Instruction Manual GB
Time switch müller SC 18.10 pro / SC 28.X0 pro / SC 28.X1 pro paladin 170 410 pro / 172 4X0 pro / 172 4X1 pro
Connection diagram Directory 1. Safety instructions 2. Initial operation
SC 28.10 pro / 172 410 pro
SC 28.11 pro / 172 411 pro
SC 18.10 pro / 170 410 pro 1. Safety instructions ! The installation and assembly of electrical equipment The time switch is delivered in sleep-mode, the display is switched off.
2. Initial operation must be only carried out only by a skilled Person! Press -button for 1 second.
1 channel
3. Menu overview
4. Symbol legend
Otherwise fire danger or danger of an electric shock
exists!
The current date and time is already programmed and European daylight
savings time is activated.
5. Key function
6. Handling advice
7. Channel ON OFF / Permanent P
! Connect the supply voltage/frequency as stated on the
product label!
Select the desired language by pressing -buttons and confirm it by
pressing . (Remark: By pressing you move one step backwards from
8. New Program ! Warranty void if housing opened by unauthorised the current position)
SC 28.20 pro / SC 28.21 pro / SC 172 420 pro / 172 421 pro
9. Example „New Program“
10. Pulse
person! Ifbyrequired,
pressing
date, time and daylight savings time mode can be adjusted also
-buttons and a subsequent confirmation with .
2 channels
11. Program permanent ! The electronic circuit is protected against a wide range
12. Additional adjustments of external influences. Incorrect operating may occur if
13. Program modify external influences exceed certain limits!
14. Data-key*
3. Menu overview 4. Symbol legend
Channel is switched ON
Channel is switched OFF
For the current date the “holiday program” / “permanent by date” is activated
Standard programming step
Current state is based on a manual over-ride. The state will be cancelled with the next programming step.
Current state is based on a manual over-ride. The state is permanent until terminated manually (7).
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Element within sub-menu “program delete”
The time switch is locked; to unlock the device the PIN has to be entered (12).
5. Key function 6. Handling advice 7. Channel ON OFF / Permanent P
1. To access the Enter-mode (program, adjustments, options) from the automatic-mode. The time switch is programmable without external power supply after
pressing the -button.
Channel ON OFF
2. To revert to the beginning of the current (sub-) menu. By pushing -buttons ( -buttons) a manual switch of the
1. To adjust the flashing digit.
To revert one step or one level back while in the Enter-Mode press . channels take place. The resulting switching status is marked
2. To scroll through a choice
After completion of a (sub-) menu confirming end will return the device
into the automatic-mode.
with the hand-symbol and remains until the next programming
step occurs. (temporary over-ride)
1. Automatic-mode: To switch the channel ON or OFF until the next programming step occurs. With the choice changes from end to continue. By confirming
continue the time switch returns to the beginning of the current
Permanent switching status P
2. Automatic-mode: A push longer than 3 sec. = Permanent switching status (7). By pressing the corresponding channel button for more
(sub-) menu. than 3 sec. the channel is permanently switched ON or OFF.
1. To activate the time switch when operated without power supply. When confirming end before completion, the time switch returns to the
automatic-mode without saving the entered data.
The status remains until the next manual switching occurs (> 3
2. To confirm the selection or the entered data. sec.). (permanent over-ride)
8. New Program (See also the example (9)) 9. Example „New Program“ (For a regular switching time)
Step A. to C. please refer to point 9. (Example “New Program”)
A. If power supply is disconnected press for one second. The display appears in Automatic-Mode.
B. Press , the time switch is now in the Enter-Mode.
C. Confirm Program with .
D. Confirm new program with .
E. Choose the desired channel with and confirm with .
F. For regular switching times choose on or off with -buttons and confirm with .
G. Within this level you activate the days of the week (1…7) on which the switching time should happen.
With you activate “yes” or deactivate “no” the corresponding date. Confirm each day with .
H. Adjustment of the time: Hours and . Minutes and .
I. Verify the entered switching time: If the flashing summary of the programming step is correct, verify on or
off with . After verification you have the choice between edit/delete and end with .
J. If you want to proceed with programming, confirm next switching with .
To leave the programming menu confirm end.
10. Pulse 11. Program permanent
Program -> New program -> Channel A/B -> … Program -> new program -> channel A/B -> permanent -> …
The pulse function provides you the opportunity of programming a switching time with a defined duration.
As soon as the pulse-duration has expired the time switch switches OFF automatically (the duration of the pulse is up to 59:59 mm:ss).
One permanent by date programming step (holiday function) for each channel is possible. During the
desired period (The function is valid for the whole days) the channel can be switched off ( permanent
The programming is carried out like a standard switching time (see point 8 / 9) with following differences off) or on (permanent on).
Choose Pulse function (9F). The programming of this function is as described in (8 / 9).
Define the duration of the pulse ( pulstime minute / pulstime second). The choice permanent will not be offered anymore within the menu new program when already in
Program the days of the week use. The switching time can be modified and deleted within Program modify (13) and Program
Program the switching time (time hour / time minute) delete (12) respectively.
Validation: Confirm the blinking summary of the pulse program
12. Additional adjustments 13. Program modify
Menu Main menu Application Program -> Program modify -> …
Program query Program To query the programming steps and remaining memory locations
Copy from one channel to another. Memory of the channel won’t
Program copy Program be overwritten; the copied switching steps appear additionally.
! Permanent by date function is not copied!
Deletion of switching time(s). The program for all channels, single
Program delete Program channels and single programming steps within on channel can be
deleted.
Date-Time Adjustment Adjustment of date and time
Summertime Adjustment Adjustment of the daylight saving time mode (ON/OFF)
Language Adjustment Choice of languages
Reset to the state of delivery. Within Program modify each single switching time can be modified.
Factory Defaults* Adjustment ! Date, time and switching program will be lost!
14. Data-key*
Displays the hour counter and pulse counter for each channel and With a Data-key following activities are possible:
Counter Options the time switch itself.
Save data: Writes the data from the time switch into the memory of the Data-key.
The time switch can be locked with a 4-digit PIN-Code. The code
Program timeswitch: Writes the data located inside the Key into the memory.
PIN-Code Options can be adjusted, activated and deactivated.
the Code please call customer service.
If you have forgotten
Key function: The time switch will solely apply programming steps from the Data-
key. The switching program of the time switch is suppressed.
Press all front keys for 2 seconds. The time switch is reset. The values for date
Key readout: To query the switching program of the Data-key.
Reset-Function and time will be deleted and have to be re-entered. The switching program has
not been deleted!
*OPTIONAL
www.hugo-mueller.de BA SC1810,28X0,28X1pro MP; DE, GB, FR, IT - 22397 - 2007.12-03
