elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?

p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 7/16/2021
88299 Leutkirch, Germany [email protected] Page 1/6

Compact Joystick J2
Now with new handle
The 321G joystick handle offers great functionality in the smallest space. It is available with up
to 6 buttons or with up to 4 buttons and a thumbwheel. The compact multi-functional handle
proves its worth, especially where the operator needs a sure touch.

With up to 6 buttons, installation from below

The J2 compact joystick is used in tractors for front loader control or in industrial trucks for controlling the forks. The push-buttons that can
be integrated in the handle enable the operation of further additional functions.

Space-saving design
High reliability and long service life thanks to contactless Hall-effect and reed technology
Analogue output signal (current/voltage, also redundant) or switching output possible
CAN-bus connection (CANopen / SAE J1939) available
IP67 protection class of electronics, ideal for harsh environmental conditions
Deflection ±20°
Available with various actuation types such as no detent / detent or centre position interlock
 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 7/16/2021
88299 Leutkirch, Germany [email protected] Page 2/6

Technical drawing

IMAGE 1/5: NEW OPTIONAL HANDLE 321G   IMAGE 2/5

IMAGE 3/5   IMAGE 4/5

IMAGE 5/5
 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 7/16/2021
88299 Leutkirch, Germany [email protected] Page 3/6

Product options

IMAGE 1/1
 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 7/16/2021
88299 Leutkirch, Germany [email protected] Page 4/6

Electrical data

Attribute J2A6... J2A7... J2CJ J2CO... J2D8...

Max. switching voltage – 48 V DC

Max. switching current – 0.3 A

Max. switching power – 10 W

Max. switching power – 10 VA

Contact form – NO

Polarity reversal protection yes –

Output signal min. 0.5 V DC –

Output signal max. 4.5 V DC –

Output signal analogue –

Output signal - centre

2.5 V DC –
position/zero position

EMC immunity (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895 –

EMC emission (Norm) DIN EN 13309, DIN EN ISO 14982, ISO 13766, DIN EN 12895 –

Operating voltage min. 4.5 V DC 10 V DC 9 V DC –

Operating voltage max. 5.5 V DC 30 V DC 36 V DC –

Current consumption max. 15 mA at 12 V max. 15 mA < 120 mA –

Load resistance min. 20000 Ohm –

Short-circuit resistance to
yes no yes no
GND

Short-circuit resistance to
yes no yes no
supply

Technology Hall Reed

Protocol – J1939 CANopen –

Node ID / Source Address – 0x70 0x11 –

Transmitting cycle – 100 ms –

Baud rate – 250 kBit/s –

Bus terminating resistor – no –

 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 7/16/2021
88299 Leutkirch, Germany [email protected] Page 5/6

Mechanical data

Attribute J2A6... J2A7... J2CJ J2CO... J2D8...

Max. lever load with

70 mm/250 N
specified lever length

Deflection ± 20 °

Actuation type multi axis

Service life, mechanical

1000000
(Cycles)

Material information

Attribute J2A6... J2A7... J2CJ J2CO... J2D8...

Housing material PBT

Shaft material 1.4305

Gaiter material NBR 438.40

Environmental conditions

Attribute J2A6... J2A7... J2CJ J2CO... J2D8...

Protection class, electronic IP67 DIN EN 60529

Operating temperature min. -25 °C

Max. operating temperature 85 °C

Min. storage temperature -40 °C

Max. storage temperature 85 °C

Installation

Attribute J2A6... J2A7... J2CJ J2CO... J2D8...

Installation from below

Mounting type screwed from above

 elobau GmbH & Co. KG Tel.: +49 (0) 7561 970-0 elobau.com/en/?p=2524
Zeppelinstr. 44 Fax: +49 (0) 7561 970-100 7/16/2021
88299 Leutkirch, Germany [email protected] Page 6/6

Connection

Attribute J2A6... J2A7... J2CJ J2CO... J2D8...

Connector type Mini-Fit Jr.

Cable length 0.3 m