAB HOLDER SECTION, SMALL ARMS EA … * 2 2 3
CLEANING ROD:
7266110 (19204)
1005-793-6761 HANDLE ASSEMBLY: CLEANING ROD EA … * 2 2 2
7266115 (19204)
R 1005-839-6662 COVER, MACHINE GUN: EA … * * 2 2
11686598 (19204) B
4933-556-8334 WRENCH, COMBINATION: M6 EA … * * 2 2 B-27
5568334 (19204)
4933-652-9950 EXTRACTOR, RUPTURED CARTRIDGE EA … * * 2 2
CASE:
7790352 (19204)
 (1) (2) (3) (4) (5) (6) (7)
Source Maint And Recov Code 15 Day Organizational Illustration
Description Maintenance Alw

Qty (a) (b) (c) (d)

(a) (b) (c) Usable on Unit of Inc In 21- 51- (a) (b)
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas Stock 1-5 6-20 50 100 Figure No. Item No.
TRIPOD MOUNT, M2
1005-659-1428 COVER, TRIPOD MOUNT: EA … * * 2 2
6591428 (19204) W
ORGANIZATIONAL MAINTENANCE TOOLS
AND EQUIPMENT (FOR ARMORERS USE)
THE 15-DAY LEVEL IS NOT APPLICABLE
1005-650-7349 ROLL, ORDNANCE WEAPONS SPARE EA … 1 … … … B-20 1
PARTS:
M13
6507349 (19204)
4933-614-7277 WRENCH, SOCKET: BARREL BEARING EA … 1 … … … B-20 2
PLUG,
CAL. .30
6147277
 Section V. DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE REPAIR PARTS LIST

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
REPAIR PARTS FOR MACHINE GUNS
MAJOR GROUPS AND ASSEMBLIES
(M1919A4 AND M1919A6)
A F … ………………… SHOULD GUN STOK GROUP: … 1 … … … … … … B-1 1
P O R 1005-710-0059 PLATE ASSEMBLY, BACK: EA 1 * 2 2 * 2 2 24 10 B-1 2
7100059 (19204) E
P O … 1005-614-7212 HANDLE, BOLT: EA 1 2 2 2 2 2 2 24 9 B-1 3
6147212 (19204) E
A F … ………………… BOLT GROUP: … 1 … … … … … … … … B-1 4
A F … ………………… LOCK FRAME GROUP: … 1 … … … … … … … … B-1 5
A F … ………………… BARREL EXTENSION GROUP: … 1 … … … … … … … … B-1 6
P C … 1005-714-8399 BARREL ASSEMBLY: EA 1 2 2 3 2 2 3 36 50 B-1 7
7148399 (19204) S
P C … 1005-714-8400 BARREL ASSEMBLY: EA 1 2 2 3 2 2 3 36 50 B-1 8
7148400 (19204) P
P O … 5215-234-1854 PIN, COTTER: S, PHOS-CTD, 1/16 DIA, ¾ LG HD 1 2 2 3 2 2 3 36 100 B-1 9
MS 24665-153 (96906) E
P F … 5310-012-5016 NUT, CASTELLATED, HEXAGON: S, PHOS-CTD, EA 1 2 2 2 2 2 2 24 24 B-1 10
¼-28UNF-2B, 7/16 W, 9/32 O/A H E
P F … 1005-600-8823 PLATE, MOVEABLE: COVER CATCH EA 1 * 2 2 * 2 2 12 6 B1 11
6008823 (19204) E
P F … 1005-600-8822 PLATE, FIXED, COVER CATCH EA 1 * 2 2 * 2 2 24 6 B-1 12
6008822 (19204) E
P F … 1005-209-8681 SPRING, HELICAL, COMPRESSION: S, 0.100 DIA EA 1 * 2 2 * 2 2 24 15 B-1 13
STK, 0.660 OD, 21/32 O/A LG, 4-1/2
COILS, COVER CATCH
6008825 (19204) E
P F … 5306-600-8824 SCREW, SHOULDER: EA 1 2 2 3 2 2 3 36 8 B-1 14
6008824 (19204) E
A F … ………………… COVER GROUP: … 1 … … … … … … … … B-1 15
P F … 1005-903-7216 FLASH HIDER: CAL. .30, M6 EA 1 2 2 3 2 2 3 36 52 B-1 16
7162300 (19204) B
O … 1005-517-0491 LOCK, BARREL BEARING: EA 1 2 2 3 2 2 3 36 57 B-1 17
5170491 (19204)
… 1005-391-1336 CLIP, RETAINING ASSEMBLY: EA 1 * 2 2 * 2 2 24 10 B-1 18
8410172 (19204) D
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 1005-716-2303 FLASH HIDER: M7 EA 1 * 2 2 * 2 2 24 24 B-1 19
7162303 (19204) D
P O … 5340-716-2161 RING, RETAINING: EA 1 * 2 2 * 2 2 24 10 B-1 20
7162161 (19204) D
A F … ………………… BIPOD ASSEMBLY: EA … … … … … … … … … B-1 21
7148442 D
P F … 1005-716-2160 BEARING, FRONT BARREL: EA 1 2 2 3 2 2 3 36 25 B-1 22
7162160 (19204) D
P O … 1005-731-2973 HANDLE ASSEMBLY: CARRYING EA 1 * 2 2 * 2 2 24 25 B-1 23
7312973 (19204) E
X1 … … ………………… CASING AND BARREL JACKET GROUP: … … … … … … … … … … B-1 24
CALIBER .30 MACHINE GUNE, M37
MAJOR GROUPS AND ASSEMBLIES (M37 ONLY)
P O R 1005-347-4264 PLATE ASSEMBLY, BACK: EA 1 * 2 2 * 2 2 24 10 B-2 1
8407780 (19204) O
P C … 1005-718-8679 SPRING ASSEMBLY, DRIVING: EA 1 2 2 3 2 2 3 36 20 B-2 2
7188679 (19204) O
P O … 5315-718-8632 PIN, GROOVED, HEADED: S, PHOS-FIN, 0.460 EA 1 2 2 2 2 2 2 24 12 B-2 3
MIN, DIAN, 0.462 MAX DIA (BOLT)
7188632 (19204) O
P O … 1005-718-8685 BAR, RETRACTING: EA 1 2 2 3 2 2 3 36 32 B-2 4
7188685 O
A F … ………………… BOLT GROUP: … 1 … … … … … … … … B-2 5
A F … ………………… LOCK FRAME GROUP: … 1 … … … … … … … … B-2 6
A F … ………………… BARREL EXTENSION GROUP: … 1 … … … … … … … … B-2 7
P C … 1005-714-8399 BARREL ASSEMBLY: EA 1 2 2 3 2 2 3 36 50 B-2 8
7148399 (19204) S
P O … 5315-815-1405 PIN, COTTER: S, PHOS-CTD, 1/16 DIA, ½ LG HD 1 * * * * * * * 200 B-2 9
(COVER PIN AND COVER LATCH SPRING)
MS 24665-151 (96906) O
P F … 5315-718-8650 PIN, STRAIGHT, HEADED: S, PHOS-FIN. EA 1 * 2 2 * 2 2 24 12 B-2 10
7/16 DIA OF HD (COVER)
7188650 (10204) O
A F … ………………… COVER GROUP: … 1 … … … … … … … … B-2 11
X1 … … ………………… CASING AND BARREL JACKET GROUP: … 1 … … … … … … … … B-2 12
SHOULDER GUN STOCK GROUP
P F … 1005-628-4541 CLAMP: STOCK, ASSY EA 1 * 2 2 * 2 2 24 20 B-3 1
6284541 (19204) D
P F … 1005-559-4543 STOCK, GUN, SHOULDER: EA 1 * 2 2 * 2 2 24 20 B-3 2
5594543 (19204) D
BACK PLATE ASSEMBLY (M1919A4 AND
M1919A6 ONLY)
P F … 1005-613-4059 SCREW, ADJUSTING: BACK PLATE EA 1 2 2 2 2 2 2 24 16 B-4 1
6134059 (19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100

Per 100 equip

equip cntgcy
Description 30-day ds maint. alw 30-day gs maint. alw Illustration

Qty
(a) (b)
Usable Unit Inc (b) (c) (b) (c)
Fig. Item
(a) (b) (c) on of In (a) 21- 51- (a) 21- 51-
No. No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 1-20 50 100 1-20 50 100
P F … 5315-513-5052 PIN, SHOULDER, HEADLESS: S, PHOS-CTD, EA 1 2 2 2 2 2 2 24 12 B-4 2
0.157 SHOULDER, DIA, 0.094 SHANK DIA,
1-3/32 O/A LG
5135052 (19204)
P F … 1005-209-8496 SPRING, HELICAL, COMPRESSION: S, 0.027 DIA EA 1 * 2 2 * 2 2 24 100 B-4 3
STK. 0.159 FREE OD, 15 COILS ADJ
SCREW PLUNGER
5135053 (19204)
P F … 1005-500-9374 DISK, SOLID, PLAIN: RED FIBER, 31/32 DIA, EA 22 2 2 3 2 2 3 36 48 B-4 4
0.127 THK
5009374 (19204)
P F … 1005-502-0581 PLATE, BUFFER: EA 1 2 2 2 2 2 2 25 9 B-4 5
5020581 (19204) E
P F … 5305-774-9614 SCREW, MACHINE: FL-HD, CRES, PASS-FIN., HD 1 * * 2 * * 2 24 25 B-4 6
NO. 8-36FN-2A X ½
MS 51960-47 (96906)
P F … 5310-550-0286 WASHER, LOCK: CSK, (80-82 DEG) EXT TOOTH, EA 1 2 2 3 2 2 3 36 50 B-4 7
S, CD-PLTD, 0.177 ID, 0.322 OD, 0.021 THK
MS 35336-15 (96906) E
P F … 1005-513-9969 SPRING, STOCK EA 1 2 2 3 2 2 3 36 10 B-4 8
5139969 (19204) E
X1 … … …………… PLATE, BACK … 1 … … … … … … … … B-4 9
5653469 E
BACK PLATE ASSEMBLY (M37 ONLY)
P F … 1005-613-4059 SCREW, ADJUSTING: BACK PLATE EA 1 REF REF REF REF REF REF REF REF B-5 1
6134059 (19204)
P F … 5315-513-5052 PIN, SHOULDER, HEADLESS: S, PHOS-CTD, EA 1 REF REF REF REF REF REF REF REF B-5 2
0.157 SHOULDER DIA, 0.094 SHANK DIA,
1-3/32 O/A LG
5135052
P F … 1005-209-8496 SPRING, HELIAL, COMPRESSIONG: S, 0.027 DIA EA 1 REF REF REF REF REF REF REF REF B-5 3
STK, 0.159 FREE OD, 15 COILS ADJ
SCREW PLUNGER
5135053 (19204)
P F … 1005-500-9374 DISK, SOLID, PLAIN: RED FIBER, 31/32 DIA, EA 22 REF REF REF REF REF REF REF REF B-5 4
0.127 THK (BUFFER)
5009374 (19204)
P F … 1005-718-8617 PLATE, BUFFER: BACK PLATE EA 1 * 2 2 * 2 2 24 6 B-5 5
7188617 (19204) O
P F … 1005-606-9674 SAFETY, SMALL ARMS, TRIGGER EA 1 * 2 2 * 2 2 24 12 B-5 6
8410907 (19204) O
P F … 1005-718-8616 PLUNGER, TRIGGER SAFETY SPRING: EA 1 * 2 2 * 2 2 24 5 B-5 7
7188616 (19204) O
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 1005-718-8668 SPRING, HELICAL, COMPRESSION: S, CD-PLTD EA 1 * 2 2 * 2 2 24 100 B-5 8
W/DICHROMATE-DIP, 0.020 DIA STK, 0.165
OD, 0.700 O/A LG, 13 COILS
TRIGGER SAFETY
7188668 (19204) O
P D … 5315-718-8661 PIN, STRAIGHT, HEADLESS: S, PHOS-CTD, EA 1 … … … … … … … 3 B-5 9
0.124 MIN DIA, 0.125 MAX DIA, 2-9/64
LG (BACK PLATE LATCH LOCK)
7188661 (19204) O
P D … 5315-718-8649 PIN, STRAIGHT, HEADLESS: S, PHOS-CTD, EA 1 … … … … … … 3 B-5 10
0.155 MIN DIA, 0.156 MAX DIA, 1-7/64
LG (BACK PLATE LATCH) O
P F … 1005-021-2430 LOCK, BACK PLATE LATCH: BACK PLATE WITH EA 1 * * 2 * * 2 24 6 B-5 11
BUFFER ASSY
11686454 (19204) O
P F … 1005-015-2974 LATCH, BACK PLATE: PLATE ASSY EA 1 * 2 2 * 2 2 24 10 B-5 12
8407786 (19204) O
P F … 1005-718-8669 SPRING, HELICAL, COMPRESSION: S, 0.026 DIA EA 1 * 2 2 * 2 2 24 100 B-5 13
STK, 0.214 OD, 4 COILS, BACK PLATE
LATCH LOCK
7188669 (19204) O
P F … 1005-718-8623 PLUNGER, BACK PLATE LATCH SPRING: EA 1 * * 2 * * 2 24 4 B-5 14
7188623 (19204) O
P F … 1005-718-8658 SPRING HELICAL, COMPRESSION: S, 0.034 DIA EA 1 * 2 2 * 2 2 24 100 B-5 15
STK, 0.150 ID, 0.803 O/A LG, 10 COILS
BACK PLATE LATCH
7188658 (19204) O
X1 … … …………… PLATE: BACK … 1 … … … … … … … … B-5 16
7188683 O
BOLT GROUP (M1919A4 AND M1919A6 ONLY)
P O R 1005-562-1076 EXTRACTOR, SMALL ARMS CARTRIDGE: EA 1 2 2 3 2 2 3 36 24 B-6 1
5621076 (19204) E
P F … 5315-502-0570 PIN, STRAIGHT, HEADLESS: EJECTOR AND EA 2 2 2 3 2 2 3 36 51 B-6 2
EXTRACTOR CAM PLUNGER
5020570 (19204) E
P F … 1005-601-7497 EJECTOR, SMALL ARMS CARTRIDGE: EA 1 2 2 3 2 2 3 36 10 B-6 3
6017497 (19204) E
P F … 1005-626-1001 PLUNGER, EXTRACTOR: CAM 0.600 O/A LG EA 1 2 2 2 2 2 2 24 12 B-6 4
6261101 (19204) E
P F … 1005-209-8490 SPRING, HELICAL, COMPRESSION: S, 0.020 DIA EA 1 2 2 3 2 2 2 36 100 B-6 5
STK, 0.187 OD, 9-1/2 COILS
EXTRACTOR CAM PLUNGER
6147228 (19204) E
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
X1 … … …………… EXTRACTOR: … 1 … … … … … … … … B-6 6
6544087 E
P O … 5315-502-0567 PIN, GROOVED, HEADED: FL-FIL-HD, S, EA 1 * 2 2 * 2 24 12 B-6 7
PHOS-CTD, 0.205 SHANK DIA,
1.370 SHANK LG
5020567 (19204)
P O … 1005-613-1317 LEVER, COCKING: EA 1 * 2 2 * 2 2 24 10 B-6 8
6131317 (19204)
P O … 1005-556-4137 SEAR: EA 1 2 2 3 2 2 3 36 10 B-6 9
5564137 (19204)
P C … 1005-613-1265 SPRING, SEAR: EA 1 2 2 3 2 2 3 36 10 B-6 10
6131265 (19204)
P O R 1005-550-9186 PIN ASSEMBLY, FIRING: S, PHOS-CTD, 0.075 EA 1 2 2 3 2 2 3 36 10 B-6 11
MAX STRIKING END DIA, 4.795 MAX O/A LG
5509186 (19204)
P F … 5315-502-0498 PIN, STRIAGHT, HEADLESS: S, PHOS-CTD, 0.094 EA 2 * 2 2 * 2 2 24 12 B-6 12
MAX DIA, 0.4865 O/A LG
5020498 (19204)
P F … 1005-209-8491 SPRING, HELICAL, COMPRESSION: S, 0.0414 EA 1 2 2 3 2 2 3 36 26 B-6 13
DIA
STK, 0.259 OD, 50 COILS, FIRING PIN
6147229 (19204)
X1 … … …………… PIN, FIRING … 1 … … … … … … … … B-6 14
5508462
P O … 1005-614-7222 ROD ASSEMBLY, DRIVING SPRING: EA 1 * 2 2 * 2 2 24 12 B-6 15
6147222 (19204) E
X1 … … ROD: DRIVING SPRING, 0.272 IN. DIA … 1 … … … … … … … B-6 16
6017509 E
P O … 1005-621-2654 SPRING, HELICAL: COMPRESSION: S, CD-PLTD, EA 1 2 2 3 2 2 3 36 45 B-6 17
0.045 DIA STK, 0.390 OD, 15-7/8 O/A
LG, 103 COILS, DRIVING
6212654 (19204) E
P O … 1005-614-7299 BOLT, BREECH: EA 1 * 2 2 * 2 2 24 12 B-6 18
6147299 (19204) E
DRIVING SPRING ASSEMBLY AND BOLT GROUP
(M37 ONLY)
P F … 5315-718-8622 PIN, SHOULDER, HEADLESS: S, PHOS-FIN., EA 1 2 2 3 2 2 3 36 50 B-7 1
CHAM END, 5/16 LG (DRIVING SPRING)
7188622 (19204) O
P F … 1005-718-8612 COLLAR, DRIVING SPRING ROD: EA 1 2 2 2 2 2 2 24 16 B-7 2
7188612 (19204) O
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100

Per 100 equip

equip cntgcy
Description 30-day ds maint. alw 30-day gs maint. alw Illustration

Qty
(a) (b)
Unit Inc (b) (c) (b) (c)
Fig. Item
(a) (b) (c) Usable on of In (a) 21- 51- (a) 21- 51-
No. No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 1-20 50 100 1-20 50 100
P F … 1005-719-1544 SPRING, HELICAL, COMPRESSION: S, 0.032 DIA EA 1 2 2 3 2 2 3 36 50 B-7 3
STK, 0.398 OD, 13-5/16 O/A LG, 58
COILS, DRIVING SPRING ROD
7191544 (19204) O
P F … 1005-718-8776 ROD, DRIVING SPRING: EA 1 * 2 2 * 2 2 24 10 B-7 4
7188776 (19204) O
P C R 1005-718-8681 EXTRACTOR, SMALL ARMS CARTRIDGE: EA 1 2 2 3 2 2 3 36 24 B-7 5
7188681 (19204) O
P F … 1005-606-8416 PIN, EJECTOR: EA 1 * 2 2 * 2 2 24 10 B-7 6
8413954 (19204) O
P F … 1005-096-3222 EJECTOR, SMALL ARMS CARTRIDGE: EA 1 * 2 2 * 2 2 24 15 B-7 7
8412270 (19204) O
P F … 1005-513-5303 SPRING, HELICAL, COMPRESSION: S, 0.025 X EA 1 2 2 2 2 2 3 36 100 B-7 8
0.039 DIA STK, 0.168 OD, 0/320 O/A LG,
6 COILS, EJECTOR
5135303 (19204) O
P F … 5315-513-5246 PIN, STRAIGHT, HEADED: S, PHOS-FIN., FL-HD, EA 1 * 2 2 * 2 2 24 12 B-7 9
0.130 LG O.004 DIA OF HD EXTRACTOR
PLUNGER
5135246 (19204) O
P F … 1005-718-8664 PLUNGER, EXTRACTOR: EA 1 2 2 2 2 2 2 24 12 B-7 10
7188664 (19204) O
P F … 1005-513-5305 SPRING, HELICAL, COMPRESSION: S, 0.024 DIA EA 1 2 2 3 2 2 3 36 100 B-7 11
STK, 0.185 OD, 9-1/2 COILS, EXTRACTOR
PLUNGER
5135305 (19204) O
X1 … … …………… EXTRACTOR: … 1 … … … … … … … … B-7 12
7188709
P O … 5315-502-0567 PIN, GROOVED, HEADED: FL-FIL-HD, S, EA 1 REF REF REF REF REF REF REF REF B-7 13
PHOS-CTD, 0.205 SHANK DIA, 1.370
SHANK LG
5020567 (19204)
P O … 1005-613-1317 LEVER, COCKING: EA 1 REF REF REF REF REF REF REF REF B-7 14
9131317 (19204)
P O … 1005-556-4137 SEAR: EA 1 REF REF REF REF REF REF REF REF B-7 15
5564137 (19204)
P C … 1005-613-1265 SPRING, SEAR: EA 1 REF REF REF REF REF REF REF REF B-7 16
6131265 (19204)
P O R 1005-550-9186 PIN, ASSEMBLY, FIRING: S, PHOS-CTD, 0.075 EA 1 REF REF REF REF REF REF REF REF B-7 17
MAX STRIKING END DIA, 4.795 MAX O/A LG
5509186 (19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100

Per 100 equip

equip cntgcy
Description 30-day ds maint. alw 30-day gs maint. alw Illustration

Qty
(a) (b)
Usable Unit Inc (b) (c) (b) (c)
Fig. Item
(a) (b) (c) on of In (a) 21- 51- (a) 21- 51-
No. No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 1-20 50 100 1-20 50 100
P F … 5315-502-0498 PIN, STRAIGHT, HEADLESS: S, PHOS-CTD, EA 1 REF REF REF REF REF REF REF REF B-7 18
0.094 MAX DIA, 0.4685 O/A LG
5020498 (19204)
P F … 1005-209-8491 SPRING, HELICAL, COMPRESSION: S, 0.0414 DIA EA 1 REF REF REF REF REF REF REF REF B-7 19
STK, 0.259 OD, 60 COILS, FIRING PIN
6147229 (19204)
X1 … … …………… PIN: FIRING … 1 … … … … … … … … B-7 20
5508462
P C … 5315-833-3753 PIN, SPRING: SLOTTED, S, PHOS-CTD, 5/32 EA 2 * 2 2 * 2 2 24 12 B-7 21
NOM DIA, ¾ LG (BOLT SWITCH)
MS 16562-136 (96906) O
P C … 1005-718-8634 SWITCH, ALTERNATE FEED BOLT: EA 2 2 3 6 2 3 6 72 15 B-7 22
7188634 (19204) O
P C … 1005-718-8684 BOLT, BREECH: EA 1 * 2 2 * 2 2 24 24 B-7 23
7188684 (19204) O
LOCK FRAME GROUP
P O … 1006-613-1253 PIN ASSEMBLY: ACCELERATOR AND EA 2 2 2 2 2 2 2 24 10 B-8 1
BREECH LOCK
6131253 (19204)
P F … 1005-556-4142 ACCELERATOR, MACHINE GUN: EA 1 2 2 2 2 2 2 24 24 B-8 2
5564142 (19204)
P O … 1005-613-1251 PLUNGER, BARREL EXTENSION: EA 1 2 2 2 2 2 2 24 15 B-8 3
6131251 (19204)
P O … 1005-513-5057 SPRING, HELICAL, COMPRESSION: S, 0.047 DIA EA 1 2 2 3 2 2 3 36 14 B-8 4
STK, 0.387 OD, 24 COILS, BARREL PLUNGER
5135057 (19204)
P O … 5315-502-0503 PIN, SHOULDER, HEADLESS: CHAM, S, PHOS-CTD, EA 1 * 2 2 * 2 2 24 12 B-8 5
0.135 SMALLER SHANK DIA, 0.200 LARGER
SHANK DIA, 0.250 SHOULDER DIA, 1.310
O/A LG, 4 COILS, TRIGGER PIN
5020503 (19204)
P O … 1005-614-7231 SPRING, HELICAL, COMPRESSION: S, CD—PLTD, EA 1 2 2 3 2 2 3 36 100 B-8 6
0.031 STK STIZE, 0.220 OD, 0.280 O/A LG
4 COILS, TRIGGER PIN
6147231 (19204)
P O … 1005-342-1100 TRIGGER: EA 1 2 2 3 2 2 3 36 9 B-8 7
8407769 (19204)
P F … 1005-550-9182 FRAME, LOCK: EA 1 2 2 3 2 2 3 36 12 B-8 8
5509182 (19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100

Per 100 equip

equip cntgcy
Description 30-day ds maint. alw 30-day gs maint. alw Illustration

Qty
(a) (b)
Unit Inc (b) (c) (b) (c)
Fig. Item
(a) (b) (c) Usable on of In (a) 21- 51- (a) 21- 51-
No. No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 1-20 50 100 1-20 50 100
BARREL EXTENSION GROUP
P O … 1005-613-1253 PIN ASSEMBLY: ACCELERATOR AND EA 1 REF REF REF REF REF REF REF REF B-9 1
BREECHBLOCK
6131253 (19204)
P F … 1005-718-4158 LOCK, BREECH: EA 1 * 2 2 * 2 2 24 5 B-9 2
7184158 (19204)
P O … 1005-614-7230 SPRING, BARREL LOCKING: EA 1 * 2 2 * 2 2 24 25 B-9 3
6147230 (19204)
P F … 1005-718-8690 EXTENSION ASSEMBLY, BARREL: EA 1 * 2 2 * 2 2 24 12 B-9 4
7188690 (19204)
COVER GROUP (M1919A4 AND M1919A6 ONLY)
P O … 5305-558-3689 SETSCREW: SLTD, S, PHOS-CTD, FL-PT, EA 1 2 2 3 2 2 3 36 12 B-10 1
3/8-24 UNF-3A, 0.235 LG
5196283 (19204) E
P O … 5310-579-0079 WASHER, LOCK: S, CD-PLTD, 0.138 ID, HD 1 2 2 3 2 2 3 36 10 B-10 2
0.295 OD, 0.017 THK
MS 35333-37 (96906) E
P O … 5315-515-7434 PIN, GROOVED, HEADED: S, BLK-OXIDE FIN, EA 1 2 2 3 * 2 3 36 20 B-10 3
FL-HD, 0.257 MIN DIA OF HD, 0.261 MAX
DIA OF HD (BELT FEED LEVER)
5157434 (19204) E
P O … 1005-519-6284 NUT, BELT FEED LEVER PIVOT BUSHING: EA 1 2 2 3 2 2 3 36 5 B-10 4
5196284 (19204) E
P O … 5310-013-8544 WASHER, LOCK: INT-TEETH, S, HD 1 2 2 2 2 2 2 24 12 B-10 5
PHOS-CTD, 3/8 BOLT SIZE
MS 35333-59 (96906) E
P F … 1005-515-7374 BUSHING, MACHINE THREAD: BELT FEED EA 1 2 2 3 2 2 3 36 7 B-10 6
LEVER PIVOT
5157374 (19204) E
P O … 1005-601-7503 LEVER, BELT FEED: EA 1 * 2 2 * 2 2 24 12 B-10 7
6017503 (19204) E
P O … 1005-613-1255 PIN: BELT FEED PAWL EA 1 2 2 2 2 2 2 24 11 B-10 8
6131255 (19204) E
P O … 1005-550-8461 PAWL, BELT FEED: EA 1 2 2 3 2 2 3 36 5 B-10 9
5508461 (19204) E
P O … 1005-597-0429 SPRING, HELICAL, COMPRESSION: S, 0.032 DIA EA 1 2 2 3 2 2 3 36 100 B-10 10
STK, 0.340 OD, 0.780 O/A LG, 6 COILS
BELT FEED PAWL
6147224 (19204) E
P O … 1005-613-1262 SLIDE, BELT FEED: EA 1 2 2 3 2 2 3 36 6 B-10 11
6131262 (19204) E
P O … 1005-601-7513 SPRING, COVER EXTRATOR: EA 1 2 2 3 2 2 3 36 11 B-10 12
6017513 (19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100

Per 100 equip

equip cntgcy
Description 30-day ds maint. alw 30-day gs maint. alw Illustration

Qty
(a) (b)
Unit Inc (b) (c) (b) (c)
Fig. Item
(a) (b) (c) Usable on of In (a) 21- 51- (a) 21- 51-
No. No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 1-20 50 100 1-20 50 100
P F … 1005-550-9801 COVER ASSEMBLY: EA 1 * * 2 * * 2 24 4 B-10 13
5509801 (19204) E
COVER GROUP (M37 ONLY)
P O … 5315-687-3788 PIN, SPRING: S, CD-PLTD, 0.094 DIA, 0.688 EA 1 * 2 2 * 2 2 24 12 B-11 1
LG, 0.022 THK (FEED LEVER PIN)
MS 9048-072 (96906) O
P O … 5315-179-1238 PIN, STRAIGHT, HEADED: BELT FEED LEVER EA 1 * * 2 * * 2 24 5 B-11 2
7191238 (19204) O
P O … 1005-718-8674 LEVER, BELT FEED: EA 1 * 2 2 * 2 2 24 12 B-11 3
7188674 (19204) O
P O … 5315-513-5259 PIN, SHOULDER, HEADLESS: S, PHOS-FIN, EA 1 2 2 2 2 2 2 24 12 B-11 4
SQ-END, 7/32 LG O/A (BELT FEED LEVER)
5135259 (19204) O
P O … 1005-513-5296 SPRING, HELICAL, COMPRESSION: S, 0.024 DIA EA 1 * 2 2 * 2 2 24 100 B-11 5
STK, 0.152 OD, 0.469 O/A LG, 8 COILS,
BELT FEED LEVER
5135296 (19204) O
P O … 1005-501-3441 PIN ASSEMBLY, BELT FEED PAWL: EA 1 * 2 2 * 2 2 24 8 B-11 6
5013441 (19204) O
P O … 1005-840-3848 PAWL, BELT FEED: EA 1 * 2 2 * 2 2 24 10 B-11 7
8403848 (19204) O
P O … 1005-513-5297 SPRING, BELT FEED PAWL: EA 1 * 2 2 * 2 2 24 100 B-11 8
5135297 (19204) O
P F … 1005-613-4155 ARM, BELT FEED PAWL: EA 1 * 2 2 * 2 2 24 5 B-11 9
6134155 (19204) O
P O … 1005-718-8777 SLIDE, BELT FEED: EA 1 * 2 2 * 2 2 24 10 B-11 10
7188777 (19204) O
P O … 1005-601-7513 SPRING, COVER EXTRACTOR: EA 1 REF REF REF REF REF REF REF REF B-11 11
6017513 (19204) O
P O … 5315-815-1405 PIN, COTTER: S, PHOS-CTD, 1/16 DIA, ½ LG HD 1 REF REF REF REF REF REF REF REF B-11 12
(COVER PIN AND COVER LATCH SPRING)
MS 24665-151 (96906) O
P O … 1005-718-8642 SPRING, COVER LATCH: EA 1 * 2 2 * 2 2 24 25 B-11 13
7188642 (19204) O
P F … 1005-840-7224 COVER ASSEMBLY: EA 1 * 2 2 * 2 2 24 7 B-11 14
8407224 (19204) O
P F … 1005-718-8618 PIN, COVER LATCH: S, 0.094 X 19/32 COVER EA 2 * * 2 * * 2 24 9 B-11 15
LATCH KNOB
7188618 (19204) O
X1 … … …………… KNOB: COVER LATCH … 2 … … … … … … … … B-11 16
7188640
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 1005-718-8666 PIN, COVER LATCH: S, 0.094 X 23/32 EA 1 * * 2 * * 2 24 9 B-11 17
7188666 (19204) O
X1 … … …………… SHAFT: COVER LATCH … 1 … … … … … … … … B-11 18
7188635 (19204) O
P F … 1005-718-8643 LATCH, COVER: EA 1 * * 2 * * 2 24 9 B-11 19
7188643 (19204) O
X1 … … …………… STOP: COVER LATCH … 1 … … … … … … … … B-11 20
7188621 O
P D … 1005-718-8625 STUD, COVER ASSEMBLY: EA 1 … … … … … … … 5 B-11 21
7188625 (19204) O
X1 … … …………… COVER: … 1 … … … … … … … … B-11 22
8407226 O
BIPOD ASSEMBLY
P F … 5305-515-2774 THUMBSCREW: S, PHOS-FIN, 5/16-24UNF-2A, EA 4 2 2 3 2 2 3 36 100 B-12 1
17/32 LG (BIPOD)
5152774 (19204) D
P F … 5310-011-8774 WASHER, FLAT: S, PHOS-CTD, 11/32 ID, HD 2 2 2 3 2 2 3 36 10 B-12 2
11/16 OD, 0.065 THK
118774 (19204)
P F … 1005-731-2235 LEG: BIPOD (BRAZED) EA 2 * 2 2 * 2 2 24 50 B-12 3
7312235 (19204) D
P F … 1005-731-2238 KEY, BIPOD ASSEMBLY: EA 2 2 2 3 2 2 3 36 60 B-12 4
7312238 (19204) D
P F … 1005-731-2236 LEG: SLIDING, RH (WELDED AND BRAZED) EA 1 * 2 2 * 2 2 24 24 B-12 5
7212236 (19204) D
P F … 1005-731-2237 LEG: SLIDING, LH (WELDED AND BRAZED) EA 1 * 2 2 * 2 2 24 24 B-12 6
7212237 (19204) D
P F … 5306-143-3287 SCEW, CAP, HEXAGON-HEAD: S, PHOS-CTD, EA 2 * 2 2 * 2 2 24 20 B-12 7
5/16-24UNF-2A X 1-1/2
MS 51108-29 (96906) D
P F … 1005-620-0952 REST: BIPOD EA 1 2 2 3 2 2 3 36 15 B-12 8
6200952 (19204) D
P F … 1005-552-1092 HEAD: BIPOD EA 1 2 2 2 2 24 24 B-12 9
5621092 (19204)
CARRYING HANDLE ASSEMBLY
P F … 5310-665-9659 NUT, PLAIN, HEXAGON: S, PHOS-CTD, EA 1 * 2 2 * 2 2 24 5 B-13 1
¼-20UNC-2B, 7/16 W, 7/32 THK
MS 35690-403 (96906) E
P F … 5310-274-8714 WASHER, LOCK: SPLIT, LT, S, PHOS-CTD, EA 1 * 2 2 * 2 2 24 5 B-13 2
¼ SCREW SIZE
MS 35337-63 (96906) E
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 5305-068-0502 SCREW, CAP, HEXAGON HEAD: S, PHOS-CTD, HD 1 * 2 * * 2 24 5 B-13 3
¼-20UNF-2A, ¾ LG
MS 90725-6 (96906) E
P F … 5305-731-2900 SCREW, MACHINE: S, PHOS-CTD, FL-FIL-HD, EA 1 * 2 2 * 2 2 24 12 B-13 4
NO. 10-32NF-2A
7312900 (19204) E
P F … 5310-274-8710 WASHER, LOCK: SPLIT, LT, S, PHOS-CTD, HD 1 * * 2 * * 2 24 5 B-13 5
NO. 10 SCREW SIZE
MS 35338-62 (96906) E
P F … 1005-731-3098 GRIP: CARRYING HANDLE ASSEMBLY EA 1 2 2 2 2 2 2 24 24 B-13 6
7313098 (19204) E
X1 … … …………… BODY: CARRYING HANDLE, ASSY … 1 … … … … … … … … B-13 7
7312977 E
CASING AND BARREL JACKTER GROUP
(M1919A4 AND M1919A6 ONLY)
P F … 5315-845-4231 PIN, SPRING: TUBULAR, COILED, S, PHOS-FIN, 1 2 2 2 2 24 100 B-14 1
1/16 NOM DIA, 9/16 LG (REAR SIGHT
WINDAGE KNOB)
MS 39086-56 (96906)
P F … 1005-600-8809 KNOB, REAR SIGHT WINDAGE SCREW: EA 1 * * 2 * * 2 24 10 B-14 2
6008809 (19204) V
P F … 1005-501-3155 PLUNGER, REAR SIGHT WINDAGE CLICK: EA 1 * 2 2 * 2 2 24 25 B-14 3
5013155 (19204) V
P F … 1005-501-3154 SPRING, HELICAL, COMPRESSION: EA 1 * 2 2 * 2 2 24 100 B-14 4
5013154 (19204) V
P F … 1005-515-2429 SCREW, WINDAGE, REAR SIGHT: EA 1 * 2 2 * 2 2 24 25 B-14 5
5152429 (19204) V
P F … 1005-554-5964 LEAF, SIGHT ASSEMBLY, REAR, FOLDING: EA 1 * 2 2 * 2 2 24 8 B-14 6
5545964 (19204) V
P F … 5305-501-3167 SCREW, REAR SIGHT WINDAGE: EA 1 2 2 2 2 2 2 24 50 B-14 7
5013167 (19204) V
P F … 1005-513-2430 SCALE, REAR SIGHT WINDAGE: EA 1 * * 2 * * 2 24 4 B-14 8
5152430 (19204) V
P F … 1005-726-6108 SPRING, REAR SIGHT BASE: EA 1 * * 2 * * 2 24 10 B-14 9
7266108 (19204) V
P D … 5315-516-2810 PIN, SHOULDER, HEADLES: S-PHOS-CTD EA 1 … … … … … … … 4 B-14 10
SQ. ENDS, 0.312 LG O/A STOP,
(REAR SIGHT LEAF)
5162810 (19204) V
P D … 1005-515-9870 BUSHING: REAR SIGHT WINDAGE SCREW EA 1 … … … … … … … 5 B-14 11
5159870 (19204) V
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P O … 5305-501-3258 SCREW, MACHINE: S, 0.370 MIN DIA OF HD, EA 1 * 2 2 * 2 2 24 30 B-14 12
0.373 MAX DIA OF HD
5013258 (19204) V
A F … …………… FRONT SIGHT GROUP … 1 … … … … … … … … B-14 13
P D … 5305-013-3617 SCREW, MACHINE: FL-HD, S, PHOS-CTD, HD 1 … … … … … … … 20 B-14 14
NO. 12-32NF-2A X 1/4
MS 35244-68 (96906)
P H … 1005-556-2503 JACKET, BARREL: EA 1 … … … * 2 2 24 5 B-14 15
5562503 (19204) S
P H … 1005-716-0455 JACKET, BARREL: EA 1 … … … * 2 2 24 5 B-14 16
7160455 (19204) D
P F … 1005-710-6949 LATCH, COVER: EA 1 2 2 3 2 2 3 36 25 B-14 17
7106949 (19204) E
P F … 6305-502-0527 SCREW, MACHINE: SLTD-DRIVE, SGLE CHAM, EA 1 2 2 2 2 2 2 24 476 B-14 18
S, PHOS-CTD, 5/16 24UNF-3A, 3/8 LG
(BREECH LOCK CAM)
5020527 (19204)
P F … 1005-556-4133 CAM, LOCK, BREECH: EA 1 2 2 2 2 24 7 B-14 19
5564133 (19204)
P O … 1005-716-2248 STOP, SHORT ROUND: EA 1 2 2 3 2 2 3 36 5 B-14 20
7162248 (19204) E
P F … 1005-964-9390 STOP, FRONT CARTRIDGE: SHORT ROUND EA 1 2 2 2 2 2 2 24 12 B-14 21
7791622 (19204) E
P O … 1005-614-7217 PIN, BELT HOLDING PAWL: EA 1 2 2 2 2 2 2 24 11 B-14 22
6147217 (19204) E
P O … 1005-614-7216 PAWL, BELT HOLDING: EA 1 2 2 3 2 2 3 36 13 B-14 23
6147217 (19204) E
P O … 1005-614-7225 SPRING, HELICAL, COMPRESSION: S, CD-PLTD, EA 1 2 2 3 2 2 3 36 100 B-14 24
0.023 STK, 0.137 OD, 0.650 O/A LG,
13 COILS, BELT HOLDING PAWL
6147225 (19204)
P D … 5320-502-0589 RIVET, SOLID: CK-HD, S, 0.218 X 0.655 EA 1 … … … … … … … 5 B-14 25
(REAR CARTRIDGE STOP)
5020589 (19204) E
P D … 1005-613-1258 STOP, REAR CARTRIDGE: EA 1 … … … … … … … 10 B-14 26
6131258 (19204) E
P D … 5320-502-4602 RIVET, SOLID: CK-HD, S, 0.188 X 0.025 EA 4 … … … … … … … 20 B-14 27
(MOUNT ADAPTER)
5024602 (19204)
P D … 5320-502-0600 RIVET, SOLID: CK-HD, S, 0.342 X 0.025 EA 4 … … … … … … … 75 B-14 28
(TRUNNION)
5020600 (19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100

Per 100 equip

equip cntgcy
Description 30-day ds maint. alw 30-day gs maint. alw Illustration

Qty
(a) (b)
Unit Inc (b) (c) (b) (c)
Fig. Item
(a) (b) (c) Usable on of In (a) 21- 51- (a) 21- 51-
No. No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 1-20 50 100 1-20 50 100
P D … 1005-614-7093 BLOCK: TRUNNION ASSY EA 1 … … … … … … … 20 B-14 29
6147093 (19204) E
P F … 5320-502-0514 RIVET, SOLID: 60 DEG FLUSH-CK-HD, S, EA 4 2 2 3 2 2 3 36 10 B-14 30
0.155 SHANK DIA, 0.420 LG (EXTRACTOR
CAM, EXTRACTOR FEED CAM)
5020514 (19204)
P F … 1005-550-8452 CAM, EXTRACTOR: EA 1 * 2 2 * 2 2 24 6 B-14 31
5508452 (19204) E
P F … 1005-601-7469 CAM, FEED EXTRACTOR: EA 1 * 2 2 * 2 2 24 3 B-14 32
6017469 (19204) E
P D … 5320-515-2737 RIVET, SOLID: CK-HD, S, 0.187 X 0.437 EA 16 … … … … … … … 10 B-14 33
(BOTTOM PLATE)
5162737 (19204)
P D … 5320-502-0711 RIVET, SOLID: TOP PLATE, SHORT EA 2 … … … … … … … 5 B-14 34
5029711 (19204)
P D … 5320-502-0522 RIVET, SOLID: OVAL-CK-HD, 8, 0.20 X 2.08 EA 1 … … … … … … … 5 B-14 35
(TOP PLATE, LONG)
5020522 (19204)
P D … 5320-502-0601 RIVET, SOLID: CK-HD, S, 0.186 X 2.557 EA 1 … … … … … … … 5 B-14 36
(SIDE PLATE, SMALL)
5020601 (19204)
P D … 5320-516-0656 RIVET, SOLID: 60 DEG-CK-HD, S, PHOS-CTD, EA 2 … … … … … … … 15 B-14 37
0.187 SHK DIA, 0.495 SHK LG (SIGHT BASE)
5160656 (19204) E
P D … 5320-502-0509 RIVET, SOLID: CK-HD, S, 0.155 X 0.655 EA 4 … … … … … … … 10 B-14 38
(BELT HOLDING PAWL BRACKET)
5020509 (19204)
X … … …………… CASING ASSEMBLY: … 1 … … … … … … … … B-14 39
7114037 D
X … … …………… CASING ASSEMBLY: … 1 … … … … … … … … B-14 40
6535358 B
CASING AND BARREL JACKET GROUP
(M37 ONLY)
P F … 5315-845-4231 PIN, SPRING: TUBULAR, COILED, S, PHOS-FIN, EA 1 REF REF REF REF REF REF REF REF B-15 1
1/16 NOM DIA, 9/16 LG (REAR SIGHT
WINDAGE KNOB)
MS 39086-56 (9606) V
P F … 1005-600-8809 KNOB, REAR SIGHT WINDAGE SCREW: EA 1 REF REF REF REF REF REF REF REF B-15 2
6008809 (19204) V
P F … 1005-501-3155 PLUNGER, REAR SIGHT WINDAGE CLICK: EA 1 REF REF REF REF REF REF REF REF B-15 3
5013155 (19204) V
P F … 1005-501-3154 SPRING, HELICAL, COMPRESSION: EA 1 REF REF REF REF REF REF REF REF B-15 4
5013154 (19204) V
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100

Per 100 equip

equip cntgcy
Description 30-day ds maint. alw 30-day gs maint. alw Illustration

Qty
(a) (b)
Unit Inc (b) (c) (b) (c)
Fig. Item
(a) (b) (c) Usable on of In (a) 21- 51- (a) 21- 51-
No. No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 1-20 50 100 1-20 50 100
P F … 1005-515-2429 SCREW, WINDAGE, REAR SIGHT: EA 1 REF REF REF REF REF REF REF REF B-15 5
5152429 (19204) V
P F … 1005-554-5964 LEAF, SIGHT ASSEMBLY, REAR, FOLDING: EA 1 REF REF REF REF REF REF REF REF B-15 6
6545964 (19204) V
P F … 5305-501-3167 SCREW, REAR SIGHT WINDAGE: EA 2 REF REF REF REF REF REF REF REF B-15 7
5013167 (19204) V
P F … 1005-515-2430 SCALE, REAR SIGHT WINDAGE: EA 1 REF REF REF REF REF REF REF REF B-15 8
5152430 (19204) V
P F … 1005-7266108 SPRING, REAR SIGHT BASE: EA 1 REF REF REF REF REF REF REF REF B-15 9
7266108 (19204) V
P D … 5315-516-2810 PIN, SHOULDER, HEADLESS: S, PHOS-CTD, EA 1 … … … … … … … REF B-15 10
SQ. ENDS, 0.312 LG O/A STOP,
(REAR SIGHT LEAF)
5162810 (19204) V
P D … 1005-515-9870 BUSHING: REAR SIGHT WINDAGE SCREW EA 1 … … … … … … … REF B-15 11
5159870 (19204) V
P O … 5305-501-3258 SCREW, MACHINE: S, 0.370 MIN DIA OF HD, EA 1 REF REF REF REF REF REF REF REF B-15 12
0.373 MAX DIA OF HD
5013258 (19204) V
A F … …………… FRONT SIGHT GROUP … 1 … … … … … … … … B-15 13
P F … 5315-597-4297 PIN, SPRING: S, CD-PLTD, 0.078 DIA, 3/4 LG, EA 1 * 2 2 * 2 2 24 3 B-15 14
0.018 THK (COVER DETENT PAWL)
585900 (19204) O
P F … 1005-602-2106 PAWL, COVER, DETENT: EA 1 * * 2 * * 2 24 5 B-15 15
8407223 (19204) O
P F … 1005-840-7222 SPRING, HELICAL, COMPRESSION: S, CD-PLTD, EA 2 * 2 2 * 2 2 24 200 B-15 16
W/DICHROMATE-DIP, 0.045 DIA STK, 0.255 OD,
0.934 O/A LG, 13 COILS, COVER DETENT PAWL
8407222 (19204) O
P O … 1005-718-8774 PIN ASSEMBLY, BELT HOLDING PAWL: EA 2 2 2 2 2 2 2 24 24 B-15 17
7188774 (19204) O
P O … 1005-718-8670 PAWL, BELT HOLDING: EA 1 2 2 3 2 2 3 36 10 B-15 18
7188670 (19204) O
P O … 1006-614-7225 SPRING, HELICAL, COMPRESSION: S, CD-PLTD, EA 1 2 2 3 2 2 3 36 100 B-15 19
0.023 STK, 0.137 OD, 0.650 O/A LG,
13 COILS, BELT HOLDING PAWL
6147225 (19204)
P F … 1005-718-8655 STOP, REAR CARTRIDGE: EA 1 2 2 2 2 2 2 24 10 B-15 20
7188655 (19204) O
P O … 1005-718-8701 CHUTE, LINK: EA 1 2 2 2 2 2 2 24 24 B-15 21
7188701 (19204) O
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 1005-718-8693 STOP, FRONT CARTRIDGE: EA 1 2 2 2 2 2 2 24 5 B-15 22
7188693 (19204) O
P F … 5305-502-0527 SCREW, MACHINE: SLTD-DRIVE, SGLE CHAM, EA 1 2 2 2 2 2 2 24 46 B-15 23
S, PHOS-CTD, 5/16-24UNF-3A, 3/8 LG
(BREECH LOCK CAM)
5020527 (19204)
P F … 1005-556-4133 CAM, LOCK, BREECH: EA 1 * 2 2 * 2 2 24 7 B-15 24
5564133 (19204)
P F … 1005-092-8972 BEARING, BARREL, FRONT: EA 1 2 2 2 2 2 2 24 8 B-15 25
8412118 (19204) O
P O … 1005-517-0491 LOCK, BARREL, BEARING: EA 1 2 2 3 2 2 3 36 57 B-15 26
5170491 (19204)
P D … 5305-013-3617 SCREW, MACHINE: FL-HD, S, PHOS-CTD HD 1 … … … … … … … 20 B-15 27
NO. 10-32NF-2A X 1/4
MS 35244-68 (96906)
P H … 1005-556-2503 JACKET, BARREL: EA 1 … … … * 2 2 24 5 B-15 28
5562503 (19204) S
M O … …………… WIRE, STEEL, CARBON: … … … … … … … … … … B-15 29
(MANUFACTURED FROM 9505-248-9849) O
P F … 5305-313-9434 SCREW, CAP, SOCKET HEAD: RETRACTING EA 4 2 2 2 2 2 2 24 50 B-15 30
BAR GUIDE
8414823 (19204) O
P F … 1005-738-2248 GUIDE, RETRACTING-BAR, FRONT, S, 0.500 W, EA 1 * 2 2 * 2 2 24 8 B-15 31
0.295 H, 1.750 O/A LG, 2 HOLES
8414732 (19204) O
P F … 1005-738-2249 GUIDE, RETRACTING-BAR, FRONT, S, 0.500 W, EA 2 * 2 2 * 2 2 24 8 B-15 32
0.295 H, 1.750 O/A LG, 2 HOLES
8414733 (19204) O
A F … …………… RETRACTING BAR GROUP … 1 … … … … … … … … B-15 33
P F … 5320-502-0514 RIVET, SOLID: 60 DEG FLUSH-CK-HD, S, EA 4 2 2 3 2 2 3 36 10 B-15 34
0.155 SHANK DIA, 0.420 LG (EXTRACTOR
CAM, EXTRATOR, FEED CAM)
5020514 (19204)
P F … 1005-840-1861 CAM, FEED EXTRACTOR: SIDE PLATE EA 1 * * 2 * * 2 24 3 B-15 35
8401861 (19204) O
P F … 1005-718-8694 CAM, EXTRACTOR: BREECH LOCK EA 1 * * 2 * * 2 24 3 B-15 36
7188694 (19204) O
P D … 5320-502-0601 RIVET, SOLID: CK-HD, S, 0.186 X 2.557 EA 2 … … … … … … … 3 B-15 37
(SIDE PLATE, SMALL)
5020601 (19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P D … 5320-515-2737 RIVET, SOLID: CK-HD, S, 0.187 X 0.437 EA 16 … … … … … … … 10 B-15 38
(BOTTOM PLATE)
5152737 (19204)
P D … 5320-502-4602 RIVET, SOLID: CK-HD, S, 0.188 X 0.505 EA 4 … … … … … … … 20 B-15 39
(MOUNT ADAPTER)
5024602 (19204)
P D … 5320-502-0711 RIVET, SOLID: TOP PLATE, SHORT EA 2 … … … … … … … 5 B-15 40
5020711 (19204)
P D … 5320-502-0522 RIVET, SOLID: OVAL-CK-HD, S, 0.20 X 208 EA 1 … … … … … … … 5 B-15 41
(STOP PLATE, LONG)
5020522 (19204)
P D … 5320-502-0509 RIVET, SOLID: CK-HD, S 0.155 X 0.655 EA 6 … … … … … … … 10 B-15 42
(BELT HOLDING PAWL BRACKET)
5020509 (19204)
P D … 5320-502-0600 RIVET, SOLID: CK-HD, S, 0.3427 X 2.025 EA 2 … … … … … … … 75 B-15 43
(TRUNNION)
5020600 (19204)
X1 … … …………… CASING ASEMBLY: … 1 … … … … … … … … B-15 44
8414735 O
FRONT SIGHT GROUP
P F … 5306-515-6884 BOLT, SHOULDER: S, PHOS-FIN, FL-HD, EA 1 * 2 2 * 2 2 24 10 B-16 1
0.310 IN. 0.005 DIA OF HD (BEARING,
FRONT SIGHT)
5156884 (19204)
P F … 1005-840-1980 POST, FRONT SIGHT, ASSEMBLY: EA 1 * 2 2 * 2 2 24 10 B-16 2
8401980 (19204) V
P F … 5315-840-1923 PIN, STRAIGHT, HEADLESS: DOWEL, S, EA 2 * 2 2 * 2 2 24 10 B-16 3
0.063 X 0.390 (FRONT SIGHT POST)
8401923 (19204) V
P F … 1005-840-1976 BLADE, FRONT SIGHT: EA 1 2 2 3 2 2 3 36 12 B-16 4
8401976 (19204) V
P F … 1005-840-1975 NUT, ADJUSTING, FRONT SIGHT: BLADE EA 1 * 2 2 * 2 2 24 8 B-16 5
8401975 (19204) V
P F … 1005-840-1979 PLUNGER, POST, FRONT SIGHT: EA 1 * 2 2 * 2 2 24 4 B-16 6
8401979 (19204) V
P F … 1005-840-1977 SPRING, HELICAL, COMPRESSION: S, FRONT EA 1 * 2 2 * 2 2 24 100 B-16 7
SIGHT PLUNGER, 0.020 DIA STK, 0.123 OD,
14 COILS
8401977 (19204) V
X1 … … …………… POST, FRONT SIGHT: … 1 … … … … … … … … B-16 8
8401978 V
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 5315-515-6881 PIN, SHOULDER, HEADLESS: S, PHOS-CTD, EA 1 * 2 2 * 2 2 24 25 B-16 9
SQ. END, 0.546 MIN LG O/A, 0.562 MAX
LG O/A (FRONT SIGHT)
5156881 (19204) V
P F … 1005-209-8680 SPRING, HELICAL, COMPRESSION: S, 0.035 DIA EA 1 * 2 2 * 2 2 24 100 B-16 10
STK, 0.224 OD, 1.000 O/A LG, 15 COILS
(FRONT SIGHT BODY)
5156882 (19204) V
P F … 1005-714-2261 BODY: FRONT SIGHT BRACKET EA 1 2 2 3 2 2 3 36 8 B-16 11
7142261 (19204) V
RETRACTING BAR GROUP (M37 ONLY)
P F … 5315-718-8615 PIN, STRAIGHT, HEADLESS: S, PHOS-CTD, EA 1 2 2 3 2 2 3 36 36 B-17 1
0.615 MIN DIA, 0.0625 MAX DIA
(RETRACTING-BAR LOCK)
7188615 (19204) O
P F … 1005-718-8671 LOCK, REATRACTING BAR: EA 1 * 2 2 * 2 2 24 10 B-17 2
7188671 (19204) O
P F … 1005-718-8614 PLUNGER, RETRACTING BAR LOCK: EA 1 * 2 2 * 2 2 24 8 B-17 3
7188614 (19204) O
P F … 1005-502-0541 SPRING, HELICAL, COMPRESSION: S, 0.028 DIA EA 1 * 2 2 * 2 2 24 100 B-17 4
STK, 0.175 OD, 12 COILS, RETRACTING BAR
GUIDE PLUNGER
5020541 (19204) O
P F … 4730-718-8654 PLUG, MACHINE THREAD: EA 1 * 2 2 * 2 2 24 5 B-17 5
(RETRACTING-BAR GUIDE PLUNGER)
7188654 (19204) O
P F … 1005-718-8657 SPRING, HELICAL, COMPRESSION: S, EA 1 * 2 2 * 2 2 24 100 B-17 6
0.024 DIA STK, 0.150 OD, 8 COILS,
RETRACTING BAR LOCK PLUBGER 7188657
(19204) O
P F … 1005-718-5915 PLUNGER, RETRACTING-BAR GUIDE: EA 1 2 2 2 2 2 2 24 5 B-17 7
7185915 (19204) O
P F … 1005-738-2247 GUIDE, RETRACTING-BAR, REAR: U/ON EA 1 2 2 2 2 24 8 B-17 8
CASING ASSEMBLY 8414731 (19204) O
REPAIR PARTS FOR TRIPOD MOUNT, M2
TRAVERSING AND ELEVATING MECHANISM
ASSEMBLY
P F R 1005-557-4620 MECHANISM ASSEMBLY, TRAVERSING AND EA 1 * 2 2 * 2 2 24 6 B-18 1
ELEVATING: 5574620 (19204) W
P O … 5305-513-9989 SCREW, MACHINE: S, BUTTON HD, PHOS- EA 1 2 2 3 2 2 3 36 8 B-18 2
CTD, NO. 10-32NF-2A, 5/16 LG
5139989 (19204) W
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P O … 5310-012-5754 WASHER, LOCK: S, EXT-TEETH, PHOS- EA 1 2 2 3 2 2 3 36 24 B-18 3
CTD, NO. 12 SCREW SIZE 125754 (19204) W
P F … 1005-519-4313 LEVER, TRAVERSING SLIDE LOCK: EA 1 2 2 3 2 2 3 36 5 B-18 4
5194313 (19204) W
P F … 1005-513-9988 SCREW, TRAVERSING SLIDE LOCK: EA 1 2 2 2 2 2 2 24 10 B-18 5
5139988 (19204) W
P O … 1005-305-0725 SPRING, HELICAL, TORSION: 0.040 DIA EA 1 2 2 3 2 2 3 36 24 B-18 6
STK, 0.427 ID, 0.507 OD, 2 COILS
8412295 (19204) W
P F … 5310-061-7325 NUT, SELF LOCKING, HEXAGON: S, HD 1 2 2 2 2 24 8 B-18 7
CD- OR ZN-PLTD, ¼-28UNF-3B,
7/16 W, 5/16 THK MS 21045-4 (96906) W
P F … 1005-517-4192 WASHER, THRUST: S, PLAIN, PHOS- EA 1 2 2 2 2 2 2 24 8 B-18 8
BLK-FIN, 17/64 ID, 0.500 OD, 0.062
THK TRAV SCREW NUT 5174192 (19204) W
P F … 5310-935-3750 NUT, SELF-LOCKING, HEXAGON: S, PHOS- EA 1 2 2 2 2 24 8 B-18 9
CTD, 5/16-24UNF-3B, 1/2 W, 11/32 THK
MS 519434 (96906) W
P F … 1005-615-8375 HANDWHEEL, TRAVERSING: EA 1 2 2 2 2 2 2 24 4 B-18 10
6158375 (19204) W
P F … 1005-915-5615 SPRING, HELICAL, COMPRESSION: S, EA 1 2 2 2 2 24 6 B-18 11
BLK-OXIDE-FIN, 0.017 STK SIZE, 0.051
ID, 0.085 OD, 0.360 FREE O/A LG,
P F … 1005-517-1495 PIN, CLICK, ELEVATING, AND TRAVERSING EA 1 2 2 2 2 24 6 B-18 12
MECHANISM: S, CONE-PT, BLK-OXIDE FIN,
0.154 DIA, 0.312 LG 5171495 (19204) W
P F … 1005-588-3490 RING, TRAVERSING MECHANISM CLICK: EA 1 2 2 2 2 24 6 B-18 13
5174175 (19204) W
P F … 4730-517-1491 NUT, UNION: LOCKING TRAVERSING EA 1 2 2 2 2 24 8 B-18 14
SCALE
5171491 (19204)
P F … 1005-517-1492 DIAL, SCALE: TRAVERSING MECHANISM EA 1 2 2 2 2 24 6 B-18 15
5171492 (19204) W
X1 … … …………… SCREW, TRAVERSING … 1 … … … … … … … … B-18 16
6166490 W
P F … 5315-616-5517 KEY, WOODRUFF: S, 3/32 X 5/16 (NO. 207) EA 1 * 2 2 * 2 2 24 10 B-18 17
MS 35756-2 (96906) W
X1 … … …………… YOKE, UPPER ELEVATING SCREW … 1 … … … … … … … … B-18 18
6166489 W
P F … 5340-517-4113 PIN, QUICK RELEASE: EA 1 * 2 2 * 2 2 24 5 B-18 19
5174113 (19204) W
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 1005-51-1460 CHAIN ASSEMBLY, SINGLE LEG: MACHINE EA 1 * 2 2 * 2 2 24 5 B-18 20
GUN FASTENING PIN (ELEV SCREW JOINT
PIN)
5141460 (19204)
P F … 4030-262-1571 HOOK, CHAIN: S, 0.105 X 15/16 REACH EA 2 * 2 2 * 2 2 24 5 B-18 21
506883 (19204) W
X1 … … …………… CHAIN AND SWIVEL (FOR ALTERNATE, SEE … 1 … … … … … … … … B-18 22
CHAIN ASSEMBLY,
5141460) 7122102
P F … 1005-840-8768 STOP, UPPER ELEVATING SCREW: EA 1 * 2 2 * 2 2 24 6 B-18 23
8408768 (19204) W
P F … 1005-514-0485 RING, EXTERNALLY THREADED: EA 1 * 2 2 * 2 2 24 8 B-18 24
5140485 (19204) W
X1 … … …………… SCREW, ELEVATING, LOWER … 1 … … … … … … … … B-18 25
6108210 W
P F … 1005-513-9994 RING: CLICK, ELEV HANDWHEEL EA 1 * 2 2 * 2 2 24 6 B-18 26
5139994 (19204) W
P F … 1005-610-8211 HANDWHEEL, ELEVATING EA 1 * 2 2 * 2 2 24 4 B-18 27
6108211 (19204) W
P F … 5355-513-9982 POINTER, DIAL: EA 1 * 2 2 * 2 2 24 6 B-18 28
5139982 (19204) W
X1 … … …………… SCREW: ELEVATING, UPPER … 1 … … … … … … … … B-18 29
6166488
P F … 1005-919-7273 PLATE, SCALE: ELEVATING SCREW, UPPER EA 2 * * 2 * * 2 24 10 B-18 30
11010242 (19204) W
P F … 5305-514-0612 SETSCREW: S, FIL-HD, NO. 3-48UNC-2 EA 1 * 2 2 * 2 2 24 10 B-18 31
X 3/8, LOCK, ELEVATING HANDWHEEL
5140612 (19204) W
P F … 5340-513-9995 PIN, STRAIGHT, HEADLESS: S, 0.128 EA 1 2 2 2 2 2 2 24 6 B-18 32
DIA X 3/32 LG, HANDWHEEL
5130005 (19204) W
P F … 1005-915-5615 SPRING, HELICAL, COMPRESSION: S, EA 1 2 2 2 2 2 2 24 6 B-18 33
BLK-OXIDE-FIN, 0.023 STK SIZE, 0.074 ID,
0.120 OD, 0.360 FEE O/A LG 7-1/2
COILS
11010523 (19204)
P F … 5315-915-8174 PIN, STRAIGHT, HEADLESS: S, PHOS- EA 1 2 2 3 2 2 3 36 8 B-18 34
FIN, 0.125 MAX DIA, 0.190 LG, 1 END CHIN,
1 END SQ
11010522 (19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 5315-051-8636 PIN, SPRING, TUBULAR SLOTTED: PHOS- EA 1 * 2 2 * 2 2 24 100 B-18 35
CTD, 3/32 NOM DIA, 9/16 LG
MS 16562-120 (96906) W
P F … 1005-518-9757 STOP, ELEVATING SCREW: LOWER, ASSY EA 1 2 2 2 2 2 2 24 6 B-18 36
5189757 (19204) W
X1 … … …………… SLEEVE: ELEVATING MECH … 1 … … … … … … … … B-18 37
6195549 W
X1 … … …………… PLUG: SLEEVE ELEVATING … 1 … … … … … … … … B-18 38
5140269 W
P D … 5320-050-5832 RIVET, SOLID: EYE-HD, S 5/16 EYE EA 1 … … … … … … 10
DIA, 1/4 SHK DIA, 1/2 SHK LG
505832 (19204) W
NOTE. ABOVE RIVET USED FOR ALTERNATE
METHOD OF ATTACHING CHAIN ASSEMBLY
TO YOKE.
HEAD AND LEG GROUPS
P O … 5315-903-3971 PIN, COTTER: S, PHOS-CTD, 1/8 DIA, EA 1 2 2 2 2 2 2 24 50 B-19 1
1-1/4 LG
MS 24665-834 (96906)
P O … 5310-513-9964 NUT, SLOTTED, HEXAGON: S, PINTLE BOLT EA 1 2 4 6 2 3 6 72 24 B-19 2
9/16-18NF-2, 25/64 THK
5139964 (19204)
P O … 5306-513-9973 BOLT, MACHINE: S, PHOS-CTD, HED-HD, EA 1 3 2 2 2 24 8 B-19 3
9/16-18UNF-2A, 3-11/32 LG
5139973 (19204) W
P F … 1005-555-9332 PINTLE, TRIPOD MOUNT: CAL. .30 EA 1 2 2 3 2 2 3 36 21 B-19 4
5559332 (19204) W
P F … 5310-011-5728 NUT, PLAIN, HEXAGON: S, PHOS-CTD, EA 4 2 2 3 2 2 3 36 20 B-19 5
1/4-28UNF-2B, 7/16W, 7/32 THK
115728 (19204) W
P F … 5306-516-9880 BOLT, MACHINE: S, HEX-HD, 1/4-28NF-2 EA 2 2 2 2 2 24 8 B-19 6
X 1, TRAVERSING BAR
5169880 (19204)
P F … 1005-555-9333 BAR ASSEMBLY, TRAVERSING: EA 1 2 2 3 2 2 3 36 10 B-19 7
5559333 (19204) W
P F … 5310-011-4942 NUT, PLAIN, HEXAGON: S, PHOS-CTD, HD 3 2 2 3 2 2 3 36 15 B-19 8
3/8-24UNF-2B, 9/16 W,21/64 THK
114942 (19204) W
P F … 5306-516-9879 BOLT, MACHINE: S, HEX-HD, 3/8-24NF-2 EA 1 2 2 2 2 24 8 B-19 9
X 1-3/4, FRONT LEG
5169879(19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 1005-610-8195 LEG: FRONT EA 1 * 2 2 * 2 2 24 4 B-19 10
6108195 (19204) W
P F … 5306-516-9882 BOLT, MACHINE: S, HEX-HD, 3/8-24NF-2 EA 2 * 2 2 * 2 2 24 8 B-19 11
X 1-2/2, REAR LEG
5169882 (19204)
P F R 1005-555-9337 LEG ASSEMBLY: REAR, RIGHT EA 1 * 2 2 * 2 2 24 4 B-19 12
5559337 (19204) W
P F … 5315-514-004 PIN, STRAIGHT, HEADLESS: S, SQ-ENDS, EA 1 * 2 2 * 2 2 24 6 B-19 13
0.184 MIN DIA, 0.186 MAX DIA
5140004 (19204) W
P F … 1005-513-9959 LATCH: SLEEVE EA 1 2 2 2 2 2 2 24 4 B-19 14
5139959 (19204) W
P F … 1005-513-9997 SPRING, HELICAL, COMPRESSION: S, EA 1 2 2 3 2 2 4 36 50 B-19 15
SLEEVE LOCK, 0.05 DIA STK, 0.300 OD, 9 COILS
513997 (19204) W
X1 … … …………… LEG GROUP: W … 1 … … … … … … … … B-19 16
P F … 1005-555-9338 LEG: REAR LEFT EA 1 * 2 2 * 2 2 24 4 B-19 17
5559338 (19204) W
P F … 5306-516-9881 BOLT, MACHINE: S, HEX-HD, 1/4-28NF-2 EA 2 2 2 * 2 2 24 8 B-19 18
X 1-3/8, TRIPOD HEAD
5160991 (19204)
P F … 1005-513-9962 SPACER, SLEEVE: S, TUBING, TRIPOD HEAD, EA 2 * 2 2 * 2 2 24 6 B-19 19
0.255 ID, 3/8 OD, 0.880 LG
5139962 (19204) W
P F … 5305-514-1950 SCREW, MACHINE: S, HEX-HD, EA 2 * 2 2 * 2 2 24 8 B-19 20
1/4-28UNF-2A X 1/2, PINTLE LOCK HOUSING
5141950 (19204) W
P F … 5310-550-1130 WASHER, LOCK: S, INT-TEETH, HD 2 2 2 3 2 2 3 36 12 B-19 21
PHOS-CTD, 1/4 SCREW SIZE
MS 35333-40 (96906) W
P F … 1005-610-8986 LOCK ASSEMBLY, PINTLE: EA 1 * 2 2 * 2 2 24 6 B-19 22
6108986 (19204) W
P F … 5315-050-5490 PIN, STRAIGHT, HEADLESS: CHAM, EA 1 * 2 2 * 2 2 24 6 B-19 23
PHOS-CTD, 1/8 X 7/8
505490 (19204) W
P F … 1005-514-1080 CAM, PINTLE LOCK RELEASE: EA 1 * 2 2 * 2 2 24 5 B-19 24
5141080 (19204) W
X1 … … …………… COLLAR, SHAFT: S, 0.327 ID, … 1 … … … … … … … … B-19 25
1/2 OD,
15/32 LG 5141081 W
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
P F … 1005-514-2877 SPRING, HELICAL, COMPRESSION: S, EA 2 2 2 3 2 2 3 36 15 B-19 26
PINTLE LOCK, 0.033 DIA STK, 0.2 OD,
13 COILS
5142877 (19204) W
X1 … … …………… BODY: PINTLE LOCK … 1 … … … … … … … … B-19 27
5141121 W
X1 … … …………… HOUSING: PINTLE LOCK … 1 … … … … … … … … B-19 28
6140648 W
P F … 5305-054-0896 SETSCREW: HDLS, FL-PT, CRES, EA 1 * 2 2 * 2 2 24 10 B-19 29
PASS-FIN, NO. 10-32NF-2A X 5/16
540896 (19204) W
P F … 1005-610-8201 BUSHING, PINTLE: EA 1 * 2 2 * 2 2 24 5 B-19 30
6108201 (19204) W
X1 … … …………… HEAD: TRIPOD … 1 … … … … … … … … B-19 31
5559331 W
BULK ISSUE ITEMS
P O … 9505-248-9849 WIRE, STEEL CARBON: CORROSION SL 1 * * * * * *
RESISTANT, 0.041 DIA, 5 LB SPOOL
MS 20996-F41 (96906) O
 Section VI. SPECIAL TOOLS, TEST AND SUPPORT EQUIPMENT
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
TOOLS AND EQUIPMENT AUTHORIZED
FOR UNIT REPLACEMENT
MACHINE GUNS, CALIBER .30:
M1919A4, M1919A6 AND M37
1005-288-3565 SWAB, SMALL ARMS CLEANING: PK … 2 2 3 2 2 3 36
COTTON, 2-1/2 SQ (1000 IN PK)
5019316 (19204)
1006-550-6573 CASE, SMALL ARMS CLEANING ROD: EA … * 2 2 * 2 2 24
CAL. .30, M1 5506673 (19204)
1005-555-9696 ENVELOPE: SPARE PARTS, M1, 4 X 3 EA … * 2 2 * 2 2 24
5559696 (19204) E
1005-556-4174 BRUSH, CLEANING, SMALL ARMS: BORE EA … 5 11 20 5 11 20 240
5564174 (19204)
1005-559-3026 COVER: SPARE BARREL EA … * 2 2 * 2 2 24
5593026 (19204) E
1005-650-7349 ROLL, ORDNANCE WEAPONS SPARE PARTS: EA … * 2 2 * 2 2 24 … B-20 1
M13
6507349 (19204)
1005-691-1381 BRUSH, CLEANING, SMALL ARMS: EA … 2 3 6 2 3 6 72
CHAMBER
7790582 (19204)
1005-694-1662 BUFFER, CLEANING ROD: EA … 2 3 6 2 3 6 72
7268275 (19204)
1005-714-8549 BOX, SPARE PARTS: EA … * 2 2 * 2 2 24
7148549 (19204) B
1005-714-8550 BOX, SPARE PARTS: EA … * 2 2 * 2 2 24
7148550 (19204) O
1005-726-6109 ROD SECTION, CLEANING, SMALL ARMS: EA … 3 6 11 3 6 11 132
7266109 (19204)
1005-726-6110 SWAB HOLDER SECTION, SMALL ARMS: EA … 2 3 6 2 3 6 72
CLEANING ROD: 7266110 (19204)
1005-793-6761 HANDLE ASSEMBLY: CLEANING ROD EA … 2 2 3 2 2 3 36
7266115 (19204)
1005-839-6662 COVER, MACHINE GUN: EA … * 2 2 * 2 2 24
11686598 (19204) B
R 4933-556-8334 WRENCH, COMBINATION: M6 EA … * 2 2 * 2 2 24 … B-27
5568334 (19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
4933-614-7277 WRENCH, SOCKET: BARREL BEARING EA … * 2 2 * 2 2 24 … B-20 2
PLUG, CAL. .30
6147277 (19204)
4933-652-9950 EXTRACTOR, RUPTURED CARTRIDGE CASE: EA … * 2 2 * 2 2 24
7790352 (19204)
TRIPOD MOUNT, M2
1005-659-1428 COVER, TRIPOD MOUNT: EA … * 2 2 * 2 2 24
6591428 (19204) W
SPECIAL TOOLS AND EQUIPMENT
THE FOLLOWING BASIC SMALL ARMS
DIRECT AND GENERAL SUPPORT MAINTENANCE
TOOL SET IS AUTHORIZED AS REQUIRED,
TO ALL MAINTENANCE SUPPORT UNITS
WITH A SMALL ARMS REPAIR MISSION.
R 4933-775-0366 TOOL SET, DIRECT AND GENERAL EA … * * * * * *
SUPPORT MAINTENANCE, BASIC
SMALL ARMS: 8426358 (19204)
NOTE. SEE SC 4933-95-CL-E04 FOR
COMPONENTS.
THE FOLLOWING TOOL SETS ARE
REQUISITIONED AND ISSUED TO
MAINTENANCE UNITS PERFORMING
DIRECT AND GENERAL SUPPORT, OR
DEPOT MAINENANCE, THE COMPLETE
SETS WILL BE REQUISITIONED AND
INDIVIDUAL TOOLS LISTED BELOW MAY
ALSO BE REQUISISITION UNDER THEIR
OWN STOCK NUMBER FOR REPLACEMENT
PURPOSES.
R 4933-999-4809 TOOL SET, DIRECT AND GENERAL SE * * * * * * *
SUPPORT MAINTENANCE: 5910795
(19204)
4933-077-2081 STOP TOOL, SCREW: UPPER ELEVATING EA 1 * * * * * * * … B-28
MECH, MT, TRIPOD
8436748 (19204)
4933-313-9485 KIT, BARREL EROSION GAGE, M8 EA 1 * * * * * * * … B-29
5910297 (19204)
COMPOSED OF:
5140-313-9486 CASE, CARRYING, GAGE, BARREL: EA 1 * * * * * * * … B-25 1
7319995 (19204)
4933-317-2504 GAGE, BARREL EROSION, CALIBER .30: EA 1 * * * * * * * … B-25 2
7319994 (19204)
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
4933-317-2501 GAGE, WEAR CHECK: EA 1 * * * * * * * … B-25 3
7274724 (19204)
4933-556-4343 GAGE, BREECH BORE: EA 1 * * * * * * * … B-21
5564343 (19204)
4933-556-8334 WRENCH, COMBINATION: M6 EA 3 * * * * * * * … B-27
5568334 (19204)
4933-710-6460 REAMER ASSEMBLY, CARBON REMOVING: EA 3 * * * * * * * … B-26
FRONT BBL BEARING
7106460 (19204)
4933-731-9928 GAGE, TIMING: 0.030 TO 0.120 EA 1 * * * * * * * … B-24
7319928 (19204)
4933-731-9929 GAGE, FIRING PIN PROTRUSION: EA 3 * * * * * * * … B-22
0.060 TO 0.068
7319929 (19204)
5140-473-6260 TOOL BOX, PORTABLE: METAL W/TRAY EA 1 * * * * * * * … B-29
9-13/16 H, 9-1/2 W, 21 LG
7540995 (19204)
5220-507-7203 GAGE, PLUG, PLAIN CLYLINDRICAL: FIRING EA 1 * * * * * * * … B-23
PIN HOLE
5077203 (19204)
R 4933-937-4028 TOOL SET, DEPOT MAINTENANCE: SE … … … … … … … … *
(FOR ALL CAL. .30 MACHINE GUNS AND
MOUNT)
8432557 (19204)
COMPOSED OF:
4933-631-5346 HOLDER ASSEMBLY, RIVET: BOTTOM EA 1 … … … … … … … *
PLATE
6315346 (19204)
4933-631-6037 EXPANDER ASSEMBLY: ADAPTER, EARS EA 2 … … … … … … … *
6316037 (19204)
4933-659-5341 ANVIL ASSEMBLY, ADJUSTABLE RIVETING: EA 1 … … … … … … … *
SPOTTING AND RIFETING, SIDE PLATE
6595341 (19204)
4933-710-6293 POST, ANVIL: S, 3/8-16NC-2 FEMALE EA 2 … … … … … … … *
THREAD ON ONE END, 5/64 INVERTED
RADIUS OF POINT, 4-1/2 OVERALL LENGTH
710-6293 (19204)
4933-710-6294 PEIN, RIVETING MACHINE: S, 3/8-20UNF-3A, EA 2 … … … … … … … *
LH THREAD ONE END, 1/8 INVERTED RADIUS OF
POINT 2-1/2 OVERALL LENGTH
7106294 (19204)
4933-710-6296 POST, ANVIL: S, 3/8-18NC-3 X 1-14 EA 2 … … … … … … … *
DEEP INTERNAL THREAD ONE END, ¾
 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Source Maint And Recov
Code

Depot maint. Alw.

1-yr alw per 100
30-day ds maint. 30-day gs maint.

Per 100 equip

equip cntgcy
Description Illustration
alw alw

Qty
(b)
Unit Inc (a) (b) (c) (a) (b) (c) (a) Fig.
Item
(a) (b) (c) Usable on of In 1- 21- 51- 1- 21- 51- No.
No.
Source Maint Recov Federal Stock No. Reference Number & Mfr Code Code Meas unit 20 50 100 20 50 100
END OUTSIDE DIAMETER, 5 OVERAL LENGTH
7106296 (19204)
4933-710-6300 PEIN, RIVETING MACHINE: S, 3/8-20UNF-3A, EA 2 … … … … … … … *
LH THREAD ONE END, 3/16 INVERTED
RADIUS OF POINT, 2-1/2 OVERALL
LENGTH 7106300 (19204)
5120-710-6302 PEIN: S, 3/8-20UNF-3A, LH THREAD, EA 2 … … … … … … … *
¾ BODY OUTSIDE DIAMETER FLAT ON
TWO SIDES TO 5/8 OUTSIDE DIAMETER,
¼ INVERTED RADIUS OF POINT,
2-3/4 OVERALL LENGTH
7106302 (19204)
4933-710-6303 PEIN, RIVETING, MACHINE: S, EA 2 … … … … … … … *
3/8-20UNF-3A, LH THREAD ONE END,
5/16 INVERTED RADIUS OF POINT,
2-3/4 OVERALL LENGTH
7106303 (19204)
4933-710-6304 PEIN, RIVETING MACHINE: S, EA 2 … … … … … … … *
3/8-20UNF-3A, LH, 2-1/2 OVERALL
LENGTH
7106304 (19204)
4933-710-6311 ANVIL, RIVETING: 5, W, 3-3/8 H, EA 1 … … … … … … … *
7-3/4 LG 7106311 (19204)
4933-710-6327 POST, ANVIL: S, 3/8-16NC-3 X EA 2 … … … … … … … *
1-1/4 DEEP INTERNAL THREAD ONE END,
3/4 END OUTSIDE DIAMETER, 15/32
DIAMETER SPHERICAL RECESS ON
OTHER END, 4-1/2 OVERALL LENGTH
7106327 (19204)
4933-710-6331 ANVIL ASSEMBLY, RIVETING: EA 1 … … … … … … … *
7106331 (19204)
4933-710-6332 ANVIL ASSEMBLY, RIVETING: EA 1 … … … … … … … *
7106332 (19204)
4933-731-9922 GAGE, SNAP WIDTH: BOTTOM PLATE EARS EA 2 … … … … … … … *
7319922 (19204)
5140-473-6260 TOOL BOX, PORTABLE: METAL W/TRAY, EA 1 … … … … … … … * B-29
9-13/16 H, 9-1/2 W, 21 LG
7540995 (19204)
 Figure B-1. Caliber .30 Machine Guns, M1919A4, and M1919A6 – major groups and
Assemblies – partial exploded view.
TM 9-1005-212-25

73
TM 9-1005-212-25

Figure b-2. Caliber .30 Machine Gun, M37 – major groups and assemblies – partial
exploded view.

74
 TM 9-1005-212-25

Figure B-3. Shoulder gun stock group – exploded view.

Figure B-4. Back plate assembly for Caliber .30 Machine Guns, M1919A4 and
M1919A6 only – exploded view.

75
TM 9-1005-212-25

Figure B-5. Back plate assembly for Caliber .30 Machine Gun, M37 only – exploded view.

76
 TM 9-1005-212-25

77
Figure B-6. Bolt group for Caliber .30 Machine Guns, M1919A4 and M1919A6 only-
Exploded view.
78
TM 9-1005-212-25

Figure B-7. Driving spring assembly and bolt group for Caliber .30 Machine Gun,
M37 only – exploded view.
 TM 9-1005-212-25

Figure B-8. Lock frame group – exploded view.

Figure B-9. Barrel extension group – exploded view.

79
TM 9-1005-212-25

Figure B-10. Cover group for Caliber .30 Machine Guns, M1919A4 and M1919A6
only – exploded view.

Figure B-11. Cover group for Caliber .30 Machine Gun, M37 only – exploded view.

80
 TM 9-1005-212-25

Figure B-12. Bipod assembly – Caliber .30 Machine Gun, M1919A6 only – exploded view.

Figure B-13. Carrying handle assembly – Caliber .30 Machine Guns, M1919A4 and
M1919A6 only – exploded view.

81
82
TM 9-1005-212-25

Figure B-14. Casing and barrel jacket group for Caliber .30 Machine Guns, M1919A4
And M1919A6 only – exploded view.
 Figure B-15. Casing and barrel jacket group for Caliber .30 Machine Gun, M37
Only – exploded view.
TM 9-1005-212-25

83
TM 9-1005-212-25

Figure B-16. Front sight assembly – exploded view. Figure B-17. Retracting bar group for Caliber .30
Machine Gun, M37 only – exploded view.

84
 TM 9-1005-212-25

Figure B-18. Traversing and elevating mechanism assembly for Machine Gun Tripod
Mount, M2 – exploded view.

85
86
TM 9-1005-212-25

Figure B-19. Head and leg group Machine Gun Tripod Mount, M2, - exploded
View.
 TM 9-1005-212-25

Figure B-22. Firing pin protrusion gage 7319929.

Figure B-20. Roll 6507349 and wrench 6147277 for

organizational maintenance.
Figure B-23. Plain cylindrical plug gage 5077203.

Figure B-24. Timing gage 731928.

Figure B-21. Breech bore gage 5564343

87
TM 9-1005-212-25

Figure B-25. Barrel erosion gage kit, M8, 5910297.

88
 TM 9-1005-212-25

Figure B-26. Carbon removing reamer assembly 7106460.

Figure B-27. Combination Wrench, M6, 5568334.

Figure B-28. Screw stop tool 3436748.

89
TM 9-1005-212-25

Figure B-29. Portable tool box 7540995.

90
 TM 9-1005-212-25
Section VII. INDEX – FEDERAL STOCK NUMBER AND REFERENCE
NUMBER CROSS-REFERENCE TO FIGURE AND ITEM NUMBER

Stock Fig. Item Stock Fig. Item Stock Fig. Item

Number No. No. Number No. No. Number No. No.
1005-015-2974 B-5 12 1005-550-9801 B-10 13 1005-615-3375 B-18 10
1005-021-2430 B-5 11 1005-554-5964 B-14 6 1005-620-0952 B-12 8
1005-092-8972 B-16 25 B-15 6 1005-621-2654 B-6 17
1005-096-3222 B-7 7 1005-555-9332 B-19 4 1005-626-1101 B-6 4
1005-209-8490 B-6 5 1005-555-9333 B-19 7 1005-628-4541 B-3 1
1005-209-8491 B-6 13 1005-555-9337 B-19 12 1005-650-7349 B-20 1
B-7 19 1005-555-9338 B-19 17 1005-710-0059 B-1 2
1005-209-8496 B-4 3 1005-556-2503 B-14 15 1005-710-6949 B-14 17
B-5 3 B-15 28 1005-714-2261 B-16 11
1005-209-8680 B-16 10 1005-556-4133 B-14 19 1005-714-8399 B-1 7
1005-209-8681 B-1 13 B-15 24 B-2 8
1005-305-0725 B-18 6 1005-556-4137 B-6 9 1005-714-8400 B-1 8
1005-342-1100 B-8 7 B-7 15 1005-716-0455 B-14 16
1005-347-4264 B-2 1 1005-556-4142 B-8 2 1005-716-2160 B-1 22
1005-391-1336 B-1 18 1005-557-4620 B-18 1 1005-716-2248 B-14 20
1005-500-9374 B-4 4 1005-559-4543 B-3 2 1005-716-2303 B-1 19
B-5 4 1005-562-1076 B-6 1 1005-718-4158 B-9 2
1005-501-3154 B-14 4 1005-562-1092 B-12 9 1005-718-5915 B-17 7
B-15 4 1005-588-3490 B-18 13 1005-718-8612 B-7 2
1005-501-3155 B-14 3 1005-597-0429 B-10 10 1005-718-8614 B-17 3
B-15 3 1005-600-8809 B-14 2 1005-718-8616 B-5 7
1005-501-3441 B-11 6 B-15 2 1005-718-8617 B-5 5
1005-502-0541 B-17 4 1005-600-8822 B-1 12 1005-718-8618 B-11 15
1005-502-0581 B-4 5 1005-600-8823 B-1 11 1005-718-8623 B-5 14
1005-513-2430 B-14 8 1005-601-7469 B-14 32 1005-718-8625 B-11 21
1005-513-5057 B-8 4 1005-601-7497 B-6 3 1005-718-8634 B-7 22
1005-513-5296 B-11 5 1005-601-7503 B-10 7 1005-718-8642 B-11 13
1005-513-5297 B-11 8 1005-601-7513 B-10 12 1005-718-8643 B-11 19
1005-513-5303 B-7 8 B-11 11 1005-718-8655 B-15 20
1005-513-5305 B-7 11 1005-602-2106 B-15 15 1005-718-8657 B-17 6
1005-513-9959 B-19 14 1005-606-8416 B-7 6 1005-718-8658 B-5 15
1005-513-9962 B-19 19 1005-606-9674 B-5 6 1005-718-8664 B-7 10
1005-513-9969 B-4 8 1005-610-8195 B-19 10 1005-718-8666 B-11 17
1005-513-9988 B-18 5 1005-610-8201 B-19 30 1005-718-8668 B-5 8
1005-513-9994 B-18 26 1005-610-8211 B-18 27 1005-718-8669 B-5 13
1005-513-9997 B-19 15 1005-610-8986 B-19 22 1005-718-8670 B-15 18
1005-514-0485 B-18 24 1005-613-1251 B-8 3 1005-718-8671 B-17 2
1005-514-1080 B-19 24 1005-613-1253 B-8 1 1005-718-8674 B-11 3
1005-514-1460 B-18 20 B-9 1 1005-718-8679 B-2 2
1005-514-2877 B-19 26 1005-613-1255 B-10 8 1005-718-8681 B-7 5
1005-515-2429 B-14 5 1005-613-1258 B-14 26 1005-718-8684 B-7 23
B-15 5 1005-613-1262 B-10 11 1005-718-8685 B-2 4
1005-515-2430 B-15 8 1005-513-1265 B-6 10 1005-718-8690 B-9 4
1005-515-7374 B-10 6 B-7 16 1005-718-8693 B-15 22
1005-515-9870 B-14 11 1005-613-1317 B-6 8 1005-718-8694 B-15 36
B-15 11 B-7 14 1005-718-8701 B-15 21
1005-517-0491 B-1 17 1005-613-4059 B-4 1 1005-718-8774 B-15 17
B-15 26 B-5 1 1005-718-8776 B-7 4
1005-517-1492 B-18 15 1005-613-4155 B-11 9 1005-718-8777 B-11 10
1005-517-1495 B-18 12 1005-614-7093 B-14 29 1005-719-1544 B-7 3
1005-517-4192 B-18 8 1005-614-7212 B-1 3 1005-726-6108 B-14 9
1005-518-9757 B-18 36 1005-614-7216 B-14 23 B-15 9
1005-519-4313 B-18 4 1005-614-7217 B-14 22 1005-731-2235 B-12 3
1005-519-6284 B-10 4 1005-614-7222 B-6 15 1005-731-2236 B-12 5
1005-550-8452 B-14 31 1005-614-7225 B-14 24 1005-731-2237 B-12 6
1005-550-8461 B-10 9 B-15 19 1005-731-2238 B-12 4
1005-550-9182 B-8 8 1005-614-7230 B-9 3 1005-731-2973 B-1 23
1005-550-9186 B-6 11 1005-614-7231 B-8 6 1005-731-3098 B-13 6
B-7 17 1005-614-7299 B-6 18 1005-738-2247 B-17 8

91
TM 9-1005-212-25

Stock Fig. Item Stock Fig. Item Stock Fig. Item

Number No. No. Number No. No. Number No. No.
1005-738-2248 B-15 31 5310-011-8774 B-12 2 B-15 39
1005-738-2249 B-15 32 5310-012-5016 B-1 10 5320-515-2737 B-14 33
1005-840-1861 B-15 35 5310-012-5754 B-18 3 B-15 38
1005-840-1975 B-16 5 5310-013-8544 B-10 5 5320-516-0656 B-14 37
1005-840-1976 B-16 4 5310-061-7325 B-18 7 5340-513-9995 B-18 32
1005-840-1977 B-16 7 5310-274-8710 B-13 5 5340-517-4113 B-18 19
1005-840-1979 B-16 6 5310-274-8714 B-13 2 5340-716-2161 B-1 20
1005-840-1980 B-16 2 5310-513-9964 B-19 2 5355-513-9982 B-18 28
1005-840-3848 B-11 7 5310-550-0286 B-4 7
1005-840-7222 B-15 16 5310-550-1130 B-19 21
1005-840-7224 B-11 14 5310-579-079 B-10 2
1005-840-8768 B-18 23 5310-655-9659 B-13 1
1005-903-7216 B-1 16 5310-935-3750 B-18 9
1005-915-5615 B-18 11 5315-050-5490 B-19 23
1005-915-5616 B-18 33 5315-051-8636 B-18 35
1005-919-7273 B-18 30 5315-234-1854 B-1 9
1005-964-9390 B-14 21 5315-502-0498 B-6 12
4030-262-1571 B-18 21 B-7 18
4730-517-1491 B-18 14 5315-502-0503 B-8 5
4730-718-8654 B-17 5 5315-502-0567 B-6 7
4933-077-2081 B-18 - B-7 13
4933-313-9485 B-29 - 5315-502-0570 B-6 2
4933-317-2501 B-25 3 5315-513-5052 B-4 2
4933-317-2504 B-25 2 B-5 2
4933-556-4343 B-21 - 5315-513-5246 B-7 9
4933-556-8334 B-27 4 5315-513-5259 B-11 4
B-21 4 5315-514-004 B-19 13
B-31 - 5315-515-6881 B-16 9
4933-614-7277 B-20 2 5315-515-7434 B-10 3
4933-710-6460 B-26 - 5315-516-2810 B-14 10
4933-731-9928 B-24 - B-15 10
4933-731-9929 B-22 - 5315-597-4297 B-15 14
5140-313-9486 B-25 1 5315-616-5517 B-18 17
5140-473-6260 B-29 - 5315-687-3788 B-11 1
5220-507-7203 B-23 - 5315-718-8615 B-17 1
5305-013-3617 B-14 14 5315-718-8622 B-7 1
B-15 27 5315-718-8632 B-2 3
5305-054-0896 B-19 29 5315-718-8649 B-5 10
5305-068-0502 B-13 3 5315-718-8650 B-2 10
5305-313-9434 B-15 30 5315-718-8661 B-5 9
5305-501-3167 B-14 7 5315-719-1238 B-11 2
B-15 7 5315-815-1405 B-2 9
5305-501-3258 B-14 12 B-11 12
B-15 12 5315-833-3753 B-7 21
5305-502-0527 B-14 18 5315-840-1923 B-16 3
B-15 23 5315-845-4231 B-14 1
5305-513-9989 B-18 2 B-15 1
5305-514-0612 B-18 31 5315-903-3971 B-19 1
5305-514-1950 B-19 20 5315-915-8174 B-18 34
5305-515-2774 B-12 1 5320-502-0509 B-14 38
5305-558-3689 B-10 1 B-15 42
5305-600-8824 B-1 14 5320-502-0514 B-14 30
5305-731-2900 B-13 4 B-15 34
5305-774-9614 B-4 6 5320-502-0522 B-14 35
5306-143-3287 B-12 7 B-15 41
5306-513-9973 B-19 3 5320-502-0589 B-14 25
5306-515-6884 B-16 1 5320-502-0600 B-14 28
5306-516-9879 B-19 9 B-15 43
5306-516-9880 B-19 6 5320-502-0601 B-14 36
5306-516-9881 B-19 18 B-15 37
5306-316-9882 B-19 11 5320-502-0711 B-14 34
5310-011-4942 B-19 8 B-15 40
5310-011-5728 B-19 5 5320-502-4602 B-14 27

92
 TM 9-1005-212-25

Mfg Item Mfg Item

Reference Number Figure No. Reference Number Figure No.
Code No. Code No.
MS 9048-072 96906 B-11 1 5020589 19204 B-14 25
MS 16562-120 96906 B-18 35 5020600 19204 B-14 28
MS 16562-136 96906 B-7 21 B-15 43
MS 21045-4 96906 B-18 7 5020601 19204 B-14 36
MS 24665-151 96906 B-2 9 B-15 37
B-11 12 5020711 19204 B-14 34
MS 24065-153 96906 B-1 9 B-15 40
MS 24665-834 96906 B-19 1 5024602 19204 B-14 27
MS 35244-68 96906 B-14 14 B-15 39
B-15 27 5077203 19204 B-23 -
MS 35333-37 96906 B-10 2 5315052 19204 B-4 2
MS 35333-40 96906 B-19 21 19204 B-5 2
MS 35333-59 96906 B-10 5 5135053 B-4 3
MS 35336-15 96906 B-4 7 19204 B-5 3
MS 35337-63 96906 B-13 2 5135057 19204 B-8 4
MS 35338-62 96906 B-13 5 5135246 19204 B-7 9
MS 35690-403 96906 B-13 1 5135259 19204 B-11 4
MS 35756-2 96906 B-18 17 5135296 19204 B-11 5
MS 39086-56 96906 B-14 1 5135297 19204 B-11 8
B-15 1 5135303 19204 B-7 8
MS 51108-29 96906 B-12 7 5135304 19204 B-7 11
MS 51943-4 96906 B-18 9 5139959 19204 B-19 14
MS 51960-47 96906 B-4 6 5139962 19204 B-19 19
MS 90725-6 96906 B-13 3 5139964 19204 B-19 2
114942 19204 B-19 8 5139969 19204 B-4 8
115728 19204 B-19 5 5139973 19204 B-19 3
118774 19204 B-12 2 5139982 19204 B-18 28
125016 19204 B-1 10 5139988 19204 B-18 5
125754 19204 B-18 3 5139989 19204 B-18 2
505490 19207 B-19 23 5139994 19204 B-18 26
585900 19205 B-15 14 5139995 19204 B-18 32
540896 19204 B-19 29 5139997 19204 B-19 15
5009374 19204 B-4 4 5140004 19204 B-19 13
B-5 4 5140269 - B-18 38
5013154 19204 B-14 4 5140485 19204 B-18 24
B-15 4 5140612 19204 B-18 31
5013155 19204 B-14 3 5141080 19204 B-19 24
B-15 3 5141460 19204 B-18 20
5013167 19204 B-14 7 5141950 19204 B-19 20
B-15 7 5142887 19204 B-19 26
5013258 19204 B-14 12 5152429 19204 B-14 5
B-15 12 B-15 5
5013441 19204 B-11 6 5152430 19204 B-14 8
5020498 19204 B-6 12 B-15 8
B-7 18 5152737 19204 B-14 33
5020503 19204 B-8 5 B-15 38
5020509 19204 B-14 38 5152774 19204 B-12 1
B-15 42 5156881 19204 B-16 9
5020514 19204 B-14 30 5156882 19204 B-16 10
B-15 34 5156884 19204 B-16 1
5020522 19204 B-14 35 5157374 19204 B-10 6
B-15 41 5157434 19204 B-10 3
5020527 19204 B-14 18 5159870 19204 B-14 11
B-15 23 B-15 11
5020541 19204 B-17 4 5160656 19204 B-14 37
5020567 19204 B-6 7 5162810 19204 B-14 10
B-7 13 B-15 10
5020570 19204 B-6 2 5169879 19204 B-15 9
5020581 19204 B-4 5 5169880 19204 B-19 6

93
TM 9-1005-212-25

Mfg Item Mfg Item

Reference Number Figure No. Reference Number Figure No.
Code No. Code No.
5169881 19204 B-19 18 6131253 19204 B-8 1
5169882 19204 B-19 11 B-9 1
5170491 19204 B-1 17 6131255 19204 B-10 8
B-15 26 6131258 19204 B-14 26
5171491 19204 B-18 14 6131262 19204 B-10 11
5171492 19204 B-18 15 6131265 19204 B-6 10
5171495 19204 B-18 12 B-7 16
5174113 19204 B-18 19 6131317 19204 B-6 8
5174175 19204 B-18 13 B-7 14
5174192 19204 B-18 8 6134059 19204 B-4 1
5189757 19204 B-18 36 B-5 1
5194313 19204 B-18 4 5134155 19204 B-11 9
5196283 19204 B-10 1 6147093 19204 B-14 29
5196284 19204 B-10 4 6147212 19204 B-1 3
5508452 19204 B-14 31 6147216 19204 B-14 23
5508461 19204 B-10 9 6147217 19204 B-14 22
5508462 B-6 14 6147222 19204 B-6 15
B-7 20 6147224 19204 B-10 10
5509182 19204 B-8 8 6147225 19204 B-14 24
5509186 19204 B-6 11 B-15 19
B-7 17 6147228 19204 B-6 5
5509801 19204 B-10 13 6147229 19204 B-6 13
5545964 19204 B-14 6 B-7 19
B-15 6 6147230 19204 B-9 3
5559332 19204 B-19 4 6147231 19204 B-8 6
5559333 19204 B-19 7 6147277 19204 B-20 2
5559337 19204 B-19 12 6147299 19204 B-6 18
5559338 19204 B-19 17 6158375 19204 B-18 10
5559696 19204 B-20 5 6166488 - B-18 29
B-21 5 6166489 - B-18 18
5562503 19204 B-14 15 6166490 - B-18 16
B-15 28 6195549 - B-18 37
5564133 19204 B-14 19 6200952 19204 B-12 8
B-15 24 6212654 19204 B-6 17
5564137 19204 B-6 9 6261101 19204 B-6 4
B-7 15 6284541 19204 B-3 1
5564142 19204 B-8 2 6507349 19204 B-20 1
5564343 19204 B-21 - 653538 - B-14 40
5568334 19204 B-27 - 6544087 - B-6 6
5574620 19204 B-18 1 7100059 19204 B-1 2
5594543 19204 B-3 2 7106460 19204 B-26 -
5621076 19204 B-6 1 7106949 19204 B-14 17
5621092 19204 B-12 9 7114037 - B-14 39
5653469 - B-4 9 7122102 - B-18 22
5910297 19204 B-29 - 7142261 19204 B-16 11
6008809 19204 B-14 2 7148399 19204 B-1 7
B-15 2 B-2 8
6008822 19204 B-1 12 7148400 19204 B-1 8
6008823 19204 B-1 11 7148442 - B-1 21
6008824 19204 B-1 14 7160455 19204 B-14 16
6008825 19204 B-1 13 7162160 19204 B-1 22
6017469 19204 B-14 32 7162161 19204 B-1 20
6017497 19204 B-6 3 7162248 19204 B-14 20
6017503 19204 B-10 7 7162300 19204 B-1 16
6017509 - B-6 16 7162303 19204 B-1 19
6017513 19204 B-10 12 7184158 19204 B-9 2
B-11 11 7185915 19204 B-17 7
6108195 19204 B-19 10 7188612 19204 B-7 2
6108201 19204 B-19 30 7188614 19204 B-17 3
6108210 - B-18 25 7188615 19204 B-17 1
6108211 19204 B-18 27 7188616 19204 B-5 7
6108986 19204 B-18 22 7188617 19204 B-5 5
6131251 19204 B-8 3 7188618 19204 B-11 15

94
 TM 9-1005-212-25

Mfg Item Mfg Item

Reference Number Figure No. Reference Number Figure No.
Code No. Code No.
7188621 - B-11 20 7312238 19204 B-12 4
7188622 19204 B-7 1 7312900 19204 B-13 4
7188623 19204 B-5 14 7312973 19204 B-1 23
7188625 19204 B-11 21 7312977 - B-13 7
7188632 19204 B-2 3 7313098 19204 B-13 6
7188640 - B-11 16 7319928 19204 B-24 -
7188634 19204 B-7 22 7319929 19204 B-22 -
7188635 - B-11 18 7319994 19204 B-25 2
7188642 19204 B-11 13 7319995 19204 B-25 1
7188643 19204 B-11 19 7540995 19204 B-29 -
7188649 19204 B-5 10 7791622 19204 B-14 21
7188650 19204 B-2 10 8401861 19204 B-15 35
7188654 19204 B-17 5 8401923 19204 B-16 3
7188655 19204 B-15 20 8401976 19204 B-16 4
7188657 19204 B-17 6 8401977 19204 B-16 7
7188658 19204 B-5 15 8401978 - B-16 8
7188661 19204 B-5 9 8401979 19204 B-16 6
7188664 19204 B-7 10 8401980 19204 B-16 2
7188666 19204 B-11 17 8403948 19204 B-11 7
7188668 19204 B-5 8 8407222 19204 B-15 16
7188669 19204 B-5 13 8407223 19204 B-15 15
7188670 19204 B-15 18 8407224 19204 B-11 14
7188671 19204 B-17 2 8407226 - B-11 22
7188674 19204 B-11 3 8407769 19204 B-8 7
7188679 19204 B-2 2 8407780 19204 B-2 1
7188681 19204 B-7 5 8407786 19204 B-5 12
7188683 - B-5 16 8408768 19204 B-18 23
7188684 19204 B-7 23 8410172 19204 B-1 18
7188685 19204 B-2 4 8410907 19204 B-5 6
7188690 19204 B-9 4 8412118 19204 B-15 25
7188693 19204 B-15 22 8412270 19204 B-7 7
7188694 19204 B-15 36 8412295 19204 B-18 6
7188701 19204 B-15 21 8413954 19204 B-7 6
7188709 - B-7 12 8414731 19204 B-17 8
7188774 19204 B-15 17 8414732 19204 B-15 31
7188776 19204 B-7 4 8414733 19204 B-15 32
7188777 19204 B-11 10 8414735 - B-15 44
7191238 19204 B-11 2 8414823 19204 B-15 30
7191544 19204 B-7 3 8436748 19204 B-28 -
7266108 19204 B-14 9 11010242 19204 B-18 30
B-15 9 11010522 19204 B-18 34
7274724 19204 B-25 3 11010523 19204 B-18 33
7312235 19204 B-12 3 11010547 19204 B-18 11
7312236 19204 B-12 5 11686454 19204 B-5 11
7312237 19204 B-12 6

95
TM 9-1005-212-25

96
 TM 9-1005-212-25
APPENDIX C

MAINTENANCE ALLOCATION CHART

Section I. INTRODUCTION

C-1. General return an item to like new, zero mileage, or zero

The maintenance allocation chart indicates specific hour operation.
maintenance operations performed at the proper k. Rebuild. The highest degree of material
maintenance levels. Deviation from maintenance maintenance. It consists of restoring equipment as
operations allocated in the cart is authorized only nearly as possible to new condition in accordance
upon approval of the Commanding Officer. with original manufacturing standards. Rebuild is
performed only when required by operational
C-2. Maintenance Functions considerations or other paramount factors and then
only at the depot maintenance category. Rebuild
The maintenance allocation chart designates reduces to zero the hour or miles the equipment, or
overall responsibility for the maintenance function of component thereof, has been in use.
an end item or assembly. Maintenance functions will l. Symbols. The uppercase letter placed n the
be limited to and defined as follows: appropriate column indicates the lowest level at
which that particular maintenance function is to be
a. Inspect. To determine serviceability of an item performed.
by comparing its physical, mechanical and electrical
characteristics with established standards. C-3. Explanation of Format
b. Test. To verify serviceability and to detect
electrical or mechanical failure by use of test The purpose and use of the format are as follows:
equipment.
c. Service. To clean, to preserve, to charge, and to a. Column 1, Group Number. Column 1 lists group
add fuel, lubricants, cooling agents and air. numbers the purpose of which is to identify
d. Adjust. To rectify to the extent necessary to components, assemblies, subassemblies and
bring into proper operating range. modules with the next higher assembly.
e. Align. To adjust specified variable elements of b. Column 2, Functional Group. Column 2 lists the
an item to bring to optimum performance. noun names of components, assemblies,
f. Calibrate. To determine the corrections to be subassemblies and modules on which maintenance is
made in the readings of instruments or test authorized.
equipment used in precise measurement. Consists of c. Column 3, Maintenance Functions. Lists the
the comparison of two instruments, one of which is various categories of maintenance to be performed
certified standard of known accuracy, to detect and on the weapon.
adjust any discrepancy in the accuracy of the d. Use of symbols. Explanation of the use of codes
instrument being compared with the certified in maintenance column 3 as follows:
standard.
g. Install. To set up for use in an operational Code Explanation
environment such as emplacement, site or vehicle.
h. Replace. To replace unserviceable items with C Operator/crew
serviceable assemblies, subassemblies, or parts. O Organizational Maintenance
i. Repair. Those maintenance operations necessary F Direct support maintenance
to restore an item to serviceable condition through H General support maintenance
correction of material damage or a specific failure. D Depot maintenance.
Repair may be accomplished at each category of
maintenance. e. Column 4, Tools and Equipment. This column
j. Overhaul. Normally, the highest degree of shall be used to specify, by code, those tools and
maintenance performed by the Army in order to test equipment required to perform the designated
minimize time work in process is consistent with function.
quality and economy of operation. It consists of that f. Column 5, Remarks. Self-explanatory.
maintenance necessary to restore an item to
completely serviceable condition as prescribed by
Note. Columns not utilized in this maintenance
maintenance standards in technical publications for
allocation chart are considered not applicable to this
each item of equipment. Overhaul normally does not equipment.

97
TM 9-1005-212-25

Section II. MAINTENANCE ALLOCATION CHART FOR MACHINE

GUNS CALIBER .30, M1919A4, M1919A6 AND M37 AND

MACHINE GUN TRIPOD MOUNT, M2

(1) (2) (3) (4) (5)

Maintenance function

Equipment
Group No.

Tools and
Overhaul
Functional

Calibrate

Remarks
Replace

Rebuild
Inspect

Service
group

Repair
Adjust

Install
Align
Test
MACHINE GUNS, CAL .30 M1919A4, C
M1919A6 AND M37
SHOULDER GUN STOCK GROUP C -- C -- -- -- C -- F D --
(M1919A6 ONLY)
BACK PLATE ASSEMBLY C -- C -- -- -- C F F D --
BACK PLATE ASSEMBLY (M37 ONLY) C -- C -- -- -- C O F D --
BOLT GROUP C -- C -- -- -- C -- O D --
DRIVING SPRING ASSEMBLY AND C -- C -- -- -- C C O D --
BOLT GROUP (M37 ONLY)
LOCK FRAME GROUP C -- C -- -- -- C -- O D --
BARREL EXTENSION GROUP C -- C -- -- -- C -- O D --
BARREL/BARREL ASSEMBLY C -- C -- -- -- C C -- D --
COVER GROUP C -- C -- -- -- F -- O D --
FLASH HIDER GROUP (M1919A4 C -- C -- -- -- O -- F D --
ONLY)
FLASH HIDER GROUP (M1919A6 C -- C -- -- -- C -- F D --
ONLY)
BIPOD ASEMBLY (M1919A6 ONLY) C -- C -- -- -- -- -- O D --
CARRYING HANDLE ASSEMBLY C -- C -- -- -- C -- F D --
(M1919A4 AND M1919A6 ONLY)
CASING AND BARREL JACKET C -- C -- -- -- C O F -- --
GROUP
MOUNT, TRIPOD, MACHINE GUN,
M2
TRAVERSING AND ELEVATING C -- C -- -- -- C -- O D --
MECHANISM ASSEMBLY
HEAD AND LEG GROUP C -- C -- -- -- O -- O D --

98
 TM 9-1005-212-25

By Order of the Secretary of the Army:

W.C. WESTMORELAND,
General, United States Army,
Chief of Staff.

Official:

KENNETH G. WICKHAM,
Major General, United States Army,
The Adjutant General.

Distribution:

To be distributed in accordance with DA Form 12-40, organizational maintenance requirements for Machine
Guns, Caliber .30, M37, M1919A4, M1919A6 and Tripod Mounts.

99