Scribd
Upload
868 views2 pages

Is 12823

This document is a test report for a sample of prelaminated particle board. It provides the results of testing the sample for conformity to Grade 1 Type 2 standards according to IS: 12823-1990. The report lists 16 tests conducted including dimensions, density, moisture content, water absorption, thickness swelling, modulus of rupture, tensile strength, screw withdrawal strength, and resistance to steam, cigarette burn, crack, and stain. The results are then stated as either conforming or not conforming to the Grade 1 standards.

Uploaded by

Pradeep K Kushwaha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
868 views2 pages

Is 12823

This document is a test report for a sample of prelaminated particle board. It provides the results of testing the sample for conformity to Grade 1 Type 2 standards according to IS: 12823-1990. The report lists 16 tests conducted including dimensions, density, moisture content, water absorption, thickness swelling, modulus of rupture, tensile strength, screw withdrawal strength, and resistance to steam, cigarette burn, crack, and stain. The results are then stated as either conforming or not conforming to the Grade 1 standards.

Uploaded by

Pradeep K Kushwaha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

No.

Date:

TEST REPORT One sample of Prelaminated Particle Board of thickness mm received from Ref: Letter No: Sample was tested for conformity to Grade1 Type 2 of IS: 12823-1990. Sample size: Code No. Sl. No. Tests 1. Dimensions,mm a) Length b) Width c) Thickness 2. Squareness, % 3. Edge straightness, % 4. Workmanship and Finish 5. Density. a) Average, Kg/m3 b) Variation from mean density, % 6. Moisture content, % a) Average b) Variation from mean moisture content 7. Water absorption, % a) After 2 hr. soaking b) After 24 hr. soaking 8. Thickness swelling( After 2 hr. soaking), % Prescribed Value Tolerances +6mm, -0mm +3mm, -0mm s 10% / s5% 0.2 0.2 Conform 500-900 s 10 5-15 s3 Max. 7 Max. 15 Max. 5 Results

-29. 10. Modulus of rupture, N/mm Tensile strength perpendicular to surface (Internal Bond Strength), N/mm2 a) Dry Test b) After accelerated water resistance test Screw withdrawal strength, N a) Face b) Edge(for 12mm and above) Abrasion resistance, No. of revolutions Resistance to steam Resistance to Cigarette burn Resistance to crack Resistance to stain
2

Min. 15 / 12.5

Min. 0.45 / 0.4 Min. 0.15 Min. 1250 Min. 850 450 Conform Conform Conform Conform

11.

12. 13. 14. 15. 16.

Sample conform/does not conform to Grade 1 of IS: 12823-1990. Note: Test results are relevant only to the material received for testing. Remnant of tested material if any will be retained for a period of 6 months only, from the date of issue of test report.

You might also like