VHF-2100 high speed Multi-mode Data Radio Презент
VHF-2100 high speed Multi-mode Data Radio Презент
Fully digital voice and data, and Key features Equipped for a Changing
analog capability. >> ARINC 750 and 716 compatible Environment
>> VDL Mode 3 Capability Airspace frequency congestion, Controller-
Leading the industry in its class, the >> DO-160D Change 3 compliant Pilot Data Link Communications (CPDLC)
Rockwell Collins VHF-2100 is a multi-mode, >> DO-178B Level C compliant initiatives, VDL Mode 3 and VDL Mode
very high frequency (VHF) data radio that >> DO-281 and ED-92 VDL Mode 2 MOPS 4 all contribute to uncertainty about
is low in weight and high on reliability. >> DO-271B VDL Mode 3 MOPS tomorrow’s airspace needs. Rockwell
Designed with tomorrow’s airspace in >> Meets ICAO Annex 10 requirements for Collins has relieved that uncertainty with
mind, the VHF-2100 provides fully digital FM immunity the VHF-2100. The system is designed to
voice and data radio capabilities while still >> ARINC 604 OMS/BITE Interface minimize those risks with the changing
delivering traditional analog abilities. And >> ARINC-615-3 Data Load Capable VHF environment. With additional memory,
we equipped the VHF-2100 with state- >> Dual bandwidth IF filters for 25 kHz and increased microprocessor power and
of-the-art technology, providing a path 8.33 kHz operation advanced RF technology, the VHF-2100 is
to future capabilities by enabling faster >> Ultra low phase noise frequency the multi-mode VHF mission-ready radio
communications to meet next generation synthesizer with 5 PPM stability available today and ready for tomorrow.
requirements. >> Automatic alignment when used with
RFT-1000 ATE
>> Extended Frequency version available to
151.975 MHz
Easily Integrates Selectivity
Rockwell Collins’ VHF-2100 combines well with the CMU-900 25 kHz channels 6 dB maximum attenuation at ±8 kHz
digital link router to create an integrated Communications, 60 dB minimum attenuation at ±16.67 kHz
Navigation, Surveillance/Air Traffic Management (CNS/ATM) 8.33 kHz channels 6 dB maximum attenuation at ±2.75 kHz
communication environment, featuring upgradeable CPDLC 60 dB minimum attenuation at ±7.35 kHz
that includes Future Air Navigation Systems (FANS), ACARS, VDL Audio power output Adjustable from 50 mW to less than
Mode2 and growth to ATN. VHF-2100 also supports existing 5 mW into 600 ±20% ohms,
installations and is compatible with VHF-700/700B, VHF-900/900B short circuit protected
and VHF-920. The system is compliant with ARINC 716 for 25 kHz SELCAL/data output 1 V RMS for 1,000 µV 80% modulation
and the European standardized 8.33 kHz AM-DSB voice operation at 1,800 Hz adjustable
from 118.000 to 136.992 MHz. Compliance with ARINC 750 ACARS
digital data communications at 2,400 bps AM-MSK for Mode A is Transmitter characteristics
also provided. Output power 25 W minimum DSB-AM operation
18 W minimum D8PSK operation
Mode 2 and Mode 3 Compliant Frequency stability ±0.0005%
Rockwell Collins’ VHF-2100 is VDL Mode 2 ARINC 750 compliant Modulation level 0.25 V RMS input at 1,000 Hz will
providing high-speed, air-to-ground digital data communications modulate the transmitter at least 90%
at 31,500 bps D8PSK CSMA modulation. VDL Mode 2 provides Data/SELCAL and microphone inputs
a significant capacity increase over the current Airborne are adjustable.
Communications Addressing and Reporting System (ACARS). Speech processing Greater than 20 dB of compression
(automatic volume control)
With VDL Mode 3, VHF-2100 delivers simultaneous digital voice
and data communications using Time Division Multiple Access
(TDMA) at 31,500 bps D8PSK modulation. The necessary digital *Equivalent to 0.157 block failure rate For 249 bytes (Mode 2)
voice Vocoder, approved by ICAO, is integrated into the radio.