Scribd
Upload
186 views

Calculating Scaffold Loads

The document provides guidance on calculating scaffold loads. It states that OSHA requires scaffolds to have a 4:1 safety factor and lists light, medium, and heavy duty load ratings of 25, 50, and 75 pounds per square foot respectively. It also gives an example of calculating the load for a tube and clamp scaffold with details like its height, bay length, width, and light duty working level load.

Uploaded by

claudio godinez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
186 views

Calculating Scaffold Loads

The document provides guidance on calculating scaffold loads. It states that OSHA requires scaffolds to have a 4:1 safety factor and lists light, medium, and heavy duty load ratings of 25, 50, and 75 pounds per square foot respectively. It also gives an example of calculating the load for a tube and clamp scaffold with details like its height, bay length, width, and light duty working level load.

Uploaded by

claudio godinez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

Calculating Scaffold

Loads
Loads
• OSHA requires that a scaffold be designed
with a 4:1 safety factor.
• Light duty: 25 pounds per square foot
• Medium duty: 50 pounds per square foot
• Heavy Duty: 75 pounds per square foot.
• Material loads should be evenly distributed on
platform and not concentrated in one small
area.
LOADS
Tube and Clamps
Scaffolds

Loads
The Posts (Standards) Carry the
Scaffold Loads
Scaffold Loads
Example
• A tube and clamp scaffold
• Three (3) levels – each (6.5 ft) 2 meters high
• One bay
• Bay length = 7 ft (2.25 meter)
• Bay Width = 5 ft (1.5 meter)
• One light duty working level (120 kg per
square meter). (25 pounds per square feet).
• Calculate the load
Total Weight
Example
• A tube and clamp scaffold
• Three (3) levels – each (6.5 ft) 2 meters high
• Three bays
• Bay length = 7 ft (2.25 meter)
• Bay Width = 5 ft (1.5 meter)
• One light duty working level (120 kg per
square meter). (25 pounds per square feet).
• Calculate the load
• TO calculate the dead Weight Of scaffold we must be aware
of all scaffold components as follows :-
• 1- posts - (vertical Pipe )
• 2- Bearers - (horizontal pipe perpendicular to the building
structure
• 3- Transverse braces - pipe which take a diagonal shape
when used
• 4- Right angle clamps
• 5- Swivel joint clamps
• 6- Toe boards
• 7- Runners
• 8 - Face bracing
• And now you can search about the data which you can
use it in scaffold building and then you can calculate the
live load and add it to the dead load to know the maximum
intended load in this scaffold per single leg.
Total Share factor Wight Quantity Part Source Ser.

1
400 1 40 10 10F post

2
16 1 16 1 4F Post

3
200 0.5 20 20 5F Bearer

4
224 0.5 32 14 8F zigzag

right angle 5
60 1 3 20 ------
clamp
6
56 1 4 13 ------ swivel clamp

7
20 0.5 20 2 4F Toe board

Runner for 8
320 0.5 32 20 8F
front view
9
right angle
60 1 3 20 ------ clamp for
front view
10
Toe board for
35 0.5 35 2 8F front view

Swivel joint 11
56 1 4 13 ------ clamp
Face bracing 12
280 0.5 40 14 10F

You might also like