DH-PFM378-B100-WB: Integrated Solar Power System (Without Lithium Battery)
DH-PFM378-B100-WB: Integrated Solar Power System (Without Lithium Battery)
DH-PFM378-B100-WB
Integrated Solar Power System (without Lithium Battery)
Maximum Power Point Tracking (MPPT) charging
controller
MPPT controller helps significantly improve the energy
utilization efficiency of the system, and raise the
charging efficiency by 10%–30% compared with
conventional PWM controller.
RS–485 communication
RS-485 port and standard Modbus protocol can satisfy
communication requirements in various scenarios.
Electronic protection
Series Overview Comprehensive electronic protection: Current limiting,
This integrated solar power system consists of solar short circuit, and reverse current protection of the
panels, Maximum Power Point Tracking (MPPT) solar panel; reverse connection, overvoltage, over-
charging controller, and mounting brackets. It provides discharge, and over-temperature protection of the
stable power supply for devices such as IP cameras with lithium battery; overload and short circuit protection.
high conversion charging controller. Compared with
conventional solar power systems, it is compact, Scene
portable, and easy to install, disassemble and maintain. General application
Suitable to be installed in places such as scenic spots,
Functions courtyards, roads, farms, communities, and small
Integrated die casting casing construction sites.
Compact structure integrated with solar panel and Small business application
charging controller to improve the appearance, Applicable to scenarios where power is difficult to
installation, and maintenance of the system. obtain, such as mining areas, oil/power transmission
lines, forest fire prevention, and water conservancy.
Monocrystalline silicon solar panel Special application
Adopt efficient monocrystalline silicon solar panel to Temporary monitoring of mobile toilets, mobile
greatly improve light absorbance efficiency and power garbage stations, outdoor small-scale competitions,
generation performance with dusky light. and more.
www.dahuasecurity.com
Power Series | DH-PFM378-B100-WB
Technical Specification
Solar Panel
Type Monocrystalline silicon
Max. Power 100W
Output Voltage 18.8Vdc
CSA standard M15 2-pin water-
Output Interface IPC-HFW3241DF-AS-4G
proof plug(female)
4G Bullet Network Camera
Structure
Bracket Material Q235 steel / aluminum
Dimensions(mm)
Hot dip galvanizing / plastic
Surface Treatment
spraying / welding
Bracket Color White
Adjustable Angle of
30°/50°/70°
Bracket
Pole mount,installed on 80mm
Installation
to 150mm poles
815mmx846.8mmx893.3mm
Product Dimensions
(32.1”x33.3”x35.2”)
Net Weight 21.5kg(47.40lb)
Environment
Operating Altitude <3000m
Areas with daily solar
Operating Area
radiation >4 h Application
Operating
–20°C to 60°C (–4°F to 140°F)
Temperature
Operating Humidity <95%(RH)
Storage Temperature 0°C to 40°C (32°F to 104°F)
Storage Humidity <95%(RH)
Compatibility
DC12V, average power
Power Consumption
consumption<6W
of 4G Camera
(Recommend IPC-HFW3241DF-AS-4G)
Accessories
Optional:
PFM372-L45-4S14P
Integrated Solar Lithium Battery
Rev 001.001 © 2021 Dahua. All rights reserved. Design and specifications are subject to change without notice.
www.dahuasecurity.com