<TITLE OF THE PROJECT>

MINI PROJECT REPORT

Submitted by
<Font Size 14><Italic>

NAME OF THE STUDENT (Reg.No.)

NAME OF THE STUDENT (Reg.No.)
NAME OF THE STUDENT (Reg.No.)
NAME OF THE STUDENT (Reg.No.)

in partial fulfillment for the award of

the degree of
<Font Size 14><1.5 line spacing><Italic>

BACHELOR OF TECHNOLOGY
<Font Size 16>
in

INFORMATION TECHNOLOGY
<Font Size 14>

AMAL JYOTHI COLLEGE OF ENGINEERING

KANJIRAPPALLY

JULY 2022
 DEPARTMENT OF INFORMATION TECHNOLOGY

AMAL JYOTHI COLLEGE OF ENGINEERING, KANJIRAPALLY

DECLARATION

We undersigned hereby declare that the project report

“………………………………………………………”, submitted for partial fulfillment of
the requirements for the award of degree of Bachelor of Technology of the APJ Abdul Kalam
Technological University, Kerala is a bonafide work done by us under supervision of Ms.
Midhuna Jyothi R. This submission represents our ideas in our own words and where ideas
or words of others have been included, we have adequately and accurately cited and
referenced the original sources. We also declare that we have adhered to ethics of academic
honesty and integrity and have not misrepresented or fabricated any data or idea or fact or
source in our submission. We understand that any violation of the above will be a cause for
disciplinary action by the institute and/or the University and can also evoke penal action from
the sources which have thus not been properly cited or from whom proper permission has not
been obtained. This report has not been previously formed the basis for the award of any
degree, diploma or similar title of any other University.

Name of students:
 DEPARTMENT OF INFORMATION TECHNOLOGY
AMAL JYOTHI COLLEGE OF ENGINEERING, KANJIRAPALLY

BONAFIDE CERTIFICATE

This is to certify that the project report entitled “………………………………

…………………….………………………………………………………………..
……………..” is a bonafide record of the mini project work carried out by NAME1
(REG.NO.), NAME2 (REG.NO.), NAME3 (REG.NO.) and NAME4 (REG.NO.), during
the academic year 2021 -2022 in partial fulfillment of the requirements for the award of the
Degree of Bachelor of Technology in Information Technology by APJ Abdul Kalam
Technological University. Certified further that the work reported herein does not form part
of any other thesis or dissertation submitted to any other University or Institute for any
purpose.

Ms. MIDHUNA JYOTHI R. Dr. SHIJU GEORGE

Project Guide & Project Coordinator Head of the

Department

Submitted for Mini-Project External examination held on _________

iii
 INTERNAL EXAMINER EXTERNAL
EXAMINER

ACKNOWLEDGEMENT

First of all, we submit all glory and honour to GOD ALMIGHTY for his eternal love
and protection throughout the project. The tremendous amount of help that we
received from a number of people gave us the incentive to complete this project to the
best of our capability.

Rev. Dr. Mathew Paikatt, Manager, Amal Jyothi College of Engineering,

Kanjirappally, Dr. Lillykutty Jacob, Principal, Amal Jyothi College of Engineering,
Kanjirappally, and our Head of the Department Dr. Shiju George

Ms. Midhuna Jyothi R, our Project Guide

Lab staffs
Last but not the least we thank sincerely all our parents and our good friends who
gave us all the help in times of trouble.

iv
 ABSTRACT

v
 CONTENTS

TITLE PAGE NO

1.INTRODUCTION 1
1.1General Background 1
1.2Motivation 1
1.3Overview of the report 1
1.4Proposed system 2
1.5Objectives 2
1.6Significance of the system 2

2. LITERATURE REVIEW 4

3. SYSTEM REQUIREMENTS AND DESIGN OVERVIEW 8

3.1 Functional Requirements 8
3.2 System Design 8

4. METHODOLOGY 10
4.1 10
4.2 10
4.3 11
4.4 11
4.5 11

5.IMPLEMENTATION 12
5.1
5.1.1
5.2
5.2.1

6. RESULTS AND DISCUSSION

6.1 Result
6.2 Output

7. CONCLUSION
7.1
7.2
7.3
7.4

REFERENCES

vi
 LIST OF FIGURES

No Name Page no
1 Fig 5.1 Adding and matching photos 13
2 Fig 5.2 Basic layout that was created 13
3 Fig 5.3 Setting viewports for individual nodes 14
4 Fig 5.4 Adding viewports defaults 14
5 Fig 5.5 Making and adding skins to the layout of 15
the tour
6 Fig 5.6 Get pixels recognize as points or 15
polygons to map objects
7 Fig 5.7 Make functions and classes to do 16
something with polygons
8 Fig 5.8 Get an external link to work with the 16
functions that were made
9 Fig 5.9 Virtual tour processing 18
10 Fig 5.10 Selection of books 19
11 Fig 6.1 Login 20
12 Fig 6.2 Teleportation tab 21
13 Fig 6.3.1 Virtual Tour 21
14 Fig 6.3.2 Virtual Tour 22
15 Fig 6.3.3 Virtual Tour 22

vii
 Mini Project Report <PROJECT NAME>

CHAPTER 1
INTRODUCTION

1.1 GENERAL BACKGROUND

1.2 MOTIVATION

1.3 OVERVIEW OF THE REPORT

1.4 PROPOSED SYSTEM

1.5 OBJECTIVES

1.6 SIGNIFICANCE OF THE SYSTEM

Department of Information Technology Amal Jyothi College of Engineering 8

 Mini Project Report <PROJECT NAME>

CHAPTER 2

LITERATURE REVIEW

2.1The Research and application of Augmented Reality Technologies

Authored By: Jun HE, Peng HAN, Huan LIU, Shiying MEN, Lu JU, Pu
ZHEN, Ting WANG

Year: 2017 [3]

With the rapid development of computer 3D processing capacity and the emergence of low-
cost sensors, the technology of augmented reality (AR) and virtual reality (VR) has advanced
quickly in recent years, especially in combination with real-world technologies. Firstly, the
concepts are summarized, and the difference and connection are analyzed between AR and
VR. Then, a typical AR system with software and hardware architecture was presented based
on the current research achievements. Three key techniques and related research are
introduced in detail. Finally, application of AR in various areas is introduced, especially in
the field of military system, equipment support and training simulation.

Department of Information Technology Amal Jyothi College of Engineering 9

 Mini Project Report <PROJECT NAME>

CHAPTER 3
SYSTEM REQUIREMENTS AND DESIGN OVERVIEW

3.1 FUNCTIONAL REQUIREMENTS

3.2 SYSTEM DESIGN

Department of Information Technology Amal Jyothi College of Engineering 10

 Mini Project Report <PROJECT NAME>

CHAPTER 4
METHODOLOGY

Department of Information Technology Amal Jyothi College of Engineering 11

 Mini Project Report <PROJECT NAME>

CHAPTER 5

IMPLEMENTATION

Department of Information Technology Amal Jyothi College of Engineering 12

 Mini Project Report <PROJECT NAME>

CHAPTER 6
RESULTS AND DISCUSSION

6.1 RESULT
6.2 OUTPUT

Fig 6.1 Login

Department of Information Technology Amal Jyothi College of Engineering 13

 Mini Project Report <PROJECT NAME>

Fig 6.3.1 Virtual Tour

Fig 6.3.2 Virtual tour

Department of Information Technology Amal Jyothi College of Engineering 14

 Mini Project Report <PROJECT NAME>

Fig 6.3.3 Virtual Tour

Department of Information Technology Amal Jyothi College of Engineering 15

 Mini Project Report <PROJECT NAME>

CHAPTER 7
CONCLUSION

7.1 APPLICATIONS OF THE PROPOSED SYSTEM

7.2 LIMITATIONS OF THE PROPOSED SYSTEM

7.3 FUTURE SCOPE

7.4 CONCLUSION

Department of Information Technology Amal Jyothi College of Engineering 16

 Mini Project Report <PROJECT NAME>

REFERENCES

1. Ariponnammal, S. and Natarajan, S. (1994) ‘Transport Phonomena of Sm Sel – X

Asx’, Pramana – Journal of Physics Vol.42, No.1, pp.421-425.

2. Barnard, R.W. and Kellogg, C. (1980) ‘Applications of Convolution Operators to

Problems in Univalent Function Theory’, Michigan Mach, J., Vol.27, pp.81–94.

3. Shin, K.G. and Mckay, N.D. (1984) ‘Open Loop Minimum Time Control of
Mechanical Manipulations and its Applications’, Proc.Amer.Contr.Conf., San Diego,
CA, pp. 1231-1236.

Department of Information Technology Amal Jyothi College of Engineering 17