Scribd
Upload
136 views

Wps Qualification Check Test Requirments

The document summarizes mechanical testing requirements for welded joints including: 1. Two transverse tensile tests per the ASME BPVC Section IX standards. 2. Four transverse bend tests per the ASME BPVC Section IX standards. 3. One macroscopic examination with photos per the EN ISO 15614 standards at Level 2. 4. One impact test at minus 196°C per the ASME and EN ISO standards, reporting lateral expansion and minimum 40J energy for full specimens.

Uploaded by

bmanojkumar16
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
136 views

Wps Qualification Check Test Requirments

The document summarizes mechanical testing requirements for welded joints including: 1. Two transverse tensile tests per the ASME BPVC Section IX standards. 2. Four transverse bend tests per the ASME BPVC Section IX standards. 3. One macroscopic examination with photos per the EN ISO 15614 standards at Level 2. 4. One impact test at minus 196°C per the ASME and EN ISO standards, reporting lateral expansion and minimum 40J energy for full specimens.

Uploaded by

bmanojkumar16
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Heat  

Joi Weld Weld


Joi nt er ID er
Spo Joi
Sn Material spec & nt Siz SC Thk Name
ol nt WPS No
o: grade Typ e H in
No. No.
e m
m
TC- SA 312 11T5 B   8.5 VTME- VTM Ranji
1 J1 4" 80
1 TP316/316L 16 W 6 WPS/27 E-44 th
TC- SA 312 11T5 B   8.5 VTME- VTM Ranji
2 J1 4" 80
2 TP316/316L 16 W 6 WPS/27 E-44 th
TC- SA 312 11T5 B   8.5 VTME- VTM Ranji
3 J1 4" 80
3 TP316/316L 16 W 6 WPS/27 E-44 th

  Mechanical Testing
Number of
  Tests Test Method Acceptance Criteria Remarks
Tests
ASME BPVC ASME BPVC Section IX
Transverse
1 Section IX Edition Edition 2021, 2 Nos.  
Tensile Test
2021, QW-150 QW-153

ASME BPVC ASME BPVC Section IX


Transverse
2 Section IX Edition Edition 2021, 4 nos.  
Bend Test
2021, QW-160 QW-163

CL. 7.4.3 & 7.5 of EN ISO


Macroscopic EN ISO 17639: 01 with
3 15614-1: 2017 + A1:  
Examination 2022 Photo
2019  Level 2
ASME Section VIII Div
1 :2021, UG -84 and UHA-
Impact Test at minus 196°C MDMT
51(e). PM, Weld &
4 at Required EN ISO 148-1: 2016 / Lateral Expansion shall aslo be
Minimum impact energy HAZ
Temperature reported
value 40J (50J/cm2) for
Full size specimen.
EN ISO 9015-1:
Required Value: As per 1 No.
Hardness 2011
5 Client Specification: Max. (Weld, HAZ Other Tests
Test (Vickers Hardness
248 HV10 & PM)
HV-10)
Chemical
Analysis ASME Sec. II Part C: 2021,
6 ASTM A751: 2021 Weld Other Tests
Weld SFA-5.9
Deposit.

You might also like