MotoHawk* Control Solutions ECM Summary

Form Factor 24 Pin 48 Pin 70 Pin 80 Pin 112 Pin 128 Pin
Intended Control Function Engine / General Engine / Engine / General Hydraulic Engine / Engine / Engine / Engine / Engine / Engine / Engine /
Powertrain Purpose Powertrain Powertrain Purpose Powertrain Powertrain Powertrain Powertrain Powertrain Powertrain Powertrain
Series ECMS12-24 GCMS12-24 ECM555-48 ECM-563-48 GCM563-48 HCM563-48 ECMS12X-70 ECM5634-70 ECM555-80 ECM5554-112 ECM5642-112 ECM5644-112 ECM565-128
Series Common Name SECM24 GCM24 ECM07 SECM48 GCM48 HCM48 ECM70 SECM70 PCM80 PCM09 SECM112 PCM112 PCM128/PCM-HD
Microcontroller Freescale Freescale Freescale Freescale Freescale Freescale Freescale ST MPC5634M Freescale Freescale Freescale MPC5642A Freescale MPC5644A Freescale
re HCS12 HCS12 MPC555 MPC563 MPC563 MPC563 HCS12XE MPC555 MPC5554 & HCS12G128 & HCS12G128 MPC565
Co Clock Frequency 24 MHz 24 MHz 40 MHz 56 MHz 56 MHz 56 MHz 50 MHz 80 MHz 40 MHz 80 MHz 120 MHz 120 MHz 56 MHz
Internal Flash 128 k 128 k 448 k 512 k 512 k 512 k 256 k 1.5 M 448 k 2M 2M 4M 1M
(1M on dev't version) (4 M on dev't version)
External Flash

EEPROM 2 k internal, 2 k internal 4 k or 8 k (serial) 16 k (serial) 16 k (serial) 16 k (serial) 4 k internal + 16 k (serial) 8 k (serial) 32 k (serial) 32 k (serial) 32 k (serial) 8 k (serial),
ry
mo (8 k serial optional) (dev't version: 128 k) (dev't version: 128 k) (dev't version: 128 k) (dev't version: 128 k) 8 k (serial) (dev't version: 128 k) opt. 128 k (parallel)
Me
Internal SRAM 2k 2k 26 k 32 k 32 k 32 k 16 k 94 k 26 k 64 k 128 k 192 k 36 k
(64 k on dev't version) (192 k on dev't version)
External SRAM 512 k 512 k (optional)
(dev't version only)
Supply Voltage 8–16 V 8–16 V 8–16 V 8–16 V 8–32 V 8–32 V 8–16 V 8-32V 8–16 V 8–16 V 8-32V 8–16 V 9–32 V
(0802 only: 8-16 V)
Emergency Stop Inputs 1 1 1 1 1 1 1
Switch Inputs 4 switch to battery 4 switch to GND 4 switch to GND 1 switch to GND 4 switch to GND, 1 switch
to BATT
Frequency Inputs 4 Hall-type (PU) 1 VR/Hall Up to 6 Hall-type (PU), Up to 4 Hall-type (PU), 3 Hall-type (PU) 1 Hall-type (PU) 3 Hall-type (PU) Up to 4 Hall-type (PU) Up to 6 Hall-type (PU) 2 Hall-type (PU) Up to 8 Hall-type (PU),
(SW selectable) and up to 2 VR/Hall and up to 2 VR/Hall and 4 VR/Hall (SW
(SW selectable) (SW selectable) Selectable)
uts Engine Position Input Type VR/Hall mode VR or Hall VR/Hall Both VR and Hall input VR CNK and Hall CAM Both VR and Hall input Both VR & Hall input Both VR and Hall input Both VR and Hall input VR/Hall
Inp (SW selectable) (model dependent) (SW selectable) pins available pins available pins available pins available pins available (SW selectable)
Analog Inputs (10-bit) 7–12 6 12 Up to 19 Up to 18 Up to 16 18 15 Up to 19 33 31 23 Up to 34

Knock Inputs 1 or 2 (DSP) 1 (DSP, optional) 0 or 1 (DSP) 1 or 2 2 (DSP) 2 (DSP) 2 (DSP) 2 (DSP) 2 or 4 (DSP)
O2 Sensor Inputs 1 single-ended EGO (opt.) 3 single-wire EGO 2 single-ended EGO 2 EGO or 2 differential EGO 4 differential EGO 2 EGO and 2 UEGO or 4 differential EGO & 2 2 UEGO (Bosch wide-
(optional) 1 EGO and 1 UEGO (optional) 4 EGO UEGO range); 2 differential EGO
(opt.); 2 single-wire EGO
High-Current Drivers (6A+) 1 or 2 low-side (PWM) 1 low-side (PWM) 1 low-side 7 low-side PWM (up to 3
w/current sense)
Medium-Current Drivers (1-5A) 1 –4 low-side 5 low-side 1 low-side PWM, up to 5 low-side 4 low-side PWM (2 w/ 6 low-side PWM w/current 2 low-side PWM 2 low-side PWM Up to 6 low-side PWM 4 low-side (w/HEGO 7-11 low-side (1 w/current 6 low-side 10 low-side PWM (2
1 low-side discrete (up to 2 PWM) current sense), 1 low-side sense, 5 low-side diagnostics) sense) w/current sense)
and 2 high-side (discrete) (discrete)
Current-Controlled Drivers 2 (1 A)
Low-Current Drivers (500 mA) 1 low-side 1 low-side PWM 1 low-side 1 low-side 1 low-side 1 low-side PWM 3 low-side 2 low-side 5 low-side 8 low-side + 1 TACH 5 low-side + 1 TACH 1
Relay Drivers (<250 mA) 5 2 low-side 3 analog gauge drivers
Main Power Relay Low-Side Driver 1 1 1 1 1 1 1 1 1 1 1
Injector Drivers 1 (up to 4 high- 4 (high-impedance) 4 (high-impedance) 4 (high-impedance) 6 (up to 4 capable of 12 (3A/1A peak/hold) 8 (high-impedance) 8 high-impedance or 6 8 (high-impedance) 12 - 3 A/1 A peak/hold
impedance loads) peak/hold) peak/hold (up to 7A/2A) (6 are 7 A/2.5 A
SW selectable)
Logic Outputs or Spark Triggers 0 or 3 (5 V) triggers 4 (5 V), 1 (12 V) 8 (5 V), 1 (12 V) 1 (5 V) 1 (5 V) 1 (12 V) Up to 8 (5 V) 8 (5 V) triggers 8 (5 V) triggers, 1 (12 V) 0 (8 optional) 12 or 16 (5 A) triggers,
ts
tpu 1 (12 V)
Ou Direct Ignition Coil Drivers 2 or 3 6 (8 optional) 4

Low-Current H-bridge Driver 0 or 1 (5 A) w/ current 1 or 2 (5 A) w/current 1 (4 A w/current sense) 1 (5 A, opt.) 1 (5 A w/current sense)
sense sense +1 opt. (2.5A w/cur sense) 1 (2.5 A w/current sense)
High-Current H-bridge Driver 1 (15 A w/current sense) 1 (12 A discrete, optional) 2 (10 A w/current sense) 2 (10 A w/current sense) 3 (15 A w/current sense)

3-phase BLDC Driver 1 (optional)

Sensor Excitation 1 (5 V) sensor supply 1 (5 V) sensor supply 1 (5 V) sensor supply, 1 or 2 (5 V) sensor supply, 1 (5 V) sensor supply, 1 (5 V) sensor supply, 1 or 2 (5 V) sensor 1 (5 V) sensor supply, 350 2 (5 V) sensor supplies, 2 (5 V) sensor supplies, 2 (5 V) sensor supplies, 3 (5 V) sensor supplies, 2 (5 V) sensor supplies,
(250 mA max) (250 mA max) 350 mA max. 350 mA max. 300 mA max. 300 mA max. supplies, 100 mA max. mA max. (350 mA max.) (50 mA and 100 mA) (350 mA and 100 mA) (1) 50 mA, (2) 100 mA (350 mA max.)
1 (12V) sensor supply
(100mA)
CAN 2.0B 1 or 2 2 1 1 or 2 3 2 1 or 2 2 1 or 2 3 3 3 2
ns USB1.1
tio
ica Serial RS-485 ( optional) RS-485 (optional)\ RS-485 (optional) RS-485 RS-485 ( optional) RS-485 RS-485,( optional)
un
mm Shutdown Not SW controlled SW controlled SWS controlled SW controlled SW controlled SW controlled SW controlled SW controlled SWS controlled SW controlled SW controlled SW controlled SWISO9141
controlled
Co (via MPRD relay) (via MPRD relay)
Operating Temperature Range -40–105 °C -40–105 °C -40–85 °C -40–105 °C -40–85 °C -40–85 °C -40–85 °C -40–105 °C -40–105 °C -40–105 °C -40–105 °C -40–105 °C -40–105 deg °C
al Construction Plastic housing Plastic housing Stamped Aluminum Stamped Aluminum Stamped Aluminum Stamped Aluminum Stamped Aluminum Stamped Aluminum Cast Aluminum with Cast Aluminum with Cast Aluminum Cast Aluminum Cast Aluminum
m ent E-Coat E-Coat
on
vir Connector 24-pin Delphi 24-pin Delphi 48-pin Tyco 48-pin Tyco 48-pin Tyco 48-pin Tyco 70-pin Tyco 70-pin Tyco 80-pin Tyco 112-pin Molex 112-pin Molex 112-pin Molex 80- and 48pin Tyco
En
Availability In Production In Production In Production In Production In Production In Production In Production In Production In Production In Production In Production Limited prototypes In Production
available, SOP Q3 2014

Publication No. 36328 (Rev. F) ECM = Engine Control Module GCM = General Control Module HCM = Hydraulic Control Module

Copyright © Woodward 2009-2017 PO Box 1519, Fort Collins CO, USA 80522-1519
1041 Woodward Way, Fort Collins CO 80524
This document is distributed for informational purposes only. It is not to Specifications subject to change without notice. Please contact your Woodward account manager for the latest specifications and availability. Tel.: +1 (970) 482-5811 Fax: +1 (970) 498-3058
be construed as creating or becoming part of any Woodward obligation Send inquiries to: [email protected]. *Trademark of Woodward, Inc. www.woodward.com
unless expressly stated in a written sales contract. 2017/5/Colorado